1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
|
/* -*- mode:c -*-
*
* Copyright 2015 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
GPIO_INT(LID_OPEN, PIN(27), GPIO_INT_BOTH, lid_interrupt)
GPIO_INT(AC_PRESENT, PIN(30), GPIO_INT_BOTH, extpower_interrupt)
GPIO_INT(WP_L, PIN(33), GPIO_INT_BOTH, switch_interrupt)
/* Buffered power button input from PMIC / ROP_EC_PWR_BTN_L_R */
GPIO_INT(POWER_BUTTON_L, PIN(35), GPIO_INT_BOTH, power_button_interrupt)
/* RSMRST from PMIC */
GPIO_INT(RSMRST_L_PGOOD, PIN(63), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(PCH_SLP_S4_L, PIN(200), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(PCH_SLP_S3_L, PIN(206), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(PCH_SLP_S0_L, PIN(211), GPIO_INT_BOTH, power_signal_interrupt_S0)
GPIO_INT(PCH_SLP_SUS_L, PIN(12), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(PMIC_INT_L, PIN(50), GPIO_INT_FALLING, power_signal_interrupt)
GPIO_INT(PD_MCU_INT, PIN(122), GPIO_INT_FALLING | GPIO_PULL_UP, pd_mcu_interrupt)
GPIO_INT(USB_C0_VBUS_WAKE_L,PIN(152), GPIO_INT_BOTH, vbus0_evt)
GPIO_INT(USB_C1_VBUS_WAKE_L,PIN(123), GPIO_INT_BOTH, vbus1_evt)
GPIO_INT(USB_C0_BC12_INT_L, PIN(124), GPIO_INT_FALLING, usb0_evt)
GPIO_INT(USB_C1_BC12_INT_L, PIN(145), GPIO_INT_FALLING, usb1_evt)
GPIO_INT(PMIC_DPWROK, PIN(133), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(UART0_RX, PIN(162), GPIO_INT_BOTH_DSLEEP | GPIO_PULL_UP, uart_deepsleep_interrupt)
/* PMIC */
GPIO(PMIC_LDO_EN, PIN(55), GPIO_OUT_LOW)
GPIO(PMIC_SLP_SUS_L, PIN(201), GPIO_OUT_LOW)
/* I2C pins - these will be reconfigured for alternate function below */
GPIO(I2C0_0_SCL, PIN(15), GPIO_INPUT)
GPIO(I2C0_0_SDA, PIN(16), GPIO_INPUT)
GPIO(I2C0_1_SCL, PIN(134), GPIO_INPUT)
GPIO(I2C0_1_SDA, PIN(17), GPIO_INPUT)
GPIO(I2C1_SCL, PIN(22), GPIO_INPUT)
GPIO(I2C1_SDA, PIN(23), GPIO_INPUT)
GPIO(I2C2_SCL, PIN(20), GPIO_INPUT)
GPIO(I2C2_SDA, PIN(21), GPIO_INPUT)
GPIO(I2C3_SCL, PIN(24), GPIO_INPUT)
GPIO(I2C3_SDA, PIN(25), GPIO_INPUT)
/* PCH */
GPIO(PCH_SCI_L, PIN(26), GPIO_ODR_HIGH)
GPIO(PCH_SMI_L, PIN(44), GPIO_ODR_HIGH)
GPIO(PCH_PWRBTN_L, PIN(45), GPIO_OUTPUT)
GPIO(PCH_SEC_DISABLE_L, PIN(65), GPIO_OUT_HIGH)
GPIO(PCH_WAKE_L, PIN(66), GPIO_ODR_HIGH)
GPIO(PCH_ACOK, PIN(110), GPIO_OUT_LOW)
GPIO(PCH_RCIN_L, PIN(135), GPIO_ODR_HIGH)
GPIO(PCH_RSMRST_L, PIN(143), GPIO_OUT_LOW)
GPIO(PCH_RTCRST, PIN(163), GPIO_OUT_LOW)
GPIO(SYS_RESET_L, PIN(121), GPIO_ODR_HIGH)
GPIO(ENTERING_RW, PIN(41), GPIO_OUT_LOW)
/* Devices and power */
GPIO(PP1800_DX_DMIC_EN, PIN(11), GPIO_OUT_LOW)
GPIO(PP1800_DX_AUDIO_EN, PIN(141), GPIO_OUT_LOW)
GPIO(PP3300_DX_WLAN_EN, PIN(203), GPIO_OUT_LOW)
GPIO(WLAN_OFF_L, PIN(132), GPIO_OUT_LOW)
GPIO(TRACKPAD_INT_L, PIN(127), GPIO_INPUT)
GPIO(ENABLE_BACKLIGHT, PIN(202), GPIO_OUT_LOW)
GPIO(ENABLE_TOUCHPAD, PIN(53), GPIO_OUT_LOW)
GPIO(BAT_PRESENT_L, PIN(56), GPIO_INPUT)
GPIO(PLATFORM_EC_PROCHOT, PIN(151), GPIO_INPUT)
GPIO(CPU_PROCHOT, PIN(52), GPIO_OUT_LOW)
/* USB PD and port power */
GPIO(PD_RST_L, PIN(130), GPIO_ODR_HIGH)
GPIO(USB_PD_WAKE, PIN(60), GPIO_OUT_HIGH)
GPIO(USB_C0_DP_HPD, PIN(46), GPIO_OUT_LOW)
GPIO(USB_C1_DP_HPD, PIN(51), GPIO_OUT_LOW)
GPIO(USB_C0_5V_EN, PIN(154), GPIO_OUT_LOW)
GPIO(USB_C1_5V_EN, PIN(204), GPIO_OUT_LOW)
GPIO(USB_C0_CHARGE_EN_L, PIN(64), GPIO_OUT_LOW)
GPIO(USB_C1_CHARGE_EN_L, PIN(210), GPIO_OUT_LOW)
GPIO(USB1_ENABLE, PIN(36), GPIO_OUT_LOW)
GPIO(USB2_OTG_ID, PIN(13), GPIO_ODR_LOW)
GPIO(USB2_OTG_VBUSSENSE, PIN(140), GPIO_OUT_LOW)
/* Board version */
GPIO(BOARD_VERSION1, PIN(10), GPIO_INPUT)
GPIO(BOARD_VERSION2, PIN(7), GPIO_INPUT)
GPIO(BOARD_VERSION3, PIN(6), GPIO_INPUT)
GPIO(KBD_KSO2, PIN(101), GPIO_KB_OUTPUT_COL2)
GPIO(PVT_CS0, PIN(146), GPIO_ODR_HIGH)
GPIO(KEYBOARD_BACKLIGHT, PIN(34), GPIO_OUT_LOW)
/*
* TODO(crosbug.com/p/40848): These LEDs should be under control of the mec1322
* LED control unit. Remove these GPIO definitions once the LED control unit
* is functional.
*/
GPIO(CHARGE_LED_1, PIN(155), GPIO_OUT_LOW)
GPIO(CHARGE_LED_2, PIN(156), GPIO_OUT_LOW)
/* This pins are either NC, NC / pulled up, or connected to test points */
GPIO(I2C2_SENSOR_3V3_SCL, PIN(20), GPIO_INPUT)
GPIO(I2C2_SENSOR_3V3_SDA, PIN(21), GPIO_INPUT)
GPIO(NC_031, PIN(31), GPIO_INPUT | GPIO_PULL_UP)
GPIO(NC_047, PIN(47), GPIO_INPUT | GPIO_PULL_UP)
GPIO(NC_067, PIN(67), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_FAN1_TTACH, PIN(105), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_FAN1_PWM, PIN(136), GPIO_INPUT | GPIO_PULL_UP)
GPIO(ACCELGYRO3_INT_L, PIN(147), GPIO_INPUT)
GPIO(SHD_CS0_L, PIN(150), GPIO_INPUT)
GPIO(ACCELGYRO4_INT_L, PIN(157), GPIO_INPUT)
GPIO(TABLET_MODE_EC, PIN(160), GPIO_INPUT | GPIO_PULL_UP)
GPIO(ACCEL1_INT_L, PIN(161), GPIO_INPUT)
/* Alternate functions GPIO definitions */
/* GPIO162(UART_RX), GPIO165(UART_TX) */
ALTERNATE(PIN_MASK(16, 0x24), 1, MODULE_UART, 0)
/* KB pins */
/* KB ROW - GPIO000-GPIO005 */
ALTERNATE(PIN_MASK(0, 0x3f), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)
/* KB ROW - GPIO100, GPIO102-GPIO104, GPIO106-GPIO107 */
ALTERNATE(PIN_MASK(10, 0xdd), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)
/* KB COL - GPIO032 */
ALTERNATE(PIN_MASK(3, 0x04), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
/* KB COL - GPIO040, GPIO42-GPIO43 */
ALTERNATE(PIN_MASK(4, 0x0d), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
/* KB COL - GPIO125-GPIO126 */
ALTERNATE(PIN_MASK(12, 0x60), 2, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
/* KB COL - GPIO142, GPIO144 */
ALTERNATE(PIN_MASK(14, 0x14), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
/* Keyboard Backlight PWM - GPIO34 */
ALTERNATE(PIN_MASK(3, 0x10), 1, MODULE_PWM, 0)
/* LPC pins */
/* LPC_CLK_RUN_L - GPIO014 */
ALTERNATE(PIN_MASK(1, 0x10), 1, MODULE_LPC, 0)
/* LAD[0:3] - GPIO111-GPIO114, SERIRQ - GPIO115, PCI_CLK - GPIO117 */
ALTERNATE(PIN_MASK(11, 0xbe), 1, MODULE_LPC, 0)
/* LRESET# - GPIO116 */
ALTERNATE(PIN_MASK(11, 0x40), 1, MODULE_LPC, GPIO_INT_BOTH)
/* LFRAME# - GPIO120 */
ALTERNATE(PIN_MASK(12, 0x01), 1, MODULE_LPC, 0)
/* SPI pins */
/* MOSI - GPIO054 */
ALTERNATE(PIN_MASK(5, 0x10), 1, MODULE_SPI, 0)
/* MISO - GPIO164 */
ALTERNATE(PIN_MASK(16, 0x10), 1, MODULE_SPI, GPIO_PULL_UP)
/* PVT_SCLK - GPIO153 */
ALTERNATE(PIN_MASK(15, 0x08), 1, MODULE_SPI, 0)
/* I2C pins */
/* I2C0_0 CLK - GPIO015, I2C0_0 DAT - GPIO016, I2C0_1 DAT - GPIO017 */
ALTERNATE(PIN_MASK(1, 0xe0), 2, MODULE_I2C, GPIO_ODR_HIGH)
/* I2C{1,3} CLK / DAT - GPIO022-GPIO025*/
ALTERNATE(PIN_MASK(2, 0x3c), 2, MODULE_I2C, GPIO_ODR_HIGH)
/* I2C0_1 CLK - GPIO134 */
ALTERNATE(PIN_MASK(13, 0x10), 2, MODULE_I2C, GPIO_ODR_HIGH)
/* ADC pins */
/* ADC1 - GPIO057 / PPVAR_BOOSTIN_SENSE */
ALTERNATE(PIN_MASK(5, 0x80), 1, MODULE_ADC, GPIO_ANALOG)
/* ADC3 - GPIO061 / IADP_ACMON_BMON. ADC4 - GPIO062 / PMON_PSYS */
ALTERNATE(PIN_MASK(6, 0x06), 1, MODULE_ADC, GPIO_ANALOG)
/* LED1 - GPIO155. LED2 - GPIO156 */
/* ALTERNATE(PIN_MASK(15, 0x60), 2, MODULE_POWER_LED, 0) */
/* VCC1_RST# - GPIO131 */
ALTERNATE(PIN_MASK(13, 0x02), 1, MODULE_PMU, GPIO_ODR_HIGH)
/* nRESET_OUT - GPIO121 */
ALTERNATE(PIN_MASK(12, 0x02), 1, MODULE_PMU, GPIO_ODR_HIGH)
|
