1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
|
/* -*- mode:c -*-
*
* Copyright 2020 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* GSC Signals */
GPIO_INT(EC_WP_L, PIN(5, 0), GPIO_INT_BOTH, switch_interrupt) /* Write Protect Enabled */
GPIO(CCD_MODE_ODL, PIN(C, 6), GPIO_INPUT) /* Case Closed Debug Mode */
GPIO(EC_GSC_PACKET_MODE, PIN(B, 1), GPIO_OUT_LOW) /* GSC Packet Mode */
ALTERNATE( PIN_MASK(6, BIT(4) | BIT(5)), 0, MODULE_UART, 0) /* UART_EC_TX_GSC_DBG_RX_R, UART_GSC_DBG_TX_EC_RX_R */
/* Power Signals */
GPIO_INT(MECH_PWR_BTN_ODL, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW, power_button_interrupt) /* Mechanical Power Button */
GPIO_INT(EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) /* Power Button */
GPIO_INT(SLP_S3_L, PIN(6, 1), GPIO_INT_BOTH, baseboard_en_pwr_s0) /* Sleep S3 */
GPIO_INT(SLP_S5_L, PIN(7, 2), GPIO_INT_BOTH, power_signal_interrupt) /* Sleep S5 */
GPIO_INT(SLP_S3_S0I3_L, PIN(7, 4), GPIO_INT_BOTH, power_signal_interrupt) /* Sleep S0ix */
GPIO_INT(PG_PWR_S5, PIN(C, 0), GPIO_INT_BOTH, baseboard_en_pwr_s0) /* S5 Power OK */
GPIO_INT(PG_PCORE_S0_R_OD, PIN(B, 6), GPIO_INT_BOTH, power_signal_interrupt) /* S0 Power OK */
GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) /* AC Power Present */
GPIO_INT(EC_PCORE_INT_ODL, PIN(F, 0), GPIO_INT_BOTH | GPIO_PULL_UP, power_signal_interrupt) /* Power Core Interrupt */
GPIO_INT(PG_GROUPC_S0_OD, PIN(A, 3), GPIO_INT_BOTH, baseboard_en_pwr_pcore_s0) /* Power Group C S0 */
GPIO_INT(PG_LPDDR4X_S3_OD, PIN(9, 5), GPIO_INT_BOTH, baseboard_en_pwr_pcore_s0) /* Power Group LPDDR4 S3 */
GPIO(EN_PWR_S5, PIN(B, 7), GPIO_OUT_LOW) /* Enable S5 Power */
GPIO(EN_PWR_S0_R, PIN(F, 1), GPIO_OUT_LOW)
GPIO(EN_PWR_PCORE_S0_R, PIN(E, 1), GPIO_OUT_LOW)
ALTERNATE(/*MECH_PWR_BTN_ODL*/ PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0) /* PSL - Mechanical Power Button */
ALTERNATE(/*LID_OPEN*/ PIN_MASK(0, BIT(2)), 0, MODULE_PMU, 0) /* PSL - Lid Open */
ALTERNATE(/*ACOK_OD*/ PIN_MASK(0, BIT(0)), 0, MODULE_PMU, 0) /* PSL - AC Power Present */
/* SOC Signals */
UNIMPLEMENTED(ENTERING_RW) /* GPIO_ENTERING_RW */
GPIO(EC_SYS_RST_L, PIN(7, 6), GPIO_ODR_HIGH) /* Cold Reset SOC */
GPIO(EC_SOC_RSMRST_L, PIN(C, 5), GPIO_OUT_LOW) /* Resume Reset SOC */
GPIO(EC_CLR_CMOS, PIN(A, 1), GPIO_OUT_LOW) /* Clear SOC CMOS */
GPIO(EC_MEM_EVENT, PIN(A, 5), GPIO_OUT_LOW) /* Memory Thermal Event to SOC*/
GPIO(EC_SOC_PWR_BTN_L, PIN(6, 3), GPIO_OUT_HIGH) /* Power Button to SOC */
GPIO(EC_SOC_PWR_GOOD, PIN(D, 3), GPIO_OUT_LOW) /* Power Good to SOC */
GPIO(EC_SOC_WAKE_L, PIN(0, 3), GPIO_OUT_HIGH) /* Wake SOC */
GPIO(EC_SOC_INT_L, PIN(8, 3), GPIO_OUT_HIGH) /* Matrix Keyboard Protocol Event to SOC */
GPIO(PROCHOT_ODL, PIN(D, 5), GPIO_ODR_HIGH) /* Force SOC into HTC-active state */
GPIO(SOC_ALERT_EC_L, PIN(E, 2), GPIO_INPUT) /* Sideband-Temperature Iterrupt */
GPIO(SOC_THERMTRIP_ODL, PIN(E, 5), GPIO_INPUT) /* Temperature Trip Sensor */
/* USB Signals */
GPIO_INT(USB_C0_TCPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event)
GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(C, 7), GPIO_INT_FALLING, tcpc_alert_event)
GPIO_INT(USB_C0_PPC_INT_ODL, PIN(7, 5), GPIO_INT_FALLING, ppc_interrupt)
GPIO_INT(USB_C1_PPC_INT_ODL, PIN(D, 4), GPIO_INT_FALLING, ppc_interrupt)
GPIO_INT(USB_C0_BC12_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_PULL_UP, bc12_interrupt)
GPIO_INT(USB_C1_BC12_INT_ODL, PIN(9, 6), GPIO_INT_FALLING | GPIO_PULL_UP, bc12_interrupt)
GPIO(USB_C0_C1_FAULT_ODL, PIN(7, 3), GPIO_ODR_HIGH) /* C0/C1 Fault to SOC */
GPIO(USB_C0_TCPC_RST_L, PIN(3, 4), GPIO_OUT_HIGH) /* C0 TCPC Reset */
GPIO(USB_C1_TCPC_RST_L, PIN(3, 7), GPIO_OUT_HIGH) /* C1 TCPC Reset */
GPIO(USB_C0_HPD, PIN(F, 5), GPIO_OUT_LOW) /* C0 DP Hotplug Detect */
GPIO(USB_C1_HPD, PIN(F, 4), GPIO_OUT_LOW) /* C1 DP Hotplug Detect */
/* Sensor Signals */
/* TODO: Make 6AXIS_INT_L an interrupt */
GPIO(6AXIS_INT_L, PIN(A, 0), GPIO_INT_FALLING | GPIO_PULL_UP) /* 6 Axis IMU */
GPIO(3AXIS_INT_L, PIN(A, 2), GPIO_INPUT | GPIO_PULL_DOWN) /* 3 Axis Accel */
GPIO_INT(LID_OPEN, PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) /* Lid Open */
GPIO_INT(TABLET_MODE, PIN(C, 1), GPIO_INT_BOTH, gmr_tablet_switch_isr) /* 360 Tablet Mode */
GPIO_INT(VOLDN_BTN_ODL, PIN(A, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) /* Volume Down */
GPIO_INT(VOLUP_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) /* Volume Up */
GPIO(EC_BATT_PRES_ODL, PIN(9, 4), GPIO_INPUT) /* Battery Present */
ALTERNATE(/*TEMP_SOC|CHRG|MEM*/ PIN_MASK(4, BIT(3) | BIT(4) | BIT(5)), 0, MODULE_ADC, 0) /* SOC, Charger and Memory Temperature */
ALTERNATE( PIN_MASK(4, BIT(1) | BIT(2)), 0, MODULE_ADC, 0) /* EC_ADC_CORE_IMON1, EC_ADC_SOC_IMON2 */
/* LED Signals */
GPIO(EC_DISABLE_DISP_BL, PIN(A, 6), GPIO_OUT_HIGH) /* Disable Display Backlight */
ALTERNATE(/*EC_PWM_LED_CHRG_L*/ PIN_MASK(C, BIT(4)), 0, MODULE_PWM, 0) /* Charging LED */
ALTERNATE(/*EC_PWM_LED_FULL_L*/ PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0) /* Full LED */
/* Fan Signals */
ALTERNATE( PIN_MASK(C, BIT(3)), 0, MODULE_PWM, 0) /* EC_FAN_PWM - Fan PWM */
ALTERNATE( PIN_MASK(4, BIT(0)), 0, MODULE_PWM, 0) /* EC_FAN_SPEED - Fan Speed */
/* I2C Signals -- i2c pins need to be exposed as GPIO for bit banging, even though set to alternate mode below */
GPIO(EC_I2C_USB_A0_C0_SCL, PIN(B, 5), GPIO_INPUT)
GPIO(EC_I2C_USB_A0_C0_SDA, PIN(B, 4), GPIO_INPUT)
GPIO(EC_I2C_USB_A1_C1_SCL, PIN(9, 0), GPIO_INPUT)
GPIO(EC_I2C_USB_A1_C1_SDA, PIN(8, 7), GPIO_INPUT)
GPIO(EC_I2C_BATT_SCL, PIN(9, 2), GPIO_INPUT)
GPIO(EC_I2C_BATT_SDA, PIN(9, 1), GPIO_INPUT)
GPIO(EC_I2C_USBC_MUX_SCL, PIN(D, 1), GPIO_INPUT)
GPIO(EC_I2C_USBC_MUX_SDA, PIN(D, 0), GPIO_INPUT)
GPIO(EC_I2C_POWER_SCL, PIN(F, 3), GPIO_INPUT)
GPIO(EC_I2C_POWER_SDA, PIN(F, 2), GPIO_INPUT)
GPIO(EC_I2C_CBI_SCL, PIN(3, 3), GPIO_INPUT)
GPIO(EC_I2C_CBI_SDA, PIN(3, 6), GPIO_INPUT)
GPIO(EC_I2C_SENSOR_SCL, PIN(E, 4), GPIO_INPUT | GPIO_SEL_1P8V)
GPIO(EC_I2C_SENSOR_SDA, PIN(E, 3), GPIO_INPUT | GPIO_SEL_1P8V)
GPIO(EC_I2C_SOC_SIC, PIN(B, 3), GPIO_INPUT)
GPIO(EC_I2C_SOC_SID, PIN(B, 2), GPIO_INPUT)
ALTERNATE( PIN_MASK(B, BIT(4) | BIT(5)), 0, MODULE_I2C, 0) /* I2C0 */
ALTERNATE( PIN_MASK(9, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */
ALTERNATE( PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0) /* I2C1 SDA */
ALTERNATE( PIN_MASK(D, BIT(0) | BIT(1)), 0, MODULE_I2C, 0) /* I2C3 */
ALTERNATE( PIN_MASK(F, BIT(2) | BIT(3)), 0, MODULE_I2C, 0) /* I2C4 */
ALTERNATE( PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0) /* I2C5 */
ALTERNATE( PIN_MASK(E, BIT(3) | BIT(4)), 0, MODULE_I2C, 0) /* I2C6 */
ALTERNATE( PIN_MASK(B, BIT(2) | BIT(3)), 0, MODULE_I2C, 0) /* I2C7 */
/* Keyboard Signals */
GPIO(EN_KB_BL, PIN(9, 7), GPIO_OUT_HIGH) /* Enable Keyboard Backlight */
ALTERNATE(/*PWM_KB_BL*/ PIN_MASK(C, BIT(2)), 0, MODULE_PWM, 0) /* Keyboard Backlight Level */
ALTERNATE(/*KSI_00-01*/ PIN_MASK(3, BIT(0) | BIT(1)), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)
ALTERNATE(/*KSI_02-07*/ PIN_MASK(2, GENMASK(7, 2)), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)
ALTERNATE(/*KSO_00-01*/ PIN_MASK(2, BIT(0) | BIT(1)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)
GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */
ALTERNATE(/*KSO_03-09*/ PIN_MASK(1, GENMASK(6, 0)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)
ALTERNATE(/*KSO_10-13*/ PIN_MASK(0, GENMASK(7, 4)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)
ALTERNATE(/*KSO_14*/ PIN_MASK(8, BIT(2)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)
#if 0
/*
* SOC eSPI Bus
* These signals do not need to be explicitly configured.
* Leaving here so all signals are documented.
*/
GPIO(ESPI_SOC_CLK, PIN(5, 5), GPIO_DEFAULT)
GPIO(ESPI_SOC_CS_EC_L, PIN(5, 3), GPIO_DEFAULT)
GPIO(ESPI_SOC_D0_EC, PIN(4, 6), GPIO_DEFAULT)
GPIO(ESPI_SOC_D1_EC, PIN(4, 7), GPIO_DEFAULT)
GPIO(ESPI_SOC_D2_EC, PIN(5, 1), GPIO_DEFAULT)
GPIO(ESPI_SOC_D3_EC, PIN(5, 2), GPIO_DEFAULT)
GPIO(EC_ESPI_RST_L, PIN(5, 4), GPIO_DEFAULT)
GPIO(ESPI_EC_ALERT_SOC_L, PIN(5, 7), GPIO_DEFAULT)
#endif
/* TCPC C0 */
IOEX(USB_C0_PPC_EN_L, EXPIN(USBC_PORT_C0, 1, 0), GPIO_OUT_LOW)
IOEX(USB_C0_PPC_ILIM_3A_EN, EXPIN(USBC_PORT_C0, 1, 1), GPIO_OUT_LOW)
IOEX_INT(USB_C0_SBU_FAULT_ODL, EXPIN(USBC_PORT_C0, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt)
IOEX(EN_PP5000_USB_A0_VBUS, EXPIN(USBC_PORT_C0, 1, 5), GPIO_OUT_LOW)
IOEX(USB_A0_LIMIT_SDP, EXPIN(USBC_PORT_C0, 1, 6), GPIO_OUT_LOW)
IOEX(USB_C0_SBU_FLIP, EXPIN(USBC_PORT_C0, 1, 7), GPIO_OUT_LOW)
/* TCPC C1 */
IOEX(USB_A1_RETIMER_EN, EXPIN(USBC_PORT_C1, 0, 0), GPIO_OUT_LOW)
IOEX(USB_A1_RETIMER_RST, EXPIN(USBC_PORT_C1, 0, 1), GPIO_OUT_LOW)
IOEX(USB_C1_IN_HPD, EXPIN(USBC_PORT_C1, 0, 3), GPIO_OUT_LOW)
IOEX(USB_C1_PPC_EN_L, EXPIN(USBC_PORT_C1, 1, 0), GPIO_OUT_LOW)
IOEX(USB_C1_PPC_ILIM_3A_EN, EXPIN(USBC_PORT_C1, 1, 1), GPIO_OUT_LOW)
IOEX_INT(USB_C1_SBU_FAULT_ODL, EXPIN(USBC_PORT_C1, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt)
IOEX(EN_PP5000_USB_A1_VBUS_DB, EXPIN(USBC_PORT_C1, 1, 5), GPIO_OUT_LOW)
IOEX(USB_A1_LIMIT_SDP_DB, EXPIN(USBC_PORT_C1, 1, 6), GPIO_OUT_LOW)
/* Test Points */
GPIO(EC_GPIO56, PIN(5, 6), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_PS2_CLK, PIN(6, 7), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_PS2_DAT, PIN(7, 0), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_PS2_RST, PIN(6, 2), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_GPIOB0, PIN(B, 0), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_GPIO81, PIN(8, 1), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_FLPRG2, PIN(8, 6), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_PSL_GPO, PIN(D, 7), GPIO_INPUT | GPIO_PULL_UP)
GPIO(EC_PWM7, PIN(6, 0), GPIO_INPUT | GPIO_PULL_UP)
|
