1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
|
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "chipset.h"
#include "common.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "lid_switch.h"
#define LP8555_REG_COMMAND 0x00
#define LP8555_REG_COMMAND_ON 0x01
#define LP8555_REG_CONFIG 0x10
#define LP8555_REG_CONFIG_MODE_MASK 0x03
#define LP8555_REG_CONFIG_MODE_PWM 0x00
/**
* Enable PWM mode in backlight controller and turn it on.
*/
static int lp8555_enable_pwm_mode(void)
{
int reg;
/* Enable PWM mode. */
i2c_read8(I2C_PORT_BACKLIGHT, I2C_ADDR_BACKLIGHT,
LP8555_REG_CONFIG, ®);
reg &= ~LP8555_REG_CONFIG_MODE_MASK;
reg |= LP8555_REG_CONFIG_MODE_PWM;
i2c_write8(I2C_PORT_BACKLIGHT, I2C_ADDR_BACKLIGHT,
LP8555_REG_CONFIG, reg);
/* Power on. */
i2c_read8(I2C_PORT_BACKLIGHT, I2C_ADDR_BACKLIGHT,
LP8555_REG_COMMAND, ®);
reg |= LP8555_REG_COMMAND_ON;
i2c_write8(I2C_PORT_BACKLIGHT, I2C_ADDR_BACKLIGHT,
LP8555_REG_COMMAND, reg);
return EC_SUCCESS;
}
/**
* Host command to toggle backlight.
*/
static int switch_command_enable_backlight(struct host_cmd_handler_args *args)
{
const struct ec_params_switch_enable_backlight *p = args->params;
gpio_set_level(GPIO_ENABLE_BACKLIGHT, p->enabled);
if (p->enabled)
lp8555_enable_pwm_mode();
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_SWITCH_ENABLE_BKLIGHT,
switch_command_enable_backlight,
EC_VER_MASK(0));
void backlight_interrupt(enum gpio_signal signal)
{
/*
* PCH indicates it is turning on backlight so we should
* attempt to put the backlight controller into PWM mode.
*/
lp8555_enable_pwm_mode();
}
/**
* Update backlight state.
*/
static void update_backlight(void)
{
/*
* Enable backlight if lid is open; this is AND'd with the request from
* the AP in hardware.
*/
gpio_set_level(GPIO_ENABLE_BACKLIGHT, lid_is_open());
}
DECLARE_HOOK(HOOK_LID_CHANGE, update_backlight, HOOK_PRIO_DEFAULT);
/**
* Initialize backlight module.
*/
static void backlight_init(void)
{
gpio_enable_interrupt(GPIO_PCH_BL_EN);
update_backlight();
}
DECLARE_HOOK(HOOK_INIT, backlight_init, HOOK_PRIO_DEFAULT);
|
