diff options
| -rw-r--r-- | doc/emacs/dired.texi | 48 | ||||
| -rw-r--r-- | doc/emacs/files.texi | 3 | ||||
| -rw-r--r-- | doc/lispref/internals.texi | 41 | ||||
| -rw-r--r-- | doc/lispref/variables.texi | 34 | ||||
| -rw-r--r-- | doc/lispref/windows.texi | 2 | ||||
| -rw-r--r-- | etc/NEWS.26 | 4 | ||||
| -rw-r--r-- | lisp/emacs-lisp/eieio-base.el | 47 | ||||
| -rw-r--r-- | lisp/gnus/gnus-cloud.el | 12 | ||||
| -rw-r--r-- | lisp/ibuf-ext.el | 2 | ||||
| -rw-r--r-- | msdos/sed2v2.inp | 1 | ||||
| -rw-r--r-- | test/lisp/emacs-lisp/eieio-tests/eieio-test-persist.el | 121 |
11 files changed, 249 insertions, 66 deletions
diff --git a/doc/emacs/dired.texi b/doc/emacs/dired.texi index cbf4194d397..fbb3030c2a4 100644 --- a/doc/emacs/dired.texi +++ b/doc/emacs/dired.texi @@ -12,7 +12,8 @@ Dired makes an Emacs buffer containing a listing of a directory, and optionally some of its subdirectories as well. You can use the normal Emacs commands to move around in this buffer, and special Dired -commands to operate on the listed files. +commands to operate on the listed files. Dired works with both local +and remote directories. The Dired buffer is normally read-only, and inserting text in it is not allowed (however, the Wdired mode allows that, @pxref{Wdired}). @@ -109,8 +110,9 @@ default) means to perform the check; any other non-@code{nil} value means to use the @samp{--dired} option; and @code{nil} means not to use the @samp{--dired} option. - On MS-Windows and MS-DOS systems, Emacs emulates @command{ls}. -@xref{ls in Lisp}, for options and peculiarities of this emulation. + On MS-Windows and MS-DOS systems, and also on some remote systems, +Emacs emulates @command{ls}. @xref{ls in Lisp}, for options and +peculiarities of this emulation. @findex dired-other-window @kindex C-x 4 d @@ -131,10 +133,13 @@ deletes its window if the window was created just for that buffer. @kindex C-n @r{(Dired)} @kindex C-p @r{(Dired)} +@findex dired-next-line +@findex dired-previous-line All the usual Emacs cursor motion commands are available in Dired -buffers. The keys @kbd{C-n} and @kbd{C-p} are redefined to put the -cursor at the beginning of the file name on the line, rather than at -the beginning of the line. +buffers. The keys @kbd{C-n} and @kbd{C-p} are redefined to run +@code{dired-next-line} and @code{dired-previous-line}, respectively, +and they put the cursor at the beginning of the file name on the line, +rather than at the beginning of the line. @kindex SPC @r{(Dired)} For extra convenience, @key{SPC} and @kbd{n} in Dired are equivalent @@ -235,10 +240,11 @@ the buffer, and no files actually deleted. You can delete empty directories just like other files, but normally Dired cannot delete directories that are nonempty. If the variable @code{dired-recursive-deletes} is non-@code{nil}, then Dired can -delete nonempty directories including all their contents. That can -be somewhat risky. -Even if you have set @code{dired-recursive-deletes} to @code{nil}, -you might want sometimes to delete recursively directories +delete nonempty directories including all their contents. That can be +somewhat risky. If the value of the variable is @code{always}, Dired +will delete nonempty directories recursively, which is even more +risky. Even if you have set @code{dired-recursive-deletes} to +@code{nil}, you might want sometimes to delete recursively directories without being asked for confirmation for all of them. This is handy when you have marked many directories for deletion and you are very sure that all of them can safely be deleted. For every nonempty @@ -252,6 +258,9 @@ questions. directories into the operating system's Trash, instead of deleting them outright. @xref{Misc File Ops}. + An alternative way of deleting files is to mark them with @kbd{m} +and delete with @kbd{D}, see @ref{Operating on Files}. + @node Flagging Many Files @section Flagging Many Files at Once @cindex flagging many files for deletion (in Dired) @@ -420,7 +429,9 @@ Mark the current file with @samp{*} (@code{dired-mark}). If the region is active, mark all files in the region instead; otherwise, if a numeric argument @var{n} is supplied, mark the next @var{n} files instead, starting with the current file (if @var{n} is negative, mark -the previous @minus{}@var{n} files). +the previous @minus{}@var{n} files). If invoked on a subdirectory +header line (@pxref{Subdirectories in Dired}), this command marks all +the files in that subdirectory. @item * * @kindex * * @r{(Dired)} @@ -578,10 +589,10 @@ command will look in the buffer without revisiting the file, so the results might be inconsistent with the file on disk if its contents have changed since it was last visited. If you don't want this, you may wish to revert the files you have visited in your buffers, or to turn on -@code{auto-revert} mode in those buffers, before invoking this -command. @xref{Reverting}. If you prefer that this command should always +Auto-Revert mode in those buffers, before invoking this command. +@xref{Reverting}. If you prefer that this command should always revisit the file, without you having to revert the file or enable -@code{auto-revert} mode, you might want to set +Auto-Revert mode, you might want to set @code{dired-always-read-filesystem} to non-@code{nil}. @item C-/ @@ -766,7 +777,9 @@ suitable guess made using the variables @code{lpr-command} and @item Z Compress the specified files (@code{dired-do-compress}). If the file appears to be a compressed file already, uncompress it instead. Each -marked file is compressed into its own archive. +marked file is compressed into its own archive. This uses the +@command{gzip} program if it is available, otherwise it uses +@command{compress}. @findex dired-do-compress-to @kindex c @r{(Dired)} @@ -1048,6 +1061,9 @@ minibuffer is the file at the mark (i.e., the ordinary Emacs mark, not a Dired mark; @pxref{Setting Mark}). Otherwise, if the file at point has a backup file (@pxref{Backup}), that is the default. + You could also compare files using @code{ediff-files}, see +@ref{Major Entry Points,,, ediff, Ediff User's Manual}. + @node Subdirectories in Dired @section Subdirectories in Dired @cindex subdirectories in Dired @@ -1476,7 +1492,7 @@ space. each marked file. With just @kbd{C-u} as the prefix argument, it uses file names relative to the Dired buffer's default directory. (This can still contain slashes if in a subdirectory.) As a special case, -if point is on a directory headerline, @kbd{w} gives you the absolute +if point is on a directory header line, @kbd{w} gives you the absolute name of that directory. Any prefix argument or marked files are ignored in this case. diff --git a/doc/emacs/files.texi b/doc/emacs/files.texi index 77bdb6ee448..4e9e7ac3f0a 100644 --- a/doc/emacs/files.texi +++ b/doc/emacs/files.texi @@ -991,6 +991,9 @@ Auto-Revert Tail mode works also for remote files. When a buffer is auto-reverted, a message is generated. This can be suppressed by setting @code{auto-revert-verbose} to @code{nil}. + In Dired buffers (@pxref{Dired}), Auto-Revert mode refreshes the +buffer when a file is created or deleted in the buffer's directory. + @xref{VC Undo}, for commands to revert to earlier versions of files under version control. @xref{VC Mode Line}, for Auto Revert peculiarities when visiting files under version control. diff --git a/doc/lispref/internals.texi b/doc/lispref/internals.texi index 76be7bf0ac6..7ae5b5c693d 100644 --- a/doc/lispref/internals.texi +++ b/doc/lispref/internals.texi @@ -735,7 +735,7 @@ Lisp form. For example: @example @group -DEFUN ("foo", Ffoo, Sfoo, 0, UNEVALLED, +DEFUN ("foo", Ffoo, Sfoo, 0, UNEVALLED, 0 "(list (read-char-by-name \"Insert character: \")\ (prefix-numeric-value current-prefix-arg)\ t))", @@ -768,6 +768,43 @@ the actual documentation. The others have placeholders beginning with All the usual rules for documentation strings in Lisp code (@pxref{Documentation Tips}) apply to C code documentation strings too. + +The documentation string can be followed by a list of C function +attributes for the C function that implements the primitive, like +this: + +@example +@group +DEFUN ("bar", Fbar, Sbar, 0, UNEVALLED, 0 + doc: /* @dots{} /* + attributes: @var{attr1} @var{attr2} @dots{}) +@end group +@end example + +@noindent +You can specify more than a single attribute, one after the other. +Currently, only the following attributes are recognized: + +@table @code +@item noreturn +Declares the C function as one that never returns. This corresponds +to the C11 keyword @code{_Noreturn} and to @w{@code{__attribute__ +((__noreturn__))}} attribute of GCC (@pxref{Function Attributes,,, +gcc, Using the GNU Compiler Collection}). + +@item const +Declares that the function does not examine any values except its +arguments, and has no effects except the return value. This +corresponds to @w{@code{__attribute__ ((__const__))}} attribute of +GCC. + +@item noinline +This corresponds to @w{@code{__attribute__ ((__noinline__))}} +attribute of GCC, which prevents the function from being considered +for inlining. This might be needed, e.g., to countermand effects of +link-time optimizations on stack-based variables. +@end table + @end table After the call to the @code{DEFUN} macro, you must write the @@ -850,7 +887,7 @@ defined with @code{DEFVAR_BOOL} are automatically added to the list @code{byte-boolean-vars} used by the byte compiler. @cindex defining customization variables in C - If you want to make a Lisp variables that is defined in C behave + If you want to make a Lisp variable that is defined in C behave like one declared with @code{defcustom}, add an appropriate entry to @file{cus-start.el}. diff --git a/doc/lispref/variables.texi b/doc/lispref/variables.texi index aecee6f3056..b80bc88a585 100644 --- a/doc/lispref/variables.texi +++ b/doc/lispref/variables.texi @@ -2317,11 +2317,12 @@ Attempting to assign them any other value will result in an error: @cindex generalized variable @cindex place form -A @dfn{generalized variable} or @dfn{place form} is one of the many places -in Lisp memory where values can be stored. The simplest place form is -a regular Lisp variable. But the @sc{car}s and @sc{cdr}s of lists, elements -of arrays, properties of symbols, and many other locations are also -places where Lisp values are stored. +A @dfn{generalized variable} or @dfn{place form} is one of the many +places in Lisp memory where values can be stored using the @code{setf} +macro (@pxref{Setting Generalized Variables}). The simplest place +form is a regular Lisp variable. But the @sc{car}s and @sc{cdr}s of +lists, elements of arrays, properties of symbols, and many other +locations are also places where Lisp values get stored. Generalized variables are analogous to lvalues in the C language, where @samp{x = a[i]} gets an element from an array @@ -2342,8 +2343,8 @@ variables. The @code{setf} form is like @code{setq}, except that it accepts arbitrary place forms on the left side rather than just symbols. For example, @code{(setf (car a) b)} sets the car of @code{a} to @code{b}, doing the same operation as @code{(setcar a b)}, -but without having to remember two separate functions for setting and -accessing every type of place. +but without you having to use two separate functions for setting and +accessing this type of place. @defmac setf [place form]@dots{} This macro evaluates @var{form} and stores it in @var{place}, which @@ -2353,18 +2354,19 @@ just as with @code{setq}. @code{setf} returns the value of the last @var{form}. @end defmac -The following Lisp forms will work as generalized variables, and -so may appear in the @var{place} argument of @code{setf}: +The following Lisp forms are the forms in Emacs that will work as +generalized variables, and so may appear in the @var{place} argument +of @code{setf}: @itemize @item -A symbol naming a variable. In other words, @code{(setf x y)} is -exactly equivalent to @code{(setq x y)}, and @code{setq} itself is -strictly speaking redundant given that @code{setf} exists. Many -programmers continue to prefer @code{setq} for setting simple -variables, though, purely for stylistic or historical reasons. -The macro @code{(setf x y)} actually expands to @code{(setq x y)}, -so there is no performance penalty for using it in compiled code. +A symbol. In other words, @code{(setf x y)} is exactly equivalent to +@code{(setq x y)}, and @code{setq} itself is strictly speaking +redundant given that @code{setf} exists. Most programmers will +continue to prefer @code{setq} for setting simple variables, though, +for stylistic and historical reasons. The macro @code{(setf x y)} +actually expands to @code{(setq x y)}, so there is no performance +penalty for using it in compiled code. @item A call to any of the following standard Lisp functions: diff --git a/doc/lispref/windows.texi b/doc/lispref/windows.texi index 75651b99fde..8d8877bdfda 100644 --- a/doc/lispref/windows.texi +++ b/doc/lispref/windows.texi @@ -1772,7 +1772,7 @@ raise the frame or make sure input focus is directed to that frame. @end defun @cindex select window hook -@cindex running a hook when a windows gets selected +@cindex running a hook when a window gets selected For historical reasons, Emacs does not run a separate hook whenever a window gets selected. Applications and internal routines often temporarily select a window to perform a few actions on it. They do diff --git a/etc/NEWS.26 b/etc/NEWS.26 index eded00e6554..f5da6870b77 100644 --- a/etc/NEWS.26 +++ b/etc/NEWS.26 @@ -1274,6 +1274,10 @@ specialized for editing freedesktop.org desktop entries. ** New major mode 'less-css-mode' (a minor variant of 'css-mode') for editing Less files. ++++ +** New package 'auth-source-pass' integrates 'auth-source' with the +password manager password-store (http://passwordstore.org). + * Incompatible Lisp Changes in Emacs 26.1 diff --git a/lisp/emacs-lisp/eieio-base.el b/lisp/emacs-lisp/eieio-base.el index c0ad7ac4605..9f9f870a757 100644 --- a/lisp/emacs-lisp/eieio-base.el +++ b/lisp/emacs-lisp/eieio-base.el @@ -219,7 +219,7 @@ for CLASS. Optional ALLOW-SUBCLASS says that it is ok for `eieio-persistent-read' to load in subclasses of class instead of being pedantic." (unless class - (message "Unsafe call to `eieio-persistent-read'.")) + (warn "`eieio-persistent-read' called without specifying a class")) (when class (cl-check-type class class)) (let ((ret nil) (buffstr nil)) @@ -234,13 +234,16 @@ being pedantic." ;; the current buffer will work. (setq ret (read buffstr)) (when (not (child-of-class-p (car ret) 'eieio-persistent)) - (error "Corrupt object on disk: Unknown saved object")) + (error + "Invalid object: %s is not a subclass of `eieio-persistent'" + (car ret))) (when (and class - (not (or (eq (car ret) class ) ; same class - (and allow-subclass - (child-of-class-p (car ret) class)) ; subclasses - ))) - (error "Corrupt object on disk: Invalid saved class")) + (not (or (eq (car ret) class) ; same class + (and allow-subclass ; subclass + (child-of-class-p (car ret) class))))) + (error + "Invalid object: %s is not an object of class %s nor a subclass" + (car ret) class)) (setq ret (eieio-persistent-convert-list-to-object ret)) (oset ret file filename)) (kill-buffer " *tmp eieio read*")) @@ -332,7 +335,8 @@ Second, any text properties will be stripped from strings." ;; We have a predicate, but it doesn't satisfy the predicate? (dolist (PV (cdr proposed-value)) (unless (child-of-class-p (car PV) (car classtype)) - (error "Corrupt object on disk"))) + (error "Invalid object: slot member %s does not match class %s" + (car PV) (car classtype)))) ;; We have a list of objects here. Lets load them ;; in. @@ -349,7 +353,7 @@ Second, any text properties will be stripped from strings." (seq-some (lambda (elt) (child-of-class-p (car proposed-value) elt)) - classtype)) + (if (listp classtype) classtype (list classtype)))) (eieio-persistent-convert-list-to-object proposed-value)) (t @@ -360,19 +364,28 @@ Second, any text properties will be stripped from strings." ((hash-table-p proposed-value) (maphash (lambda (key value) - (when (class-p (car-safe value)) - (setf (gethash key proposed-value) - (eieio-persistent-convert-list-to-object - value)))) + (cond ((class-p (car-safe value)) + (setf (gethash key proposed-value) + (eieio-persistent-convert-list-to-object + value))) + ((and (consp value) + (eq (car value) 'quote)) + (setf (gethash key proposed-value) + (cadr value))))) proposed-value) proposed-value) ((vectorp proposed-value) (dotimes (i (length proposed-value)) - (when (class-p (car-safe (aref proposed-value i))) - (aset proposed-value i - (eieio-persistent-convert-list-to-object - (aref proposed-value i))))) + (let ((val (aref proposed-value i))) + (cond ((class-p (car-safe val)) + (aset proposed-value i + (eieio-persistent-convert-list-to-object + (aref proposed-value i)))) + ((and (consp val) + (eq (car val) 'quote)) + (aset proposed-value i + (cadr val)))))) proposed-value) ((stringp proposed-value) diff --git a/lisp/gnus/gnus-cloud.el b/lisp/gnus/gnus-cloud.el index ac5ff7d47cf..86cd399ff1c 100644 --- a/lisp/gnus/gnus-cloud.el +++ b/lisp/gnus/gnus-cloud.el @@ -48,10 +48,14 @@ "~/.authinfo.gpg" "~/.gnus.el" (:directory "~/News" :match ".*.SCORE\\'")) - "List of file regexps that should be kept up-to-date via the cloud." + "List of files that should be kept up-to-date via the cloud. +Each element may be either a string or a property list. +The latter should have a :directory element whose value is a string, +and a :match element whose value is a regular expression to match +against the basename of files in said directory." :group 'gnus-cloud - ;; FIXME this type does not match the default. Nor does the documentation. - :type '(repeat regexp)) + :type '(repeat (choice (string :tag "File") + (plist :tag "Property list")))) (defcustom gnus-cloud-storage-method (if (featurep 'epg) 'epg 'base64-gzip) "Storage method for cloud data, defaults to EPG if that's available." @@ -290,6 +294,8 @@ Use old data if FORCE-OLDER is not nil." (dolist (elem gnus-cloud-synced-files) (cond ((stringp elem) + ;; This seems fragile. String comparison, with no + ;; expand-file-name to resolve ~, etc. (when (equal elem file-name) (setq matched t))) ((consp elem) diff --git a/lisp/ibuf-ext.el b/lisp/ibuf-ext.el index 91d9acb3a3c..a1adb1df35a 100644 --- a/lisp/ibuf-ext.el +++ b/lisp/ibuf-ext.el @@ -114,7 +114,7 @@ Buffers whose name matches a regexp in this list, are not searched." "A list of major modes ignored by `ibuffer-mark-by-content-regexp'. Buffers whose major mode is in this list, are not searched." :version "26.1" - :type '(repeat regexp) + :type '(repeat (symbol :tag "Major mode")) :require 'ibuf-ext :group 'ibuffer) diff --git a/msdos/sed2v2.inp b/msdos/sed2v2.inp index c57fa4b0416..d6544052d29 100644 --- a/msdos/sed2v2.inp +++ b/msdos/sed2v2.inp @@ -32,6 +32,7 @@ /^#undef DOS_NT *$/s/^.*$/#define DOS_NT/ /^#undef FLOAT_CHECK_DOMAIN *$/s/^.*$/#define FLOAT_CHECK_DOMAIN/ /^#undef HAVE_ALLOCA *$/s/^.*$/#define HAVE_ALLOCA 1/ +/^#undef HAVE_SBRK *$/s/^.*$/#define HAVE_SBRK 1/ /^#undef HAVE_SETITIMER *$/s/^.*$/#define HAVE_SETITIMER 1/ /^#undef HAVE_STRUCT_UTIMBUF *$/s/^.*$/#define HAVE_STRUCT_UTIMBUF 1/ /^#undef LOCALTIME_CACHE *$/s/^.*$/#define LOCALTIME_CACHE 1/ diff --git a/test/lisp/emacs-lisp/eieio-tests/eieio-test-persist.el b/test/lisp/emacs-lisp/eieio-tests/eieio-test-persist.el index b485972078d..f5c25e64912 100644 --- a/test/lisp/emacs-lisp/eieio-tests/eieio-test-persist.el +++ b/test/lisp/emacs-lisp/eieio-tests/eieio-test-persist.el @@ -1,4 +1,4 @@ -;;; eieio-persist.el --- Tests for eieio-persistent class +;;; eieio-test-persist.el --- Tests for eieio-persistent class ;; Copyright (C) 2011-2018 Free Software Foundation, Inc. @@ -40,6 +40,17 @@ This is usually a symbol that starts with `:'." (car tuple) nil))) +(defun hash-equal (hash1 hash2) + "Compare two hash tables to see whether they are equal." + (and (= (hash-table-count hash1) + (hash-table-count hash2)) + (catch 'flag + (maphash (lambda (x y) + (or (equal (gethash x hash2) y) + (throw 'flag nil))) + hash1) + (throw 'flag t)))) + (defun persist-test-save-and-compare (original) "Compare the object ORIGINAL against the one read fromdisk." @@ -49,8 +60,8 @@ This is usually a symbol that starts with `:'." (class (eieio-object-class original)) (fromdisk (eieio-persistent-read file class)) (cv (cl--find-class class)) - (slots (eieio--class-slots cv)) - ) + (slots (eieio--class-slots cv))) + (unless (object-of-class-p fromdisk class) (error "Persistent class %S != original class %S" (eieio-object-class fromdisk) @@ -62,18 +73,24 @@ This is usually a symbol that starts with `:'." (origvalue (eieio-oref original oneslot)) (fromdiskvalue (eieio-oref fromdisk oneslot)) (initarg-p (eieio--attribute-to-initarg - (cl--find-class class) oneslot)) - ) + (cl--find-class class) oneslot))) (if initarg-p - (unless (equal origvalue fromdiskvalue) + (unless + (cond ((and (hash-table-p origvalue) (hash-table-p fromdiskvalue)) + (hash-equal origvalue fromdiskvalue)) + (t (equal origvalue fromdiskvalue))) (error "Slot %S Original Val %S != Persistent Val %S" oneslot origvalue fromdiskvalue)) ;; Else !initarg-p - (unless (equal (cl--slot-descriptor-initform slot) fromdiskvalue) + (let ((origval (cl--slot-descriptor-initform slot)) + (diskval fromdiskvalue)) + (unless + (cond ((and (hash-table-p origval) (hash-table-p diskval)) + (hash-equal origval diskval)) + (t (equal origval diskval))) (error "Slot %S Persistent Val %S != Default Value %S" - oneslot fromdiskvalue (cl--slot-descriptor-initform slot)))) - )))) + oneslot diskval origvalue)))))))) ;;; Simple Case ;; @@ -203,13 +220,16 @@ persistent class.") ((slot1 :initarg :slot1 :type (or persistent-random-class null persist-not-persistent)) (slot2 :initarg :slot2 - :type (or persist-not-persistent persist-random-class null)))) + :type (or persist-not-persistent persistent-random-class null)) + (slot3 :initarg :slot3 + :type persistent-random-class))) (ert-deftest eieio-test-multiple-class-slot () (let ((persist (persistent-multiclass-slot :slot1 (persistent-random-class) :slot2 (persist-not-persistent) + :slot3 (persistent-random-class) :file (concat default-directory "test-ps5.pt")))) (unwind-protect (persist-test-save-and-compare persist) @@ -235,4 +255,85 @@ persistent class.") (persist-test-save-and-compare persist-wols) (delete-file (oref persist-wols file)))) +;;; Tests targeted at popular libraries in the wild. + +;; Objects inside hash tables and vectors (pcache), see bug#29220. +(defclass person () + ((name :type string :initarg :name))) + +(defclass classy (eieio-persistent) + ((teacher + :type person + :initarg :teacher) + (students + :initarg :students :initform (make-hash-table :test 'equal)) + (janitors + :type list + :initarg :janitors) + (random-vector + :type vector + :initarg :random-vector))) + +(ert-deftest eieio-test-persist-hash-and-vector () + (let* ((jane (make-instance 'person :name "Jane")) + (bob (make-instance 'person :name "Bob")) + (hans (make-instance 'person :name "Hans")) + (dierdre (make-instance 'person :name "Dierdre")) + (class (make-instance 'classy + :teacher jane + :janitors (list [tuesday nil] + [friday nil]) + :random-vector [nil] + :file (concat default-directory "classy-" emacs-version ".eieio")))) + (puthash "Bob" bob (slot-value class 'students)) + (aset (slot-value class 'random-vector) 0 + (make-instance 'persistent-random-class)) + (unwind-protect + (persist-test-save-and-compare class) + (delete-file (oref class file))) + (aset (car (slot-value class 'janitors)) 1 hans) + (aset (nth 1 (slot-value class 'janitors)) 1 dierdre) + (unwind-protect + ;; FIXME: This should not error. + (should-error (persist-test-save-and-compare class)) + (delete-file (oref class file))))) + +;; Extra quotation of lists inside other objects (Gnus registry), also +;; bug#29220. + +(defclass eieio-container (eieio-persistent) + ((alist + :initarg :alist + :type list) + (vec + :initarg :vec + :type vector) + (htab + :initarg :htab + :type hash-table))) + +(ert-deftest eieio-test-persist-interior-lists () + (let* ((thing (make-instance + 'eieio-container + :vec [nil] + :htab (make-hash-table :test #'equal) + :file (concat default-directory + "container-" emacs-version ".eieio"))) + (john (make-instance 'person :name "John")) + (alexie (make-instance 'person :name "Alexie")) + (alst '(("first" (one two three)) + ("second" (four five six))))) + (setf (slot-value thing 'alist) alst) + (puthash "alst" alst (slot-value thing 'htab)) + (aset (slot-value thing 'vec) 0 alst) + (unwind-protect + (persist-test-save-and-compare thing) + (delete-file (slot-value thing 'file))) + (setf (nth 2 (cadar alst)) john + (nth 2 (cadadr alst)) alexie) + (unwind-protect + ;; FIXME: Should not error. + (should-error (persist-test-save-and-compare thing)) + (delete-file (slot-value thing 'file))))) + ;;; eieio-test-persist.el ends here |