summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* driver: bmi160: Check enable_fifo flags before processing FIFOGwendal Grignou2019-05-071-13/+13
* ampton: tune the dp mux to improve external monitor compatibilityJames_Chao2019-04-251-0/+1
* TCPC: Set charger vbus during initDiana Z2019-04-161-0/+7
* anx7447.c: change VBUS present detection interfaceXin Ji2019-03-291-6/+5
* Battery: add support battery-cutoff SMBus block write functionmatt_wang2019-02-271-0/+15
* temp_sensor: Guard thermistor readings by their power rail enable gpioScott Collyer2019-02-261-6/+33
* driver/lsm6dsm: Fix issue while setting Magnetometer ODRKarthikeyan Ramasubramanian2019-02-131-11/+4
* driver: bmi160: for reference, add for lis2mdl supportGwendal Grignou2019-02-111-0/+5
* driver: lsm6dsm: Integrate LIS2MDL behind LSM6DSMGwendal Grignou2019-02-117-224/+343
* driver: lsm6dsm: Clean register definitionGwendal Grignou2019-02-111-53/+83
* config: Add magnetometer definitionsGwendal Grignou2019-02-111-1/+1
* ps8xxx: put the PS8751's power role to sink stateJames_Chao2019-02-011-1/+17
* driver: lsm6dsm: add reboot at init timeDevin Lu2019-01-252-0/+51
* Ampton: Set the PS8751 to source mode before enter low power modeJames_Chao2019-01-244-1/+18
* tcpm/it83xx.c: don't reload cc parameter settings for DxRuibin Chang2019-01-221-0/+2
* driver/ppc/nx20p348.c: Handle overcurrent eventKarthikeyan Ramasubramanian2019-01-221-5/+2
* USB PD: PPC: Add overcurrent handling.Aseda Aboagye2019-01-221-2/+3
* LSM6: Throw out junk data after ODR changesDiana Z2019-01-192-15/+34
* LSM6: Follow ODR change procedure from application notesDiana Z2019-01-193-31/+52
* drvier: lsm6dsm: Populate Gyroscope scale properlyGwendal Grignou2019-01-192-36/+22
* LSM6: Correct timestamp reporting and FIFO lengthDiana Z2019-01-182-8/+12
* driver/sensorhub_lsm6dsm: fix sensorhub mode slv0 addressDevin Lu2019-01-071-1/+1
* tcpc: remove reset check in alert handlerJett Rink2019-01-021-4/+12
* tcpc: wait for TCPC wake up upon first accessJett Rink2018-12-181-52/+49
* bmi160: exit IRQ loop if error during reg readJett Rink2018-12-181-2/+4
* bmi160: do not overrun the amount of data read from the BMI FIFOEnrico Granata2018-12-181-8/+11
* bmi160: Keep timestamp and FIFO synchronizedEnrico Granata2018-12-181-8/+2
* it83xx/intc:add type-c plug in interruptRuibin Chang2018-12-142-0/+21
* sensor: Adjust max_frequency based on EC performanceGwendal Grignou2018-11-3012-9/+29
* it83xx/intc:message id of pd packet repeatRuibin Chang2018-11-302-0/+13
* driver/anx7447: Modify Vconn SW protection time of inrush current and power S...xiong.huang2018-11-302-1/+20
* touchpad_st: do not generate 0 finger hid eventWei-Han Chen2018-11-191-1/+3
* kukui: Fix shipping mode VSYS leakage.Yilun Lin2018-11-194-4/+89
* ppc/nx20: add more fault condition printsJett Rink2018-11-161-2/+11
* Battery: Use host full capacity to compute display percentageDaisuke Nojiri2018-11-161-0/+3
* atlas: clean up ROP PMIC registersCaveh Jalali2018-11-151-0/+6
* SN5S330: treat interrupts as level-sensitiveDiana Z2018-11-131-22/+41
* touchpad_st: ignore error 0x2AWei-Han Chen2018-11-131-1/+1
* touchpad_st: remove beacon count logsWei-Han Chen2018-11-081-0/+3
* touchpad_st: don't halt on error 0x24Wei-Han Chen2018-11-081-1/+2
* Battery: Compensate remaining charge to match full capacityDaisuke Nojiri2018-11-081-0/+2
* usb_mux: Clear HPD IRQ if hpd_update() is a virtual driverWai-Hong Tam2018-11-071-1/+1
* anx7447:Configure the MUX correctly at initSanna Parmar2018-11-051-5/+7
* tcpm/mt6370: Support low power mode.Yilun Lin2018-10-291-0/+19
* Octopus: Vbus gone from USB-C port after cold reboot with USB-A driveDiana Z2018-10-251-8/+13
* ppc: syv682x: Add trigger for BC 1.2 when turning src path on/offScott Collyer2018-10-241-1/+9
* driver/touchpad_st: Ignore st_tp_reset return valueNicolas Boichat2018-10-241-2/+5
* ppc: syv682x: Make source disable dependent on VBUS presenceScott Collyer2018-10-231-1/+7
* tcpm: cache the firmware version for anx74xx and ps8xxx chips.Paul Moy2018-10-232-18/+14
* drivers/accelgyro_lsm6dsm: Fix the FIFO_NUM_DEV configurationKarthikeyan Ramasubramanian2018-10-231-0/+2
View Lorry Controller Status