summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* bd9995x: Disable IADPDaisuke Nojiri2017-03-231-0/+10
* tcpm: Call usb_mux board_init on exit from low power modeDaisuke Nojiri2017-03-164-6/+17
* Add minimal fpc1140 driverVincent Palatin2017-03-162-0/+154
* BD9995X: Do not overwrite the charging current in idle modeVijay Hiremath2017-03-161-1/+3
* tcpm: anx74xx: Only connect aux to sbu when DP mode is selectedScott2017-03-161-38/+105
* driver: kionix: Add checking whoami value at initialization.Yidi Lin2017-03-131-1/+1
* bd9995x: Do not set IADP monitoring enable bitDaisuke Nojiri2017-03-131-8/+0
* Electro: DP CTS testing failed in HBR2 deterministic JitterRyan Zhang2017-03-101-0/+1
* driver/touchpad_elan: Use slightly more precise pressure adjustmentNicolas Boichat2017-03-081-3/+6
* anx74xx: fix role bits for GOOD_CRCVincent Palatin2017-03-082-37/+19
* pd: Add tcpc_select_rp_value to stub tcpm driverScott2017-03-021-1/+2
* driver: kionix: Forgive i2c read failures while the acc is resettingGwendal Grignou2017-03-011-5/+0
* driver: kionix: Increase init delay to 20msGwendal Grignou2017-03-011-1/+1
* driver: Add polling mode support to Si114x ALS sensorScott2017-02-202-0/+17
* anx74xx: Restore behaviour if CONFIG_USB_PD_TCPC_LOW_POWER is unsetNicolas Boichat2017-02-171-10/+8
* motion: Add opt3001 as a motion sensorGwendal Grignou2017-02-162-3/+252
* pdchipinfo: Add option to force renewalDaisuke Nojiri2017-02-143-6/+9
* pdchipinfo: Increase compatibility of fw_versionDaisuke Nojiri2017-02-142-11/+14
* lis2dh: code cleanupGwendal Grignou2017-02-134-75/+65
* ANX74xx: add TCPC low power mode for different DRP stateKevin K Wong2017-02-112-15/+62
* console: Add non-verbose print config optionShawn Nematbakhsh2017-02-118-17/+11
* Add host command to get PD chip informationDaisuke Nojiri2017-02-095-28/+110
* Snappy: Recondition USB3.0 RXDaisuke Nojiri2017-02-091-0/+2
* driver: accel: Add acc driver basics and FIFO for LIS2DH/LIS2DH12Mario Tesi2017-02-095-0/+884
* tcpm: it83xx: Add support for TYPEC_CC_OPENShawn Nematbakhsh2017-02-071-6/+27
* cleanup: Remove charge_state_v1Sam Hurst2017-02-061-1/+1
* charge_ramp: Specify port number in board_is_vbus_too_low()Shawn Nematbakhsh2017-02-022-13/+10
* BD9995X: Set VSYSREG_SET register as per Charger State MachineVijay Hiremath2017-02-012-54/+85
* bd9995x: more delay time between chg_en and vsys_setWonjoon Lee2017-01-281-11/+23
* servo_v4: pd: Added Device Test System supportScott2017-01-261-1/+1
* Reef: Reduce max battery charge voltage for 0.5% marginDaisuke Nojiri2017-01-251-4/+7
* isl9238: Add support for battery discharging BMON current monitorNicolas Boichat2017-01-242-32/+81
* driver: bmi160: Set odr to 0 at init.Gwendal Grignou2017-01-101-0/+6
* motion_sense: Add "spoof" modeAseda Aboagye2017-01-071-0/+4
* charger: isl923x: Add support for ISL9238Nicolas Boichat2017-01-054-300/+329
* driver: als: Add error code UNCHANGEDGwendal Grignou2017-01-051-1/+1
* smart_battery: Cleanup smart battery & SB users codeVijay Hiremath2017-01-021-27/+41
* driver: temp_sensor: Add support for TI TMP112 sensorMoritz Fischer2016-12-303-0/+112
* driver: Move sensor private struture definition to boards.Gwendal Grignou2016-12-283-10/+1
* tcpm: anx74xx: Remove auto-toggle supportShawn Nematbakhsh2016-12-202-18/+5
* tcpm: fusb302: Don't mistake meaningful packets for GOOD_CRCShawn Nematbakhsh2016-12-141-41/+75
* bmp280: handle divided by 0 caseli feng2016-12-141-2/+3
* driver: bmi160: Add temperature sensorGwendal Grignou2016-12-122-0/+19
* usb_pd_protocol: tcpm_get_message: Check return valueNicolas Boichat2016-12-083-11/+8
* tcpci_tcpm_get_message: TCPC_REG_RX_BYTE_CNT includes headerNicolas Boichat2016-12-081-1/+10
* BD9995X: Disable input current limitation for all types of chargersVijay Hiremath2016-12-082-2/+9
* tcpm: fusb302: Fix BIST modeShawn Nematbakhsh2016-12-011-1/+14
* tcpm: fusb302: Remove dead rev.A codeShawn Nematbakhsh2016-12-011-113/+3
* tcpm: fusb302: Always take hard reset actions when M_HARDSENT receivedShawn Nematbakhsh2016-12-011-10/+3
* reef: BD9995X: Suspend DC-DC converter when discharging on ACVijay Hiremath2016-11-281-2/+10
View Lorry Controller Status