| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
suzy-qable advertises 1.5A, but its actual capability depends on the
host USB port it is attached to. Since suzy-qable is ubiquitous and
other DTS sources may behave in the same way, ramp the input current
limit in order to find a reasonable maximum.
BUG=chromium:770296
BRANCH=None
TEST=Attach suzy-qable to kevin and reef, verify that neither OCs and EC
console via cr50 is available on reef. Also verify donette chargers
kevin at 3A and does not ramp.
Change-Id: Idd0683ede3a44111a01da6b4faab52f388ee82fd
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/693295
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The decision on whether to ramp (and how high) depends on the quirks of
charger identification, so move the decision out of board, into the
drivers that implement usb_charger.
Also, rename CONFIG_CHARGE_RAMP to CONFIG_CHARGE_RAMP_SW, to better
contrast with the existing CONFIG_CHARGE_RAMP_HW.
BUG=None
TEST=Manual on kevin, verify ramp occurs when port plugged into Z840
workstation.
BRANCH=None
Change-Id: I5b395274133837a18a4f4ac34b59b623287be175
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/702681
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tasks are defined inconsistently across the code base.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
BRANCH=none
TEST=make buildall -j, also verify kevin boots to OS
BUG=none
Change-Id: I19a076395a9a8ee1e457e67a89d80d2f70277c97
Reviewed-on: https://chromium-review.googlesource.com/602739
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the charge ramp task starts, it starts up in the DISCONNECTED
state. From this state, it's possible to set the input current limit to
0 mA. However, upon task start, we shouldn't take any action until we
have valid values from a new charge supplier or a supplier leaving.
This commit changes the charge ramp task to not touch the input current
limit until the charge ramp state changes or the desired input current
changes at least once.
BUG=b:36468002
BRANCH=gru,master
TEST=Flash kevin EC RW or build AP FW that contains the fix that will by
sync'd by EC SW sync. Make sure WP is asserted to prevent PD
communications in RO. Unplug battery. Plug in AC, verify that system
can boot up to UI on AC alone.
TEST=make -j buildall
Change-Id: I351917bce7902c49d1bb842a0cc83dd161d75b6f
Reviewed-on: https://chromium-review.googlesource.com/461382
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/463927
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
charge_ramp needs to make a decision based upon the VBUS level on one
specific port - the port that is ramping. The VBUS level on any other
charge ports (if present) is not relevant.
BUG=chrome-os-partner:54099
BRANCH=reef, gru
TEST=With subsequent patches, verify charge_ramp success with a variety
of BC1.2 chargers.
Change-Id: Ie0a51a577e2b7491222560cd08dd5321ff3b7975
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/435561
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
From the USBC spec 1.2 "Table 4-14 Precedence of power source usage"
USB Type-C 3.0 A & 1.5 A takes precedence over BC1.2. Hence reverting
this patch.
This reverts commit 6a7e4a7b353c53d33d44662c71763490ffd1fdc4.
BUG=chrome-os-partner:61420
BRANCH=none
TEST=make buildall -j
Change-Id: I2ed3f767973ff9c47fa7d2a2cca1aca15d13aa65
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/430152
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A valid charge port is always detected as VBUS supplier type, 'USB charger'
can detect the same port as BC1.2 DCP supplier type & also 'TCPC' can
detect the same port as TYPEC supplier type. Thus a valid port is detected
as 2 or 3 supplier types. Depending on the supplier's priority and the
power that the supplier can provide, charge manager choses the charge
supplier type of the port.
If the USB charger detected supplier is BC1.2 DCP and the TCPC detected
supplier is TYPEC then the supplier can provide stable current from TYPEC
supplier's advertised current hence start ramping from TYPEC supplier's
advertised current.
BUG=chrome-os-partner:61420
BRANCH=none
TEST=Manually tested on reef. Donette bottom port can switch
from 1.5A to 3A upon high load.
Change-Id: I871eca3ae4041f00bb3fd50e6aa939643f30a1f2
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/427961
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If VBUS is lost and then quickly recovers, we may detect the re-presence
of the charger before charge_ramp has been informed about the loss. In
this case, charge manager's supplier registration time will precede our
ACTIVE_OC_INFO timestamp. Fix our timestamp comparison to correctly
detect OC in this case.
In addition, correctly mark all OC events stale once we have encountered
a disconnect / reconnect that we determine not to be related to OC.
BUG=chrome-os-partner:56367
TEST=Manual on reef, verify Motorola 800mA DCP charger settles at ~800mA
after OC.
BRANCH=reef
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I3fdfd3929d07c60b82655999dd5aa731c1c7bc9b
Reviewed-on: https://chromium-review.googlesource.com/419775
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 19ba4a053027486ca415c4d703944b38e3c5e652)
Reviewed-on: https://chromium-review.googlesource.com/421208
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some chargers lose VBUS even when ramp is stable and we re-ramp for
those chargers. It continues in loop. To avoid this issue, reduce
the max input current limit if VBUS drops on stable ramp.
BUG=chrome-os-partner:60544
BRANCH=none
TEST=Tested on Reef. Ramp settles to lower current and multiple
re-ramp is not observed.
Change-Id: I6c9ce4720d01b9e8e3215e8122f798076e516c19
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/416349
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Rachel Nancollas <rachelsn@google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If battery is not present, input current is set to PD_MAX_CURRENT_MA.
If the input power set is greater than the maximum allowed system power,
system might get damaged. Hence, limit the input current to meet maximum
allowed input system power.
BUG=chrome-os-partner:58498
BRANCH=none
TEST=Manually tested on Reef. Removed the battery & using 'charger'
console command observed the following.
With Zinger charger at 20V - Input current is set to 2.25A
With Type-C & other chargers - Input current is set to 3A
Change-Id: Ife8686f322e095aa74b740a7c469bfe87107fb9a
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/397865
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
charge_manager may request a charge current limit less than the
capability of the supply in certain cases (eg. during PD voltage
transition, to make an effort to comply with reduced load spec).
Depending on the battery / system state, setting a reduced charge
current limit may result in brownout.
Pass the uncapped / max negotiated current to board_set_charge_limit()
so that boards may use it instead of the requested limit in such
circumstances.
BUG=chrome-os-partner:56139
BRANCH=gru
TEST=Manual on kevin with subsequent commit, boot system with zinger +
low-charge battery, verify devices powers up to OS without brownout.
Change-Id: I2b8e0d44edcf57ffe4ee0fdec1a1ed35c6becbbd
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/383732
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=none
BRANCH=none
TEST=Manually tested on Amenia.
Connected Zinger, Type-C, DCP & CDP chargers. Device can negotiate
to desired current & voltage and the battery can charge.
USB2.0 sync device is detected by Kernel.
Change-Id: I58cb69289eef9a966e06bef8fe31d35beaec5e27
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/341030
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the task responsible for detection of USB chargers to common code
to reduce code duplication.
BUG=chrome-os-partner:40920
TEST=Manual on samus_pd. Plug USB charger, verify detection is correct
on both charge ports.
BRANCH=None
Change-Id: I362f8b5b51741509e459c66928131f1f6d2a3b1d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276210
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move parts of usb_pd_config.h that are not part of the phy layer
out of usb_pd_config.h and into board.h. This cleans up the
division between the TCPC and TCPM as only the TCPC needs to
use usb_pd_config.h.
Also cleans up the use of the CC detection voltage thresholds
by creating standard macros to use based on Rp strength for the
board.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I946cceb38bea8233095b8a4b287102bb8a3a296d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270337
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix flaky charge_ramp test. The test often delays CHARGE_DETECT_DELAY
after a new charger has been plugged in. But, that is the same delay
the charge_ramp module uses before starting to ramp. This creates a
race condition where sometimes the test resumes before the ramp up
starts and sometimes the test resumes after the ramp up starts. This
change fixes the problem by modifying the test to delay by 100ms
less than the charge_ramp module.
BUG=chromium:483543
BRANCH=none
TEST=run charge_ramp test 10 times w/o this CL and see failure 4
times. run test 20 times with this CL and observe 0 failures.
Change-Id: I5f7a6a05f9293d3dd7db5517a9df7caec95c58ea
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/268798
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change the EC_CMD_USB_PD_POWER_INFO host command to report the input
current limit and the max current theoretically possible given the
charger. The input current limit field is useful for logging purposes
and the max current field is useful to give to powerd to determine
if we have a low power charger connected.
The max current is determined by checking if the charge supplier is
allowed to ramp. If the charge supplier is allowed to ramp and has
not completed ramping yet, then max current is the max current that
we are allowed to ramp up to. Once the ramp has completed, then max
current is the stable charging current. If the charge supplier is not
allowed to ramp, then max current is simply the max current as
registered with charge_manager. The point here is to keep the max as
high as possible until we know for sure it is lower to avoid showing
the user the low power notification until we know for sure.
This CL also adds a new charger type, USB_CHG_TYPE_UNKNOWN. For a short
period after a charger is plugged in, the supplier type may change and
PD negotiation is still in process, and therefore we tell the host we
have an unknown charger type. This allows powerd to show the charging
icon, but delay determining if this is a low power charger until we
know for sure.
BUG=chrome-os-partner:38548
BRANCH=samus
TEST=tested with zinger, a DCP, an SDP, and a proprietary charger.
tested that low power notification never pops up with zinger, even
if you purposely wedge charge circuit with "charger voltage 7000" on
EC console. tested that the other chargers all pop up low power
notification once the supplier changes from UNKNOWN to the real
supplier. used "ectool --name=cros_pd usbpdpower" to check current
values.
Change-Id: If8a9a1799504cc2a13238f4e6ec917d25d972b22
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/265066
Reviewed-by: Sameer Nanda <snanda@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Modify charge ramp so that when it ramps it ramps from 500mA and
up to the maximum allowed by that supplier. Also modify Samus and
Ryu to use charge ramping for CDP and proprietary chargers due
to the possibility that they may not be able to supply the amount
that is supposed to be guaranteed by their advertisement.
BUG=chrome-os-partner:37549
BRANCH=samus
TEST=test on a proprietary charger, make sure we can ramp. test
a DCP and make sure we also ramp as before.
Change-Id: I08fd43c8f0b21aa54d114fbe5a1296c9556357e4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/256972
Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refactoring effort to unify the set of PD intialization tasks that
need to occur. Those areas include:
1. host mode as it relates to power & pull-ups/downs
2. PD tx init
3. PD mux settings
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:36481
TEST=manual,
1. compiles and functions on samus_pd
2. If sysjump w/ dongle connected than alternate mode re-entered
properly including muxing and HPD
Change-Id: I47f32acaeccbd7745e1e01a8b085b1804c4c5000
Reviewed-on: https://chromium-review.googlesource.com/249273
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
|
|
Add new charge_ramp module which works with charge_manager to
slowly increase input current limit in order to find the optimal
charging current. To do this it looks for either VBUS drooping
too low or for the charger to over-current.
BUG=chrome-os-partner:34946
BRANCH=samus
TEST=tested with a variety of BC1.2 chargers, type-C only chargers,
and PD chargers to make sure we always stabilize charging at an
appropriate current limit.
Change-Id: Icc95aa2738ddb221f163f91c14a342a0674f9e0f
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/247304
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|