path: root/driver/tcpm/nct38xx.c

/*
 * Copyright 2019 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Type-C port manager for Nuvoton NCT38XX. */

#include "common.h"
#include "console.h"
#include "nct38xx.h"
#include "tcpci.h"

#if !defined(CONFIG_USB_PD_TCPM_TCPCI)
#error "NCT38XX is using part of standard TCPCI control"
#error "Please upgrade your board configuration"
#endif

#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)

#define POLARITY_NORMAL    0
#define POLARITY_FLIPPED   1
#define POLARITY_NONE      3

static int cable_polarity[CONFIG_USB_PD_PORT_COUNT];
static unsigned char txBuf[33];
static unsigned char rxBuf[33];
/* Save the selected rp value */
static int selected_rp[CONFIG_USB_PD_PORT_COUNT];

static int nct38xx_tcpm_init(int port)
{
	int rv = 0;
	int reg;

	cable_polarity[port] = POLARITY_NONE;

	rv = tcpci_tcpm_init(port);
		if (rv)
			return rv;

	/*
	 * Write to the CONTROL_OUT_EN register to enable:
	 * [6] - CONNDIREN : Connector direction indication output enable
	 * [2] - SNKEN     : VBUS sink enable output enable
	 * [0] - SRCEN     : VBUS source voltage enable output enable
	 */
	reg = NCT38XX_REG_CTRL_OUT_EN_SRCEN |
			NCT38XX_REG_CTRL_OUT_EN_SNKEN |
			NCT38XX_REG_CTRL_OUT_EN_CONNDIREN;

	rv = tcpc_write(port, NCT38XX_REG_CTRL_OUT_EN, reg);
	if (rv)
		return rv;

	/* Disable OVP */
	rv = tcpc_read(port, TCPC_REG_FAULT_CTRL, &reg);
	if (rv)
		return rv;
	reg = reg | TCPC_REG_FAULT_CTRL_VBUS_OVP_FAULT_DIS;
	rv = tcpc_write(port, TCPC_REG_FAULT_CTRL, reg);
	if (rv)
		return rv;

	/* Enable VBus monitor */
	rv = tcpc_read(port, TCPC_REG_POWER_CTRL, &reg);
	if (rv)
		return rv;
	reg = reg & ~TCPC_REG_POWER_CTRL_VBUS_VOL_MONITOR_DIS;
	rv = tcpc_write(port, TCPC_REG_POWER_CTRL, reg);
	if (rv)
		return rv;

	/* Start VBus monitor */
	rv = tcpc_write(port, TCPC_REG_COMMAND,
			TCPC_REG_COMMAND_ENABLE_VBUS_DETECT);
	return rv;
}

static int tcpci_nct38xx_select_rp_value(int port, int rp)
{
	selected_rp[port] = rp;
	return EC_SUCCESS;
}

static int auto_discharge_disconnect(int port, int enable)
{
	int reg, rv;

	rv = tcpc_read(port, TCPC_REG_POWER_CTRL, &reg);
	if (rv)
		return rv;

	if (enable)
		reg = reg | TCPC_REG_POWER_CTRL_AUTO_DISCHARGE_DISCONNECT;
	else
		reg = reg & ~TCPC_REG_POWER_CTRL_AUTO_DISCHARGE_DISCONNECT;
	rv = tcpc_write(port, TCPC_REG_POWER_CTRL, reg);
	return rv;

}

static int tcpci_nct38xx_check_cable_polarity(int port)
{
	int cc, rv;

	/* Try to check the polarity */
	rv = tcpc_read(port, TCPC_REG_CC_STATUS, &cc);
	if (rv)
		return rv;

	if (TCPC_REG_CC_STATUS_TERM(cc)) {
		/* TCPC is presenting RD (Sink mode) */
		if ((TCPC_REG_CC_STATUS_CC1(cc) != TYPEC_CC_VOLT_OPEN) &&
			(TCPC_REG_CC_STATUS_CC2(cc) == TYPEC_CC_VOLT_OPEN)) {
			/* CC1 active && CC2 open */
			cable_polarity[port] = POLARITY_NORMAL;
		}
		if ((TCPC_REG_CC_STATUS_CC1(cc) == TYPEC_CC_VOLT_OPEN) &&
			(TCPC_REG_CC_STATUS_CC2(cc) != TYPEC_CC_VOLT_OPEN)) {
			/* CC1 open && CC2 active */
			cable_polarity[port] = POLARITY_FLIPPED;
		}
	} else {
		/* TCPC is presenting RP (Source mode) */
		if ((TCPC_REG_CC_STATUS_CC1(cc) == TYPEC_CC_VOLT_RD) &&
			(TCPC_REG_CC_STATUS_CC2(cc) != TYPEC_CC_VOLT_RD)) {
			/* CC1 active && CC2 open */
			cable_polarity[port] = POLARITY_NORMAL;
		}
		if ((TCPC_REG_CC_STATUS_CC1(cc) != TYPEC_CC_VOLT_RD) &&
			(TCPC_REG_CC_STATUS_CC2(cc) == TYPEC_CC_VOLT_RD)) {
			/* CC1 open && CC2 active */
			cable_polarity[port] = POLARITY_FLIPPED;
		}
	}
	return rv;
}

 /*
  * TODO(crbug.com/951681): This code can be simplified once that bug is fixed.
  */
static int tcpci_nct38xx_set_cc(int port, int pull)
{

	int rv;

	if (cable_polarity[port] == POLARITY_NONE) {
		rv = tcpci_nct38xx_check_cable_polarity(port);
		if (rv)
			return rv;
	}

	if (cable_polarity[port] == POLARITY_NORMAL) {
		rv = tcpc_write(port, TCPC_REG_ROLE_CTRL,
				TCPC_REG_ROLE_CTRL_SET(0, selected_rp[port],
				pull, TYPEC_CC_OPEN));
	} else if (cable_polarity[port] == POLARITY_FLIPPED) {
		rv = tcpc_write(port, TCPC_REG_ROLE_CTRL,
				TCPC_REG_ROLE_CTRL_SET(0, selected_rp[port],
				TYPEC_CC_OPEN, pull));
	} else {
		return -1;
	}

	return rv;
}

static int tcpci_nct38xx_get_cc(int port, int *cc1, int *cc2)
{
	int rv;
	int rc;

	rv = tcpc_read(port, TCPC_REG_ROLE_CTRL, &rc);
	if (rv)
		return rv;

	rv = tcpci_tcpm_get_cc(port, cc1, cc2);
	if (rv)
		return rv;

	if (!TCPC_REG_ROLE_CTRL_DRP(rc)) {
		if ((*cc1 != TYPEC_CC_VOLT_OPEN) &&
			(TCPC_REG_ROLE_CTRL_CC1(rc) == TYPEC_CC_RD))
			*cc1 |= 0x4;
		if ((*cc2 != TYPEC_CC_VOLT_OPEN) &&
			(TCPC_REG_ROLE_CTRL_CC2(rc) == TYPEC_CC_RD))
			*cc2 |= 0x04;
	}

	return rv;
}

int tcpci_nct38xx_drp_toggle(int port)
{
	int rv;

	cable_polarity[port] = POLARITY_NONE;

	/*
	 * The port was disconnected so it is probably a good place to set
	 * auto-discharge-disconnect to '0'
	 *
	 * TODO(crbug.com/951683: this should be removed when common code adds
	 * auto discharge.
	 */
	rv = auto_discharge_disconnect(port, 0);
	if (rv)
		return rv;

	return tcpci_tcpc_drp_toggle(port);

}

int tcpci_nct38xx_set_polarity(int port, int polarity)
{
	int rv, reg;

	rv = tcpc_read(port, TCPC_REG_TCPC_CTRL, &reg);
	if (rv)
		return rv;

	reg = polarity ? (reg | TCPC_REG_TCPC_CTRL_SET(1)) :
			  (reg & ~TCPC_REG_TCPC_CTRL_SET(1));

	rv = tcpc_write(port, TCPC_REG_TCPC_CTRL, reg);
	if (rv)
		return rv;

	/*
	 * Polarity is set after connection so it is probably a good time to set
	 * auto-discharge-disconnect to '1'
	 */
	rv = auto_discharge_disconnect(port, 1);
	return rv;
}

int tcpci_nct38xx_transmit(int port, enum tcpm_transmit_type type,
			uint16_t header, const uint32_t *data)
{
	int rv, num_obj_byte;

	num_obj_byte = PD_HEADER_CNT(header) * 4;

	txBuf[0] = num_obj_byte + 2;

	txBuf[1] = (unsigned char)(header & 0xFF);
	txBuf[2] = (unsigned char)((header >> 8) & 0xFF);

	if (num_obj_byte) {
		uint32_t *buf_ptr;

		buf_ptr = (uint32_t *)&txBuf[3];
		memcpy(buf_ptr, data, num_obj_byte);
	}

	/* total write size = size header (1 byte) + message size */
	rv = tcpc_write_block(port, TCPC_REG_TX_BYTE_CNT,
					(const uint8_t *)txBuf, txBuf[0] + 1);

	rv = tcpc_write(port, TCPC_REG_TRANSMIT, TCPC_REG_TRANSMIT_SET(type));
	return rv;
}

static int tcpci_nct38xx_get_message_raw(int port, uint32_t *payload, int *head)
{
	int rv, cnt, num_obj_byte;

	rv = tcpc_read(port, TCPC_REG_RX_BYTE_CNT, &cnt);

	if (rv != EC_SUCCESS || cnt < 3) {
		rv = EC_ERROR_UNKNOWN;
		goto clear;
	}

	rv = tcpc_read_block(port, TCPC_REG_RX_BYTE_CNT, rxBuf, cnt + 1);
	if (rv != EC_SUCCESS)
		goto clear;

	*head = *(int *)&rxBuf[2];
	num_obj_byte = PD_HEADER_CNT(*head) * 4;

	if (num_obj_byte) {
		uint32_t *buf_ptr;

		buf_ptr = (uint32_t *)&rxBuf[4];
		memcpy(payload, buf_ptr, num_obj_byte);
	}

clear:
	/* Read complete, clear RX status alert bit */
	tcpc_write16(port, TCPC_REG_ALERT, TCPC_REG_ALERT_RX_STATUS);

	return rv;
}

const struct tcpm_drv nct38xx_tcpm_drv = {
	.init			= &nct38xx_tcpm_init,
	.release		= &tcpci_tcpm_release,
	.get_cc			= &tcpci_nct38xx_get_cc,
#ifdef CONFIG_USB_PD_VBUS_DETECT_TCPC
	.get_vbus_level		= &tcpci_tcpm_get_vbus_level,
#endif
	.select_rp_value	= &tcpci_nct38xx_select_rp_value,
	.set_cc			= &tcpci_nct38xx_set_cc,
	.set_polarity		= &tcpci_nct38xx_set_polarity,
	.set_vconn		= &tcpci_tcpm_set_vconn,
	.set_msg_header		= &tcpci_tcpm_set_msg_header,
	.set_rx_enable		= &tcpci_tcpm_set_rx_enable,
	.get_message_raw	= &tcpci_nct38xx_get_message_raw,
	.transmit		= &tcpci_nct38xx_transmit,
	.tcpc_alert		= &tcpci_tcpc_alert,
#ifdef CONFIG_USB_PD_DISCHARGE_TCPC
	.tcpc_discharge_vbus	= &tcpci_tcpc_discharge_vbus,
#endif
#ifdef CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
	.drp_toggle		= &tcpci_nct38xx_drp_toggle,
#endif
#ifdef CONFIG_USBC_PPC
	.set_snk_ctrl		= &tcpci_tcpm_set_snk_ctrl,
	.set_src_ctrl		= &tcpci_tcpm_set_src_ctrl,
#endif
	.get_chip_info		= &tcpci_get_chip_info,
#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
	.enter_low_power_mode	= &tcpci_enter_low_power_mode,
#endif
};