path: root/power/rk3399.c

/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* rk3399 chipset power control module for Chrome EC */

/*
 * The description of each CONFIG_CHIPSET_POWER_SEQ_VERSION:
 *
 * Version 0: Initial/default revision.
 * Version 1: Control signals PP900_PLL_EN and PP900_PMU_EN
 *	      are merged with PP900_USB_EN.
 * Version 2: Simplified power tree, fewer control signals.
 */

#include "charge_state.h"
#include "chipset.h"
#include "common.h"
#include "console.h"
#include "ec_commands.h"
#include "gpio.h"
#include "hooks.h"
#include "lid_switch.h"
#include "power.h"
#include "power_button.h"
#include "system.h"
#include "task.h"
#include "timer.h"
#include "usb_charge.h"
#include "util.h"

/* Console output macros */
#define CPUTS(outstr) cputs(CC_CHIPSET, outstr)
#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)

/* Input state flags */
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 2
	#define IN_PGOOD_PP1250_S3   POWER_SIGNAL_MASK(PP1250_S3_PWR_GOOD)
	#define IN_PGOOD_PP900_S0    POWER_SIGNAL_MASK(PP900_S0_PWR_GOOD)
#else
	#define IN_PGOOD_PP5000      POWER_SIGNAL_MASK(PP5000_PWR_GOOD)
	#define IN_PGOOD_SYS         POWER_SIGNAL_MASK(SYS_PWR_GOOD)
#endif

#define IN_PGOOD_AP            POWER_SIGNAL_MASK(AP_PWR_GOOD)
#define IN_SUSPEND_DEASSERTED  POWER_SIGNAL_MASK(SUSPEND_DEASSERTED)

/* Rails requires for S3 and S0 */
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 2
	#define IN_PGOOD_S3    (IN_PGOOD_PP1250_S3)
	#define IN_PGOOD_S0    (IN_PGOOD_S3 | IN_PGOOD_PP900_S0 | IN_PGOOD_AP)
#else
	#define IN_PGOOD_S3    (IN_PGOOD_PP5000)
	#define IN_PGOOD_S0    (IN_PGOOD_S3 | IN_PGOOD_AP | IN_PGOOD_SYS)
#endif

/* All inputs in the right state for S0 */
#define IN_ALL_S0              (IN_PGOOD_S0 | IN_SUSPEND_DEASSERTED)

/* Long power key press to force shutdown in S0 */
#define FORCED_SHUTDOWN_DELAY  (8 * SECOND)

#define CHARGER_INITIALIZED_DELAY_MS 100
#define CHARGER_INITIALIZED_TRIES 40

/* Data structure for a GPIO operation for power sequencing */
struct power_seq_op {
	/* enum gpio_signal in 8 bits */
	uint8_t signal;
	uint8_t level;
	/* Number of milliseconds to delay after setting signal to level */
	uint8_t delay;
};
BUILD_ASSERT(GPIO_COUNT < 256);

/*
 * This is the power sequence for POWER_S5S3.
 * The entries in the table are handled sequentially from the top
 * to the bottom.
 */
static const struct power_seq_op s5s3_power_seq[] = {
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 2
	{ GPIO_PP900_S3_EN, 1, 2 },
	{ GPIO_SYS_RST_L, 1, 0 },
	{ GPIO_PP3300_S3_EN, 1, 2 },
	{ GPIO_PP1800_S3_EN, 1, 2 },
	{ GPIO_PP1250_S3_EN, 1, 2 },
#else
	{ GPIO_PPVAR_LOGIC_EN, 1, 0 },
	{ GPIO_PP900_AP_EN, 1, 0 },
	{ GPIO_PP900_PCIE_EN, 1, 2 },
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 0
	{ GPIO_PP900_PMU_EN, 1, 0 },
	{ GPIO_PP900_PLL_EN, 1, 0 },
#endif
	{ GPIO_PP900_USB_EN, 1, 2 },
	{ GPIO_SYS_RST_L, 0, 0 },
	{ GPIO_PP1800_PMU_EN_L, 0, 2 },
	{ GPIO_LPDDR_PWR_EN, 1, 2 },
	{ GPIO_PP1800_USB_EN_L, 0, 2 },
	{ GPIO_PP3300_USB_EN_L, 0, 0 },
	{ GPIO_PP5000_EN, 1, 0 },
	{ GPIO_PP3300_TRACKPAD_EN_L, 0, 1 },
	{ GPIO_PP1800_LID_EN_L, 0, 0 },
	{ GPIO_PP1800_SIXAXIS_EN_L, 0, 2},
	{ GPIO_PP1800_SENSOR_EN_L, 0, 0},
#endif
};

/* The power sequence for POWER_S3S0 */
static const struct power_seq_op s3s0_power_seq[] = {
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 2
	{ GPIO_PP900_S0_EN, 1, 2 },
	{ GPIO_PP1800_USB_EN, 1, 2 },
	{ GPIO_PP3300_S0_EN, 1, 2 },
	{ GPIO_AP_CORE_EN, 1, 2 },
	{ GPIO_PP1800_S0_EN, 1, 0},
#else
	{ GPIO_PPVAR_CLOGIC_EN, 1, 2 },
	{ GPIO_PP900_DDRPLL_EN, 1, 2 },
	{ GPIO_PP1800_AP_AVDD_EN_L, 0, 2 },
	{ GPIO_AP_CORE_EN, 1, 2 },
	{ GPIO_PP1800_S0_EN_L, 0, 2 },
	{ GPIO_PP3300_S0_EN_L, 0, 0 },
#endif
};

/* The power sequence for POWER_S0S3 */
static const struct power_seq_op s0s3_power_seq[] = {
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 2
	{ GPIO_PP1800_S0_EN, 0, 1 },
	{ GPIO_AP_CORE_EN, 0, 20 },
	{ GPIO_PP3300_S0_EN, 0, 20 },
	{ GPIO_PP1800_USB_EN, 0, 1 },
	{ GPIO_PP900_S0_EN, 0, 1 },
#else
	{ GPIO_PP3300_S0_EN_L, 1, 20 },
	{ GPIO_PP1800_S0_EN_L, 1, 1 },
	{ GPIO_AP_CORE_EN, 0, 20 },
	{ GPIO_PP1800_AP_AVDD_EN_L, 1, 1 },
	{ GPIO_PP900_DDRPLL_EN, 0, 1 },
	{ GPIO_PPVAR_CLOGIC_EN, 0, 0 },
#endif
};

/* The power sequence for POWER_S3S5 */
static const struct power_seq_op s3s5_power_seq[] = {
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 2
	{ GPIO_PP1250_S3_EN, 0, 2 },
	{ GPIO_PP1800_S3_EN, 0, 2 },
	{ GPIO_PP3300_S3_EN, 0, 2 },
	{ GPIO_PP900_S3_EN, 0, 0 },
#else
	{ GPIO_PP1800_SENSOR_EN_L, 1, 0},
	{ GPIO_PP1800_SIXAXIS_EN_L, 1, 0},
	{ GPIO_PP1800_LID_EN_L, 1, 0 },
	{ GPIO_PP3300_TRACKPAD_EN_L, 1, 0 },
	{ GPIO_PP5000_EN, 0, 0 },
	{ GPIO_PP3300_USB_EN_L, 1, 20 },
	{ GPIO_PP1800_USB_EN_L, 1, 10 },
	{ GPIO_LPDDR_PWR_EN, 0, 20 },
	{ GPIO_PP1800_PMU_EN_L, 1, 2 },
#if CONFIG_CHIPSET_POWER_SEQ_VERSION == 0
	{ GPIO_PP900_PLL_EN, 0, 0 },
	{ GPIO_PP900_PMU_EN, 0, 0 },
#endif
	{ GPIO_PP900_USB_EN, 0, 6 },
	{ GPIO_PP900_PCIE_EN, 0, 0 },
	{ GPIO_PP900_AP_EN, 0, 0 },
	{ GPIO_PPVAR_LOGIC_EN, 0, 0 },
#endif
};

static int forcing_shutdown;

void chipset_force_shutdown(void)
{
	CPRINTS("%s()", __func__);

	/*
	 * Force power off. This condition will reset once the state machine
	 * transitions to G3.
	 */
	forcing_shutdown = 1;
	task_wake(TASK_ID_CHIPSET);
}

#define SYS_RST_HOLD_US (1 * MSEC)
void chipset_reset(int cold_reset)
{
#ifdef CONFIG_CMD_RTC
	/* Print out the RTC to help correlate resets in logs. */
	print_system_rtc(CC_CHIPSET);
#endif
	/* TODO: handle cold_reset */
	CPRINTS("%s(%d)", __func__, cold_reset);

	/* Pulse SYS_RST */
	gpio_set_level(GPIO_SYS_RST_L, 0);
	if (in_interrupt_context())
		udelay(SYS_RST_HOLD_US);
	else
		usleep(SYS_RST_HOLD_US);
	gpio_set_level(GPIO_SYS_RST_L, 1);
}

enum power_state power_chipset_init(void)
{
	if (system_jumped_to_this_image()) {
		if ((power_get_signals() & IN_ALL_S0) == IN_ALL_S0) {
			disable_sleep(SLEEP_MASK_AP_RUN);
			CPRINTS("already in S0");
			return POWER_S0;
		}
	} else if (!(system_get_reset_flags() & RESET_FLAG_AP_OFF))
		/* Auto-power on */
		chipset_exit_hard_off();

	return POWER_G3;
}

static void force_shutdown(void)
{
	forcing_shutdown = 1;
	task_wake(TASK_ID_CHIPSET);
}
DECLARE_DEFERRED(force_shutdown);

/*
 * Debounce PGOOD_AP if we lose it suddenly during S0, since output voltage
 * transitions may cause spurious pulses.
 */
#define PGOOD_AP_DEBOUNCE_TIMEOUT (100 * MSEC)

/*
 * The AP informs the EC of its S0 / S3 state through IN_SUSPEND_DEASSERTED /
 * AP_EC_S3_S0_L. Latency between deassertion and power rails coming up must
 * be minimized, so check for deassertion at various stages of our suspend
 * power sequencing, and immediately transition out of suspend if necessary.
 */
#define SLEEP_INTERVAL_MS 5
#define MSLEEP_CHECK_ABORTED_SUSPEND(msec) \
	do { \
		int sleep_remain = msec; \
		do { \
			msleep(MIN(sleep_remain, SLEEP_INTERVAL_MS)); \
			sleep_remain -= SLEEP_INTERVAL_MS; \
			if (!forcing_shutdown && \
			    power_get_signals() & IN_SUSPEND_DEASSERTED)  { \
				CPRINTS("suspend aborted"); \
				return POWER_S3S0; \
			} \
		} while (sleep_remain > 0); \
	} while (0)
BUILD_ASSERT(POWER_S3S0 != 0);

/**
 * Step through the power sequence table and do corresponding GPIO operations.
 *
 * @param	power_seq_ops	The pointer to the power sequence table.
 * @param	op_count	The number of entries of power_seq_ops.
 * @return	non-zero if suspend aborted during POWER_S0S3, 0 otherwise.
 */
static int power_seq_run(const struct power_seq_op *power_seq_ops, int op_count)
{
	int i;

	for (i = 0; i < op_count; i++) {
		gpio_set_level(power_seq_ops[i].signal,
			       power_seq_ops[i].level);
		if (!power_seq_ops[i].delay)
			continue;
		if (power_seq_ops == s0s3_power_seq)
			MSLEEP_CHECK_ABORTED_SUSPEND(power_seq_ops[i].delay);
		else
			msleep(power_seq_ops[i].delay);
	}
	return 0;
}

enum power_state power_handle_state(enum power_state state)
{
	static int sys_reset_asserted;
	int tries = 0;

	switch (state) {
	case POWER_G3:
		break;

	case POWER_S5:
		if (forcing_shutdown)
			return POWER_S5G3;
		else
			return POWER_S5S3;
		break;

	case POWER_S3:
		if (!power_has_signals(IN_PGOOD_S3) || forcing_shutdown)
			return POWER_S3S5;
		else if (power_get_signals() & IN_SUSPEND_DEASSERTED)
			return POWER_S3S0;
		break;

	case POWER_S0:
		if (!power_has_signals(IN_PGOOD_S3) ||
		    forcing_shutdown ||
		    !(power_get_signals() & IN_SUSPEND_DEASSERTED))
			return POWER_S0S3;

#if CONFIG_CHIPSET_POWER_SEQ_VERSION != 2
		/*
		 * Wait up to PGOOD_AP_DEBOUNCE_TIMEOUT for IN_PGOOD_AP to
		 * come back before transitioning back to S3. PGOOD_SYS can
		 * also glitch, with a glitch duration < 1ms, so debounce
		 * it here as well.
		 */
		if (power_wait_signals_timeout(IN_PGOOD_AP | IN_PGOOD_SYS,
					       PGOOD_AP_DEBOUNCE_TIMEOUT)
					       == EC_ERROR_TIMEOUT)
			return POWER_S0S3;

		/*
		 * power_wait_signals_timeout() can block and consume task
		 * wake events, so re-verify the state of the world.
		 */
		if (!power_has_signals(IN_PGOOD_S3) ||
		    forcing_shutdown ||
		    !(power_get_signals() & IN_SUSPEND_DEASSERTED))
			return POWER_S0S3;
#endif

		break;

	case POWER_G3S5:
		forcing_shutdown = 0;

		/*
		 * Allow time for charger to be initialized, in case we're
		 * trying to boot the AP with no battery.
		 */
		while (charge_prevent_power_on(0) &&
		       tries++ < CHARGER_INITIALIZED_TRIES) {
			msleep(CHARGER_INITIALIZED_DELAY_MS);
		}

		/* Return to G3 if battery level is too low. */
		if (charge_want_shutdown() ||
		    tries > CHARGER_INITIALIZED_TRIES) {
			CPRINTS("power-up inhibited");
			chipset_force_shutdown();
			return POWER_G3;
		}

		/* Power up to next state */
		return POWER_S5;

	case POWER_S5S3:
		power_seq_run(s5s3_power_seq, ARRAY_SIZE(s5s3_power_seq));

		/*
		 * Assert SYS_RST now, to be released in S3S0, to avoid
		 * resetting the TPM soon after power-on.
		 */
		sys_reset_asserted = 1;

		/*
		 * TODO: Consider ADC_PP900_AP / ADC_PP1200_LPDDR analog
		 * voltage levels for state transition.
		 */
		if (power_wait_signals(IN_PGOOD_S3)) {
			chipset_force_shutdown();
			return POWER_S3S5;
		}

		/* Call hooks now that rails are up */
		hook_notify(HOOK_CHIPSET_STARTUP);

		/* Power up to next state */
		return POWER_S3;

	case POWER_S3S0:
		power_seq_run(s3s0_power_seq, ARRAY_SIZE(s3s0_power_seq));

		/* Release SYS_RST if we came from S5 */
		if (sys_reset_asserted) {
			msleep(10);
			gpio_set_level(GPIO_SYS_RST_L, 1);

			sys_reset_asserted = 0;
		}

		if (power_wait_signals(IN_PGOOD_S0)) {
			chipset_force_shutdown();
			return POWER_S3S0;
		}

		/* Call hooks now that rails are up */
		hook_notify(HOOK_CHIPSET_RESUME);

		/*
		 * Disable idle task deep sleep. This means that the low
		 * power idle task will not go into deep sleep while in S0.
		 */
		disable_sleep(SLEEP_MASK_AP_RUN);

		/* Power up to next state */
		return POWER_S0;

	case POWER_S0S3:
		/* Call hooks before we remove power rails */
		hook_notify(HOOK_CHIPSET_SUSPEND);
		MSLEEP_CHECK_ABORTED_SUSPEND(20);

		if (power_seq_run(s0s3_power_seq, ARRAY_SIZE(s0s3_power_seq)))
			return POWER_S3S0;

		/*
		 * Enable idle task deep sleep. Allow the low power idle task
		 * to go into deep sleep in S3 or lower.
		 */
		enable_sleep(SLEEP_MASK_AP_RUN);

		/*
		 * In case the power button is held awaiting power-off timeout,
		 * power off immediately now that we're entering S3.
		 */
		if (power_button_is_pressed()) {
			forcing_shutdown = 1;
			hook_call_deferred(&force_shutdown_data, -1);
		}

		return POWER_S3;

	case POWER_S3S5:
		/* Call hooks before we remove power rails */
		hook_notify(HOOK_CHIPSET_SHUTDOWN);

		power_seq_run(s3s5_power_seq, ARRAY_SIZE(s3s5_power_seq));

		/* Start shutting down */
		return POWER_S5;

	case POWER_S5G3:
		return POWER_G3;
	}

	return state;
}

static void power_button_changed(void)
{
	if (power_button_is_pressed()) {
		if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
			/* Power up from off */
			chipset_exit_hard_off();

		/* Delayed power down from S0/S3, cancel on PB release */
		hook_call_deferred(&force_shutdown_data,
				   FORCED_SHUTDOWN_DELAY);
	} else {
		/* Power button released, cancel deferred shutdown */
		hook_call_deferred(&force_shutdown_data, -1);
	}
}
DECLARE_HOOK(HOOK_POWER_BUTTON_CHANGE, power_button_changed, HOOK_PRIO_DEFAULT);

#ifdef CONFIG_LID_SWITCH
static void lid_changed(void)
{
	/* Power-up from off on lid open */
	if (lid_is_open() && chipset_in_state(CHIPSET_STATE_ANY_OFF))
		chipset_exit_hard_off();
}
DECLARE_HOOK(HOOK_LID_CHANGE, lid_changed, HOOK_PRIO_DEFAULT);
#endif