| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update the BQ2589x charger driver to configure properly the boost
used as a VBUS 5V source.
Define the bits used for I2C registers configuration.
Return success in unused charger callbacks to avoid blocking the
charge state machine.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:38603
TEST=On Ryu P4 reworked with BQ25892, plug a C-A receptacle adapter and
see the 5V VBUS coming up, un-plug it and see VBUS going away,
try several PD/type-C charger and check the selected current limit.
Change-Id: I24b832b6d130ff6dfda1ce47f5e445d65279fa7d
Reviewed-on: https://chromium-review.googlesource.com/266063
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For the driver functions get_range and get_data_rate, each call would
end up executing an i2c transaction even if the value had not
changed. Therefore, I modified the lsm6ds0 driver to cache the output
data rate as well as the range. This prevents unecessary i2c
transactions from occuring.
BUG=chromium:476226
TEST=Flashed EC on samus and verified that the accelrange and accelrate
commands still worked and that the sensors were functional.
TEST=Verified Double Tap still worked.
TEST=make -j buildall tests
BRANCH=none
Change-Id: Ie432979266dc4e4892978005de5d1df62cc0654f
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/265933
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Driver for Texas Instrument bq25890/bq25892/bq25895 battery charger
chip.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:38603
TEST=On a modified board with BQ25892, charge a 1S battery and check ADC
values.
Change-Id: I536c6b58438464a63ad3d3536b9bb84ff35920e8
Reviewed-on: https://chromium-review.googlesource.com/263458
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Contrary to the BQ2751 and BQ27741 it is sharing code with, BQ27742 does
not have a "device name" register. So we need to skip the I2C reads else
the battery_device_name() function returns an I2C error and the charge
code retries until the end-of-time to read it hogging the CPU.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:38401
TEST=run on Ryu P4 and verify that we are no longer seeing 20ms of I2C
transactions every 100ms on the battery I2C bus.
Change-Id: I961af54017f661ee928058b346a42b7206ad8217
Reviewed-on: https://chromium-review.googlesource.com/262449
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
'ectool chargestate show' shows the wrong input current since
the function charger_get_input_current() uses REG8_TO_CURRENT.
BUG=None
TEST=Use 'ectool chargestate show' or UART command 'charger'
check the input current value.
BRANCH=None
Signed-off-by: james_chao <james_chao@asus.com>
Change-Id: I29229ea1ef22811035b500c7a33fedee6562db35
Reviewed-on: https://chromium-review.googlesource.com/259842
Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Divya Jyothi <divya.jyothi@intel.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Commit-Queue: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add support for bq24770 (smbus) in the bq24773 (i2c) driver.
BUG=None
TEST=Use the UART command "charger" and check the charger information.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ie5f5af60e93aa73d9ef68115af36a8d28f6d6c2b
Reviewed-on: https://chromium-review.googlesource.com/259870
Reviewed-by: BoChao Jhan <james_chao@asus.com>
Reviewed-by: Divya Jyothi <divya.jyothi@intel.com>
Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Tested-by: Divya Jyothi <divya.jyothi@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bits 1 and 3 of the control register are read 1, write 1, but RO
firmware may have zero'd these bits. Therefore, always set the bits
high, ignoring the read value.
TEST=Manual on Samus. Starting from .90 RO, flash new RW and verify
BC1.2 charger detection is working.
BUG=chrome-os-partner:37241
BRANCH=Samus
Change-Id: I2f71718f74e50fe9b664dbe3da1578ee4c995136
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/254880
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the USART and USB Stream drivers exposed in_stream
and out_stream interfaces, which don't allow for sharing their
queues easily. This change converts these drivers over to the
producer/consumer model and updates the two uses.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Verify that the discovery echo functionality is unchanged.
Change-Id: I29f043ab1712373f638e1621378df98647d736cf
Reviewed-on: https://chromium-review.googlesource.com/252820
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
REG_CONTROL has two sets of reserved bits:
- Bits 5 thru 7 are read x, write 0.
- Bits 1 and 3 have undocumented function and should not be changed from
read value.
BUG=chrome-os-partner:36360
TEST=Manual on Samus. Cold boot unit and insert 2.4A charger. Verify
that charger is correctly detected.
BRANCH=Samus
Change-Id: I240d352817910eda404b72be13e2c913a4b76079
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/246560
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Occasionally the charge circuit on samus gets wedged and will not
charge. This change detects when the charge circuit has failed
and automatically recovers from it. It uses the BQ PROCHOT warning
to detect the failure by setting PROCHOT to trigger when the BQ
thinks input current is higher than the input current limit. When
the failure is detected, the EC disables charging and tells PD MCU
to disable CHARGE_EN, then a couple seconds later, it re-enables
charging.
This CL also adds more communication between EC and PD for the EC
to be able to set the charge state for the PD. Valid charge states
are: No charging allowed, 5V charging only, and max charging. The
EC uses this as such:
- When the EC gets AC present interrupt, it sets off a deferred
function to change charge state to max charging after some delay
to give time for the charge circuit to settle down.
- When the EC gets AC disconnect interrupt, it disables charging
briefly, enables learn mode, and then sets 5V charging allowed.
This allows for the same starting conditions in the charge circuit
for every AC attach.
- When the EC detects a wedged charge circuit, it disables charging
and waits a few seconds before re-enabling 5V only charging.
Additionally, this change moves the charging cutoff in S3/S5/G3 when
the battery is full to the EC. With the added control for the EC
to set the PD charging state, it is more convenient for the EC to
manage cutting off charging when battery is full.
BUG=chrome-os-partner:36081
BRANCH=samus
TEST=test the basics:
- connect/disconnect zinger a bunch of times
- connect and disconnect two zingers in different order
- connect two zingers and charge override between the two
test the automatic charge wedge recover:
- wedge the charge circuit by setting charger voltage under battery
voltage: "charger voltage 7000"
- wait a few seconds for the system to recover and check it is charging
with "battery" command
test full battery charge cutoff:
- added console command to change battery soc in board/samus/extpower.c:
static int cmd_battfake(int argc, char **argv)
{
char *e;
battery_soc = strtoi(argv[1], &e, 10);
batt_soc_change();
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(battfake, cmd_battfake, "", "", NULL);
- in S0, tested "battfake 100" does not disable charging.
- in G3, tested "battfake 100" disables charging and "battfake 99"
re-enables charging.
- set "battfake 100" and tested transitioning to S0 enables charging and
transitioning to S5 disables charging.
- attached two chargers and used charge override to select active port.
then toggled "battfake 100" to "battfake 99" back and forth and verified
charge override port is still the same.
test third-party 12V charger:
- plug in a bunch of times and make sure we stay at 5V for 500ms and then
transition to 12V
test with no battery:
- tested five different units with no battery and just zinger. 3/5 boot,
while the other 2 don't. But, the 2 that don't boot without battery also
can't boot w/o battery when this CL is reverted, so I don't think this
change is causing the problem, I think there is an electrical limitation.
test with EVT zinger:
- EVT zingers (P2 - C2) negotiate very quickly after connection, which
can cause INA problems w/o this CL. Tested an EVT zinger with samus and
did a bunch of connections and disconnections and verified that we always
wait at 5V for 500ms and that we don't wedge the INA circuit on connect.
test backwards compatibility:
- test new PD with old EC and make sure we can charge with zinger.
(note that if the charge circuit wedges, we won't be able to unwedge it).
- test old PD with new EC and make sure we can charge with zinger.
Change-Id: I7703b7a2ab1209d7f559b265b03517e79c74b16a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245253
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
mcdp_info is a logging payload, so related structures need to be moved
to the public include file.
BUG=chrome-os-partner:35935
TEST=make buildall -j
BRANCH=Samus
Change-Id: Idb939db884821fa85faafbfe643e713f5bcdbc59
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/244780
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This allows us to charge at a faster rate.
BRANCH=Ryu
BUG=None
TEST=Charge Ryu P3 in S5 and check charging current.
Change-Id: If8fbaa42d34df45f3d4db35ba50031c511b0c7af
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/242666
Tested-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Signed-off-by: Todd Broch <tbroch@chromium.org>
BUG=chrome-os-partner:35935
TEST=manual
# With dingdong in C0 & hoho in C1
# Enter GFU mode for dingdong & hoho
ectool --name cros_pd pdsetmode 0 0x18d1 1 1
ectool --name cros_pd pdsetmode 1 0x18d1 1 1
# read logs
ectool --name cros_pd pdlog
2015-01-26 14:36:54.787 P0 SRC
2015-01-26 14:36:54.780 P1 SRC
2015-01-26 14:36:53.680 P0 DP mode enabled
2015-01-26 14:36:53.375 P1 HDMI Codec: family:000e chipid:0001 irom:1.0.0 fw:0.0.0
2015-01-26 14:36:53.771 P1 DP mode enabled
# remove hoho & plug in zinger instead
ectool --name cros_pd pdlog
2015-01-26 14:44:36.991 P1 SNK Charger Type-C 5153mV max 5000mV / 3000mA
2015-01-26 14:44:37.011 P1 SNK Charger PD 5021mV max 20000mV / 3000mA
2015-01-26 14:44:37.116 P1 SNK Charger PD 20211mV max 20000mV / 3000mA
Change-Id: I0289cfd1d43ef1a22123b437bc8df86920fbf1a7
Reviewed-on: https://chromium-review.googlesource.com/243375
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Turn off prochot warning on bq24773 by default because our
battery can always supply enough power for the whole system
so we don't need to throttle the CPU if the BQ senses too much
input current.
BUG=chrome-os-partner:34885
BRANCH=samus
TEST=force BQ into it's prochot condition on samus by setting
the charging voltage temporarily below the battery voltage, which
causes INA to turn off and the BQ to think IADP is > 4.1A. in
this condition PROCHOT is normally asserted and CPU slows down,
but with this patch PROCHOT is not asserted and the CPU does not
slow down.
Change-Id: I658dbe568b7bfe94944ef90d6d59656a0683c8a0
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/243231
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Several modifications to samus fast charging to fix bug where
charging circuit stops charging the battery.
- Fix bug: if we have a bad temperature reading, fast charging should
ignore it.
- Change the fast charging high temperature profile to set a charging
voltage equal to the maximum of 8.3V and the current battery voltage.
- Divide the normal temperature profile into two phases, low voltage
charging and high voltage charging. Once we transition to second
phase, don't allow it to go back to phase 1 unless AC is removed.
On samus, we have to make sure we never command the BQ to a charging
voltage that is below the present battery voltage or else the INA will
lose power and we will not be able to charge the battery until AC
is disconnected.
This also changes charge_state_v2 so that the fast charging profile
override is called even when AC is disconnected to avoid jumps in
temperature as seen by the fast charging code.
Also changes the voltage threshold for transitioning from phase 1 to
phase 2 of normal temp charging so that the transition is taken a little
earlier to match the desired profile slightly better.
BUG=chrome-os-partner:35491
BRANCH=samus
TEST=Added custom console command to be able to directly control the
battery temperature that charger_profile_override() uses:
static int command_chgtemp(int argc, char **argv)
{
char *e;
if (argc < 2)
return EC_ERROR_PARAM_COUNT;
chg_temp = strtoi(argv[1], &e, 10);
if (*e)
return EC_ERROR_PARAM1;
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(chgtemp, command_chgtemp,
"",
"",
NULL);
Using this command, I jumped back and forth between all three temperature
fast charging regions and made sure that (1) we never set a charging voltage
below the present battery voltage and (2) we never stop charging the battery.
I ran this test at low battery and high battery percentage and with low load
(G3) and high load (S0 with webgl aquarium).
Change-Id: I035603a4ab48a156ab43f8c93f21200c4b664aab
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/243143
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add battery cutoff to samus.
BUG=chrome-os-partner:35744
BRANCH=samus
TEST=tested "cutoff" console command cuts off battery
and "ectool batterycutoff" from host cuts off battery
Change-Id: I88194c9c601594dee144933cabef5b1dc536ab0d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/242830
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The battery driver is not reporting battery present state, and as a
result, is_present flag always remain NOT_SURE. Fix it.
BRANCH=Ryu
BUG=None
TEST=On Ryu, 'chgstate' and see 'is_present = YES'.
Change-Id: I84bedc390158797bf1e67e612d0bb3f526292dfa
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/242970
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Design capacity and Design Energy need to be multiplied by the scaling factor.
BUG=None
TEST=Manual test with hadoken without charging enabled. Observed the battery
level decreasing.
BRANCH=NONE
Change-Id: Icb5f74766c2416128277df4fe1bb00fc7307f5e5
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/242890
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Lock access to the MUX GPIO to prevent other tasks from toggling away
from our active chip while in use.
BUG=chrome-os-partner:35567
TEST=Manual on samus_pd. Boot system, verify that no "write failed"
print is seen. Also verify that charger detection functions as expected.
BRANCH=Samus
Change-Id: Ica02b8fbd8f9ee04f6389ce0b0e5bd58104ff698
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/242125
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds a sensor-specific attentuation factor, which will be
applied to the ALS raw sensor readings on the EC. This is to
account for the attenutation due to glass, tinting, etc.
BUG=chrome-os-partner:34590
BRANCH=ToT,Samus
TEST=manual
In a root shell, run this:
cd /sys/bus/acpi/drivers/acpi_als/ACPI0008:00/iio:device1
while true; do cat in_illuminance_raw; sleep 1 ;done
Shine a flashlight on the ALS. Note that the readings are 5X
higher than they were before this CL.
Change-Id: I2a53872ecb5fab62e5f443d43588a26d3d7e697f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241191
Reviewed-by: Bryan Freed <bfreed@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PI3USB9281A is compatible with our existing driver but has a different
device ID.
BUG=chrome-os-partner:35567
TEST=Manual on samus_pd. Verify that "invalid ID 0x18" prints are not
seen on console.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I275ed50fcbcb3c2e385292408be6de51055903fb
Reviewed-on: https://chromium-review.googlesource.com/241764
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
define CONFIG_CMD_BATDEBUG to enable console commands.
If the battery is larger than 6Ah or smaller than 150mAh, scale the parameters
transparently to the user using macros.
BUG=chrome-os-partner:34477
BRANCH=none
TEST=Custom console commands for the fuel gauge
I also used a Logic16 from Saleae and the fuel gauge on hadoken.
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Change-Id: I959d51c3188336e4ad0983528ad7e53a2955a764
Reviewed-on: https://chromium-review.googlesource.com/234285
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Myles Watson <mylesgw@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix accelerometer bug in which, if there is no new data from
the lsm6ds0 accel, it will use the old ajusted xyz instead of
the old raw xyz.
BUG=chrome-os-partner:34952
BRANCH=samus
TEST=add printf to case where it uses old data and sample faster
then ODR to read wrong data.
Change-Id: If0a6bbdec71d84567eae107aca6f1d0ab754919a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/237664
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add initial serial driver for mdcp2850 dp->hdmi converter. Driver
implements 'get information' (cmd:0x40) to provide rudimentary method
to test mcdp for functionality and assert GPIO if successful.
Future CLs may expose more serial functionality if necessary.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34122
TEST=manual, when compiles with #define MCDP_DEBUG see successful
serial communication and result from get info.
buf:[00]0x04 [01]0x40 [02]0x00 [03]0xbc
...
buf:[00]0x0f [01]0x40 [02]0x00 [03]0x0e
[04]0x00 [05]0x01 [06]0x01 [07]0x00
[08]0x00 [09]0x00 [10]0x00 [11]0x00
[12]0x00 [13]0x00
family:000e chipid:0001 irom:1.0.0 fw:0.0.0
Change-Id: I35f9d9b0437633d1bd6a6c9fa14413bedb12f5c2
Reviewed-on: https://chromium-review.googlesource.com/235930
Trybot-Ready: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Set charge state machine voltage to just above the battery voltage
when AC is disconnected. Also send new current before sending new
voltage to charger when there is a change. These changes reduce
input current spikes caused by current inrush into the battery and
thereby decrease chance of overcurrenting power supply on connect.
BUG=chrome-os-partner:33862
BRANCH=samus
TEST=load onto samus instrumented with input current probe. when
AC is attached note that initial current spike is much lower with
this change.
Change-Id: I7760cd2b709c6b3536cf2a9449bb1f46800ce10a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/237245
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
According to specification, a DCP port is only required to provide 500mA
@ 4.75V, though actual supply limit can vary upward significantly. Set
the current limit on DCP ports to 500mA to reflect this reality.
BUG=chrome-os-partner:32003
TEST=None
BRANCH=Samus
Change-Id: I46e25b44baaa41ddf173880e52d7485d952ebf23
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236772
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Samus USB ports can't actually act as UFPs, so open switches when in
UFP mode.
BUG=chrome-os-partner:32003
TEST=Manual on Samus. Connect two Samus units, run `pd 1 swap data`,
verify that switches are opened on switch to UFP. Unplug samus and
connect a USB 2.0 device instead, verify that ports are again closed.
BRANCH=samus
Change-Id: I9e1ca58089caf29e419698c8426bf8b72500833a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233711
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MOTIONSENSE_CMD_DUMP is deprecated, replaced with MOTIONSENSE_CMD_GET_DATA
Also use vector_3_t instead of x,y,z
ectool motionsense commands only work with newer firmware, to
handle a dynamic number of sensors.
- The host sends the number of sensor it has allocated space for.
- If 0, the EC just sends the number of sensors available
- Otherwise returns sensor information up to the limit imposed by the host.
Remove MOTIONSENSE_GET_STATUS: not needed. It is only useful for LPC,
to guarantee atomicity of the data.
Remove MOTIONSENSE_GET_DATA: not needed since we increase the version
number of MOTIONSENSE command.
BUG=chrome-os-partner:31071,chromium:430792
BRANCH=ToT
TEST=Compile. On a firmware that support the new command:
/usr/sbin/ectool --name=cros_sh motionsense
Motion sensing active
Sensor 0: 92 15 1030
Sensor 1: -94 -63 718
/usr/sbin/ectool --name=cros_sh motionsense active
0
On a machine with older firmware (samus), check these
functions are not working anymore.
Change-Id: I64b62afff96670fb93457760d43d4e64e26e029f
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226880
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Get type-c port power info including power role, charger type,
and charging info. Also added host command to get number of type-c
ports.
Also adds new charging suppliers for pericom identified chargers
including DCP, CDP, SDP, proprietary, and other chargers. Priority
of these for charging is set in samus board file.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=run 'ectool --name=cros_pd usbpdpower' and verify correct
status with minimuffin, zinger, and type-C to type-A adapter.
Change-Id: I1dabbe7de4185a23df5684a5ea9a2d944f1f6ff5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223523
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split motion_sense.c.
Translate the accel data in the Android coordinate right away.
BUG=chrome-os-partner:32002
BRANCH=ToT
TEST=On samus, check lid angle are still correct.
Change-Id: If743e25245dc1ce4cdacb8a4d5af22616c4a79e4
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225486
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original algorithm is given in the TMP006 User's Guide
(SBOU107.pdf). The algorithm we previously implemented is that,
plus some additional and completely undocumented massaging of the
Tdie and Vobj registers. The original meaning of that hack is now
lost in the mists of time, thanks to our email retention policy.
This CL introduces a new algorithm variant, but at least this
time the details are in the bug report. It's essentially the same
as the User's Guide algorithm, except that we apply one-stage FIR
filters to the Tdie input and the Tobj output.
There are five new parameters: d0, d1, ds, e0, e1. Refer to
tmp006_read_object_temp_k() in ec/driver/temp_sensor/tmp006.c to
see how these new parameters are applied.
CAUTION: The tmp006 sensor algorithm is mostly math and magic
numbers. The spreadsheet attached to the bug report has six
sheets with wildly varying values for those parameters. Since the
correct parameter values haven't yet been determined for Samus,
all I can be sure of with this CL is that it seems to work and
isn't any worse than the old one.
Oh, and note that the EC's 't6cal' console command has been
disabled until/unless we add support for floating point IO. Use
ectool from the host to get and set the params instead.
BUG=chrome-os-partner:32260
BRANCH=ToT,Samus
TEST=manual
After booting, look at the sensor values using ectool:
localhost ~ # ectool temps all
0: 312
1: 314
2: 313
Sensor 3 not calibrated
4: 311
Sensor 5 not calibrated
6: 305
Sensor 7 not calibrated
8: 306
Sensor 9 not calibrated
10: 307
Sensor 11 not calibrated
12: 312
Sensor 13 not calibrated
localhost ~ #
localhost ~ # ectool tempsinfo all
0: 0 PECI
1: 1 ECInternal
2: 1 I2C-Charger-Die
3: 2 I2C-Charger-Object
4: 1 I2C-CPU-Die
5: 2 I2C-CPU-Object
6: 1 I2C-Left C-Die
7: 2 I2C-Left C-Object
8: 1 I2C-Right C-Die
9: 2 I2C-Right C-Object
10: 1 I2C-Right D-Die
11: 2 I2C-Right D-Object
12: 1 I2C-Left D-Die
13: 2 I2C-Left D-Object
EC result 2 (ERROR)
...
localhost ~ #
There are six tmp006 object temps that need calibrating. The
index used for the calibration is for the tmp006 objects, not the
3,5,7,.. numbers reported for all temp sensors. See the current
values with tmp006cal:
localhost ~ # /tmp/ectool tmp006cal 5
algorithm: 1
params:
s0 0.000000e+00
a1 1.750000e-03
a2 -1.678000e-05
b0 -2.940000e-05
b1 -5.700000e-07
b2 4.630000e-09
c2 1.340000e+01
d0 2.000000e-01
d1 8.000000e-01
ds 1.480000e-04
e0 1.000000e-01
e1 9.000000e-01
localhost ~ #
If the s0 param is zero, this sensor is uncalibrated. The params
are entered in the order in which they're displayed You can
change any or all of the parameters. Skip the ones you don't want
to update by specifying '-' for its position. (Note: throw in an
extra '--' first so that ectool doesn't think that negative
numbers are command options).
For example, to change s0 and b0:
localhost ~ # ectool -- tmp006cal 5 1.0 - - -3.0
localhost ~ #
localhost ~ # ectool tmp006cal 5
algorithm: 1
params:
s0 1.000000e+00
a1 1.750000e-03
a2 -1.678000e-05
b0 -3.000000e+00
b1 -5.700000e-07
b2 4.630000e-09
c2 1.340000e+01
d0 2.000000e-01
d1 8.000000e-01
ds 1.480000e-04
e0 1.000000e-01
e1 9.000000e-01
localhost ~ #
Now sensor 13 (tmp006 object index 5) is calibrated:
localhost ~ # ectool temps all
0: 310
1: 315
2: 313
Sensor 3 not calibrated
4: 310
Sensor 5 not calibrated
6: 305
Sensor 7 not calibrated
8: 307
Sensor 9 not calibrated
10: 307
Sensor 11 not calibrated
12: 312
13: 313
Change-Id: I61b5da486f5e053a028c533ca9e00b9a82a91615
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224409
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The register format of INA231 and INA219 are very much alike. In our
use case, we only need to use different coversion coefficient.
BRANCH=None
BUG=chrome-os-partner:32764
TEST='ina 0' on Plankton V2.
TEST=Build twinkie.
Change-Id: I9c8e21e30ed844566793dcc1221f865400c3d90d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223370
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Decode Pericom registers to current limits.
BUG=chrome-os-partner:32003
TEST=Manual on samus_pd. Insert 1A Apple charger, verify current limit
is correctly detected as 1A.
BRANCH=samus
Change-Id: I310d9f22cef80e97c1734e6a56f0034ebe01df31
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222638
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When charger is initialized disable the LEARN option i.e. reenable
charging on AC power
BUG=chrome-os-partner:32320
TEST=set DUT to discharge on AC and then reflash EC. Ensure that
charging begins again.
BRANCH=none
Change-Id: I3e83db27ab49548d5491548fa624899865c11bfb
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222644
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Design Goals:
1. Every time the AP boots, the same default sensor settings are configured.
2. If the AP goes to suspend (S3) and wakes back up (S0),
then the AP sensor settings will be restored.
3. In S3 and in S5, only sample specific sensors that are needed.
BUG=chrome-os-partner:32368
BRANCH=ToT
TEST=Verified on Samus.
Verified suspend and resume logic with EC console messages.
- Test Case0: close lid & open lid
- Test Case1: powerd_dbus_suspend
Change-Id: I553c53e63ecfcb39d5e649a7189aa6ea02589471
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220371
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This command resets the USB hub through the IO expander.
BUG=None
TEST=Reset the hub on Plankton.
BRANCH=None
Change-Id: Ia77a1e326adc6aba65438534158a4c461479727a
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/218758
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable fast charging with profile designed for ATL cells
that will be used in EVT.
BUG=chrome-os-partner:23776
BRANCH=none
TEST=Took detailed charging/discharging data and verified
that the actual profile matches the desired profile and that
the fast charging profile is actually faster than the
standard. See bug report for more info and data collected.
Change-Id: Ic11ab89e48afb73987b8013abf8b0564e1138156
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212980
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reuses most of the existing BQ27541 driver, but changed necessary
parts to make it work.
BUG=none
TEST=Boot on Ryu. See battery charging.
BRANCH=factory-ryu-6212.B
Change-Id: I3a7325a821c81f84396bcc328036b6a5e7749a2e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/217198
Reviewed-by: Alec Berg <alecaberg@chromium.org>
(cherry picked from commit f44593e20bf61a2243d7baaae901c912ca798d75)
Reviewed-on: https://chromium-review.googlesource.com/218413
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ref: Common Smart Battery System Inferface Specification v8.0.
Ref: http://smbus.org/specs/smbus20.pdf
- Enable smbus read/write APIs with compile options
BUG=chrome-os-partner:30930
BRANCH=ToT,glimmer
TEST=Verified with LGC & Simplo firmware update.
Change-Id: I3f4bb23147f22365adb378c2e39c40d5ba100889
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209906
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ref: Common Smart Battery System Inferface Specification v8.0.
- Added 2 new AP->EC Command APIs
EC_CMD_SB_FW_UPDATE, EC_CMD_ENTERING_MODE
- Implemented common smart battery update drivers.
BUG=chrome-os-partner:24741
CQ-DEPEND=CL:210032
CQ-DEPEND=CL:210033
CQ-DEPEND=CL:215720
BRANCH=ToT,glimmer
TEST=Verified on LGC & Simplo smart battery
Change-Id: Ice6e60b1b04762217ae7613356d6925777c06abf
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/205323
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Removed duplicate (similar) i2c_read_string functions.
- Kept one generic (weak) copy in common/i2c.c.
- TBD: Need support start/stop flags for STM32 family devices
BUG=chrome-os-partner:23569
BRANCH=ToT
TEST=Verified with smart battery firmware update application on glimmer.
Passed LGC & Simplo Battery.
Change-Id: I6d9446c60b6a36aef9a6179242c081084199c8e2
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209866
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changed motion_sense task to assume sensors are unpowered in G3
and re-initialize sensors every time coming out of G3.
Added EC command line test utils as well.
Fixed some bug during unit tests.
BUG=chrome-os-partner:27313,27320
BRANCH=ToT
TEST=Verified on Samus.
Tested with accel EC CLIs
accelread, accelrange, accelrate, accelres
Tested accelcalib, a ACCEL calibration util, and it succeeded.
Tested sysfs interface:
cd /sys/bus/iio/devices/iio:device1
cat in_accel_*_gyro_raw
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Change-Id: I5752b00c03e1942c790ea4f28610fda83fa2dcbc
Reviewed-on: https://chromium-review.googlesource.com/211484
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously our accel / gyro drivers assumed that we had exactly two of
each identical part in the system. Some systems may have different
configurations, so allow this to be specified at the board-level.
Note that our motion_sense algorithm currently assumes that we have one
accelerometer in the lid and one in the base -- we'll need to fix that
in another CL.
BUG=chrome-os-partner:27320
TEST=Compile-only. Tested in future Samus commit.
BRANCH=None.
Change-Id: I1fae1f6c578fedebe78b473a5d66a5794ccaae00
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212321
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
During flash erase operation, read is stalled and thus interrupt might
be serviced later. This can cause PD communication to fail and thus the
board reboots if there is no battery. Print a warning message in this
case.
BUG=chrome-os-partner:31127,chrome-os-partner:31207,chrome-os-partner:31362
TEST=Boot Ryu, on software sync, see warning message before board
reboots.
BRANCH=None
Change-Id: If327a4f533fd2dfa83f92531148bd52ace927e03
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212264
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BRANCH=none
BUG=none
TEST=verify that usb switch funcitons
Change-Id: Ie897a2ae94042abefbb349d30dfa183caaec9ed0
Signed-off-by: Dominic Chen <ddchen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209846
Reviewed-by: Vic Yang <victoryang@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently charge state machine resets input current limit to default
every time AC is connected. Problem is by the time charge state machine
gets around to setting input current, it could have already been set
by successful PD negotiation, and this ends up overriding that value.
This fix has the state machine store desired input current limit, as
determined from PD negotation or any other place, and send last desired
input current limit on AC connect.
BUG=chrome-os-partner:24461
BRANCH=none
TEST=load on samus, test toggling between "pd 0 dev 5" and "pd 0 dev 20",
and test plugging and unplugging zinger numerous times, and verify charger
command always gives the expected input current limit based on PD
negotiation.
Change-Id: I18d8acc9e2085739e783c9c70c682d46bcce7fdb
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211639
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Set input current limit based on the max current from the
PD negotiation. For samus, this information is passed to
the EC as a host command. For ryu, the max current is set
directly following a negotiation.
CONFIG_CHARGER_INPUT_CURRENT is now just the default limit,
but after a successful PD negotiation, the limit can be
raised.
Note, for now the input current limit for samus is set to
2/3 of the value negotiated for. This is due to hardware
problems measuring input current on p2b boards.
BUG=chrome-os-partner:28532, chrome-os-partner:24461
BRANCH=none
TEST=tested on a samus. Verified input current limit using
"charger" console command from EC. Input current limit
after a reboot is 512. When zinger is plugged in, it jumps
to the appropriate value (currently 1280mA), and when
the negotiation is changed using the "pd 0 dev 5" command
on the PD console, the input current limit is adjusted to
match (2000mA).
Change-Id: Iab9186a0f9814655e3240217a9baf4a38f15f84d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211023
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update the code to be compatible with charge v2 expectations :
never return EC_ERROR_UNIMPLEMENTED for battery information else the
charge code continuously tries to read them again.
Fix the State Of Charge reading : on BQ27741 the gas gauge gets confused
if we do a 16-bit I2C read while a 8-bit read works perfectly.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=run a Ryu connected to a Kirby battery and check the output of the
"battery" command.
Change-Id: Ic1d6128dc02efa47662fa5ca5b9e5de62420ebe8
Reviewed-on: https://chromium-review.googlesource.com/207273
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Like Samus, the battery can be placed into a disconnect state. This CL
implements the necessary function to determine if it is so and kick it
out of this state when possible.
BUG=chrome-os-partner:30633
TEST=Put a battery in this state. Plug in AC. Verify the battery is
revived.
BRANCH=None
Change-Id: I074a72a2efe3844cbdfb0eda16a25fd8d1755a9b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209634
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Samus battery can be placed into a disconnect state by asserting a
disconnect input signal. In this state, the battery will not function
until a charging current is applied. This patch adds detection of the
disconnect state. If a battery in disconnect state is found, a current
is force-applied to the battery to kick it out of disconnect.
BRANCH=None
TEST=Manual on Samus.
1. Put battery into disconnect state
2. Pull AC, then reattach AC
3. Verify "found battery in disconnect state" is seen on the
EC console.
4. Pull AC and verify that EC console is still accessable
Also verify that battery gets out of reset state:
1. Pull AC
2. Issue "i2cxfer w16 0 0x16 0x0 0x12" command on EC console
3. Re-attach AC
4. Pull AC and verify that EC console is still accessable
BUG=chrome-os-partner:29465
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ib4268887fb483094ac4e641749200268160d3014
Reviewed-on: https://chromium-review.googlesource.com/209013
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
|