summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
...
* driver: bmi160: Implement temperature readingYuval Peress2020-06-201-0/+6
* jinlon: Update fan tableDevin Lu2020-06-121-2/+2
* motion_sense: hold 'ready_status' until next lid angle calculationInno.Park2020-06-091-3/+4
* driver: lis2ds: add a setting if interrupt active low or notInno.Park2020-06-091-3/+12
* nightfury: enable FIFO interrupt for lid accelInno.Park2020-06-093-4/+4
* nightfury : blink charge led on low batteryYongBeum.Ha2020-05-261-2/+3
* driver: bma2x2: Fix frequency precision errorGwendal Grignou2020-05-161-8/+10
* vivaldi: Don't disable extra keysRajat Jain2020-05-151-3/+0
* Jinlon: Choose a keyboard layout even for bad SKU IDRajat Jain2020-05-061-2/+3
* HACK: jinlon: Prevent system can't power onDevin Lu2020-05-041-0/+22
* bc12: Limit max current to 1.5AAseda Aboagye2020-05-016-31/+53
* jinlon: Reduce input voltage to 5V when battery fullDevin Lu2020-04-301-1/+28
* Jinlon: Select CONFIG_KEYBOARD_REFRESH_ROW3Rajat Jain2020-04-291-0/+1
* jinlon: Enable multi-profile DPTFDevin Lu2020-04-281-0/+1
* jinlon: set rpm deviation to 1%Devin Lu2020-04-281-0/+1
* jinlon: update thermal table for board version 3Devin Lu2020-04-242-48/+46
* Jinlon: Initialize keyboardRajat Jain2020-04-231-0/+61
* common/vivaldi: Make the "Alt+VolUp+r" work on vivaldi keyboardsRajat Jain2020-04-234-4/+25
* common/keyboard_vivaldi: New keyboard framework for custom layoutRajat Jain2020-04-238-1/+178
* common: Make scancode table always mutableRajat Jain2020-04-238-46/+85
* ec_commands.h: Add host command EC_CMD_GET_KEYBD_CONFIGRajat Jain2020-04-231-0/+78
* common/vivaldi: Revert Vivaldi changesRajat Jain2020-04-234-121/+0
* nightfury: update base als default_rangeJongpil Jung2020-04-151-1/+1
* HACK: dratini: Prevent system can't power onDevin Lu2020-04-071-0/+21
* nightfury : remove ambient thermal sensorYongBeum.Ha2020-04-032-15/+6
* nightfury : Enable PWM and Tach for FanYongBeum.Ha2020-04-032-3/+5
* tcpm/anx7447.c: use chip internal timer to generate HPD IRQXin Ji2020-04-032-10/+31
* nightfury: fix new lid accel orientation and odr configInno.Park2020-04-021-4/+4
* nightfury: Enable fanYongBeum.Ha2020-04-013-2/+59
* dratini: change thermal configuration for PVTDevin Lu2020-03-311-1/+1
* Reland "nightfury: Enable base light sensor"Jongpil Jung2020-03-312-18/+11
* Revert "nightfury: Enable base light sensor"Bob Moragues2020-03-312-14/+18
* common/vivaldi: Minor fixupsRajat Jain2020-03-302-4/+7
* nightfury: Enable base light sensorJongpil Jung2020-03-302-18/+14
* nightfury: enable lid accelerometer lis2ds12Inno.Park2020-03-302-9/+23
* driver: lis2ds12: Add driver supportMario Tesi2020-03-307-0/+557
* max14637: fix build error in firmware-hatch-12672.BJongpil Jung2020-03-261-1/+1
* hatch/baseboard: Increase TCPC i2c speed to 400KhzDevin Lu2020-03-261-2/+2
* nightfury : change BC1.2 IC to Pericom 9201YongBeum.Ha2020-03-262-13/+12
* dratini: Reduce input voltage to 5V when battery fullDevin Lu2020-03-251-1/+28
* nightfury: remove lid als/rgb sensor and camera syncJongpil Jung2020-03-243-119/+2
* nightfury: Initial EC imageraymondchung2020-03-217-0/+1161
* max14637: Modify driver to have chip_enable active by defaultScott Collyer2020-03-201-21/+48
* Revert "board/jinlon: Enable vivaldi configuration"Rajat Jain2020-03-192-23/+0
* board/jinlon: Enable vivaldi configurationRajat Jain2020-03-182-0/+23
* common/keyboard_vivaldi: Support for new Vivaldi keyboardRajat Jain2020-03-185-10/+150
* dratini: Enable HDMI power and add debounce to HDMI HPD low interruptTim Wawrzynczak2020-03-172-2/+40
* anx7447.c: anx7447/anx3447 has an additional condition(0xAA:bit6) for Look4co...Xin Ji2020-03-172-2/+41
* stm32: Fix manual interrupt clearing functionCraig Hesling2020-03-161-1/+3
* driver: bmi160: Fix ODR to REG when rate is less than 100Hz properlyGwendal Grignou2020-03-101-1/+1
View Lorry Controller Status