summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* chg_ramp: Add charge_is_consuming_full_input_current().Aseda Aboagye2017-11-0110-93/+1
* coral: Fix charging LED color for RoboScott Collyer2017-11-011-1/+1
* Nasher: Modify power led to meet project specificationlennon chen2017-10-311-0/+15
* poppy/nautilus: Move pmic vr decay enable/disable to suspend/resume hooksFurquan Shaikh2017-10-312-16/+4
* poppy/nautilus: Increase port80 buffer sizeFurquan Shaikh2017-10-312-0/+8
* nautilus: Correct the year in the headersPhilip Chen2017-10-317-7/+7
* coral: Fix default LED table for discharge in S3 stateScott Collyer2017-10-311-1/+1
* twinkie: clean-up disabled SNIFFER_HEADER_V2 codeVincent Palatin2017-10-312-165/+0
* hammer: Enable CONFIG_SHA256_UNROLLED in RO regionNicolas Boichat2017-10-301-0/+3
* driver: BMM150: Set max frequency based on repetitions settingGwendal Grignou2017-10-304-4/+4
* cr50: add rollback commandNick Sanders2017-10-271-0/+14
* zoombini: Limit ICL to 2.7A over 18V.Aseda Aboagye2017-10-271-0/+8
* zoombini: Update GPIO settings.Aseda Aboagye2017-10-271-2/+2
* zoombini: Add PMIC init.Aseda Aboagye2017-10-263-0/+33
* zoombini: cannonlake: Add 5V power good signal.Aseda Aboagye2017-10-263-6/+3
* driver: Rename pmic_tps650830 -> pmic_tps650x30.Aseda Aboagye2017-10-261-15/+15
* soraka: Revive battery while coming out of disconnectFurquan Shaikh2017-10-261-1/+50
* board: reef_it8320: disable CONFIG_CONSOLE_CMDHELP to save flash spaceDino Li2017-10-261-0/+1
* coral: Enable ACPI channel for console printsScott Collyer2017-10-251-2/+2
* poppy: Update LED behaviourNicolas Boichat2017-10-251-5/+1
* scarlet: remove hibernateDerek Basehore2017-10-252-24/+1
* Fizz: Inform host of BJ plug/unplug eventDaisuke Nojiri2017-10-243-13/+39
* tpm: let the caller of TPM reset decide if the EC needs to be reset tooVadim Bendebury2017-10-241-2/+15
* servo_v4: Advertise multiple >5V PDOs to DUTShawn Nematbakhsh2017-10-241-29/+47
* tpm2: add nvmem data to the right segmentVadim Bendebury2017-10-231-21/+23
* ec: add initial nautilus boardChris Wang2017-10-238-0/+2280
* zoombini: Add support for TI SN5S330 for Port 0.Aseda Aboagye2017-10-232-1/+21
* zoombini: Temporarily use GPIOs for SLP signals.Aseda Aboagye2017-10-231-1/+2
* zoombini: Reject chg port none w/ critical batt.Aseda Aboagye2017-10-231-0/+15
* zoombini: Change PD_MAX_POWER to 60W.Aseda Aboagye2017-10-231-1/+1
* zoombini: Add pull downs on the sleep signals.Aseda Aboagye2017-10-231-4/+4
* zoombini: Initialize Vbus suppliers.Aseda Aboagye2017-10-231-0/+15
* bq24392: Make chip_en active low.Aseda Aboagye2017-10-232-3/+4
* scarlet: Remove CMD_CHARGER_PSYSPhilip Chen2017-10-211-3/+0
* scarlet: Enable DISCHARGE_ON_ACPhilip Chen2017-10-211-0/+1
* scarlet: Add min/max frequencies for sensorsGwendal Grignou2017-10-201-0/+6
* hana: Add EC console USART internal pull-upRong Chang2017-10-201-1/+1
* poppy: Add CONFIG_BATTERY_PRESENT_CUSTOM optionNicolas Boichat2017-10-191-0/+1
* Poppy: change unused pins configKyoung Kim2017-10-192-2/+46
* poppy: If base ADC value is unclear, try reading it againNicolas Boichat2017-10-191-10/+17
* servo_v4: Add CHG / DUT port voltage synchronizationShawn Nematbakhsh2017-10-192-57/+112
* MN50: deleteMarius Schilder2017-10-198-1216/+0
* charge_ramp: Ramp USB-C DTS sourcesShawn Nematbakhsh2017-10-191-0/+1
* pd: Remove ACCESSORY statesShawn Nematbakhsh2017-10-1913-15/+15
* pd: Add "freeze" dual-role policyShawn Nematbakhsh2017-10-191-0/+4
* servo_v4: Use charge_manager for input port / ILIM selectionShawn Nematbakhsh2017-10-192-43/+28
* staff: Adjust touchpad dimensionsNicolas Boichat2017-10-191-5/+4
* scarlet: Upgrade the charger IC to RT9467 on rev2Philip Chen2017-10-181-1/+1
* scarlet: Use TCPC to detect VBUSPhilip Chen2017-10-181-1/+2
* chip/stm32/usart: Add flags to usart_configNicolas Boichat2017-10-185-0/+9
View Lorry Controller Status