Use Docbook XML as the source for all man pages

This means we no longer need man2html, which is nice.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=59805
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

9 files changed, 41 insertions, 1342 deletions

diff --git a/configure.ac b/configure.ac
index 1c8b7058..37e33dc5 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1488,13 +1488,8 @@ fi
 AM_CONDITIONAL(DBUS_XML_DOCS_ENABLED, test x$enable_xml_docs = xyes)
 AC_MSG_RESULT($enable_xml_docs)
 
-AC_PATH_PROG([MAN2HTML], [man2html])
-AC_ARG_VAR([MAN2HTML], [Path to man2html (optional)])
-AM_CONDITIONAL(DBUS_HAVE_MAN2HTML, test x$MAN2HTML != x)
-
 AM_CONDITIONAL(DBUS_CAN_UPLOAD_DOCS,
-    test x$enable_doxygen_docs = xyes -a x$enable_xml_docs = xyes -a \
-         x$MAN2HTML != x)
+    [test x$enable_doxygen_docs = xyes && test x$enable_xml_docs = xyes])
 
 #### Have to go $localstatedir->$prefix/var->/usr/local/var
 
@@ -1815,7 +1810,7 @@ tools/Makefile
 test/Makefile
 test/name-test/Makefile
 doc/Makefile
-doc/dbus-daemon.1
+doc/dbus-daemon.1.xml
 dbus-1.pc
 dbus-1-uninstalled.pc
 test/data/valid-config-files/debug-allow-all.conf
@@ -1860,8 +1855,7 @@ echo "
 	32-bit int:		  ${DBUS_INT32_TYPE}
 	16-bit int:		  ${DBUS_INT16_TYPE}
         Doxygen:                  ${DOXYGEN:-not found}
-        xmlto:                    ${XMLTO:-not found}
-        man2html:                 ${MAN2HTML:-not found}"
+        xmlto:                    ${XMLTO:-not found}"
 
 echo "
         Rebuilding generated files: ${USE_MAINTAINER_MODE}
diff --git a/doc/.gitignore b/doc/.gitignore
index 1afe0141..d7c1236c 100644
--- a/doc/.gitignore
+++ b/doc/.gitignore
@@ -2,6 +2,7 @@
 .libs
 Makefile
 Makefile.in
+*.1
 *.1.html
 *.lo
 *.la
@@ -12,7 +13,7 @@ dbus-specification.html
 dbus-test-plan.html
 dbus-tutorial.html
 dbus-faq.html
-dbus-daemon.1
+dbus-daemon.1.xml
 dbus-docs
 dbus-docs.tar.gz
 doxygen.stamp
diff --git a/doc/Makefile.am b/doc/Makefile.am
index 96f7bc38..4906724a 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -1,20 +1,27 @@
 apidir = @htmldir@/api
 
-# automake normally assumes that man pages are generated files;
-# these ones aren't, so we need the dist_ prefix to say that they're
-# their own source code
-dist_man1_MANS = \
+MAN_XML_FILES = \
+	dbus-daemon.1.xml \
+	$(NULL)
+
+DIST_MAN_XML_FILES = \
+	dbus-cleanup-sockets.1.xml \
+	dbus-daemon.1.xml \
+	dbus-launch.1.xml \
+	dbus-monitor.1.xml \
+	dbus-send.1.xml \
+	dbus-uuidgen.1.xml \
+	$(NULL)
+
+if DBUS_XML_DOCS_ENABLED
+man1_MANS = \
 	dbus-cleanup-sockets.1 \
+	dbus-daemon.1 \
 	dbus-launch.1 \
 	dbus-monitor.1 \
 	dbus-send.1 \
 	dbus-uuidgen.1
-
-# on the other hand, this one is generated
-man1_MANS = \
-	dbus-daemon.1
-
-MAN_IN_FILES = dbus-daemon.1.in
+endif
 
 MAN_HTML_FILES = \
 	dbus-cleanup-sockets.1.html \
@@ -32,6 +39,7 @@ dist_doc_DATA = system-activation.txt
 
 # uploaded and distributed, but not installed
 STATIC_DOCS = \
+	$(DIST_MAN_XML_FILES) \
 	dbus-faq.xml \
 	dbus-specification.xml \
 	dbus-test-plan.xml \
@@ -43,8 +51,7 @@ STATIC_DOCS = \
 EXTRA_DIST = \
 	file-boilerplate.c \
 	doxygen_to_devhelp.xsl \
-	$(STATIC_DOCS) \
-	$(MAN_IN_FILES)
+	$(STATIC_DOCS)
 
 html_DATA =
 
@@ -59,26 +66,22 @@ STATIC_HTML = \
 
 dist_html_DATA += $(STATIC_HTML)
 
-XMLTO_OUTPUT=					\
+XMLTO_HTML =					\
 	dbus-faq.html				\
 	dbus-specification.html			\
 	dbus-test-plan.html			\
-	dbus-tutorial.html
+	dbus-tutorial.html			\
+	$(MAN_HTML_FILES)			\
+	$(NULL)
 
 if DBUS_XML_DOCS_ENABLED
-html_DATA += $(XMLTO_OUTPUT)
+html_DATA += $(XMLTO_HTML)
 
-dbus-specification.html: dbus-specification.xml
+%.html: %.xml
 	$(XMLTO) html-nochunks $<
 
-dbus-test-plan.html: dbus-test-plan.xml
-	$(XMLTO) html-nochunks $<
-
-dbus-tutorial.html: dbus-tutorial.xml
-	$(XMLTO) html-nochunks $<
-
-dbus-faq.html: dbus-faq.xml
-	$(XMLTO) html-nochunks $<
+%.1: %.1.xml
+	$(XMLTO) man $<
 endif
 
 if DBUS_DOXYGEN_DOCS_ENABLED
@@ -114,13 +117,6 @@ uninstall-local::
 		rmdir $(DESTDIR)$(apidir)
 endif
 
-if DBUS_HAVE_MAN2HTML
-html_DATA += $(MAN_HTML_FILES)
-
-%.1.html: %.1
-	$(AM_V_GEN)( $(MAN2HTML) < $< > $@.tmp && mv $@.tmp $@ )
-endif
-
 if DBUS_CAN_UPLOAD_DOCS
 BONUS_FILES = \
 	$(top_srcdir)/README \
@@ -130,14 +126,15 @@ BONUS_FILES = \
 	$(top_srcdir)/COPYING \
 	$(top_srcdir)/ChangeLog
 
-dbus-docs: $(STATIC_DOCS) $(dist_doc_DATA) $(dist_html_DATA) $(MAN_HTML_FILES) $(BONUS_FILES) doxygen.stamp $(XMLTO_OUTPUT)
+dbus-docs: $(STATIC_DOCS) $(MAN_XML_FILES) $(dist_doc_DATA) $(dist_html_DATA) $(MAN_HTML_FILES) $(BONUS_FILES) doxygen.stamp $(XMLTO_HTML)
 	$(AM_V_at)rm -rf $@ $@.tmp
 	$(AM_V_GEN)$(MKDIR_P) $@.tmp/api
 	$(AM_V_at)cd $(srcdir) && cp $(STATIC_DOCS) @abs_builddir@/$@.tmp
 	$(AM_V_at)cd $(srcdir) && cp $(dist_doc_DATA) @abs_builddir@/$@.tmp
 	$(AM_V_at)cd $(srcdir) && cp $(STATIC_HTML) @abs_builddir@/$@.tmp
-	$(AM_V_at)cp $(XMLTO_OUTPUT) @abs_builddir@/$@.tmp
+	$(AM_V_at)cp $(XMLTO_HTML) @abs_builddir@/$@.tmp
 	$(AM_V_at)cp $(MAN_HTML_FILES) @abs_builddir@/$@.tmp
+	$(AM_V_at)cp $(MAN_XML_FILES) @abs_builddir@/$@.tmp
 	$(AM_V_at)cp $(BONUS_FILES) @abs_builddir@/$@.tmp
 	$(AM_V_at)cp -r api/html @abs_builddir@/$@.tmp/api
 	$(AM_V_at)mv $@.tmp $@
@@ -164,12 +161,15 @@ maintainer-upload-docs:
 	@false
 endif
 
+CLEANFILES = \
+	$(man1_MANS) \
+	$(MAN_XML_FILES) \
+	$(XMLTO_HTML) \
+	$(NULL)
+
 clean-local:
 	rm -f $(html_DATA)
 	rm -rf api
 	rm -rf dbus-docs dbus-docs.tmp
 	rm -f *.1.html
 	rm -f doxygen.stamp
-
-maintainer-clean-local:
-	rm -f $(XMLTO_OUTPUT)
diff --git a/doc/dbus-cleanup-sockets.1 b/doc/dbus-cleanup-sockets.1
deleted file mode 100644
index a062d498..00000000
--- a/doc/dbus-cleanup-sockets.1
+++ /dev/null
@@ -1,43 +0,0 @@
-.\" 
-.\" dbus\-cleanup\-sockets manual page.
-.\" Copyright (C) 2003 Red Hat, Inc.
-.\"
-.TH dbus\-cleanup\-sockets 1
-.SH NAME
-dbus\-cleanup\-sockets \- clean up leftover sockets in a directory
-.SH SYNOPSIS
-.PP
-.B dbus\-cleanup\-sockets [DIRECTORY]
-
-.SH DESCRIPTION
-
-The \fIdbus\-cleanup\-sockets\fP command cleans up unused D\-Bus
-connection sockets. See http://www.freedesktop.org/software/dbus/ for
-more information about the big picture.
-
-.PP
-If given no arguments, \fIdbus\-cleanup\-sockets\fP cleans up sockets 
-in the standard default socket directory for the
-per\-user\-login\-session message bus; this is usually /tmp. 
-Optionally, you can pass a different directory on the command line.
-
-.PP
-On Linux, this program is essentially useless, because D\-Bus defaults
-to using "abstract sockets" that exist only in memory and don't have a
-corresponding file in /tmp. 
-
-.PP
-On most other flavors of UNIX, it's possible for the socket files to
-leak when programs using D\-Bus exit abnormally or without closing
-their D\-Bus connections. Thus, it might be interesting to run
-dbus\-cleanup\-sockets in a cron job to mop up any leaked sockets.
-Or you can just ignore the leaked sockets, they aren't really hurting
-anything, other than cluttering the output of "ls /tmp"
-
-.SH AUTHOR
-dbus\-cleanup\-sockets was adapted by Havoc Pennington from
-linc\-cleanup\-sockets written by Michael Meeks.
-
-.SH BUGS
-Please send bug reports to the D\-Bus mailing list or bug tracker,
-see http://www.freedesktop.org/software/dbus/
diff --git a/doc/dbus-daemon.1.in b/doc/dbus-daemon.1.in
deleted file mode 100644
index 53856e91..00000000
--- a/doc/dbus-daemon.1.in
+++ /dev/null
@@ -1,766 +0,0 @@
-.\"
-.\" dbus\-daemon manual page.
-.\" Copyright (C) 2003,2008 Red Hat, Inc.
-.\"
-.TH dbus\-daemon 1
-.SH NAME
-dbus\-daemon \- Message bus daemon
-.SH SYNOPSIS
-.PP
-.B dbus\-daemon
-dbus\-daemon [\-\-version] [\-\-session] [\-\-system] [\-\-config\-file=FILE]
-[\-\-print\-address[=DESCRIPTOR]] [\-\-print\-pid[=DESCRIPTOR]] [\-\-fork]
-
-.SH DESCRIPTION
-\fIdbus\-daemon\fP is the D\-Bus message bus daemon. See
-http://www.freedesktop.org/software/dbus/ for more information about
-the big picture. D\-Bus is first a library that provides one\-to\-one
-communication between any two applications; \fIdbus\-daemon\fP is an
-application that uses this library to implement a message bus
-daemon. Multiple programs connect to the message bus daemon and can
-exchange messages with one another.
-.PP
-There are two standard message bus instances: the systemwide message bus
-(installed on many systems as the "messagebus" init service) and the
-per\-user\-login\-session message bus (started each time a user logs in).
-\fIdbus\-daemon\fP is used for both of these instances, but with
-a different configuration file.
-.PP
-The \-\-session option is equivalent to
-"\-\-config\-file=@EXPANDED_SYSCONFDIR@/dbus\-1/session.conf" and the \-\-system
-option is equivalent to
-"\-\-config\-file=@EXPANDED_SYSCONFDIR@/dbus\-1/system.conf". By creating
-additional configuration files and using the \-\-config\-file option,
-additional special\-purpose message bus daemons could be created.
-.PP
-The systemwide daemon is normally launched by an init script,
-standardly called simply "messagebus".
-.PP
-The systemwide daemon is largely used for broadcasting system events,
-such as changes to the printer queue, or adding/removing devices.
-.PP
-The per\-session daemon is used for various interprocess communication
-among desktop applications (however, it is not tied to X or the GUI
-in any way).
-.PP
-SIGHUP will cause the D\-Bus daemon to PARTIALLY reload its
-configuration file and to flush its user/group information caches. Some
-configuration changes would require kicking all apps off the bus; so they will
-only take effect if you restart the daemon. Policy changes should take effect
-with SIGHUP.
-
-.SH OPTIONS
-The following options are supported:
-.TP
-.I "\-\-config\-file=FILE"
-Use the given configuration file.
-.TP
-.I "\-\-fork"
-Force the message bus to fork and become a daemon, even if
-the configuration file does not specify that it should.
-In most contexts the configuration file already gets this
-right, though.
-.I "\-\-nofork"
-Force the message bus not to fork and become a daemon, even if
-the configuration file specifies that it should.
-.TP
-.I "\-\-print\-address[=DESCRIPTOR]"
-Print the address of the message bus to standard output, or
-to the given file descriptor. This is used by programs that
-launch the message bus.
-.TP
-.I "\-\-print\-pid[=DESCRIPTOR]"
-Print the process ID of the message bus to standard output, or
-to the given file descriptor. This is used by programs that
-launch the message bus.
-.TP
-.I "\-\-session"
-Use the standard configuration file for the per\-login\-session message
-bus.
-.TP
-.I "\-\-system"
-Use the standard configuration file for the systemwide message bus.
-.TP
-.I "\-\-version"
-Print the version of the daemon.
-.TP
-.I "\-\-introspect"
-Print the introspection information for all D\-Bus internal interfaces.
-.TP
-.I "\-\-address[=ADDRESS]"
-Set the address to listen on. This option overrides the address
-configured in the configuration file.
-.TP
-.I "\-\-systemd\-activation"
-Enable systemd\-style service activation. Only useful in conjunction
-with the systemd system and session manager on Linux.
-.TP
-.I "\-\-nopidfile"
-Don't write a PID file even if one is configured in the configuration
-files.
-
-.SH CONFIGURATION FILE
-
-A message bus daemon has a configuration file that specializes it
-for a particular application. For example, one configuration
-file might set up the message bus to be a systemwide message bus,
-while another might set it up to be a per\-user\-login\-session bus.
-.PP
-The configuration file also establishes resource limits, security
-parameters, and so forth.
-.PP
-The configuration file is not part of any interoperability
-specification and its backward compatibility is not guaranteed; this
-document is documentation, not specification.
-.PP
-The standard systemwide and per\-session message bus setups are
-configured in the files "@EXPANDED_SYSCONFDIR@/dbus\-1/system.conf" and
-"@EXPANDED_SYSCONFDIR@/dbus\-1/session.conf".  These files normally
-<include> a system\-local.conf or session\-local.conf; you can put local
-overrides in those files to avoid modifying the primary configuration
-files.
-
-.PP
-The configuration file is an XML document. It must have the following
-doctype declaration:
-.nf
-
-   <!DOCTYPE busconfig PUBLIC "\-//freedesktop//DTD D\-Bus Bus Configuration 1.0//EN"
-    "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
-
-.fi
-
-.PP
-The following elements may be present in the configuration file.
-
-.TP
-.I "<busconfig>"
-
-.PP
-Root element.
-
-.TP
-.I "<type>"
-
-.PP
-The well\-known type of the message bus. Currently known values are
-"system" and "session"; if other values are set, they should be
-either added to the D\-Bus specification, or namespaced.  The last
-<type> element "wins" (previous values are ignored). This element
-only controls which message bus specific environment variables are
-set in activated clients.  Most of the policy that distinguishes a
-session bus from the system bus is controlled from the other elements
-in the configuration file.
-
-.PP
-If the well\-known type of the message bus is "session", then the
-DBUS_STARTER_BUS_TYPE environment variable will be set to "session"
-and the DBUS_SESSION_BUS_ADDRESS environment variable will be set
-to the address of the session bus.  Likewise, if the type of the
-message bus is "system", then the DBUS_STARTER_BUS_TYPE environment
-variable will be set to "system" and the DBUS_SESSION_BUS_ADDRESS
-environment variable will be set to the address of the system bus
-(which is normally well known anyway).
-
-.PP
-Example: <type>session</type>
-
-.TP
-.I "<include>"
-
-.PP
-Include a file <include>filename.conf</include> at this point.  If the
-filename is relative, it is located relative to the configuration file
-doing the including.
-
-.PP
-<include> has an optional attribute "ignore_missing=(yes|no)"
-which defaults to "no" if not provided. This attribute
-controls whether it's a fatal error for the included file
-to be absent.
-
-.TP
-.I "<includedir>"
-
-.PP
-Include all files in <includedir>foo.d</includedir> at this
-point. Files in the directory are included in undefined order.
-Only files ending in ".conf" are included.
-
-.PP
-This is intended to allow extension of the system bus by particular
-packages. For example, if CUPS wants to be able to send out
-notification of printer queue changes, it could install a file to
-@EXPANDED_SYSCONFDIR@/dbus\-1/system.d that allowed all apps to receive
-this message and allowed the printer daemon user to send it.
-
-.TP
-.I "<user>"
-
-.PP
-The user account the daemon should run as, as either a username or a
-UID. If the daemon cannot change to this UID on startup, it will exit.
-If this element is not present, the daemon will not change or care
-about its UID.
-
-.PP
-The last <user> entry in the file "wins", the others are ignored.
-
-.PP
-The user is changed after the bus has completed initialization.  So
-sockets etc. will be created before changing user, but no data will be
-read from clients before changing user. This means that sockets
-and PID files can be created in a location that requires root
-privileges for writing.
-
-.TP
-.I "<fork>"
-
-.PP
-If present, the bus daemon becomes a real daemon (forks
-into the background, etc.). This is generally used
-rather than the \-\-fork command line option.
-
-.TP
-.I "<keep_umask>"
-
-.PP
-If present, the bus daemon keeps its original umask when forking.
-This may be useful to avoid affecting the behavior of child processes.
-
-.TP
-.I "<listen>"
-
-.PP
-Add an address that the bus should listen on. The
-address is in the standard D\-Bus format that contains
-a transport name plus possible parameters/options.
-
-.PP
-Example: <listen>unix:path=/tmp/foo</listen>
-
-.PP
-Example: <listen>tcp:host=localhost,port=1234</listen>
-
-.PP
-If there are multiple <listen> elements, then the bus listens
-on multiple addresses. The bus will pass its address to
-started services or other interested parties with
-the last address given in <listen> first. That is,
-apps will try to connect to the last <listen> address first.
-
-.PP
-tcp sockets can accept IPv4 addresses, IPv6 addresses or hostnames.
-If a hostname resolves to multiple addresses, the server will bind
-to all of them. The family=ipv4 or family=ipv6 options can be used
-to force it to bind to a subset of addresses
-
-.PP
-Example: <listen>tcp:host=localhost,port=0,family=ipv4</listen>
-
-.PP
-A special case is using a port number of zero (or omitting the port),
-which means to choose an available port selected by the operating
-system. The port number chosen can be obtained with the
-\-\-print\-address command line parameter and will be present in other
-cases where the server reports its own address, such as when
-DBUS_SESSION_BUS_ADDRESS is set.
-
-.PP
-Example: <listen>tcp:host=localhost,port=0</listen>
-
-.PP
-tcp addresses also allow a bind=hostname option, which will override
-the host option specifying what address to bind to, without changing
-the address reported by the bus. The bind option can also take a
-special name '*' to cause the bus to listen on all local address
-(INADDR_ANY). The specified host should be a valid name of the local
-machine or weird stuff will happen.
-
-.PP
-Example: <listen>tcp:host=localhost,bind=*,port=0</listen>
-
-.TP
-.I "<auth>"
-
-.PP
-Lists permitted authorization mechanisms. If this element doesn't
-exist, then all known mechanisms are allowed.  If there are multiple
-<auth> elements, all the listed mechanisms are allowed.  The order in
-which mechanisms are listed is not meaningful.
-
-.PP
-Example: <auth>EXTERNAL</auth>
-
-.PP
-Example: <auth>DBUS_COOKIE_SHA1</auth>
-
-.TP
-.I "<servicedir>"
-
-.PP
-Adds a directory to scan for .service files. Directories are
-scanned starting with the last to appear in the config file
-(the first .service file found that provides a particular
-service will be used).
-
-.PP
-Service files tell the bus how to automatically start a program.
-They are primarily used with the per\-user\-session bus,
-not the systemwide bus.
-
-.TP
-.I "<standard_session_servicedirs/>"
-
-.PP
-<standard_session_servicedirs/> is equivalent to specifying a series
-of <servicedir/> elements for each of the data directories in the "XDG
-Base Directory Specification" with the subdirectory "dbus\-1/services",
-so for example "/usr/share/dbus\-1/services" would be among the
-directories searched.
-
-.PP
-The "XDG Base Directory Specification" can be found at
-http://freedesktop.org/wiki/Standards/basedir\-spec if it hasn't moved,
-otherwise try your favorite search engine.
-
-.PP
-The <standard_session_servicedirs/> option is only relevant to the
-per\-user\-session bus daemon defined in
-@EXPANDED_SYSCONFDIR@/dbus\-1/session.conf. Putting it in any other
-configuration file would probably be nonsense.
-
-.TP
-.I "<standard_system_servicedirs/>"
-
-.PP
-<standard_system_servicedirs/> specifies the standard system\-wide
-activation directories that should be searched for service files.
-This option defaults to @EXPANDED_DATADIR@/dbus\-1/system\-services.
-
-.PP
-The <standard_system_servicedirs/> option is only relevant to the
-per\-system bus daemon defined in
-@EXPANDED_SYSCONFDIR@/dbus\-1/system.conf. Putting it in any other
-configuration file would probably be nonsense.
-
-.TP
-.I "<servicehelper/>"
-
-.PP
-<servicehelper/> specifies the setuid helper that is used to launch
-system daemons with an alternate user. Typically this should be
-the dbus\-daemon\-launch\-helper executable in located in libexec.
-
-.PP
-The <servicehelper/> option is only relevant to the per\-system bus daemon
-defined in @EXPANDED_SYSCONFDIR@/dbus\-1/system.conf. Putting it in any other
-configuration file would probably be nonsense.
-
-.TP
-.I "<limit>"
-
-.PP
-<limit> establishes a resource limit. For example:
-.nf
-  <limit name="max_message_size">64</limit>
-  <limit name="max_completed_connections">512</limit>
-.fi
-
-.PP
-The name attribute is mandatory.
-Available limit names are:
-.nf
-      "max_incoming_bytes"         : total size in bytes of messages
-                                     incoming from a single connection
-      "max_incoming_unix_fds"      : total number of unix fds of messages
-                                     incoming from a single connection
-      "max_outgoing_bytes"         : total size in bytes of messages
-                                     queued up for a single connection
-      "max_outgoing_unix_fds"      : total number of unix fds of messages
-                                     queued up for a single connection
-      "max_message_size"           : max size of a single message in
-                                     bytes
-      "max_message_unix_fds"       : max unix fds of a single message
-      "service_start_timeout"      : milliseconds (thousandths) until
-                                     a started service has to connect
-      "auth_timeout"               : milliseconds (thousandths) a
-                                     connection is given to
-                                     authenticate
-      "max_completed_connections"  : max number of authenticated connections
-      "max_incomplete_connections" : max number of unauthenticated
-                                     connections
-      "max_connections_per_user"   : max number of completed connections from
-                                     the same user
-      "max_pending_service_starts" : max number of service launches in
-                                     progress at the same time
-      "max_names_per_connection"   : max number of names a single
-                                     connection can own
-      "max_match_rules_per_connection": max number of match rules for a single
-                                        connection
-      "max_replies_per_connection" : max number of pending method
-                                     replies per connection
-                                     (number of calls\-in\-progress)
-      "reply_timeout"              : milliseconds (thousandths)
-                                     until a method call times out
-.fi
-
-.PP
-The max incoming/outgoing queue sizes allow a new message to be queued
-if one byte remains below the max. So you can in fact exceed the max
-by max_message_size.
-
-.PP
-max_completed_connections divided by max_connections_per_user is the
-number of users that can work together to denial\-of\-service all other users by using
-up all connections on the systemwide bus.
-
-.PP
-Limits are normally only of interest on the systemwide bus, not the user session
-buses.
-
-.TP
-.I "<policy>"
-
-.PP
-The <policy> element defines a security policy to be applied to a particular
-set of connections to the bus. A policy is made up of
-<allow> and <deny> elements. Policies are normally used with the systemwide bus;
-they are analogous to a firewall in that they allow expected traffic
-and prevent unexpected traffic.
-
-.PP
-Currently, the system bus has a default\-deny policy for sending method calls
-and owning bus names.  Everything else, in particular reply messages, receive
-checks, and signals has a default allow policy.
-
-.PP
-In general, it is best to keep system services as small, targeted programs which
-run in their own process and provide a single bus name.  Then, all that is needed
-is an <allow> rule for the "own" permission to let the process claim the bus
-name, and a "send_destination" rule to allow traffic from some or all uids to
-your service.
-
-.PP
-The <policy> element has one of four attributes:
-.nf
-  context="(default|mandatory)"
-  at_console="(true|false)"
-  user="username or userid"
-  group="group name or gid"
-.fi
-
-.PP
-Policies are applied to a connection as follows:
-.nf
-   \- all context="default" policies are applied
-   \- all group="connection's user's group" policies are applied
-     in undefined order
-   \- all user="connection's auth user" policies are applied
-     in undefined order
-   \- all at_console="true" policies are applied
-   \- all at_console="false" policies are applied
-   \- all context="mandatory" policies are applied
-.fi
-
-.PP
-Policies applied later will override those applied earlier,
-when the policies overlap. Multiple policies with the same
-user/group/context are applied in the order they appear
-in the config file.
-
-.TP
-.I "<deny>"
-.I "<allow>"
-
-.PP
-A <deny> element appears below a <policy> element and prohibits some
-action. The <allow> element makes an exception to previous <deny>
-statements, and works just like <deny> but with the inverse meaning.
-
-.PP
-The possible attributes of these elements are:
-.nf
-   send_interface="interface_name"
-   send_member="method_or_signal_name"
-   send_error="error_name"
-   send_destination="name"
-   send_type="method_call" | "method_return" | "signal" | "error"
-   send_path="/path/name"
-
-   receive_interface="interface_name"
-   receive_member="method_or_signal_name"
-   receive_error="error_name"
-   receive_sender="name"
-   receive_type="method_call" | "method_return" | "signal" | "error"
-   receive_path="/path/name"
-
-   send_requested_reply="true" | "false"
-   receive_requested_reply="true" | "false"
-
-   eavesdrop="true" | "false"
-
-   own="name"
-   own_prefix="name"
-   user="username"
-   group="groupname"
-.fi
-
-.PP
-Examples:
-.nf
-   <deny send_destination="org.freedesktop.Service" send_interface="org.freedesktop.System" send_member="Reboot"/>
-   <deny send_destination="org.freedesktop.System"/>
-   <deny receive_sender="org.freedesktop.System"/>
-   <deny user="john"/>
-   <deny group="enemies"/>
-.fi
-
-.PP
-The <deny> element's attributes determine whether the deny "matches" a
-particular action. If it matches, the action is denied (unless later
-rules in the config file allow it).
-.PP
-send_destination and receive_sender rules mean that messages may not be
-sent to or received from the *owner* of the given name, not that
-they may not be sent *to that name*. That is, if a connection
-owns services A, B, C, and sending to A is denied, sending to B or C
-will not work either.
-.PP
-The other send_* and receive_* attributes are purely textual/by\-value
-matches against the given field in the message header.
-.PP
-"Eavesdropping" occurs when an application receives a message that
-was explicitly addressed to a name the application does not own, or
-is a reply to such a message. Eavesdropping thus only applies to
-messages that are addressed to services and replies to such messages
-(i.e. it does not apply to signals).
-.PP
-For <allow>, eavesdrop="true" indicates that the rule matches even
-when eavesdropping. eavesdrop="false" is the default and means that
-the rule only allows messages to go to their specified recipient.
-For <deny>, eavesdrop="true" indicates that the rule matches
-only when eavesdropping. eavesdrop="false" is the default for <deny>
-also, but here it means that the rule applies always, even when
-not eavesdropping. The eavesdrop attribute can only be combined with
-send and receive rules (with send_* and receive_* attributes).
-.PP
-The [send|receive]_requested_reply attribute works similarly to the eavesdrop
-attribute. It controls whether the <deny> or <allow> matches a reply
-that is expected (corresponds to a previous method call message).
-This attribute only makes sense for reply messages (errors and method
-returns), and is ignored for other message types.
-
-.PP
-For <allow>, [send|receive]_requested_reply="true" is the default and indicates that
-only requested replies are allowed by the
-rule. [send|receive]_requested_reply="false" means that the rule allows any reply
-even if unexpected.
-
-.PP
-For <deny>, [send|receive]_requested_reply="false" is the default but indicates that
-the rule matches only when the reply was not
-requested. [send|receive]_requested_reply="true" indicates that the rule applies
-always, regardless of pending reply state.
-
-.PP
-user and group denials mean that the given user or group may
-not connect to the message bus.
-
-.PP
-For "name", "username", "groupname", etc.
-the character "*" can be substituted, meaning "any." Complex globs
-like "foo.bar.*" aren't allowed for now because they'd be work to
-implement and maybe encourage sloppy security anyway.
-
-.PP
-<allow own_prefix="a.b"/> allows you to own the name "a.b" or any
-name whose first dot-separated elements are "a.b": in particular,
-you can own "a.b.c" or "a.b.c.d", but not "a.bc" or "a.c".
-This is useful when services like Telepathy and ReserveDevice
-define a meaning for subtrees of well-known names, such as
-org.freedesktop.Telepathy.ConnectionManager.(anything)
-and org.freedesktop.ReserveDevice1.(anything).
-
-.PP
-It does not make sense to deny a user or group inside a <policy>
-for a user or group; user/group denials can only be inside
-context="default" or context="mandatory" policies.
-
-.PP
-A single <deny> rule may specify combinations of attributes such as
-send_destination and send_interface and send_type. In this case, the
-denial applies only if both attributes match the message being denied.
-e.g. <deny send_interface="foo.bar" send_destination="foo.blah"/> would
-deny messages with the given interface AND the given bus name.
-To get an OR effect you specify multiple <deny> rules.
-
-.PP
-You can't include both send_ and receive_ attributes on the same
-rule, since "whether the message can be sent" and "whether it can be
-received" are evaluated separately.
-
-.PP
-Be careful with send_interface/receive_interface, because the
-interface field in messages is optional.  In particular, do NOT
-specify <deny send_interface="org.foo.Bar"/>!  This will cause
-no\-interface messages to be blocked for all services, which is
-almost certainly not what you intended.  Always use rules of
-the form: <deny send_interface="org.foo.Bar" send_destination="org.foo.Service"/>
-
-.TP
-.I "<selinux>"
-
-.PP
-The <selinux> element contains settings related to Security Enhanced Linux.
-More details below.
-
-.TP
-.I "<associate>"
-
-.PP
-An <associate> element appears below an <selinux> element and
-creates a mapping. Right now only one kind of association is possible:
-.nf
-   <associate own="org.freedesktop.Foobar" context="foo_t"/>
-.fi
-
-.PP
-This means that if a connection asks to own the name
-"org.freedesktop.Foobar" then the source context will be the context
-of the connection and the target context will be "foo_t" \- see the
-short discussion of SELinux below.
-
-.PP
-Note, the context here is the target context when requesting a name,
-NOT the context of the connection owning the name.
-
-.PP
-There's currently no way to set a default for owning any name, if
-we add this syntax it will look like:
-.nf
-   <associate own="*" context="foo_t"/>
-.fi
-If you find a reason this is useful, let the developers know.
-Right now the default will be the security context of the bus itself.
-
-.PP
-If two <associate> elements specify the same name, the element
-appearing later in the configuration file will be used.
-
-.SH SELinux
-
-.PP
-See http://www.nsa.gov/selinux/ for full details on SELinux. Some useful excerpts:
-
-.IP "" 8
-Every subject (process) and object (e.g. file, socket, IPC object,
-etc) in the system is assigned a collection of security attributes,
-known as a security context. A security context contains all of the
-security attributes associated with a particular subject or object
-that are relevant to the security policy.
-
-.IP "" 8
-In order to better encapsulate security contexts and to provide
-greater efficiency, the policy enforcement code of SELinux typically
-handles security identifiers (SIDs) rather than security contexts. A
-SID is an integer that is mapped by the security server to a security
-context at runtime.
-
-.IP "" 8
-When a security decision is required, the policy enforcement code
-passes a pair of SIDs (typically the SID of a subject and the SID of
-an object, but sometimes a pair of subject SIDs or a pair of object
-SIDs), and an object security class to the security server. The object
-security class indicates the kind of object, e.g. a process, a regular
-file, a directory, a TCP socket, etc.
-
-.IP "" 8
-Access decisions specify whether or not a permission is granted for a
-given pair of SIDs and class. Each object class has a set of
-associated permissions defined to control operations on objects with
-that class.
-
-.PP
-D\-Bus performs SELinux security checks in two places.
-
-.PP
-First, any time a message is routed from one connection to another
-connection, the bus daemon will check permissions with the security context of
-the first connection as source, security context of the second connection
-as target, object class "dbus" and requested permission "send_msg".
-
-.PP
-If a security context is not available for a connection
-(impossible when using UNIX domain sockets), then the target
-context used is the context of the bus daemon itself.
-There is currently no way to change this default, because we're
-assuming that only UNIX domain sockets will be used to
-connect to the systemwide bus. If this changes, we'll
-probably add a way to set the default connection context.
-
-.PP
-Second, any time a connection asks to own a name,
-the bus daemon will check permissions with the security
-context of the connection as source, the security context specified
-for the name in the config file as target, object
-class "dbus" and requested permission "acquire_svc".
-
-.PP
-The security context for a bus name is specified with the
-<associate> element described earlier in this document.
-If a name has no security context associated in the
-configuration file, the security context of the bus daemon
-itself will be used.
-
-.SH DEBUGGING
-
-.PP
-If you're trying to figure out where your messages are going or why
-you aren't getting messages, there are several things you can try.
-.PP
-Remember that the system bus is heavily locked down and if you
-haven't installed a security policy file to allow your message
-through, it won't work. For the session bus, this is not a concern.
-.PP
-The simplest way to figure out what's happening on the bus is to run
-the \fIdbus\-monitor\fP program, which comes with the D\-Bus
-package. You can also send test messages with \fIdbus\-send\fP. These
-programs have their own man pages.
-.PP
-If you want to know what the daemon itself is doing, you might consider
-running a separate copy of the daemon to test against. This will allow you
-to put the daemon under a debugger, or run it with verbose output, without
-messing up your real session and system daemons.
-.PP
-To run a separate test copy of the daemon, for example you might open a terminal
-and type:
-.nf
-  DBUS_VERBOSE=1 dbus\-daemon \-\-session \-\-print\-address
-.fi
-.PP
-The test daemon address will be printed when the daemon starts. You will need
-to copy\-and\-paste this address and use it as the value of the
-DBUS_SESSION_BUS_ADDRESS environment variable when you launch the applications
-you want to test. This will cause those applications to connect to your
-test bus instead of the DBUS_SESSION_BUS_ADDRESS of your real session bus.
-.PP
-DBUS_VERBOSE=1 will have NO EFFECT unless your copy of D\-Bus
-was compiled with verbose mode enabled. This is not recommended in
-production builds due to performance impact. You may need to rebuild
-D\-Bus if your copy was not built with debugging in mind. (DBUS_VERBOSE
-also affects the D\-Bus library and thus applications using D\-Bus; it may
-be useful to see verbose output on both the client side and from the daemon.)
-.PP
-If you want to get fancy, you can create a custom bus
-configuration for your test bus (see the session.conf and system.conf
-files that define the two default configurations for example). This
-would allow you to specify a different directory for .service files,
-for example.
-
-.SH AUTHOR
-See http://www.freedesktop.org/software/dbus/doc/AUTHORS
-
-.SH BUGS
-Please send bug reports to the D\-Bus mailing list or bug tracker,
-see http://www.freedesktop.org/software/dbus/
diff --git a/doc/dbus-launch.1 b/doc/dbus-launch.1
deleted file mode 100644
index e22a3be0..00000000
--- a/doc/dbus-launch.1
+++ /dev/null
@@ -1,211 +0,0 @@
-.\" 
-.\" dbus\-launch manual page.
-.\" Copyright (C) 2003 Red Hat, Inc.
-.\"
-.TH dbus\-launch 1
-.SH NAME
-dbus\-launch \- Utility to start a message bus from a shell script
-.SH SYNOPSIS
-.PP
-.B dbus\-launch [\-\-version] [\-\-sh\-syntax] [\-\-csh\-syntax] [\-\-auto\-syntax] [\-\-exit\-with\-session] [\-\-autolaunch=MACHINEID] [\-\-config\-file=FILENAME] [PROGRAM] [ARGS...]
-
-.SH DESCRIPTION
-
-The \fIdbus\-launch\fP command is used to start a session bus 
-instance of \fIdbus\-daemon\fP from a shell script.
-It would normally be called from a user's login
-scripts. Unlike the daemon itself, \fIdbus\-launch\fP exits, so
-backticks or the $() construct can be used to read information from
-\fIdbus\-launch\fP.
-
-With no arguments, \fIdbus\-launch\fP will launch a session bus
-instance and print the address and PID of that instance to standard
-output.
-
-You may specify a program to be run; in this case, \fIdbus\-launch\fP
-will launch a session bus instance, set the appropriate environment
-variables so the specified program can find the bus, and then execute the
-specified program, with the specified arguments.  See below for
-examples.
-
-If you launch a program, \fIdbus\-launch\fP will not print the
-information about the new bus to standard output.
-
-When \fIdbus\-launch\fP prints bus information to standard output, by
-default it is in a simple key\-value pairs format. However, you may 
-request several alternate syntaxes using the \-\-sh\-syntax, \-\-csh\-syntax,
-\-\-binary\-syntax, or
-\-\-auto\-syntax options. Several of these cause \fIdbus\-launch\fP to emit shell code
-to set up the environment.
-
-With the \-\-auto\-syntax option, \fIdbus\-launch\fP looks at the value
-of the SHELL environment variable to determine which shell syntax
-should be used.  If SHELL ends in "csh", then csh\-compatible code is
-emitted; otherwise Bourne shell code is emitted.  Instead of passing
-\-\-auto\-syntax, you may explicitly specify a particular one by using
-\-\-sh\-syntax for Bourne syntax, or \-\-csh\-syntax for csh syntax.
-In scripts, it's more robust to avoid \-\-auto\-syntax and you hopefully
-know which shell your script is written in.
-
-.PP
-See http://www.freedesktop.org/software/dbus/ for more information
-about D\-Bus. See also the man page for \fIdbus\-daemon\fP.
-
-.SH EXAMPLES
-
-Distributions running
-.B dbus\-launch
-as part of a standard X session should run
-.B "dbus\-launch \-\-exit\-with\-session"
-after the X server has started and become available, as a wrapper around
-the "main" X client (typically a session manager or window manager), as in
-these examples:
-
-.RS
-.B "dbus\-launch \-\-exit\-with\-session gnome\-session"
-
-.B "dbus\-launch \-\-exit\-with\-session openbox"
-
-.B "dbus\-launch \-\-exit\-with\-session ~/.xsession"
-.RE
-
-If your distribution does not do this, you can achieve similar results
-by running your session or window manager in the same way in a script
-run by your X session, such as
-.BR ~/.xsession ,
-.B ~/.xinitrc
-or
-.BR ~/.Xclients .
-
-To start a D-Bus session within a text-mode session, you can run
-dbus-launch in the background. For instance, in a sh-compatible shell:
-
-.nf
-  ## test for an existing bus daemon, just to be safe
-  if test \-z "$DBUS_SESSION_BUS_ADDRESS" ; then
-      ## if not found, launch a new one
-      eval `dbus\-launch \-\-sh\-syntax`
-      echo "D\-Bus per\-session daemon address is: $DBUS_SESSION_BUS_ADDRESS"
-  fi
-.fi
-Note that in this case, dbus-launch will exit, and dbus-daemon will not be
-terminated automatically on logout.
-
-.SH AUTOMATIC LAUNCHING
-
-.PP
-If DBUS_SESSION_BUS_ADDRESS is not set for a process that tries to use
-D\-Bus, by default the process will attempt to invoke dbus\-launch with
-the \-\-autolaunch option to start up a new session bus or find the 
-existing bus address on the X display or in a file in
-~/.dbus/session\-bus/
-
-.PP
-Whenever an autolaunch occurs, the application that had to
-start a new bus will be in its own little world; it can effectively
-end up starting a whole new session if it tries to use a lot of 
-bus services. This can be suboptimal or even totally broken, depending
-on the app and what it tries to do.
-
-.PP
-There are two common reasons for autolaunch. One is ssh to a remote
-machine. The ideal fix for that would be forwarding of
-DBUS_SESSION_BUS_ADDRESS in the same way that DISPLAY is forwarded.
-In the meantime, you can edit the session.conf config file to 
-have your session bus listen on TCP, and manually set
-DBUS_SESSION_BUS_ADDRESS, if you like.
-
-.PP
-The second common reason for autolaunch is an su to another user, and
-display of X applications running as the second user on the display
-belonging to the first user. Perhaps the ideal fix in this case
-would be to allow the second user to connect to the session bus of the
-first user, just as they can connect to the first user's display.
-However, a mechanism for that has not been coded.
-
-.PP
-You can always avoid autolaunch by manually setting
-DBUS_SESSION_BUS_ADDRESS. Autolaunch happens because the default
-address if none is set is "autolaunch:", so if any other address is
-set there will be no autolaunch. You can however include autolaunch in
-an explicit session bus address as a fallback, for example
-DBUS_SESSION_BUS_ADDRESS="something:,autolaunch:" \- in that case if
-the first address doesn't work, processes will autolaunch. (The bus
-address variable contains a comma\-separated list of addresses to try.)
-
-.PP
-The \-\-autolaunch option is considered an internal implementation
-detail of libdbus, and in fact there are plans to change it. There's
-no real reason to use it outside of the libdbus implementation anyhow.
-
-.SH OPTIONS
-The following options are supported:
-.TP
-.I "\-\-auto\-syntax"
-Choose \-\-csh\-syntax or \-\-sh\-syntax based on the SHELL environment variable.
-
-.I "\-\-binary\-syntax"
-Write to stdout a nul\-terminated bus address, then the bus PID as a
-binary integer of size sizeof(pid_t), then the bus X window ID as a
-binary integer of size sizeof(long). Integers are in the machine's
-byte order, not network byte order or any other canonical byte order.
-
-.TP
-.I "\-\-close\-stderr"
-Close the standard error output stream before starting the D\-Bus
-daemon. This is useful if you want to capture dbus\-launch error
-messages but you don't want dbus\-daemon to keep the stream open to
-your application.
-
-.TP
-.I "\-\-config\-file=FILENAME"
-Pass \-\-config\-file=FILENAME to the bus daemon, instead of passing it 
-the \-\-session argument. See the man page for dbus\-daemon
-
-.TP
-.I "\-\-csh\-syntax"
-Emit csh compatible code to set up environment variables.
-
-.TP
-.I "\-\-exit\-with\-session"
-If this option is provided, a persistent "babysitter" process will be 
-created that watches stdin for HUP and tries to connect to the X
-server. If this process gets a HUP on stdin or loses its X connection,
-it kills the message bus daemon.
-
-.TP
-.I "\-\-autolaunch=MACHINEID"
-This option implies that \fIdbus\-launch\fP should scan for a
-previously\-started session and reuse the values found there. If no
-session is found, it will start a new session. The
-\-\-exit\-with\-session option is implied if \-\-autolaunch is given.
-This option is for the exclusive use of libdbus, you do not want to
-use it manually. It may change in the future.
-
-.TP
-.I "\-\-sh\-syntax"
-Emit Bourne\-shell compatible code to set up environment variables.
-
-.TP
-.I "\-\-version"
-Print the version of dbus\-launch
-
-.SH NOTES
-
-If you run
-.B "dbus\-launch myapp"
-(with any other options), dbus\-daemon will
-.I not
-exit when
-.B myapp
-terminates: this is because
-.B myapp
-is assumed to be part of a larger session, rather than a session in its
-own right.
-
-.SH AUTHOR
-See http://www.freedesktop.org/software/dbus/doc/AUTHORS
-
-.SH BUGS
-Please send bug reports to the D\-Bus mailing list or bug tracker,
-see http://www.freedesktop.org/software/dbus/
diff --git a/doc/dbus-monitor.1 b/doc/dbus-monitor.1
deleted file mode 100644
index 6282b9eb..00000000
--- a/doc/dbus-monitor.1
+++ /dev/null
@@ -1,78 +0,0 @@
-.\" 
-.\" dbus\-monitor manual page.
-.\" Copyright (C) 2003 Red Hat, Inc.
-.\"
-.TH dbus\-monitor 1
-.SH NAME
-dbus\-monitor \- debug probe to print message bus messages
-.SH SYNOPSIS
-.PP
-.B dbus\-monitor
-[\-\-system | \-\-session | \-\-address ADDRESS] [\-\-profile | \-\-monitor]
-[watch expressions]
-
-.SH DESCRIPTION
-
-The \fIdbus\-monitor\fP command is used to monitor messages going
-through a D\-Bus message bus.  See
-http://www.freedesktop.org/software/dbus/ for more information about
-the big picture.
-
-.PP
-There are two well\-known message buses: the systemwide message bus
-(installed on many systems as the "messagebus" service) and the
-per\-user\-login\-session message bus (started each time a user logs in).
-The \-\-system and \-\-session options direct \fIdbus\-monitor\fP to
-monitor the system or session buses respectively.  If neither is
-specified, \fIdbus\-monitor\fP monitors the session bus.
-
-.PP
-\fIdbus\-monitor\fP has two different output modes, the 'classic'\-style
-monitoring mode and profiling mode. The profiling format is a compact
-format with a single line per message and microsecond\-resolution timing
-information. The \-\-profile and \-\-monitor options select the profiling
-and monitoring output format respectively. If neither is specified,
-\fIdbus\-monitor\fP uses the monitoring output format.
-
-.PP
-In order to get \fIdbus\-monitor\fP to see the messages you are interested
-in, you should specify a set of watch expressions as you would expect to
-be passed to the \fIdbus_bus_add_match\fP function.
-
-.PP 
-The message bus configuration may keep \fIdbus\-monitor\fP from seeing
-all messages, especially if you run the monitor as a non\-root user.
-
-.SH OPTIONS
-.TP
-.I "\-\-system"
-Monitor the system message bus.
-.TP
-.I "\-\-session"
-Monitor the session message bus.  (This is the default.)
-.TP
-.I "\-\-address ADDRESS"
-Monitor an arbitrary message bus given at ADDRESS.
-.TP
-.I "\-\-profile"
-Use the profiling output format.
-.TP
-.I "\-\-monitor"
-Use the monitoring output format.  (This is the default.)
-
-.SH EXAMPLE
-Here is an example of using dbus\-monitor to watch for the gnome typing
-monitor to say things
-.nf
-
-  dbus\-monitor "type='signal',sender='org.gnome.TypingMonitor',interface='org.gnome.TypingMonitor'"
-
-.fi
-
-.SH AUTHOR
-dbus\-monitor was written by Philip Blundell.
-The profiling output mode was added by Olli Salli.
-
-.SH BUGS
-Please send bug reports to the D\-Bus mailing list or bug tracker,
-see http://www.freedesktop.org/software/dbus/
diff --git a/doc/dbus-send.1 b/doc/dbus-send.1
deleted file mode 100644
index 131a60df..00000000
--- a/doc/dbus-send.1
+++ /dev/null
@@ -1,109 +0,0 @@
-.\" 
-.\" dbus\-send manual page.
-.\" Copyright (C) 2003 Red Hat, Inc.
-.\"
-.TH dbus\-send 1
-.SH NAME
-dbus\-send \- Send a message to a message bus
-.SH SYNOPSIS
-.PP
-.B dbus\-send
-[\fB\-\-system\fP | \fB\-\-session\fP]
-[\fB\-\-dest=\fINAME\fP]
-[\fB\-\-print\-reply\fP[\fB=literal\fP]]
-[\fB\-\-reply\-timeout=\fIMSEC\fP]
-[\fB\-\-type=\fITYPE\fP]
-\fIOBJECT_PATH\fP \fIINTERFACE\fB.\fIMEMBER\fP [\fICONTENTS\fP ...]
-
-.SH DESCRIPTION
-
-The \fIdbus\-send\fP command is used to send a message to a D\-Bus message
-bus. See http://www.freedesktop.org/software/dbus/ for more 
-information about the big picture.
-
-.PP
-There are two well\-known message buses: the systemwide message bus 
-(installed on many systems as the "messagebus" service) and the 
-per\-user\-login\-session message bus (started each time a user logs in).
-The \fB\-\-system\fP and \fB\-\-session\fP options direct
-\fBdbus\-send\fP to send messages to the system or session buses respectively.
-If neither is specified, \fBdbus\-send\fP sends to the session bus.
-
-.PP 
-Nearly all uses of \fBdbus\-send\fP must provide the \fB\-\-dest\fP argument
-which is the name of a connection on the bus to send the message to. If
-\fB\-\-dest\fP is omitted, no destination is set.
-
-.PP
-The object path and the name of the message to send must always be
-specified. Following arguments, if any, are the message contents
-(message arguments).  These are given as type\-specified values and 
-may include containers (arrays, dicts, and variants) as described below.
-
-.nf
-<contents>   ::= <item> | <container> [ <item> | <container>...]
-<item>       ::= <type>:<value>
-<container>  ::= <array> | <dict> | <variant>
-<array>      ::= array:<type>:<value>[,<value>...] 
-<dict>       ::= dict:<type>:<type>:<key>,<value>[,<key>,<value>...]
-<variant>    ::= variant:<type>:<value>
-<type>       ::= string | int16 | uint 16 | int32 | uint32 | int64 | uint64 | double | byte | boolean | objpath
-.fi
-
-D\-Bus supports more types than these, but \fBdbus\-send\fP currently
-does not.  Also, \fBdbus\-send\fP does not permit empty containers
-or nested containers (e.g. arrays of variants).
-
-.PP
-Here is an example invocation:
-.nf
-
-  dbus\-send \-\-dest=org.freedesktop.ExampleName               \\
-            /org/freedesktop/sample/object/name              \\
-            org.freedesktop.ExampleInterface.ExampleMethod   \\
-            int32:47 string:'hello world' double:65.32       \\
-            array:string:"1st item","next item","last item"  \\
-            dict:string:int32:"one",1,"two",2,"three",3      \\
-            variant:int32:\-8                                 \\
-            objpath:/org/freedesktop/sample/object/name 
-
-.fi
-
-Note that the interface is separated from a method or signal 
-name by a dot, though in the actual protocol the interface
-and the interface member are separate fields.
-
-.SH OPTIONS
-The following options are supported:
-.TP
-.BI \-\-dest= NAME
-Specify the name of the connection to receive the message.
-.TP
-.B "\-\-print\-reply"
-Block for a reply to the message sent, and print any reply received
-in a human-readable form.
-.TP
-.B "\-\-print\-reply=literal"
-Block for a reply to the message sent, and print the body of the
-reply. If the reply is an object path or a string, it is printed
-literally, with no punctuation, escape characters etc.
-.TP
-.BI \-\-reply\-timeout= MSEC
-Wait for a reply for up to \fIMSEC\fP milliseconds.
-The default is implementation\(hydefined, typically 25 seconds.
-.TP
-.B "\-\-system"
-Send to the system message bus.
-.TP
-.B "\-\-session"
-Send to the session message bus.  (This is the default.)
-.TP
-.BI \-\-type= TYPE
-Specify \fBmethod_call\fP or \fBsignal\fP (defaults to "\fBsignal\fP").
-
-.SH AUTHOR
-dbus\-send was written by Philip Blundell.
-
-.SH BUGS
-Please send bug reports to the D\-Bus mailing list or bug tracker,
-see http://www.freedesktop.org/software/dbus/
diff --git a/doc/dbus-uuidgen.1 b/doc/dbus-uuidgen.1
deleted file mode 100644
index 8ed8dd20..00000000
--- a/doc/dbus-uuidgen.1
+++ /dev/null
@@ -1,89 +0,0 @@
-.\" 
-.\" dbus\-uuidgen manual page.
-.\" Copyright (C) 2006 Red Hat, Inc.
-.\"
-.TH dbus\-uuidgen 1
-.SH NAME
-dbus\-uuidgen \- Utility to generate UUIDs
-.SH SYNOPSIS
-.PP
-.B dbus\-uuidgen [\-\-version] [\-\-ensure[=FILENAME]] [\-\-get[=FILENAME]]
-
-.SH DESCRIPTION
-
-The \fIdbus\-uuidgen\fP command generates or reads a universally unique ID.
-
-.PP
-Note that the D\-Bus UUID has no relationship to RFC 4122 and does not generate
-UUIDs compatible with that spec. Many systems have a separate command
-for that (often called "uuidgen").
-
-.PP
-See http://www.freedesktop.org/software/dbus/ for more information
-about D\-Bus.
-
-.PP
-The primary usage of \fIdbus\-uuidgen\fP is to run in the post\-install
-script of a D\-Bus package like this:
-.nf
-  dbus\-uuidgen \-\-ensure
-.fi
-
-.PP
-This will ensure that /var/lib/dbus/machine\-id exists and has the uuid in it.
-It won't overwrite an existing uuid, since this id should remain fixed
-for a single machine until the next reboot at least.
-
-.PP
-The important properties of the machine UUID are that 1) it remains
-unchanged until the next reboot and 2) it is different for any two 
-running instances of the OS kernel. That is, if two processes see the 
-same UUID, they should also see the same shared memory, UNIX domain
-sockets, local X displays, localhost.localdomain resolution, process
-IDs, and so forth.
-
-.PP
-If you run \fIdbus\-uuidgen\fP with no options it just prints a new uuid made
-up out of thin air.
-
-.PP
-If you run it with \-\-get, it prints the machine UUID by default, or
-the UUID in the specified file if you specify a file.
-
-.PP
-If you try to change an existing machine\-id on a running system, it will
-probably result in bad things happening. Don't try to change this file. Also,
-don't make it the same on two different systems; it needs to be different
-anytime there are two different kernels running.
-
-.PP
-The UUID should be different on two different virtual machines,
-because there are two different kernels.
-
-.SH OPTIONS
-The following options are supported:
-.TP
-.I "\-\-get[=FILENAME]"
-If a filename is not given, defaults to localstatedir/lib/dbus/machine\-id
-(localstatedir is usually /var). If this file exists and is valid, the
-uuid in the file is printed on stdout. Otherwise, the command exits 
-with a nonzero status.
-
-.TP
-.I "\-\-ensure[=FILENAME]"
-If a filename is not given, defaults to localstatedir/lib/dbus/machine\-id
-(localstatedir is usually /var). If this file exists then it will be
-validated, and a failure code returned if it contains the wrong thing.
-If the file does not exist, it will be created with a new uuid in it.
-On success, prints no output.
-
-.TP
-.I "\-\-version"
-Print the version of dbus\-uuidgen
-
-.SH AUTHOR
-See http://www.freedesktop.org/software/dbus/doc/AUTHORS
-
-.SH BUGS
-Please send bug reports to the D\-Bus mailing list or bug tracker,
-see http://www.freedesktop.org/software/dbus/