summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
...
* hammer: Enable internal pull-up on UART RX lineNicolas Boichat2017-03-101-1/+1
* pyro: Disable MPUBruce2017-03-101-0/+2
* hammer: Enable CONFIG_FORCE_CONSOLE_RESUMENicolas Boichat2017-03-101-0/+1
* Electro: DP CTS testing failed in HBR2 deterministic JitterRyan Zhang2017-03-102-0/+5
* poppy: Fix sensors locationGwendal Grignou2017-03-101-4/+4
* poppy: Enable tablet modeFurquan Shaikh2017-03-102-0/+8
* poppy: Wake on base attach/detachNicolas Boichat2017-03-101-6/+23
* g: fix sps interrupt assertion logicVadim Bendebury2017-03-101-8/+15
* snappy: Add state for discharge + fullBruce2017-03-092-0/+7
* eve: Increase the minimum battery level needed for try sourceScott2017-03-091-0/+2
* pyro: Add state for discharge + fullBruce2017-03-092-0/+10
* g: add a cli command to erase flash INFO1 spaceVadim Bendebury2017-03-091-0/+61
* cr50: add rollback information to the sysinfo command outputVadim Bendebury2017-03-093-0/+55
* cr50: use empty rollback map when building debug imagesVadim Bendebury2017-03-091-2/+19
* g: mark RW INFO rollback map space to match the header infomap fieldVadim Bendebury2017-03-095-10/+142
* eve: Fix LED behavior when discharging with full batteryDuncan Laurie2017-03-092-0/+16
* eve: Adjust charging parameters for eve boardDuncan Laurie2017-03-091-0/+1
* eve: discharge on AC when no charger is insertedDuncan Laurie2017-03-093-0/+58
* eve: Reduce max battery charge voltage for 0.5% marginDuncan Laurie2017-03-091-2/+2
* battery: Allow BATTERY_LEVEL_NEAR_FULL to be defined by boardDuncan Laurie2017-03-092-0/+10
* snappy: Set RW boot power threshold to 18wBruce2017-03-081-1/+1
* snappy: Name USB port numbers appropriatelyBruce2017-03-081-11/+22
* g: enable usb wakeup interruptsMary Ruthven2017-03-081-2/+2
* cr50: prepare to release rw 0.0.17Vadim Bendebury2017-03-082-2/+2
* snappy: Lock EC and PD communicationBruce2017-03-081-6/+1
* common: Ensure print_build_string() prints short strings properly.Carl Hamilton2017-03-081-1/+1
* driver/touchpad_elan: Use slightly more precise pressure adjustmentNicolas Boichat2017-03-081-3/+6
* pyro: Lock EC and PD communicationBruce2017-03-081-6/+1
* anx74xx: fix role bits for GOOD_CRCVincent Palatin2017-03-082-37/+19
* chip/stm32/usb: Add support for USB SET_FEATURE control requestsNicolas Boichat2017-03-082-5/+35
* snappy: limit max input current for safetyBruce2017-03-071-1/+1
* cr50: make sys_rst_l wake on lowMary Ruthven2017-03-071-7/+12
* Reef: Disable MPUDaisuke Nojiri2017-03-071-0/+2
* cr50: Only drive CCD_MODE_L when in CCD mode.Aseda Aboagye2017-03-075-28/+89
* poppy: Enable MKBP keyboard protocolFurquan Shaikh2017-03-071-0/+1
* cr50: enable utmi wakeupsMary Ruthven2017-03-073-2/+5
* pdcontrol: Suspend port individuallyDaisuke Nojiri2017-03-076-70/+82
* hammer: Switch trackpad I2C to 400 kHz, decrease EP interval to 2msNicolas Boichat2017-03-072-2/+2
* cr50: change DEV to DBG in debug images version stringsVadim Bendebury2017-03-071-1/+1
* g: add deep sleep counter to idle.cMary Ruthven2017-03-072-12/+20
* init_chip: add comment document pmu scratch registersMary Ruthven2017-03-071-0/+21
* pyro: Fix power-up sequence for Anx3429Bruce2017-03-061-4/+16
* pyro: Set RW boot power threshold to 18wBruce2017-03-061-1/+1
* pyro: Name USB port numbers appropriatelyBruce2017-03-061-9/+22
* npcx: lpc: Remove WUI57 of table 0 initialization on eSPI modeFurquan Shaikh2017-03-061-1/+11
* Add option to adjust compiler optimization on RSAVincent Palatin2017-03-062-0/+11
* charger: Add state for discharge + fullDaisuke Nojiri2017-03-035-2/+23
* npcx: gpio: Fixed bug GPIO's ISRs clear the other pending bits.Mulin Chao2017-03-031-5/+6
* hammer: Add rollback protection flash regionNicolas Boichat2017-03-021-2/+54
* Include <stdint.h> in include/watchdog.h.Jeff Andersen2017-03-021-0/+2