summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* eve: Fix corner case for trackpad wakeDuncan Laurie2017-03-231-1/+9
* hammer: Increase HOOK stack sizeNicolas Boichat2017-03-231-1/+1
* g: add code to corrupt new header until further notice and move rw to 0.0.19Vadim Bendebury2017-03-221-16/+34
* cr50: add vendor command to restore corrupted headerVadim Bendebury2017-03-221-0/+141
* rowan: gpio: Change SUSPEND_L to PIN(C, 11)Yidi Lin2017-03-221-1/+1
* rowan: correct battery LED colorRong Chang2017-03-221-32/+32
* rowan: add support for recovery modeRong Chang2017-03-223-0/+20
* rowan: Config BMI160Yidi Lin2017-03-222-84/+74
* tigertail: usb-c muxNick Sanders2017-03-215-0/+619
* eve_fp: fix unittestsVincent Palatin2017-03-211-1/+1
* poppy: Add CONFIG_CMD_BUTTONNicolas Boichat2017-03-201-0/+1
* poppy: Define WIRELESS_GPIO_WWANFurquan Shaikh2017-03-202-1/+2
* eve: Enable trackpad wake from Deep S3Duncan Laurie2017-03-162-3/+48
* tcpm: Call usb_mux board_init on exit from low power modeDaisuke Nojiri2017-03-161-4/+9
* usb: Cleanup headersNicolas Boichat2017-03-165-3/+5
* hammer: Switch to RSA 3072 exp 3 keyNicolas Boichat2017-03-162-26/+38
* Add minimal fpc1140 driverVincent Palatin2017-03-164-11/+5
* eve_fp: minimalistic fingerprint sensor passthroughVincent Palatin2017-03-161-0/+34
* version: Store image size data in version structShawn Nematbakhsh2017-03-161-1/+1
* pyro: limit max input current for safetyBruce2017-03-151-0/+1
* poppy: Enable config flags to boot up without batteryDivya Sasidharan2017-03-151-0/+2
* cr50: use plt_rst_l low level as a sleep wake triggerVadim Bendebury2017-03-151-4/+13
* rowan: enable SPI and GPIO console commandsRong Chang2017-03-141-1/+3
* rowan: fix SPI2 reset sequence and chip select ALT functionRong Chang2017-03-142-1/+2
* rowan: change battery profile to 2 cellRong Chang2017-03-141-4/+4
* eve: Make ectool LED control interface more intuitiveDuncan Laurie2017-03-131-10/+23
* eve_fp: setup SPI slave communication on STM32L442Vincent Palatin2017-03-133-2/+6
* snappy: Disable MPUBruce2017-03-101-0/+2
* hammer: Enable internal pull-up on UART RX lineNicolas Boichat2017-03-101-1/+1
* pyro: Disable MPUBruce2017-03-101-0/+2
* hammer: Enable CONFIG_FORCE_CONSOLE_RESUMENicolas Boichat2017-03-101-0/+1
* Electro: DP CTS testing failed in HBR2 deterministic JitterRyan Zhang2017-03-101-0/+4
* poppy: Fix sensors locationGwendal Grignou2017-03-101-4/+4
* poppy: Enable tablet modeFurquan Shaikh2017-03-102-0/+8
* poppy: Wake on base attach/detachNicolas Boichat2017-03-101-6/+23
* snappy: Add state for discharge + fullBruce2017-03-092-0/+7
* eve: Increase the minimum battery level needed for try sourceScott2017-03-091-0/+2
* pyro: Add state for discharge + fullBruce2017-03-092-0/+10
* cr50: add rollback information to the sysinfo command outputVadim Bendebury2017-03-091-0/+4
* g: mark RW INFO rollback map space to match the header infomap fieldVadim Bendebury2017-03-091-0/+2
* eve: Fix LED behavior when discharging with full batteryDuncan Laurie2017-03-092-0/+16
* eve: Adjust charging parameters for eve boardDuncan Laurie2017-03-091-0/+1
* eve: discharge on AC when no charger is insertedDuncan Laurie2017-03-093-0/+58
* eve: Reduce max battery charge voltage for 0.5% marginDuncan Laurie2017-03-091-2/+2
* snappy: Set RW boot power threshold to 18wBruce2017-03-081-1/+1
* snappy: Name USB port numbers appropriatelyBruce2017-03-081-11/+22
* snappy: Lock EC and PD communicationBruce2017-03-081-6/+1
* pyro: Lock EC and PD communicationBruce2017-03-081-6/+1
* snappy: limit max input current for safetyBruce2017-03-071-1/+1
* cr50: make sys_rst_l wake on lowMary Ruthven2017-03-071-7/+12
View Lorry Controller Status