summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* EC: Implementation for AP reboot from G3 state using ectool command.Sooraj Govindan2019-12-103-1/+40
* akemi: Remove CONFIG_EC_FEATURE_BOARD_OVERRIDEdnojiri2019-12-102-8/+1
* glados/chell: Stop building these boardsAseda Aboagye2019-12-101-1/+1
* tcpci: Move HOOK_USB_PD_CONNECT earlier to fix VBUS sourceEdward Hill2019-12-101-5/+5
* trembyle: Use amd_fp5_usb_mux_driver for both C0 and C1Edward Hill2019-12-101-2/+1
* pi3usb9201: use i2c field update common functionDenis Brockus2019-12-101-18/+4
* isl9241: use i2c update for read/modify/writeDenis Brockus2019-12-101-42/+25
* nct38xx: Use common tcpci set_polarityDenis Brockus2019-12-101-15/+1
* tcpci: tcpci_tcpm_set_polarity should not clobberDenis Brockus2019-12-101-2/+4
* nct38xx: change rmw operations to use i2c updateDenis Brockus2019-12-101-17/+14
* stm32f0: expose i2c_init_portTing Shen2019-12-102-2/+18
* foob: initial files commitPeichao Wang2019-12-107-0/+889
* power/mt8183: correct EN_PP1800_S5_L enable timingYilun Lin2019-12-1010-90/+51
* glados: remove some console command in RO to get more spaceTing Shen2019-12-101-0/+2
* jacuzzi: enlarge stack for hook_taskTing Shen2019-12-101-1/+1
* akemi: enable ec feature flag override functionxiaoqiang.zhu2019-12-102-0/+22
* power/cometlake-discrete: implement power sequencingstabilize-12748.B-masterPeter Marheine2019-12-104-95/+271
* TCPMv2: Fixed PR swap request from charge managerSam Hurst2019-12-105-6/+20
* Define board_override_features_flags APIs as overridablednojiri2019-12-1023-98/+27
* puff: implement PP5000 port power controlPeter Marheine2019-12-106-9/+262
* tcpci: add tcpc_update routines for read/mod/writeDenis Brockus2019-12-102-56/+69
* i2c: add generic read/modify/write operationsDenis Brockus2019-12-102-0/+137
* volteer: Delay assertion of SYS_PWROKKeith Short2019-12-091-0/+11
* TCPMv2: Fixed the pointer problem with decoding SRC_CAP PDOSam Hurst2019-12-091-1/+1
* ccd_howtos: add ccd faft setupMary Ruthven2019-12-091-2/+167
* Morphius: create new boardEdward Hill2019-12-098-0/+424
* tcpci: add command to dump standard TCPCI registersKeith Short2019-12-092-0/+90
* TCPMv2: Handle unexpected msgs received during Port DiscoverySam Hurst2019-12-091-3/+9
* cr50: narrow the condition for custom TPM command codesNamyoon Woo2019-12-091-1/+1
* jacuzzi: remove CONFIG_USB_PD_VBUS_MEASURE_NOT_PRESENTTing Shen2019-12-093-3/+0
* fusb302: implement vbus measurement using tcpcTing Shen2019-12-095-0/+88
* charger/rt946x: fix updating CHARGE_SUPPLIER_NONEEric Yilun Lin2019-12-091-1/+2
* baseboard/kukui: enable CONFIG_USB_PD_PREFER_MVYilun Lin2019-12-092-0/+22
* usb_pd: request preferred voltage PDOYilun Lin2019-12-097-7/+279
* jinlon: correct accel orientationDevin Lu2019-12-091-4/+4
* volteer: update battery parameterScott Chao2019-12-091-5/+5
* board: Set min/max frequency attributesGwendal Grignou2019-12-099-2/+24
* tpmtest: added more corner case, make it work again with OpenSSL 1.1Vadim Sukhomlinov2019-12-072-34/+315
* gsctool: add 'force_ro' optionVadim Bendebury2019-12-072-2/+12
* TCPMv2: Operating as a SNK, clear the End AMS flagSam Hurst2019-12-071-3/+17
* cr50_rma_open: Disable UART timestampsEvan Green2019-12-071-1/+2
* TCPMv2: Don't use SinkTXOK/NG in middle of partner-initiated PD3.0 AMSSam Hurst2019-12-071-25/+35
* volteer: Enable BC1.2 charge rampVijay Hiremath2019-12-074-19/+46
* volteer: Enable Burnisde Bridge retimerVijay Hiremath2019-12-077-10/+41
* TCPMv2: Don't turn off VCONN during a PR_SWAPSam Hurst2019-12-061-1/+1
* build_assert: use _Static_assertJett Rink2019-12-061-5/+5
* usbc: use different task pause for each portDenis Brockus2019-12-061-4/+6
* hatch: refactor PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/Josh Tsai2019-12-069-6/+45
* make: Add check for flash supportCraig Hesling2019-12-061-1/+4
* make: Add help messages for flash variantsCraig Hesling2019-12-061-0/+4
View Lorry Controller Status