diff options
Diffstat (limited to 'packages')
| -rw-r--r-- | packages/vms/clean_gnv_curl.com | 220 | ||||
| -rw-r--r-- | packages/vms/curl_gnv_build_steps.txt | 210 | ||||
| -rw-r--r-- | packages/vms/gnv_curl_configure.sh | 46 | ||||
| -rw-r--r-- | packages/vms/make_gnv_curl_install.sh | 45 | ||||
| -rw-r--r-- | packages/vms/setup_gnv_curl_build.com | 300 |
5 files changed, 821 insertions, 0 deletions
diff --git a/packages/vms/clean_gnv_curl.com b/packages/vms/clean_gnv_curl.com new file mode 100644 index 000000000..25af784cc --- /dev/null +++ b/packages/vms/clean_gnv_curl.com @@ -0,0 +1,220 @@ +$! File: clean_gnv_curl.COM +$! +$! $Id$ +$! +$! The GNV environment leaves behind some during the configure and build +$! procedure that need to be cleaned up. +$! +$! The default is to remove all the left over stuff from running the +$! configure script and to remove all intermediate binary files. +$! +$! This should be run with no parameters after the gnv_curl_configure.sh +$! script is run. +$! +$! Paramter P1: REALCLEAN +$! This removes all build products and brings the environment back to +$! the point where the gnv_curl_configure.sh procedure needs to be run again. +$! +$! Copyright 2009, John Malmberg +$! +$! Permission to use, copy, modify, and/or distribute this software for any +$! purpose with or without fee is hereby granted, provided that the above +$! copyright notice and this permission notice appear in all copies. +$! +$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT +$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +$! +$! +$! 07-Jul-2009 J. Malmberg +$!============================================================================ +$! +$! Save this so we can get back. +$ default_dir = f$environment("default") +$! +$! +$! Move to where the base directory is. +$ set def [--] +$! +$! +$ file = "sys$login:sh*." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "sys$login:make*." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]confdefs.h" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]conftest.dsf" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]conftest.lis" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]conftest.sym" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$! +$ file = "lcl_root:[.conf*...]*.*" +$ if f$search(file) .nes. "" then delete 'file';* +$ file = "lcl_root:[]conf*.dir +$ if f$search(file) .nes. "" then delete 'file';* +$! +$! +$ file = "lcl_root:[.lib]*.out" +$ if f$search(file) .nes. "" then delete 'file';* +$ file = "lcl_root:[.lib]*.o" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$! +$ file = "lcl_root:[.lib]*.lis" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.src]*.lis" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.src]cc_temp*." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.src]*.dsf" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.src]*.o" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.lib]ar*." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.lib]cc_temp*." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]*.lo" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]*.a" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]*.la" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]*.lai" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.include.curl]curlbuild.h_old" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.packages.vms]curl-*.release_notes" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.packages.vms]*-curl-*.pcsi$desc" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.packages.vms]*-curl-*.pcsi$text" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$!====================================================================== +$! +$ if p1 .nes. "REALCLEAN" then goto all_exit +$! +$ file = "lcl_root:[...]*.obj" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]Makefile." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]libtool." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]*.lis" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]POTFILES." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]libcurl.pc" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]curl-config." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]config.h" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.include.curl]curlbuild.h" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.src]config.h" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.src]curl." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.tests]configurehelp.pm" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.lib]config.h" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.lib]curl_config.h" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.lib]libcurl.vers" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]ca-bundle.h" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]config.log" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]config.status" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]conftest.dangle" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]CXX$DEMANGLER_DB." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[]stamp-h1." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]stamp-h1." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]stamp-h2." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]stamp-h3." +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.lib]*.a" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]*.spec" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]gnv$*.*" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[...]gnv*.opt" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.packages.EPM]curl.list" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.packages.vms]macro32_exactcase.exe" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$all_exit: +$! +$! Put the default back. +$!----------------------- +$ set def 'default_dir' +$! +$ exit diff --git a/packages/vms/curl_gnv_build_steps.txt b/packages/vms/curl_gnv_build_steps.txt new file mode 100644 index 000000000..6be139b10 --- /dev/null +++ b/packages/vms/curl_gnv_build_steps.txt @@ -0,0 +1,210 @@ +From File: curl_gnv_build_steps.txt + +$Id$ + + Copyright 2009, John Malmberg + + Permission to use, copy, modify, and/or distribute this software for any + purpose with or without fee is hereby granted, provided that the above + copyright notice and this permission notice appear in all copies. + + THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT + OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + +Currently building Curl using GNV takes longer than building Curl via DCL. +The GNV procedure actually uses the same configure and makefiles that +Unix builds use. + +Building CURL on OpenVMS using GNV requires GNV V2.1-2 or the updated +images that are available via anonymous FTP at encompasserve.org in the gnv +directory. It also requires the GNV Bash 4.2.45 kit as an update from the +same location. + +The HP C 7.x compiler was used for building the GNV version. + +The source kits are provided in backup savesets inside of the PCSI install kit. + +Backup save sets are currently the only distribution medium that I can be +sure is installed on a target VMS system that will correctly unpack files +with extended character sets in them. You may need to adjust the ownership +of the restored files, since /Interchange/noconvert was not available at the +time that this document was written. + +[gnv.common_src]curl_*_original_src.bck is the original source of the curl kit +as provided by the curl project. [gnv.vms_src]curl-*_vms_src.bck, if present, +has the OpenVMS specific files that are used for building that are not yet in +the curl source kits for that release distributed http://curl.haxx.se + +These backup savesets should be restored to different directory trees on +an ODS-5 volume(s) which are referenced by concealed rooted logical names. + +SRC_ROOT: is for the source files common to all platforms. +VMS_ROOT: is for the source files that are specific to OpenVMS. + Note, you should create the VMS_ROOT: directory tree even if it is + initially empty. This is where you should put edits if you are + making changes. +LCL_ROOT: is manually created to have the same base and sub-directories as + SRC_ROOT: and VMS_ROOT: + +The logical name REF_ROOT: is defined to be a logical name that is a search +list for VMS_ROOT:,SRC_ROOT: + +The logical name PRJ_ROOT: is defined to be a logical name that is a search +list for LCL_ROOT:,REF_ROOT: + +For the make install process to work, it must have write access to the +directories referenced by the GNU: logical name. +In future releases of GNV, and with GNV Bash 4.2.45 installed, this name +should be GNV$GNU: + +As directly updating those directories would probably be disruptive to other +users of the system and require elevated privilege, this can be handled by +creating a separate directory tree to install into which can be referenced +by the concealed rooted logical name new_gnu:. A concealed logical name of +OLD_GNU: can be set up to reference the real GNV directory tree. + +Then a local copy of the GNU/GNV$GNU logical names can be set up as a search +list such as NEW_GNU:,OLD_GNU: + +The directory NEW_GNU:[usr] should be created. The make install phase will +create all the other directories. + +These files do not create the directories in the VMS_ROOT and LCL_ROOT +directory trees. You can create them with commands similar to: + + $ create/dir lcl_root:[curl]/prot=w:re + $ copy src_root:[curl...]*.dir - + lcl_root:[curl...]/prot=(o:rwed,w:re) + $ create/dir vms_root:[curl]/prot=w:re + $ copy src_root:[curl...]*.dir - + vms_root:[curl...]/prot=(o:rwed,w:re) + +One of the ways with to protect the source from being modified is to have +the directories under src_root: owned by a user or resource where the build +username only has read access to it. + + +Note to builders: + +GNV currently has a bug where configure scripts take a long time to run. +Some of the configure steps take a while to complete, and on a 600 Mhz +DS10 with IDE disks, taking an hour to run the CURL configure is normal. +The bug appears to be in the SED for GNV 2.1.3 and GNV 3.0.1 where it +is taking far longer than it should to do I/O. In addition, there are +reports that the SED in GNV 3.0.1 is broken so the SED from GNV 2.1.3 +should be used instead. + +The following messages can be ignored and may get fixed in a future version +of GNV. The GNV$*.OPT files are used to find the libraries as many have +different names on VMS than on Unix. The Bash environment variable +GNV_CC_QUALIFIERS can override all other settings for the C Compiler. + +? cc: No support for switch -warnprotos +? cc: Unrecognized file toomanyargs +? cc: Warning: library "ssl" not found +? cc: Warning: library "crypto" not found +? cc: Warning: library "gssapi" not found +? cc: Warning: library "z" not found +u unimplemented switch - ignored + + +With these search lists set up and the properly, curl can be built by +setting your default to PRJ_ROOT:[curl.packages.vms] where the * is +replaced by the actual version of curl, and then issuing the command: + + $ @build_gnv_curl.com. + +This command procedure does the following: + + $ @setup_gnv_curl_build.com + + $ bash gnv_curl_configure.sh + + $ @clean_gnv_curl.com + + $ bash make_gnv_curl_install.sh + + $ @gnv_link_curl.com + + $ purge new_gnu:[*...]/log + + +To clean up after a build to start over, the following commands are used: + + $ bash + bash$ export GNV_DISABLE_DCL_FALLBACK=1 + bash$ cd ../.. + bash$ make clean + bash$ exit + +Then run the @clean_gnv_curl.com. Use the parameter "realclean" if you are +going to run the setup_gnv_curl_build.com and configure script again. + + $ @clean_gnv_curl.com realclean + +If new public symbols have been added, adjust the file gnv_libcurl_symbols.opt +to have the new symbols. If the symbols are longer than 32 characters, +then they will need to have the original be exact case CRC shortened and +an alias in upper case with CRC shortened, in addition to having an exact +case truncated alias and an uppercase truncated alias. + +The *.EXE files are not moved to the new_gnu: directory. + +After you are satisfied with the results of your build, you can move the +files from new_gnu: to old_gnu: at your convenience. + +Building a PCSI kit for an archictecture takes the following steps after +making sure that you have a working build environment. + + 1. Make sure that you have a staging directory that can be referenced + by the path STAGE_ROOT:[KIT] + + 2. Edit the file curl_release_note_start.txt or other text files to + reflect any changes. + + 3. Define the logical name GNV_PCSI_PRODUCER to indicate who is making + the distribution. For making updates to an existing open source + kit you may need to keep the producer the same. + + 4. Define the logical name GNV_PCSI_PRODUCER_FULL_NAME to be your full + name or full name of your company. + + 5. If you are producing an update kit, then define the logical name + GNV_PCSI_PATCHLEVEL to the letter E followed by a number. Do not + use a patch level for kits built from the daily CVS snapshot. + + 6. Edit the file PCSI_GNV_CURL_FILE_LIST.TXT if there are new files added + to the kit. These files should all be ODS-2 legal filenames and + directories. + + A limitation of the PCSI kitting procedure is that when selecting files, + it tends to ignore the directory structure and assumes that all files + with the same name are the same file, so every file placed in the kit + must have a unique name. Then a procedure needs to be added to the kit + to create an alias link on install and remove the link on remove. + + Since at this time curl does not need this alias procedure, the steps + to automatically build it are not included here. + + While newer versions of PCSI can support ODS-5 filenames, not all verions + of PCSI on systems that have ODS-5 filenames do. So as a post install + step, the PCSI kit built by these steps does a rename to the correct + case as a post install step. + + 7. Build the PCSI kit with @pcsi_product_gnv_curl.com + + The following message is normal: + %PCSI-I-CANNOTVAL, cannot validate + EAGLE$DQA0:[stage_root.][kit]JEM-AXPVMS-CURL-D0719-6-1.PCSI;1 + -PCSI-I-NOTSIGNED, product kit is not signed and therefore has + no manifest file + + This will result in both compressed and uncompressed kits for the target + platform. + +Good Luck. diff --git a/packages/vms/gnv_curl_configure.sh b/packages/vms/gnv_curl_configure.sh new file mode 100644 index 000000000..f71421080 --- /dev/null +++ b/packages/vms/gnv_curl_configure.sh @@ -0,0 +1,46 @@ +# File: gnv_curl_configure.sh +# +# $Id$ +# +# Set up and run the configure script for Curl so that it can find the +# proper options for VMS. +# +# Copyright 2009, John Malmberg +# +# Permission to use, copy, modify, and/or distribute this software for any +# purpose with or without fee is hereby granted, provided that the above +# copyright notice and this permission notice appear in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT +# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +# +# 06-Jun-2009 J. Malmberg +# 28-Dec-2012 J. Malmberg Update for Bash 4.2.39 +#========================================================================== +# +# POSIX exit mode is needed for UNIX shells. +export GNV_CC_MAIN_POSIX_EXIT=1 +# +# Where to look for the helper files. +export GNV_OPT_DIR=. +# +# How to find the SSL library files. +export LIB_OPENSSL=/SSL_LIB +# +# Override configure adding -std1 which is too strict for what curl +# actually wants. +export GNV_CC_QUALIFIERS=/STANDARD=RELAXED +# +# Set the directory to where the Configure script actually is. +cd ../.. +# +# +./configure --prefix=/usr --exec-prefix=/usr --disable-dependency-tracking \ + --disable-libtool-lock --with-gssapi --disable-ntlm-wb \ + --with-ca-path=gnv\$curl_ca_path +# diff --git a/packages/vms/make_gnv_curl_install.sh b/packages/vms/make_gnv_curl_install.sh new file mode 100644 index 000000000..d2150e625 --- /dev/null +++ b/packages/vms/make_gnv_curl_install.sh @@ -0,0 +1,45 @@ +# File: make_gnv_curl_install.sh +# +# $Id$ +# +# Set up and run the make script for Curl. +# +# This makes the library, the curl binary and attempts an install. +# A search list should be set up for GNU (GNV$GNU). +# +# Copyright 2009, John Malmberg +# +# Permission to use, copy, modify, and/or distribute this software for any +# purpose with or without fee is hereby granted, provided that the above +# copyright notice and this permission notice appear in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT +# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +# +# 06-Jun-2009 J. Malmberg +#========================================================================== +# +# +# Needed VMS build setups for GNV. +export GNV_OPT_DIR=. +export GNV_CC_QUALIFIERS=/DEBUG/OPTIMIZE/STANDARD=RELAXED\ +/float=ieee_float/ieee_mode=denorm_results +export GNV_CXX_QUALIFIERS=/DEBUG/OPTIMIZE/float=ieee/ieee_mode=denorm_results +export GNV_CC_NO_INC_PRIMARY=1 +# +# +# POSIX exit mode is needed for UNIX shells. +export GNV_CC_MAIN_POSIX_EXIT=1 +make +cd ../.. +# adjust the libcurl.pc file, GNV currently ignores the Lib: line. +# but is noisy about it, so we just remove it. +sed -e 's/^Libs:/#Libs:/g' libcurl.pc > libcurl.pc_new +rm libcurl.pc +mv libcurl.pc_new libcurl.pc +make install diff --git a/packages/vms/setup_gnv_curl_build.com b/packages/vms/setup_gnv_curl_build.com new file mode 100644 index 000000000..d6a80ac2f --- /dev/null +++ b/packages/vms/setup_gnv_curl_build.com @@ -0,0 +1,300 @@ +$! File: setup_gnv_curl_build.com +$! +$! $Id$ +$! +$! Set up build environment for building Curl under GNV on VMS. +$! +$! GNV needs some files moved into the other directories to help with +$! the configure script and the build. +$! +$! Copyright 2009, John Malmberg +$! +$! Permission to use, copy, modify, and/or distribute this software for any +$! purpose with or without fee is hereby granted, provided that the above +$! copyright notice and this permission notice appear in all copies. +$! +$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT +$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +$! +$! 30-May-2009 J. Malmberg +$! +$!======================================================================= +$! +$! Save this so we can get back. +$ default_dir = f$environment("default") +$! +$! Move to where the Configure script is. +$ set def [--] +$! +$! Get the path to where the Configure script is. +$ base_dir = f$environment("default") +$! +$! Allow arguments to be grouped together with comma or separated by spaces +$! Do no know if we will need more than 8. +$ args = "," + p1 + "," + p2 + "," + p3 + "," + p4 + "," +$ args = args + p5 + "," + p6 + "," + p7 + "," + p8 + "," +$! +$! Provide lower case version to simplify parsing. +$ args_lower = f$edit(args, "LOWERCASE,COLLAPSE") +$! +$ args_len = f$length(args) +$ args_lower_len = f$length(args_lower) +$! +$ tests = 0 +$ if f$locate(",test", args_lower) .lt. args_lower_len +$ then +$ tests = 1 +$ endif +$! +$ examples = 0 +$ if f$locate(",exam", args_lower) .lt. args_lower_len +$ then +$ examples = 1 +$ endif +$! +$! We want detailed build logs. +$ clist = "/list/show=(expan,includ)" +$! +$! We want full symbol names in exact case. Need a commmon +$! repository for all directories. +$ cnames = "/names=(shortened,as_is)/repository=''base_dir'" +$! +$! Set the compiler options for GNV CC wrapper to inherit. +$ cc :== cc'clist''cnames'/nested_include_directory=none +$ cxx :== cxx'clist''cnames'/nested_include_directory=none +$ pointer_size = "32" +$! Note 64 bit pointers requires all libraries to either have +$! 64 bit pointers or have #pragma directives. +$! Currently building curl on VMS with 64 bit pointers does not work. +$! +$! A logical name to make it easier to find some of the hacks. +$ define/job gnv_hacks 'base_dir' +$! +$! A logical name to find the [.packages.vms] directory where we started. +$ define/job gnv_packages_vms 'default_dir' +$! +$! Kerberos headers: +$ if f$trnlnm("gssapi") .eqs. "" +$ then +$ if f$search("sys$sysroot:[kerberos]include.dir") .nes. "" +$ then +$ define/job gssapi sys$sysroot:[kerberos.include] +$ endif +$ endif +$! +$! OpenSSL headers +$ if f$trnlnm("openssl") .eqs. "" +$ then +$ if f$trnlnm("ssl$include") .nes. "" +$ then +$ define/job openssl ssl$include: +$ endif +$ endif +$! +$! C compiler include path. +$ define/job decc$system_include prj_root:[.include.curl],- + [-.packages.vms],- + ssl$include:,gnv$gnu:[usr.include],- + gnv$gnu:[usr.include.libz],gnv$gnu:[include],- + gnv$zlib_include:,- + sys$sysroot:[kerberos.include] +$! +$! Set up a include list for the compiler to find all the header files +$! that they need. +$! +$ define/job decc$user_include src_root:[.include.curl] +$ define ssl_lib sys$library: +$! +$! Calculate what is needed in the option files +$ libzshr_line = "" +$ try_shr = "gnv$libzshr''pointer_size'" +$ if f$search(try_shr) .nes. "" then libzshr_line = "''try_shr'/share" +$ if (libzshr_line .eqs. "") +$ then +$ try_shr = "sys$share:" + try_shr +$ if f$search("''try_shr'.exe") .nes. "" +$ then +$ libzshr_line = "''try_shr'/share" +$ endif +$ endif +$! +$! Kerberos +$ gssrtlshr_line = "" +$ try_shr = "sys$share:gss$rtl" +$ if f$search("''try_shr'.exe") .nes. "" +$ then +$ gssrtlshr_line = "''try_shr'/share" +$ endif +$! +$! HP OpenSSL +$ libcryptoshr_line = "" +$ try_shr = "sys$share:ssl$libcrypto_shr''pointer_size'" +$ if f$search("''try_shr'.exe") .nes. "" +$ then +$ libcryptoshr_line = "''try_shr'/share" +$ endif +$! +$ libsslshr_line = "" +$ try_shr = "sys$share:ssl$libssl_shr''pointer_size'" +$ if f$search("''try_shr'.exe") .nes. "" +$ then +$ libsslshr_line = "''try_shr'/share" +$ endif +$! +$! +$! Copy over the gnv$conftest* files to base directory. +$!----------------------------------------------------- +$ copy 'default_dir'gnv_conftest.c_first 'base_dir'gnv$conftest.c_first +$ create 'base_dir'gnv$conftest.opt +$ open/append opt 'base_dir'gnv$conftest.opt +$ if libzshr_line .nes. "" then write opt libzshr_line +$ if libcryptoshr_line .nes. "" then write opt libcryptoshr_line +$ if libsslshr_line .nes. "" then write opt libsslshr_line +$ close opt +$ purge 'base_dir'gnv$conftest.* +$ rename 'base_dir'gnv$conftest.* ;1 +$! +$! +$! +$! GNV helper files for building the test curl binary. +$!----------------------------------------------- +$ create [.src]gnv$curl.opt +$ open/append opt [.src]gnv$curl.opt +$ write opt "gnv_packages_vms:curlmsg.obj" +$ if libzshr_line .nes. "" then write opt libzshr_line +$ if gssrtlshr_line .nes. "" then write opt gssrtlshr_line +$ if libcryptoshr_line .nes. "" then write opt libcryptoshr_line +$ if libsslshr_line .nes. "" then write opt libsslshr_line +$ close opt +$ purge [.src]gnv$*.* +$ rename [.src]gnv$*.* ;1 +$! +$! +$! Create the libcurl +$!------------------------------------------------------ +$ create 'default_dir'gnv_libcurl_linker.opt +$ open/append opt 'default_dir'gnv_libcurl_linker.opt +$ if libzshr_line .nes. "" then write opt libzshr_line +$ if gssrtlshr_line .nes. "" then write opt gssrtlshr_line +$ if libcryptoshr_line .nes. "" then write opt libcryptoshr_line +$ if libsslshr_line .nes. "" then write opt libsslshr_line +$ close opt +$! +$! +$! Create the template linker file +$!--------------------------------- +$ create 'default_dir'gnv_template_linker.opt +$ open/append opt 'default_dir'gnv_template_linker.opt +$ write opt "gnv_vms_common:vms_curl_init_unix.obj" +$ if libzshr_line .nes. "" then write opt libzshr_line +$ if gssrtlshr_line .nes. "" then write opt gssrtlshr_line +$ if libcryptoshr_line .nes. "" then write opt libcryptoshr_line +$ if libsslshr_line .nes. "" then write opt libsslshr_line +$ close opt +$! +$! Copy over the gnv$*.opt files for [.docs.examples] +$!---------------------------------------------------- +$ if examples .ne. 0 +$ then +$ example_apps = "10-at-a-time,anyauthput,certinfo,cookie_interface,debug" +$ example_apps = example_apps + ",fileupload,fopen,ftpget,ftpgetresp" +$ example_apps = example_apps + ",ftpupload,getinfo,getinmemory" +$ example_apps = example_apps + ",http-post,httpcustomheader,httpput" +$ example_apps = example_apps + ",https,multi-app,multi-debugcallback" +$ example_apps = example_apps + ",multi-double,multi-post,multi-single" +$ example_apps = example_apps + ",persistant,post-callback,postit2" +$ example_apps = example_apps + ",sendrecv,sepheaders,simple,simplepost" +$ example_apps = example_apps + ",simplessl" +$! +$ i = 0 +$example_loop: +$ ap_name = f$element(i, ",", example_apps) +$ if ap_name .eqs. "," then goto example_loop_end +$ if ap_name .eqs. "" then goto example_loop_end +$ copy 'default_dir'gnv_template_linker.opt - + [.docs.examples]gnv$'ap_name'.opt +$ i = i + 1 +$ goto example_loop +$example_loop_end: +$! +$! clean up the copy. +$ purge [.docs.examples]gnv$*.opt +$ rename [.docs.examples]gnv$*.opt ;1 +$ endif +$! +$! +$ if tests .ne. 0 +$ then +$ libtest_apps = "lib500,lib501,lib502,lib503,lib504,lib505,lib506,lib507" +$ libtest_apps = libtest_apps + ",lib508,lib510,lib511,lib512,lib513,lib514" +$ libtest_apps = libtest_apps + ",lib515,lib516,lib517,lib518,lib519,lib520" +$ libtest_apps = libtest_apps + ",lib521,lib523,lib524,lib525,lib526,lib527" +$ libtest_apps = libtest_apps + ",lib529,lib530,lib532,lib533,lib536,lib537" +$ libtest_apps = libtest_apps + ",lib539,lib540,lib541,lib542,lib543,lib544" +$ libtest_apps = libtest_apps + ",lib545,lib547,lib548,lib549,lib552,lib553" +$ libtest_apps = libtest_apps + ",lib554,lib555,lib556,lib557,lib558,lib559" +$ libtest_apps = libtest_apps + ",lib560,lib562,lib564" +$ i = 0 +$libtest_loop: +$ ap_name = f$element(i, ",", libtest_apps) +$ if ap_name .eqs. "," then goto libtest_loop_end +$ if ap_name .eqs. "" then goto libtest_loop_end +$ copy 'default_dir'gnv_template_linker.opt - + [.tests.libtest]gnv$'ap_name'.opt +$ i = i + 1 +$ goto libtest_loop +$libtest_loop_end: +$! +$! clean up the copy. +$ purge [.tests.libtest]gnv$*.opt +$ rename [.tests.libtest]gnv$*.opt ;1 +$ endif +$! +$! +$! Build the Message file. +$!-------------------------- +$ if f$search("[.packages.vms]curlmsg.obj") .eqs. "" +$ then +$ message [.packages.vms]curlmsg.msg/object=[.packages.vms] +$ endif +$ if f$search("gnv$curlmsg.exe") .eqs. "" +$ then +$ link/share=gnv$curlmsg.exe [.packages.vms]curlmsg.obj +$ endif +$! +$! +$! +$! Need to build the GNV common init module. +$!------------------------------------------- +$ if f$search("[vms_common]vms_crtl_init_unix.obj") .nes. "" +$ then +$! Common copy, which should be more up to date than the one in the kit. +$!------------------------------------------------------------------------ +$ define/job gnv_vms_common [vms_common] +$ write sys$output "Using common vms_crtl_init_unix.obj" +$ else +$! For some reason the common files are missing so use the local copies +$!------------------------------------------------------------------------ +$ define/job gnv_vms_common 'default_dir' +$ init_obj = "gnv_vms_common:vms_crtl_init_unix.obj" +$ if f$search(init_obj) .eqs. "" +$ then +$ cc'cflags' 'default_dir'vms_crtl_init.c- + /define=GNV_UNIX_TOOL=1/obj='init_obj' +$ purge 'init_obj' +$ rename 'init_obj' ;1 +$ endif +$ endif +$! +$all_exit: +$! +$ set def 'default_dir' +$! +$! Verify can break things in bash, especially in Configure scripts. +$ set nover +$ exit |