| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A legacy checksum in CMOS is not maintained by coreboot and may be invalid. If
the Linux kernel driver sees that the checksum is wrong, it will return EIO
when read from or written to. That makes crossystem return an error since it
can't read the CMOS, and it also prevents it from changing some settings.
One way to fix the problem would be to remove the checksum check in the kernel
driver. This would change the semantics of the driver so that either x86 was
inconsistent with the other architectures, or change the semantics of those
other architectures as well.
Another option would be to fix the checksum during manufacturing since nothing
should be changing those particular bytes of CMOS. The problem with this
approach is that something might corrupt the CMOS after manufacturing, and
we'd have the same problem again.
Yet another solution would be to make the firmware, most likely coreboot,
actually keep the checksum up to date. This seems like an awful waste of boot
time, the bytes protected by the checksum aren't actually used by anything,
and the bytes of the CMOS that are used are protected by vboot using its own
checksum.
The solution implemented here is to make crossystem recognize when the driver
has determined that the checksum is invalid and make it call an ioctl that
gets the driver to fix the checksum. Wrapper functions for fread, fwrite,
fgetc, and fputc are implemented which first attempt to read or write, on
failure check for the EIO error code, and if they find it to call the
appropriate ioctl and attempt the access again. This way, we won't take any
extra time to talk to the CMOS when everything is working properly, and when
there's a problem it gets fixed up transparently. One problem with this
approach is that using the /dev/nvram device file will still fail until
crossystem is run at least once and given a chance to fix the checksum.
BUG=chrome-os-partner:6718
TEST=For version 1, verified that crossystem reported an error on Sameer's
Lumpy. Used strace to verify that crossystem received an EIO error when trying
to read or write /dev/nvram. Built a new image with this change and booted it
using a USB stick. Ran crossystem and verified that crossystem no longer
reported an error. Rebooted into the original image and verified that
crossystem worked there as well, indicating that the persistent problem in the
CMOS had been corrected.
For version 2, the same as version 1 except that I used a custom version of
u-boot to purposefully corrupt the CMOS rather than using Sameer's Lumpy.
Change-Id: I929535bd2a7d666e41a707b6b24c3f0b0df1147f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/11373
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/11556
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We should have been using Droid Sans, not Helvetica, and some of the
non-Roman locales need special handling to render clearly and correctly. We
also get better results if we avoid scaling after rendering the text.
Added scripts/newbitmaps/Makefile to regenerate it all, updated the READMEs.
Since Hung-Te figured out how to use pango-view to render the UTF-8
reliably, we don't need to keep all the pre-rendered locale images anymore
either.
This provides the x86 bmpblock for Stumpy PVT. We may need some more
tweaking for Lumpy and/or ARM.
BUG=chrome-os-partner:6595
TEST=manual
Put the new screens into the bios:
gbb_utility -s --flags=0 -b bmpblock_x86.bin OLDBIOS NEWBIOS
flashrom -w NEWBIOS
Then reboot and look at the BIOS screens. The lettering is much clearer.
Change-Id: Icb07bc6d131920730f41348c7de9151e42cc9518
Reviewed-on: https://gerrit.chromium.org/gerrit/11007
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
u-boot got too big on ARM, so don't unroll the loops there.
BUG=none
TEST=none
Change-Id: I426621e147bef7cff1285b0ce063123fbeea751b
Reviewed-on: https://gerrit.chromium.org/gerrit/11078
Reviewed-by: Vince Laviano <vlaviano@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jon Kliegman <kliegs@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- loop unrolling has a positive effect on execution speed.
- This change also drops the -march=i386 and thus allows
the compiler to use SSE instructions.
- A few duplicate options are dropped from CFLAGS.
- drop -fno-toplevel-reordering. This sneaked in from
u-boot where it might be needed by some drivers.
With this change I just successfully booted my Stumpy in 833ms
BUG=chrome-os-partner:4675
TEST=boot tested on stumpy
Change-Id: I805cbcaec48b4f8d1d8fa7d7bed9241178f59a8e
Reviewed-on: https://gerrit.chromium.org/gerrit/11061
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All memory operations (except the "safe ones") live in the firmware
so the fast operations can be used. Except Memset. This CL changes that
problem.
This CL needs https://gerrit.chromium.org/gerrit/#change,10992 and a
similar change in H2C.
BUG=chrome-os-partner:6313
TEST=run coreboot/u-boot on Stumpy
Change-Id: Ic961ebbb45470c8fc1316490b902759dcf221deb
Reviewed-on: https://gerrit.chromium.org/gerrit/10993
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=test booting on stumpy
Change-Id: Ie89704d62714d1e78603d83ce86167ce9c682cb0
Reviewed-on: https://gerrit.chromium.org/gerrit/11055
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chrome-os-partner:6595
TEST=manual
User our new officially finally final localizations for Stumpy.
Start by removing some of the subtle speckles from the background images so
they'll compress a little better, then modify the Makefile to autogenerate
the bitmap blob (for x86, anyway).
Note: the size improvment isn't much, but every little bit helps. With all
43 locales, bmpblock.bin was 659798 bytes. Now it's 665142 (5344 bytes saved).
And, no, we can't fit all 43 locales in our current BIOS. Yet.
Change-Id: I78cf8215f3da41a7ebc0e354cd1964c427a8c651
Reviewed-on: https://gerrit.chromium.org/gerrit/10879
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:21742
TEST=manual, ensure vboot scripts continue to work
like make_dev_ssd.sh on the client
Change-Id: I405334bab734f35a1a81e4b9e90e93cb760cc3d2
Reviewed-on: https://gerrit.chromium.org/gerrit/10479
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:21863
TEST=ensure_not_ASAN.sh image.bin
Change-Id: I414f941a787e0023257401bb8ed7b4a5257f026a
Reviewed-on: http://gerrit.chromium.org/gerrit/10352
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Tested-by: Jim Hebert <jimhebert@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The -isystem and the rest of the CFLAGS for firmware builds is copied
from U-Boot, where U-Boot generates it on the fly, as a temporary
solution before we figure out how make the CFLAGS right.
Given that, the hard-coded -isystem is both incorrect (since tool chain
is upgraded to a new version) and unnecessary. It is unnecessary
because firmware lib is carefully written that the lib does not (and
probably should not) depend on any system header.
Even if in the future a system header is added to the firmware lib,
because firmware build sets -nostdinc to CFLAGS, the compiler will
safely report missing header instead of silently using the standard
system header.
So this commit removes the -isystem.
BUG=chromium-os:16808
TEST=Make sure non-firmware build still works by running
`emerge-{tegra2_seaboard,x86-alex} vboot_reference`
TEST=Run firmware build successfully
`emerge-{tegra2_seaboard,x86-alex} vboot_reference-firmware`
TEST=Add #include<stdarg.h> to any header in firmware/include/ and run
firmware build again and observe build fail on missing stdarg.h
Change-Id: I8291390f21a975446993640d7a92a3eed4750e32
Reviewed-on: http://gerrit.chromium.org/gerrit/10072
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Mike Frysinger <vapier@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The rest of the chromiumos build system uses amd64 as the
architecture name for 64bit x86. This adds support for this
name to vbutil.
BUG=chromium-os:21284
TEST=vbutil --arch amd64 should not return unknown architecture
Change-Id: I37531591a7a31486f6447ae611d54569d1ea59d5
Reviewed-on: http://gerrit.chromium.org/gerrit/9959
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=none
Change-Id: I86743dbba3210858d817c8e6982f17df96920420
Reviewed-on: http://gerrit.chromium.org/gerrit/9889
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=none
Change-Id: I4b8cffa63dd10261e45a5ca6233b4d5cd2471f62
Reviewed-on: http://gerrit.chromium.org/gerrit/9861
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the unlikely case that params is not set or the LoadKernelParams
structure is not initialized correctly, LoadKernel will exit before
initializing shcall. However, in LoadKernelExit it will be used to
stire the function's return code, thus potentially dereferencing a
NULL pointer.
BUG=chrome-os-partner:6307
TEST=compile tested.
Change-Id: I691c6b5054d8f77296de86834b3125de06e0e398
Reviewed-on: http://gerrit.chromium.org/gerrit/9791
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Updated the text strings using the latest results from the localization
experts.
* Strip the leading byte-order-mark and trailing whitespace from the text
files, since it's not used for anything and sometimes renders as a box.
* Added options to the text_to_bmp script to handle right-to-left languages
and to override the font.
* Added scripts/newbitmaps/strings/localized_text/Makefile to regenerate all
the bitmaps from the text strings. This handles right-to-left languages
correctly.
* Modified make_default_yaml so that the th/model.txt string is moved up a
bit to align it properly with the HWID.
* Regenerated DEFAULT.yaml using the new bitmaps.
BUG=chromium-os:13037
TEST=none
Change-Id: I095830a46ba831742d437867a9caac88c8e28de1
Reviewed-on: http://gerrit.chromium.org/gerrit/8834
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=manual
cd src/platform/vboot_reference
make && make runtests
Change-Id: I7f7d50d7c9c5541e0b99031245f882996a6b88ec
Reviewed-on: http://gerrit.chromium.org/gerrit/8731
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=manual
cd src/platform/vboot_reference
make && make runtests
Change-Id: I56feceb7d4fce80e4f50d5d7875eafef325363cc
Reviewed-on: http://gerrit.chromium.org/gerrit/8659
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=manual
cd src/platform/vboot_reference
make && make runtests
Change-Id: I2c4084afa883f7e4cdc758ff1560eec900c75c17
Reviewed-on: http://gerrit.chromium.org/gerrit/8585
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This displays the gbb.flags value when being warned about it being nonzero.
It also decodes the recovery_reason value into English.
BUG=chromium-os:20972
TEST=manual
1. Use gbb_utility to create a BIOS with valid bitmaps, but with gbb.flags
set to a non-zero value. Boot into recovery mode. You should see the
warning that gbb.flags is non-zero, and the value itself.
2. Press TAB. The recovery_reason field should display not only a value, but
also an English string explaining the value.
Change-Id: I99b7aa35bc67453bdf3385b9573491090c3dec1d
Reviewed-on: http://gerrit.chromium.org/gerrit/8459
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To prevent execution permissions lost after being copied to /tmp, force adding
a+rx to the staging file.
BUG=chromium-os:20797
TEST=sudo sign_official_build.sh ssd \
x86-zgb-0.16.1089.0.bin ../../tests/devkeys ssd_image.bin
Change-Id: Ibee12dbb3faea9f6b05600d1343620e0af8633fb
Reviewed-on: http://gerrit.chromium.org/gerrit/8263
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Commit-Ready: Gaurav Shah <gauravsh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=manual
Booted in dev-mode. All noises and delays are unchanged (2 second delay when
gbb.flags is 1, 30-second with beeps at 20 seconds when gbb.flags is 0).
Change-Id: I816e57c4f8f6025299851b3d42b4a350f9925994
Reviewed-on: http://gerrit.chromium.org/gerrit/8240
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This enables us to support playing sounds in the background if the BIOS
allows it, so we don't have to block while beeping is happening. The new
declaration is:
VbError_t VbExBeep(uint32_t msec, uint32_t frequency);
If the audio codec can run in the background, then:
zero frequency means OFF, non-zero frequency means ON
zero msec means return immediately, non-zero msec means delay (and
then OFF if needed)
else:
non-zero msec and non-zero frequency means ON, delay, OFF, return
zero msec or zero frequency means do nothing and return immediately
The return value is used by the caller to determine the capabilities. The
implementation should always do the best it can if it cannot fully support
all features - for example, beeping at a fixed frequency if frequency
support is not available. At a minimum, it must delay for the specified
non-zero duration.
Currently, VbExBeep() is called only when displaying the dev-mode screen.
BUG=none
TEST=manual
I've tested on x86 and ARM, all timeouts and noises work as before.
Note that ARM and coreboot will require a corresponding change to their
VbExBeep() implementations, which will have to be handled with separate,
simultaneous CLs.
Change-Id: I3417ae4b99d9d0aee63f2ccaeed39b61d4333e5d
Reviewed-on: http://gerrit.chromium.org/gerrit/8234
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Work around the fact that we have 3 different verity kernel arguments depending
on the image being signed (legacy parameters, new key=value parameters, new key=
value parameters with salt).
Since the signer is not branch conscious, expect and use the old verity binary to
be present when legacy kernel arguments are specified. The last 2 types of verity
arguments can be distinguished based on whether a salt is present.
BUG=chromium-os:20640
TEST=manually tested by signing r14, r15 and r16 images and verifying
that kernel parameters are set correctly.
Change-Id: I96ecf6f506a94509a64ef12d7a108e977f94c23c
Reviewed-on: http://gerrit.chromium.org/gerrit/8214
Commit-Ready: Gaurav Shah <gauravsh@chromium.org>
Tested-by: Gaurav Shah <gauravsh@chromium.org>
Reviewed-by: David McMahon <djmm@chromium.org>
Tested-by: David McMahon <djmm@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is again working around the fact that the signer isn't branch
conscious. Depending on which branch you look at, there are 3 possible
verity parameter styles in use.
This CL allows the kernel parameter test to allow multiple alternatives
for verity dm= parameters.
BUG=chromium-os:20640
TEST=manually tried with a R16, R15 and R14 image
Change-Id: I07554594d6adbdfd1988395d3e91edfd603d8cd4
Reviewed-on: http://gerrit.chromium.org/gerrit/8067
Reviewed-by: Jim Hebert <jimhebert@chromium.org>
Commit-Ready: Gaurav Shah <gauravsh@chromium.org>
Tested-by: Gaurav Shah <gauravsh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This changes the code accept x86.* as an alias for x86 architecture
since both x86 and x86_64 systems will handle things identically
BUG=chromium-os:20336
TEST=try to use update_kernel.sh on a system running an x86_64 kernel
Change-Id: Icf18925bdb8583cd53c6f6254c7493bdec540465
Reviewed-on: http://gerrit.chromium.org/gerrit/7873
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17138
TEST=tested changes on vm8-m2, was able to successfully run au-generate.py
and it used the cgpt binary from au-generate.zip
Change-Id: Ia57f1be4b0d669cad430e51977cce6e26d704320
Reviewed-on: http://gerrit.chromium.org/gerrit/7796
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Reviewed-by: Eric Blake <eblake@chromium.org>
Tested-by: Eric Blake <eblake@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chrome-os-partner:5919
TEST=manual
Until the factory flow has completed, BIOS screens should display a warning
message about GBB.flags. This message should disappear once the flags field
is zero.
You can see the state of the GBB flags in a particular BIOS image using
gbb_utility -g --flags BIOS.bin
And set it with
gbb_utility -s --flags=VALUE BIOS.bin NEWBIOS.bin
Change-Id: I15d336bda571978ece0a9744f19d80f0ae385fb1
Reviewed-on: http://gerrit.chromium.org/gerrit/7719
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=manual
Type 'xyzzy' at dev-mode BIOS screen. What happens next depends on the BIOS.
Change-Id: Ifdb49eb6cb53ecee91f576be91679bd5a232f008
Reviewed-on: http://gerrit.chromium.org/gerrit/7656
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chrome-os-partner:5927
TEST=manual
Install BIOS with valid bitmaps, boot to dev-mode or recovery, press arrow
keys.
Change-Id: I3946bac94cc075f9d11b4dd3fcb118807c3318c4
Reviewed-on: http://gerrit.chromium.org/gerrit/7636
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To prevent hard-coding the procedure to repack a firmware updater, this CL
supports using new "--sb_repack" mode supported by updater so that signer does
not need to care about how the updater is packed anymore.
BUG=chromium-os:20027
TEST=./sign_official_build.sh ssd \
~/trunk/src/build/images/x86-zgb/latest/chromiumos_image.bin \
../../tests/devkeys \
~/trunk/src/build/images/x86-zgb/latest/chromiumos_new_image.bin
# success
Change-Id: I035dfaa86b05b85748e69ec039769b0c08d33f64
Reviewed-on: http://gerrit.chromium.org/gerrit/7311
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: I030c204527e1c17b8d6523beec3b7604a638fc98
Reviewed-on: http://gerrit.chromium.org/gerrit/7444
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=none
Change-Id: Ib717f1008edbb6c11d73fbe42d533ebe45800a45
Reviewed-on: http://gerrit.chromium.org/gerrit/7410
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=manual
make
make runtests
Change-Id: I8456c25187e01666cc46bad50813e8a4d268f1bc
Reviewed-on: http://gerrit.chromium.org/gerrit/7409
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:13037
TEST=none
Change-Id: Ib2a18e44753fd82eb3e2c8aed456abfa4165c235
Reviewed-on: http://gerrit.chromium.org/gerrit/7376
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were some locale bitmaps displayed as question marks (like ???) due to
missing font with ImageMagick. Since we use Pango now, this CL updates the
bitmaps from those locales:
ar el fa hi iw ja ko th vi zh_CN zh_TW
BUG=chromium-os:13037
TEST=for X in ar el fa hi iw ja ko th vi zh_CN zh_TW; do
display $X; done
# all pictures looks fine - at least no question marks anymore
Change-Id: I4b4c443d6afb25cf603f3371a47677744ea9358d
Reviewed-on: http://gerrit.chromium.org/gerrit/7326
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pango provides TTF fontset rendering, which solves i18n text issue.
BUG=chromium-os:13037
TEST=./text_to_bmp localized_text/ja/*.txt
display localized_text/ja/*.bmp $ looks fine
Change-Id: Id2731efa131516125ea9bd27016d44cdd4c50974
Reviewed-on: http://gerrit.chromium.org/gerrit/7152
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: Idca158e82d1ea102221ea3b51d445fadee9d2794
Reviewed-on: http://gerrit.chromium.org/gerrit/7183
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=manual
Press 'TAB' at any BIOS screen. You should see some sha1sums.
Change-Id: Id2f034ad198e4c9c53ab2f2a8fa6195f3479f6aa
Reviewed-on: http://gerrit.chromium.org/gerrit/7101
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Yaay, LoadFirmware() finally has unit tests!
Fix minor memory leak in LoadFirmware().
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: I7eabc14484271f488b77f286e846781ccc22b8f2
(cherry picked from commit 2b7c5635d7069c55a1d96d11b99d02291b7e308b)
Reviewed-on: http://gerrit.chromium.org/gerrit/7052
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: Ia86241f5407ba53d93d3862b29c61b510e560e92
Reviewed-on: http://gerrit.chromium.org/gerrit/6959
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
... instead of using hard-coded 192 constant.
BUG=chromium-os:19876
TEST=manual
If crossystem still reports correct values for devsw_cur recoverysw_cur (and
maybe wpsw_cur, although that's a separate bug), then it works.
Change-Id: Id8d4fb389bfd78f40da9ef08aa372071d77cbec1
Reviewed-on: http://gerrit.chromium.org/gerrit/7014
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The --flags is added to get/set the "flags" field.
BUG=chrome-os-partner:2317
TEST=gbb_utiltiy --get --flags bios.bin # see flags as 0
gbb_utility --set --flags=0x3052 bios.bin
# for version error message for GBB1.0 files,
# and see flag value changed for GBB1.1+ files
gbb_utility --get --flags bios.bin
# flag as 0 for GBB1.0, 0x3052 for GBB1.1+
Change-Id: I7aab62c8fc32ea08b4822e496f543511ff5e5ebc
Reviewed-on: http://gerrit.chromium.org/gerrit/6721
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: Ib1cdb139b695a648fc500ad61c58efc86c7940a9
(cherry picked from commit 5178f3ce82020e8caa287ceee47f9556c0b3bae8)
Reviewed-on: http://gerrit.chromium.org/gerrit/6860
Reviewed-by: Gaurav Shah <gauravsh@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
TEST=emerge-tegra2_aebl vboot_reference
Change-Id: Idc792a1e8b9636a3959fecfde85110e560a64895
Reviewed-on: http://gerrit.chromium.org/gerrit/6836
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: If2fbfb788bc3199603c8646e8f1c9e061199bc6f
Reviewed-on: http://gerrit.chromium.org/gerrit/6832
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: I8ea6bcc15f277e10c5b8539f2ea19ad90be34889
Reviewed-on: http://gerrit.chromium.org/gerrit/6770
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:18492
TEST=manually on new and old image.
Change-Id: Ifa7ab70cd2cd3629656d167cd6f4bfaae8f7f03a
Reviewed-on: http://gerrit.chromium.org/gerrit/6589
Reviewed-by: Elly Jones <ellyjones@chromium.org>
Tested-by: Gaurav Shah <gauravsh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:18631
TEST=manual
Boot to recovery mode screen. HWID should be the same size and shape as the
rest of the text.
Change-Id: Iee0b0611c1319a304d911b710dd7f35ef999a1eb
Reviewed-on: http://gerrit.chromium.org/gerrit/6667
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
| |
BUG=chromium-os:17564
TEST=make && make runtests
Change-Id: I6437e41f55d5b705a3768d325999847c5753a13d
Reviewed-on: http://gerrit.chromium.org/gerrit/6627
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rather than [start, size] pair.
BUG=no bug id
TEST=tested on chroot.
Change-Id: I34ec1f654f88f2e9a27b06f07825ff8bf4d9cd8e
Reviewed-on: http://gerrit.chromium.org/gerrit/6573
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Tested-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
|