diff options
Diffstat (limited to 'zephyr/projects/nissa')
113 files changed, 0 insertions, 15689 deletions
diff --git a/zephyr/projects/nissa/BUILD.py b/zephyr/projects/nissa/BUILD.py deleted file mode 100644 index b1affe7b4c..0000000000 --- a/zephyr/projects/nissa/BUILD.py +++ /dev/null @@ -1,66 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -"""Define zmake projects for nissa.""" - -# Nivviks and Craask, Pujjo, Xivu has NPCX993F, Nereid and Joxer, Yaviks has ITE81302 - - -def register_nissa_project( - project_name, - chip="it81302bx", -): - """Register a variant of nissa.""" - register_func = register_binman_project - if chip.startswith("npcx"): - register_func = register_npcx_project - - chip_kconfig = {"it81302bx": "it8xxx2", "npcx9m3f": "npcx"}[chip] - - return register_func( - project_name=project_name, - zephyr_board=chip, - dts_overlays=[here / project_name / "project.overlay"], - kconfig_files=[ - here / "program.conf", - here / f"{chip_kconfig}_program.conf", - here / project_name / "project.conf", - ], - ) - - -nivviks = register_nissa_project( - project_name="nivviks", - chip="npcx9m3f", -) - -nereid = register_nissa_project( - project_name="nereid", - chip="it81302bx", -) - -craask = register_nissa_project( - project_name="craask", - chip="npcx9m3f", -) - -pujjo = register_nissa_project( - project_name="pujjo", - chip="npcx9m3f", -) - -xivu = register_nissa_project( - project_name="xivu", - chip="npcx9m3f", -) - -joxer = register_nissa_project( - project_name="joxer", - chip="it81302bx", -) - -yaviks = register_nissa_project( - project_name="yaviks", - chip="it81302bx", -) diff --git a/zephyr/projects/nissa/CMakeLists.txt b/zephyr/projects/nissa/CMakeLists.txt deleted file mode 100644 index 8769af58ba..0000000000 --- a/zephyr/projects/nissa/CMakeLists.txt +++ /dev/null @@ -1,84 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -cmake_minimum_required(VERSION 3.13.1) - -find_package(Zephyr REQUIRED HINTS "${ZEPHYR_BASE}") - -zephyr_include_directories(include) -zephyr_library_sources("src/common.c") -zephyr_library_sources("src/sub_board.c") -zephyr_library_sources_ifdef(CONFIG_AP_PWRSEQ "src/board_power.c") - -if(DEFINED CONFIG_BOARD_NIVVIKS) - project(nivviks) - zephyr_library_sources( - "nivviks/src/led.c" - "nivviks/src/form_factor.c" - "nivviks/src/keyboard.c" - ) - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_FAN "nivviks/src/fan.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC "nivviks/src/usbc.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGER "nivviks/src/charger.c") -endif() -if(DEFINED CONFIG_BOARD_NEREID) - project(nereid) - zephyr_library_sources( - "src/led.c" - "nereid/src/keyboard.c" - "nereid/src/hdmi.c" - ) - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC "nereid/src/usbc.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGER "nereid/src/charger.c") -endif() -if(DEFINED CONFIG_BOARD_CRAASK) - zephyr_library_sources( - "craask/src/form_factor.c" - "craask/src/keyboard.c" - "craask/src/led.c" - ) - project(craask) - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC "craask/src/usbc.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGER "craask/src/charger.c") -endif() -if(DEFINED CONFIG_BOARD_PUJJO) - project(pujjo) - zephyr_library_sources( - "pujjo/src/led.c" - "pujjo/src/keyboard.c" - "pujjo/src/hdmi.c" - "pujjo/src/form_factor.c" - ) - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_FAN "pujjo/src/fan.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC "pujjo/src/usbc.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGER "pujjo/src/charger.c") -endif() -if(DEFINED CONFIG_BOARD_XIVU) - project(xivu) - zephyr_library_sources( - "xivu/src/keyboard.c" - ) - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC "xivu/src/usbc.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGER "xivu/src/charger.c") -endif() -if(DEFINED CONFIG_BOARD_JOXER) - project(joxer) - zephyr_library_sources( - "joxer/src/led.c" - "joxer/src/keyboard.c" - ) - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC "joxer/src/usbc.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGER "joxer/src/charger.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_FAN "joxer/src/fan.c") -endif() -if(DEFINED CONFIG_BOARD_YAVIKS) - project(yaviks) - zephyr_library_sources( - "yaviks/src/led.c" - "yaviks/src/keyboard.c" - ) - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC "yaviks/src/usbc.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGER "yaviks/src/charger.c") - zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_FAN "yaviks/src/fan.c") -endif()
\ No newline at end of file diff --git a/zephyr/projects/nissa/Kconfig b/zephyr/projects/nissa/Kconfig deleted file mode 100644 index 9e9ffc2528..0000000000 --- a/zephyr/projects/nissa/Kconfig +++ /dev/null @@ -1,52 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -config BOARD_NIVVIKS - bool "Google Nivviks Board" - help - Build Google Nivviks reference board. Nivviks has Intel ADL-N SoC - with NPCX993FA0BX EC. - -config BOARD_NEREID - bool "Google Nereid Board" - help - Build Google Nereid reference board. Nereid has Intel ADL-N SoC - with IT81302 EC. - -config BOARD_CRAASK - bool "Google Craask Board" - help - Build Google Craask board. Craask has Intel ADL-N SoC - with NPCX993FA0BX EC. - -config BOARD_PUJJO - bool "Google Pujjo Board" - help - Build Google Pujjo board. Pujjo has Intel ADL-N SoC - with NPCX993FA0BX EC. - -config BOARD_XIVU - bool "Google Xivu Board" - help - Build Google Xivu board. Xivu has Intel ADL-N SoC - with NPCX993FA0BX EC. - -config BOARD_JOXER - bool "Google Joxer Board" - help - Build Google Joxer reference board. Joxer has Intel ADL-N SoC - with IT81302 EC. - -config BOARD_YAVIKS - bool "Google Yaviks Board" - help - Build Google Yaviks board. Yaviks has Intel ADL-N SoC - with IT81302 EC. - - -module = NISSA -module-str = Nissa board-specific code -source "subsys/logging/Kconfig.template.log_config" - -source "Kconfig.zephyr" diff --git a/zephyr/projects/nissa/cbi.dtsi b/zephyr/projects/nissa/cbi.dtsi deleted file mode 100644 index d841be1624..0000000000 --- a/zephyr/projects/nissa/cbi.dtsi +++ /dev/null @@ -1,61 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - nissa-fw-config { - compatible = "cros-ec,cbi-fw-config"; - - /* - * FW_CONFIG field to indicate which sub-board - * is attached. - */ - sub-board { - enum-name = "FW_SUB_BOARD"; - start = <0>; - size = <2>; - - sub-board-1 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_SUB_BOARD_1"; - value = <1>; - }; - sub-board-2 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_SUB_BOARD_2"; - value = <2>; - }; - sub-board-3 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_SUB_BOARD_3"; - value = <3>; - }; - }; - - /* - * FW_CONFIG field to enable fan or not. - */ - fan { - enum-name = "FW_FAN"; - start = <2>; - size = <1>; - - no-fan { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FAN_NOT_PRESENT"; - value = <0>; - }; - fan-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FAN_PRESENT"; - value = <1>; - /* - * Set as default so that unprovisioned - * configs will run the fan regardless. - */ - default; - }; - }; - }; -}; diff --git a/zephyr/projects/nissa/craask/cbi.dtsi b/zephyr/projects/nissa/craask/cbi.dtsi deleted file mode 100644 index 4c2e052f4d..0000000000 --- a/zephyr/projects/nissa/craask/cbi.dtsi +++ /dev/null @@ -1,107 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - /* Craask-specific fw_config fields. */ - nissa-fw-config { - /* - * FW_CONFIG field to describe Lid sensor orientation. - */ - lid-inversion { - enum-name = "FW_LID_INVERSION"; - start = <8>; - size = <1>; - - /* - * 0: regular placement of the lid sensor - * 1: rotate 180' of xy plane. - */ - regular { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_LID_REGULAR"; - value = <0>; - default; - }; - xy_rotate_180 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_LID_XY_ROT_180"; - value = <1>; - }; - }; - /* - * FW_CONFIG field to describe Clamshell/Convertible. - */ - form_factor { - enum-name = "FORM_FACTOR"; - start = <9>; - size = <1>; - - /* - * 0: convertible, 1: clamshell - */ - convertible { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "CONVERTIBLE"; - value = <0>; - }; - clamshell { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "CLAMSHELL"; - value = <1>; - }; - }; - }; - /* Craask-specific ssfc fields. */ - cbi-ssfc { - compatible = "named-cbi-ssfc"; - /* - * SSFC bit0-1 was defined for AUDIO CODEC. - * 0: ALC5682I_VS - * 1: NAU8825 - */ - audio_codec { - enum-name = "AUDIO_CODEC"; - size = <2>; - }; - /* - * SSFC field to identify LID motion sensor. - */ - lid-sensor { - enum-name = "LID_SENSOR"; - size = <2>; - - lid_sensor_0: lis2dw12 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <0>; - default; - }; - lid_sensor_1: bma422 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <1>; - }; - }; - /* - * SSFC field to identify BASE motion sensor. - */ - base-sensor { - enum-name = "BASE_SENSOR"; - size = <2>; - - base_sensor_0: lsm6dso { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <0>; - default; - }; - base_sensor_1: bmi323 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <1>; - }; - }; - }; -}; diff --git a/zephyr/projects/nissa/craask/generated.dtsi b/zephyr/projects/nissa/craask/generated.dtsi deleted file mode 100644 index 4303bbd4c5..0000000000 --- a/zephyr/projects/nissa/craask/generated.dtsi +++ /dev/null @@ -1,288 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ec_vsense_pp1050_proc: ec_vsense_pp1050_proc { - enum-name = "ADC_PP1050_PROC"; - io-channels = <&adc0 4>; - }; - adc_ec_vsense_pp3300_s5: ec_vsense_pp3300_s5 { - enum-name = "ADC_PP3300_S5"; - io-channels = <&adc0 6>; - }; - adc_temp_sensor_1: temp_sensor_1 { - enum-name = "ADC_TEMP_SENSOR_1"; - io-channels = <&adc0 0>; - }; - adc_temp_sensor_2: temp_sensor_2 { - enum-name = "ADC_TEMP_SENSOR_2"; - io-channels = <&adc0 1>; - }; - adc_temp_sensor_3: temp_sensor_3 { - enum-name = "ADC_TEMP_SENSOR_3"; - io-channels = <&adc0 10>; - }; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_acc_int_l: acc_int_l { - gpios = <&gpio5 0 GPIO_INPUT>; - }; - gpio_all_sys_pwrgd: all_sys_pwrgd { - gpios = <&gpioa 7 GPIO_INPUT>; - }; - gpio_ccd_mode_odl: ccd_mode_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - gpio_cpu_c10_gate_l: cpu_c10_gate_l { - gpios = <&gpio6 7 GPIO_INPUT>; - }; - gpio_ec_battery_pres_odl: ec_battery_pres_odl { - gpios = <&gpioa 3 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - gpio_ec_cbi_wp: ec_cbi_wp { - gpios = <&gpio7 4 GPIO_OUTPUT>; - }; - gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - gpios = <&gpiod 3 GPIO_ODR_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_entering_rw: ec_entering_rw { - gpios = <&gpio0 3 GPIO_OUTPUT>; - enum-name = "GPIO_ENTERING_RW"; - }; - gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - gpios = <&gpio7 5 GPIO_OUTPUT>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_kso_02_inv: ec_kso_02_inv { - gpios = <&gpio1 7 (GPIO_OUTPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_odl { - gpios = <&gpiob 0 GPIO_ODR_LOW>; - }; - gpio_ec_prochot_odl: ec_prochot_odl { - gpios = <&gpiof 1 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - gpios = <&gpio6 1 GPIO_OUTPUT>; - }; - gpio_ec_soc_hdmi_hpd: ec_soc_hdmi_hpd { - gpios = <&gpioe 4 GPIO_OUTPUT>; - }; - gpio_ec_soc_int_odl: ec_soc_int_odl { - gpios = <&gpio8 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - gpios = <&gpio7 2 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - gpios = <&gpioc 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - gpios = <&gpioa 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_rtcrst: ec_soc_rtcrst { - gpios = <&gpio7 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - gpios = <&gpio3 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - gpios = <&gpioa 4 GPIO_ODR_HIGH>; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpioa 1 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_en_kb_bl: en_kb_bl { - gpios = <&gpioa 0 GPIO_OUTPUT>; - enum-name = "GPIO_EN_KEYBOARD_BACKLIGHT"; - }; - gpio_en_pp3300_s5: en_pp3300_s5 { - gpios = <&gpiob 6 GPIO_OUTPUT>; - enum-name = "GPIO_TEMP_SENSOR_POWER"; - }; - gpio_en_pp5000_pen_x: en_pp5000_pen_x { - gpios = <&gpioe 2 GPIO_OUTPUT>; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpio4 0 GPIO_OUTPUT>; - }; - gpio_en_slp_z: en_slp_z { - gpios = <&gpioe 1 GPIO_OUTPUT>; - }; - gpio_en_usb_a0_vbus: en_usb_a0_vbus { - gpios = <&gpio9 1 GPIO_OUTPUT>; - }; - gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpio0 0 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_hdmi_sel: hdmi_sel { - gpios = <&gpioc 6 GPIO_OUTPUT>; - }; - gpio_imu_int_l: imu_int_l { - gpios = <&gpio5 6 GPIO_INPUT>; - }; - gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - gpios = <&gpio4 3 GPIO_INPUT>; - }; - gpio_lid_open: lid_open { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_pen_detect_odl: pen_detect_odl { - gpios = <&gpio9 6 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - gpios = <&gpiof 0 GPIO_INPUT>; - }; - gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - gpios = <&gpio4 2 GPIO_INPUT>; - }; - gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - gpios = <&gpio9 4 GPIO_INPUT_PULL_UP>; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpio9 7 GPIO_INPUT>; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioa 5 GPIO_INPUT>; - }; - gpio_slp_s4_l: slp_s4_l { - gpios = <&gpio7 0 GPIO_INPUT>; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpio6 2 GPIO_INPUT>; - }; - gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - gpios = <&gpiod 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB2_ILIM_SEL"; - }; - gpio_sys_rst_odl: sys_rst_odl { - gpios = <&gpioc 5 GPIO_ODR_HIGH>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpio9 5 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - gpios = <&gpio8 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB1_ILIM_SEL"; - }; - gpio_usb_c0_int_odl: usb_c0_int_odl { - gpios = <&gpio0 1 GPIO_INPUT_PULL_UP>; - }; - gpio_vccin_aux_vid0: vccin_aux_vid0 { - gpios = <&gpio9 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - gpio_vccin_aux_vid1: vccin_aux_vid1 { - gpios = <&gpioe 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - gpio_voldn_btn_odl: voldn_btn_odl { - gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_volup_btn_odl: volup_btn_odl { - gpios = <&gpioa 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - }; - - named-i2c-ports { - compatible = "named-i2c-ports"; - - i2c_ec_i2c_eeprom: ec_i2c_eeprom { - i2c-port = <&i2c0_0>; - enum-names = "I2C_PORT_EEPROM"; - }; - i2c_ec_i2c_sensor: ec_i2c_sensor { - i2c-port = <&i2c1_0>; - enum-names = "I2C_PORT_SENSOR"; - }; - i2c_ec_i2c_usb_c0: ec_i2c_usb_c0 { - i2c-port = <&i2c3_0>; - enum-names = "I2C_PORT_USB_C0_TCPC"; - }; - i2c_ec_i2c_sub_usb_c1: ec_i2c_sub_usb_c1 { - i2c-port = <&i2c5_1>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - }; - i2c_ec_i2c_batt: ec_i2c_batt { - i2c-port = <&i2c7_0>; - enum-names = "I2C_PORT_BATTERY"; - }; - }; -}; - -&adc0 { - status = "okay"; - pinctrl-0 = <&adc0_chan0_gp45 - &adc0_chan1_gp44 - &adc0_chan4_gp41 - &adc0_chan6_gp34 - &adc0_chan10_gpe0>; - pinctrl-names = "default"; -}; - -&i2c0_0 { - status = "okay"; - pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; - pinctrl-names = "default"; -}; - -&i2c1_0 { - status = "okay"; - pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; - pinctrl-names = "default"; -}; - -&i2c3_0 { - status = "okay"; - pinctrl-0 = <&i2c3_0_sda_scl_gpd0_d1>; - pinctrl-names = "default"; -}; - -&i2c5_1 { - status = "okay"; - pinctrl-0 = <&i2c5_1_sda_scl_gpf4_f5>; - pinctrl-names = "default"; -}; - -&i2c7_0 { - status = "okay"; - pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; - pinctrl-names = "default"; -}; - -&i2c_ctrl0 { - status = "okay"; -}; - -&i2c_ctrl1 { - status = "okay"; -}; - -&i2c_ctrl3 { - status = "okay"; -}; - -&i2c_ctrl5 { - status = "okay"; -}; - -&i2c_ctrl7 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/craask/keyboard.dtsi b/zephyr/projects/nissa/craask/keyboard.dtsi deleted file mode 100644 index f9e46de1f2..0000000000 --- a/zephyr/projects/nissa/craask/keyboard.dtsi +++ /dev/null @@ -1,32 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -&cros_kb_raw { - status = "okay"; - /* No KSO2 (it's inverted and implemented by GPIO) */ - pinctrl-0 = < - &ksi0_gp31 - &ksi1_gp30 - &ksi2_gp27 - &ksi3_gp26 - &ksi4_gp25 - &ksi5_gp24 - &ksi6_gp23 - &ksi7_gp22 - &kso00_gp21 - &kso01_gp20 - &kso03_gp16 - &kso04_gp15 - &kso05_gp14 - &kso06_gp13 - &kso07_gp12 - &kso08_gp11 - &kso09_gp10 - &kso10_gp07 - &kso11_gp06 - &kso12_gp05 - >; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/craask/motionsense.dtsi b/zephyr/projects/nissa/craask/motionsense.dtsi deleted file mode 100644 index 448aed6991..0000000000 --- a/zephyr/projects/nissa/craask/motionsense.dtsi +++ /dev/null @@ -1,257 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * Interrupt bindings for sensor devices. - */ - lsm6dso-int = &base_accel; - lis2dw12-int = &lid_accel; - bmi3xx-int = &base_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - lid_mutex: lis2dw12-mutex { - }; - - lid_mutex_bma422: bma422-mutex { - }; - - base_mutex: base-mutex { - }; - - base_mutex_bmi323: bmi323-mutex { - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <(-1) 0 0 - 0 1 0 - 0 0 (-1)>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <1 0 0 - 0 (-1) 0 - 0 0 (-1)>; - }; - - base_rot_ver1: base-rotation-ver1 { - mat33 = <(-1) 0 0 - 0 (-1) 0 - 0 0 1>; - }; - - lid_rot_bma422: lid-rotation-bma { - mat33 = <1 0 0 - 0 (-1) 0 - 0 0 (-1)>; - }; - - base_rot_bmi323: base-rotation-bmi323 { - mat33 = <1 0 0 - 0 (-1) 0 - 0 0 (-1)>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - lsm6dso_accel_data: lsm6dso-accel-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - lsm6dso_gyro_data: lsm6dso-gyro-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - lis2dw12_data: lis2dw12-drv-data { - compatible = "cros-ec,drvdata-lis2dw12"; - status = "okay"; - }; - - bma422_data: bma4xx-drv-data { - compatible = "cros-ec,drvdata-bma4xx"; - status = "okay"; - }; - - bmi323_data: bmi323-drv-data { - compatible = "cros-ec,drvdata-bmi3xx"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The nodelabel "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - * TODO(b/238139272): The first entries of the array must be - * accelerometers,then gyroscope. Fix this dependency in the DTS - * processing which makes the devicetree entries independent. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,lis2dw12"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&lis2dw12_data>; - i2c-spi-addr-flags = "LIS2DWL_ADDR0_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,lsm6dso-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&lsm6dso_accel_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_gyro: base-gyro { - compatible = "cros-ec,lsm6dso-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <(1000 | ROUND_UP_FLAG)>; /* dps */ - drv-data = <&lsm6dso_gyro_data>; - }; - }; - - motionsense-sensor-alt { - alt_lid_accel: alt-lid-accel { - compatible = "cros-ec,bma4xx"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex_bma422>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_bma422>; - default-range = <2>; - drv-data = <&bma422_data>; - i2c-spi-addr-flags = "BMA4_I2C_ADDR_PRIMARY"; - alternate-for = <&lid_accel>; - alternate-ssfc-indicator = <&lid_sensor_1>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - alt_base_accel: alt-base-accel { - compatible = "cros-ec,bmi3xx-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex_bmi323>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_bmi323>; - drv-data = <&bmi323_data>; - alternate-for = <&base_accel>; - alternate-ssfc-indicator = <&base_sensor_1>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - alt_base_gyro: alt-base-gyro { - compatible = "cros-ec,bmi3xx-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex_bmi323>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_bmi323>; - drv-data = <&bmi323_data>; - alternate-for = <&base_gyro>; - alternate-ssfc-indicator = <&base_sensor_1>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&int_imu>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel>; - }; -}; diff --git a/zephyr/projects/nissa/craask/overlay.dtsi b/zephyr/projects/nissa/craask/overlay.dtsi deleted file mode 100644 index 257dc299e3..0000000000 --- a/zephyr/projects/nissa/craask/overlay.dtsi +++ /dev/null @@ -1,349 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - aliases { - gpio-cbi-wp = &gpio_ec_cbi_wp; - gpio-wp = &gpio_ec_wp_odl; - int-wp = &int_wp_l; - gpio-kbd-kso2 = &gpio_ec_kso_02_inv; - }; - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; - - batteries { - default_battery: lgc { - compatible = "lgc,ap18c8k", "battery-smart"; - }; - cosmx { - compatible = "cosmx,ap20cbl", "battery-smart"; - }; - cosmx-2 { - compatible = "cosmx,ap20cbl-2", "battery-smart"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-irqs = < - &int_power_button - &int_lid_open - >; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_power_button: power_button { - irq-pin = <&gpio_gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_wp_l: wp_l { - irq-pin = <&gpio_ec_wp_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_lid_open: lid_open { - irq-pin = <&gpio_lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_tablet_mode: tablet_mode { - irq-pin = <&gpio_tablet_mode_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "gmr_tablet_switch_isr"; - }; - int_imu: ec_imu { - irq-pin = <&gpio_imu_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "motion_interrupt"; - }; - int_vol_down: vol_down { - irq-pin = <&gpio_voldn_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_vol_up: vol_up { - irq-pin = <&gpio_volup_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_usb_c0: usb_c0 { - irq-pin = <&gpio_usb_c0_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_interrupt"; - }; - int_usb_c1: usb_c1 { - irq-pin = <&gpio_sb_1>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_interrupt"; - }; - }; - - named-gpios { - gpio_sb_1: sb-1 { - gpios = <&gpio0 2 GPIO_PULL_UP>; - no-auto-init; - }; - - gpio_sb_2: sb-2 { - gpios = <&gpiod 4 GPIO_OUTPUT>; - no-auto-init; - }; - - /* - * Set I2C pins for type C sub-board to be low voltage (I2C5_1). - * We do this for all boards, since the pins are 3.3V tolerant, - * and the only 2 types of sub-boards used on nivviks both have - * type-C ports on them. - */ - gpio_sb_3: sb-3 { - gpios = <&gpiof 4 (GPIO_OPEN_DRAIN | GPIO_VOLTAGE_1P8)>; - no-auto-init; - }; - gpio_sb_4: sb-4 { - gpios = <&gpiof 5 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - no-auto-init; - }; - ec-i2c-sensor-scl { - gpios = <&gpio9 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - ec-i2c-sensor-sda { - gpios = <&gpio8 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - }; - - /* - * Aliases used for sub-board GPIOs. - */ - aliases { - /* - * Input GPIO when used with type-C port 1 - * Output when used with HDMI sub-board - */ - gpio-usb-c1-int-odl = &gpio_sb_1; - gpio-en-rails-odl = &gpio_sb_1; - /* - * Sub-board with type A USB, enable. - */ - gpio-en-usb-a1-vbus = &gpio_sb_2; - /* - * HPD pins for HDMI sub-board. - */ - gpio-hdmi-en-odl = &gpio_sb_3; - gpio-hpd-odl = &gpio_sb_4; - /* - * Enable S5 rails for LTE sub-board - */ - gpio-en-sub-s5-rails = &gpio_sb_2; - }; - - temp_memory: memory { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_1>; - }; - temp_charger: charger { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_2>; - }; - temp_ambient: ambient { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_3>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - memory { - temp_host_high = <75>; - temp_host_halt = <85>; - temp_host_release_high = <70>; - temp_host_release_halt = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_memory>; - }; - charger { - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_charger>; - }; - ambient { - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_ambient>; - }; - }; - - usba { - compatible = "cros-ec,usba-port-enable-pins"; - /* - * sb_2 is only configured as GPIO when USB-A1 is present, - * but it's still safe to control when disabled. - * - * ILIM_SEL pins are referred to by legacy enum name, - * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on - * sub-boards that don't have USB-A so is safe to control - * regardless of system configuration. - */ - enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>; - status = "okay"; - }; - - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - chg = <&chg_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_0>; - }; - }; - port0-muxes { - virtual_mux_0: virtual-mux-0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - /* - * TODO(b:211693800): port1 may not be present on some - * sub-boards. - */ - port1@1 { - compatible = "named-usbc-port"; - reg = <1>; - bc12 = <&bc12_port1>; - chg = <&chg_port1>; - usb-mux-chain-1 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_1 &anx7483_mux_1>; - }; - usb_mux_chain_1_no_mux: usb-mux-chain-1-no-mux { - compatible = "cros-ec,usb-mux-chain"; - alternative-chain; - usb-muxes = <&virtual_mux_1>; - }; - }; - port1-muxes { - virtual_mux_1: virtual-mux-1 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - }; - - kblight { - compatible = "cros-ec,kblight-pwm"; - pwms = <&pwm6 6 PWM_HZ(2400) PWM_POLARITY_NORMAL>; - }; -}; - -&thermistor_3V3_51K1_47K_4050B { - status = "okay"; -}; - -&adc_ec_vsense_pp3300_s5 { - /* - * Voltage divider on input has 47k upper and 220k lower legs with - * 2714 mV full-scale reading on the ADC. Apply the largest possible - * multiplier (without overflowing int32) to get the best possible - * approximation of the actual ratio, but derate by a factor of two to - * ensure unexpectedly high values won't overflow. - */ - mul = <(791261 / 2)>; - div = <(651975 / 2)>; -}; - -/* Set bus speeds for I2C */ -&i2c0_0 { - label = "I2C_EEPROM"; - clock-frequency = <I2C_BITRATE_FAST>; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; -}; - -&i2c1_0 { - label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; -}; - -&i2c3_0 { - label = "I2C_USB_C0_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - /* - * BC1.2 interrupt is shared with TCPC, so - * IRQ is not specified here and handled by - * usb_c0_interrupt. - */ - }; - - chg_port0: isl923x@9 { - compatible = "intersil,isl923x"; - status = "okay"; - reg = <0x9>; - }; -}; - -&i2c5_1 { - label = "I2C_SUB_C1_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port1: isl923x@9 { - compatible = "intersil,isl923x"; - status = "okay"; - reg = <0x9>; - }; - - anx7483_mux_1: anx7483-mux-1@3e { - compatible = "analogix,anx7483"; - reg = <0x3e>; - board-set = "anx7483_set_default_tuning"; - }; -}; - -&i2c7_0 { - label = "I2C_BATTERY"; - clock-frequency = <I2C_BITRATE_STANDARD>; -}; - -&pwm6 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm6_gpc0>; - pinctrl-names = "default"; -}; - -/* host interface */ -&espi0 { - status = "okay"; - pinctrl-0 = <&espi_lpc_gp46_47_51_52_53_54_55_57>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/craask/power_signals.dtsi b/zephyr/projects/nissa/craask/power_signals.dtsi deleted file mode 100644 index 1d2b23069d..0000000000 --- a/zephyr/projects/nissa/craask/power_signals.dtsi +++ /dev/null @@ -1,220 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - chosen { - intel-ap-pwrseq,espi = &espi0; - }; - - common-pwrseq { - compatible = "intel,ap-pwrseq"; - - sys-pwrok-delay = <10>; - all-sys-pwrgd-timeout = <20>; - }; - - pwr-en-pp5000-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP5000_S5 enable output to regulator"; - enum-name = "PWR_EN_PP5000_A"; - gpios = <&gpio4 0 0>; - output; - }; - pwr-en-pp3300-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP3300_S5 enable output to LS"; - enum-name = "PWR_EN_PP3300_A"; - gpios = <&gpiob 6 0>; - output; - }; - pwr-pg-ec-rsmrst-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST power good from regulator"; - enum-name = "PWR_RSMRST"; - gpios = <&gpio9 4 0>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-pch-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST output to PCH"; - enum-name = "PWR_EC_PCH_RSMRST"; - gpios = <&gpioa 6 0>; - output; - }; - pwr-slp-s0-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S0_L input from PCH"; - enum-name = "PWR_SLP_S0"; - gpios = <&gpio9 7 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-s3-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S3_L input from PCH"; - enum-name = "PWR_SLP_S3"; - gpios = <&gpioa 5 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-sus-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_SUS_L input from PCH"; - enum-name = "PWR_SLP_SUS"; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-soc-dsw-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "DSW_PWROK output to PCH"; - enum-name = "PWR_EC_SOC_DSW_PWROK"; - gpios = <&gpio6 1 0>; - output; - }; - pwr-vccst-pwrgd-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VCCST_PWRGD output to PCH"; - enum-name = "PWR_VCCST_PWRGD"; - gpios = <&gpioa 4 GPIO_OPEN_DRAIN>; - output; - }; - pwr-imvp9-vrrdy-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VRRDY input from IMVP9"; - enum-name = "PWR_IMVP9_VRRDY"; - gpios = <&gpio4 3 0>; - }; - pwr-pch-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PCH_PWROK output to PCH"; - enum-name = "PWR_PCH_PWROK"; - gpios = <&gpio7 2 GPIO_OPEN_DRAIN>; - output; - }; - pwr-ec-pch-sys-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_PWROK output to PCH"; - enum-name = "PWR_EC_PCH_SYS_PWROK"; - gpios = <&gpio3 7 0>; - output; - }; - pwr-sys-rst-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_RESET# output to PCH"; - enum-name = "PWR_SYS_RST"; - gpios = <&gpioc 5 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; - output; - }; - pwr-slp-s4 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S4 virtual wire input from PCH"; - enum-name = "PWR_SLP_S4"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; - vw-invert; - }; - pwr-slp-s5 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S5 virtual wire input from PCH"; - enum-name = "PWR_SLP_S5"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; - vw-invert; - }; - pwr-all-sys-pwrgd { - compatible = "intel,ap-pwrseq-external"; - dbg-label = "Combined all power good"; - enum-name = "PWR_ALL_SYS_PWRGD"; - }; - pwr-adc-pp3300 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP3300 PWROK (from ADC)"; - enum-name = "PWR_DSW_PWROK"; - trigger-high = <&cmp_pp3300_s5_high>; - trigger-low = <&cmp_pp3300_s5_low>; - }; - pwr-adc-pp1p05 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP1P05 PWROK (from ADC)"; - enum-name = "PWR_PG_PP1P05"; - trigger-high = <&cmp_pp1p05_high>; - trigger-low = <&cmp_pp1p05_low>; - }; - - adc-cmp { - cmp_pp3300_s5_high: pp3300_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* - * This is 90% of nominal voltage considering voltage - * divider on ADC input. - */ - threshold-mv = <2448>; - }; - cmp_pp3300_s5_low: pp3300_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <2448>; - }; - cmp_pp1p05_high: pp1p05_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* Setting at 90% of nominal voltage */ - threshold-mv = <945>; - }; - cmp_pp1p05_low: pp1p05_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <945>; - }; - }; -}; - -/* - * Because the power signals directly reference the GPIOs, - * the correspinding named-gpios need to have no-auto-init set. - */ -&gpio_ec_soc_dsw_pwrok { - no-auto-init; -}; -&gpio_ec_soc_pch_pwrok_od { - no-auto-init; -}; -&gpio_ec_soc_rsmrst_l { - no-auto-init; -}; -&gpio_ec_soc_sys_pwrok { - no-auto-init; -}; -&gpio_ec_soc_vccst_pwrgd_od { - no-auto-init; -}; -&gpio_en_pp3300_s5 { - no-auto-init; -}; -&gpio_en_pp5000_s5 { - no-auto-init; -}; -&gpio_imvp91_vrrdy_od { - no-auto-init; -}; -&gpio_rsmrst_pwrgd_l { - no-auto-init; -}; -&gpio_slp_s0_l { - no-auto-init; -}; -&gpio_slp_s3_l { - no-auto-init; -}; -&gpio_slp_s4_l { - no-auto-init; -}; -&gpio_slp_sus_l { - no-auto-init; -}; -&gpio_sys_rst_odl { - no-auto-init; -}; diff --git a/zephyr/projects/nissa/craask/project.conf b/zephyr/projects/nissa/craask/project.conf deleted file mode 100644 index b7f31cee63..0000000000 --- a/zephyr/projects/nissa/craask/project.conf +++ /dev/null @@ -1,15 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_BOARD_CRAASK=y -CONFIG_PLATFORM_EC_OCPC=y - -# Sensor drivers -CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSO=y -CONFIG_PLATFORM_EC_ACCEL_BMA4XX=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI3XX=y -CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y - -CONFIG_PLATFORM_EC_BUTTONS_RUNTIME_CONFIG=y diff --git a/zephyr/projects/nissa/craask/project.overlay b/zephyr/projects/nissa/craask/project.overlay deleted file mode 100644 index 9ca681d979..0000000000 --- a/zephyr/projects/nissa/craask/project.overlay +++ /dev/null @@ -1,14 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "../cbi.dtsi" - -#include "cbi.dtsi" -#include "generated.dtsi" -#include "keyboard.dtsi" -#include "motionsense.dtsi" -#include "overlay.dtsi" -#include "power_signals.dtsi" -#include "pwm_leds.dtsi" diff --git a/zephyr/projects/nissa/craask/pwm_leds.dtsi b/zephyr/projects/nissa/craask/pwm_leds.dtsi deleted file mode 100644 index e55aa1c9ef..0000000000 --- a/zephyr/projects/nissa/craask/pwm_leds.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - pwmleds { - compatible = "pwm-leds"; - pwm_led0: pwm_led_0 { - pwms = <&pwm2 2 PWM_HZ(324) PWM_POLARITY_INVERTED>, - <&pwm0 0 PWM_HZ(324) PWM_POLARITY_INVERTED>, - <&pwm1 1 PWM_HZ(324) PWM_POLARITY_INVERTED>; - }; - }; - - cros-pwmleds { - compatible = "cros-ec,pwm-leds"; - - leds = <&pwm_led0>; - - /*<red green blue>*/ - color-map-red = <100 0 0>; - color-map-green = < 0 100 0>; - color-map-blue = < 0 0 100>; - color-map-yellow = < 0 50 50>; - color-map-white = <100 100 100>; - color-map-amber = < 90 10 0>; - - brightness-range = <100 100 100 0 0 0>; - - #address-cells = <1>; - #size-cells = <0>; - - pwm_led_0@0 { - reg = <0>; - ec-led-name = "EC_LED_ID_BATTERY_LED"; - }; - }; -}; - -/* Enable LEDs to work while CPU suspended */ - -&pwm0 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm0_gpc3>; - pinctrl-names = "default"; -}; - -&pwm1 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm1_gpc2>; - pinctrl-names = "default"; -}; - -&pwm2 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm2_gpc4>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/craask/src/charger.c b/zephyr/projects/nissa/craask/src/charger.c deleted file mode 100644 index d4723e4a0a..0000000000 --- a/zephyr/projects/nissa/craask/src/charger.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "battery.h" -#include "charger.h" -#include "charger/isl923x_public.h" -#include "console.h" -#include "extpower.h" -#include "usb_pd.h" -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = raa489000_is_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -/* - * Craask does not have a GPIO indicating whether extpower is present, - * so detect using the charger(s). - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; -} - -__override void board_hibernate(void) -{ - /* Shut down the chargers */ - if (board_get_usb_pd_port_count() == 2) - raa489000_hibernate(CHARGER_SECONDARY, true); - raa489000_hibernate(CHARGER_PRIMARY, true); - LOG_INF("Charger(s) hibernated"); - cflush(); -} diff --git a/zephyr/projects/nissa/craask/src/form_factor.c b/zephyr/projects/nissa/craask/src/form_factor.c deleted file mode 100644 index 59869eaa2f..0000000000 --- a/zephyr/projects/nissa/craask/src/form_factor.c +++ /dev/null @@ -1,121 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/devicetree.h> -#include <zephyr/logging/log.h> - -#include "accelgyro.h" -#include "button.h" -#include "cros_board_info.h" -#include "cros_cbi.h" -#include "driver/accelgyro_bmi323.h" -#include "driver/accelgyro_lsm6dso.h" -#include "gpio/gpio_int.h" -#include "hooks.h" -#include "motionsense_sensors.h" -#include "motion_sense.h" -#include "tablet_mode.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -/* - * Mainboard orientation support. - */ - -#define LIS_ALT_MAT SENSOR_ROT_STD_REF_NAME(DT_NODELABEL(lid_rot_bma422)) -#define BMA_ALT_MAT SENSOR_ROT_STD_REF_NAME(DT_NODELABEL(lid_rot_ref)) -#define ALT_MAT SENSOR_ROT_STD_REF_NAME(DT_NODELABEL(base_rot_ver1)) -#define LID_SENSOR SENSOR_ID(DT_NODELABEL(lid_accel)) -#define BASE_SENSOR SENSOR_ID(DT_NODELABEL(base_accel)) -#define BASE_GYRO SENSOR_ID(DT_NODELABEL(base_gyro)) -#define ALT_LID_S SENSOR_ID(DT_NODELABEL(alt_lid_accel)) - -static bool use_alt_sensor; - -void motion_interrupt(enum gpio_signal signal) -{ - if (use_alt_sensor) - bmi3xx_interrupt(signal); - else - lsm6dso_interrupt(signal); -} - -static void form_factor_init(void) -{ - int ret; - uint32_t val; - enum nissa_sub_board_type sb = nissa_get_sb_type(); - - ret = cbi_get_board_version(&val); - if (ret != EC_SUCCESS) { - LOG_ERR("Error retrieving CBI BOARD_VER."); - return; - } - /* - * The volume up/down button are exchanged on ver3 USB - * sub board. - * - * LTE: - * volup -> gpioa2, voldn -> gpio93 - * USB: - * volup -> gpio93, voldn -> gpioa2 - */ - if (val == 3 && sb == NISSA_SB_C_A) { - LOG_INF("Volume up/down btn exchanged on ver3 USB sku"); - buttons[BUTTON_VOLUME_UP].gpio = GPIO_VOLUME_DOWN_L; - buttons[BUTTON_VOLUME_DOWN].gpio = GPIO_VOLUME_UP_L; - } - - /* - * If the board version is 1 - * use ver1 rotation matrix. - */ - if (val == 1) { - LOG_INF("Switching to ver1 base"); - motion_sensors[BASE_SENSOR].rot_standard_ref = &ALT_MAT; - motion_sensors[BASE_GYRO].rot_standard_ref = &ALT_MAT; - } - - /* - * If the firmware config indicates - * an craaskbowl form factor, use the alternative - * rotation matrix. - */ - ret = cros_cbi_get_fw_config(FW_LID_INVERSION, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", - FW_LID_INVERSION); - return; - } - if (val == FW_LID_XY_ROT_180) { - LOG_INF("Lid sensor placement rotate 180 on xy plane"); - motion_sensors[LID_SENSOR].rot_standard_ref = &LIS_ALT_MAT; - motion_sensors_alt[ALT_LID_S].rot_standard_ref = &BMA_ALT_MAT; - } - - /* check which base sensor is used for motion_interrupt */ - use_alt_sensor = cros_cbi_ssfc_check_match( - CBI_SSFC_VALUE_ID(DT_NODELABEL(base_sensor_1))); - - motion_sensors_check_ssfc(); - - /* Check if it's clamshell or convertible */ - ret = cros_cbi_get_fw_config(FORM_FACTOR, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", FORM_FACTOR); - return; - } - if (val == CLAMSHELL) { - LOG_INF("Clamshell: disable motionsense function."); - motion_sensor_count = 0; - gmr_tablet_switch_disable(); - gpio_disable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_imu)); - gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_imu_int_l), - GPIO_DISCONNECTED); - } -} -DECLARE_HOOK(HOOK_INIT, form_factor_init, HOOK_PRIO_POST_I2C); diff --git a/zephyr/projects/nissa/craask/src/keyboard.c b/zephyr/projects/nissa/craask/src/keyboard.c deleted file mode 100644 index 65229eb43f..0000000000 --- a/zephyr/projects/nissa/craask/src/keyboard.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "ec_commands.h" - -static const struct ec_response_keybd_config craask_kb = { - .num_top_row_keys = 10, - .action_keys = { - TK_BACK, /* T1 */ - TK_REFRESH, /* T2 */ - TK_FULLSCREEN, /* T3 */ - TK_OVERVIEW, /* T4 */ - TK_SNAPSHOT, /* T5 */ - TK_BRIGHTNESS_DOWN, /* T6 */ - TK_BRIGHTNESS_UP, /* T7 */ - TK_VOL_MUTE, /* T8 */ - TK_VOL_DOWN, /* T9 */ - TK_VOL_UP, /* T10 */ - }, - .capabilities = KEYBD_CAP_SCRNLOCK_KEY, -}; - -__override const struct ec_response_keybd_config * -board_vivaldi_keybd_config(void) -{ - return &craask_kb; -} diff --git a/zephyr/projects/nissa/craask/src/led.c b/zephyr/projects/nissa/craask/src/led.c deleted file mode 100644 index 0af0202cf4..0000000000 --- a/zephyr/projects/nissa/craask/src/led.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery LED control for nissa - */ -#include "common.h" -#include "ec_commands.h" -#include "led_common.h" -#include "led_onoff_states.h" -#include "led_pwm.h" - -__override const int led_charge_lvl_1 = 5; -__override const int led_charge_lvl_2 = 97; -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_LVL_2] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_FULL_CHARGE] = { { EC_LED_COLOR_BLUE, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S0] = { { EC_LED_COLOR_BLUE, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S0_BAT_LOW] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S3] = { { EC_LED_COLOR_AMBER, - 1 * LED_ONE_SEC }, - { LED_OFF, 3 * LED_ONE_SEC } }, - [STATE_DISCHARGE_S5] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_BATTERY_ERROR] = { { EC_LED_COLOR_AMBER, - 1 * LED_ONE_SEC }, - { LED_OFF, 1 * LED_ONE_SEC } }, - [STATE_FACTORY_TEST] = { { EC_LED_COLOR_AMBER, - 2 * LED_ONE_SEC }, - { EC_LED_COLOR_BLUE, - 2 * LED_ONE_SEC } }, - }; - -__override void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_RED: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_RED); - break; - case EC_LED_COLOR_BLUE: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_BLUE); - break; - case EC_LED_COLOR_AMBER: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_AMBER); - break; - default: /* LED_OFF and other unsupported colors */ - set_pwm_led_color(EC_LED_ID_BATTERY_LED, -1); - break; - } -} diff --git a/zephyr/projects/nissa/craask/src/usbc.c b/zephyr/projects/nissa/craask/src/usbc.c deleted file mode 100644 index a15460a212..0000000000 --- a/zephyr/projects/nissa/craask/src/usbc.c +++ /dev/null @@ -1,277 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "charge_state_v2.h" -#include "chipset.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" -#include "driver/charger/isl923x_public.h" -#include "driver/retimer/anx7483_public.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/raa489000.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C0_TCPC, - .addr_flags = RAA489000_TCPC0_I2C_FLAGS, - }, - .drv = &raa489000_tcpm_drv, - /* RAA489000 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_VBUS_MONITOR, - }, - { /* sub-board */ - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C1_TCPC, - .addr_flags = RAA489000_TCPC0_I2C_FLAGS, - }, - .drv = &raa489000_tcpm_drv, - /* RAA489000 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_VBUS_MONITOR, - }, -}; - -int board_is_sourcing_vbus(int port) -{ - int regval; - - tcpc_read(port, TCPC_REG_POWER_STATUS, ®val); - return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS); -} - -int board_set_active_charge_port(int port) -{ - int is_real_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - int old_port; - - if (!is_real_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - old_port = charge_manager_get_active_charge_port(); - - LOG_INF("New chg p%d", port); - - /* Disable all ports. */ - if (port == CHARGE_PORT_NONE) { - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW); - raa489000_enable_asgate(i, false); - } - - return EC_SUCCESS; - } - - /* Check if port is sourcing VBUS. */ - if (board_is_sourcing_vbus(port)) { - LOG_WRN("Skip enable p%d", port); - return EC_ERROR_INVAL; - } - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - if (i == port) - continue; - - if (tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW)) - LOG_WRN("p%d: sink path disable failed.", i); - raa489000_enable_asgate(i, false); - } - - /* - * Stop the charger IC from switching while changing ports. Otherwise, - * we can overcurrent the adapter we're switching to. (crbug.com/926056) - */ - if (old_port != CHARGE_PORT_NONE) - charger_discharge_on_ac(1); - - /* Enable requested charge port. */ - if (raa489000_enable_asgate(port, true) || - tcpc_write(port, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_HIGH)) { - LOG_WRN("p%d: sink path enable failed.", port); - charger_discharge_on_ac(0); - return EC_ERROR_UNKNOWN; - } - - /* Allow the charger IC to begin/continue switching. */ - charger_discharge_on_ac(0); - - return EC_SUCCESS; -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - int regval; - - /* - * The interrupt line is shared between the TCPC and BC1.2 detector IC. - * Therefore, go out and actually read the alert registers to report the - * alert status. - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl))) { - if (!tcpc_read16(0, TCPC_REG_ALERT, ®val)) { - /* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */ - if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0)) - regval &= ~((1 << 14) | (1 << 13) | (1 << 12)); - - if (regval) - status |= PD_STATUS_TCPC_ALERT_0; - } - } - - if (board_get_usb_pd_port_count() == 2 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - if (!tcpc_read16(1, TCPC_REG_ALERT, ®val)) { - /* TCPCI spec Rev 1.0 says to ignore bits 14:12. */ - if (!(tcpc_config[1].flags & TCPC_FLAGS_TCPCI_REV2_0)) - regval &= ~((1 << 14) | (1 << 13) | (1 << 12)); - - if (regval) - status |= PD_STATUS_TCPC_ALERT_1; - } - } - - return status; -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS */ - tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - if (port < 0 || port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return; - - raa489000_set_output_current(port, rp); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - if (port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return EC_ERROR_INVAL; - - /* Disable charging. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW); - if (rv) - return rv; - - /* Our policy is not to source VBUS when the AP is off. */ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - return EC_ERROR_NOT_POWERED; - - /* Provide Vbus. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH); - if (rv) - return rv; - - rv = raa489000_enable_asgate(port, true); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -void board_reset_pd_mcu(void) -{ - /* - * TODO(b:147316511): could send a reset command to the TCPC here - * if needed. - */ -} - -/* - * Because the TCPCs and BC1.2 chips share interrupt lines, it's possible - * for an interrupt to be lost if one asserts the IRQ, the other does the same - * then the first releases it: there will only be one falling edge to trigger - * the interrupt, and the line will be held low. We handle this by running a - * deferred check after a falling edge to see whether the IRQ is still being - * asserted. If it is, we assume an interrupt may have been lost and we need - * to poll each chip for events again. - */ -#define USBC_INT_POLL_DELAY_US 5000 - -static void poll_c0_int(void); -DECLARE_DEFERRED(poll_c0_int); -static void poll_c1_int(void); -DECLARE_DEFERRED(poll_c1_int); - -static void usbc_interrupt_trigger(int port) -{ - schedule_deferred_pd_interrupt(port); - usb_charger_task_set_event(port, USB_CHG_EVENT_BC12); -} - -static inline void poll_usb_gpio(int port, const struct gpio_dt_spec *gpio, - const struct deferred_data *ud) -{ - if (!gpio_pin_get_dt(gpio)) { - usbc_interrupt_trigger(port); - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); - } -} - -static void poll_c0_int(void) -{ - poll_usb_gpio(0, GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl), - &poll_c0_int_data); -} - -static void poll_c1_int(void) -{ - poll_usb_gpio(1, GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl), - &poll_c1_int_data); -} - -void usb_interrupt(enum gpio_signal signal) -{ - int port; - const struct deferred_data *ud; - - if (signal == GPIO_SIGNAL(DT_NODELABEL(gpio_usb_c0_int_odl))) { - port = 0; - ud = &poll_c0_int_data; - } else { - port = 1; - ud = &poll_c1_int_data; - } - /* - * We've just been called from a falling edge, so there's definitely - * no lost IRQ right now. Cancel any pending check. - */ - hook_call_deferred(ud, -1); - /* Trigger polling of TCPC and BC1.2 in respective tasks */ - usbc_interrupt_trigger(port); - /* Check for lost interrupts in a bit */ - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); -} diff --git a/zephyr/projects/nissa/include/nissa_common.h b/zephyr/projects/nissa/include/nissa_common.h deleted file mode 100644 index 7cdaba2e50..0000000000 --- a/zephyr/projects/nissa/include/nissa_common.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Nissa common declarations */ - -#ifndef __CROS_EC_NISSA_NISSA_COMMON_H__ -#define __CROS_EC_NISSA_NISSA_COMMON_H__ - -#include "usb_mux.h" - -enum nissa_sub_board_type { - NISSA_SB_UNKNOWN = -1, /* Uninitialised */ - NISSA_SB_NONE = 0, /* No board defined */ - NISSA_SB_C_A = 1, /* USB type C, USB type A */ - NISSA_SB_C_LTE = 2, /* USB type C, WWAN LTE */ - NISSA_SB_HDMI_A = 3, /* HDMI, USB type A */ -}; - -enum nissa_sub_board_type nissa_get_sb_type(void); - -#endif /* __CROS_EC_NISSA_NISSA_COMMON_H__ */ diff --git a/zephyr/projects/nissa/include/nissa_hdmi.h b/zephyr/projects/nissa/include/nissa_hdmi.h deleted file mode 100644 index 9f2f533ba7..0000000000 --- a/zephyr/projects/nissa/include/nissa_hdmi.h +++ /dev/null @@ -1,55 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Nissa shared HDMI sub-board functionality */ - -#ifndef __CROS_EC_NISSA_NISSA_HDMI_H__ -#define __CROS_EC_NISSA_NISSA_HDMI_H__ - -#include "common.h" - -/** True if the board supports an HDMI sub-board. */ -#define NISSA_BOARD_HAS_HDMI_SUPPORT DT_NODE_EXISTS(DT_NODELABEL(gpio_hdmi_sel)) - -/** - * Configure the GPIO that controls core rails on the HDMI sub-board. - * - * This is the gpio_en_rails_odl pin, which is configured as active-low - * open-drain output to enable power to the HDMI sub-board (typically when the - * AP is in S5 or above). - * - * This function must be called if the pin is connected to the HDMI board and - * power is not enabled by default. - */ -void nissa_configure_hdmi_rails(void); - -/** - * Configure the GPIO that controls the HDMI VCC pin on the HDMI sub-board. - * - * This is the gpio_hdmi_en_odl pin, which is configured as active-low - * open-drain output to enable the VCC pin on the HDMI connector (typically when - * the AP is on, in S0 or S0ix). - * - * This function must be called if the pin is connected to the HDMI board and - * VCC is not enabled by default. - */ -void nissa_configure_hdmi_vcc(void); - -/** - * Configure the GPIOS controlling HDMI sub-board power (core rails and VCC). - * - * This function is called from shared code while configuring sub-boards, and - * used if an HDMI sub-board is present. The default implementation enables the - * core rails control pin (nissa_configure_hdmi_rails) but not VCC - * (nissa_configure_hdmi_vcc), assuming that the pin for VCC is not connected - * connected on most boards (and that VCC will be turned on whenever the core - * rails are turned on). - * - * A board should override this function if it needs to enable more IOs for - * HDMI, or if some pins need to be conditionally enabled. - */ -__override_proto void nissa_configure_hdmi_power_gpios(void); - -#endif /* __CROS_EC_NISSA_NISSA_HDMI_H__ */ diff --git a/zephyr/projects/nissa/it8xxx2_program.conf b/zephyr/projects/nissa/it8xxx2_program.conf deleted file mode 100644 index 3272c04209..0000000000 --- a/zephyr/projects/nissa/it8xxx2_program.conf +++ /dev/null @@ -1,62 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_FLASH_IT8XXX2=y -CONFIG_CROS_SYSTEM_IT8XXX2=y -CONFIG_ESPI_IT8XXX2=y -CONFIG_FPU=y -# rv32iafc/ilp32f is not supported by the toolchain, so use soft-float -CONFIG_FLOAT_HARD=n - -# EC performance is bad; limiting sensor data rate helps keep it from degrading -# so much that it causes problems. b/240485526, b/230818312 -CONFIG_PLATFORM_EC_MAX_SENSOR_FREQ_MILLIHZ=100000 - -# Allow more time for the charger to stabilise -CONFIG_PLATFORM_EC_POWER_BUTTON_INIT_TIMEOUT=5 - -# ITE has more space, so don't restrict shell -CONFIG_SHELL_MINIMAL=n - -# RAM savings, since this chip is tight on available RAM. -# It's useful to store a lot of logs for the host to request, but the default 4k -# is pretty large. -CONFIG_PLATFORM_EC_HOSTCMD_CONSOLE_BUF_SIZE=2048 -# Our threads have short names, save 20 bytes per thread -CONFIG_THREAD_MAX_NAME_LEN=12 -# Task stacks, tuned by experiment. Most expanded to prevent overflow, and a few -# shrunk to save RAM. -CONFIG_AP_PWRSEQ_STACK_SIZE=1408 -CONFIG_TASK_HOSTCMD_STACK_SIZE=1280 -CONFIG_TASK_MOTIONSENSE_STACK_SIZE=1280 -CONFIG_TASK_PD_INT_STACK_SIZE=1280 - -# TCPC+PPC: ITE on-chip for C0, PS8745 for optional C1 -CONFIG_PLATFORM_EC_USB_PD_TCPM_ITE_ON_CHIP=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_DRIVER_IT8XXX2=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8745=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_CHARGER=y -# SM5803 controls power path on both ports -CONFIG_PLATFORM_EC_USB_PD_5V_CHARGER_CTRL=y -# SM5803 can discharge VBUS, but not via one of the available options; -# pd_power_supply_reset() does discharge. -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE=n -# The EC is put into programming mode while firmware is running -# (after releasing reset) and PD after being reset will hard-reset -# the port if a contract was already set up. If the system has no -# battery, this will prevent programming because it will brown out -# the system and reset. Inserting a delay gives the programmer more -# time to put the EC into programming mode. -CONFIG_PLATFORM_EC_USB_PD_STARTUP_DELAY_MS=2000 - -# Charger driver and configuration -CONFIG_PLATFORM_EC_OCPC=y -CONFIG_PLATFORM_EC_CHARGER_SM5803=y -CONFIG_PLATFORM_EC_OCPC_DEF_RBATT_MOHMS=21 -CONFIG_PLATFORM_EC_PD_MAX_VOLTAGE_MV=15000 - -# VSENSE: PP3300_S5 & PP1050_PROC -CONFIG_VCMP_IT8XXX2=y -CONFIG_SENSOR=y -CONFIG_SENSOR_SHELL=n diff --git a/zephyr/projects/nissa/joxer/cbi.dtsi b/zephyr/projects/nissa/joxer/cbi.dtsi deleted file mode 100644 index afbd125b32..0000000000 --- a/zephyr/projects/nissa/joxer/cbi.dtsi +++ /dev/null @@ -1,32 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - nissa-fw-config { - compatible = "cros-ec,cbi-fw-config"; - - /* - * FW_CONFIG field to indicate which keyboard layout - * should be used. - */ - keyboard { - enum-name = "FW_KB_LAYOUT"; - start = <3>; - size = <2>; - - layout-1 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_LAYOUT_DEFAULT"; - value = <0>; - default; - }; - layout-2 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_LAYOUT_US2"; - value = <1>; - }; - }; - }; -}; diff --git a/zephyr/projects/nissa/joxer/generated.dtsi b/zephyr/projects/nissa/joxer/generated.dtsi deleted file mode 100644 index 22214b9726..0000000000 --- a/zephyr/projects/nissa/joxer/generated.dtsi +++ /dev/null @@ -1,260 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * This file is auto-generated - do not edit! - */ - -/ { - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ec_vsense_pp1050_proc: ec_vsense_pp1050_proc { - enum-name = "ADC_PP1050_PROC"; - io-channels = <&adc0 14>; - }; - adc_ec_vsense_pp3300_s5: ec_vsense_pp3300_s5 { - enum-name = "ADC_PP3300_S5"; - io-channels = <&adc0 0>; - }; - adc_temp_sensor_1: temp_sensor_1 { - enum-name = "ADC_TEMP_SENSOR_1"; - io-channels = <&adc0 2>; - }; - adc_temp_sensor_2: temp_sensor_2 { - enum-name = "ADC_TEMP_SENSOR_2"; - io-channels = <&adc0 3>; - }; - adc_temp_sensor_3: temp_sensor_3 { - enum-name = "ADC_TEMP_SENSOR_3"; - io-channels = <&adc0 13>; - }; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_acc_int_l: acc_int_l { - gpios = <&gpioc 0 GPIO_INPUT>; - }; - gpio_all_sys_pwrgd: all_sys_pwrgd { - gpios = <&gpiob 7 GPIO_INPUT>; - }; - gpio_ccd_mode_odl: ccd_mode_odl { - gpios = <&gpioh 5 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - gpio_cpu_c10_gate_l: cpu_c10_gate_l { - gpios = <&gpiog 1 GPIO_INPUT>; - }; - gpio_ec_battery_pres_odl: ec_battery_pres_odl { - gpios = <&gpioi 4 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - gpio_ec_cbi_wp: ec_cbi_wp { - gpios = <&gpioj 5 GPIO_OUTPUT>; - }; - gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - gpios = <&gpiok 4 GPIO_ODR_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_entering_rw: ec_entering_rw { - gpios = <&gpioc 7 GPIO_OUTPUT>; - enum-name = "GPIO_ENTERING_RW"; - }; - gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - gpios = <&gpioh 1 GPIO_OUTPUT>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_odl { - gpios = <&gpiob 2 GPIO_ODR_LOW>; - }; - gpio_ec_prochot_odl: ec_prochot_odl { - gpios = <&gpioi 1 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - gpios = <&gpiol 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_hdmi_hpd: ec_soc_hdmi_hpd { - gpios = <&gpiok 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_int_odl: ec_soc_int_odl { - gpios = <&gpiod 5 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - gpios = <&gpiod 6 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - gpios = <&gpiob 6 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - gpios = <&gpioh 0 GPIO_OUTPUT>; - }; - gpio_ec_soc_rtcrst: ec_soc_rtcrst { - gpios = <&gpiok 2 GPIO_OUTPUT>; - }; - gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - gpios = <&gpiof 2 GPIO_OUTPUT>; - }; - gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - gpios = <&gpioe 5 GPIO_ODR_HIGH>; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpioa 6 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_en_kb_bl: en_kb_bl { - gpios = <&gpioj 3 GPIO_OUTPUT>; - enum-name = "GPIO_EN_KEYBOARD_BACKLIGHT"; - }; - gpio_en_pp3300_s5: en_pp3300_s5 { - gpios = <&gpioc 5 GPIO_OUTPUT>; - enum-name = "GPIO_TEMP_SENSOR_POWER"; - }; - gpio_en_pp5000_pen_x: en_pp5000_pen_x { - gpios = <&gpiob 5 GPIO_OUTPUT>; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpiok 5 GPIO_OUTPUT>; - }; - gpio_en_slp_z: en_slp_z { - gpios = <&gpiok 3 GPIO_OUTPUT>; - }; - gpio_en_usb_a0_vbus: en_usb_a0_vbus { - gpios = <&gpiol 6 GPIO_OUTPUT>; - }; - gpio_en_usb_c0_cc1_vconn: en_usb_c0_cc1_vconn { - gpios = <&gpioh 4 GPIO_OUTPUT>; - }; - gpio_en_usb_c0_cc2_vconn: en_usb_c0_cc2_vconn { - gpios = <&gpioh 6 GPIO_OUTPUT>; - }; - gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpioe 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_hdmi_sel: hdmi_sel { - gpios = <&gpioc 6 GPIO_OUTPUT>; - }; - gpio_imu_int_l: imu_int_l { - gpios = <&gpioj 0 GPIO_INPUT>; - }; - gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - gpios = <&gpioj 4 GPIO_INPUT>; - }; - gpio_lid_open: lid_open { - gpios = <&gpiof 3 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_pen_detect_odl: pen_detect_odl { - gpios = <&gpioj 1 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - gpios = <&gpiod 3 GPIO_INPUT>; - }; - gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - gpios = <&gpioe 3 GPIO_INPUT>; - }; - gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - gpios = <&gpioe 1 GPIO_INPUT_PULL_UP>; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpioe 4 GPIO_INPUT>; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioh 3 GPIO_INPUT>; - }; - gpio_slp_s4_l: slp_s4_l { - gpios = <&gpioi 5 GPIO_INPUT>; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpiog 2 GPIO_INPUT>; - }; - gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - gpios = <&gpiof 1 GPIO_OUTPUT>; - enum-name = "GPIO_USB2_ILIM_SEL"; - }; - gpio_sys_rst_odl: sys_rst_odl { - gpios = <&gpiod 1 GPIO_ODR_HIGH>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpioj 7 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - gpios = <&gpiol 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB1_ILIM_SEL"; - }; - gpio_usb_c0_frs: usb_c0_frs { - gpios = <&gpioc 4 GPIO_OUTPUT>; - }; - gpio_usb_c0_int_odl: usb_c0_int_odl { - gpios = <&gpiok 0 GPIO_INPUT_PULL_UP>; - }; - gpio_vccin_aux_vid0: vccin_aux_vid0 { - gpios = <&gpiod 0 GPIO_INPUT>; - }; - gpio_vccin_aux_vid1: vccin_aux_vid1 { - gpios = <&gpiok 1 GPIO_INPUT>; - }; - gpio_voldn_btn_odl: voldn_btn_odl { - gpios = <&gpioi 6 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_volup_btn_odl: volup_btn_odl { - gpios = <&gpioi 7 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - }; - - named-i2c-ports { - compatible = "named-i2c-ports"; - - i2c_ec_i2c_eeprom: ec_i2c_eeprom { - i2c-port = <&i2c0>; - enum-names = "I2C_PORT_EEPROM"; - }; - i2c_ec_i2c_batt: ec_i2c_batt { - i2c-port = <&i2c1>; - enum-names = "I2C_PORT_BATTERY"; - }; - i2c_ec_i2c_sensor: ec_i2c_sensor { - i2c-port = <&i2c2>; - enum-names = "I2C_PORT_SENSOR"; - }; - i2c_ec_i2c_sub_usb_c1: ec_i2c_sub_usb_c1 { - i2c-port = <&i2c4>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - }; - i2c_ec_i2c_usb_c0: ec_i2c_usb_c0 { - i2c-port = <&i2c5>; - enum-names = "I2C_PORT_USB_C0_TCPC"; - }; - }; -}; - -&adc0 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/joxer/joxer_vif.xml b/zephyr/projects/nissa/joxer/joxer_vif.xml deleted file mode 100644 index cfbce5623a..0000000000 --- a/zephyr/projects/nissa/joxer/joxer_vif.xml +++ /dev/null @@ -1,346 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?> -<vif:VIF xmlns:opt="http://usb.org/VendorInfoFileOptionalContent.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:vif="http://usb.org/VendorInfoFile.xsd"> - <vif:VIF_Specification>3.20</vif:VIF_Specification> - <vif:VIF_App> - <vif:Vendor>USB-IF</vif:Vendor> - <vif:Name>VIF Editor</vif:Name> - <vif:Version>3.3.0.0</vif:Version> - </vif:VIF_App> - <vif:Vendor_Name>Google</vif:Vendor_Name> - <vif:Model_Part_Number>Joxer</vif:Model_Part_Number> - <vif:Product_Revision>1</vif:Product_Revision> - <vif:TID>0</vif:TID> - <vif:VIF_Product_Type value="0">Port Product</vif:VIF_Product_Type> - <vif:Certification_Type value="1">Reference Platform</vif:Certification_Type> - <vif:Product> - <!--Product Level Content:--> - </vif:Product> - <vif:Component> - <!--Component 0: Port 0--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Component--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Port_Label>0</vif:Port_Label> - <vif:Connector_Type value="2">Type-C®</vif:Connector_Type> - <vif:USB4_Supported value="false" /> - <vif:USB_PD_Support value="true" /> - <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type> - <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine> - <vif:Port_Battery_Powered value="true" /> - <vif:BC_1_2_Support value="3">Both</vif:BC_1_2_Support> - <vif:Captive_Cable value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;General PD--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:PD_Spec_Revision_Major value="3" /> - <vif:PD_Spec_Revision_Minor value="1" /> - <vif:PD_Spec_Version_Major value="1" /> - <vif:PD_Spec_Version_Minor value="3" /> - <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision> - <vif:SOP_Capable value="true" /> - <vif:SOP_P_Capable value="true" /> - <vif:SOP_PP_Capable value="true" /> - <vif:SOP_P_Debug_Capable value="false" /> - <vif:SOP_PP_Debug_Capable value="false" /> - <vif:Manufacturer_Info_Supported_Port value="false" /> - <vif:Chunking_Implemented_SOP value="true" /> - <vif:Unchunked_Extended_Messages_Supported value="false" /> - <vif:Security_Msgs_Supported_SOP value="false" /> - <vif:Unconstrained_Power value="false" /> - <vif:Num_Fixed_Batteries value="1" /> - <vif:Num_Swappable_Battery_Slots value="1" /> - <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;PD Capabilities--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:USB_Comms_Capable value="true" /> - <vif:DR_Swap_To_DFP_Supported value="true" /> - <vif:DR_Swap_To_UFP_Supported value="false" /> - <vif:VCONN_Swap_To_On_Supported value="true" /> - <vif:VCONN_Swap_To_Off_Supported value="true" /> - <vif:Responds_To_Discov_SOP_UFP value="false" /> - <vif:Responds_To_Discov_SOP_DFP value="true" /> - <vif:Attempts_Discov_SOP value="true" /> - <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available> - <vif:Data_Reset_Supported value="false" /> - <vif:Enter_USB_Supported value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;USB Type-C®--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Type_C_Can_Act_As_Host value="true" /> - <vif:Type_C_Can_Act_As_Device value="false" /> - <vif:Type_C_Implements_Try_SRC value="true" /> - <vif:Type_C_Implements_Try_SNK value="false" /> - <vif:Type_C_Supports_Audio_Accessory value="false" /> - <vif:Type_C_Is_VCONN_Powered_Accessory value="false" /> - <vif:Type_C_Is_Debug_Target_SRC value="true" /> - <vif:Type_C_Is_Debug_Target_SNK value="true" /> - <vif:RP_Value value="1">1.5A</vif:RP_Value> - <vif:Type_C_Port_On_Hub value="false" /> - <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source> - <vif:Type_C_Sources_VCONN value="true" /> - <vif:Type_C_Is_Alt_Mode_Controller value="true" /> - <vif:Type_C_Is_Alt_Mode_Adapter value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Product Power--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW> - <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;USB Host--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Host_Supports_USB_Data value="true" /> - <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed> - <vif:Host_Contains_Captive_Retimer value="false" /> - <vif:Host_Truncates_DP_For_tDHPResponse value="false" /> - <vif:Host_Is_Embedded value="false" /> - <vif:Host_Suspend_Supported value="true" /> - <vif:Is_DFP_On_Hub value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Battery Charging 1.2--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;PD Source--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source> - <vif:EPR_Supported_As_Src value="false" /> - <vif:USB_Suspend_May_Be_Cleared value="false" /> - <vif:Sends_Pings value="false" /> - <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink> - <vif:Master_Port value="false" /> - <vif:Num_Src_PDOs value="1" /> - <vif:PD_OC_Protection value="true" /> - <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method> - <!--Bundle: SrcPdoList--> - <vif:SrcPdoList> - <vif:SrcPDO> - <!--Source PDO 1--> - <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type> - <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current> - <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage> - <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current> - <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce> - <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold> - </vif:SrcPDO> - </vif:SrcPdoList> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;PD Sink--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:PD_Power_As_Sink value="45000">45000 mW</vif:PD_Power_As_Sink> - <vif:EPR_Supported_As_Snk value="false" /> - <vif:No_USB_Suspend_May_Be_Set value="true" /> - <vif:GiveBack_May_Be_Set value="false" /> - <vif:Higher_Capability_Set value="false" /> - <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source> - <vif:Num_Snk_PDOs value="3" /> - <!--Bundle: SnkPdoList--> - <vif:SnkPdoList> - <vif:SnkPDO> - <!--Sink PDO 1--> - <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type> - <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage> - <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current> - </vif:SnkPDO> - <vif:SnkPDO> - <!--Sink PDO 2--> - <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type> - <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power> - <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage> - <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage> - </vif:SnkPDO> - <vif:SnkPDO> - <!--Sink PDO 3--> - <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type> - <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage> - <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage> - <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current> - </vif:SnkPDO> - </vif:SnkPdoList> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Dual Role--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Accepts_PR_Swap_As_Src value="true" /> - <vif:Accepts_PR_Swap_As_Snk value="true" /> - <vif:Requests_PR_Swap_As_Src value="true" /> - <vif:Requests_PR_Swap_As_Snk value="true" /> - <vif:FR_Swap_Supported_As_Initial_Sink value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;SOP Discover ID--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:XID_SOP value="0" /> - <vif:Data_Capable_As_USB_Host_SOP value="true" /> - <vif:Data_Capable_As_USB_Device_SOP value="false" /> - <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP> - <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP> - <vif:DFP_VDO_Port_Number value="0" /> - <vif:Modal_Operation_Supported_SOP value="false" /> - <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP> - <vif:PID_SOP value="20570">505A</vif:PID_SOP> - <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP> - </vif:Component> - <vif:Component> - <!--Component 1: Port 1--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Component--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Port_Label>1</vif:Port_Label> - <vif:Connector_Type value="2">Type-C®</vif:Connector_Type> - <vif:USB4_Supported value="false" /> - <vif:USB_PD_Support value="true" /> - <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type> - <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine> - <vif:Port_Battery_Powered value="true" /> - <vif:BC_1_2_Support value="3">Both</vif:BC_1_2_Support> - <vif:Captive_Cable value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;General PD--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:PD_Spec_Revision_Major value="3" /> - <vif:PD_Spec_Revision_Minor value="1" /> - <vif:PD_Spec_Version_Major value="1" /> - <vif:PD_Spec_Version_Minor value="3" /> - <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision> - <vif:SOP_Capable value="true" /> - <vif:SOP_P_Capable value="true" /> - <vif:SOP_PP_Capable value="true" /> - <vif:SOP_P_Debug_Capable value="false" /> - <vif:SOP_PP_Debug_Capable value="false" /> - <vif:Manufacturer_Info_Supported_Port value="false" /> - <vif:Chunking_Implemented_SOP value="true" /> - <vif:Unchunked_Extended_Messages_Supported value="false" /> - <vif:Security_Msgs_Supported_SOP value="false" /> - <vif:Unconstrained_Power value="false" /> - <vif:Num_Fixed_Batteries value="1" /> - <vif:Num_Swappable_Battery_Slots value="1" /> - <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;PD Capabilities--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:USB_Comms_Capable value="true" /> - <vif:DR_Swap_To_DFP_Supported value="true" /> - <vif:DR_Swap_To_UFP_Supported value="false" /> - <vif:VCONN_Swap_To_On_Supported value="true" /> - <vif:VCONN_Swap_To_Off_Supported value="true" /> - <vif:Responds_To_Discov_SOP_UFP value="false" /> - <vif:Responds_To_Discov_SOP_DFP value="true" /> - <vif:Attempts_Discov_SOP value="true" /> - <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available> - <vif:Data_Reset_Supported value="false" /> - <vif:Enter_USB_Supported value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;USB Type-C®--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Type_C_Can_Act_As_Host value="true" /> - <vif:Type_C_Can_Act_As_Device value="false" /> - <vif:Type_C_Implements_Try_SRC value="true" /> - <vif:Type_C_Implements_Try_SNK value="false" /> - <vif:Type_C_Supports_Audio_Accessory value="false" /> - <vif:Type_C_Is_VCONN_Powered_Accessory value="false" /> - <vif:Type_C_Is_Debug_Target_SRC value="true" /> - <vif:Type_C_Is_Debug_Target_SNK value="true" /> - <vif:RP_Value value="1">1.5A</vif:RP_Value> - <vif:Type_C_Port_On_Hub value="false" /> - <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source> - <vif:Type_C_Sources_VCONN value="true" /> - <vif:Type_C_Is_Alt_Mode_Controller value="true" /> - <vif:Type_C_Is_Alt_Mode_Adapter value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Product Power--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW> - <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;USB Host--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Host_Supports_USB_Data value="true" /> - <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed> - <vif:Host_Contains_Captive_Retimer value="true" /> - <vif:Host_Truncates_DP_For_tDHPResponse value="false" /> - <vif:Host_Is_Embedded value="false" /> - <vif:Host_Suspend_Supported value="true" /> - <vif:Is_DFP_On_Hub value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Battery Charging 1.2--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;PD Source--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source> - <vif:EPR_Supported_As_Src value="false" /> - <vif:USB_Suspend_May_Be_Cleared value="false" /> - <vif:Sends_Pings value="false" /> - <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink> - <vif:Master_Port value="false" /> - <vif:Num_Src_PDOs value="1" /> - <vif:PD_OC_Protection value="true" /> - <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method> - <!--Bundle: SrcPdoList--> - <vif:SrcPdoList> - <vif:SrcPDO> - <!--Source PDO 1--> - <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type> - <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current> - <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage> - <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current> - <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce> - <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold> - </vif:SrcPDO> - </vif:SrcPdoList> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;PD Sink--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:PD_Power_As_Sink value="45000">45000 mW</vif:PD_Power_As_Sink> - <vif:EPR_Supported_As_Snk value="false" /> - <vif:No_USB_Suspend_May_Be_Set value="true" /> - <vif:GiveBack_May_Be_Set value="false" /> - <vif:Higher_Capability_Set value="false" /> - <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source> - <vif:Num_Snk_PDOs value="3" /> - <!--Bundle: SnkPdoList--> - <vif:SnkPdoList> - <vif:SnkPDO> - <!--Sink PDO 1--> - <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type> - <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage> - <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current> - </vif:SnkPDO> - <vif:SnkPDO> - <!--Sink PDO 2--> - <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type> - <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power> - <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage> - <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage> - </vif:SnkPDO> - <vif:SnkPDO> - <!--Sink PDO 3--> - <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type> - <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage> - <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage> - <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current> - </vif:SnkPDO> - </vif:SnkPdoList> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;Dual Role--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:Accepts_PR_Swap_As_Src value="true" /> - <vif:Accepts_PR_Swap_As_Snk value="true" /> - <vif:Requests_PR_Swap_As_Src value="true" /> - <vif:Requests_PR_Swap_As_Snk value="true" /> - <vif:FR_Swap_Supported_As_Initial_Sink value="false" /> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <!--;SOP Discover ID--> - <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--> - <vif:XID_SOP value="0" /> - <vif:Data_Capable_As_USB_Host_SOP value="true" /> - <vif:Data_Capable_As_USB_Device_SOP value="false" /> - <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP> - <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP> - <vif:DFP_VDO_Port_Number value="1" /> - <vif:Modal_Operation_Supported_SOP value="false" /> - <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP> - <vif:PID_SOP value="20570">505A</vif:PID_SOP> - <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP> - </vif:Component> -</vif:VIF>
\ No newline at end of file diff --git a/zephyr/projects/nissa/joxer/keyboard.dtsi b/zephyr/projects/nissa/joxer/keyboard.dtsi deleted file mode 100644 index 04a620767a..0000000000 --- a/zephyr/projects/nissa/joxer/keyboard.dtsi +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - kblight { - compatible = "cros-ec,kblight-pwm"; - /* - * Use 324 Hz so that 32Khz clock source is used, - * which is not gated in power saving mode. - */ - pwms = <&pwm0 0 PWM_HZ(324) PWM_POLARITY_NORMAL>; - }; -}; - -&pwm0 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm0_gpa0_default>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/joxer/motionsense.dtsi b/zephyr/projects/nissa/joxer/motionsense.dtsi deleted file mode 100644 index 537cc34451..0000000000 --- a/zephyr/projects/nissa/joxer/motionsense.dtsi +++ /dev/null @@ -1,149 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * Interrupt bindings for sensor devices. - */ - bmi3xx-int = &base_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - lid_mutex: lid-mutex { - }; - - base_mutex: base-mutex { - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <0 (-1) 0 - (-1) 0 0 - 0 0 (-1)>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <1 0 0 - 0 1 0 - 0 0 1>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - bmi323_data: bmi323-drv-data { - compatible = "cros-ec,drvdata-bmi3xx"; - status = "okay"; - }; - - bma422_data: bma422-drv-data { - compatible = "cros-ec,drvdata-bma4xx"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The nodelabel "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - * TODO(b/238139272): The first entries of the array must be - * accelerometers,then gyroscope. Fix this dependency in the DTS - * processing which makes the devicetree entries independent. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,bma4xx"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&bma422_data>; - i2c-spi-addr-flags = "BMA4_I2C_ADDR_SECONDARY"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,bmi3xx-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi323_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_gyro: base-gyro { - compatible = "cros-ec,bmi3xx-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi323_data>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&int_imu>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel>; - }; -}; diff --git a/zephyr/projects/nissa/joxer/overlay.dtsi b/zephyr/projects/nissa/joxer/overlay.dtsi deleted file mode 100644 index b587da8fb1..0000000000 --- a/zephyr/projects/nissa/joxer/overlay.dtsi +++ /dev/null @@ -1,445 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - aliases { - gpio-cbi-wp = &gpio_ec_cbi_wp; - gpio-wp = &gpio_ec_wp_odl; - int-wp = &int_wp_l; - /* - * USB-C: interrupt input. - * I2C pins are on i2c_ec_i2c_sub_usb_c1 - */ - gpio-usb-c1-int-odl = &gpio_sb_1; - /* - * USB-A: VBUS enable output - * LTE: power enable output - */ - gpio-en-usb-a1-vbus = &gpio_sb_2; - /* - * HDMI: power enable output, HDMI enable output, - * and HPD input - */ - gpio-en-rails-odl = &gpio_sb_1; - gpio-hdmi-en-odl = &gpio_sb_4; - gpio-hpd-odl = &gpio_sb_3; - /* - * Enable S5 rails for LTE sub-board - */ - gpio-en-sub-s5-rails = &gpio_sb_2; - }; - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; - - batteries { - default_battery: cosmx { - compatible = "cosmx,gh02047xl", "battery-smart"; - }; - dynapack_atl_gh02047xl { - compatible = "dynapack,atl_gh02047xl", "battery-smart"; - }; - dynapack_cosmx_gh02047xl { - compatible = "dynapack,cosmx_gh02047xl", "battery-smart"; - }; - smp_coslight_gh02047xl { - compatible = "smp,coslight_gh02047xl", "battery-smart"; - }; - smp_highpower_gh02047xl { - compatible = "smp,highpower_gh02047xl", "battery-smart"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-irqs = < - &int_power_button - &int_lid_open - >; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_power_button: power_button { - irq-pin = <&gpio_gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_vol_down: vol_down { - irq-pin = <&gpio_voldn_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_vol_up: vol_up { - irq-pin = <&gpio_volup_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_wp_l: wp_l { - irq-pin = <&gpio_ec_wp_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_lid_open: lid_open { - irq-pin = <&gpio_lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_tablet_mode: tablet_mode { - irq-pin = <&gpio_tablet_mode_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "gmr_tablet_switch_isr"; - }; - int_imu: ec_imu { - irq-pin = <&gpio_imu_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "bmi3xx_interrupt"; - }; - int_usb_c0: usb_c0 { - irq-pin = <&gpio_usb_c0_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_c0_interrupt"; - }; - int_usb_c1: usb_c1 { - irq-pin = <&gpio_sb_1>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_c1_interrupt"; - }; - }; - - unused-pins { - compatible = "unused-gpios"; - unused-gpios = <&gpioc 3 0>, - <&gpiod 4 0>, - <&gpioh 2 0>, - <&gpiol 4 0>; - }; - - named-gpios { - /* - * EC doesn't take any specific action on CC/SBU disconnect due to - * fault, but this definition is useful for hardware testing. - */ - gpio_usb_c0_prot_fault_odl: usb_c0_prot_fault_odl { - gpios = <&gpiok 6 GPIO_INPUT_PULL_UP>; - }; - - gpio_sb_1: sb_1 { - gpios = <&gpioe 6 0>; - no-auto-init; - }; - gpio_sb_2: sb_2 { - gpios = <&gpiof 0 0>; - no-auto-init; - }; - - gpio_sb_3: sb_3 { - gpios = <&gpioe 7 0>; - no-auto-init; - }; - gpio_sb_4: sb_4 { - gpios = <&gpioe 0 0>; - no-auto-init; - }; - gpio_fan_enable: fan-enable { - gpios = <&gpiol 4 GPIO_OUTPUT>; - no-auto-init; - }; - gpio_power_led_gate: power_led_gate { - gpios = <&gpiof 1 GPIO_OUTPUT_LOW>; - }; - gpio_led_1_odl: led_1_odl { - gpios = <&gpioa 1 GPIO_OUTPUT_HIGH>; - }; - gpio_led_2_odl: led_2_odl { - gpios = <&gpioa 2 GPIO_OUTPUT_HIGH>; - }; - gpio_led_3_l: led_3_l { - gpios = <&gpiol 2 GPIO_OUTPUT_HIGH>; - }; - gpio_led_4_l: led_4_l { - gpios = <&gpiol 3 GPIO_OUTPUT_HIGH>; - }; - }; - - temp_memory: memory { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_1>; - }; - temp_charger: charger { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_2>; - }; - temp_ambient: ambient { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_3>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - memory { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_memory>; - }; - charger { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_charger>; - }; - ambient { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_ambient>; - }; - }; - - usba { - compatible = "cros-ec,usba-port-enable-pins"; - /* - * sb_2 is only configured as GPIO when USB-A1 is present, - * but it's still safe to control when disabled. - * - * ILIM_SEL pins are referred to by legacy enum name, - * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on - * sub-boards that don't have USB-A so is safe to control - * regardless of system configuration. - */ - enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>; - status = "okay"; - }; - - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - chg = <&chg_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_0>; - }; - }; - port0-muxes { - virtual_mux_0: virtual-mux-0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - port1@1 { - compatible = "named-usbc-port"; - reg = <1>; - bc12 = <&bc12_port1>; - chg = <&chg_port1>; - usb-mux-chain-1 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_1 &tcpci_mux_1>; - }; - usb_mux_chain_1_no_mux: usb-mux-chain-1-no-mux { - compatible = "cros-ec,usb-mux-chain"; - alternative-chain; - usb-muxes = <&virtual_mux_1>; - }; - }; - port1-muxes { - virtual_mux_1: virtual-mux-1 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - tcpci_mux_1: tcpci-mux-1 { - compatible = "parade,usbc-mux-ps8xxx"; - }; - }; - }; - fans { - compatible = "cros-ec,fans"; - - fan_0 { - pwms = <&pwm7 PWM_CHANNEL_7 PWM_KHZ(30) PWM_POLARITY_NORMAL>; - tach = <&tach1>; - rpm_min = <1500>; - rpm_start = <1500>; - rpm_max = <6500>; - enable_gpio = <&gpio_fan_enable>; - }; - }; -}; - -&gpio_acc_int_l { - gpios = <&gpioc 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; -&gpio_imu_int_l { - gpios = <&gpioj 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; -&gpio_vccin_aux_vid0 { - gpios = <&gpiod 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; -&gpio_vccin_aux_vid1 { - gpios = <&gpiok 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; - -&gpio_ec_prochot_odl { - gpios = <&gpioi 1 (GPIO_ODR_HIGH | GPIO_VOLTAGE_1P8)>; -}; - -&thermistor_3V3_51K1_47K_4050B { - status = "okay"; -}; - -&adc_ec_vsense_pp3300_s5 { - /* - * Voltage divider on input has 47k upper and 220k lower legs with 3 V - * full-scale reading on the ADC. Apply the largest possible multiplier - * (without overflowing int32) to get the best possible approximation - * of the actual ratio, but derate by a factor of two to ensure - * unexpectedly high values won't overflow. - */ - mul = <(715828 / 2)>; - div = <(589820 / 2)>; -}; - -&adc0 { - pinctrl-0 = <&adc0_ch0_gpi0_default - &adc0_ch2_gpi2_default - &adc0_ch3_gpi3_default - &adc0_ch13_gpl0_default - &adc0_ch14_gpl1_default>; - pinctrl-names = "default"; -}; - -&pinctrl { - i2c2_clk_gpf6_default: i2c2_clk_gpf6_default { - gpio-voltage = "1v8"; - }; - i2c2_data_gpf7_default: i2c2_data_gpf7_default { - gpio-voltage = "1v8"; - }; -}; - - -&i2c0 { - label = "I2C_EEPROM"; - clock-frequency = <I2C_BITRATE_FAST>; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; - pinctrl-0 = <&i2c0_clk_gpb3_default - &i2c0_data_gpb4_default>; - pinctrl-names = "default"; -}; - -&i2c1 { - label = "I2C_BATTERY"; - clock-frequency = <50000>; - pinctrl-0 = <&i2c1_clk_gpc1_default - &i2c1_data_gpc2_default>; - pinctrl-names = "default"; -}; - -&i2c2 { - label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c2_clk_gpf6_default - &i2c2_data_gpf7_default>; - pinctrl-names = "default"; -}; - -&i2c4 { - label = "I2C_SUB_C1_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c4_clk_gpe0_default - &i2c4_data_gpe7_default>; - pinctrl-names = "default"; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port1: sm5803@32 { - compatible = "siliconmitus,sm5803"; - status = "okay"; - reg = <0x32>; - }; -}; - -&i2c_ec_i2c_sub_usb_c1 { - /* - * Dynamic speed setting is used for AP-controlled firmware update - * of PS8745 TCPC/redriver: the AP lowers speed to 400 kHz in order - * to use more efficient window programming, then sets it back when - * done. - */ - dynamic-speed; -}; - -&i2c5 { - label = "I2C_USB_C0_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c5_clk_gpa4_default - &i2c5_data_gpa5_default>; - pinctrl-names = "default"; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port0: sm5803@32 { - compatible = "siliconmitus,sm5803"; - status = "okay"; - reg = <0x32>; - }; -}; - -/* pwm for fan */ -&pwm7 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C6>; - pinctrl-0 = <&pwm7_gpa7_default>; - pinctrl-names = "default"; -}; - -/* fan tachometer sensor */ -&tach1 { - status = "okay"; - channel = <IT8XXX2_TACH_CHANNEL_A>; - pulses-per-round = <2>; - pinctrl-0 = <&tach1a_gpd7_default>; - pinctrl-names = "default"; -}; - -&usbpd0 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/joxer/power_signals.dtsi b/zephyr/projects/nissa/joxer/power_signals.dtsi deleted file mode 100644 index 8affae03b1..0000000000 --- a/zephyr/projects/nissa/joxer/power_signals.dtsi +++ /dev/null @@ -1,223 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - chosen { - intel-ap-pwrseq,espi = &espi0; - }; - - common-pwrseq { - compatible = "intel,ap-pwrseq"; - - sys-pwrok-delay = <10>; - all-sys-pwrgd-timeout = <20>; - }; - - pwr-en-pp5000-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP5000_S5 enable output to regulator"; - enum-name = "PWR_EN_PP5000_A"; - gpios = <&gpiok 5 0>; - output; - }; - pwr-en-pp3300-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP3300_S5 enable output to LS"; - enum-name = "PWR_EN_PP3300_A"; - gpios = <&gpioc 5 0>; - output; - }; - pwr-pg-ec-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST power good from regulator"; - enum-name = "PWR_RSMRST"; - gpios = <&gpioe 1 0>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-pch-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST output to PCH"; - enum-name = "PWR_EC_PCH_RSMRST"; - gpios = <&gpioh 0 0>; - output; - }; - pwr-slp-s0-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S0_L input from PCH"; - enum-name = "PWR_SLP_S0"; - gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-s3-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S3_L input from PCH"; - enum-name = "PWR_SLP_S3"; - gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-sus-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_SUS_L input from PCH"; - enum-name = "PWR_SLP_SUS"; - gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-soc-dsw-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "DSW_PWROK output to PCH"; - enum-name = "PWR_EC_SOC_DSW_PWROK"; - gpios = <&gpiol 7 0>; - output; - }; - pwr-vccst-pwrgd-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VCCST_PWRGD output to PCH"; - enum-name = "PWR_VCCST_PWRGD"; - gpios = <&gpioe 5 (GPIO_OPEN_DRAIN | GPIO_VOLTAGE_1P8)>; - output; - }; - pwr-imvp9-vrrdy-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VRRDY input from IMVP9"; - enum-name = "PWR_IMVP9_VRRDY"; - gpios = <&gpioj 4 0>; - }; - pwr-pch-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PCH_PWROK output to PCH"; - enum-name = "PWR_PCH_PWROK"; - gpios = <&gpiod 6 GPIO_OPEN_DRAIN>; - output; - }; - pwr-ec-pch-sys-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_PWROK output to PCH"; - enum-name = "PWR_EC_PCH_SYS_PWROK"; - gpios = <&gpiof 2 0>; - output; - }; - pwr-sys-rst-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_RESET# output to PCH"; - enum-name = "PWR_SYS_RST"; - gpios = <&gpiod 1 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; - output; - }; - pwr-slp-s4 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S4 virtual wire input from PCH"; - enum-name = "PWR_SLP_S4"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; - vw-invert; - }; - pwr-slp-s5 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S5 virtual wire input from PCH"; - enum-name = "PWR_SLP_S5"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; - vw-invert; - }; - pwr-all-sys-pwrgd { - /* - * This is a board level signal, since this - * signal needs some special processing. - */ - compatible = "intel,ap-pwrseq-external"; - dbg-label = "Combined all power good"; - enum-name = "PWR_ALL_SYS_PWRGD"; - }; - pwr-adc-pp3300 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP3300_PROC"; - enum-name = "PWR_DSW_PWROK"; - trigger-high = <&vcmp0>; - trigger-low = <&vcmp1>; - }; - pwr-adc-pp1p05 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP1P05_PROC"; - enum-name = "PWR_PG_PP1P05"; - trigger-high = <&vcmp2>; - trigger-low = <&vcmp3>; - }; - -}; - -/* - * Because the power signals directly reference the GPIOs, - * the correspinding named-gpios need to have no-auto-init set. - */ -&gpio_ec_soc_dsw_pwrok { - no-auto-init; -}; -&gpio_ec_soc_pch_pwrok_od { - no-auto-init; -}; -&gpio_ec_soc_rsmrst_l { - no-auto-init; -}; -&gpio_ec_soc_sys_pwrok { - no-auto-init; -}; -&gpio_ec_soc_vccst_pwrgd_od { - no-auto-init; -}; -&gpio_en_pp3300_s5 { - no-auto-init; -}; -&gpio_en_pp5000_s5 { - no-auto-init; -}; -&gpio_imvp91_vrrdy_od { - no-auto-init; -}; -&gpio_rsmrst_pwrgd_l { - no-auto-init; -}; -&gpio_slp_s0_l { - no-auto-init; -}; -&gpio_slp_s3_l { - no-auto-init; -}; -&gpio_slp_sus_l { - no-auto-init; -}; -&gpio_sys_rst_odl { - no-auto-init; -}; -&vcmp0 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_GREATER>; - /* - * This is 90% of nominal voltage considering voltage - * divider on ADC input. - */ - threshold-mv = <2448>; - io-channels = <&adc0 0>; -}; -&vcmp1 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_LESS_OR_EQUAL>; - threshold-mv = <2448>; - io-channels = <&adc0 0>; -}; -&vcmp2 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_GREATER>; - /* Setting at 90% of nominal voltage */ - threshold-mv = <945>; - io-channels = <&adc0 14>; -}; -&vcmp3 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_LESS_OR_EQUAL>; - threshold-mv = <945>; - io-channels = <&adc0 14>; -}; diff --git a/zephyr/projects/nissa/joxer/project.conf b/zephyr/projects/nissa/joxer/project.conf deleted file mode 100644 index a0de72294c..0000000000 --- a/zephyr/projects/nissa/joxer/project.conf +++ /dev/null @@ -1,19 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_BOARD_JOXER=y - -# Ensure recovery key combination (esc+refresh+power) is reliable: b/236580049 -CONFIG_PLATFORM_EC_KEYBOARD_PWRBTN_ASSERTS_KSI3=y -CONFIG_PLATFORM_EC_KEYBOARD_REFRESH_ROW3=y - -# Sensor drivers -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI3XX=y -CONFIG_PLATFORM_EC_ACCEL_BMA4XX=y -CONFIG_PLATFORM_EC_MAX_SENSOR_FREQ_MILLIHZ=100000 - -# LED -CONFIG_PLATFORM_EC_LED_PWM=n -CONFIG_PLATFORM_EC_LED_COMMON=y diff --git a/zephyr/projects/nissa/joxer/project.overlay b/zephyr/projects/nissa/joxer/project.overlay deleted file mode 100644 index 9ca681d979..0000000000 --- a/zephyr/projects/nissa/joxer/project.overlay +++ /dev/null @@ -1,14 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "../cbi.dtsi" - -#include "cbi.dtsi" -#include "generated.dtsi" -#include "keyboard.dtsi" -#include "motionsense.dtsi" -#include "overlay.dtsi" -#include "power_signals.dtsi" -#include "pwm_leds.dtsi" diff --git a/zephyr/projects/nissa/joxer/pwm_leds.dtsi b/zephyr/projects/nissa/joxer/pwm_leds.dtsi deleted file mode 100644 index aa4a76b271..0000000000 --- a/zephyr/projects/nissa/joxer/pwm_leds.dtsi +++ /dev/null @@ -1,60 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - pwmleds { - compatible = "pwm-leds"; - pwm_led0: pwm_led_0 { - pwms = <&pwm1 1 PWM_HZ(1296) PWM_POLARITY_INVERTED>, - <&pwm2 2 PWM_HZ(1296) PWM_POLARITY_INVERTED>, - <&pwm3 3 PWM_HZ(1296) PWM_POLARITY_INVERTED>; - }; - }; - - cros-pwmleds { - compatible = "cros-ec,pwm-leds"; - - leds = <&pwm_led0>; - - /*<red green blue>*/ - color-map-red = <100 0 0>; - color-map-green = < 0 100 0>; - color-map-blue = < 0 0 100>; - color-map-yellow = < 0 50 50>; - color-map-white = <100 100 100>; - color-map-amber = <100 15 0>; - - brightness-range = <100 100 100 0 0 0>; - - #address-cells = <1>; - #size-cells = <0>; - - pwm_led_0@0 { - reg = <0>; - ec-led-name = "EC_LED_ID_BATTERY_LED"; - }; - }; -}; - -&pwm1 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm1_gpa1_default>; - pinctrl-names = "default"; -}; - -&pwm2 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm2_gpa2_default>; - pinctrl-names = "default"; -}; - -&pwm3 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm3_gpa3_default>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/joxer/src/charger.c b/zephyr/projects/nissa/joxer/src/charger.c deleted file mode 100644 index b9454d8b80..0000000000 --- a/zephyr/projects/nissa/joxer/src/charger.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "battery.h" -#include "charger.h" -#include "console.h" -#include "driver/charger/sm5803.h" -#include "extpower.h" -#include "usb_pd.h" -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = sm5803_is_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -/* - * Joxer not have a GPIO indicating whether extpower is present, - * so detect using the charger(s). - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; -} - -__override void board_hibernate(void) -{ - /* Shut down the chargers */ - if (board_get_usb_pd_port_count() == 2) - sm5803_hibernate(CHARGER_SECONDARY); - sm5803_hibernate(CHARGER_PRIMARY); - LOG_INF("Charger(s) hibernated"); - cflush(); -} diff --git a/zephyr/projects/nissa/joxer/src/fan.c b/zephyr/projects/nissa/joxer/src/fan.c deleted file mode 100644 index 6d234b2fc3..0000000000 --- a/zephyr/projects/nissa/joxer/src/fan.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/devicetree.h> -#include <zephyr/drivers/gpio.h> -#include <zephyr/logging/log.h> - -#include "cros_cbi.h" -#include "fan.h" -#include "gpio/gpio.h" -#include "hooks.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -/* - * Joxer fan support - */ -static void fan_init(void) -{ - int ret; - uint32_t val; - /* - * Retrieve the fan config. - */ - ret = cros_cbi_get_fw_config(FW_FAN, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", FW_FAN); - return; - } - if (val != FW_FAN_PRESENT) { - /* Disable the fan */ - fan_set_count(0); - } else { - /* Configure the fan enable GPIO */ - gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_fan_enable), - GPIO_OUTPUT); - } -} -DECLARE_HOOK(HOOK_INIT, fan_init, HOOK_PRIO_POST_FIRST); diff --git a/zephyr/projects/nissa/joxer/src/keyboard.c b/zephyr/projects/nissa/joxer/src/keyboard.c deleted file mode 100644 index 48db40f53f..0000000000 --- a/zephyr/projects/nissa/joxer/src/keyboard.c +++ /dev/null @@ -1,68 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/devicetree.h> -#include <zephyr/drivers/gpio.h> -#include <zephyr/logging/log.h> - -#include "cros_cbi.h" -#include "ec_commands.h" -#include "gpio/gpio.h" -#include "hooks.h" -#include "keyboard_8042_sharedlib.h" -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -static const struct ec_response_keybd_config joxer_kb_legacy = { - .num_top_row_keys = 13, - .action_keys = { - TK_BACK, /* T1 */ - TK_REFRESH, /* T2 */ - TK_FULLSCREEN, /* T3 */ - TK_OVERVIEW, /* T4 */ - TK_SNAPSHOT, /* T5 */ - TK_BRIGHTNESS_DOWN, /* T6 */ - TK_BRIGHTNESS_UP, /* T7 */ - TK_KBD_BKLIGHT_TOGGLE, /* T8 */ - TK_PLAY_PAUSE, /* T9 */ - TK_MICMUTE, /* T10 */ - TK_VOL_MUTE, /* T11 */ - TK_VOL_DOWN, /* T12 */ - TK_VOL_UP, /* T13 */ - }, - .capabilities = KEYBD_CAP_SCRNLOCK_KEY, -}; - -__override const struct ec_response_keybd_config * -board_vivaldi_keybd_config(void) -{ - return &joxer_kb_legacy; -} - -/* - * Keyboard layout decided by FW config. - */ -static void kb_layout_init(void) -{ - int ret; - uint32_t val; - /* - * Retrieve the kb layout config. - */ - ret = cros_cbi_get_fw_config(FW_KB_LAYOUT, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", - FW_KB_LAYOUT); - return; - } - /* - * If keyboard is US2(FW_KB_LAYOUT_US2), we need translate right ctrl - * to backslash(\|) key. - */ - if (val == FW_KB_LAYOUT_US2) - set_scancode_set2(4, 0, get_scancode_set2(2, 7)); -} -DECLARE_HOOK(HOOK_INIT, kb_layout_init, HOOK_PRIO_POST_FIRST); diff --git a/zephyr/projects/nissa/joxer/src/led.c b/zephyr/projects/nissa/joxer/src/led.c deleted file mode 100644 index d66e5b27a6..0000000000 --- a/zephyr/projects/nissa/joxer/src/led.c +++ /dev/null @@ -1,181 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery LED control for nissa - */ -#include <stdint.h> - -#include "charge_manager.h" -#include "common.h" -#include "compile_time_macros.h" -#include "ec_commands.h" -#include "gpio.h" -#include "led_common.h" -#include "led_onoff_states.h" -#include "pwm.h" -#include "util.h" - -#define BAT_LED_ON_LVL 0 -#define BAT_LED_OFF_LVL 1 - -#define PWR_LED_ON_LVL 1 -#define PWR_LED_OFF_LVL 0 - -#define LED_SIDESEL_MB_PORT 0 -#define LED_SIDESEL_DB_PORT 1 - -__override const int led_charge_lvl_1 = 5; -__override const int led_charge_lvl_2 = 95; - -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_LVL_2] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_FULL_CHARGE] = { { EC_LED_COLOR_WHITE, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S0] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_DISCHARGE_S0_BAT_LOW] = { { EC_LED_COLOR_AMBER, - 1 * LED_ONE_SEC }, - { LED_OFF, 1 * LED_ONE_SEC } }, - [STATE_DISCHARGE_S3] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_DISCHARGE_S5] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_BATTERY_ERROR] = { { EC_LED_COLOR_AMBER, - 0.5 * LED_ONE_SEC }, - { LED_OFF, 0.5 * LED_ONE_SEC } }, - [STATE_FACTORY_TEST] = { { EC_LED_COLOR_WHITE, - 1 * LED_ONE_SEC }, - { LED_OFF, 1 * LED_ONE_SEC } }, - }; - -__override const struct led_descriptor - led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = { - [PWR_LED_STATE_ON] = { { EC_LED_COLOR_WHITE, LED_INDEFINITE } }, - [PWR_LED_STATE_SUSPEND_AC] = { { EC_LED_COLOR_WHITE, - 1 * LED_ONE_SEC }, - { LED_OFF, 1 * LED_ONE_SEC } }, - [PWR_LED_STATE_SUSPEND_NO_AC] = { { EC_LED_COLOR_WHITE, - 1 * LED_ONE_SEC }, - { LED_OFF, - 1 * LED_ONE_SEC } }, - [PWR_LED_STATE_OFF] = { { LED_OFF, LED_INDEFINITE } }, - }; - -const enum ec_led_id supported_led_ids[] = { - EC_LED_ID_BATTERY_LED, - EC_LED_ID_POWER_LED, -}; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -__override void led_set_color_battery(enum ec_led_colors color) -{ - int port; - - /* There are four battery leds, LED1/LED2 are on MB side and - * LED3/LED4 are on DB side. All leds are OFF by default. - */ - int led1, led2, led3, led4; - - led1 = led2 = led3 = led4 = BAT_LED_OFF_LVL; - - /* Check which port is the charging port, - * and turn on the corresponding led. - */ - if (led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) { - port = charge_manager_get_active_charge_port(); - switch (port) { - case LED_SIDESEL_MB_PORT: - switch (color) { - case EC_LED_COLOR_AMBER: - led1 = BAT_LED_ON_LVL; - break; - case EC_LED_COLOR_WHITE: - led2 = BAT_LED_ON_LVL; - break; - default: /* LED_OFF and other unsupported colors */ - break; - } - break; - case LED_SIDESEL_DB_PORT: - switch (color) { - case EC_LED_COLOR_AMBER: - led3 = BAT_LED_ON_LVL; - break; - case EC_LED_COLOR_WHITE: - led4 = BAT_LED_ON_LVL; - break; - default: /* LED_OFF and other unsupported colors */ - break; - } - break; - default: /* Unknown charging port */ - break; - } - } else { - switch (color) { - case EC_LED_COLOR_AMBER: - led1 = BAT_LED_ON_LVL; - led3 = BAT_LED_ON_LVL; - break; - case EC_LED_COLOR_WHITE: - led2 = BAT_LED_ON_LVL; - led4 = BAT_LED_ON_LVL; - break; - default: /* LED_OFF and other unsupported colors */ - break; - } - } - - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_1_odl), led1); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_2_odl), led2); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_3_l), led3); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_4_l), led4); -} - -__override void led_set_color_power(enum ec_led_colors color) -{ - if (color == EC_LED_COLOR_WHITE) - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_power_led_gate), - PWR_LED_ON_LVL); - else - /* LED_OFF and unsupported colors */ - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_power_led_gate), - PWR_LED_OFF_LVL); -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - brightness_range[EC_LED_COLOR_AMBER] = 1; - brightness_range[EC_LED_COLOR_WHITE] = 1; - } else if (led_id == EC_LED_ID_POWER_LED) { - brightness_range[EC_LED_COLOR_WHITE] = 1; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - led_auto_control(led_id, 0); - if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(EC_LED_COLOR_AMBER); - else if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_battery(EC_LED_COLOR_WHITE); - else if (brightness[LED_OFF] != 0) - led_set_color_battery(LED_OFF); - else { - led_auto_control(led_id, 1); - led_set_color_battery(LED_OFF); - } - } else if (led_id == EC_LED_ID_POWER_LED) { - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_power(EC_LED_COLOR_WHITE); - else - led_set_color_power(LED_OFF); - } - - return EC_SUCCESS; -} diff --git a/zephyr/projects/nissa/joxer/src/usbc.c b/zephyr/projects/nissa/joxer/src/usbc.c deleted file mode 100644 index 5fec9ab544..0000000000 --- a/zephyr/projects/nissa/joxer/src/usbc.c +++ /dev/null @@ -1,392 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> -#include <ap_power/ap_power.h> - -#include "charge_state_v2.h" -#include "chipset.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" -#include "driver/charger/sm5803.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/tcpm/ps8xxx_public.h" -#include "driver/tcpm/tcpci.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, - { - /* - * Sub-board: optional PS8745 TCPC+redriver. Behaves the same - * as PS8815. - */ - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C1_TCPC, - .addr_flags = PS8XXX_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - /* PS8745 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0, - }, -}; - -/* Vconn control for integrated ITE TCPC */ -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ - /* Vconn control is only for port 0 */ - if (port) - return; - - if (cc_pin == USBPD_CC_PIN_1) - gpio_pin_set_dt( - GPIO_DT_FROM_NODELABEL(gpio_en_usb_c0_cc1_vconn), - !!enabled); - else - gpio_pin_set_dt( - GPIO_DT_FROM_NODELABEL(gpio_en_usb_c0_cc2_vconn), - !!enabled); -} - -__override bool pd_check_vbus_level(int port, enum vbus_level level) -{ - return sm5803_check_vbus_level(port, level); -} - -/* - * Putting chargers into LPM when in suspend reduces power draw by about 8mW - * per charger, but also seems critical to correct operation in source mode: - * if chargers are not in LPM when a sink is first connected, VBUS sourcing - * works even if the partner is later removed (causing LPM entry) and - * reconnected (causing LPM exit). If in LPM initially, sourcing VBUS - * consistently causes the charger to report (apparently spurious) overcurrent - * failures. - * - * In short, this is important to making things work correctly but we don't - * understand why. - */ -static void board_chargers_suspend(struct ap_power_ev_callback *const cb, - const struct ap_power_ev_data data) -{ - void (*fn)(int chgnum); - - switch (data.event) { - case AP_POWER_SUSPEND: - fn = sm5803_enable_low_power_mode; - break; - case AP_POWER_RESUME: - fn = sm5803_disable_low_power_mode; - break; - default: - LOG_WRN("%s: power event %d is not recognized", __func__, - data.event); - return; - } - - fn(CHARGER_PRIMARY); - if (board_get_charger_chip_count() > 1) - fn(CHARGER_SECONDARY); -} - -static int board_chargers_suspend_init(const struct device *unused) -{ - static struct ap_power_ev_callback cb = { - .handler = board_chargers_suspend, - .events = AP_POWER_SUSPEND | AP_POWER_RESUME, - }; - ap_power_ev_add_callback(&cb); - return 0; -} -SYS_INIT(board_chargers_suspend_init, APPLICATION, 0); - -int board_set_active_charge_port(int port) -{ - int is_real_port = (port >= 0 && port < board_get_usb_pd_port_count()); - int i; - int old_port; - int rv; - - if (!is_real_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - old_port = charge_manager_get_active_charge_port(); - LOG_INF("Charge update: p%d -> p%d", old_port, port); - - /* Check if port is sourcing VBUS. */ - if (port != CHARGE_PORT_NONE && charger_is_sourcing_otg_power(port)) { - LOG_WRN("Skip enable p%d: already sourcing", port); - return EC_ERROR_INVAL; - } - - /* Disable sinking on all ports except the desired one */ - for (i = 0; i < board_get_usb_pd_port_count(); i++) { - if (i == port) - continue; - - if (sm5803_vbus_sink_enable(i, 0)) - /* - * Do not early-return because this can fail during - * power-on which would put us into a loop. - */ - LOG_WRN("p%d: sink path disable failed.", i); - } - - /* Don't enable anything (stop here) if no ports were requested */ - if ((port == CHARGE_PORT_NONE) || (old_port == port)) - return EC_SUCCESS; - - /* - * Stop the charger IC from switching while changing ports. Otherwise, - * we can overcurrent the adapter we're switching to. (crbug.com/926056) - */ - if (old_port != CHARGE_PORT_NONE) - charger_discharge_on_ac(1); - - /* Enable requested charge port. */ - rv = sm5803_vbus_sink_enable(port, 1); - if (rv) - LOG_WRN("p%d: sink path enable failed: code %d", port, rv); - - /* Allow the charger IC to begin/continue switching. */ - charger_discharge_on_ac(0); - - return rv; -} - -uint16_t tcpc_get_alert_status(void) -{ - /* - * TCPC 0 is embedded in the EC and processes interrupts in the chip - * code (it83xx/intc.c). This function only needs to poll port C1 if - * present. - */ - uint16_t status = 0; - int regval; - - /* Is the C1 port present and its IRQ line asserted? */ - if (board_get_usb_pd_port_count() == 2 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - /* - * C1 IRQ is shared between BC1.2 and TCPC; poll TCPC to see if - * it asserted the IRQ. - */ - if (!tcpc_read16(1, TCPC_REG_ALERT, ®val)) { - if (regval) - status = PD_STATUS_TCPC_ALERT_1; - } - } - - return status; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - if (port < 0 || port >= board_get_usb_pd_port_count()) - return; - - prev_en = charger_is_sourcing_otg_power(port); - - /* Disable Vbus */ - charger_enable_otg_power(port, 0); - - /* Discharge Vbus if previously enabled */ - if (prev_en) - sm5803_set_vbus_disch(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - enum ec_error_list rv; - - if (port < 0 || port > board_get_usb_pd_port_count()) { - LOG_WRN("Port C%d does not exist, cannot enable VBUS", port); - return EC_ERROR_INVAL; - } - - /* Disable sinking */ - rv = sm5803_vbus_sink_enable(port, 0); - if (rv) { - LOG_WRN("C%d failed to disable sinking: %d", port, rv); - return rv; - } - - /* Disable Vbus discharge */ - rv = sm5803_set_vbus_disch(port, 0); - if (rv) { - LOG_WRN("C%d failed to clear VBUS discharge: %d", port, rv); - return rv; - } - - /* Provide Vbus */ - rv = charger_enable_otg_power(port, 1); - if (rv) { - LOG_WRN("C%d failed to enable VBUS sourcing: %d", port, rv); - return rv; - } - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - int rv; - const int current = rp == TYPEC_RP_3A0 ? 3000 : 1500; - - rv = charger_set_otg_current_voltage(port, current, 5000); - if (rv != EC_SUCCESS) { - LOG_WRN("Failed to set source ilimit on port %d to %d: %d", - port, current, rv); - } -} - -void board_reset_pd_mcu(void) -{ - /* - * Do nothing. The integrated TCPC for C0 lacks a dedicated reset - * command, and C1 (if present) doesn't have a reset pin connected - * to the EC. - */ -} - -#define INT_RECHECK_US 5000 - -/* C0 interrupt line shared by BC 1.2 and charger */ - -static void check_c0_line(void); -DECLARE_DEFERRED(check_c0_line); - -static void notify_c0_chips(void) -{ - usb_charger_task_set_event(0, USB_CHG_EVENT_BC12); - sm5803_interrupt(0); -} - -static void check_c0_line(void) -{ - /* - * If line is still being held low, see if there's more to process from - * one of the chips - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl))) { - notify_c0_chips(); - hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); - } -} - -void usb_c0_interrupt(enum gpio_signal s) -{ - /* Cancel any previous calls to check the interrupt line */ - hook_call_deferred(&check_c0_line_data, -1); - - /* Notify all chips using this line that an interrupt came in */ - notify_c0_chips(); - - /* Check the line again in 5ms */ - hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); -} - -/* C1 interrupt line shared by BC 1.2, TCPC, and charger */ -static void check_c1_line(void); -DECLARE_DEFERRED(check_c1_line); - -static void notify_c1_chips(void) -{ - schedule_deferred_pd_interrupt(1); - usb_charger_task_set_event(1, USB_CHG_EVENT_BC12); - /* Charger is handled in board_process_pd_alert */ -} - -static void check_c1_line(void) -{ - /* - * If line is still being held low, see if there's more to process from - * one of the chips. - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - notify_c1_chips(); - hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); - } -} - -void usb_c1_interrupt(enum gpio_signal s) -{ - /* Cancel any previous calls to check the interrupt line */ - hook_call_deferred(&check_c1_line_data, -1); - - /* Notify all chips using this line that an interrupt came in */ - notify_c1_chips(); - - /* Check the line again in 5ms */ - hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); -} - -/* - * Check state of IRQ lines at startup, ensuring an IRQ that happened before - * the EC started up won't get lost (leaving the IRQ line asserted and blocking - * any further interrupts on the port). - * - * Although the PD task will check for pending TCPC interrupts on startup, - * the charger sharing the IRQ will not be polled automatically. - */ -void board_handle_initial_typec_irq(void) -{ - check_c0_line(); - check_c1_line(); -} -/* - * This must run after sub-board detection (which happens in EC main()), - * but isn't depended on by anything else either. - */ -DECLARE_HOOK(HOOK_INIT, board_handle_initial_typec_irq, HOOK_PRIO_LAST); - -/* - * Handle charger interrupts in the PD task. Not doing so can lead to a priority - * inversion where we fail to respond to TCPC alerts quickly enough because we - * don't get another edge on a shared IRQ until the charger interrupt is cleared - * (or the IRQ is polled again), which happens in the low-priority charger task: - * the high-priority type-C handler is thus blocked on the lower-priority - * charger. - * - * To avoid that, we run charger interrupts at the same priority. - */ -void board_process_pd_alert(int port) -{ - /* - * Port 0 doesn't use an external TCPC, so its interrupts don't need - * this special handling. - */ - if (port == 1 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - sm5803_handle_interrupt(port); - } -} - -int pd_snk_is_vbus_provided(int port) -{ - int chg_det = 0; - - sm5803_get_chg_det(port, &chg_det); - - return chg_det; -} diff --git a/zephyr/projects/nissa/nereid/generated.dtsi b/zephyr/projects/nissa/nereid/generated.dtsi deleted file mode 100644 index bca58c478e..0000000000 --- a/zephyr/projects/nissa/nereid/generated.dtsi +++ /dev/null @@ -1,260 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * This file is auto-generated - do not edit! - */ - -/ { - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ec_vsense_pp1050_proc: ec_vsense_pp1050_proc { - enum-name = "ADC_PP1050_PROC"; - io-channels = <&adc0 14>; - }; - adc_ec_vsense_pp3300_s5: ec_vsense_pp3300_s5 { - enum-name = "ADC_PP3300_S5"; - io-channels = <&adc0 0>; - }; - adc_temp_sensor_1: temp_sensor_1 { - enum-name = "ADC_TEMP_SENSOR_1"; - io-channels = <&adc0 2>; - }; - adc_temp_sensor_2: temp_sensor_2 { - enum-name = "ADC_TEMP_SENSOR_2"; - io-channels = <&adc0 3>; - }; - adc_temp_sensor_3: temp_sensor_3 { - enum-name = "ADC_TEMP_SENSOR_3"; - io-channels = <&adc0 13>; - }; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_acc_int_l: acc_int_l { - gpios = <&gpioc 0 GPIO_INPUT>; - }; - gpio_all_sys_pwrgd: all_sys_pwrgd { - gpios = <&gpiob 7 GPIO_INPUT>; - }; - gpio_ccd_mode_odl: ccd_mode_odl { - gpios = <&gpioh 5 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - gpio_cpu_c10_gate_l: cpu_c10_gate_l { - gpios = <&gpiog 1 GPIO_INPUT>; - }; - gpio_ec_battery_pres_odl: ec_battery_pres_odl { - gpios = <&gpioi 4 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - gpio_ec_cbi_wp: ec_cbi_wp { - gpios = <&gpioj 5 GPIO_OUTPUT>; - }; - gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - gpios = <&gpiok 4 GPIO_ODR_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_entering_rw: ec_entering_rw { - gpios = <&gpioc 7 GPIO_OUTPUT>; - enum-name = "GPIO_ENTERING_RW"; - }; - gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - gpios = <&gpioh 1 GPIO_OUTPUT>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_odl { - gpios = <&gpiob 2 GPIO_ODR_LOW>; - }; - gpio_ec_prochot_odl: ec_prochot_odl { - gpios = <&gpioi 1 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - gpios = <&gpiol 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_hdmi_hpd: ec_soc_hdmi_hpd { - gpios = <&gpiok 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_int_odl: ec_soc_int_odl { - gpios = <&gpiod 5 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - gpios = <&gpiod 6 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - gpios = <&gpiob 6 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - gpios = <&gpioh 0 GPIO_OUTPUT>; - }; - gpio_ec_soc_rtcrst: ec_soc_rtcrst { - gpios = <&gpiok 2 GPIO_OUTPUT>; - }; - gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - gpios = <&gpiof 2 GPIO_OUTPUT>; - }; - gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - gpios = <&gpioe 5 GPIO_ODR_HIGH>; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpioa 6 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_en_kb_bl: en_kb_bl { - gpios = <&gpioj 3 GPIO_OUTPUT>; - enum-name = "GPIO_EN_KEYBOARD_BACKLIGHT"; - }; - gpio_en_pp3300_s5: en_pp3300_s5 { - gpios = <&gpioc 5 GPIO_OUTPUT>; - enum-name = "GPIO_TEMP_SENSOR_POWER"; - }; - gpio_en_pp5000_pen_x: en_pp5000_pen_x { - gpios = <&gpiob 5 GPIO_OUTPUT>; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpiok 5 GPIO_OUTPUT>; - }; - gpio_en_slp_z: en_slp_z { - gpios = <&gpiok 3 GPIO_OUTPUT>; - }; - gpio_en_usb_a0_vbus: en_usb_a0_vbus { - gpios = <&gpiol 6 GPIO_OUTPUT>; - }; - gpio_en_usb_c0_cc1_vconn: en_usb_c0_cc1_vconn { - gpios = <&gpioh 4 GPIO_OUTPUT>; - }; - gpio_en_usb_c0_cc2_vconn: en_usb_c0_cc2_vconn { - gpios = <&gpioh 6 GPIO_OUTPUT>; - }; - gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpioe 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_hdmi_sel: hdmi_sel { - gpios = <&gpioc 6 GPIO_OUTPUT>; - }; - gpio_imu_int_l: imu_int_l { - gpios = <&gpioj 0 GPIO_INPUT>; - }; - gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - gpios = <&gpioj 4 GPIO_INPUT>; - }; - gpio_lid_open: lid_open { - gpios = <&gpiof 3 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_pen_detect_odl: pen_detect_odl { - gpios = <&gpioj 1 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - gpios = <&gpiod 3 GPIO_INPUT>; - }; - gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - gpios = <&gpioe 3 GPIO_INPUT>; - }; - gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - gpios = <&gpioe 1 GPIO_INPUT_PULL_UP>; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpioe 4 GPIO_INPUT>; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioh 3 GPIO_INPUT>; - }; - gpio_slp_s4_l: slp_s4_l { - gpios = <&gpioi 5 GPIO_INPUT>; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpiog 2 GPIO_INPUT>; - }; - gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - gpios = <&gpiof 1 GPIO_OUTPUT>; - enum-name = "GPIO_USB2_ILIM_SEL"; - }; - gpio_sys_rst_odl: sys_rst_odl { - gpios = <&gpiod 1 GPIO_ODR_HIGH>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpioa 7 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - gpios = <&gpiol 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB1_ILIM_SEL"; - }; - gpio_usb_c0_frs: usb_c0_frs { - gpios = <&gpioc 4 GPIO_OUTPUT>; - }; - gpio_usb_c0_int_odl: usb_c0_int_odl { - gpios = <&gpiok 0 GPIO_INPUT_PULL_UP>; - }; - gpio_vccin_aux_vid0: vccin_aux_vid0 { - gpios = <&gpiod 0 GPIO_INPUT>; - }; - gpio_vccin_aux_vid1: vccin_aux_vid1 { - gpios = <&gpiok 1 GPIO_INPUT>; - }; - gpio_voldn_btn_odl: voldn_btn_odl { - gpios = <&gpioi 6 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_volup_btn_odl: volup_btn_odl { - gpios = <&gpioi 7 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - }; - - named-i2c-ports { - compatible = "named-i2c-ports"; - - i2c_ec_i2c_eeprom: ec_i2c_eeprom { - i2c-port = <&i2c0>; - enum-names = "I2C_PORT_EEPROM"; - }; - i2c_ec_i2c_batt: ec_i2c_batt { - i2c-port = <&i2c1>; - enum-names = "I2C_PORT_BATTERY"; - }; - i2c_ec_i2c_sensor: ec_i2c_sensor { - i2c-port = <&i2c2>; - enum-names = "I2C_PORT_SENSOR"; - }; - i2c_ec_i2c_sub_usb_c1: ec_i2c_sub_usb_c1 { - i2c-port = <&i2c4>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - }; - i2c_ec_i2c_usb_c0: ec_i2c_usb_c0 { - i2c-port = <&i2c5>; - enum-names = "I2C_PORT_USB_C0_TCPC"; - }; - }; -}; - -&adc0 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/nereid/keyboard.dtsi b/zephyr/projects/nissa/nereid/keyboard.dtsi deleted file mode 100644 index 04a620767a..0000000000 --- a/zephyr/projects/nissa/nereid/keyboard.dtsi +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - kblight { - compatible = "cros-ec,kblight-pwm"; - /* - * Use 324 Hz so that 32Khz clock source is used, - * which is not gated in power saving mode. - */ - pwms = <&pwm0 0 PWM_HZ(324) PWM_POLARITY_NORMAL>; - }; -}; - -&pwm0 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm0_gpa0_default>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/nereid/motionsense.dtsi b/zephyr/projects/nissa/nereid/motionsense.dtsi deleted file mode 100644 index a65bb48fbd..0000000000 --- a/zephyr/projects/nissa/nereid/motionsense.dtsi +++ /dev/null @@ -1,147 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * Interrupt bindings for sensor devices. - */ - bmi3xx-int = &base_accel; - bma4xx-int = &lid_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - lid_mutex: lid-mutex { - }; - - base_mutex: base-mutex { - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <0 (-1) 0 - (-1) 0 0 - 0 0 (-1)>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <0 1 0 - (-1) 0 0 - 0 0 1>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - bmi323_data: bmi323-drv-data { - compatible = "cros-ec,drvdata-bmi3xx"; - status = "okay"; - }; - - bma422_data: bma422-drv-data { - compatible = "cros-ec,drvdata-bma4xx"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The nodelabel "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - * TODO(b/238139272): The first entries of the array must be - * accelerometers,then gyroscope. Fix this dependency in the DTS - * processing which makes the devicetree entries independent. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,bma4xx"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&bma422_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,bmi3xx-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi323_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_gyro: base-gyro { - compatible = "cros-ec,bmi3xx-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi323_data>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&int_imu &int_lid_imu>; - }; -}; diff --git a/zephyr/projects/nissa/nereid/nereid_vif.xml b/zephyr/projects/nissa/nereid/nereid_vif.xml deleted file mode 100644 index 91c8dbe68b..0000000000 --- a/zephyr/projects/nissa/nereid/nereid_vif.xml +++ /dev/null @@ -1,350 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?>
-<vif:VIF xmlns:opt="http://usb.org/VendorInfoFileOptionalContent.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:vif="http://usb.org/VendorInfoFile.xsd">
- <vif:VIF_Specification>3.19</vif:VIF_Specification>
- <vif:VIF_App>
- <vif:Vendor>USB-IF</vif:Vendor>
- <vif:Name>VIF Editor</vif:Name>
- <vif:Version>3.2.4.0</vif:Version>
- </vif:VIF_App>
- <vif:Vendor_Name>Google</vif:Vendor_Name>
- <vif:Model_Part_Number>Nereid</vif:Model_Part_Number>
- <vif:Product_Revision>1</vif:Product_Revision>
- <vif:TID>0</vif:TID>
- <vif:VIF_Product_Type value="0">Port Product</vif:VIF_Product_Type>
- <vif:Certification_Type value="1">Reference Platform</vif:Certification_Type>
- <vif:Product>
- <!--Product Level Content:-->
- </vif:Product>
- <vif:Component>
- <!--Component 0: Port 0-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Component-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Port_Label>0</vif:Port_Label>
- <vif:Connector_Type value="2">Type-C®</vif:Connector_Type>
- <vif:USB4_Supported value="false" />
- <vif:USB_PD_Support value="true" />
- <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type>
- <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine>
- <vif:Port_Battery_Powered value="true" />
- <vif:BC_1_2_Support value="2">Charging Port</vif:BC_1_2_Support>
- <vif:Captive_Cable value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;General PD-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Spec_Revision_Major value="3" />
- <vif:PD_Spec_Revision_Minor value="1" />
- <vif:PD_Spec_Version_Major value="1" />
- <vif:PD_Spec_Version_Minor value="3" />
- <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision>
- <vif:SOP_Capable value="true" />
- <vif:SOP_P_Capable value="true" />
- <vif:SOP_PP_Capable value="true" />
- <vif:SOP_P_Debug_Capable value="false" />
- <vif:SOP_PP_Debug_Capable value="false" />
- <vif:Manufacturer_Info_Supported_Port value="true" />
- <vif:Manufacturer_Info_VID_Port value="6353">18D1</vif:Manufacturer_Info_VID_Port>
- <vif:Manufacturer_Info_PID_Port value="20570">505A</vif:Manufacturer_Info_PID_Port>
- <vif:Chunking_Implemented_SOP value="true" />
- <vif:Unchunked_Extended_Messages_Supported value="false" />
- <vif:Security_Msgs_Supported_SOP value="false" />
- <vif:Unconstrained_Power value="false" />
- <vif:Num_Fixed_Batteries value="1" />
- <vif:Num_Swappable_Battery_Slots value="0" />
- <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Capabilities-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:USB_Comms_Capable value="true" />
- <vif:DR_Swap_To_DFP_Supported value="true" />
- <vif:DR_Swap_To_UFP_Supported value="false" />
- <vif:VCONN_Swap_To_On_Supported value="true" />
- <vif:VCONN_Swap_To_Off_Supported value="true" />
- <vif:Responds_To_Discov_SOP_UFP value="false" />
- <vif:Responds_To_Discov_SOP_DFP value="true" />
- <vif:Attempts_Discov_SOP value="true" />
- <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available>
- <vif:Data_Reset_Supported value="false" />
- <vif:Enter_USB_Supported value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Type-C®-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Type_C_Can_Act_As_Host value="true" />
- <vif:Type_C_Can_Act_As_Device value="false" />
- <vif:Type_C_Implements_Try_SRC value="true" />
- <vif:Type_C_Implements_Try_SNK value="false" />
- <vif:Type_C_Supports_Audio_Accessory value="false" />
- <vif:Type_C_Is_VCONN_Powered_Accessory value="false" />
- <vif:Type_C_Is_Debug_Target_SRC value="true" />
- <vif:Type_C_Is_Debug_Target_SNK value="true" />
- <vif:RP_Value value="1">1.5A</vif:RP_Value>
- <vif:Type_C_Port_On_Hub value="false" />
- <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source>
- <vif:Type_C_Sources_VCONN value="true" />
- <vif:Type_C_Is_Alt_Mode_Controller value="true" />
- <vif:Type_C_Is_Alt_Mode_Adapter value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Product Power-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW>
- <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Host-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Host_Supports_USB_Data value="true" />
- <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed>
- <vif:Host_Contains_Captive_Retimer value="false" />
- <vif:Host_Truncates_DP_For_tDHPResponse value="false" />
- <vif:Host_Is_Embedded value="false" />
- <vif:Host_Suspend_Supported value="true" />
- <vif:Is_DFP_On_Hub value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Battery Charging 1.2-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Source-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source>
- <vif:EPR_Supported_As_Src value="false" />
- <vif:USB_Suspend_May_Be_Cleared value="false" />
- <vif:Sends_Pings value="false" />
- <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink>
- <vif:Master_Port value="false" />
- <vif:Num_Src_PDOs value="1" />
- <vif:PD_OC_Protection value="true" />
- <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method>
- <!--Bundle: SrcPdoList-->
- <vif:SrcPdoList>
- <vif:SrcPDO>
- <!--Source PDO 1-->
- <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type>
- <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current>
- <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage>
- <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current>
- <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce>
- <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold>
- </vif:SrcPDO>
- </vif:SrcPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Sink-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Sink value="45000">45000 mW</vif:PD_Power_As_Sink>
- <vif:EPR_Supported_As_Snk value="false" />
- <vif:No_USB_Suspend_May_Be_Set value="true" />
- <vif:GiveBack_May_Be_Set value="false" />
- <vif:Higher_Capability_Set value="false" />
- <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source>
- <vif:Num_Snk_PDOs value="3" />
- <!--Bundle: SnkPdoList-->
- <vif:SnkPdoList>
- <vif:SnkPDO>
- <!--Sink PDO 1-->
- <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 2-->
- <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 3-->
- <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- </vif:SnkPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Dual Role-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Accepts_PR_Swap_As_Src value="true" />
- <vif:Accepts_PR_Swap_As_Snk value="true" />
- <vif:Requests_PR_Swap_As_Src value="true" />
- <vif:Requests_PR_Swap_As_Snk value="true" />
- <vif:FR_Swap_Supported_As_Initial_Sink value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;SOP Discover ID-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:XID_SOP value="0" />
- <vif:Data_Capable_As_USB_Host_SOP value="true" />
- <vif:Data_Capable_As_USB_Device_SOP value="false" />
- <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP>
- <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP>
- <vif:DFP_VDO_Port_Number value="0" />
- <vif:Modal_Operation_Supported_SOP value="false" />
- <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP>
- <vif:PID_SOP value="20570">505A</vif:PID_SOP>
- <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP>
- </vif:Component>
- <vif:Component>
- <!--Component 1: Port 1-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Component-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Port_Label>1</vif:Port_Label>
- <vif:Connector_Type value="2">Type-C®</vif:Connector_Type>
- <vif:USB4_Supported value="false" />
- <vif:USB_PD_Support value="true" />
- <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type>
- <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine>
- <vif:Port_Battery_Powered value="true" />
- <vif:BC_1_2_Support value="2">Charging Port</vif:BC_1_2_Support>
- <vif:Captive_Cable value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;General PD-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Spec_Revision_Major value="3" />
- <vif:PD_Spec_Revision_Minor value="1" />
- <vif:PD_Spec_Version_Major value="1" />
- <vif:PD_Spec_Version_Minor value="3" />
- <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision>
- <vif:SOP_Capable value="true" />
- <vif:SOP_P_Capable value="true" />
- <vif:SOP_PP_Capable value="true" />
- <vif:SOP_P_Debug_Capable value="false" />
- <vif:SOP_PP_Debug_Capable value="false" />
- <vif:Manufacturer_Info_Supported_Port value="true" />
- <vif:Manufacturer_Info_VID_Port value="6353">18D1</vif:Manufacturer_Info_VID_Port>
- <vif:Manufacturer_Info_PID_Port value="20570">505A</vif:Manufacturer_Info_PID_Port>
- <vif:Chunking_Implemented_SOP value="true" />
- <vif:Unchunked_Extended_Messages_Supported value="false" />
- <vif:Security_Msgs_Supported_SOP value="false" />
- <vif:Unconstrained_Power value="false" />
- <vif:Num_Fixed_Batteries value="1" />
- <vif:Num_Swappable_Battery_Slots value="0" />
- <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Capabilities-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:USB_Comms_Capable value="true" />
- <vif:DR_Swap_To_DFP_Supported value="true" />
- <vif:DR_Swap_To_UFP_Supported value="false" />
- <vif:VCONN_Swap_To_On_Supported value="true" />
- <vif:VCONN_Swap_To_Off_Supported value="true" />
- <vif:Responds_To_Discov_SOP_UFP value="false" />
- <vif:Responds_To_Discov_SOP_DFP value="true" />
- <vif:Attempts_Discov_SOP value="true" />
- <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available>
- <vif:Data_Reset_Supported value="false" />
- <vif:Enter_USB_Supported value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Type-C®-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Type_C_Can_Act_As_Host value="true" />
- <vif:Type_C_Can_Act_As_Device value="false" />
- <vif:Type_C_Implements_Try_SRC value="true" />
- <vif:Type_C_Implements_Try_SNK value="false" />
- <vif:Type_C_Supports_Audio_Accessory value="false" />
- <vif:Type_C_Is_VCONN_Powered_Accessory value="false" />
- <vif:Type_C_Is_Debug_Target_SRC value="true" />
- <vif:Type_C_Is_Debug_Target_SNK value="true" />
- <vif:RP_Value value="1">1.5A</vif:RP_Value>
- <vif:Type_C_Port_On_Hub value="false" />
- <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source>
- <vif:Type_C_Sources_VCONN value="true" />
- <vif:Type_C_Is_Alt_Mode_Controller value="true" />
- <vif:Type_C_Is_Alt_Mode_Adapter value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Product Power-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW>
- <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Host-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Host_Supports_USB_Data value="true" />
- <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed>
- <vif:Host_Contains_Captive_Retimer value="true" />
- <vif:Host_Truncates_DP_For_tDHPResponse value="false" />
- <vif:Host_Is_Embedded value="false" />
- <vif:Host_Suspend_Supported value="true" />
- <vif:Is_DFP_On_Hub value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Battery Charging 1.2-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Source-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source>
- <vif:EPR_Supported_As_Src value="false" />
- <vif:USB_Suspend_May_Be_Cleared value="false" />
- <vif:Sends_Pings value="false" />
- <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink>
- <vif:Master_Port value="false" />
- <vif:Num_Src_PDOs value="1" />
- <vif:PD_OC_Protection value="true" />
- <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method>
- <!--Bundle: SrcPdoList-->
- <vif:SrcPdoList>
- <vif:SrcPDO>
- <!--Source PDO 1-->
- <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type>
- <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current>
- <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage>
- <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current>
- <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce>
- <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold>
- </vif:SrcPDO>
- </vif:SrcPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Sink-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Sink value="45000">45000 mW</vif:PD_Power_As_Sink>
- <vif:EPR_Supported_As_Snk value="false" />
- <vif:No_USB_Suspend_May_Be_Set value="true" />
- <vif:GiveBack_May_Be_Set value="false" />
- <vif:Higher_Capability_Set value="false" />
- <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source>
- <vif:Num_Snk_PDOs value="3" />
- <!--Bundle: SnkPdoList-->
- <vif:SnkPdoList>
- <vif:SnkPDO>
- <!--Sink PDO 1-->
- <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 2-->
- <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 3-->
- <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- </vif:SnkPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Dual Role-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Accepts_PR_Swap_As_Src value="true" />
- <vif:Accepts_PR_Swap_As_Snk value="true" />
- <vif:Requests_PR_Swap_As_Src value="true" />
- <vif:Requests_PR_Swap_As_Snk value="true" />
- <vif:FR_Swap_Supported_As_Initial_Sink value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;SOP Discover ID-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:XID_SOP value="0" />
- <vif:Data_Capable_As_USB_Host_SOP value="true" />
- <vif:Data_Capable_As_USB_Device_SOP value="false" />
- <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP>
- <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP>
- <vif:DFP_VDO_Port_Number value="1" />
- <vif:Modal_Operation_Supported_SOP value="false" />
- <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP>
- <vif:PID_SOP value="20570">505A</vif:PID_SOP>
- <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP>
- </vif:Component>
-</vif:VIF>
\ No newline at end of file diff --git a/zephyr/projects/nissa/nereid/overlay.dtsi b/zephyr/projects/nissa/nereid/overlay.dtsi deleted file mode 100644 index a44a3e01bd..0000000000 --- a/zephyr/projects/nissa/nereid/overlay.dtsi +++ /dev/null @@ -1,400 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - aliases { - gpio-cbi-wp = &gpio_ec_cbi_wp; - gpio-wp = &gpio_ec_wp_odl; - int-wp = &int_wp_l; - /* - * USB-C: interrupt input. - * I2C pins are on i2c_ec_i2c_sub_usb_c1 - */ - gpio-usb-c1-int-odl = &gpio_sb_1; - /* - * USB-A: VBUS enable output - * LTE: power enable output - */ - gpio-en-usb-a1-vbus = &gpio_sb_2; - /* - * HDMI: power enable output, HDMI enable output, - * and HPD input - */ - gpio-en-rails-odl = &gpio_sb_1; - gpio-hdmi-en-odl = &gpio_sb_4; - gpio-hpd-odl = &gpio_sb_3; - /* - * Enable S5 rails for LTE sub-board - */ - gpio-en-sub-s5-rails = &gpio_sb_2; - }; - - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; - - batteries { - default_battery: smp { - compatible = "smp,l20m3pg0", "battery-smart"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-irqs = < - &int_power_button - &int_lid_open - >; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_power_button: power_button { - irq-pin = <&gpio_gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_vol_down: vol_down { - irq-pin = <&gpio_voldn_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_vol_up: vol_up { - irq-pin = <&gpio_volup_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_wp_l: wp_l { - irq-pin = <&gpio_ec_wp_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_lid_open: lid_open { - irq-pin = <&gpio_lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_tablet_mode: tablet_mode { - irq-pin = <&gpio_tablet_mode_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "gmr_tablet_switch_isr"; - }; - int_imu: ec_imu { - irq-pin = <&gpio_imu_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "bmi3xx_interrupt"; - }; - int_lid_imu: lid_imu { - irq-pin = <&gpio_acc_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "bma4xx_interrupt"; - }; - int_usb_c0: usb_c0 { - irq-pin = <&gpio_usb_c0_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_c0_interrupt"; - }; - int_usb_c1: usb_c1 { - irq-pin = <&gpio_sb_1>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_c1_interrupt"; - }; - }; - - unused-pins { - compatible = "unused-gpios"; - unused-gpios = <&gpioc 3 0>, - <&gpiod 4 0>, - <&gpiod 7 0>, - <&gpioh 2 0>, - <&gpioj 7 0>, - <&gpiol 4 0>; - }; - - named-gpios { - /* - * EC doesn't take any specific action on CC/SBU disconnect due to - * fault, but this definition is useful for hardware testing. - */ - gpio_usb_c0_prot_fault_odl: usb_c0_prot_fault_odl { - gpios = <&gpiok 6 GPIO_INPUT_PULL_UP>; - }; - - gpio_sb_1: sb_1 { - gpios = <&gpioe 6 0>; - no-auto-init; - }; - gpio_sb_2: sb_2 { - gpios = <&gpiof 0 0>; - no-auto-init; - }; - - gpio_sb_3: sb_3 { - gpios = <&gpioe 7 0>; - no-auto-init; - }; - gpio_sb_4: sb_4 { - gpios = <&gpioe 0 0>; - no-auto-init; - }; - }; - - temp_memory: memory { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_1>; - }; - temp_charger: charger { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_2>; - }; - temp_ambient: ambient { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_3>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - memory { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_memory>; - }; - charger { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_charger>; - }; - ambient { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_ambient>; - }; - }; - - usba { - compatible = "cros-ec,usba-port-enable-pins"; - /* - * sb_2 is only configured as GPIO when USB-A1 is present, - * but it's still safe to control when disabled. - * - * ILIM_SEL pins are referred to by legacy enum name, - * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on - * sub-boards that don't have USB-A so is safe to control - * regardless of system configuration. - */ - enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>; - status = "okay"; - }; - - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - chg = <&chg_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_0>; - }; - }; - port0-muxes { - virtual_mux_0: virtual-mux-0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - port1@1 { - compatible = "named-usbc-port"; - reg = <1>; - bc12 = <&bc12_port1>; - chg = <&chg_port1>; - usb-mux-chain-1 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_1 &tcpci_mux_1>; - }; - usb_mux_chain_1_no_mux: usb-mux-chain-1-no-mux { - compatible = "cros-ec,usb-mux-chain"; - alternative-chain; - usb-muxes = <&virtual_mux_1>; - }; - }; - port1-muxes { - virtual_mux_1: virtual-mux-1 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - tcpci_mux_1: tcpci-mux-1 { - compatible = "parade,usbc-mux-ps8xxx"; - }; - }; - }; -}; - -&gpio_acc_int_l { - gpios = <&gpioc 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; -&gpio_imu_int_l { - gpios = <&gpioj 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; -&gpio_vccin_aux_vid0 { - gpios = <&gpiod 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; -&gpio_vccin_aux_vid1 { - gpios = <&gpiok 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; -}; - -&gpio_ec_prochot_odl { - gpios = <&gpioi 1 (GPIO_ODR_HIGH | GPIO_VOLTAGE_1P8)>; -}; - -&thermistor_3V3_51K1_47K_4050B { - status = "okay"; -}; - -&adc_ec_vsense_pp3300_s5 { - /* - * Voltage divider on input has 47k upper and 220k lower legs with 3 V - * full-scale reading on the ADC. Apply the largest possible multiplier - * (without overflowing int32) to get the best possible approximation - * of the actual ratio, but derate by a factor of two to ensure - * unexpectedly high values won't overflow. - */ - mul = <(715828 / 2)>; - div = <(589820 / 2)>; -}; - -&adc0 { - pinctrl-0 = <&adc0_ch0_gpi0_default - &adc0_ch2_gpi2_default - &adc0_ch3_gpi3_default - &adc0_ch13_gpl0_default - &adc0_ch14_gpl1_default>; - pinctrl-names = "default"; -}; - -&pinctrl { - i2c4_clk_gpe0_sleep: i2c4_clk_gpe0_sleep { - pinmuxs = <&pinctrle 0 IT8XXX2_ALT_DEFAULT>; - }; - i2c4_data_gpe7_sleep: i2c4_data_gpe7_sleep { - pinmuxs = <&pinctrle 7 IT8XXX2_ALT_DEFAULT>; - }; - i2c2_clk_gpf6_default: i2c2_clk_gpf6_default { - gpio-voltage = "1v8"; - }; - i2c2_data_gpf7_default: i2c2_data_gpf7_default { - gpio-voltage = "1v8"; - }; -}; - -&i2c0 { - label = "I2C_EEPROM"; - clock-frequency = <I2C_BITRATE_FAST>; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; - pinctrl-0 = <&i2c0_clk_gpb3_default - &i2c0_data_gpb4_default>; - pinctrl-names = "default"; -}; - -&i2c1 { - label = "I2C_BATTERY"; - clock-frequency = <50000>; - pinctrl-0 = <&i2c1_clk_gpc1_default - &i2c1_data_gpc2_default>; - pinctrl-names = "default"; -}; - -&i2c2 { - label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c2_clk_gpf6_default - &i2c2_data_gpf7_default>; - pinctrl-names = "default"; -}; - -&i2c4 { - label = "I2C_SUB_C1_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c4_clk_gpe0_default - &i2c4_data_gpe7_default>; - pinctrl-1 = <&i2c4_clk_gpe0_sleep - &i2c4_data_gpe7_sleep>; - pinctrl-names = "default", "sleep"; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port1: sm5803@32 { - compatible = "siliconmitus,sm5803"; - status = "okay"; - reg = <0x32>; - }; -}; - -&i2c_ec_i2c_sub_usb_c1 { - /* - * Dynamic speed setting is used for AP-controlled firmware update - * of PS8745 TCPC/redriver: the AP lowers speed to 400 kHz in order - * to use more efficient window programming, then sets it back when - * done. - */ - dynamic-speed; -}; - -&i2c5 { - label = "I2C_USB_C0_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c5_clk_gpa4_default - &i2c5_data_gpa5_default>; - pinctrl-names = "default"; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port0: sm5803@32 { - compatible = "siliconmitus,sm5803"; - status = "okay"; - reg = <0x32>; - }; -}; - -&usbpd0 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/nereid/power_signals.dtsi b/zephyr/projects/nissa/nereid/power_signals.dtsi deleted file mode 100644 index 8affae03b1..0000000000 --- a/zephyr/projects/nissa/nereid/power_signals.dtsi +++ /dev/null @@ -1,223 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - chosen { - intel-ap-pwrseq,espi = &espi0; - }; - - common-pwrseq { - compatible = "intel,ap-pwrseq"; - - sys-pwrok-delay = <10>; - all-sys-pwrgd-timeout = <20>; - }; - - pwr-en-pp5000-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP5000_S5 enable output to regulator"; - enum-name = "PWR_EN_PP5000_A"; - gpios = <&gpiok 5 0>; - output; - }; - pwr-en-pp3300-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP3300_S5 enable output to LS"; - enum-name = "PWR_EN_PP3300_A"; - gpios = <&gpioc 5 0>; - output; - }; - pwr-pg-ec-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST power good from regulator"; - enum-name = "PWR_RSMRST"; - gpios = <&gpioe 1 0>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-pch-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST output to PCH"; - enum-name = "PWR_EC_PCH_RSMRST"; - gpios = <&gpioh 0 0>; - output; - }; - pwr-slp-s0-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S0_L input from PCH"; - enum-name = "PWR_SLP_S0"; - gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-s3-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S3_L input from PCH"; - enum-name = "PWR_SLP_S3"; - gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-sus-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_SUS_L input from PCH"; - enum-name = "PWR_SLP_SUS"; - gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-soc-dsw-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "DSW_PWROK output to PCH"; - enum-name = "PWR_EC_SOC_DSW_PWROK"; - gpios = <&gpiol 7 0>; - output; - }; - pwr-vccst-pwrgd-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VCCST_PWRGD output to PCH"; - enum-name = "PWR_VCCST_PWRGD"; - gpios = <&gpioe 5 (GPIO_OPEN_DRAIN | GPIO_VOLTAGE_1P8)>; - output; - }; - pwr-imvp9-vrrdy-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VRRDY input from IMVP9"; - enum-name = "PWR_IMVP9_VRRDY"; - gpios = <&gpioj 4 0>; - }; - pwr-pch-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PCH_PWROK output to PCH"; - enum-name = "PWR_PCH_PWROK"; - gpios = <&gpiod 6 GPIO_OPEN_DRAIN>; - output; - }; - pwr-ec-pch-sys-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_PWROK output to PCH"; - enum-name = "PWR_EC_PCH_SYS_PWROK"; - gpios = <&gpiof 2 0>; - output; - }; - pwr-sys-rst-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_RESET# output to PCH"; - enum-name = "PWR_SYS_RST"; - gpios = <&gpiod 1 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; - output; - }; - pwr-slp-s4 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S4 virtual wire input from PCH"; - enum-name = "PWR_SLP_S4"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; - vw-invert; - }; - pwr-slp-s5 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S5 virtual wire input from PCH"; - enum-name = "PWR_SLP_S5"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; - vw-invert; - }; - pwr-all-sys-pwrgd { - /* - * This is a board level signal, since this - * signal needs some special processing. - */ - compatible = "intel,ap-pwrseq-external"; - dbg-label = "Combined all power good"; - enum-name = "PWR_ALL_SYS_PWRGD"; - }; - pwr-adc-pp3300 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP3300_PROC"; - enum-name = "PWR_DSW_PWROK"; - trigger-high = <&vcmp0>; - trigger-low = <&vcmp1>; - }; - pwr-adc-pp1p05 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP1P05_PROC"; - enum-name = "PWR_PG_PP1P05"; - trigger-high = <&vcmp2>; - trigger-low = <&vcmp3>; - }; - -}; - -/* - * Because the power signals directly reference the GPIOs, - * the correspinding named-gpios need to have no-auto-init set. - */ -&gpio_ec_soc_dsw_pwrok { - no-auto-init; -}; -&gpio_ec_soc_pch_pwrok_od { - no-auto-init; -}; -&gpio_ec_soc_rsmrst_l { - no-auto-init; -}; -&gpio_ec_soc_sys_pwrok { - no-auto-init; -}; -&gpio_ec_soc_vccst_pwrgd_od { - no-auto-init; -}; -&gpio_en_pp3300_s5 { - no-auto-init; -}; -&gpio_en_pp5000_s5 { - no-auto-init; -}; -&gpio_imvp91_vrrdy_od { - no-auto-init; -}; -&gpio_rsmrst_pwrgd_l { - no-auto-init; -}; -&gpio_slp_s0_l { - no-auto-init; -}; -&gpio_slp_s3_l { - no-auto-init; -}; -&gpio_slp_sus_l { - no-auto-init; -}; -&gpio_sys_rst_odl { - no-auto-init; -}; -&vcmp0 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_GREATER>; - /* - * This is 90% of nominal voltage considering voltage - * divider on ADC input. - */ - threshold-mv = <2448>; - io-channels = <&adc0 0>; -}; -&vcmp1 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_LESS_OR_EQUAL>; - threshold-mv = <2448>; - io-channels = <&adc0 0>; -}; -&vcmp2 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_GREATER>; - /* Setting at 90% of nominal voltage */ - threshold-mv = <945>; - io-channels = <&adc0 14>; -}; -&vcmp3 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_LESS_OR_EQUAL>; - threshold-mv = <945>; - io-channels = <&adc0 14>; -}; diff --git a/zephyr/projects/nissa/nereid/project.conf b/zephyr/projects/nissa/nereid/project.conf deleted file mode 100644 index 75a5faba5d..0000000000 --- a/zephyr/projects/nissa/nereid/project.conf +++ /dev/null @@ -1,17 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_BOARD_NEREID=y - -# Ensure recovery key combination (esc+refresh+power) is reliable: b/236580049 -CONFIG_PLATFORM_EC_KEYBOARD_PWRBTN_ASSERTS_KSI2=y - -# Sensor drivers -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI3XX=y -CONFIG_PLATFORM_EC_ACCEL_BMA4XX=y -CONFIG_PLATFORM_EC_MAX_SENSOR_FREQ_MILLIHZ=100000 - -# No fan supported, and tach is default-enabled -CONFIG_TACH_IT8XXX2=n diff --git a/zephyr/projects/nissa/nereid/project.overlay b/zephyr/projects/nissa/nereid/project.overlay deleted file mode 100644 index 0aceac1c47..0000000000 --- a/zephyr/projects/nissa/nereid/project.overlay +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "../cbi.dtsi" - -#include "generated.dtsi" -#include "keyboard.dtsi" -#include "motionsense.dtsi" -#include "overlay.dtsi" -#include "power_signals.dtsi" -#include "pwm_leds.dtsi" diff --git a/zephyr/projects/nissa/nereid/pwm_leds.dtsi b/zephyr/projects/nissa/nereid/pwm_leds.dtsi deleted file mode 100644 index aa4a76b271..0000000000 --- a/zephyr/projects/nissa/nereid/pwm_leds.dtsi +++ /dev/null @@ -1,60 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - pwmleds { - compatible = "pwm-leds"; - pwm_led0: pwm_led_0 { - pwms = <&pwm1 1 PWM_HZ(1296) PWM_POLARITY_INVERTED>, - <&pwm2 2 PWM_HZ(1296) PWM_POLARITY_INVERTED>, - <&pwm3 3 PWM_HZ(1296) PWM_POLARITY_INVERTED>; - }; - }; - - cros-pwmleds { - compatible = "cros-ec,pwm-leds"; - - leds = <&pwm_led0>; - - /*<red green blue>*/ - color-map-red = <100 0 0>; - color-map-green = < 0 100 0>; - color-map-blue = < 0 0 100>; - color-map-yellow = < 0 50 50>; - color-map-white = <100 100 100>; - color-map-amber = <100 15 0>; - - brightness-range = <100 100 100 0 0 0>; - - #address-cells = <1>; - #size-cells = <0>; - - pwm_led_0@0 { - reg = <0>; - ec-led-name = "EC_LED_ID_BATTERY_LED"; - }; - }; -}; - -&pwm1 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm1_gpa1_default>; - pinctrl-names = "default"; -}; - -&pwm2 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm2_gpa2_default>; - pinctrl-names = "default"; -}; - -&pwm3 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm3_gpa3_default>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/nereid/src/charger.c b/zephyr/projects/nissa/nereid/src/charger.c deleted file mode 100644 index 181e9a61fd..0000000000 --- a/zephyr/projects/nissa/nereid/src/charger.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "battery.h" -#include "charger.h" -#include "console.h" -#include "driver/charger/sm5803.h" -#include "extpower.h" -#include "usb_pd.h" -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = sm5803_is_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -/* - * Nereid does not have a GPIO indicating whether extpower is present, - * so detect using the charger(s). - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; -} - -__override void board_hibernate(void) -{ - /* Shut down the chargers */ - if (board_get_usb_pd_port_count() == 2) - sm5803_hibernate(CHARGER_SECONDARY); - sm5803_hibernate(CHARGER_PRIMARY); - LOG_INF("Charger(s) hibernated"); - cflush(); -} diff --git a/zephyr/projects/nissa/nereid/src/hdmi.c b/zephyr/projects/nissa/nereid/src/hdmi.c deleted file mode 100644 index 7e5708c6eb..0000000000 --- a/zephyr/projects/nissa/nereid/src/hdmi.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros_board_info.h> -#include "nissa_hdmi.h" - -__override void nissa_configure_hdmi_power_gpios(void) -{ - /* - * Nereid versions before 2 need hdmi-en-odl to be - * pulled down to enable VCC on the HDMI port, but later - * versions (and other boards) disconnect this so - * the port's VCC directly follows en-rails-odl. Only - * configure the GPIO if needed, to save power. - */ - uint32_t board_version = 0; - - /* CBI errors ignored, will configure the pin */ - cbi_get_board_version(&board_version); - if (board_version < 2) { - nissa_configure_hdmi_vcc(); - } - - /* Still always need core rails controlled */ - nissa_configure_hdmi_rails(); -} diff --git a/zephyr/projects/nissa/nereid/src/keyboard.c b/zephyr/projects/nissa/nereid/src/keyboard.c deleted file mode 100644 index b69bb4da33..0000000000 --- a/zephyr/projects/nissa/nereid/src/keyboard.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "ec_commands.h" - -static const struct ec_response_keybd_config nereid_kb_legacy = { - .num_top_row_keys = 10, - .action_keys = { - TK_BACK, /* T1 */ - TK_FORWARD, /* T2 */ - TK_REFRESH, /* T3 */ - TK_FULLSCREEN, /* T4 */ - TK_OVERVIEW, /* T5 */ - TK_BRIGHTNESS_DOWN, /* T6 */ - TK_BRIGHTNESS_UP, /* T7 */ - TK_VOL_MUTE, /* T8 */ - TK_VOL_DOWN, /* T9 */ - TK_VOL_UP, /* T10 */ - }, - .capabilities = KEYBD_CAP_SCRNLOCK_KEY, -}; - -__override const struct ec_response_keybd_config * -board_vivaldi_keybd_config(void) -{ - return &nereid_kb_legacy; -} diff --git a/zephyr/projects/nissa/nereid/src/usbc.c b/zephyr/projects/nissa/nereid/src/usbc.c deleted file mode 100644 index 48f7cfd9cb..0000000000 --- a/zephyr/projects/nissa/nereid/src/usbc.c +++ /dev/null @@ -1,393 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> -#include <ap_power/ap_power.h> - -#include "charge_state_v2.h" -#include "chipset.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" -#include "driver/charger/sm5803.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/tcpm/ps8xxx_public.h" -#include "driver/tcpm/tcpci.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, - { - /* - * Sub-board: optional PS8745 TCPC+redriver. Behaves the same - * as PS8815. - */ - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C1_TCPC, - .addr_flags = PS8XXX_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - /* PS8745 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0, - }, -}; - -/* Vconn control for integrated ITE TCPC */ -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ - /* Vconn control is only for port 0 */ - if (port) - return; - - if (cc_pin == USBPD_CC_PIN_1) - gpio_pin_set_dt( - GPIO_DT_FROM_NODELABEL(gpio_en_usb_c0_cc1_vconn), - !!enabled); - else - gpio_pin_set_dt( - GPIO_DT_FROM_NODELABEL(gpio_en_usb_c0_cc2_vconn), - !!enabled); -} - -__override bool pd_check_vbus_level(int port, enum vbus_level level) -{ - return sm5803_check_vbus_level(port, level); -} - -/* - * Putting chargers into LPM when in suspend reduces power draw by about 8mW - * per charger, but also seems critical to correct operation in source mode: - * if chargers are not in LPM when a sink is first connected, VBUS sourcing - * works even if the partner is later removed (causing LPM entry) and - * reconnected (causing LPM exit). If in LPM initially, sourcing VBUS - * consistently causes the charger to report (apparently spurious) overcurrent - * failures. - * - * In short, this is important to making things work correctly but we don't - * understand why. - */ -static void board_chargers_suspend(struct ap_power_ev_callback *const cb, - const struct ap_power_ev_data data) -{ - void (*fn)(int chgnum); - - switch (data.event) { - case AP_POWER_SUSPEND: - fn = sm5803_enable_low_power_mode; - break; - case AP_POWER_RESUME: - fn = sm5803_disable_low_power_mode; - break; - default: - LOG_WRN("%s: power event %d is not recognized", __func__, - data.event); - return; - } - - fn(CHARGER_PRIMARY); - if (board_get_charger_chip_count() > 1) - fn(CHARGER_SECONDARY); -} - -static int board_chargers_suspend_init(const struct device *unused) -{ - static struct ap_power_ev_callback cb = { - .handler = board_chargers_suspend, - .events = AP_POWER_SUSPEND | AP_POWER_RESUME, - }; - ap_power_ev_add_callback(&cb); - return 0; -} -SYS_INIT(board_chargers_suspend_init, APPLICATION, 0); - -int board_set_active_charge_port(int port) -{ - int is_real_port = (port >= 0 && port < board_get_usb_pd_port_count()); - int i; - int old_port; - int rv; - - if (!is_real_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - old_port = charge_manager_get_active_charge_port(); - LOG_INF("Charge update: p%d -> p%d", old_port, port); - - /* Check if port is sourcing VBUS. */ - if (port != CHARGE_PORT_NONE && charger_is_sourcing_otg_power(port)) { - LOG_WRN("Skip enable p%d: already sourcing", port); - return EC_ERROR_INVAL; - } - - /* Disable sinking on all ports except the desired one */ - for (i = 0; i < board_get_usb_pd_port_count(); i++) { - if (i == port) - continue; - - if (sm5803_vbus_sink_enable(i, 0)) - /* - * Do not early-return because this can fail during - * power-on which would put us into a loop. - */ - LOG_WRN("p%d: sink path disable failed.", i); - } - - /* Don't enable anything (stop here) if no ports were requested */ - if ((port == CHARGE_PORT_NONE) || (old_port == port)) - return EC_SUCCESS; - - /* - * Stop the charger IC from switching while changing ports. Otherwise, - * we can overcurrent the adapter we're switching to. (crbug.com/926056) - */ - if (old_port != CHARGE_PORT_NONE) - charger_discharge_on_ac(1); - - /* Enable requested charge port. */ - rv = sm5803_vbus_sink_enable(port, 1); - if (rv) - LOG_WRN("p%d: sink path enable failed: code %d", port, rv); - - /* Allow the charger IC to begin/continue switching. */ - charger_discharge_on_ac(0); - - return rv; -} - -uint16_t tcpc_get_alert_status(void) -{ - /* - * TCPC 0 is embedded in the EC and processes interrupts in the chip - * code (it83xx/intc.c). This function only needs to poll port C1 if - * present. - */ - uint16_t status = 0; - int regval; - - /* Is the C1 port present and its IRQ line asserted? */ - if (board_get_usb_pd_port_count() == 2 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - /* - * C1 IRQ is shared between BC1.2 and TCPC; poll TCPC to see if - * it asserted the IRQ. - */ - if (!tcpc_read16(1, TCPC_REG_ALERT, ®val)) { - if (regval) - status = PD_STATUS_TCPC_ALERT_1; - } - } - - return status; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - if (port < 0 || port >= board_get_usb_pd_port_count()) - return; - - prev_en = charger_is_sourcing_otg_power(port); - - /* Disable Vbus */ - charger_enable_otg_power(port, 0); - - /* Discharge Vbus if previously enabled */ - if (prev_en) - sm5803_set_vbus_disch(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - enum ec_error_list rv; - - if (port < 0 || port > board_get_usb_pd_port_count()) { - LOG_WRN("Port C%d does not exist, cannot enable VBUS", port); - return EC_ERROR_INVAL; - } - - /* Disable sinking */ - rv = sm5803_vbus_sink_enable(port, 0); - if (rv) { - LOG_WRN("C%d failed to disable sinking: %d", port, rv); - return rv; - } - - /* Disable Vbus discharge */ - rv = sm5803_set_vbus_disch(port, 0); - if (rv) { - LOG_WRN("C%d failed to clear VBUS discharge: %d", port, rv); - return rv; - } - - /* Provide Vbus */ - rv = charger_enable_otg_power(port, 1); - if (rv) { - LOG_WRN("C%d failed to enable VBUS sourcing: %d", port, rv); - return rv; - } - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - int rv; - const int current = rp == TYPEC_RP_3A0 ? 3000 : 1500; - - rv = charger_set_otg_current_voltage(port, current, 5000); - if (rv != EC_SUCCESS) { - LOG_WRN("Failed to set source ilimit on port %d to %d: %d", - port, current, rv); - } -} - -void board_reset_pd_mcu(void) -{ - /* - * Do nothing. The integrated TCPC for C0 lacks a dedicated reset - * command, and C1 (if present) doesn't have a reset pin connected - * to the EC. - */ -} - -#define INT_RECHECK_US 5000 - -/* C0 interrupt line shared by BC 1.2 and charger */ - -static void check_c0_line(void); -DECLARE_DEFERRED(check_c0_line); - -static void notify_c0_chips(void) -{ - usb_charger_task_set_event(0, USB_CHG_EVENT_BC12); - sm5803_interrupt(0); -} - -static void check_c0_line(void) -{ - /* - * If line is still being held low, see if there's more to process from - * one of the chips - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl))) { - notify_c0_chips(); - hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); - } -} - -void usb_c0_interrupt(enum gpio_signal s) -{ - /* Cancel any previous calls to check the interrupt line */ - hook_call_deferred(&check_c0_line_data, -1); - - /* Notify all chips using this line that an interrupt came in */ - notify_c0_chips(); - - /* Check the line again in 5ms */ - hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); -} - -/* C1 interrupt line shared by BC 1.2, TCPC, and charger */ -static void check_c1_line(void); -DECLARE_DEFERRED(check_c1_line); - -static void notify_c1_chips(void) -{ - schedule_deferred_pd_interrupt(1); - usb_charger_task_set_event(1, USB_CHG_EVENT_BC12); - /* Charger is handled in board_process_pd_alert */ -} - -static void check_c1_line(void) -{ - /* - * If line is still being held low, see if there's more to process from - * one of the chips. - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - notify_c1_chips(); - hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); - } -} - -void usb_c1_interrupt(enum gpio_signal s) -{ - /* Cancel any previous calls to check the interrupt line */ - hook_call_deferred(&check_c1_line_data, -1); - - /* Notify all chips using this line that an interrupt came in */ - notify_c1_chips(); - - /* Check the line again in 5ms */ - hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); -} - -/* - * Check state of IRQ lines at startup, ensuring an IRQ that happened before - * the EC started up won't get lost (leaving the IRQ line asserted and blocking - * any further interrupts on the port). - * - * Although the PD task will check for pending TCPC interrupts on startup, - * the charger sharing the IRQ will not be polled automatically. - */ -void board_handle_initial_typec_irq(void) -{ - check_c0_line(); - if (board_get_usb_pd_port_count() == 2) - check_c1_line(); -} -/* - * This must run after sub-board detection (which happens in EC main()), - * but isn't depended on by anything else either. - */ -DECLARE_HOOK(HOOK_INIT, board_handle_initial_typec_irq, HOOK_PRIO_LAST); - -/* - * Handle charger interrupts in the PD task. Not doing so can lead to a priority - * inversion where we fail to respond to TCPC alerts quickly enough because we - * don't get another edge on a shared IRQ until the charger interrupt is cleared - * (or the IRQ is polled again), which happens in the low-priority charger task: - * the high-priority type-C handler is thus blocked on the lower-priority - * charger. - * - * To avoid that, we run charger interrupts at the same priority. - */ -void board_process_pd_alert(int port) -{ - /* - * Port 0 doesn't use an external TCPC, so its interrupts don't need - * this special handling. - */ - if (port == 1 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - sm5803_handle_interrupt(port); - } -} - -int pd_snk_is_vbus_provided(int port) -{ - int chg_det = 0; - - sm5803_get_chg_det(port, &chg_det); - - return chg_det; -} diff --git a/zephyr/projects/nissa/nissa.csv b/zephyr/projects/nissa/nissa.csv deleted file mode 100644 index 45b73ea229..0000000000 --- a/zephyr/projects/nissa/nissa.csv +++ /dev/null @@ -1,122 +0,0 @@ -Signal Name,Subsystem,Description,DIR,Int,I/O Type,Internal PU,I/O Voltage,ICs attached,NPCX993 (Nivviks),NPCX993 (Nirwen),IT81302 (Nereid),Type,Enum,SW Notes,HW Notes
-ESPI_SOC_CLK,ESPI,ESPI clock,IN,no,--,N,1.80 V,,M1,M1,L1,OTHER,,,
-ESPI_SOC_CS_EC_L,ESPI,ESPI chip select,IN,F,--,N,1.80 V,,L2,L2,J2,OTHER,,,
-ESPI_SOC_D0_EC,ESPI,ESPI DATA0,I/O,,TTL,N,1.80 V,,H1,H1,L2,OTHER,,,
-ESPI_SOC_D1_EC,ESPI,ESPI DATA1,I/O,,TTL,N,1.80 V,,J1,J1,K1,OTHER,,,
-ESPI_SOC_D2_EC,ESPI,ESPI DATA2,I/O,,TTL,N,1.80 V,,K1,K1,K2,OTHER,,,
-ESPI_SOC_D3_EC,ESPI,ESPI DATA3,I/O,,TTL,N,1.80 V,,L1,L1,J1,OTHER,,,
-ESPI_SOC_RST_EC_L,ESPI,ESPI reset,IN,F,,N,1.80 V,,K3,K3,R5,OTHER,,,
-ESPI_EC_ALERT_SOC_L,ESPI,ESPI Alert,OUT,,TTL,N,1.80 V,,L3,L3,H1,OTHER,,,
-GSC_EC_PWR_BTN_ODL,GSC,Power Button input from GSC,IN,both,--,Y,3.30 V,,E7,E7,B13,INPUT_PU,GPIO_POWER_BUTTON_L,GPIO00,
-EC_RST_ODL,GSC,Reset signal for EC from GSC,IN,no,--,N,3.30 V,GSC,K6,K6,M2,OTHER,,,
-EC_GSC_PACKET_MODE,GSC,Wakes/interrupts GSC and (maybe) vice-versa,I/O,both,--,N,3.30 V,,J6,J6,F9,OUTPUT,GPIO_PACKET_MODE_EN,,
-EC_I2C_EEPROM_SCL,I2C,"I2C clock for CBI, reading INAs, programming EC (ITE only)",I/O,,OD,N,3.30 V,"EEPROMs, INAs",C12,C12,A5,I2C_CLOCK,I2C_PORT_EEPROM,,
-EC_I2C_EEPROM_SDA,I2C,"I2C data for CBI, reading INAs, programming EC (ITE only)",I/O,,OD,N,3.30 V,"EEPROMs, INAs",B12,B12,B3,I2C_DATA,,,
-EC_I2C_BATT_SDA,I2C,I2C data for battery pack,I/O,,OD,N,3.30 V,Battery Pack,K10,K10,A3,I2C_DATA,,,
-EC_I2C_BATT_SCL,I2C,I2C clock for battery pack,I/O,,OD,N,3.30 V,Battery Pack,J10,J10,A4,I2C_CLOCK,I2C_PORT_BATTERY,,
-EC_I2C_SENSOR_SCL,I2C,I2C clock for sensors,I/O,,OD,N,3.30 V,"IMU, accel, lid accel, kb bl",K8,K8,C2,I2C_CLOCK,I2C_PORT_SENSOR,,
-EC_I2C_SENSOR_SDA,I2C,I2C data for sensors,I/O,,OD,N,3.30 V,"IMU, accel, lid accel, kb bl",K7,K7,D2,I2C_DATA,,,
-EC_I2C_USB_C0_SDA,I2C,I2C clock for USB-C C0 and USB-A A0 port ICs,I/O,,OD,N,3.30 V,"TCPC, BC1.2, Charger",F9,F9,K7,I2C_DATA,,,
-EC_I2C_USB_C0_SCL,I2C,I2C data for USB-C C0 and USB-A A0 port ICs,I/O,,OD,N,3.30 V,"TCPC, BC1.2, Charger",F8,F8,L7,I2C_CLOCK,I2C_PORT_USB_C0_TCPC,,
-EC_I2C_SUB_USB_C1_SDA,I2C,I2C clock for USB-C C1 and USB-A A1 port ICs (HDMI: HDMI_EN_SUB_ODL - enable HDMI retimer/output/active low),I/O,,OD,N,3.30 V,"TCPC, BC1.2, Charger",E9,E9,R4,I2C_DATA,,,
-EC_I2C_SUB_USB_C1_SCL,I2C,"I2C data for USB-C C1 and USB-A A1 port ICs (HDMI_HPD_SUB_ODL, hot-plug detection/input (interrupt)/active low)",I/O,,OD,N,3.30 V,"TCPC, BC1.2, Charger",E8,E8,P3,I2C_CLOCK,I2C_PORT_USB_C1_TCPC,,
-EC_KSI_00,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,A2,A2,K15,OTHER,,,
-KSI_01,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,A3,A3,K14,OTHER,,,
-EC_KSI_02,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,A4,A4,K10,OTHER,,,
-EC_KSI_03,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,B3,B3,J15,OTHER,,,Vivaldi Support
-KSI_04,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,B4,B4,J10,OTHER,,,
-KSI_05,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,C3,C3,J11,OTHER,,,
-KSI_06,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,C4,C4,J14,OTHER,,,
-KSI_07,Keyboard,Keyboard Input,IN,no,--,Y,3.30 V,,C5,C5,H10,OTHER,,,
-KSO_00,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,B5,B5,R9,OTHER,,,
-KSO_01,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,B6,B6,K8,OTHER,,,
-EC_KSO_02_INV,Keyboard,Keyboard Output,OUT,,TTL,N,3.30 V,,B7,B7,P10,OUTPUT_L,,KEYBOARD_COL2_INVERTED,
-KSO_03,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,B8,B8,R10,OTHER,,,
-KSO_04,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,C7,C7,L9,OTHER,,,
-KSO_05,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,C6,C6,K9,OTHER,,,
-KSO_06,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,C8,C8,P11,OTHER,,,
-KSO_07,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,B9,B9,R11,OTHER,,,
-KSO_08,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,C9,C9,P12,OTHER,,,
-KSO_09,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,C10,C10,L10,OTHER,,,
-KSO_10,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,B11,B11,P13,OTHER,,,
-KSO_11,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,B10,B10,P14,OTHER,,,
-KSO_12,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,C11,C11,N14,OTHER,,,
-KSO_13,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,D11,D11,M15,OTHER,,,Required only for NUM PAD
-KSO_14,Keyboard,Keyboard Output,OUT,,OD,N,3.30 V,,D6,D6,M14,OTHER,,,Required only for NUM PAD
-EN_KB_BL,MISC,Enable Keyboard backlight,OUT,,TTL,N,3.30 V,,G11,G11,D14,OUTPUT,GPIO_EN_KEYBOARD_BACKLIGHT,,
-VOLDN_BTN_ODL,MISC,Volume down signal,IN,both,--,Y,3.30 V,Button,F12,E11,G15,INPUT_PU,GPIO_VOLUME_DOWN_L,,
-VOLUP_BTN_ODL,MISC,Volume up signal,IN,both,--,Y,3.30 V,Button,E11,F12,F14,INPUT_PU,GPIO_VOLUME_UP_L,,
-LID_OPEN,MISC,Indicator from lid switch that lid is open,IN,both,--,N,3.30 V,,G7,G7,A11,INPUT,GPIO_LID_OPEN,,
-TABLET_MODE_L,MISC,Indicator from lid switch that lid is flipped all the way around,IN,both,--,N,3.30 V,,M12,M12,L8,INPUT,GPIO_TABLET_MODE_L,,Not required to connect to EC?
-IMU_INT_L,MISC,Interrupt from base intertial measurement unit,IN,falling,,N,1.80 V,IMU,M2,M2,F15,INPUT,,,
-ACC_INT_L,MISC,Interrupt from lid accel (only in convertibles),IN,falling,,N,1.80 V,ACC,G10,G10,E2,INPUT,,,Not required from Dedede?
-EC_WP_ODL,MISC,Write protection status from GSC,IN,no,--,N,3.30 V,GSC,L12,L12,R8,INPUT_L,,,
-EC_EDP_BL_EN_OD,MISC,EC override of backlight enable,OUT,,OD,N,3.30 V,,E10,E10,R15,OUTPUT_ODR,GPIO_ENABLE_BACKLIGHT,,
-TEMP_SENSOR_1,MISC,NTC 1 - near memory,IN,no,ADC,N,ANA,,F2,F2,H15,ADC,ADC_TEMP_SENSOR_1,,
-TEMP_SENSOR_2,MISC,NTC 2 - near chassis hot spot,IN,no,ADC,N,ANA,,E3,E3,G10,ADC,ADC_TEMP_SENSOR_2,,
-TEMP_SENSOR_3,MISC,NTC 3 - Ambient/skin temp,IN,no,ADC,N,ANA,,,F4,A13,ADC,ADC_TEMP_SENSOR_3,,
-USB_C0_INT_ODL,MISC,Interrupt for all ICs for Type-C port 0,IN,,--,Y,3.30 V,,E6,E6,P1,INPUT_PU,,,
-USB_C0_PROT_FAULT_ODL,MISC,Fault out of the USB C0 protection IC,IN,falling,OD,Y,3.30 V,,,#N/A,,,,,
-"SUB_USB_C1_INT_ODL
-(HDMI: EN_SUB_RAILS_ODL)",MISC,"Interrupt for all ICs for Type-C port 1 or the sub-board
-HDMI: Enable 5V power rail/output/active low",IN,,--,Y,3.30 V,,F7,F7,N2,OTHER,,,
-HDMI_SEL,MISC,Configures AUX to be HDMI DDC,OUT,,TTL,N,3.30 V,,D10,D10,F2,OUTPUT,,,
-CCD_MODE_ODL,MISC,Indicates whether H1 is using SBU lines for debug. Also can trigger CCD if the EC decides to.,I/O,falling,--/OD,N,3.30 V,GSC,A12,A12,B9,INPUT,GPIO_CCD_MODE_ODL,,
-EC_BATTERY_PRES_ODL,MISC,or BATT_TEMP - indication of battery presence,IN,,--,N,3.30 V,Battery pack,K12,K12,G14,INPUT,GPIO_BATT_PRES_ODL,,
-EC_ENTERING_RW,MISC,Indicate when EC is transitioning to RW code,OUT,,TTL,N,3.30 V,GSC,D9,D9,N1,OUTPUT,GPIO_ENTERING_RW,,
-EN_USB_A0_VBUS,MISC,,OUT,,TTL,N,3.30 V,,K9,K9,B1,OUTPUT,,,
-USB_A0_ILIMIT_SDP,MISC,,OUT,,TTL,N,3.30 V,,J8,J8,A1,OUTPUT,GPIO_USB1_ILIM_SEL,??,
-EN_SUB_USB_A1_VBUS,MISC,,OUT,,TTL,N,3.30 V,,A9,A9,B12,OTHER,,??,
-SUB_USB_A1_ILIMIT_SDP,MISC,,OUT,,TTL,N,3.30 V,,A10,A10,A12,OUTPUT,GPIO_USB2_ILIM_SEL,??,
-PWM_FAN,MISC,,OUT,,PWM,N,3.30 V,,,J7,,PWM,,,
-EC_FAN_TACH,MISC,,IN,,,,5.00 V,,,G5,,TACH,,,
-EN_PP5000_FAN_X,MISC,,OUT,,TTL,N,3.30 V,,,J2,,OUTPUT,,,
-EC_CBI_WP,MISC,Updated EC WP method,OUT,,TTL,N,3.30 V,,H5,H5,D15,OUTPUT,,cbi_latch_eeprom_wp,
-IMVP91_VRRDY_OD,POWER SEQUENCE,,IN,,,,,,E2,E2,C14,INPUT,,,
-EC_SOC_SYS_PWROK,POWER SEQUENCE,"Generic power good input to PCH (platform specific), system ready to exit reset.",OUT,,TTL,N,3.30 V,SOC,C1,C1,B11,OUTPUT,,PCH_PWROK,
-EN_SLP_Z,POWER SEQUENCE,Enable Sleep State (Active high). For ITE only.,OUT,,TTL,N,3.30 V,,F3,F3,R3,OUTPUT,,,
-EN_PP5000_S5,POWER SEQUENCE,"Enable PP5000_S5. Figure 523, states this has to come after 3.3V , why?",OUT,,TTL,N,3.30 V,,E5,E5,R14,OUTPUT,,,
-EN_PP3300_S5,POWER SEQUENCE,Enable PP3300_S5.,OUT,,TTL,N,3.30 V,,L9,L9,K11,OUTPUT,GPIO_TEMP_SENSOR_POWER,,
-EC_SOC_DSW_PWROK,POWER SEQUENCE,DSW Power is OK to AP (diode logic with PP3300_PG),OUT,,TTL,N,3.30 V,SOC,K4,K4,C1,OUTPUT,,,
-EC_SOC_RSMRST_L,POWER SEQUENCE,"Asserted after S5-rails are stable, buffered to SOC from EC",OUT,,TTL,N,3.30 V,SOC,F11,F11,E9,OUTPUT,,,
-RSMRST_PWRGD_L,POWER SEQUENCE,,IN,both,--,Y,3.30 V,,M11,M11,B14,INPUT_PU,,,
-SLP_SUS_L,POWER SEQUENCE,"If high, EC must keep S5 on, used in both DSx and non-DSx platforms.",IN,both,--,N,3.30 V,,H2,H2,F8,INPUT,,,No virtual wire over eSPI
-SLP_S4_L,POWER SEQUENCE,"PCH S4 Sleep control. When low, shut-off power to all non critical systems in S4 and lower.",IN,both,--,N,3.30 V,,J4,J4,G11,INPUT,,,This signal is also virtual wire on the eSPI interface.
-SLP_S3_L,POWER SEQUENCE,"PCH S3 Sleep control. When low, shut-off power to all non critical systems in S3 and lower.",IN,both,--,N,3.30 V,,K11,K11,B10,INPUT,,,This signal is also virtual wire on the eSPI interface.
-SLP_S0_L,POWER SEQUENCE,"PCH S0 Sleep control, asserted when PCH = idle & CPU = C10",IN,both,--,N,3.30 V,,L10,L10,F1,INPUT,,,No virtual wire over eSPI
-CPU_C10_GATE_L,POWER SEQUENCE,Asserted low when going into CPU_C10,IN,both,--,N,3.30 V,"SOC, VRs, LS",J3,J3,B6,INPUT,,??,
-EC_VSENSE_PP3300_S5,POWER SEQUENCE,Voltage sense (or PGOOD) for PP3300_S5,IN,no,ADC,N,ANA,,B2,B2,H11,ADC,ADC_PP3300_S5,??,"Nuvoton VREF=2.816V, ITE VREF = AVCC or AVCC/1.1 (3V)"
-PG_PP5000_S5_OD,POWER SEQUENCE,PP5000_S5 power good signal.,IN,,--,N,3.30 V,,D3,D3,C15,INPUT,,,
-EC_SOC_VCCST_PWRGD_OD,POWER SEQUENCE,,OUT,,OD,N,1.05 V,,H11,H11,P9,OUTPUT_ODR,,,
-EC_SOC_PCH_PWROK_OD,POWER SEQUENCE,,OUT,,OD,N,3.30 V,,M4,M4,R12,OUTPUT_ODR,,,
-ALL_SYS_PWRGD,POWER SEQUENCE,,IN,both,,N,3.30 V,,J11,J11,B2,INPUT,,,Figure 398 PDG 0.5
-PG_PP1050_MEM_S3_OD,POWER SEQUENCE,,IN,both,--,N,3.30 V,,D2,D2,P5,INPUT,,??,
-EC_VSENSE_PP1050_PROC,POWER SEQUENCE,,IN,no,ADC,N,ANA,SOC,C2,C2,A14,ADC,ADC_PP1050_PROC,PP1050_PROC monitoring from FIVR output,
-SYS_RST_ODL,POWER SEQUENCE,Reset for SOC,OUT,,OD,N,3.30 V,SOC,H7,H7,P4,OUTPUT_ODR,,,
-EC_PCH_WAKE_ODL,POWER SEQUENCE,"Allows EC to wake AP (e.g., keyboard out of S0ix)",OUT,,OD,N,3.30 V,SOC,L11,L11,E1,OUTPUT_ODL,,EC_SOC_WAKE_ODL on schematic; software uses PCH_WAKE name,
-EC_SOC_RTCRST,POWER SEQUENCE,Allows EC to reset logic on the AP's RTC well,OUT,,TTL,N,3.30 V,SOC,J5,J5,R2,OUTPUT,,,
-VCCIN_AUX_VID0,POWER SEQUENCE,Debug purposes,IN,both,,N,1.80 V,,L8,L8,P2,INPUT,,,
-VCCIN_AUX_VID1,POWER SEQUENCE,Debug purposes,IN,both,,N,1.80 V,,L7,L7,R1,INPUT,,,
-PWM_KB_BL,PWM,Keyboard backlight PWM control signal,OUT,,PWM,N,3.30 V,,H8,H8,R6,PWM,,,
-PWM_LED_1_ODL,PWM,LED 1,OUT,,PWM,N,3.30 V,,G8,G8,P6,PWM_INVERT,,,
-PWM_LED_2_ODL,PWM,LED 2,OUT,,PWM,N,3.30 V,,G9,G9,R7,PWM_INVERT,,,
-PWM_LED_3_ODL,PWM,LED 3,OUT,,PWM,N,3.30 V,,H10,H10,P7,PWM_INVERT,,,
-EC_PSYS,PWM,System power monitoring output,OUT,,PWM,N,ANA,"Charger, IMVP9.1",G6,G6,E15,OTHER,,,
-EC_SOC_PWR_BTN_ODL,SOC,Buffered power button signal from EC to SOC,OUT,,OD,N,3.30 V,SOC,H9,H9,J5,OUTPUT_ODR,GPIO_PCH_PWRBTN_L,,
-EC_SOC_HDMI_HPD,SOC,HPD buffer output for HDMI,OUT,,TTL,N,3.30 V,,L6,L6,P15,OUTPUT,,,
-EC_PROCHOT_ODL,SOC,Allows us to send/read PROCHOT,I/O,both,OD,N,1.05 V,SOC,G3,G3,H14,OUTPUT_ODR,,,
-EC_PCHHOT_ODL,SOC,Allows us to send/read PCHHOT,,,,,,,#N/A,#N/A,#N/A,OTHER,,,Intel confirmed that this feature is not used.
-EC_SOC_INT_ODL,SOC,EC interrupt to SOC,OUT,,OD,N,,,K5,K5,P8,OUTPUT_ODR,GPIO_EC_INT_L,,Is this needed?
-UART_GSC_DBG_RX_EC_TX,UART,UART signal from EC to debugger,OUT,,TTL,N,3.30 V,,H4,H4,B4,OTHER,,,
-UART_GSC_DBG_TX_EC_RX,UART,UART signal from debugger to EC,IN,,--,N,3.30 V,,G4,G4,B5,OTHER,,,
-EN_PP5000_PEN_X,MISC,Enable signal for 5V PEN charging rail,OUT,,TTL,N,3.30 V,,A11,A11,G2,OUTPUT,,,
-PEN_DETECT_ODL,MISC,"PEN detect signal. Internal debouncing, if required.",IN,both,--,Y,3.30 V,,G12,G12,E14,INPUT_PU,,,
-USB_C0_CC1,USB-PD,CC1 for IT81302 only,I/O,,CC,PD,ANA,,#N/A,#N/A,E10,OTHER,,,
-USB_C0_CC2,USB-PD,CC2 for IT81302 only,I/O,,CC,PD,ANA,,#N/A,#N/A,A10,OTHER,,,
-USB_C0_FRS,USB-PD,FRS for IT81302 only,OUT,,TTL,N,3.30 V,,#N/A,#N/A,D1,OUTPUT,,,
-EN_USB_C0_CC1_VCONN,USB-PD,CC1 vconn en for IT81302 only,OUT,,TTL,N,3.30 V,,#N/A,#N/A,A9,OUTPUT,,,
-EN_USB_C0_CC2_VCONN,USB-PD,CC2 vconn en for IT81302 only,OUT,,TTL,N,3.30 V,,#N/A,#N/A,A8,OUTPUT,,,
-EC_TRIS_L,DEBUG,Debug for NPCX993,,,,,,,E4,E4,#N/A,OTHER,,,
-EC_TEST_L,DEBUG,Debug for NPCX994,,,,,,,K2,K2,#N/A,OTHER,,,
-EC_32KXOUT,DEBUG,Debug for NPCX995,,,,,,,M5,M5,#N/A,OTHER,,,
-EC_SHDF_ESPI_L,DEBUG,Debug for NPCX996,,,,,,,H3,H3,#N/A,OTHER,,,
\ No newline at end of file diff --git a/zephyr/projects/nissa/nivviks/cbi.dtsi b/zephyr/projects/nissa/nivviks/cbi.dtsi deleted file mode 100644 index 112a2a885c..0000000000 --- a/zephyr/projects/nissa/nivviks/cbi.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - /* Nivviks-specific fw_config fields. */ - nissa-fw-config { - /* - * FW_CONFIG field to describe mainboard orientation in chassis. - */ - base-inversion { - enum-name = "FW_BASE_INVERSION"; - start = <3>; - size = <1>; - - inverted { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_BASE_INVERTED"; - value = <0>; - }; - regular { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_BASE_REGULAR"; - value = <1>; - default; - }; - }; - }; -}; diff --git a/zephyr/projects/nissa/nivviks/generated.dtsi b/zephyr/projects/nissa/nivviks/generated.dtsi deleted file mode 100644 index 91718302b4..0000000000 --- a/zephyr/projects/nissa/nivviks/generated.dtsi +++ /dev/null @@ -1,291 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * This file is auto-generated - do not edit! - */ - -/ { - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ec_vsense_pp1050_proc: ec_vsense_pp1050_proc { - enum-name = "ADC_PP1050_PROC"; - io-channels = <&adc0 4>; - }; - adc_ec_vsense_pp3300_s5: ec_vsense_pp3300_s5 { - enum-name = "ADC_PP3300_S5"; - io-channels = <&adc0 6>; - }; - adc_temp_sensor_1: temp_sensor_1 { - enum-name = "ADC_TEMP_SENSOR_1"; - io-channels = <&adc0 0>; - }; - adc_temp_sensor_2: temp_sensor_2 { - enum-name = "ADC_TEMP_SENSOR_2"; - io-channels = <&adc0 1>; - }; - adc_temp_sensor_3: temp_sensor_3 { - enum-name = "ADC_TEMP_SENSOR_3"; - io-channels = <&adc0 10>; - }; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_acc_int_l: acc_int_l { - gpios = <&gpio5 0 GPIO_INPUT>; - }; - gpio_all_sys_pwrgd: all_sys_pwrgd { - gpios = <&gpioa 7 GPIO_INPUT>; - }; - gpio_ccd_mode_odl: ccd_mode_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - gpio_cpu_c10_gate_l: cpu_c10_gate_l { - gpios = <&gpio6 7 GPIO_INPUT>; - }; - gpio_ec_battery_pres_odl: ec_battery_pres_odl { - gpios = <&gpioa 3 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - gpio_ec_cbi_wp: ec_cbi_wp { - gpios = <&gpio7 4 GPIO_OUTPUT>; - }; - gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - gpios = <&gpiod 3 GPIO_ODR_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_entering_rw: ec_entering_rw { - gpios = <&gpio0 3 GPIO_OUTPUT>; - enum-name = "GPIO_ENTERING_RW"; - }; - gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - gpios = <&gpio7 5 GPIO_OUTPUT>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_kso_02_inv: ec_kso_02_inv { - gpios = <&gpio1 7 (GPIO_OUTPUT_LOW | GPIO_ACTIVE_LOW)>; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_odl { - gpios = <&gpiob 0 GPIO_ODR_LOW>; - }; - gpio_ec_prochot_odl: ec_prochot_odl { - gpios = <&gpiof 1 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - gpios = <&gpio6 1 GPIO_OUTPUT>; - }; - gpio_ec_soc_hdmi_hpd: ec_soc_hdmi_hpd { - gpios = <&gpioe 4 GPIO_OUTPUT>; - }; - gpio_ec_soc_int_odl: ec_soc_int_odl { - gpios = <&gpio8 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - gpios = <&gpio7 2 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - gpios = <&gpioc 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - gpios = <&gpioa 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_rtcrst: ec_soc_rtcrst { - gpios = <&gpio7 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - gpios = <&gpio3 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - gpios = <&gpioa 4 GPIO_ODR_HIGH>; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpioa 1 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_en_kb_bl: en_kb_bl { - gpios = <&gpioa 0 GPIO_OUTPUT>; - enum-name = "GPIO_EN_KEYBOARD_BACKLIGHT"; - }; - gpio_en_pp3300_s5: en_pp3300_s5 { - gpios = <&gpiob 6 GPIO_OUTPUT>; - enum-name = "GPIO_TEMP_SENSOR_POWER"; - }; - gpio_en_pp5000_pen_x: en_pp5000_pen_x { - gpios = <&gpioe 2 GPIO_OUTPUT>; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpio4 0 GPIO_OUTPUT>; - }; - gpio_en_slp_z: en_slp_z { - gpios = <&gpioe 1 GPIO_OUTPUT>; - }; - gpio_en_usb_a0_vbus: en_usb_a0_vbus { - gpios = <&gpio9 1 GPIO_OUTPUT>; - }; - gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpio0 0 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_hdmi_sel: hdmi_sel { - gpios = <&gpioc 6 GPIO_OUTPUT>; - }; - gpio_imu_int_l: imu_int_l { - gpios = <&gpio5 6 GPIO_INPUT>; - }; - gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - gpios = <&gpio4 3 GPIO_INPUT>; - }; - gpio_lid_open: lid_open { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_pen_detect_odl: pen_detect_odl { - gpios = <&gpio9 6 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - gpios = <&gpiof 0 GPIO_INPUT>; - }; - gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - gpios = <&gpio4 2 GPIO_INPUT>; - }; - gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - gpios = <&gpio9 4 GPIO_INPUT_PULL_UP>; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpio9 7 GPIO_INPUT>; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioa 5 GPIO_INPUT>; - }; - gpio_slp_s4_l: slp_s4_l { - gpios = <&gpio7 0 GPIO_INPUT>; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpio6 2 GPIO_INPUT>; - }; - gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - gpios = <&gpiod 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB2_ILIM_SEL"; - }; - gpio_sys_rst_odl: sys_rst_odl { - gpios = <&gpioc 5 GPIO_ODR_HIGH>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpio9 5 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - gpios = <&gpio8 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB1_ILIM_SEL"; - }; - gpio_usb_c0_int_odl: usb_c0_int_odl { - gpios = <&gpio0 1 GPIO_INPUT_PULL_UP>; - }; - gpio_vccin_aux_vid0: vccin_aux_vid0 { - gpios = <&gpio9 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - gpio_vccin_aux_vid1: vccin_aux_vid1 { - gpios = <&gpioe 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - gpio_voldn_btn_odl: voldn_btn_odl { - gpios = <&gpioa 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_volup_btn_odl: volup_btn_odl { - gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - }; - - named-i2c-ports { - compatible = "named-i2c-ports"; - - i2c_ec_i2c_eeprom: ec_i2c_eeprom { - i2c-port = <&i2c0_0>; - enum-names = "I2C_PORT_EEPROM"; - }; - i2c_ec_i2c_sensor: ec_i2c_sensor { - i2c-port = <&i2c1_0>; - enum-names = "I2C_PORT_SENSOR"; - }; - i2c_ec_i2c_usb_c0: ec_i2c_usb_c0 { - i2c-port = <&i2c3_0>; - enum-names = "I2C_PORT_USB_C0_TCPC"; - }; - i2c_ec_i2c_sub_usb_c1: ec_i2c_sub_usb_c1 { - i2c-port = <&i2c5_1>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - }; - i2c_ec_i2c_batt: ec_i2c_batt { - i2c-port = <&i2c7_0>; - enum-names = "I2C_PORT_BATTERY"; - }; - }; -}; - -&adc0 { - status = "okay"; - pinctrl-0 = <&adc0_chan0_gp45 - &adc0_chan1_gp44 - &adc0_chan4_gp41 - &adc0_chan6_gp34 - &adc0_chan10_gpe0>; - pinctrl-names = "default"; -}; - - -&i2c0_0 { - status = "okay"; - pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; - pinctrl-names = "default"; -}; - -&i2c1_0 { - status = "okay"; - pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; - pinctrl-names = "default"; -}; - -&i2c3_0 { - status = "okay"; - pinctrl-0 = <&i2c3_0_sda_scl_gpd0_d1>; - pinctrl-names = "default"; -}; - -&i2c5_1 { - status = "okay"; - pinctrl-0 = <&i2c5_1_sda_scl_gpf4_f5>; - pinctrl-names = "default"; -}; - -&i2c7_0 { - status = "okay"; - pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; - pinctrl-names = "default"; -}; - -&i2c_ctrl0 { - status = "okay"; -}; - -&i2c_ctrl1 { - status = "okay"; -}; - -&i2c_ctrl3 { - status = "okay"; -}; - -&i2c_ctrl5 { - status = "okay"; -}; - -&i2c_ctrl7 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/nivviks/keyboard.dtsi b/zephyr/projects/nissa/nivviks/keyboard.dtsi deleted file mode 100644 index 00610e4e18..0000000000 --- a/zephyr/projects/nissa/nivviks/keyboard.dtsi +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - kblight { - compatible = "cros-ec,kblight-pwm"; - pwms = <&pwm6 6 PWM_HZ(2400) PWM_POLARITY_NORMAL>; - }; -}; - -&pwm6 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm6_gpc0>; - pinctrl-names = "default"; -}; - -&cros_kb_raw { - status = "okay"; - /* No KSO2 (it's inverted and implemented by GPIO) */ - pinctrl-0 = < - &ksi0_gp31 - &ksi1_gp30 - &ksi2_gp27 - &ksi3_gp26 - &ksi4_gp25 - &ksi5_gp24 - &ksi6_gp23 - &ksi7_gp22 - &kso00_gp21 - &kso01_gp20 - &kso03_gp16 - &kso04_gp15 - &kso05_gp14 - &kso06_gp13 - &kso07_gp12 - &kso08_gp11 - &kso09_gp10 - &kso10_gp07 - &kso11_gp06 - &kso12_gp05 - &kso13_gp04 - &kso14_gp82 - >; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/nivviks/motionsense.dtsi b/zephyr/projects/nissa/nivviks/motionsense.dtsi deleted file mode 100644 index 6297a07bf5..0000000000 --- a/zephyr/projects/nissa/nivviks/motionsense.dtsi +++ /dev/null @@ -1,166 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * Interrupt bindings for sensor devices. - */ - lsm6dso-int = &base_accel; - lis2dw12-int = &lid_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - lid_mutex: lid-mutex { - }; - - base_mutex: base-mutex { - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <(-1) 0 0 - 0 1 0 - 0 0 (-1)>; - }; - - base_rot_ref: base-rot-ref { - mat33 = <(-1) 0 0 - 0 (-1) 0 - 0 0 1>; - }; - - base_rot_inverted: base-rotation-inverted { - mat33 = <1 0 0 - 0 (-1) 0 - 0 0 (-1)>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - lsm6dso_accel_data: lsm6dso-accel-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - lsm6dso_gyro_data: lsm6dso-gyro-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - lis2dw12_data: lis2dw12-drv-data { - compatible = "cros-ec,drvdata-lis2dw12"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The nodelabel "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - * TODO(b/238139272): The first entries of the array must be - * accelerometers,then gyroscope. Fix this dependency in the DTS - * processing which makes the devicetree entries independent. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,lis2dw12"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&lis2dw12_data>; - i2c-spi-addr-flags = "LIS2DWL_ADDR0_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,lsm6dso-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - /* - * May be replaced by alternate depending - * on board config. - */ - rot-standard-ref = <&base_rot_ref>; - drv-data = <&lsm6dso_accel_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_gyro: base-gyro { - compatible = "cros-ec,lsm6dso-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <(1000 | ROUND_UP_FLAG)>; /* dps */ - drv-data = <&lsm6dso_gyro_data>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&int_imu>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel>; - }; -}; diff --git a/zephyr/projects/nissa/nivviks/overlay.dtsi b/zephyr/projects/nissa/nivviks/overlay.dtsi deleted file mode 100644 index c2d5e3f24b..0000000000 --- a/zephyr/projects/nissa/nivviks/overlay.dtsi +++ /dev/null @@ -1,418 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - aliases { - gpio-cbi-wp = &gpio_ec_cbi_wp; - gpio-wp = &gpio_ec_wp_odl; - int-wp = &int_wp_l; - gpio-kbd-kso2 = &gpio_ec_kso_02_inv; - }; - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; - - batteries { - default_battery: lgc { - compatible = "lgc,ap18c8k", "battery-smart"; - }; - lgc_ap19b8m { - compatible = "lgc,ap19b8m", "battery-smart"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-irqs = < - &int_power_button - &int_lid_open - >; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_power_button: power_button { - irq-pin = <&gpio_gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_wp_l: wp_l { - irq-pin = <&gpio_ec_wp_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_lid_open: lid_open { - irq-pin = <&gpio_lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_tablet_mode: tablet_mode { - irq-pin = <&gpio_tablet_mode_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "gmr_tablet_switch_isr"; - }; - int_imu: ec_imu { - irq-pin = <&gpio_imu_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "lsm6dso_interrupt"; - }; - int_vol_down: vol_down { - irq-pin = <&gpio_voldn_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_vol_up: vol_up { - irq-pin = <&gpio_volup_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_usb_c0: usb_c0 { - irq-pin = <&gpio_usb_c0_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_interrupt"; - }; - int_usb_c1: usb_c1 { - irq-pin = <&gpio_sb_1>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_interrupt"; - }; - }; - - named-gpios { - gpio_sb_1: sb-1 { - gpios = <&gpio0 2 GPIO_PULL_UP>; - no-auto-init; - }; - - gpio_sb_2: sb-2 { - gpios = <&gpiod 4 GPIO_OUTPUT>; - no-auto-init; - }; - - /* - * Set I2C pins for type C sub-board to be low voltage (I2C5_1). - * We do this for all boards, since the pins are 3.3V tolerant, - * and the only 2 types of sub-boards used on nivviks both have - * type-C ports on them. - */ - gpio_sb_3: sb-3 { - gpios = <&gpiof 4 (GPIO_OPEN_DRAIN | GPIO_VOLTAGE_1P8)>; - no-auto-init; - }; - gpio_sb_4: sb-4 { - gpios = <&gpiof 5 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - no-auto-init; - }; - gpio_fan_enable: fan-enable { - gpios = <&gpio6 3 GPIO_OUTPUT>; - no-auto-init; - }; - ec-i2c-sensor-scl { - gpios = <&gpio9 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - ec-i2c-sensor-sda { - gpios = <&gpio8 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - }; - - /* - * Aliases used for sub-board GPIOs. - */ - aliases { - /* - * Input GPIO when used with type-C port 1 - * Output when used with HDMI sub-board - */ - gpio-usb-c1-int-odl = &gpio_sb_1; - gpio-en-rails-odl = &gpio_sb_1; - /* - * Sub-board with type A USB, enable. - */ - gpio-en-usb-a1-vbus = &gpio_sb_2; - /* - * HPD pins for HDMI sub-board. - */ - gpio-hdmi-en-odl = &gpio_sb_3; - gpio-hpd-odl = &gpio_sb_4; - /* - * Enable S5 rails for LTE sub-board - */ - gpio-en-sub-s5-rails = &gpio_sb_2; - }; - - temp_memory: memory { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_1>; - }; - temp_charger: charger { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_2>; - }; - temp_ambient: ambient { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_3>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - memory { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_memory>; - }; - charger { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_charger>; - }; - ambient { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_ambient>; - }; - }; - - usba { - compatible = "cros-ec,usba-port-enable-pins"; - /* - * sb_2 is only configured as GPIO when USB-A1 is present, - * but it's still safe to control when disabled. - * - * ILIM_SEL pins are referred to by legacy enum name, - * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on - * sub-boards that don't have USB-A so is safe to control - * regardless of system configuration. - */ - enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>; - status = "okay"; - }; - - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - chg = <&chg_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_0>; - }; - }; - port0-muxes { - virtual_mux_0: virtual-mux-0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - /* - * TODO(b:211693800): port1 may not be present on some - * sub-boards. - */ - port1@1 { - compatible = "named-usbc-port"; - reg = <1>; - bc12 = <&bc12_port1>; - chg = <&chg_port1>; - usb-mux-chain-1 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_1 &anx7483_mux_1>; - }; - usb_mux_chain_1_no_mux: usb-mux-chain-1-no-mux { - compatible = "cros-ec,usb-mux-chain"; - alternative-chain; - usb-muxes = <&virtual_mux_1>; - }; - }; - port1-muxes { - virtual_mux_1: virtual-mux-1 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - }; - - fans { - compatible = "cros-ec,fans"; - - fan_0 { - pwms = <&pwm5 5 PWM_KHZ(1) PWM_POLARITY_NORMAL>; - rpm_min = <2200>; - rpm_start = <2200>; - rpm_max = <4200>; - tach = <&tach2>; - enable_gpio = <&gpio_fan_enable>; - }; - }; - - /* - * Declare unused GPIOs so that they are shut down - * and use minimal power - */ - unused-pins { - compatible = "unused-gpios"; - unused-gpios = - <&gpio3 2 0>, - <&gpio3 3 0>, - <&gpio3 5 0>, - <&gpio3 6 0>, - <&gpio5 7 0>, - <&gpio6 0 0>, - <&gpio6 3 0>, - <&gpio6 6 0>, - <&gpio7 3 0>, - <&gpio8 3 0>, - <&gpio8 6 0>, - <&gpiob 1 0>, - <&gpiob 7 0>, - <&gpioc 7 0>, - <&gpiof 2 0>, - <&gpiof 3 0>; - }; -}; - -&thermistor_3V3_51K1_47K_4050B { - status = "okay"; -}; - -&adc_ec_vsense_pp3300_s5 { - /* - * Voltage divider on input has 47k upper and 220k lower legs with - * 2714 mV full-scale reading on the ADC. Apply the largest possible - * multiplier (without overflowing int32) to get the best possible - * approximation of the actual ratio, but derate by a factor of two to - * ensure unexpectedly high values won't overflow. - */ - mul = <(791261 / 2)>; - div = <(651975 / 2)>; -}; - -/* Set bus speeds for I2C */ -&i2c0_0 { - label = "I2C_EEPROM"; - clock-frequency = <I2C_BITRATE_FAST>; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; -}; - -&i2c1_0 { - label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; -}; - -&i2c3_0 { - label = "I2C_USB_C0_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - /* - * BC1.2 interrupt is shared with TCPC, so - * IRQ is not specified here and handled by - * usb_c0_interrupt. - */ - }; - - chg_port0: isl923x@9 { - compatible = "intersil,isl923x"; - status = "okay"; - reg = <0x9>; - }; -}; - -&i2c5_1 { - label = "I2C_SUB_C1_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port1: isl923x@9 { - compatible = "intersil,isl923x"; - status = "okay"; - reg = <0x9>; - }; - - anx7483_mux_1: anx7483-mux-1@3e { - compatible = "analogix,anx7483"; - reg = <0x3e>; - board-set = "anx7483_set_default_tuning"; - }; -}; - -&i2c7_0 { - label = "I2C_BATTERY"; - clock-frequency = <I2C_BITRATE_STANDARD>; -}; - -&pwm5_gpb7 { - drive-open-drain; -}; - -&pwm5 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm5_gpb7>; - pinctrl-names = "default"; -}; - -/* Tachometer for fan speed measurement */ -&tach2 { - status = "okay"; - pinctrl-0 = <&ta2_1_in_gp73>; - pinctrl-names = "default"; - port = <NPCX_TACH_PORT_A>; /* port-A is selected */ - sample-clk = <NPCX_TACH_FREQ_LFCLK>; /* Use LFCLK as sampling clock */ - pulses-per-round = <2>; /* number of pulses per round of encoder */ -}; - -/* host interface */ -&espi0 { - status = "okay"; - pinctrl-0 = <&espi_lpc_gp46_47_51_52_53_54_55_57>; - pinctrl-names = "default"; -}; - -/* - * Declare GPIOs that have leakage current caused by board issues here. NPCX ec - * will disable their input buffers before entering deep sleep and restore them - * after waking up automatically for better power consumption. - */ -&power_leakage_io { - leak-gpios = <&gpioa 4 0 - &gpiof 1 0>; -}; diff --git a/zephyr/projects/nissa/nivviks/power_signals.dtsi b/zephyr/projects/nissa/nivviks/power_signals.dtsi deleted file mode 100644 index 1d2b23069d..0000000000 --- a/zephyr/projects/nissa/nivviks/power_signals.dtsi +++ /dev/null @@ -1,220 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - chosen { - intel-ap-pwrseq,espi = &espi0; - }; - - common-pwrseq { - compatible = "intel,ap-pwrseq"; - - sys-pwrok-delay = <10>; - all-sys-pwrgd-timeout = <20>; - }; - - pwr-en-pp5000-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP5000_S5 enable output to regulator"; - enum-name = "PWR_EN_PP5000_A"; - gpios = <&gpio4 0 0>; - output; - }; - pwr-en-pp3300-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP3300_S5 enable output to LS"; - enum-name = "PWR_EN_PP3300_A"; - gpios = <&gpiob 6 0>; - output; - }; - pwr-pg-ec-rsmrst-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST power good from regulator"; - enum-name = "PWR_RSMRST"; - gpios = <&gpio9 4 0>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-pch-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST output to PCH"; - enum-name = "PWR_EC_PCH_RSMRST"; - gpios = <&gpioa 6 0>; - output; - }; - pwr-slp-s0-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S0_L input from PCH"; - enum-name = "PWR_SLP_S0"; - gpios = <&gpio9 7 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-s3-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S3_L input from PCH"; - enum-name = "PWR_SLP_S3"; - gpios = <&gpioa 5 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-sus-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_SUS_L input from PCH"; - enum-name = "PWR_SLP_SUS"; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-soc-dsw-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "DSW_PWROK output to PCH"; - enum-name = "PWR_EC_SOC_DSW_PWROK"; - gpios = <&gpio6 1 0>; - output; - }; - pwr-vccst-pwrgd-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VCCST_PWRGD output to PCH"; - enum-name = "PWR_VCCST_PWRGD"; - gpios = <&gpioa 4 GPIO_OPEN_DRAIN>; - output; - }; - pwr-imvp9-vrrdy-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VRRDY input from IMVP9"; - enum-name = "PWR_IMVP9_VRRDY"; - gpios = <&gpio4 3 0>; - }; - pwr-pch-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PCH_PWROK output to PCH"; - enum-name = "PWR_PCH_PWROK"; - gpios = <&gpio7 2 GPIO_OPEN_DRAIN>; - output; - }; - pwr-ec-pch-sys-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_PWROK output to PCH"; - enum-name = "PWR_EC_PCH_SYS_PWROK"; - gpios = <&gpio3 7 0>; - output; - }; - pwr-sys-rst-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_RESET# output to PCH"; - enum-name = "PWR_SYS_RST"; - gpios = <&gpioc 5 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; - output; - }; - pwr-slp-s4 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S4 virtual wire input from PCH"; - enum-name = "PWR_SLP_S4"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; - vw-invert; - }; - pwr-slp-s5 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S5 virtual wire input from PCH"; - enum-name = "PWR_SLP_S5"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; - vw-invert; - }; - pwr-all-sys-pwrgd { - compatible = "intel,ap-pwrseq-external"; - dbg-label = "Combined all power good"; - enum-name = "PWR_ALL_SYS_PWRGD"; - }; - pwr-adc-pp3300 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP3300 PWROK (from ADC)"; - enum-name = "PWR_DSW_PWROK"; - trigger-high = <&cmp_pp3300_s5_high>; - trigger-low = <&cmp_pp3300_s5_low>; - }; - pwr-adc-pp1p05 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP1P05 PWROK (from ADC)"; - enum-name = "PWR_PG_PP1P05"; - trigger-high = <&cmp_pp1p05_high>; - trigger-low = <&cmp_pp1p05_low>; - }; - - adc-cmp { - cmp_pp3300_s5_high: pp3300_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* - * This is 90% of nominal voltage considering voltage - * divider on ADC input. - */ - threshold-mv = <2448>; - }; - cmp_pp3300_s5_low: pp3300_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <2448>; - }; - cmp_pp1p05_high: pp1p05_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* Setting at 90% of nominal voltage */ - threshold-mv = <945>; - }; - cmp_pp1p05_low: pp1p05_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <945>; - }; - }; -}; - -/* - * Because the power signals directly reference the GPIOs, - * the correspinding named-gpios need to have no-auto-init set. - */ -&gpio_ec_soc_dsw_pwrok { - no-auto-init; -}; -&gpio_ec_soc_pch_pwrok_od { - no-auto-init; -}; -&gpio_ec_soc_rsmrst_l { - no-auto-init; -}; -&gpio_ec_soc_sys_pwrok { - no-auto-init; -}; -&gpio_ec_soc_vccst_pwrgd_od { - no-auto-init; -}; -&gpio_en_pp3300_s5 { - no-auto-init; -}; -&gpio_en_pp5000_s5 { - no-auto-init; -}; -&gpio_imvp91_vrrdy_od { - no-auto-init; -}; -&gpio_rsmrst_pwrgd_l { - no-auto-init; -}; -&gpio_slp_s0_l { - no-auto-init; -}; -&gpio_slp_s3_l { - no-auto-init; -}; -&gpio_slp_s4_l { - no-auto-init; -}; -&gpio_slp_sus_l { - no-auto-init; -}; -&gpio_sys_rst_odl { - no-auto-init; -}; diff --git a/zephyr/projects/nissa/nivviks/project.conf b/zephyr/projects/nissa/nivviks/project.conf deleted file mode 100644 index af9e4e2586..0000000000 --- a/zephyr/projects/nissa/nivviks/project.conf +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_BOARD_NIVVIKS=y -CONFIG_PLATFORM_EC_OCPC=y - -CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSO=y diff --git a/zephyr/projects/nissa/nivviks/project.overlay b/zephyr/projects/nissa/nivviks/project.overlay deleted file mode 100644 index 9ca681d979..0000000000 --- a/zephyr/projects/nissa/nivviks/project.overlay +++ /dev/null @@ -1,14 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "../cbi.dtsi" - -#include "cbi.dtsi" -#include "generated.dtsi" -#include "keyboard.dtsi" -#include "motionsense.dtsi" -#include "overlay.dtsi" -#include "power_signals.dtsi" -#include "pwm_leds.dtsi" diff --git a/zephyr/projects/nissa/nivviks/pwm_leds.dtsi b/zephyr/projects/nissa/nivviks/pwm_leds.dtsi deleted file mode 100644 index a265a5929e..0000000000 --- a/zephyr/projects/nissa/nivviks/pwm_leds.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - pwmleds { - compatible = "pwm-leds"; - pwm_led0: pwm_led_0 { - pwms = <&pwm2 2 PWM_HZ(324) PWM_POLARITY_INVERTED>, - <&pwm0 0 PWM_HZ(324) PWM_POLARITY_INVERTED>, - <&pwm1 1 PWM_HZ(324) PWM_POLARITY_INVERTED>; - }; - }; - - cros-pwmleds { - compatible = "cros-ec,pwm-leds"; - - leds = <&pwm_led0>; - - /*<red green blue>*/ - color-map-red = <100 0 0>; - color-map-green = < 0 100 0>; - color-map-blue = < 0 0 100>; - color-map-yellow = < 0 50 50>; - color-map-white = <100 100 100>; - color-map-amber = <100 0 0>; - - brightness-range = <0 0 100 0 0 100>; - - #address-cells = <1>; - #size-cells = <0>; - - pwm_led_0@0 { - reg = <0>; - ec-led-name = "EC_LED_ID_BATTERY_LED"; - }; - }; -}; - -/* Enable LEDs to work while CPU suspended */ - -&pwm0 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm0_gpc3>; - pinctrl-names = "default"; -}; - -&pwm1 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm1_gpc2>; - pinctrl-names = "default"; -}; - -&pwm2 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm2_gpc4>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/nivviks/src/charger.c b/zephyr/projects/nissa/nivviks/src/charger.c deleted file mode 100644 index e2f9f966e7..0000000000 --- a/zephyr/projects/nissa/nivviks/src/charger.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "battery.h" -#include "charger.h" -#include "charger/isl923x_public.h" -#include "console.h" -#include "extpower.h" -#include "usb_pd.h" -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = raa489000_is_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -/* - * Nivviks does not have a GPIO indicating whether extpower is present, - * so detect using the charger(s). - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; -} - -__override void board_hibernate(void) -{ - /* Shut down the chargers */ - if (board_get_usb_pd_port_count() == 2) - raa489000_hibernate(CHARGER_SECONDARY, true); - raa489000_hibernate(CHARGER_PRIMARY, true); - LOG_INF("Charger(s) hibernated"); - cflush(); -} diff --git a/zephyr/projects/nissa/nivviks/src/fan.c b/zephyr/projects/nissa/nivviks/src/fan.c deleted file mode 100644 index 840049722c..0000000000 --- a/zephyr/projects/nissa/nivviks/src/fan.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/devicetree.h> -#include <zephyr/drivers/gpio.h> -#include <zephyr/logging/log.h> - -#include "cros_cbi.h" -#include "fan.h" -#include "gpio/gpio.h" -#include "hooks.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -/* - * Nirwen fan support - */ -static void fan_init(void) -{ - int ret; - uint32_t val; - /* - * Retrieve the fan config. - */ - ret = cros_cbi_get_fw_config(FW_FAN, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", FW_FAN); - return; - } - if (val != FW_FAN_PRESENT) { - /* Disable the fan */ - fan_set_count(0); - } else { - /* Configure the fan enable GPIO */ - gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_fan_enable), - GPIO_OUTPUT); - } -} -DECLARE_HOOK(HOOK_INIT, fan_init, HOOK_PRIO_POST_FIRST); diff --git a/zephyr/projects/nissa/nivviks/src/form_factor.c b/zephyr/projects/nissa/nivviks/src/form_factor.c deleted file mode 100644 index 602b22baff..0000000000 --- a/zephyr/projects/nissa/nivviks/src/form_factor.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/devicetree.h> -#include <zephyr/logging/log.h> - -#include "accelgyro.h" -#include "cros_cbi.h" -#include "hooks.h" -#include "motionsense_sensors.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -/* - * Mainboard orientation support. - */ - -#define ALT_MAT SENSOR_ROT_STD_REF_NAME(DT_NODELABEL(base_rot_inverted)) -#define BASE_SENSOR SENSOR_ID(DT_NODELABEL(base_accel)) -#define BASE_GYRO SENSOR_ID(DT_NODELABEL(base_gyro)) - -static void form_factor_init(void) -{ - int ret; - uint32_t val; - /* - * If the firmware config indicates - * an inverted form factor, use the alternative - * rotation matrix. - */ - ret = cros_cbi_get_fw_config(FW_BASE_INVERSION, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", - FW_BASE_INVERSION); - return; - } - if (val == FW_BASE_INVERTED) { - LOG_INF("Switching to inverted base"); - motion_sensors[BASE_SENSOR].rot_standard_ref = &ALT_MAT; - motion_sensors[BASE_GYRO].rot_standard_ref = &ALT_MAT; - } -} -DECLARE_HOOK(HOOK_INIT, form_factor_init, HOOK_PRIO_POST_I2C); diff --git a/zephyr/projects/nissa/nivviks/src/keyboard.c b/zephyr/projects/nissa/nivviks/src/keyboard.c deleted file mode 100644 index f13d5bf78c..0000000000 --- a/zephyr/projects/nissa/nivviks/src/keyboard.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "ec_commands.h" - -static const struct ec_response_keybd_config nivviks_kb = { - .num_top_row_keys = 10, - .action_keys = { - TK_BACK, /* T1 */ - TK_REFRESH, /* T2 */ - TK_FULLSCREEN, /* T3 */ - TK_OVERVIEW, /* T4 */ - TK_SNAPSHOT, /* T5 */ - TK_BRIGHTNESS_DOWN, /* T6 */ - TK_BRIGHTNESS_UP, /* T7 */ - TK_VOL_MUTE, /* T8 */ - TK_VOL_DOWN, /* T9 */ - TK_VOL_UP, /* T10 */ - }, - .capabilities = KEYBD_CAP_SCRNLOCK_KEY, -}; - -__override const struct ec_response_keybd_config * -board_vivaldi_keybd_config(void) -{ - return &nivviks_kb; -} diff --git a/zephyr/projects/nissa/nivviks/src/led.c b/zephyr/projects/nissa/nivviks/src/led.c deleted file mode 100644 index 9087982604..0000000000 --- a/zephyr/projects/nissa/nivviks/src/led.c +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery LED control for nissa - */ -#include "common.h" -#include "ec_commands.h" -#include "led_common.h" -#include "led_onoff_states.h" -#include "led_pwm.h" - -__override const int led_charge_lvl_1 = 5; -__override const int led_charge_lvl_2 = 97; -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_LVL_2] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_FULL_CHARGE] = { { EC_LED_COLOR_BLUE, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S0] = { { EC_LED_COLOR_BLUE, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S0_BAT_LOW] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S3] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_DISCHARGE_S5] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_BATTERY_ERROR] = { { EC_LED_COLOR_AMBER, - 1 * LED_ONE_SEC }, - { LED_OFF, 1 * LED_ONE_SEC } }, - [STATE_FACTORY_TEST] = { { EC_LED_COLOR_AMBER, - 2 * LED_ONE_SEC }, - { EC_LED_COLOR_BLUE, - 2 * LED_ONE_SEC } }, - }; - -__override void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_BLUE: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_BLUE); - break; - case EC_LED_COLOR_AMBER: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_AMBER); - break; - default: /* LED_OFF and other unsupported colors */ - set_pwm_led_color(EC_LED_ID_BATTERY_LED, -1); - break; - } -} diff --git a/zephyr/projects/nissa/nivviks/src/usbc.c b/zephyr/projects/nissa/nivviks/src/usbc.c deleted file mode 100644 index 14fc5a071d..0000000000 --- a/zephyr/projects/nissa/nivviks/src/usbc.c +++ /dev/null @@ -1,277 +0,0 @@ -/* Copyright 2021 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "charge_state_v2.h" -#include "chipset.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" -#include "driver/charger/isl923x_public.h" -#include "driver/retimer/anx7483_public.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/raa489000.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C0_TCPC, - .addr_flags = RAA489000_TCPC0_I2C_FLAGS, - }, - .drv = &raa489000_tcpm_drv, - /* RAA489000 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_VBUS_MONITOR, - }, - { /* sub-board */ - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C1_TCPC, - .addr_flags = RAA489000_TCPC0_I2C_FLAGS, - }, - .drv = &raa489000_tcpm_drv, - /* RAA489000 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_VBUS_MONITOR, - }, -}; - -int board_is_sourcing_vbus(int port) -{ - int regval; - - tcpc_read(port, TCPC_REG_POWER_STATUS, ®val); - return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS); -} - -int board_set_active_charge_port(int port) -{ - int is_real_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - int old_port; - - if (!is_real_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - old_port = charge_manager_get_active_charge_port(); - - LOG_INF("New chg p%d", port); - - /* Disable all ports. */ - if (port == CHARGE_PORT_NONE) { - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW); - raa489000_enable_asgate(i, false); - } - - return EC_SUCCESS; - } - - /* Check if port is sourcing VBUS. */ - if (board_is_sourcing_vbus(port)) { - LOG_WRN("Skip enable p%d", port); - return EC_ERROR_INVAL; - } - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - if (i == port) - continue; - - if (tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW)) - LOG_WRN("p%d: sink path disable failed.", i); - raa489000_enable_asgate(i, false); - } - - /* - * Stop the charger IC from switching while changing ports. Otherwise, - * we can overcurrent the adapter we're switching to. (crbug.com/926056) - */ - if (old_port != CHARGE_PORT_NONE) - charger_discharge_on_ac(1); - - /* Enable requested charge port. */ - if (raa489000_enable_asgate(port, true) || - tcpc_write(port, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_HIGH)) { - LOG_WRN("p%d: sink path enable failed.", port); - charger_discharge_on_ac(0); - return EC_ERROR_UNKNOWN; - } - - /* Allow the charger IC to begin/continue switching. */ - charger_discharge_on_ac(0); - - return EC_SUCCESS; -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - int regval; - - /* - * The interrupt line is shared between the TCPC and BC1.2 detector IC. - * Therefore, go out and actually read the alert registers to report the - * alert status. - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl))) { - if (!tcpc_read16(0, TCPC_REG_ALERT, ®val)) { - /* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */ - if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0)) - regval &= ~((1 << 14) | (1 << 13) | (1 << 12)); - - if (regval) - status |= PD_STATUS_TCPC_ALERT_0; - } - } - - if (board_get_usb_pd_port_count() == 2 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - if (!tcpc_read16(1, TCPC_REG_ALERT, ®val)) { - /* TCPCI spec Rev 1.0 says to ignore bits 14:12. */ - if (!(tcpc_config[1].flags & TCPC_FLAGS_TCPCI_REV2_0)) - regval &= ~((1 << 14) | (1 << 13) | (1 << 12)); - - if (regval) - status |= PD_STATUS_TCPC_ALERT_1; - } - } - - return status; -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS */ - tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - if (port < 0 || port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return; - - raa489000_set_output_current(port, rp); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - if (port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return EC_ERROR_INVAL; - - /* Disable charging. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW); - if (rv) - return rv; - - /* Our policy is not to source VBUS when the AP is off. */ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - return EC_ERROR_NOT_POWERED; - - /* Provide Vbus. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH); - if (rv) - return rv; - - rv = raa489000_enable_asgate(port, true); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -void board_reset_pd_mcu(void) -{ - /* - * TODO(b:147316511): could send a reset command to the TCPC here - * if needed. - */ -} - -/* - * Because the TCPCs and BC1.2 chips share interrupt lines, it's possible - * for an interrupt to be lost if one asserts the IRQ, the other does the same - * then the first releases it: there will only be one falling edge to trigger - * the interrupt, and the line will be held low. We handle this by running a - * deferred check after a falling edge to see whether the IRQ is still being - * asserted. If it is, we assume an interrupt may have been lost and we need - * to poll each chip for events again. - */ -#define USBC_INT_POLL_DELAY_US 5000 - -static void poll_c0_int(void); -DECLARE_DEFERRED(poll_c0_int); -static void poll_c1_int(void); -DECLARE_DEFERRED(poll_c1_int); - -static void usbc_interrupt_trigger(int port) -{ - schedule_deferred_pd_interrupt(port); - usb_charger_task_set_event(port, USB_CHG_EVENT_BC12); -} - -static inline void poll_usb_gpio(int port, const struct gpio_dt_spec *gpio, - const struct deferred_data *ud) -{ - if (!gpio_pin_get_dt(gpio)) { - usbc_interrupt_trigger(port); - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); - } -} - -static void poll_c0_int(void) -{ - poll_usb_gpio(0, GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl), - &poll_c0_int_data); -} - -static void poll_c1_int(void) -{ - poll_usb_gpio(1, GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl), - &poll_c1_int_data); -} - -void usb_interrupt(enum gpio_signal signal) -{ - int port; - const struct deferred_data *ud; - - if (signal == GPIO_SIGNAL(DT_NODELABEL(gpio_usb_c0_int_odl))) { - port = 0; - ud = &poll_c0_int_data; - } else { - port = 1; - ud = &poll_c1_int_data; - } - /* - * We've just been called from a falling edge, so there's definitely - * no lost IRQ right now. Cancel any pending check. - */ - hook_call_deferred(ud, -1); - /* Trigger polling of TCPC and BC1.2 in respective tasks */ - usbc_interrupt_trigger(port); - /* Check for lost interrupts in a bit */ - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); -} diff --git a/zephyr/projects/nissa/npcx_program.conf b/zephyr/projects/nissa/npcx_program.conf deleted file mode 100644 index ae672cb63a..0000000000 --- a/zephyr/projects/nissa/npcx_program.conf +++ /dev/null @@ -1,55 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -# EC chip configuration: NPCX993 -CONFIG_CROS_FLASH_NPCX=y -CONFIG_CROS_SYSTEM_NPCX=y -CONFIG_SOC_SERIES_NPCX9=y -CONFIG_PLATFORM_EC_WORKAROUND_FLASH_DOWNLOAD_API=y -CONFIG_SYSCON=y -CONFIG_TACH_NPCX=y -CONFIG_SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE=256 - -# Common sensor drivers -CONFIG_PLATFORM_EC_ACCEL_LIS2DW12=y - -# Keyboard -CONFIG_CROS_KB_RAW_NPCX=y -CONFIG_PLATFORM_EC_KBLIGHT_ENABLE_PIN=y -# Ensure recovery key combination (esc+refresh+power) is reliable -CONFIG_PLATFORM_EC_KEYBOARD_PWRBTN_ASSERTS_KSI3=y -CONFIG_PLATFORM_EC_KEYBOARD_REFRESH_ROW3=y - -# TCPC+PPC: both C0 and C1 (if present) are RAA489000 -CONFIG_PLATFORM_EC_USB_PD_TCPM_RAA489000=y -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_TCPC=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y -CONFIG_PLATFORM_EC_USB_PD_TCPC_LPM_EXIT_DEBOUNCE_US=100000 -# RAA489000 uses TCPCI but not a separate PPC, so custom function is required -CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y -# type C port 1 redriver -CONFIG_PLATFORM_EC_USBC_RETIMER_ANX7483=y - -# Save some flash space, but retain some useful features -CONFIG_SHELL_MINIMAL=y -CONFIG_SHELL_HISTORY=y -CONFIG_SHELL_TAB=y -CONFIG_SHELL_TAB_AUTOCOMPLETION=y -CONFIG_SHELL_HELP=y -CONFIG_KERNEL_SHELL=y - -# FRS enable -CONFIG_PLATFORM_EC_USB_PD_FRS=y -CONFIG_PLATFORM_EC_USB_PD_FRS_TCPC=y - -# Charger driver and configuration -CONFIG_PLATFORM_EC_CHARGER_RAA489000=y -CONFIG_PLATFORM_EC_OCPC_DEF_RBATT_MOHMS=22 - -# VSENSE: PP3300_S5 & PP1050_PROC -CONFIG_ADC_CMP_NPCX=y -CONFIG_ADC_CMP_NPCX_WORKQUEUE=y -CONFIG_ADC_CMP_NPCX_WORKQUEUE_PRIORITY=12 -CONFIG_SENSOR=y -CONFIG_SENSOR_SHELL=n diff --git a/zephyr/projects/nissa/program.conf b/zephyr/projects/nissa/program.conf deleted file mode 100644 index c23a7f1381..0000000000 --- a/zephyr/projects/nissa/program.conf +++ /dev/null @@ -1,156 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -# Core EC configuration: build the EC application, using ECOS shims -# (which are currently required for a number of features). -CONFIG_CROS_EC=y -CONFIG_PLATFORM_EC=y -CONFIG_SHIMMED_TASKS=y -CONFIG_LTO=y - -# Debug options and features; can be disabled to save memory or once bringup -# is complete. -CONFIG_LOG=y -CONFIG_LOG_MODE_MINIMAL=y - -# RAM-saving options -# flash shell command is unused, allocated a 4kB buffer for flash test -CONFIG_FLASH_SHELL=n -# EC default 1kB buffer seems unnecessarily large, Zephyr default is 8 bytes -CONFIG_SHELL_BACKEND_SERIAL_TX_RING_BUFFER_SIZE=128 - -# Standard shimmed features -CONFIG_PLATFORM_EC_BACKLIGHT_LID=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_SYSINFO=y -CONFIG_PLATFORM_EC_EEPROM_CBI_WP=y -CONFIG_PLATFORM_EC_LID_SWITCH=y -CONFIG_PLATFORM_EC_POWER_BUTTON=y -CONFIG_PLATFORM_EC_SWITCH=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y -CONFIG_PLATFORM_EC_VBOOT_EFS2=y -CONFIG_PLATFORM_EC_VBOOT_HASH=y - -# Application processor; communicates with EC via eSPI -CONFIG_AP=y -CONFIG_AP_X86_INTEL_ADL=y -CONFIG_ESPI=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S4=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S5=y -CONFIG_PLATFORM_EC_HOSTCMD=y -CONFIG_HCDEBUG_OFF=y -CONFIG_PLATFORM_EC_THROTTLE_AP=y -CONFIG_PLATFORM_EC_PORT80=y -CONFIG_PLATFORM_EC_PORT80_QUIET=y - -# AP Power Sequencing -CONFIG_AP_PWRSEQ=y -CONFIG_X86_NON_DSX_PWRSEQ_ADL=y -CONFIG_X86_NON_DSX_PWRSEQ_CONSOLE=y -CONFIG_X86_NON_DSX_PWRSEQ_HOST_CMD=y -CONFIG_AP_PWRSEQ_S0IX=y -CONFIG_AP_PWRSEQ_S0IX_ERROR_RECOVERY=y - -# I2C -CONFIG_I2C=y - -# Keyboard support -CONFIG_PLATFORM_EC_KBLIGHT_ENABLE_PIN=y -CONFIG_PLATFORM_EC_KEYBOARD=y -CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_8042=y -CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y -CONFIG_PLATFORM_EC_CMD_BUTTON=n -# Column 2 is driven through the GSC, which inverts the signal going through it -CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y - -# LED -CONFIG_PLATFORM_EC_LED_COMMON=y -CONFIG_PLATFORM_EC_LED_PWM=y -CONFIG_PLATFORM_EC_LED_ONOFF_STATES=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_LEDTEST=n - -# MKBP event -CONFIG_PLATFORM_EC_MKBP_EVENT=y -CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y -CONFIG_PLATFORM_EC_MKBP_USE_GPIO_AND_HOST_EVENT=y - -# Temperature sensor support -CONFIG_PLATFORM_EC_TEMP_SENSOR=y -CONFIG_PLATFORM_EC_THERMISTOR=y -CONFIG_PLATFORM_EC_TEMP_SENSOR_FIRST_READ_DELAY=y - -# CBI EEPROM support -CONFIG_EEPROM=y -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_SHELL=n -CONFIG_PLATFORM_EC_CBI_EEPROM=y -CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=y - - -# PWM support -CONFIG_PWM=y -CONFIG_PWM_SHELL=y - -# TODO(b/188605676): bring these features up -CONFIG_PLATFORM_EC_BACKLIGHT_LID=n - -# Sensors support -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y - -# USB-C: enable PD on up to two ports -CONFIG_PLATFORM_EC_USBC=y -CONFIG_PLATFORM_EC_USBC_PPC=n -CONFIG_PLATFORM_EC_USB_VID=0x18d1 -CONFIG_PLATFORM_EC_USB_PID=0x505a -# USB4 and TBT are unsupported -CONFIG_PLATFORM_EC_USB_PD_USB4=n -CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=n - -CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=y -CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y -# ADL integrated muxes are slow: unblock PD -CONFIG_PLATFORM_EC_USB_MUX_TASK=y -CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y - -# USB-C TCPC and PPC standard options -CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y - -# USB-A host ports -CONFIG_PLATFORM_EC_USBA=y -CONFIG_PLATFORM_EC_USB_PORT_ENABLE_DYNAMIC=y -# Both ports use a smart switch with CTL1..3 fixed high, for SDP2 or CDP only: -# either SLGC55545 or PI5USB2546. -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_CDP_SDP_ONLY=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_DEFAULT_CDP=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_INVERTED=y - -# Battery support -CONFIG_PLATFORM_EC_BATTERY=y -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y -CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y - -# Charger support -CONFIG_PLATFORM_EC_CHARGER=y -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10 -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y - -# Dynamically select PD voltage to maximize charger efficiency -CONFIG_PLATFORM_EC_USB_PD_DPS=y -# Reduce logging so that state transitions do not cause protocol issues -# pd dump [1-3] can be used to increase the debugging level -CONFIG_PLATFORM_EC_USB_PD_INITIAL_DEBUG_LEVEL=0 diff --git a/zephyr/projects/nissa/pujjo/cbi.dtsi b/zephyr/projects/nissa/pujjo/cbi.dtsi deleted file mode 100644 index b5ba92bd9e..0000000000 --- a/zephyr/projects/nissa/pujjo/cbi.dtsi +++ /dev/null @@ -1,190 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - /* Pujjo-specific fw_config fields. */ - nissa-fw-config { - /* - * FW_CONFIG field to enable KB back light or not. - */ - kb-bl { - enum-name = "FW_KB_BL"; - start = <3>; - size = <1>; - - no-kb-bl { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_BL_NOT_PRESENT"; - value = <0>; - }; - kb-bl-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_BL_PRESENT"; - value = <1>; - }; - }; - - /* - * FW_CONFIG field for KB PWB present or not. - */ - kb-pwb { - enum-name = "FW_KB_PWB"; - start = <4>; - size = <1>; - - no-kb-pwb { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_PWB_NOT_PRESENT"; - value = <0>; - }; - kb-pwb-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_PWB_PRESENT"; - value = <1>; - }; - }; - - /* - * FW_CONFIG field for tablet present or not. - */ - tablet { - enum-name = "FW_TABLET"; - start = <5>; - size = <1>; - - no-tablet { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_TABLET_NOT_PRESENT"; - value = <0>; - }; - tablet-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_TABLET_PRESENT"; - value = <1>; - }; - }; - - /* - * FW_CONFIG field for LTE board present or not. - * - * start = <6>; - * size = <1>; - */ - - /* - * FW_CONFIG field for SD card present or not. - * - * start = <7>; - * size = <1>; - */ - - /* - * FW_CONFIG field for pen present or not. - */ - pen { - enum-name = "FW_PEN"; - start = <8>; - size = <1>; - - no-pen { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_PEN_NOT_PRESENT"; - value = <0>; - }; - pen-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_PEN_PRESENT"; - value = <1>; - }; - }; - - /* - * FW_CONFIG field for WF camera present or not. - * - * start = <9>; - * size = <1>; - */ - - /* - * FW_CONFIG field for multiple thermal table. - */ - therm-table { - enum-name = "THERM_TABLE"; - start = <10>; - size = <2>; - - therm-table-1 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "THERM_TABLE_1"; - value = <1>; - }; - }; - - /* - * FW_CONFIG field for multiple audio module. - * - * start = <12>; - * size = <3>; - */ - - /* - * FW_CONFIG field for EXT_VR. - * - * start = <15>; - * size = <1>; - */ - - /* - * FW_CONFIG field for multiple wi-fi SAR. - * - * start = <16>; - * size = <2>; - */ - }; - - /* Pujjo-specific ssfc fields. */ - cbi-ssfc { - compatible = "named-cbi-ssfc"; - /* - * SSFC field to identify BASE motion sensor. - */ - base-sensor { - enum-name = "BASE_SENSOR"; - size = <2>; - - base_sensor_0: bmi323 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <0>; - default; - }; - base_sensor_1: lsm6dsm { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <1>; - }; - }; - - /* - * SSFC field to identify LID motion sensor. - */ - lid-sensor { - enum-name = "LID_SENSOR"; - size = <2>; - - lid_sensor_0: bma422 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <0>; - default; - }; - lid_sensor_1: lis2dw12 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - value = <1>; - }; - }; - }; -}; diff --git a/zephyr/projects/nissa/pujjo/generated.dtsi b/zephyr/projects/nissa/pujjo/generated.dtsi deleted file mode 100644 index 727d2d3d53..0000000000 --- a/zephyr/projects/nissa/pujjo/generated.dtsi +++ /dev/null @@ -1,277 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * This file is auto-generated - do not edit! - */ - -/ { - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ec_vsense_pp1050_proc: ec_vsense_pp1050_proc { - enum-name = "ADC_PP1050_PROC"; - io-channels = <&adc0 4>; - }; - adc_ec_vsense_pp3300_s5: ec_vsense_pp3300_s5 { - enum-name = "ADC_PP3300_S5"; - io-channels = <&adc0 6>; - }; - adc_temp_sensor_1: temp_sensor_1 { - enum-name = "ADC_TEMP_SENSOR_1"; - io-channels = <&adc0 0>; - }; - adc_temp_sensor_2: temp_sensor_2 { - enum-name = "ADC_TEMP_SENSOR_2"; - io-channels = <&adc0 1>; - }; - adc_temp_sensor_3: temp_sensor_3 { - enum-name = "ADC_TEMP_SENSOR_3"; - io-channels = <&adc0 10>; - }; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_acc_int_l: acc_int_l { - gpios = <&gpio5 0 GPIO_INPUT>; - }; - gpio_all_sys_pwrgd: all_sys_pwrgd { - gpios = <&gpioa 7 GPIO_INPUT>; - }; - gpio_ccd_mode_odl: ccd_mode_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - gpio_cpu_c10_gate_l: cpu_c10_gate_l { - gpios = <&gpio6 7 GPIO_INPUT>; - }; - gpio_ec_battery_pres_odl: ec_battery_pres_odl { - gpios = <&gpioa 3 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - gpio_ec_cbi_wp: ec_cbi_wp { - gpios = <&gpio7 4 GPIO_OUTPUT>; - }; - gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - gpios = <&gpiod 3 GPIO_ODR_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_entering_rw: ec_entering_rw { - gpios = <&gpio0 3 GPIO_OUTPUT>; - enum-name = "GPIO_ENTERING_RW"; - }; - gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - gpios = <&gpio7 5 GPIO_OUTPUT>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_kso_02_inv: ec_kso_02_inv { - gpios = <&gpio1 7 (GPIO_OUTPUT_LOW | GPIO_ACTIVE_LOW)>; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_odl { - gpios = <&gpiob 0 GPIO_ODR_LOW>; - }; - gpio_ec_prochot_odl: ec_prochot_odl { - gpios = <&gpiof 1 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - gpios = <&gpio6 1 GPIO_OUTPUT>; - }; - gpio_ec_soc_hdmi_hpd: ec_soc_hdmi_hpd { - gpios = <&gpioe 4 GPIO_OUTPUT>; - }; - gpio_ec_soc_int_odl: ec_soc_int_odl { - gpios = <&gpio8 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - gpios = <&gpio7 2 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - gpios = <&gpioc 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - gpios = <&gpioa 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_rtcrst: ec_soc_rtcrst { - gpios = <&gpio7 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - gpios = <&gpio3 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - gpios = <&gpioa 4 GPIO_ODR_HIGH>; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpioa 1 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_en_kb_bl: en_kb_bl { - gpios = <&gpioa 0 GPIO_OUTPUT>; - enum-name = "GPIO_EN_KEYBOARD_BACKLIGHT"; - }; - gpio_en_pp3300_s5: en_pp3300_s5 { - gpios = <&gpiob 6 GPIO_OUTPUT>; - enum-name = "GPIO_TEMP_SENSOR_POWER"; - }; - gpio_en_pp5000_pen_x: en_pp5000_pen_x { - gpios = <&gpioe 2 GPIO_OUTPUT>; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpio4 0 GPIO_OUTPUT>; - }; - gpio_en_slp_z: en_slp_z { - gpios = <&gpioe 1 GPIO_OUTPUT>; - }; - gpio_en_usb_a0_vbus: en_usb_a0_vbus { - gpios = <&gpio9 1 GPIO_OUTPUT>; - }; - gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpio0 0 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_hdmi_sel: hdmi_sel { - gpios = <&gpioc 6 GPIO_OUTPUT>; - }; - gpio_imu_int_l: imu_int_l { - gpios = <&gpio5 6 GPIO_INPUT>; - }; - gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - gpios = <&gpio4 3 GPIO_INPUT>; - }; - gpio_lid_open: lid_open { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_pen_detect_odl: pen_detect_odl { - gpios = <&gpio9 6 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - gpios = <&gpiof 0 GPIO_INPUT>; - }; - gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - gpios = <&gpio4 2 GPIO_INPUT>; - }; - gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - gpios = <&gpio9 4 GPIO_INPUT_PULL_UP>; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpio9 7 GPIO_INPUT>; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioa 5 GPIO_INPUT>; - }; - gpio_slp_s4_l: slp_s4_l { - gpios = <&gpio7 0 GPIO_INPUT>; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpio6 2 GPIO_INPUT>; - }; - gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - gpios = <&gpiod 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB2_ILIM_SEL"; - }; - gpio_sys_rst_odl: sys_rst_odl { - gpios = <&gpioc 5 GPIO_ODR_HIGH>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpio9 5 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - gpios = <&gpio8 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB1_ILIM_SEL"; - }; - gpio_usb_c0_int_odl: usb_c0_int_odl { - gpios = <&gpio0 1 GPIO_INPUT_PULL_UP>; - }; - gpio_vccin_aux_vid0: vccin_aux_vid0 { - gpios = <&gpio9 2 GPIO_INPUT>; - }; - gpio_vccin_aux_vid1: vccin_aux_vid1 { - gpios = <&gpioe 3 GPIO_INPUT>; - }; - gpio_voldn_btn_odl: voldn_btn_odl { - gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_volup_btn_odl: volup_btn_odl { - gpios = <&gpioa 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - }; - - named-i2c-ports { - compatible = "named-i2c-ports"; - - i2c_ec_i2c_eeprom: ec_i2c_eeprom { - i2c-port = <&i2c0_0>; - enum-names = "I2C_PORT_EEPROM"; - }; - i2c_ec_i2c_sensor: ec_i2c_sensor { - i2c-port = <&i2c1_0>; - enum-names = "I2C_PORT_SENSOR"; - }; - i2c_ec_i2c_usb_c0: ec_i2c_usb_c0 { - i2c-port = <&i2c3_0>; - enum-names = "I2C_PORT_USB_C0_TCPC"; - }; - i2c_ec_i2c_batt: ec_i2c_batt { - i2c-port = <&i2c7_0>; - enum-names = "I2C_PORT_BATTERY"; - }; - }; -}; - -&adc0 { - status = "okay"; - pinctrl-0 = <&adc0_chan0_gp45 - &adc0_chan1_gp44 - &adc0_chan4_gp41 - &adc0_chan6_gp34 - &adc0_chan10_gpe0>; - pinctrl-names = "default"; -}; - - -&i2c0_0 { - status = "okay"; - pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; - pinctrl-names = "default"; -}; - -&i2c1_0 { - status = "okay"; - pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; - pinctrl-names = "default"; -}; - -&i2c3_0 { - status = "okay"; - pinctrl-0 = <&i2c3_0_sda_scl_gpd0_d1>; - pinctrl-names = "default"; -}; - -&i2c7_0 { - status = "okay"; - pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; - pinctrl-names = "default"; -}; - -&i2c_ctrl0 { - status = "okay"; -}; - -&i2c_ctrl1 { - status = "okay"; -}; - -&i2c_ctrl3 { - status = "okay"; -}; - -&i2c_ctrl7 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/pujjo/keyboard.dtsi b/zephyr/projects/nissa/pujjo/keyboard.dtsi deleted file mode 100644 index 00610e4e18..0000000000 --- a/zephyr/projects/nissa/pujjo/keyboard.dtsi +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - kblight { - compatible = "cros-ec,kblight-pwm"; - pwms = <&pwm6 6 PWM_HZ(2400) PWM_POLARITY_NORMAL>; - }; -}; - -&pwm6 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm6_gpc0>; - pinctrl-names = "default"; -}; - -&cros_kb_raw { - status = "okay"; - /* No KSO2 (it's inverted and implemented by GPIO) */ - pinctrl-0 = < - &ksi0_gp31 - &ksi1_gp30 - &ksi2_gp27 - &ksi3_gp26 - &ksi4_gp25 - &ksi5_gp24 - &ksi6_gp23 - &ksi7_gp22 - &kso00_gp21 - &kso01_gp20 - &kso03_gp16 - &kso04_gp15 - &kso05_gp14 - &kso06_gp13 - &kso07_gp12 - &kso08_gp11 - &kso09_gp10 - &kso10_gp07 - &kso11_gp06 - &kso12_gp05 - &kso13_gp04 - &kso14_gp82 - >; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/pujjo/motionsense.dtsi b/zephyr/projects/nissa/pujjo/motionsense.dtsi deleted file mode 100644 index 2dfca337c4..0000000000 --- a/zephyr/projects/nissa/pujjo/motionsense.dtsi +++ /dev/null @@ -1,245 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * Interrupt bindings for sensor devices. - */ - bmi3xx-int = &base_accel; - lsm6dsm-int = &base_accel; - lis2dw12-int = &lid_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - lid_mutex: lid-mutex { - }; - - base_mutex: base-mutex { - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <0 (-1) 0 - (-1) 0 0 - 0 0 (-1)>; - }; - - lid_rot_lis2dw12: lid-rotation-lis2dw12 { - mat33 = <0 (-1) 0 - (-1) 0 0 - 0 0 (-1)>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <0 1 0 - (-1) 0 0 - 0 0 1>; - }; - - base_rot_lsm6dsm: base-rotation-lsm6dsm { - mat33 = <1 0 0 - 0 1 0 - 0 0 1>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - bmi323_data: bmi323-drv-data { - compatible = "cros-ec,drvdata-bmi3xx"; - status = "okay"; - }; - - lsm6dsm_data_accel: lsm6dsm-accel-drv-data { - compatible = "cros-ec,drvdata-lsm6dsm"; - status = "okay"; - }; - - lsm6dsm_data_gyro: lsm6dsm-gyro-drv-data { - compatible = "cros-ec,drvdata-lsm6dsm"; - status = "okay"; - }; - - bma422_data: bma422-drv-data { - compatible = "cros-ec,drvdata-bma4xx"; - status = "okay"; - }; - - lis2dw12_data: lis2dw12-drv-data { - compatible = "cros-ec,drvdata-lis2dw12"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The nodelabel "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - * TODO(b/238139272): The first entries of the array must be - * accelerometers,then gyroscope. Fix this dependency in the DTS - * processing which makes the devicetree entries independent. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,bma4xx"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&bma422_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,bmi3xx-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi323_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_gyro: base-gyro { - compatible = "cros-ec,bmi3xx-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi323_data>; - }; - }; - - motionsense-sensor-alt { - alt_lid_accel: alt-lid-accel { - compatible = "cros-ec,lis2dw12"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_lis2dw12>; - default-range = <2>; - drv-data = <&lis2dw12_data>; - i2c-spi-addr-flags = "LIS2DWL_ADDR1_FLAGS"; - alternate-for = <&lid_accel>; - alternate-ssfc-indicator = <&lid_sensor_1>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - alt_base_accel: alt-base-accel { - compatible = "cros-ec,lsm6dsm-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_lsm6dsm>; - drv-data = <&lsm6dsm_data_accel>; - alternate-for = <&base_accel>; - alternate-ssfc-indicator = <&base_sensor_1>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - ec-rate = <(100 * USEC_PER_MSEC)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - ec-rate = <0>; - }; - }; - }; - - alt_base_gyro: alt-base-gyro { - compatible = "cros-ec,lsm6dsm-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_lsm6dsm>; - drv-data = <&lsm6dsm_data_gyro>; - alternate-for = <&base_gyro>; - alternate-ssfc-indicator = <&base_sensor_1>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&int_imu>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel>; - }; -}; diff --git a/zephyr/projects/nissa/pujjo/overlay.dtsi b/zephyr/projects/nissa/pujjo/overlay.dtsi deleted file mode 100644 index 60b3b60003..0000000000 --- a/zephyr/projects/nissa/pujjo/overlay.dtsi +++ /dev/null @@ -1,350 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - aliases { - gpio-cbi-wp = &gpio_ec_cbi_wp; - gpio-wp = &gpio_ec_wp_odl; - int-wp = &int_wp_l; - gpio-kbd-kso2 = &gpio_ec_kso_02_inv; - }; - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; - - batteries { - default_battery: smp { - compatible = "smp,l22m3pg0", "battery-smart"; - }; - smp_l22m3pg1 { - compatible = "smp,l22m3pg1", "battery-smart"; - }; - sunwoda_l22d3pg0 { - compatible = "sunwoda,l22d3pg0", "battery-smart"; - }; - sunwoda_l22d3pg1 { - compatible = "sunwoda,l22d3pg1", "battery-smart"; - }; - celxpert_l22c3pg0 { - compatible = "celxpert,l22c3pg0", "battery-smart"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-irqs = < - &int_power_button - &int_lid_open - >; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_power_button: power_button { - irq-pin = <&gpio_gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_wp_l: wp_l { - irq-pin = <&gpio_ec_wp_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_lid_open: lid_open { - irq-pin = <&gpio_lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_tablet_mode: tablet_mode { - irq-pin = <&gpio_tablet_mode_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "gmr_tablet_switch_isr"; - }; - int_imu: ec_imu { - irq-pin = <&gpio_imu_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "motion_interrupt"; - }; - int_vol_down: vol_down { - irq-pin = <&gpio_voldn_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_vol_up: vol_up { - irq-pin = <&gpio_volup_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_usb_c0: usb_c0 { - irq-pin = <&gpio_usb_c0_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_interrupt"; - }; - }; - - named-gpios { - gpio_sb_2: sb_2 { - gpios = <&gpiod 4 GPIO_OUTPUT>; - no-auto-init; - }; - - gpio_sb_3: sb_3 { - gpios = <&gpiof 5 GPIO_OPEN_DRAIN>; - no-auto-init; - }; - gpio_sb_4: sb_4 { - gpios = <&gpiof 4 GPIO_INPUT>; - no-auto-init; - }; - gpio_fan_enable: fan-enable { - gpios = <&gpio6 3 GPIO_OUTPUT>; - no-auto-init; - }; - gpio_power_led: power_led { - gpios = <&gpioc 2 GPIO_OUTPUT_LOW>; - }; - gpio_led_1_odl: led_1_odl { - gpios = <&gpioc 4 GPIO_OUTPUT_LOW>; - }; - gpio_led_2_odl: led_2_odl { - gpios = <&gpioc 3 GPIO_OUTPUT_LOW>; - }; - }; - - /* - * Aliases used for sub-board GPIOs. - */ - aliases { - /* - * Sub-board with type A USB, enable. - */ - gpio-en-usb-a1-vbus = &gpio_sb_2; - /* - * HPD pins for HDMI sub-board. - */ - gpio-hdmi-en-odl = &gpio_sb_3; - gpio-hpd-odl = &gpio_sb_4; - /* - * Enable S5 rails for LTE sub-board - */ - gpio-en-sub-s5-rails = &gpio_sb_2; - }; - - temp_cpu: cpu { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_1>; - }; - temp_ddr: ddr { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_2>; - }; - temp_ambient: ambient { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_3>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - cpu { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <90>; - temp_host_halt = <100>; - temp_host_release_high = <85>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_cpu>; - }; - ddr { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <90>; - temp_host_halt = <100>; - temp_host_release_high = <85>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_ddr>; - }; - ambient { - temp_fan_off = <35>; - temp_fan_max = <60>; - temp_host_high = <90>; - temp_host_halt = <100>; - temp_host_release_high = <85>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_ambient>; - }; - }; - - usba { - compatible = "cros-ec,usba-port-enable-pins"; - /* - * sb_2 is only configured as GPIO when USB-A1 is present, - * but it's still safe to control when disabled. - * - * ILIM_SEL pins are referred to by legacy enum name, - * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on - * sub-boards that don't have USB-A so is safe to control - * regardless of system configuration. - */ - enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>; - status = "okay"; - }; - - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - chg = <&chg_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_0>; - }; - }; - port0-muxes { - virtual_mux_0: virtual-mux-0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - }; - - fans { - compatible = "cros-ec,fans"; - - fan_0 { - pwms = <&pwm5 5 PWM_KHZ(1) PWM_POLARITY_NORMAL>; - rpm_min = <2200>; - rpm_start = <2200>; - rpm_max = <4200>; - tach = <&tach2>; - enable_gpio = <&gpio_fan_enable>; - }; - }; - - /* - * Declare unused GPIOs so that they are shut down - * and use minimal power - */ - unused-pins { - compatible = "unused-gpios"; - unused-gpios = - <&gpio3 3 0>, - <&gpio3 6 0>, - <&gpiod 7 0>, - <&gpiof 2 0>, - <&gpiof 3 0>; - }; -}; - -&thermistor_3V3_51K1_47K_4050B { - status = "okay"; -}; - -&adc_ec_vsense_pp3300_s5 { - /* - * Voltage divider on input has 47k upper and 220k lower legs with - * 2714 mV full-scale reading on the ADC. Apply the largest possible - * multiplier (without overflowing int32) to get the best possible - * approximation of the actual ratio, but derate by a factor of two to - * ensure unexpectedly high values won't overflow. - */ - mul = <(791261 / 2)>; - div = <(651975 / 2)>; -}; - -/* Set bus speeds for I2C */ -&i2c0_0 { - label = "I2C_EEPROM"; - clock-frequency = <I2C_BITRATE_FAST>; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; -}; - -&i2c1_0 { - label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; -}; - -&i2c3_0 { - label = "I2C_USB_C0_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - /* - * BC1.2 interrupt is shared with TCPC, so - * IRQ is not specified here and handled by - * usb_c0_interrupt. - */ - }; - - chg_port0: isl923x@9 { - compatible = "intersil,isl923x"; - status = "okay"; - reg = <0x9>; - }; -}; - -&i2c7_0 { - label = "I2C_BATTERY"; - clock-frequency = <I2C_BITRATE_STANDARD>; -}; - -&pwm5_gpb7 { - drive-open-drain; -}; - -&pwm5 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm5_gpb7>; - pinctrl-names = "default"; -}; - -/* Tachometer for fan speed measurement */ -&tach2 { - status = "okay"; - pinctrl-0 = <&ta2_1_in_gp73>; - pinctrl-names = "default"; - port = <NPCX_TACH_PORT_A>; /* port-A is selected */ - sample-clk = <NPCX_TACH_FREQ_LFCLK>; /* Use LFCLK as sampling clock */ - pulses-per-round = <2>; /* number of pulses per round of encoder */ -}; - -/* host interface */ -&espi0 { - status = "okay"; - pinctrl-0 = <&espi_lpc_gp46_47_51_52_53_54_55_57>; - pinctrl-names = "default"; -}; - -/* - * Declare GPIOs that have leakage current caused by board issues here. NPCX ec - * will disable their input buffers before entering deep sleep and restore them - * after waking up automatically for better power consumption. - */ -&power_leakage_io { - leak-gpios = <&gpioa 4 0 - &gpiof 1 0>; -}; diff --git a/zephyr/projects/nissa/pujjo/power_signals.dtsi b/zephyr/projects/nissa/pujjo/power_signals.dtsi deleted file mode 100644 index 1d2b23069d..0000000000 --- a/zephyr/projects/nissa/pujjo/power_signals.dtsi +++ /dev/null @@ -1,220 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - chosen { - intel-ap-pwrseq,espi = &espi0; - }; - - common-pwrseq { - compatible = "intel,ap-pwrseq"; - - sys-pwrok-delay = <10>; - all-sys-pwrgd-timeout = <20>; - }; - - pwr-en-pp5000-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP5000_S5 enable output to regulator"; - enum-name = "PWR_EN_PP5000_A"; - gpios = <&gpio4 0 0>; - output; - }; - pwr-en-pp3300-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP3300_S5 enable output to LS"; - enum-name = "PWR_EN_PP3300_A"; - gpios = <&gpiob 6 0>; - output; - }; - pwr-pg-ec-rsmrst-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST power good from regulator"; - enum-name = "PWR_RSMRST"; - gpios = <&gpio9 4 0>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-pch-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST output to PCH"; - enum-name = "PWR_EC_PCH_RSMRST"; - gpios = <&gpioa 6 0>; - output; - }; - pwr-slp-s0-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S0_L input from PCH"; - enum-name = "PWR_SLP_S0"; - gpios = <&gpio9 7 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-s3-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S3_L input from PCH"; - enum-name = "PWR_SLP_S3"; - gpios = <&gpioa 5 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-sus-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_SUS_L input from PCH"; - enum-name = "PWR_SLP_SUS"; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-soc-dsw-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "DSW_PWROK output to PCH"; - enum-name = "PWR_EC_SOC_DSW_PWROK"; - gpios = <&gpio6 1 0>; - output; - }; - pwr-vccst-pwrgd-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VCCST_PWRGD output to PCH"; - enum-name = "PWR_VCCST_PWRGD"; - gpios = <&gpioa 4 GPIO_OPEN_DRAIN>; - output; - }; - pwr-imvp9-vrrdy-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VRRDY input from IMVP9"; - enum-name = "PWR_IMVP9_VRRDY"; - gpios = <&gpio4 3 0>; - }; - pwr-pch-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PCH_PWROK output to PCH"; - enum-name = "PWR_PCH_PWROK"; - gpios = <&gpio7 2 GPIO_OPEN_DRAIN>; - output; - }; - pwr-ec-pch-sys-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_PWROK output to PCH"; - enum-name = "PWR_EC_PCH_SYS_PWROK"; - gpios = <&gpio3 7 0>; - output; - }; - pwr-sys-rst-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_RESET# output to PCH"; - enum-name = "PWR_SYS_RST"; - gpios = <&gpioc 5 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; - output; - }; - pwr-slp-s4 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S4 virtual wire input from PCH"; - enum-name = "PWR_SLP_S4"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; - vw-invert; - }; - pwr-slp-s5 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S5 virtual wire input from PCH"; - enum-name = "PWR_SLP_S5"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; - vw-invert; - }; - pwr-all-sys-pwrgd { - compatible = "intel,ap-pwrseq-external"; - dbg-label = "Combined all power good"; - enum-name = "PWR_ALL_SYS_PWRGD"; - }; - pwr-adc-pp3300 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP3300 PWROK (from ADC)"; - enum-name = "PWR_DSW_PWROK"; - trigger-high = <&cmp_pp3300_s5_high>; - trigger-low = <&cmp_pp3300_s5_low>; - }; - pwr-adc-pp1p05 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP1P05 PWROK (from ADC)"; - enum-name = "PWR_PG_PP1P05"; - trigger-high = <&cmp_pp1p05_high>; - trigger-low = <&cmp_pp1p05_low>; - }; - - adc-cmp { - cmp_pp3300_s5_high: pp3300_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* - * This is 90% of nominal voltage considering voltage - * divider on ADC input. - */ - threshold-mv = <2448>; - }; - cmp_pp3300_s5_low: pp3300_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <2448>; - }; - cmp_pp1p05_high: pp1p05_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* Setting at 90% of nominal voltage */ - threshold-mv = <945>; - }; - cmp_pp1p05_low: pp1p05_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <945>; - }; - }; -}; - -/* - * Because the power signals directly reference the GPIOs, - * the correspinding named-gpios need to have no-auto-init set. - */ -&gpio_ec_soc_dsw_pwrok { - no-auto-init; -}; -&gpio_ec_soc_pch_pwrok_od { - no-auto-init; -}; -&gpio_ec_soc_rsmrst_l { - no-auto-init; -}; -&gpio_ec_soc_sys_pwrok { - no-auto-init; -}; -&gpio_ec_soc_vccst_pwrgd_od { - no-auto-init; -}; -&gpio_en_pp3300_s5 { - no-auto-init; -}; -&gpio_en_pp5000_s5 { - no-auto-init; -}; -&gpio_imvp91_vrrdy_od { - no-auto-init; -}; -&gpio_rsmrst_pwrgd_l { - no-auto-init; -}; -&gpio_slp_s0_l { - no-auto-init; -}; -&gpio_slp_s3_l { - no-auto-init; -}; -&gpio_slp_s4_l { - no-auto-init; -}; -&gpio_slp_sus_l { - no-auto-init; -}; -&gpio_sys_rst_odl { - no-auto-init; -}; diff --git a/zephyr/projects/nissa/pujjo/project.conf b/zephyr/projects/nissa/pujjo/project.conf deleted file mode 100644 index b9dc28b9cd..0000000000 --- a/zephyr/projects/nissa/pujjo/project.conf +++ /dev/null @@ -1,33 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_BOARD_PUJJO=y - -# Sensor drivers -CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSM=y -CONFIG_PLATFORM_EC_ACCEL_BMA4XX=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI3XX=y -CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y - -# Increase PD max power from default -CONFIG_PLATFORM_EC_PD_MAX_POWER_MW=65000 -CONFIG_PLATFORM_EC_PD_MAX_CURRENT_MA=3250 - -# LED -CONFIG_PLATFORM_EC_LED_PWM=n -CONFIG_PLATFORM_EC_LED_COMMON=y - -# CBI -CONFIG_PLATFORM_EC_BYPASS_CBI_EEPROM_WP_CHECK=y -CONFIG_PLATFORM_EC_SYSTEM_UNLOCKED=y - -# DPS -CONFIG_PLATFORM_EC_USB_PD_DPS=n - -# BTN -CONFIG_PLATFORM_EC_BUTTONS_RUNTIME_CONFIG=y - -# Charger -CONFIG_PLATFORM_EC_RAA489000_TRICKLE_CHARGE_CURRENT_256MA=y
\ No newline at end of file diff --git a/zephyr/projects/nissa/pujjo/project.overlay b/zephyr/projects/nissa/pujjo/project.overlay deleted file mode 100644 index e498775714..0000000000 --- a/zephyr/projects/nissa/pujjo/project.overlay +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "../cbi.dtsi" - -#include "cbi.dtsi" -#include "generated.dtsi" -#include "keyboard.dtsi" -#include "motionsense.dtsi" -#include "overlay.dtsi" -#include "power_signals.dtsi" diff --git a/zephyr/projects/nissa/pujjo/pujjo_vif.xml b/zephyr/projects/nissa/pujjo/pujjo_vif.xml deleted file mode 100644 index b7d462584a..0000000000 --- a/zephyr/projects/nissa/pujjo/pujjo_vif.xml +++ /dev/null @@ -1,350 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?>
-<vif:VIF xmlns:opt="http://usb.org/VendorInfoFileOptionalContent.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:vif="http://usb.org/VendorInfoFile.xsd">
- <vif:VIF_Specification>3.19</vif:VIF_Specification>
- <vif:VIF_App>
- <vif:Vendor>USB-IF</vif:Vendor>
- <vif:Name>VIF Editor</vif:Name>
- <vif:Version>3.2.4.0</vif:Version>
- </vif:VIF_App>
- <vif:Vendor_Name>Google</vif:Vendor_Name>
- <vif:Model_Part_Number>Pujjo</vif:Model_Part_Number>
- <vif:Product_Revision>1</vif:Product_Revision>
- <vif:TID>0</vif:TID>
- <vif:VIF_Product_Type value="0">Port Product</vif:VIF_Product_Type>
- <vif:Certification_Type value="0">End Product</vif:Certification_Type>
- <vif:Product>
- <!--Product Level Content:-->
- </vif:Product>
- <vif:Component>
- <!--Component 0: Port 0-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Component-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Port_Label>0</vif:Port_Label>
- <vif:Connector_Type value="2">Type-C®</vif:Connector_Type>
- <vif:USB4_Supported value="false" />
- <vif:USB_PD_Support value="true" />
- <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type>
- <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine>
- <vif:Port_Battery_Powered value="true" />
- <vif:BC_1_2_Support value="2">Charging Port</vif:BC_1_2_Support>
- <vif:Captive_Cable value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;General PD-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Spec_Revision_Major value="3" />
- <vif:PD_Spec_Revision_Minor value="1" />
- <vif:PD_Spec_Version_Major value="1" />
- <vif:PD_Spec_Version_Minor value="3" />
- <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision>
- <vif:SOP_Capable value="true" />
- <vif:SOP_P_Capable value="true" />
- <vif:SOP_PP_Capable value="true" />
- <vif:SOP_P_Debug_Capable value="false" />
- <vif:SOP_PP_Debug_Capable value="false" />
- <vif:Manufacturer_Info_Supported_Port value="true" />
- <vif:Manufacturer_Info_VID_Port value="6353">18D1</vif:Manufacturer_Info_VID_Port>
- <vif:Manufacturer_Info_PID_Port value="20570">505A</vif:Manufacturer_Info_PID_Port>
- <vif:Chunking_Implemented_SOP value="true" />
- <vif:Unchunked_Extended_Messages_Supported value="false" />
- <vif:Security_Msgs_Supported_SOP value="false" />
- <vif:Unconstrained_Power value="false" />
- <vif:Num_Fixed_Batteries value="1" />
- <vif:Num_Swappable_Battery_Slots value="0" />
- <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Capabilities-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:USB_Comms_Capable value="true" />
- <vif:DR_Swap_To_DFP_Supported value="true" />
- <vif:DR_Swap_To_UFP_Supported value="false" />
- <vif:VCONN_Swap_To_On_Supported value="true" />
- <vif:VCONN_Swap_To_Off_Supported value="true" />
- <vif:Responds_To_Discov_SOP_UFP value="false" />
- <vif:Responds_To_Discov_SOP_DFP value="true" />
- <vif:Attempts_Discov_SOP value="true" />
- <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available>
- <vif:Data_Reset_Supported value="false" />
- <vif:Enter_USB_Supported value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Type-C®-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Type_C_Can_Act_As_Host value="true" />
- <vif:Type_C_Can_Act_As_Device value="false" />
- <vif:Type_C_Implements_Try_SRC value="true" />
- <vif:Type_C_Implements_Try_SNK value="false" />
- <vif:Type_C_Supports_Audio_Accessory value="false" />
- <vif:Type_C_Is_VCONN_Powered_Accessory value="false" />
- <vif:Type_C_Is_Debug_Target_SRC value="true" />
- <vif:Type_C_Is_Debug_Target_SNK value="true" />
- <vif:RP_Value value="1">1.5A</vif:RP_Value>
- <vif:Type_C_Port_On_Hub value="false" />
- <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source>
- <vif:Type_C_Sources_VCONN value="true" />
- <vif:Type_C_Is_Alt_Mode_Controller value="true" />
- <vif:Type_C_Is_Alt_Mode_Adapter value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Product Power-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW>
- <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Host-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Host_Supports_USB_Data value="true" />
- <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed>
- <vif:Host_Contains_Captive_Retimer value="false" />
- <vif:Host_Truncates_DP_For_tDHPResponse value="false" />
- <vif:Host_Is_Embedded value="false" />
- <vif:Host_Suspend_Supported value="true" />
- <vif:Is_DFP_On_Hub value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Battery Charging 1.2-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Source-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source>
- <vif:EPR_Supported_As_Src value="false" />
- <vif:USB_Suspend_May_Be_Cleared value="false" />
- <vif:Sends_Pings value="false" />
- <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink>
- <vif:Master_Port value="false" />
- <vif:Num_Src_PDOs value="1" />
- <vif:PD_OC_Protection value="true" />
- <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method>
- <!--Bundle: SrcPdoList-->
- <vif:SrcPdoList>
- <vif:SrcPDO>
- <!--Source PDO 1-->
- <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type>
- <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current>
- <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage>
- <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current>
- <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce>
- <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold>
- </vif:SrcPDO>
- </vif:SrcPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Sink-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Sink value="60000">60000 mW</vif:PD_Power_As_Sink>
- <vif:EPR_Supported_As_Snk value="false" />
- <vif:No_USB_Suspend_May_Be_Set value="true" />
- <vif:GiveBack_May_Be_Set value="false" />
- <vif:Higher_Capability_Set value="false" />
- <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source>
- <vif:Num_Snk_PDOs value="3" />
- <!--Bundle: SnkPdoList-->
- <vif:SnkPdoList>
- <vif:SnkPDO>
- <!--Sink PDO 1-->
- <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 2-->
- <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="400">20000 mV</vif:Snk_PDO_Max_Voltage>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 3-->
- <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="400">20000 mV</vif:Snk_PDO_Max_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- </vif:SnkPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Dual Role-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Accepts_PR_Swap_As_Src value="true" />
- <vif:Accepts_PR_Swap_As_Snk value="true" />
- <vif:Requests_PR_Swap_As_Src value="true" />
- <vif:Requests_PR_Swap_As_Snk value="true" />
- <vif:FR_Swap_Supported_As_Initial_Sink value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;SOP Discover ID-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:XID_SOP value="0" />
- <vif:Data_Capable_As_USB_Host_SOP value="true" />
- <vif:Data_Capable_As_USB_Device_SOP value="false" />
- <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP>
- <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP>
- <vif:DFP_VDO_Port_Number value="0" />
- <vif:Modal_Operation_Supported_SOP value="false" />
- <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP>
- <vif:PID_SOP value="20570">505A</vif:PID_SOP>
- <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP>
- </vif:Component>
- <vif:Component>
- <!--Component 1: Port 1-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Component-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Port_Label>1</vif:Port_Label>
- <vif:Connector_Type value="2">Type-C®</vif:Connector_Type>
- <vif:USB4_Supported value="false" />
- <vif:USB_PD_Support value="true" />
- <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type>
- <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine>
- <vif:Port_Battery_Powered value="true" />
- <vif:BC_1_2_Support value="2">Charging Port</vif:BC_1_2_Support>
- <vif:Captive_Cable value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;General PD-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Spec_Revision_Major value="3" />
- <vif:PD_Spec_Revision_Minor value="1" />
- <vif:PD_Spec_Version_Major value="1" />
- <vif:PD_Spec_Version_Minor value="3" />
- <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision>
- <vif:SOP_Capable value="true" />
- <vif:SOP_P_Capable value="true" />
- <vif:SOP_PP_Capable value="true" />
- <vif:SOP_P_Debug_Capable value="false" />
- <vif:SOP_PP_Debug_Capable value="false" />
- <vif:Manufacturer_Info_Supported_Port value="true" />
- <vif:Manufacturer_Info_VID_Port value="6353">18D1</vif:Manufacturer_Info_VID_Port>
- <vif:Manufacturer_Info_PID_Port value="20570">505A</vif:Manufacturer_Info_PID_Port>
- <vif:Chunking_Implemented_SOP value="true" />
- <vif:Unchunked_Extended_Messages_Supported value="false" />
- <vif:Security_Msgs_Supported_SOP value="false" />
- <vif:Unconstrained_Power value="false" />
- <vif:Num_Fixed_Batteries value="1" />
- <vif:Num_Swappable_Battery_Slots value="0" />
- <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Capabilities-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:USB_Comms_Capable value="true" />
- <vif:DR_Swap_To_DFP_Supported value="true" />
- <vif:DR_Swap_To_UFP_Supported value="false" />
- <vif:VCONN_Swap_To_On_Supported value="true" />
- <vif:VCONN_Swap_To_Off_Supported value="true" />
- <vif:Responds_To_Discov_SOP_UFP value="false" />
- <vif:Responds_To_Discov_SOP_DFP value="true" />
- <vif:Attempts_Discov_SOP value="true" />
- <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available>
- <vif:Data_Reset_Supported value="false" />
- <vif:Enter_USB_Supported value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Type-C®-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Type_C_Can_Act_As_Host value="true" />
- <vif:Type_C_Can_Act_As_Device value="false" />
- <vif:Type_C_Implements_Try_SRC value="true" />
- <vif:Type_C_Implements_Try_SNK value="false" />
- <vif:Type_C_Supports_Audio_Accessory value="false" />
- <vif:Type_C_Is_VCONN_Powered_Accessory value="false" />
- <vif:Type_C_Is_Debug_Target_SRC value="true" />
- <vif:Type_C_Is_Debug_Target_SNK value="true" />
- <vif:RP_Value value="1">1.5A</vif:RP_Value>
- <vif:Type_C_Port_On_Hub value="false" />
- <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source>
- <vif:Type_C_Sources_VCONN value="true" />
- <vif:Type_C_Is_Alt_Mode_Controller value="true" />
- <vif:Type_C_Is_Alt_Mode_Adapter value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Product Power-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW>
- <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Host-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Host_Supports_USB_Data value="true" />
- <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed>
- <vif:Host_Contains_Captive_Retimer value="true" />
- <vif:Host_Truncates_DP_For_tDHPResponse value="false" />
- <vif:Host_Is_Embedded value="false" />
- <vif:Host_Suspend_Supported value="true" />
- <vif:Is_DFP_On_Hub value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Battery Charging 1.2-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Source-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source>
- <vif:EPR_Supported_As_Src value="false" />
- <vif:USB_Suspend_May_Be_Cleared value="false" />
- <vif:Sends_Pings value="false" />
- <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink>
- <vif:Master_Port value="false" />
- <vif:Num_Src_PDOs value="1" />
- <vif:PD_OC_Protection value="true" />
- <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method>
- <!--Bundle: SrcPdoList-->
- <vif:SrcPdoList>
- <vif:SrcPDO>
- <!--Source PDO 1-->
- <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type>
- <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current>
- <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage>
- <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current>
- <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce>
- <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold>
- </vif:SrcPDO>
- </vif:SrcPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Sink-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Sink value="60000">60000 mW</vif:PD_Power_As_Sink>
- <vif:EPR_Supported_As_Snk value="false" />
- <vif:No_USB_Suspend_May_Be_Set value="true" />
- <vif:GiveBack_May_Be_Set value="false" />
- <vif:Higher_Capability_Set value="false" />
- <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source>
- <vif:Num_Snk_PDOs value="3" />
- <!--Bundle: SnkPdoList-->
- <vif:SnkPdoList>
- <vif:SnkPDO>
- <!--Sink PDO 1-->
- <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 2-->
- <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="400">20000 mV</vif:Snk_PDO_Max_Voltage>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 3-->
- <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="400">20000 mV</vif:Snk_PDO_Max_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- </vif:SnkPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Dual Role-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Accepts_PR_Swap_As_Src value="true" />
- <vif:Accepts_PR_Swap_As_Snk value="true" />
- <vif:Requests_PR_Swap_As_Src value="true" />
- <vif:Requests_PR_Swap_As_Snk value="true" />
- <vif:FR_Swap_Supported_As_Initial_Sink value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;SOP Discover ID-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:XID_SOP value="0" />
- <vif:Data_Capable_As_USB_Host_SOP value="true" />
- <vif:Data_Capable_As_USB_Device_SOP value="false" />
- <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP>
- <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP>
- <vif:DFP_VDO_Port_Number value="1" />
- <vif:Modal_Operation_Supported_SOP value="false" />
- <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP>
- <vif:PID_SOP value="20570">505A</vif:PID_SOP>
- <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP>
- </vif:Component>
-</vif:VIF>
\ No newline at end of file diff --git a/zephyr/projects/nissa/pujjo/src/charger.c b/zephyr/projects/nissa/pujjo/src/charger.c deleted file mode 100644 index f1f1d57790..0000000000 --- a/zephyr/projects/nissa/pujjo/src/charger.c +++ /dev/null @@ -1,64 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "battery.h" -#include "charger.h" -#include "charger/isl923x_public.h" -#include "driver/tcpm/raa489000.h" -#include "driver/charger/isl923x.h" -#include "console.h" -#include "extpower.h" -#include "usb_pd.h" -#include "nissa_common.h" -#include "hooks.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = raa489000_is_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -/* - * Pujjo does not have a GPIO indicating whether extpower is present, - * so detect using the charger(s). - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; -} - -__override void board_hibernate(void) -{ - /* Shut down the chargers */ - raa489000_hibernate(0, true); - LOG_INF("Charger(s) hibernated"); - cflush(); -} - -static void charger_prochot_init(void) -{ - isl923x_set_ac_prochot(CHARGER_SOLO, 3500); - isl923x_set_dc_prochot(CHARGER_SOLO, 6528); -} -DECLARE_HOOK(HOOK_INIT, charger_prochot_init, HOOK_PRIO_POST_FIRST); diff --git a/zephyr/projects/nissa/pujjo/src/fan.c b/zephyr/projects/nissa/pujjo/src/fan.c deleted file mode 100644 index 97323a7edf..0000000000 --- a/zephyr/projects/nissa/pujjo/src/fan.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/devicetree.h> -#include <zephyr/drivers/gpio.h> -#include <zephyr/logging/log.h> - -#include "cros_cbi.h" -#include "fan.h" -#include "gpio/gpio.h" -#include "hooks.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -/* - * Pujjo fan support - */ -static void fan_init(void) -{ - int ret; - uint32_t val; - /* - * Retrieve the fan config. - */ - ret = cros_cbi_get_fw_config(FW_FAN, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", FW_FAN); - return; - } - if (val != FW_FAN_PRESENT) { - /* Disable the fan */ - fan_set_count(0); - } else { - /* Configure the fan enable GPIO */ - gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_fan_enable), - GPIO_OUTPUT); - } -} -DECLARE_HOOK(HOOK_INIT, fan_init, HOOK_PRIO_POST_FIRST); diff --git a/zephyr/projects/nissa/pujjo/src/form_factor.c b/zephyr/projects/nissa/pujjo/src/form_factor.c deleted file mode 100644 index 6b02a258bc..0000000000 --- a/zephyr/projects/nissa/pujjo/src/form_factor.c +++ /dev/null @@ -1,66 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/devicetree.h> -#include <zephyr/logging/log.h> - -#include "accelgyro.h" -#include "button.h" -#include "cros_board_info.h" -#include "cros_cbi.h" -#include "driver/accelgyro_bmi323.h" -#include "driver/accelgyro_lsm6dsm.h" -#include "gpio/gpio_int.h" -#include "hooks.h" -#include "motionsense_sensors.h" -#include "motion_sense.h" -#include "tablet_mode.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -static bool use_alt_sensor; - -void motion_interrupt(enum gpio_signal signal) -{ - if (use_alt_sensor) - lsm6dsm_interrupt(signal); - else - bmi3xx_interrupt(signal); -} - -static void sensor_init(void) -{ - int ret; - uint32_t val; - /* check which base sensor is used for motion_interrupt */ - use_alt_sensor = cros_cbi_ssfc_check_match( - CBI_SSFC_VALUE_ID(DT_NODELABEL(base_sensor_1))); - - motion_sensors_check_ssfc(); - - /* Check if it's tablet or not */ - ret = cros_cbi_get_fw_config(FW_TABLET, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", FW_TABLET); - return; - } - if (val == FW_TABLET_NOT_PRESENT) { - LOG_INF("Clamshell: disable motionsense function."); - motion_sensor_count = 0; - gmr_tablet_switch_disable(); - gpio_disable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_imu)); - gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_imu_int_l), - GPIO_DISCONNECTED); - - LOG_INF("Clamshell: disable volume button function."); - button_disable_gpio(BUTTON_VOLUME_UP); - button_disable_gpio(BUTTON_VOLUME_DOWN); - } else { - LOG_INF("Tablet: Enable motionsense function."); - } -} -DECLARE_HOOK(HOOK_INIT, sensor_init, HOOK_PRIO_POST_I2C); diff --git a/zephyr/projects/nissa/pujjo/src/hdmi.c b/zephyr/projects/nissa/pujjo/src/hdmi.c deleted file mode 100644 index 9461e7c53e..0000000000 --- a/zephyr/projects/nissa/pujjo/src/hdmi.c +++ /dev/null @@ -1,12 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "nissa_hdmi.h" - -__override void nissa_configure_hdmi_power_gpios(void) -{ - /* Pujjo needs to drive VCC enable but not core rails */ - nissa_configure_hdmi_vcc(); -} diff --git a/zephyr/projects/nissa/pujjo/src/keyboard.c b/zephyr/projects/nissa/pujjo/src/keyboard.c deleted file mode 100644 index 1587030080..0000000000 --- a/zephyr/projects/nissa/pujjo/src/keyboard.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "ec_commands.h" - -static const struct ec_response_keybd_config pujjo_kb = { - .num_top_row_keys = 10, - .action_keys = { - TK_BACK, /* T1 */ - TK_REFRESH, /* T2 */ - TK_FULLSCREEN, /* T3 */ - TK_OVERVIEW, /* T4 */ - TK_BRIGHTNESS_DOWN, /* T5 */ - TK_BRIGHTNESS_UP, /* T6 */ - TK_MICMUTE, /* T7 */ - TK_VOL_MUTE, /* T8 */ - TK_VOL_DOWN, /* T9 */ - TK_VOL_UP, /* T10 */ - }, - .capabilities = KEYBD_CAP_SCRNLOCK_KEY, -}; - -__override const struct ec_response_keybd_config * -board_vivaldi_keybd_config(void) -{ - return &pujjo_kb; -} diff --git a/zephyr/projects/nissa/pujjo/src/led.c b/zephyr/projects/nissa/pujjo/src/led.c deleted file mode 100644 index bd04af5a25..0000000000 --- a/zephyr/projects/nissa/pujjo/src/led.c +++ /dev/null @@ -1,134 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Pujjo specific PWM LED settings: there are 2 LEDs on each side of the board, - * each one can be controlled separately. The LED colors are white or amber, - * and the default behavior is tied to the charging process: both sides are - * amber while charging the battery and white when the battery is charged. - */ - -#include "common.h" -#include "led_onoff_states.h" -#include "led_common.h" -#include "gpio.h" - -#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ##args) -#define CPRINTF(format, args...) cprintf(CC_CHARGER, format, ##args) - -#define LED_OFF_LVL 1 -#define LED_ON_LVL 0 - -__override const int led_charge_lvl_1 = 5; - -__override const int led_charge_lvl_2 = 97; - -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = { { EC_LED_COLOR_RED, - LED_INDEFINITE } }, - [STATE_CHARGING_LVL_2] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_FULL_CHARGE] = { { EC_LED_COLOR_GREEN, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S0] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_DISCHARGE_S3] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_DISCHARGE_S5] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_BATTERY_ERROR] = { { EC_LED_COLOR_RED, 1 * LED_ONE_SEC }, - { LED_OFF, 1 * LED_ONE_SEC } }, - [STATE_FACTORY_TEST] = { { EC_LED_COLOR_RED, 2 * LED_ONE_SEC }, - { EC_LED_COLOR_GREEN, - 2 * LED_ONE_SEC } }, - }; - -__override const struct led_descriptor - led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = { - [PWR_LED_STATE_ON] = { { EC_LED_COLOR_WHITE, LED_INDEFINITE } }, - [PWR_LED_STATE_SUSPEND_AC] = { { EC_LED_COLOR_WHITE, - 3 * LED_ONE_SEC }, - { LED_OFF, 0.5 * LED_ONE_SEC } }, - [PWR_LED_STATE_SUSPEND_NO_AC] = { { EC_LED_COLOR_WHITE, - 3 * LED_ONE_SEC }, - { LED_OFF, - 0.5 * LED_ONE_SEC } }, - [PWR_LED_STATE_OFF] = { { LED_OFF, LED_INDEFINITE } }, - }; - -const enum ec_led_id supported_led_ids[] = { EC_LED_ID_BATTERY_LED, - EC_LED_ID_POWER_LED }; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -__override void led_set_color_power(enum ec_led_colors color) -{ - if (color == EC_LED_COLOR_WHITE) - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_power_led), - LED_ON_LVL); - else - /* LED_OFF and unsupported colors */ - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_power_led), - LED_OFF_LVL); -} - -__override void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_AMBER: - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_1_odl), - LED_ON_LVL); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_2_odl), - LED_ON_LVL); - break; - case EC_LED_COLOR_RED: - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_1_odl), - LED_ON_LVL); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_2_odl), - LED_OFF_LVL); - break; - case EC_LED_COLOR_GREEN: - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_1_odl), - LED_OFF_LVL); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_2_odl), - LED_ON_LVL); - break; - default: /* LED_OFF and other unsupported colors */ - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_1_odl), - LED_OFF_LVL); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_led_2_odl), - LED_OFF_LVL); - break; - } -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - brightness_range[EC_LED_COLOR_RED] = 1; - brightness_range[EC_LED_COLOR_AMBER] = 1; - brightness_range[EC_LED_COLOR_GREEN] = 1; - } else if (led_id == EC_LED_ID_POWER_LED) { - brightness_range[EC_LED_COLOR_WHITE] = 1; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - if (brightness[EC_LED_COLOR_RED] != 0) - led_set_color_battery(EC_LED_COLOR_RED); - else if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(EC_LED_COLOR_AMBER); - else if (brightness[EC_LED_COLOR_GREEN] != 0) - led_set_color_battery(EC_LED_COLOR_GREEN); - else - led_set_color_battery(LED_OFF); - } else if (led_id == EC_LED_ID_POWER_LED) { - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_power(EC_LED_COLOR_WHITE); - else - led_set_color_power(LED_OFF); - } - - return EC_SUCCESS; -} diff --git a/zephyr/projects/nissa/pujjo/src/usbc.c b/zephyr/projects/nissa/pujjo/src/usbc.c deleted file mode 100644 index 5d3d94c243..0000000000 --- a/zephyr/projects/nissa/pujjo/src/usbc.c +++ /dev/null @@ -1,242 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "charge_state_v2.h" -#include "chipset.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" -#include "driver/charger/isl923x_public.h" -#include "driver/retimer/anx7483_public.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/raa489000.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C0_TCPC, - .addr_flags = RAA489000_TCPC0_I2C_FLAGS, - }, - .drv = &raa489000_tcpm_drv, - /* RAA489000 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_VBUS_MONITOR, - }, -}; - -int board_is_sourcing_vbus(int port) -{ - int regval; - - tcpc_read(port, TCPC_REG_POWER_STATUS, ®val); - return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS); -} - -int board_set_active_charge_port(int port) -{ - int is_real_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - int old_port; - - if (!is_real_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - old_port = charge_manager_get_active_charge_port(); - - LOG_INF("New chg p%d", port); - - /* Disable all ports. */ - if (port == CHARGE_PORT_NONE) { - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW); - raa489000_enable_asgate(i, false); - } - - return EC_SUCCESS; - } - - /* Check if port is sourcing VBUS. */ - if (board_is_sourcing_vbus(port)) { - LOG_WRN("Skip enable p%d", port); - return EC_ERROR_INVAL; - } - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - if (i == port) - continue; - - if (tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW)) - LOG_WRN("p%d: sink path disable failed.", i); - raa489000_enable_asgate(i, false); - } - - /* - * Stop the charger IC from switching while changing ports. Otherwise, - * we can overcurrent the adapter we're switching to. (crbug.com/926056) - */ - if (old_port != CHARGE_PORT_NONE) - charger_discharge_on_ac(1); - - /* Enable requested charge port. */ - if (raa489000_enable_asgate(port, true) || - tcpc_write(port, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_HIGH)) { - LOG_WRN("p%d: sink path enable failed.", port); - charger_discharge_on_ac(0); - return EC_ERROR_UNKNOWN; - } - - /* Allow the charger IC to begin/continue switching. */ - charger_discharge_on_ac(0); - - return EC_SUCCESS; -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - int regval; - - /* - * The interrupt line is shared between the TCPC and BC1.2 detector IC. - * Therefore, go out and actually read the alert registers to report the - * alert status. - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl))) { - if (!tcpc_read16(0, TCPC_REG_ALERT, ®val)) { - /* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */ - if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0)) - regval &= ~((1 << 14) | (1 << 13) | (1 << 12)); - - if (regval) - status |= PD_STATUS_TCPC_ALERT_0; - } - } - return status; -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS */ - tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - if (port < 0 || port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return; - - raa489000_set_output_current(port, rp); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - if (port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return EC_ERROR_INVAL; - - /* Disable charging. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW); - if (rv) - return rv; - - /* Our policy is not to source VBUS when the AP is off. */ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - return EC_ERROR_NOT_POWERED; - - /* Provide Vbus. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH); - if (rv) - return rv; - - rv = raa489000_enable_asgate(port, true); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -void board_reset_pd_mcu(void) -{ - /* - * TODO(b:147316511): could send a reset command to the TCPC here - * if needed. - */ -} - -/* - * Because the TCPCs and BC1.2 chips share interrupt lines, it's possible - * for an interrupt to be lost if one asserts the IRQ, the other does the same - * then the first releases it: there will only be one falling edge to trigger - * the interrupt, and the line will be held low. We handle this by running a - * deferred check after a falling edge to see whether the IRQ is still being - * asserted. If it is, we assume an interrupt may have been lost and we need - * to poll each chip for events again. - */ -#define USBC_INT_POLL_DELAY_US 5000 - -static void poll_c0_int(void); -DECLARE_DEFERRED(poll_c0_int); - -static void usbc_interrupt_trigger(int port) -{ - schedule_deferred_pd_interrupt(port); - usb_charger_task_set_event(port, USB_CHG_EVENT_BC12); -} - -static inline void poll_usb_gpio(int port, const struct gpio_dt_spec *gpio, - const struct deferred_data *ud) -{ - if (!gpio_pin_get_dt(gpio)) { - usbc_interrupt_trigger(port); - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); - } -} - -static void poll_c0_int(void) -{ - poll_usb_gpio(0, GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl), - &poll_c0_int_data); -} - -void usb_interrupt(enum gpio_signal signal) -{ - int port; - const struct deferred_data *ud; - - if (signal == GPIO_SIGNAL(DT_NODELABEL(gpio_usb_c0_int_odl))) { - port = 0; - ud = &poll_c0_int_data; - } - /* - * We've just been called from a falling edge, so there's definitely - * no lost IRQ right now. Cancel any pending check. - */ - hook_call_deferred(ud, -1); - /* Trigger polling of TCPC and BC1.2 in respective tasks */ - usbc_interrupt_trigger(port); - /* Check for lost interrupts in a bit */ - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); -} diff --git a/zephyr/projects/nissa/src/board_power.c b/zephyr/projects/nissa/src/board_power.c deleted file mode 100644 index d7fb4aeffe..0000000000 --- a/zephyr/projects/nissa/src/board_power.c +++ /dev/null @@ -1,169 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/sys/atomic.h> -#include <zephyr/logging/log.h> -#include <zephyr/drivers/gpio.h> - -#include <ap_power/ap_power.h> -#include <ap_power/ap_power_events.h> -#include <ap_power/ap_power_interface.h> -#include <ap_power_override_functions.h> -#include <power_signals.h> -#include <x86_power_signals.h> - -#include "gpio_signal.h" -#include "gpio/gpio.h" - -LOG_MODULE_DECLARE(ap_pwrseq, LOG_LEVEL_INF); - -#define X86_NON_DSX_ADLP_NONPWRSEQ_FORCE_SHUTDOWN_TO_MS 5 - -static bool s0_stable; - -static void generate_ec_soc_dsw_pwrok_handler(int delay) -{ - int in_sig_val = power_signal_get(PWR_DSW_PWROK); - - if (in_sig_val != power_signal_get(PWR_EC_SOC_DSW_PWROK)) { - if (in_sig_val) - k_msleep(delay); - power_signal_set(PWR_EC_SOC_DSW_PWROK, 1); - } -} - -void board_ap_power_force_shutdown(void) -{ - int timeout_ms = X86_NON_DSX_ADLP_NONPWRSEQ_FORCE_SHUTDOWN_TO_MS; - - if (s0_stable) { - /* Enable these power signals in case of sudden shutdown */ - power_signal_enable(PWR_DSW_PWROK); - power_signal_enable(PWR_PG_PP1P05); - } - - power_signal_set(PWR_EC_SOC_DSW_PWROK, 0); - power_signal_set(PWR_EC_PCH_RSMRST, 0); - - while (power_signal_get(PWR_RSMRST) == 0 && - power_signal_get(PWR_SLP_SUS) == 0 && timeout_ms > 0) { - k_msleep(1); - timeout_ms--; - } - if (power_signal_get(PWR_SLP_SUS) == 0) { - LOG_WRN("SLP_SUS is not deasserted! Assuming G3"); - } - - if (power_signal_get(PWR_RSMRST) == 1) { - LOG_WRN("RSMRST is not deasserted! Assuming G3"); - } - - power_signal_set(PWR_EN_PP3300_A, 0); - - power_signal_set(PWR_EN_PP5000_A, 0); - - timeout_ms = X86_NON_DSX_ADLP_NONPWRSEQ_FORCE_SHUTDOWN_TO_MS; - while (power_signal_get(PWR_DSW_PWROK) && timeout_ms > 0) { - k_msleep(1); - timeout_ms--; - }; - - if (power_signal_get(PWR_DSW_PWROK)) - LOG_WRN("DSW_PWROK didn't go low! Assuming G3."); - - power_signal_disable(PWR_DSW_PWROK); - power_signal_disable(PWR_PG_PP1P05); - s0_stable = false; -} - -void board_ap_power_action_g3_s5(void) -{ - power_signal_enable(PWR_DSW_PWROK); - power_signal_enable(PWR_PG_PP1P05); - - LOG_DBG("Turning on PWR_EN_PP5000_A and PWR_EN_PP3300_A"); - power_signal_set(PWR_EN_PP5000_A, 1); - power_signal_set(PWR_EN_PP3300_A, 1); - - power_wait_signals_timeout(IN_PGOOD_ALL_CORE, - AP_PWRSEQ_DT_VALUE(wait_signal_timeout)); - - generate_ec_soc_dsw_pwrok_handler(AP_PWRSEQ_DT_VALUE(dsw_pwrok_delay)); - s0_stable = false; -} - -void board_ap_power_action_s3_s0(void) -{ - s0_stable = false; -} - -void board_ap_power_action_s0_s3(void) -{ - power_signal_enable(PWR_DSW_PWROK); - power_signal_enable(PWR_PG_PP1P05); - s0_stable = false; -} - -void board_ap_power_action_s0(void) -{ - if (s0_stable) { - return; - } - LOG_INF("Reaching S0"); - power_signal_disable(PWR_DSW_PWROK); - power_signal_disable(PWR_PG_PP1P05); - s0_stable = true; -} - -int board_ap_power_assert_pch_power_ok(void) -{ - /* Pass though PCH_PWROK */ - if (power_signal_get(PWR_PCH_PWROK) == 0) { - k_msleep(AP_PWRSEQ_DT_VALUE(pch_pwrok_delay)); - power_signal_set(PWR_PCH_PWROK, 1); - } - - return 0; -} - -bool board_ap_power_check_power_rails_enabled(void) -{ - return power_signal_get(PWR_EN_PP3300_A) && - power_signal_get(PWR_EN_PP5000_A) && - power_signal_get(PWR_EC_SOC_DSW_PWROK); -} - -int board_power_signal_get(enum power_signal signal) -{ - switch (signal) { - default: - LOG_ERR("Unknown signal for board get: %d", signal); - return -EINVAL; - - case PWR_ALL_SYS_PWRGD: - /* - * All system power is good. - * Checks that PWR_SLP_S3 is off, and - * the GPIO signal for all power good is set, - * and that the 1.05 volt line is ready. - */ - if (power_signal_get(PWR_SLP_S3)) { - return 0; - } - if (!gpio_pin_get_dt( - GPIO_DT_FROM_NODELABEL(gpio_all_sys_pwrgd))) { - return 0; - } - if (!power_signal_get(PWR_PG_PP1P05)) { - return 0; - } - return 1; - } -} - -int board_power_signal_set(enum power_signal signal, int value) -{ - return -EINVAL; -} diff --git a/zephyr/projects/nissa/src/common.c b/zephyr/projects/nissa/src/common.c deleted file mode 100644 index 78f703ae49..0000000000 --- a/zephyr/projects/nissa/src/common.c +++ /dev/null @@ -1,154 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/device.h> -#include <ap_power/ap_power.h> - -#include "battery.h" -#include "charger.h" -#include "charge_state_v2.h" -#include "chipset.h" -#include "cros_cbi.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" - -#include "nissa_common.h" - -#include <zephyr/logging/log.h> -LOG_MODULE_REGISTER(nissa, CONFIG_NISSA_LOG_LEVEL); - -static uint8_t cached_usb_pd_port_count; - -__override uint8_t board_get_usb_pd_port_count(void) -{ - __ASSERT(cached_usb_pd_port_count != 0, - "sub-board detection did not run before a port count request"); - if (cached_usb_pd_port_count == 0) - LOG_WRN("USB PD Port count not initialized!"); - return cached_usb_pd_port_count; -} - -static void board_power_change(struct ap_power_ev_callback *cb, - struct ap_power_ev_data data) -{ - /* - * Enable power to pen garage when system is active (safe even if no - * pen is present). - */ - const struct gpio_dt_spec *const pen_power_gpio = - GPIO_DT_FROM_NODELABEL(gpio_en_pp5000_pen_x); - - switch (data.event) { - case AP_POWER_STARTUP: - gpio_pin_set_dt(pen_power_gpio, 1); - break; - case AP_POWER_SHUTDOWN: - gpio_pin_set_dt(pen_power_gpio, 0); - break; - default: - break; - } -} - -/* - * Initialise the USB PD port count, which - * depends on which sub-board is attached. - */ -static void board_setup_init(void) -{ - static struct ap_power_ev_callback cb; - - ap_power_ev_init_callback(&cb, board_power_change, - AP_POWER_STARTUP | AP_POWER_SHUTDOWN); - ap_power_ev_add_callback(&cb); - - switch (nissa_get_sb_type()) { - default: - cached_usb_pd_port_count = 1; - break; - - case NISSA_SB_C_A: - case NISSA_SB_C_LTE: - cached_usb_pd_port_count = 2; - break; - } -} -/* - * Make sure setup is done after EEPROM is readable. - */ -DECLARE_HOOK(HOOK_INIT, board_setup_init, HOOK_PRIO_INIT_I2C); - -__overridable void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT); - - /* - * Assume charger overdraws by about 4%, keeping the actual draw - * within spec. This adjustment can be changed with characterization - * of actual hardware. - */ - icl = icl * 96 / 100; - charge_set_input_current_limit(icl, charge_mv); -} - -int pd_check_vconn_swap(int port) -{ - /* Allow VCONN swaps if the AP is on. */ - return chipset_in_state(CHIPSET_STATE_ANY_SUSPEND | CHIPSET_STATE_ON); -} - -/* - * Count of chargers depends on sub board presence. - */ -__override uint8_t board_get_charger_chip_count(void) -{ - return board_get_usb_pd_port_count(); -} - -/* - * Retrieve sub-board type from FW_CONFIG. - */ -enum nissa_sub_board_type nissa_get_sb_type(void) -{ - static enum nissa_sub_board_type sb = NISSA_SB_UNKNOWN; - int ret; - uint32_t val; - - /* - * Return cached value. - */ - if (sb != NISSA_SB_UNKNOWN) - return sb; - - sb = NISSA_SB_NONE; /* Defaults to none */ - ret = cros_cbi_get_fw_config(FW_SUB_BOARD, &val); - if (ret != 0) { - LOG_WRN("Error retrieving CBI FW_CONFIG field %d", - FW_SUB_BOARD); - return sb; - } - switch (val) { - default: - LOG_WRN("No sub-board defined"); - break; - case FW_SUB_BOARD_1: - sb = NISSA_SB_C_A; - LOG_INF("SB: USB type C, USB type A"); - break; - - case FW_SUB_BOARD_2: - sb = NISSA_SB_C_LTE; - LOG_INF("SB: USB type C, WWAN LTE"); - break; - - case FW_SUB_BOARD_3: - sb = NISSA_SB_HDMI_A; - LOG_INF("SB: HDMI, USB type A"); - break; - } - return sb; -} diff --git a/zephyr/projects/nissa/src/led.c b/zephyr/projects/nissa/src/led.c deleted file mode 100644 index 2617d0092d..0000000000 --- a/zephyr/projects/nissa/src/led.c +++ /dev/null @@ -1,52 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery LED control for nissa - */ -#include "common.h" -#include "ec_commands.h" -#include "led_common.h" -#include "led_onoff_states.h" -#include "led_pwm.h" - -__override const int led_charge_lvl_1 = 5; -__override const int led_charge_lvl_2 = 97; -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = { { EC_LED_COLOR_RED, - LED_INDEFINITE } }, - [STATE_CHARGING_LVL_2] = { { EC_LED_COLOR_AMBER, - LED_INDEFINITE } }, - [STATE_CHARGING_FULL_CHARGE] = { { EC_LED_COLOR_GREEN, - LED_INDEFINITE } }, - [STATE_DISCHARGE_S0] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_DISCHARGE_S0_BAT_LOW] = { { EC_LED_COLOR_AMBER, - 1 * LED_ONE_SEC }, - { LED_OFF, 3 * LED_ONE_SEC } }, - [STATE_DISCHARGE_S3] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_DISCHARGE_S5] = { { LED_OFF, LED_INDEFINITE } }, - [STATE_BATTERY_ERROR] = { { EC_LED_COLOR_RED, 1 * LED_ONE_SEC }, - { LED_OFF, 1 * LED_ONE_SEC } }, - [STATE_FACTORY_TEST] = { { EC_LED_COLOR_RED, 2 * LED_ONE_SEC }, - { EC_LED_COLOR_GREEN, - 2 * LED_ONE_SEC } }, - }; - -__override void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_RED: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_RED); - break; - case EC_LED_COLOR_GREEN: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_GREEN); - break; - case EC_LED_COLOR_AMBER: - set_pwm_led_color(EC_LED_ID_BATTERY_LED, EC_LED_COLOR_AMBER); - break; - default: /* LED_OFF and other unsupported colors */ - set_pwm_led_color(EC_LED_ID_BATTERY_LED, -1); - break; - } -} diff --git a/zephyr/projects/nissa/src/sub_board.c b/zephyr/projects/nissa/src/sub_board.c deleted file mode 100644 index 3ccbcd9325..0000000000 --- a/zephyr/projects/nissa/src/sub_board.c +++ /dev/null @@ -1,298 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Nissa sub-board hardware configuration */ - -#include <ap_power/ap_power.h> -#include <zephyr/drivers/gpio.h> -#include <zephyr/drivers/pinctrl.h> -#include <zephyr/init.h> -#include <zephyr/kernel.h> -#include <zephyr/sys/printk.h> - -#include "cros_board_info.h" -#include "driver/tcpm/tcpci.h" -#include "gpio/gpio_int.h" -#include "hooks.h" -#include "usb_charge.h" -#include "usb_pd.h" -#include "usbc/usb_muxes.h" -#include "task.h" - -#include "nissa_common.h" -#include "nissa_hdmi.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -#if NISSA_BOARD_HAS_HDMI_SUPPORT -static void hdmi_power_handler(struct ap_power_ev_callback *cb, - struct ap_power_ev_data data) -{ - /* Enable VCC on the HDMI port. */ - const struct gpio_dt_spec *s3_rail = - GPIO_DT_FROM_ALIAS(gpio_hdmi_en_odl); - /* Connect AP's DDC to sub-board (default is USB-C aux) */ - const struct gpio_dt_spec *ddc_select = - GPIO_DT_FROM_NODELABEL(gpio_hdmi_sel); - - switch (data.event) { - case AP_POWER_PRE_INIT: - LOG_DBG("Connecting HDMI DDC to sub-board"); - gpio_pin_set_dt(ddc_select, 1); - break; - case AP_POWER_STARTUP: - LOG_DBG("Enabling HDMI VCC"); - gpio_pin_set_dt(s3_rail, 1); - break; - case AP_POWER_SHUTDOWN: - LOG_DBG("Disabling HDMI VCC"); - gpio_pin_set_dt(s3_rail, 0); - break; - case AP_POWER_HARD_OFF: - LOG_DBG("Disconnecting HDMI sub-board DDC"); - gpio_pin_set_dt(ddc_select, 0); - break; - default: - LOG_ERR("Unhandled HDMI power event %d", data.event); - break; - } -} - -static void hdmi_hpd_interrupt(const struct device *device, - struct gpio_callback *callback, - gpio_port_pins_t pins) -{ - int state = gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_hpd_odl)); - - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_soc_hdmi_hpd), state); - LOG_DBG("HDMI HPD changed state to %d", state); -} - -void nissa_configure_hdmi_rails(void) -{ -#if DT_NODE_EXISTS(GPIO_DT_FROM_ALIAS(gpio_en_rails_odl)) - gpio_pin_configure_dt(GPIO_DT_FROM_ALIAS(gpio_en_rails_odl), - GPIO_OUTPUT_INACTIVE | GPIO_OPEN_DRAIN | - GPIO_PULL_UP | GPIO_ACTIVE_LOW); -#endif -} - -void nissa_configure_hdmi_vcc(void) -{ - gpio_pin_configure_dt(GPIO_DT_FROM_ALIAS(gpio_hdmi_en_odl), - GPIO_OUTPUT_INACTIVE | GPIO_OPEN_DRAIN | - GPIO_ACTIVE_LOW); -} - -__overridable void nissa_configure_hdmi_power_gpios(void) -{ - nissa_configure_hdmi_rails(); -} - -#ifdef CONFIG_SOC_IT8XXX2 -/* - * On it8xxx2, the below condition will break the EC to enter deep doze mode - * (b:237717730): - * Enhance i2c (GPE0/E7, GPH1/GPH2 or GPA4/GPA5) is enabled and its clock and - * data pins aren't both at high level. - * - * Since HDMI+type A SKU doesn't use i2c4, disable it for better power number. - */ -#define I2C4_NODE DT_NODELABEL(i2c4) -#if DT_NODE_EXISTS(I2C4_NODE) -PINCTRL_DT_DEFINE(I2C4_NODE); - -/* disable i2c4 alternate function */ -static void soc_it8xxx2_disable_i2c4_alt(void) -{ - const struct pinctrl_dev_config *pcfg = - PINCTRL_DT_DEV_CONFIG_GET(I2C4_NODE); - - pinctrl_apply_state(pcfg, PINCTRL_STATE_SLEEP); -} -#endif /* DT_NODE_EXISTS(I2C4_NODE) */ -#endif /* CONFIG_SOC_IT8XXX2 */ -#endif /* NISSA_BOARD_HAS_HDMI_SUPPORT */ - -static void lte_power_handler(struct ap_power_ev_callback *cb, - struct ap_power_ev_data data) -{ - /* Enable rails for S5 */ - const struct gpio_dt_spec *s5_rail = - GPIO_DT_FROM_ALIAS(gpio_en_sub_s5_rails); - switch (data.event) { - case AP_POWER_PRE_INIT: - LOG_DBG("Enabling LTE sub-board power rails"); - gpio_pin_set_dt(s5_rail, 1); - break; - case AP_POWER_HARD_OFF: - LOG_DBG("Disabling LTE sub-board power rails"); - gpio_pin_set_dt(s5_rail, 0); - break; - default: - LOG_ERR("Unhandled LTE power event %d", data.event); - break; - } -} - -/** - * Configure GPIOs (and other pin functions) that vary with present sub-board. - * - * The functions of some pins vary according to which sub-board is present - * (indicated by CBI fw_config); this function configures them according to the - * needs of the present sub-board. - */ -static void nereid_subboard_config(void) -{ - enum nissa_sub_board_type sb = nissa_get_sb_type(); - static struct ap_power_ev_callback power_cb; - - /* - * USB-A port: current limit output is configured by default and unused - * if this port is not present. VBUS enable must be configured if - * needed and is controlled by the usba-port-enable-pins driver. - */ - if (sb == NISSA_SB_C_A || sb == NISSA_SB_HDMI_A || - sb == NISSA_SB_NONE) { - /* - * Configure VBUS enable, default off. - * SB_NONE indicates missing fw_config; it's safe to enable VBUS - * control in this case since all that will happen is we turn - * off power to LTE, and it's useful to allow USB-A to work in - * such a configuration. - */ - gpio_pin_configure_dt(GPIO_DT_FROM_ALIAS(gpio_en_usb_a1_vbus), - GPIO_OUTPUT_LOW); - } else { - /* Turn off unused pins */ - gpio_pin_configure_dt( - GPIO_DT_FROM_NODELABEL(gpio_sub_usb_a1_ilimit_sdp), - GPIO_DISCONNECTED); - gpio_pin_configure_dt(GPIO_DT_FROM_ALIAS(gpio_en_usb_a1_vbus), - GPIO_DISCONNECTED); - /* Disable second USB-A port enable GPIO */ - __ASSERT(USB_PORT_ENABLE_COUNT == 2, - "USB A port count != 2 (%d)", USB_PORT_ENABLE_COUNT); - usb_port_enable[1] = -1; - } - /* - * USB-C port: the default configuration has I2C on the I2C pins, - * but the interrupt line needs to be configured. - */ -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - if (sb == NISSA_SB_C_A || sb == NISSA_SB_C_LTE) { - /* Configure interrupt input */ - gpio_pin_configure_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl), - GPIO_INPUT | GPIO_PULL_UP); - } else { - /* Port doesn't exist, doesn't need muxing */ - USB_MUX_ENABLE_ALTERNATIVE(usb_mux_chain_1_no_mux); - } -#endif - - switch (sb) { -#if NISSA_BOARD_HAS_HDMI_SUPPORT - case NISSA_SB_HDMI_A: { - /* - * HDMI: two outputs control power which must be configured to - * non-default settings, and HPD must be forwarded to the AP - * on another output pin. - */ - const struct gpio_dt_spec *hpd_gpio = - GPIO_DT_FROM_ALIAS(gpio_hpd_odl); - static struct gpio_callback hdmi_hpd_cb; - int rv, irq_key; - - nissa_configure_hdmi_power_gpios(); - -#if CONFIG_SOC_IT8XXX2 && DT_NODE_EXISTS(I2C4_NODE) - /* disable i2c4 alternate function for better power number */ - soc_it8xxx2_disable_i2c4_alt(); -#endif - - /* - * Control HDMI power according to AP power state. Some events - * won't do anything if the corresponding pin isn't configured, - * but that's okay. - */ - ap_power_ev_init_callback( - &power_cb, hdmi_power_handler, - AP_POWER_PRE_INIT | AP_POWER_HARD_OFF | - AP_POWER_STARTUP | AP_POWER_SHUTDOWN); - ap_power_ev_add_callback(&power_cb); - - /* - * Configure HPD input from sub-board; it's inverted by a buffer - * on the sub-board. - */ - gpio_pin_configure_dt(hpd_gpio, GPIO_INPUT | GPIO_ACTIVE_LOW); - /* Register interrupt handler for HPD changes */ - gpio_init_callback(&hdmi_hpd_cb, hdmi_hpd_interrupt, - BIT(hpd_gpio->pin)); - gpio_add_callback(hpd_gpio->port, &hdmi_hpd_cb); - rv = gpio_pin_interrupt_configure_dt(hpd_gpio, - GPIO_INT_EDGE_BOTH); - __ASSERT(rv == 0, - "HPD interrupt configuration returned error %d", rv); - /* - * Run the HPD handler once to ensure output is in sync. - * Lock interrupts to ensure that we don't cause desync if an - * HPD interrupt comes in between the internal read of the input - * and write to the output. - */ - irq_key = irq_lock(); - hdmi_hpd_interrupt(hpd_gpio->port, &hdmi_hpd_cb, - BIT(hpd_gpio->pin)); - irq_unlock(irq_key); - break; - } -#endif - case NISSA_SB_C_LTE: - /* - * LTE: Set up callbacks for enabling/disabling - * sub-board power on S5 state. - */ - gpio_pin_configure_dt(GPIO_DT_FROM_ALIAS(gpio_en_sub_s5_rails), - GPIO_OUTPUT_INACTIVE); - /* Control LTE power when CPU entering or - * exiting S5 state. - */ - ap_power_ev_init_callback(&power_cb, lte_power_handler, - AP_POWER_HARD_OFF | - AP_POWER_PRE_INIT); - ap_power_ev_add_callback(&power_cb); - break; - - default: - break; - } -} -DECLARE_HOOK(HOOK_INIT, nereid_subboard_config, HOOK_PRIO_POST_FIRST); - -/* - * Enable interrupts - */ -static void board_init(void) -{ - /* - * Enable USB-C interrupts. - */ - gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_usb_c0)); -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - if (board_get_usb_pd_port_count() == 2) - gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_usb_c1)); -#endif -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -/* Trigger shutdown by enabling the Z-sleep circuit */ -__override void board_hibernate_late(void) -{ - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_en_slp_z), 1); - /* - * The system should hibernate, but there may be - * a small delay, so return. - */ -} diff --git a/zephyr/projects/nissa/xivu/cbi.dtsi b/zephyr/projects/nissa/xivu/cbi.dtsi deleted file mode 100644 index 4149ea291c..0000000000 --- a/zephyr/projects/nissa/xivu/cbi.dtsi +++ /dev/null @@ -1,77 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - /* Xivu-specific fw_config fields. */ - nissa-fw-config { - /* - * FW_CONFIG field to enable WFC or not. - */ - wfc { - enum-name = "FW_WFC"; - start = <0>; - size = <1>; - - wfc-mipi { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_WFC_MIPI"; - value = <0>; - }; - wfc-absent { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_WFC_ABSENT"; - value = <1>; - }; - }; - - /* - * FW_CONFIG field to enable stylus or not. - */ - stylus { - enum-name = "FW_STYLUS"; - start = <1>; - size = <1>; - - stylus-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_STYLUS_PRESENT"; - value = <0>; - }; - stylus-absent { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_STYLUS_ABSENT"; - value = <1>; - }; - }; - /* - * FW_CONFIG field to indicate which sub-board - * is attached. - */ - sub-board { - enum-name = "FW_SUB_BOARD"; - start = <2>; - size = <2>; - - sub-board-1 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_SUB_BOARD_1"; - value = <0>; - }; - sub-board-2 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_SUB_BOARD_2"; - value = <1>; - }; - sub-board-3 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_SUB_BOARD_3"; - value = <2>; - }; - }; - -/delete-node/ fan; - }; - -}; diff --git a/zephyr/projects/nissa/xivu/generated.dtsi b/zephyr/projects/nissa/xivu/generated.dtsi deleted file mode 100644 index 383054adf8..0000000000 --- a/zephyr/projects/nissa/xivu/generated.dtsi +++ /dev/null @@ -1,291 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * This file is auto-generated - do not edit! - */ - -/ { - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ec_vsense_pp1050_proc: ec_vsense_pp1050_proc { - enum-name = "ADC_PP1050_PROC"; - io-channels = <&adc0 4>; - }; - adc_ec_vsense_pp3300_s5: ec_vsense_pp3300_s5 { - enum-name = "ADC_PP3300_S5"; - io-channels = <&adc0 6>; - }; - adc_temp_sensor_1: temp_sensor_1 { - enum-name = "ADC_TEMP_SENSOR_1"; - io-channels = <&adc0 0>; - }; - adc_temp_sensor_2: temp_sensor_2 { - enum-name = "ADC_TEMP_SENSOR_2"; - io-channels = <&adc0 1>; - }; - adc_temp_sensor_3: temp_sensor_3 { - enum-name = "ADC_TEMP_SENSOR_3"; - io-channels = <&adc0 10>; - }; - adc_temp_sensor_4: temp_sensor_4 { - enum-name = "ADC_TEMP_SENSOR_4"; - io-channels = <&adc0 11>; - }; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_acc_int_l: acc_int_l { - gpios = <&gpio5 0 GPIO_INPUT>; - }; - gpio_all_sys_pwrgd: all_sys_pwrgd { - gpios = <&gpioa 7 GPIO_INPUT>; - }; - gpio_ccd_mode_odl: ccd_mode_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - gpio_cpu_c10_gate_l: cpu_c10_gate_l { - gpios = <&gpio6 7 GPIO_INPUT>; - }; - gpio_ec_battery_pres_odl: ec_battery_pres_odl { - gpios = <&gpioa 3 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - gpio_ec_cbi_wp: ec_cbi_wp { - gpios = <&gpio7 4 GPIO_OUTPUT>; - }; - gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - gpios = <&gpiod 3 GPIO_ODR_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_entering_rw: ec_entering_rw { - gpios = <&gpio0 3 GPIO_OUTPUT>; - enum-name = "GPIO_ENTERING_RW"; - }; - gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - gpios = <&gpio7 5 GPIO_OUTPUT>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_kso_02_inv: ec_kso_02_inv { - gpios = <&gpio1 7 (GPIO_OUTPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_odl { - gpios = <&gpiob 0 GPIO_ODR_LOW>; - }; - gpio_ec_prochot_odl: ec_prochot_odl { - gpios = <&gpiof 1 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - gpios = <&gpio6 1 GPIO_OUTPUT>; - }; - gpio_ec_acok_otg_c1: ec_acok_otg_c1 { - gpios = <&gpioe 4 GPIO_OUTPUT>; - }; - gpio_ec_soc_int_odl: ec_soc_int_odl { - gpios = <&gpio8 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - gpios = <&gpio7 2 GPIO_ODR_HIGH>; - }; - gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - gpios = <&gpioc 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - gpios = <&gpioa 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_rtcrst: ec_soc_rtcrst { - gpios = <&gpio7 6 GPIO_OUTPUT>; - }; - gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - gpios = <&gpio3 7 GPIO_OUTPUT>; - }; - gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - gpios = <&gpioa 4 GPIO_ODR_HIGH>; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpioa 1 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_en_pp3300_s5: en_pp3300_s5 { - gpios = <&gpiob 6 GPIO_OUTPUT>; - enum-name = "GPIO_TEMP_SENSOR_POWER"; - }; - gpio_en_pp5000_pen_x: en_pp5000_pen_x { - gpios = <&gpioe 2 GPIO_OUTPUT>; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpio4 0 GPIO_OUTPUT>; - }; - gpio_en_slp_z: en_slp_z { - gpios = <&gpioe 1 GPIO_OUTPUT>; - }; - gpio_en_usb_a0_vbus: en_usb_a0_vbus { - gpios = <&gpio9 1 GPIO_OUTPUT>; - }; - gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpio0 0 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_ec_acok_otg_c0: ec_acok_otg_c0 { - gpios = <&gpioc 6 GPIO_OUTPUT>; - }; - gpio_imu_int_l: imu_int_l { - gpios = <&gpio5 6 GPIO_INPUT>; - }; - gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - gpios = <&gpio4 3 GPIO_INPUT>; - }; - gpio_lid_open: lid_open { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_pen_detect_odl: pen_detect_odl { - gpios = <&gpio9 6 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - gpios = <&gpiof 0 GPIO_INPUT>; - }; - gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - gpios = <&gpio4 2 GPIO_INPUT>; - }; - gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - gpios = <&gpio9 4 GPIO_INPUT_PULL_UP>; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpio9 7 GPIO_INPUT>; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioa 5 GPIO_INPUT>; - }; - gpio_slp_s4_l: slp_s4_l { - gpios = <&gpio7 0 GPIO_INPUT>; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpio6 2 GPIO_INPUT>; - }; - gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - gpios = <&gpiod 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB2_ILIM_SEL"; - }; - gpio_sys_rst_odl: sys_rst_odl { - gpios = <&gpioc 5 GPIO_ODR_HIGH>; - }; - gpio_tablet_mode_l: tablet_mode_l { - gpios = <&gpio9 5 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - }; - gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - gpios = <&gpio3 3 GPIO_OUTPUT>; - enum-name = "GPIO_USB1_ILIM_SEL"; - }; - gpio_usb_c0_int_odl: usb_c0_int_odl { - gpios = <&gpio0 1 GPIO_INPUT_PULL_UP>; - }; - gpio_vccin_aux_vid0: vccin_aux_vid0 { - gpios = <&gpio9 2 GPIO_INPUT>; - }; - gpio_vccin_aux_vid1: vccin_aux_vid1 { - gpios = <&gpioe 3 GPIO_INPUT>; - }; - gpio_voldn_btn_odl: voldn_btn_odl { - gpios = <&gpioa 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_DOWN_L"; - }; - gpio_volup_btn_odl: volup_btn_odl { - gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_VOLUME_UP_L"; - }; - }; - - named-i2c-ports { - compatible = "named-i2c-ports"; - - i2c_ec_i2c_eeprom: ec_i2c_eeprom { - i2c-port = <&i2c0_0>; - enum-names = "I2C_PORT_EEPROM"; - }; - i2c_ec_i2c_sensor: ec_i2c_sensor { - i2c-port = <&i2c1_0>; - enum-names = "I2C_PORT_SENSOR"; - }; - i2c_ec_i2c_usb_c0: ec_i2c_usb_c0 { - i2c-port = <&i2c3_0>; - enum-names = "I2C_PORT_USB_C0_TCPC"; - }; - i2c_ec_i2c_sub_usb_c1: ec_i2c_sub_usb_c1 { - i2c-port = <&i2c5_1>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - }; - i2c_ec_i2c_batt: ec_i2c_batt { - i2c-port = <&i2c7_0>; - enum-names = "I2C_PORT_BATTERY"; - }; - }; -}; - -&adc0 { - status = "okay"; - pinctrl-0 = <&adc0_chan0_gp45 - &adc0_chan1_gp44 - &adc0_chan4_gp41 - &adc0_chan6_gp34 - &adc0_chan10_gpe0 - &adc0_chan11_gpc7>; - pinctrl-names = "default"; -}; - -&i2c0_0 { - status = "okay"; - pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; - pinctrl-names = "default"; -}; - -&i2c1_0 { - status = "okay"; - pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; - pinctrl-names = "default"; -}; - -&i2c3_0 { - status = "okay"; - pinctrl-0 = <&i2c3_0_sda_scl_gpd0_d1>; - pinctrl-names = "default"; -}; - -&i2c5_1 { - status = "okay"; - pinctrl-0 = <&i2c5_1_sda_scl_gpf4_f5>; - pinctrl-names = "default"; -}; - -&i2c7_0 { - status = "okay"; - pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; - pinctrl-names = "default"; -}; - -&i2c_ctrl0 { - status = "okay"; -}; - -&i2c_ctrl1 { - status = "okay"; -}; - -&i2c_ctrl3 { - status = "okay"; -}; - -&i2c_ctrl5 { - status = "okay"; -}; - -&i2c_ctrl7 { - status = "okay"; -}; diff --git a/zephyr/projects/nissa/xivu/keyboard.dtsi b/zephyr/projects/nissa/xivu/keyboard.dtsi deleted file mode 100644 index 5248c4aaff..0000000000 --- a/zephyr/projects/nissa/xivu/keyboard.dtsi +++ /dev/null @@ -1,34 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -&cros_kb_raw { - status = "okay"; - /* No KSO2 (it's inverted and implemented by GPIO) */ - pinctrl-0 = < - &ksi0_gp31 - &ksi1_gp30 - &ksi2_gp27 - &ksi3_gp26 - &ksi4_gp25 - &ksi5_gp24 - &ksi6_gp23 - &ksi7_gp22 - &kso00_gp21 - &kso01_gp20 - &kso03_gp16 - &kso04_gp15 - &kso05_gp14 - &kso06_gp13 - &kso07_gp12 - &kso08_gp11 - &kso09_gp10 - &kso10_gp07 - &kso11_gp06 - &kso12_gp05 - &kso13_gp04 - &kso14_gp82 - >; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/xivu/led_pins.dtsi b/zephyr/projects/nissa/xivu/led_pins.dtsi deleted file mode 100644 index d85004a0c9..0000000000 --- a/zephyr/projects/nissa/xivu/led_pins.dtsi +++ /dev/null @@ -1,94 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - pwm_pins { - compatible = "cros-ec,pwm-pin-config"; - pwm_led_y_c0: pwm_led_y_c0 { - #led-pin-cells = <1>; - pwms = <&pwm2 0 PWM_HZ(324) PWM_POLARITY_INVERTED>; - }; - - pwm_led_w_c0: pwm_led_w_c0 { - #led-pin-cells = <1>; - pwms = <&pwm0 0 PWM_HZ(324) PWM_POLARITY_INVERTED>; - }; - - pwm_led_y_c1: pwm_led_y_c1 { - #led-pin-cells = <1>; - pwms = <&pwm6 0 PWM_HZ(324) PWM_POLARITY_INVERTED>; - }; - - pwm_led_w_c1: pwm_led_w_c1 { - #led-pin-cells = <1>; - pwms = <&pwm1 0 PWM_HZ(324) PWM_POLARITY_INVERTED>; - }; - }; - - pwm-led-pins { - compatible = "cros-ec,pwm-led-pins"; - - color_off: color-off { - led-color = "LED_OFF"; - led-id = "EC_LED_ID_BATTERY_LED"; - led-pins = <&pwm_led_y_c0 0>, - <&pwm_led_y_c1 0>, - <&pwm_led_w_c0 0>, - <&pwm_led_w_c1 0>; - }; - - color_amber: color-amber { - led-color = "LED_AMBER"; - led-id = "EC_LED_ID_BATTERY_LED"; - br-color = "EC_LED_COLOR_AMBER"; - led-pins = <&pwm_led_y_c0 1>, - <&pwm_led_y_c1 1>, - <&pwm_led_w_c0 0>, - <&pwm_led_w_c1 0>; - }; - - color_white: color-white { - led-color = "LED_WHITE"; - led-id = "EC_LED_ID_BATTERY_LED"; - br-color = "EC_LED_COLOR_WHITE"; - led-pins = <&pwm_led_y_c0 0>, - <&pwm_led_y_c1 0>, - <&pwm_led_w_c0 1>, - <&pwm_led_w_c1 1>; - }; - }; -}; - -/* LED2 */ -&pwm0 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm0_gpc3>; - pinctrl-names = "default"; -}; - -/* LED3 */ -&pwm1 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm1_gpc2>; - pinctrl-names = "default"; -}; - -/* LED1 */ -&pwm2 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm2_gpc4>; - pinctrl-names = "default"; -}; - -/* LED0 */ -&pwm6 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; - pinctrl-0 = <&pwm6_gpc0>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/xivu/led_policy.dtsi b/zephyr/projects/nissa/xivu/led_policy.dtsi deleted file mode 100644 index 562e361ec5..0000000000 --- a/zephyr/projects/nissa/xivu/led_policy.dtsi +++ /dev/null @@ -1,122 +0,0 @@ -/ { - led-colors { - compatible = "cros-ec,led-policy"; - - power-state-charge { - charge-state = "PWR_STATE_CHARGE"; - /* Battery percent range (>= Empty, <= 94%) */ - batt-lvl = <0 94>; - - color-0 { - led-color = <&color_amber>; - }; - }; - - power-state-charge-lvl-2 { - charge-state = "PWR_STATE_CHARGE"; - /* Battery percent range (>= 95%, <= Near Full) */ - batt-lvl = <95 97>; - - color-0 { - led-color = <&color_white>; - }; - }; - - power-state-near-full { - charge-state = "PWR_STATE_CHARGE_NEAR_FULL"; - - color-0 { - led-color = <&color_white>; - }; - }; - - power-state-discharge-s0 { - charge-state = "PWR_STATE_DISCHARGE"; - chipset-state = "POWER_S0"; - /* Battery percent range (>= 11%, <= Full) */ - batt-lvl = <11 100>; - - color-0 { - led-color = <&color_white>; - }; - }; - - power-state-discharge-s3 { - charge-state = "PWR_STATE_DISCHARGE"; - chipset-state = "POWER_S3"; - - /* White 1 sec, off 3 sec */ - color-0 { - led-color = <&color_white>; - period-ms = <1000>; - }; - color-1 { - led-color = <&color_off>; - period-ms = <3000>; - }; - }; - - power-state-discharge-s5 { - charge-state = "PWR_STATE_DISCHARGE"; - chipset-state = "POWER_S5"; - - color-0 { - led-color = <&color_off>; - }; - }; - - power-state-discharge-s0-batt-low { - charge-state = "PWR_STATE_DISCHARGE"; - chipset-state = "POWER_S0"; - /* Battery percent range (>= Empty, <= 10%) */ - batt-lvl = <0 10>; - - /* Amber 1 sec, off 3 sec */ - color-0 { - led-color = <&color_amber>; - period-ms = <1000>; - }; - color-1 { - led-color = <&color_off>; - period-ms = <3000>; - }; - }; - - power-state-error-s0 { - charge-state = "PWR_STATE_ERROR"; - chipset-state = "POWER_S0"; - /* Amber 1 sec, off 1 sec */ - color-0 { - led-color = <&color_amber>; - period-ms = <1000>; - }; - color-1 { - led-color = <&color_off>; - period-ms = <1000>; - }; - }; - - power-state-error-s3 { - charge-state = "PWR_STATE_ERROR"; - chipset-state = "POWER_S3"; - /* White 1 sec, off 3 sec */ - color-0 { - led-color = <&color_white>; - period-ms = <1000>; - }; - color-1 { - led-color = <&color_off>; - period-ms = <3000>; - }; - }; - - power-state-error-s5 { - charge-state = "PWR_STATE_ERROR"; - chipset-state = "POWER_S5"; - - color-0 { - led-color = <&color_off>; - }; - }; - }; -}; diff --git a/zephyr/projects/nissa/xivu/motionsense.dtsi b/zephyr/projects/nissa/xivu/motionsense.dtsi deleted file mode 100644 index 332252c4ef..0000000000 --- a/zephyr/projects/nissa/xivu/motionsense.dtsi +++ /dev/null @@ -1,156 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * Interrupt bindings for sensor devices. - */ - lsm6dso-int = &base_accel; - lis2dw12-int = &lid_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - lid_mutex: lid-mutex { - }; - - base_mutex: base-mutex { - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <0 1 0 - 1 0 0 - 0 0 (-1)>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <0 (-1) 0 - 1 0 0 - 0 0 1>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - lsm6dso_accel_data: lsm6dso-accel-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - lsm6dso_gyro_data: lsm6dso-gyro-drv-data { - compatible = "cros-ec,drvdata-lsm6dso"; - status = "okay"; - }; - - lis2dw12_data: lis2dw12-drv-data { - compatible = "cros-ec,drvdata-lis2dw12"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The nodelabel "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - * TODO(b/238139272): The first entries of the array must be - * accelerometers,then gyroscope. Fix this dependency in the DTS - * processing which makes the devicetree entries independent. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,lis2dw12"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&lis2dw12_data>; - i2c-spi-addr-flags = "LIS2DWL_ADDR0_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,lsm6dso-accel"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&lsm6dso_accel_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_gyro: base-gyro { - compatible = "cros-ec,lsm6dso-gyro"; - status = "okay"; - - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&base_mutex>; - port = <&i2c_ec_i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <(1000 | ROUND_UP_FLAG)>; /* dps */ - drv-data = <&lsm6dso_gyro_data>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&int_imu>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel>; - }; -}; diff --git a/zephyr/projects/nissa/xivu/overlay.dtsi b/zephyr/projects/nissa/xivu/overlay.dtsi deleted file mode 100644 index de45db75e7..0000000000 --- a/zephyr/projects/nissa/xivu/overlay.dtsi +++ /dev/null @@ -1,357 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - aliases { - gpio-cbi-wp = &gpio_ec_cbi_wp; - gpio-wp = &gpio_ec_wp_odl; - int-wp = &int_wp_l; - gpio-kbd-kso2 = &gpio_ec_kso_02_inv; - }; - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; - - batteries { - default_battery: smp_c31n2005 { - compatible = "smp,c31n2005", "battery-smart"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-irqs = < - &int_power_button - &int_lid_open - >; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_power_button: power_button { - irq-pin = <&gpio_gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_wp_l: wp_l { - irq-pin = <&gpio_ec_wp_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_lid_open: lid_open { - irq-pin = <&gpio_lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_tablet_mode: tablet_mode { - irq-pin = <&gpio_tablet_mode_l>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "gmr_tablet_switch_isr"; - }; - int_imu: ec_imu { - irq-pin = <&gpio_imu_int_l>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "lsm6dso_interrupt"; - }; - int_vol_down: vol_down { - irq-pin = <&gpio_voldn_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_vol_up: vol_up { - irq-pin = <&gpio_volup_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "button_interrupt"; - }; - int_usb_c0: usb_c0 { - irq-pin = <&gpio_usb_c0_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_interrupt"; - }; - int_usb_c1: usb_c1 { - irq-pin = <&gpio_sb_1>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_interrupt"; - }; - }; - - named-gpios { - gpio_sb_1: sb-1 { - gpios = <&gpio0 2 GPIO_PULL_UP>; - no-auto-init; - }; - - gpio_sb_2: sb-2 { - gpios = <&gpiod 4 GPIO_OUTPUT>; - no-auto-init; - }; - - /* - * Set I2C pins for type C sub-board to be low voltage (I2C5_1). - * We do this for all boards, since the pins are 3.3V tolerant, - * and the only 2 types of sub-boards used on nivviks both have - * type-C ports on them. - */ - gpio_sb_3: sb-3 { - gpios = <&gpiof 4 (GPIO_OPEN_DRAIN | GPIO_VOLTAGE_1P8)>; - no-auto-init; - }; - gpio_sb_4: sb-4 { - gpios = <&gpiof 5 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - no-auto-init; - }; - }; - - /* - * Aliases used for sub-board GPIOs. - */ - aliases { - /* - * Input GPIO when used with type-C port 1 - */ - gpio-usb-c1-int-odl = &gpio_sb_1; - gpio-en-rails-odl = &gpio_sb_1; - /* - * Sub-board with type A USB, enable. - */ - gpio-en-usb-a1-vbus = &gpio_sb_2; - /* - * Enable S5 rails for LTE sub-board - */ - gpio-en-sub-s5-rails = &gpio_sb_2; - }; - - temp_memory: memory { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_1>; - }; - temp_ambient: ambient { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_2>; - }; - temp_charger1: charger1 { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_3>; - }; - temp_charger2: charger2 { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_4>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - memory { - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - temp_host_release_halt = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_memory>; - }; - ambient { - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - temp_host_release_halt = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_ambient>; - }; - charger1 { - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - temp_host_release_halt = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_charger1>; - }; - charger2 { - temp_host_high = <85>; - temp_host_halt = <90>; - temp_host_release_high = <80>; - temp_host_release_halt = <80>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_charger2>; - }; - }; - - usba { - compatible = "cros-ec,usba-port-enable-pins"; - /* - * sb_2 is only configured as GPIO when USB-A1 is present, - * but it's still safe to control when disabled. - * - * ILIM_SEL pins are referred to by legacy enum name, - * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on - * sub-boards that don't have USB-A so is safe to control - * regardless of system configuration. - */ - enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>; - status = "okay"; - }; - - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - chg = <&chg_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_0>; - }; - }; - port0-muxes { - virtual_mux_0: virtual-mux-0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - /* - * TODO(b:211693800): port1 may not be present on some - * sub-boards. - */ - port1@1 { - compatible = "named-usbc-port"; - reg = <1>; - bc12 = <&bc12_port1>; - chg = <&chg_port1>; - usb-mux-chain-1 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_1 &anx7483_mux_1>; - }; - usb_mux_chain_1_no_mux: usb-mux-chain-1-no-mux { - compatible = "cros-ec,usb-mux-chain"; - alternative-chain; - usb-muxes = <&virtual_mux_1>; - }; - }; - port1-muxes { - virtual_mux_1: virtual-mux-1 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - }; - - unused-pins { - compatible = "unused-gpios"; - unused-gpios = - <&gpio8 5 0>, - <&gpio3 6 0>, - <&gpiod 7 0>, - <&gpio6 0 0>, - <&gpiof 2 0>, - <&gpiof 3 0>; - }; -}; - -&thermistor_3V3_51K1_47K_4050B { - status = "okay"; -}; - -&adc_ec_vsense_pp3300_s5 { - /* - * Voltage divider on input has 47k upper and 220k lower legs with - * 2714 mV full-scale reading on the ADC. Apply the largest possible - * multiplier (without overflowing int32) to get the best possible - * approximation of the actual ratio, but derate by a factor of two to - * ensure unexpectedly high values won't overflow. - */ - mul = <(791261 / 2)>; - div = <(651975 / 2)>; -}; - -/* Set bus speeds for I2C */ -&i2c0_0 { - label = "I2C_EEPROM"; - clock-frequency = <I2C_BITRATE_FAST>; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; -}; - -&i2c1_0 { - label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; -}; - -&i2c3_0 { - label = "I2C_USB_C0_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - /* - * BC1.2 interrupt is shared with TCPC, so - * IRQ is not specified here and handled by - * usb_c0_interrupt. - */ - }; - - chg_port0: isl923x@9 { - compatible = "intersil,isl923x"; - status = "okay"; - reg = <0x9>; - }; -}; - -&i2c5_1 { - label = "I2C_SUB_C1_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port1: isl923x@9 { - compatible = "intersil,isl923x"; - status = "okay"; - reg = <0x9>; - }; - - anx7483_mux_1: anx7483-mux-1@3e { - compatible = "analogix,anx7483"; - reg = <0x3e>; - board-set = "anx7483_set_default_tuning"; - }; -}; - -&i2c7_0 { - label = "I2C_BATTERY"; - clock-frequency = <I2C_BITRATE_STANDARD>; -}; - -&pwm6 { - status = "okay"; - pinctrl-0 = <&pwm6_gpc0>; - pinctrl-names = "default"; -}; - -/* host interface */ -&espi0 { - status = "okay"; - pinctrl-0 = <&espi_lpc_gp46_47_51_52_53_54_55_57>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/xivu/power_signals.dtsi b/zephyr/projects/nissa/xivu/power_signals.dtsi deleted file mode 100644 index 1d2b23069d..0000000000 --- a/zephyr/projects/nissa/xivu/power_signals.dtsi +++ /dev/null @@ -1,220 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - chosen { - intel-ap-pwrseq,espi = &espi0; - }; - - common-pwrseq { - compatible = "intel,ap-pwrseq"; - - sys-pwrok-delay = <10>; - all-sys-pwrgd-timeout = <20>; - }; - - pwr-en-pp5000-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP5000_S5 enable output to regulator"; - enum-name = "PWR_EN_PP5000_A"; - gpios = <&gpio4 0 0>; - output; - }; - pwr-en-pp3300-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP3300_S5 enable output to LS"; - enum-name = "PWR_EN_PP3300_A"; - gpios = <&gpiob 6 0>; - output; - }; - pwr-pg-ec-rsmrst-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST power good from regulator"; - enum-name = "PWR_RSMRST"; - gpios = <&gpio9 4 0>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-pch-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST output to PCH"; - enum-name = "PWR_EC_PCH_RSMRST"; - gpios = <&gpioa 6 0>; - output; - }; - pwr-slp-s0-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S0_L input from PCH"; - enum-name = "PWR_SLP_S0"; - gpios = <&gpio9 7 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-s3-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S3_L input from PCH"; - enum-name = "PWR_SLP_S3"; - gpios = <&gpioa 5 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-sus-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_SUS_L input from PCH"; - enum-name = "PWR_SLP_SUS"; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-soc-dsw-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "DSW_PWROK output to PCH"; - enum-name = "PWR_EC_SOC_DSW_PWROK"; - gpios = <&gpio6 1 0>; - output; - }; - pwr-vccst-pwrgd-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VCCST_PWRGD output to PCH"; - enum-name = "PWR_VCCST_PWRGD"; - gpios = <&gpioa 4 GPIO_OPEN_DRAIN>; - output; - }; - pwr-imvp9-vrrdy-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VRRDY input from IMVP9"; - enum-name = "PWR_IMVP9_VRRDY"; - gpios = <&gpio4 3 0>; - }; - pwr-pch-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PCH_PWROK output to PCH"; - enum-name = "PWR_PCH_PWROK"; - gpios = <&gpio7 2 GPIO_OPEN_DRAIN>; - output; - }; - pwr-ec-pch-sys-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_PWROK output to PCH"; - enum-name = "PWR_EC_PCH_SYS_PWROK"; - gpios = <&gpio3 7 0>; - output; - }; - pwr-sys-rst-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_RESET# output to PCH"; - enum-name = "PWR_SYS_RST"; - gpios = <&gpioc 5 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; - output; - }; - pwr-slp-s4 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S4 virtual wire input from PCH"; - enum-name = "PWR_SLP_S4"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; - vw-invert; - }; - pwr-slp-s5 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S5 virtual wire input from PCH"; - enum-name = "PWR_SLP_S5"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; - vw-invert; - }; - pwr-all-sys-pwrgd { - compatible = "intel,ap-pwrseq-external"; - dbg-label = "Combined all power good"; - enum-name = "PWR_ALL_SYS_PWRGD"; - }; - pwr-adc-pp3300 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP3300 PWROK (from ADC)"; - enum-name = "PWR_DSW_PWROK"; - trigger-high = <&cmp_pp3300_s5_high>; - trigger-low = <&cmp_pp3300_s5_low>; - }; - pwr-adc-pp1p05 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP1P05 PWROK (from ADC)"; - enum-name = "PWR_PG_PP1P05"; - trigger-high = <&cmp_pp1p05_high>; - trigger-low = <&cmp_pp1p05_low>; - }; - - adc-cmp { - cmp_pp3300_s5_high: pp3300_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* - * This is 90% of nominal voltage considering voltage - * divider on ADC input. - */ - threshold-mv = <2448>; - }; - cmp_pp3300_s5_low: pp3300_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 6>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <2448>; - }; - cmp_pp1p05_high: pp1p05_high { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_GREATER"; - /* Setting at 90% of nominal voltage */ - threshold-mv = <945>; - }; - cmp_pp1p05_low: pp1p05_low { - compatible = "nuvoton,adc-cmp"; - io-channels = <&adc0 4>; - comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; - threshold-mv = <945>; - }; - }; -}; - -/* - * Because the power signals directly reference the GPIOs, - * the correspinding named-gpios need to have no-auto-init set. - */ -&gpio_ec_soc_dsw_pwrok { - no-auto-init; -}; -&gpio_ec_soc_pch_pwrok_od { - no-auto-init; -}; -&gpio_ec_soc_rsmrst_l { - no-auto-init; -}; -&gpio_ec_soc_sys_pwrok { - no-auto-init; -}; -&gpio_ec_soc_vccst_pwrgd_od { - no-auto-init; -}; -&gpio_en_pp3300_s5 { - no-auto-init; -}; -&gpio_en_pp5000_s5 { - no-auto-init; -}; -&gpio_imvp91_vrrdy_od { - no-auto-init; -}; -&gpio_rsmrst_pwrgd_l { - no-auto-init; -}; -&gpio_slp_s0_l { - no-auto-init; -}; -&gpio_slp_s3_l { - no-auto-init; -}; -&gpio_slp_s4_l { - no-auto-init; -}; -&gpio_slp_sus_l { - no-auto-init; -}; -&gpio_sys_rst_odl { - no-auto-init; -}; diff --git a/zephyr/projects/nissa/xivu/project.conf b/zephyr/projects/nissa/xivu/project.conf deleted file mode 100644 index fe56a9d562..0000000000 --- a/zephyr/projects/nissa/xivu/project.conf +++ /dev/null @@ -1,17 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_BOARD_XIVU=y -CONFIG_PLATFORM_EC_OCPC=y -CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSO=y - -# LED -CONFIG_PLATFORM_EC_LED_COMMON=n -CONFIG_PLATFORM_EC_LED_DT=y - -# USBC -CONFIG_PLATFORM_EC_PD_MAX_POWER_MW=45000 - -# Battery -CONFIG_PLATFORM_EC_CHARGER_PROFILE_OVERRIDE=y diff --git a/zephyr/projects/nissa/xivu/project.overlay b/zephyr/projects/nissa/xivu/project.overlay deleted file mode 100644 index a7c5b7e9e7..0000000000 --- a/zephyr/projects/nissa/xivu/project.overlay +++ /dev/null @@ -1,15 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "../cbi.dtsi" - -#include "cbi.dtsi" -#include "generated.dtsi" -#include "keyboard.dtsi" -#include "led_pins.dtsi" -#include "led_policy.dtsi" -#include "motionsense.dtsi" -#include "overlay.dtsi" -#include "power_signals.dtsi" diff --git a/zephyr/projects/nissa/xivu/src/charger.c b/zephyr/projects/nissa/xivu/src/charger.c deleted file mode 100644 index 5021a55758..0000000000 --- a/zephyr/projects/nissa/xivu/src/charger.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "battery.h" -#include "charger.h" -#include "charger/isl923x_public.h" -#include "console.h" -#include "extpower.h" -#include "usb_pd.h" -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = raa489000_is_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -/* - * Xivu does not have a GPIO indicating whether extpower is present, - * so detect using the charger(s). - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present_p0 = 0; - int extpower_present_p1 = 0; - - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; - - if (pd_is_connected(0)) - extpower_present_p0 = extpower_is_present(); - else if (pd_is_connected(1)) - extpower_present_p1 = extpower_is_present(); - - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_acok_otg_c0), - extpower_present_p0); - gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_acok_otg_c1), - extpower_present_p1); -} - -__override void board_hibernate(void) -{ - /* Shut down the chargers */ - if (board_get_usb_pd_port_count() == 2) - raa489000_hibernate(CHARGER_SECONDARY, true); - raa489000_hibernate(CHARGER_PRIMARY, true); - LOG_INF("Charger(s) hibernated"); - cflush(); -} diff --git a/zephyr/projects/nissa/xivu/src/keyboard.c b/zephyr/projects/nissa/xivu/src/keyboard.c deleted file mode 100644 index ef799fb1d2..0000000000 --- a/zephyr/projects/nissa/xivu/src/keyboard.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "ec_commands.h" - -static const struct ec_response_keybd_config xivu_kb_legacy = { - .num_top_row_keys = 10, - .action_keys = { - TK_BACK, /* T1 */ - TK_REFRESH, /* T2 */ - TK_FULLSCREEN, /* T3 */ - TK_OVERVIEW, /* T4 */ - TK_SNAPSHOT, /* T5 */ - TK_BRIGHTNESS_DOWN, /* T6 */ - TK_BRIGHTNESS_UP, /* T7 */ - TK_VOL_MUTE, /* 8 */ - TK_VOL_DOWN, /* T9 */ - TK_VOL_UP, /* T10 */ - }, - .capabilities = KEYBD_CAP_SCRNLOCK_KEY, -}; - -__override const struct ec_response_keybd_config * -board_vivaldi_keybd_config(void) -{ - return &xivu_kb_legacy; -} diff --git a/zephyr/projects/nissa/xivu/src/usbc.c b/zephyr/projects/nissa/xivu/src/usbc.c deleted file mode 100644 index c4ba75f741..0000000000 --- a/zephyr/projects/nissa/xivu/src/usbc.c +++ /dev/null @@ -1,362 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "charge_state_v2.h" -#include "chipset.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" -#include "driver/charger/isl923x_public.h" -#include "driver/retimer/anx7483_public.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/raa489000.h" -#include "temp_sensor/temp_sensor.h" -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C0_TCPC, - .addr_flags = RAA489000_TCPC0_I2C_FLAGS, - }, - .drv = &raa489000_tcpm_drv, - /* RAA489000 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_VBUS_MONITOR, - }, - { /* sub-board */ - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C1_TCPC, - .addr_flags = RAA489000_TCPC0_I2C_FLAGS, - }, - .drv = &raa489000_tcpm_drv, - /* RAA489000 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_VBUS_MONITOR, - }, -}; - -int board_is_sourcing_vbus(int port) -{ - int regval; - - tcpc_read(port, TCPC_REG_POWER_STATUS, ®val); - return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS); -} - -int board_set_active_charge_port(int port) -{ - int is_real_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - int old_port; - - if (!is_real_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - old_port = charge_manager_get_active_charge_port(); - - LOG_INF("New chg p%d", port); - - /* Disable all ports. */ - if (port == CHARGE_PORT_NONE) { - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW); - raa489000_enable_asgate(i, false); - } - - return EC_SUCCESS; - } - - /* Check if port is sourcing VBUS. */ - if (board_is_sourcing_vbus(port)) { - LOG_WRN("Skip enable p%d", port); - return EC_ERROR_INVAL; - } - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - if (i == port) - continue; - - if (tcpc_write(i, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_LOW)) - LOG_WRN("p%d: sink path disable failed.", i); - raa489000_enable_asgate(i, false); - } - - /* - * Stop the charger IC from switching while changing ports. Otherwise, - * we can overcurrent the adapter we're switching to. (crbug.com/926056) - */ - if (old_port != CHARGE_PORT_NONE) - charger_discharge_on_ac(1); - - /* Enable requested charge port. */ - if (raa489000_enable_asgate(port, true) || - tcpc_write(port, TCPC_REG_COMMAND, - TCPC_REG_COMMAND_SNK_CTRL_HIGH)) { - LOG_WRN("p%d: sink path enable failed.", port); - charger_discharge_on_ac(0); - return EC_ERROR_UNKNOWN; - } - - /* Allow the charger IC to begin/continue switching. */ - charger_discharge_on_ac(0); - - return EC_SUCCESS; -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - int regval; - - /* - * The interrupt line is shared between the TCPC and BC1.2 detector IC. - * Therefore, go out and actually read the alert registers to report the - * alert status. - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl))) { - if (!tcpc_read16(0, TCPC_REG_ALERT, ®val)) { - /* The TCPCI Rev 1.0 spec says to ignore bits 14:12. */ - if (!(tcpc_config[0].flags & TCPC_FLAGS_TCPCI_REV2_0)) - regval &= ~((1 << 14) | (1 << 13) | (1 << 12)); - - if (regval) - status |= PD_STATUS_TCPC_ALERT_0; - } - } - - if (board_get_usb_pd_port_count() == 2 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - if (!tcpc_read16(1, TCPC_REG_ALERT, ®val)) { - /* TCPCI spec Rev 1.0 says to ignore bits 14:12. */ - if (!(tcpc_config[1].flags & TCPC_FLAGS_TCPCI_REV2_0)) - regval &= ~((1 << 14) | (1 << 13) | (1 << 12)); - - if (regval) - status |= PD_STATUS_TCPC_ALERT_1; - } - } - - return status; -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS */ - tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - if (port < 0 || port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return; - - raa489000_set_output_current(port, rp); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - if (port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return EC_ERROR_INVAL; - - /* Disable charging. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW); - if (rv) - return rv; - - /* Our policy is not to source VBUS when the AP is off. */ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - return EC_ERROR_NOT_POWERED; - - /* Provide Vbus. */ - rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH); - if (rv) - return rv; - - rv = raa489000_enable_asgate(port, true); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -void board_reset_pd_mcu(void) -{ - /* - * TODO(b:147316511): could send a reset command to the TCPC here - * if needed. - */ -} - -/* - * Because the TCPCs and BC1.2 chips share interrupt lines, it's possible - * for an interrupt to be lost if one asserts the IRQ, the other does the same - * then the first releases it: there will only be one falling edge to trigger - * the interrupt, and the line will be held low. We handle this by running a - * deferred check after a falling edge to see whether the IRQ is still being - * asserted. If it is, we assume an interrupt may have been lost and we need - * to poll each chip for events again. - */ -#define USBC_INT_POLL_DELAY_US 5000 - -static void poll_c0_int(void); -DECLARE_DEFERRED(poll_c0_int); -static void poll_c1_int(void); -DECLARE_DEFERRED(poll_c1_int); - -static void usbc_interrupt_trigger(int port) -{ - schedule_deferred_pd_interrupt(port); - usb_charger_task_set_event(port, USB_CHG_EVENT_BC12); -} - -static inline void poll_usb_gpio(int port, const struct gpio_dt_spec *gpio, - const struct deferred_data *ud) -{ - if (!gpio_pin_get_dt(gpio)) { - usbc_interrupt_trigger(port); - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); - } -} - -static void poll_c0_int(void) -{ - poll_usb_gpio(0, GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl), - &poll_c0_int_data); -} - -static void poll_c1_int(void) -{ - poll_usb_gpio(1, GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl), - &poll_c1_int_data); -} - -void usb_interrupt(enum gpio_signal signal) -{ - int port; - const struct deferred_data *ud; - - if (signal == GPIO_SIGNAL(DT_NODELABEL(gpio_usb_c0_int_odl))) { - port = 0; - ud = &poll_c0_int_data; - } else { - port = 1; - ud = &poll_c1_int_data; - } - /* - * We've just been called from a falling edge, so there's definitely - * no lost IRQ right now. Cancel any pending check. - */ - hook_call_deferred(ud, -1); - /* Trigger polling of TCPC and BC1.2 in respective tasks */ - usbc_interrupt_trigger(port); - /* Check for lost interrupts in a bit */ - hook_call_deferred(ud, USBC_INT_POLL_DELAY_US); -} - -__override void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_ma = (charge_ma * 90) / 100; - charge_set_input_current_limit( - MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT), charge_mv); -} - -struct chg_curr_step { - int on; - int off; - int curr_ma; -}; - -static const struct chg_curr_step chg_curr_table[] = { - { .on = 0, .off = 36, .curr_ma = 2800 }, - { .on = 46, .off = 36, .curr_ma = 1500 }, - { .on = 48, .off = 38, .curr_ma = 1000 }, -}; - -/* All charge current tables must have the same number of levels */ -#define NUM_CHG_CURRENT_LEVELS ARRAY_SIZE(chg_curr_table) - -int charger_profile_override(struct charge_state_data *curr) -{ - int rv; - int chg_temp_c; - int current; - int thermal_sensor0; - static int current_level; - static int prev_tmp; - - /* - * Precharge must be executed when communication is failed on - * dead battery. - */ - if (!(curr->batt.flags & BATT_FLAG_RESPONSIVE)) - return 0; - - current = curr->requested_current; - - rv = temp_sensor_read( - TEMP_SENSOR_ID_BY_DEV(DT_NODELABEL(temp_charger1)), - &thermal_sensor0); - chg_temp_c = K_TO_C(thermal_sensor0); - - if (rv != EC_SUCCESS) - return 0; - - if (chipset_in_state(CHIPSET_STATE_ON)) { - if (chg_temp_c < prev_tmp) { - if (chg_temp_c <= chg_curr_table[current_level].off) - current_level = current_level - 1; - } else if (chg_temp_c > prev_tmp) { - if (chg_temp_c >= chg_curr_table[current_level + 1].on) - current_level = current_level + 1; - } - /* - * Prevent level always minus 0 or over table steps. - */ - if (current_level < 0) - current_level = 0; - else if (current_level >= NUM_CHG_CURRENT_LEVELS) - current_level = NUM_CHG_CURRENT_LEVELS - 1; - - prev_tmp = chg_temp_c; - current = chg_curr_table[current_level].curr_ma; - - curr->requested_current = MIN(curr->requested_current, current); - } - return 0; -} - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} diff --git a/zephyr/projects/nissa/yaviks/cbi.dtsi b/zephyr/projects/nissa/yaviks/cbi.dtsi deleted file mode 100644 index c5716cbd37..0000000000 --- a/zephyr/projects/nissa/yaviks/cbi.dtsi +++ /dev/null @@ -1,99 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - /* Yaviks-specific fw_config fields. */ - nissa-fw-config { - /* - * FW_CONFIG field for multiple wi-fi SAR. - * - * start = <2>; - * size = <2>; - */ - - /* - * FW_CONFIG field to enable fan or not. - */ - fan { - enum-name = "FW_FAN"; - start = <4>; - size = <1>; - - no-fan { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FAN_NOT_PRESENT"; - value = <0>; - }; - fan-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FAN_PRESENT"; - value = <1>; - /* - * Set as default so that unprovisioned - * configs will run the fan regardless. - */ - default; - }; - }; - - /* - * FW_CONFIG field to indicate which keyboard layout - * should be used. - */ - keyboard { - enum-name = "FW_KB_LAYOUT"; - start = <5>; - size = <1>; - - layout-1 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_LAYOUT_DEFAULT"; - value = <0>; - default; - }; - layout-2 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_LAYOUT_US2"; - value = <1>; - }; - }; - - /* - * FW_CONFIG field to indicate which keyboard layout - * should be used. - */ - keyboard-backlight { - enum-name = "FW_KB_BACKLIGHT"; - start = <6>; - size = <1>; - - without-keyboard-backlight { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_BACKLIGHT_OFF"; - value = <1>; - }; - with-keyboard-backlight { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_KB_BACKLIGHT_ON"; - value = <0>; - default; - }; - }; - - /* - * FW_CONFIG field for multiple touch panel. - * - * start = <7>; - * size = <2>; - */ - - /* - * FW_CONFIG field for multiple storage. - * - * start = <31>; - * size = <1>; - */ - }; -}; diff --git a/zephyr/projects/nissa/yaviks/gpio.dtsi b/zephyr/projects/nissa/yaviks/gpio.dtsi deleted file mode 100644 index dae1d641cd..0000000000 --- a/zephyr/projects/nissa/yaviks/gpio.dtsi +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - - named-adc-channels { - compatible = "named-adc-channels"; - - adc_ec_vsense_pp1050_proc: ec_vsense_pp1050_proc { - enum-name = "ADC_PP1050_PROC"; - io-channels = <&adc0 14>; - }; - adc_ec_vsense_pp3300_s5: ec_vsense_pp3300_s5 { - enum-name = "ADC_PP3300_S5"; - io-channels = <&adc0 0>; - }; - adc_temp_sensor_1: temp_sensor_1 { - enum-name = "ADC_TEMP_SENSOR_1"; - io-channels = <&adc0 2>; - }; - adc_temp_sensor_2: temp_sensor_2 { - enum-name = "ADC_TEMP_SENSOR_2"; - io-channels = <&adc0 3>; - }; - adc_temp_sensor_3: temp_sensor_3 { - enum-name = "ADC_TEMP_SENSOR_3"; - io-channels = <&adc0 13>; - }; - }; - - named-gpios { - compatible = "named-gpios"; - - gpio_all_sys_pwrgd: all_sys_pwrgd { - gpios = <&gpiob 7 GPIO_INPUT>; - }; - gpio_ccd_mode_odl: ccd_mode_odl { - gpios = <&gpioh 5 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - }; - gpio_cpu_c10_gate_l: cpu_c10_gate_l { - gpios = <&gpiog 1 GPIO_INPUT>; - }; - gpio_ec_battery_pres_odl: ec_battery_pres_odl { - gpios = <&gpioi 4 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - }; - gpio_ec_cbi_wp: ec_cbi_wp { - gpios = <&gpioj 5 GPIO_OUTPUT>; - }; - gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - gpios = <&gpiok 4 GPIO_ODR_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - }; - gpio_ec_entering_rw: ec_entering_rw { - gpios = <&gpioc 7 GPIO_OUTPUT>; - enum-name = "GPIO_ENTERING_RW"; - }; - gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - gpios = <&gpioh 1 GPIO_OUTPUT>; - enum-name = "GPIO_PACKET_MODE_EN"; - }; - gpio_ec_pch_wake_odl: ec_pch_wake_odl { - gpios = <&gpiob 2 GPIO_ODR_LOW>; - }; - gpio_ec_prochot_odl: ec_prochot_odl { - gpios = <&gpioi 1 (GPIO_ODR_HIGH | GPIO_VOLTAGE_1P8)>; - }; - gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - gpios = <&gpiol 7 GPIO_OUTPUT>; - no-auto-init; - }; - gpio_ec_soc_int_odl: ec_soc_int_odl { - gpios = <&gpiod 5 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - }; - gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - gpios = <&gpiod 6 GPIO_ODR_HIGH>; - no-auto-init; - }; - gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - gpios = <&gpiob 6 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - }; - gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - gpios = <&gpioh 0 GPIO_OUTPUT>; - no-auto-init; - }; - gpio_ec_soc_rtcrst: ec_soc_rtcrst { - gpios = <&gpiok 2 GPIO_OUTPUT>; - }; - gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - gpios = <&gpiof 2 GPIO_OUTPUT>; - no-auto-init; - }; - gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - gpios = <&gpioe 5 GPIO_ODR_HIGH>; - no-auto-init; - }; - gpio_ec_wp_odl: ec_wp_odl { - gpios = <&gpioa 6 (GPIO_INPUT | GPIO_ACTIVE_LOW)>; - }; - gpio_en_pp3300_s5: en_pp3300_s5 { - gpios = <&gpioc 5 GPIO_OUTPUT>; - enum-name = "GPIO_TEMP_SENSOR_POWER"; - no-auto-init; - }; - gpio_en_pp5000_pen_x: en_pp5000_pen_x { - gpios = <&gpiob 5 GPIO_OUTPUT>; - }; - gpio_en_pp5000_s5: en_pp5000_s5 { - gpios = <&gpiok 5 GPIO_OUTPUT>; - no-auto-init; - }; - gpio_en_slp_z: en_slp_z { - gpios = <&gpiok 3 GPIO_OUTPUT>; - }; - gpio_en_usb_a0_vbus: en_usb_a0_vbus { - gpios = <&gpiol 6 GPIO_OUTPUT>; - }; - gpio_en_usb_c0_cc1_vconn: en_usb_c0_cc1_vconn { - gpios = <&gpioh 4 GPIO_OUTPUT>; - }; - gpio_en_usb_c0_cc2_vconn: en_usb_c0_cc2_vconn { - gpios = <&gpioh 6 GPIO_OUTPUT>; - }; - gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - gpios = <&gpioe 2 GPIO_INPUT_PULL_UP>; - enum-name = "GPIO_POWER_BUTTON_L"; - }; - gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - gpios = <&gpioj 4 GPIO_INPUT>; - no-auto-init; - }; - gpio_lid_open: lid_open { - gpios = <&gpiof 3 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - }; - gpio_pen_detect_odl: pen_detect_odl { - gpios = <&gpioj 1 GPIO_INPUT_PULL_UP>; - }; - gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - gpios = <&gpiod 3 GPIO_INPUT>; - }; - gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - gpios = <&gpioe 3 GPIO_INPUT>; - }; - gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - gpios = <&gpioe 1 GPIO_INPUT_PULL_UP>; - no-auto-init; - }; - gpio_slp_s0_l: slp_s0_l { - gpios = <&gpioe 4 GPIO_INPUT>; - no-auto-init; - }; - gpio_slp_s3_l: slp_s3_l { - gpios = <&gpioh 3 GPIO_INPUT>; - no-auto-init; - }; - gpio_slp_s4_l: slp_s4_l { - gpios = <&gpioi 5 GPIO_INPUT>; - }; - gpio_slp_sus_l: slp_sus_l { - gpios = <&gpiog 2 GPIO_INPUT>; - no-auto-init; - }; - gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - gpios = <&gpiof 1 GPIO_OUTPUT>; - enum-name = "GPIO_USB2_ILIM_SEL"; - }; - gpio_sys_rst_odl: sys_rst_odl { - gpios = <&gpiod 1 GPIO_ODR_HIGH>; - no-auto-init; - }; - gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - gpios = <&gpiol 5 GPIO_OUTPUT>; - enum-name = "GPIO_USB1_ILIM_SEL"; - }; - gpio_usb_c0_frs: usb_c0_frs { - gpios = <&gpioc 4 GPIO_OUTPUT>; - }; - gpio_usb_c0_int_odl: usb_c0_int_odl { - gpios = <&gpiok 0 GPIO_INPUT_PULL_UP>; - }; - gpio_vccin_aux_vid0: vccin_aux_vid0 { - gpios = <&gpiod 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - gpio_vccin_aux_vid1: vccin_aux_vid1 { - gpios = <&gpiok 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - }; - gpio_c1_charger_led_white_l: c1_charger_led_white_l { - gpios = <&gpiol 4 GPIO_OUTPUT_HIGH>; - }; - gpio_c1_charger_led_amber_l: c1_charger_led_amber_l { - gpios = <&gpiod 4 GPIO_OUTPUT_HIGH>; - }; - gpio_c0_charger_led_white_l: c0_charger_led_white_l { - gpios = <&gpioc 3 GPIO_OUTPUT_HIGH>; - }; - gpio_c0_charger_led_amber_l: c0_charger_led_amber_l { - gpios = <&gpioj 7 GPIO_OUTPUT_HIGH>; - }; - }; - - named-i2c-ports { - compatible = "named-i2c-ports"; - - i2c_ec_i2c_eeprom: ec_i2c_eeprom { - i2c-port = <&i2c0>; - enum-names = "I2C_PORT_EEPROM"; - }; - i2c_ec_i2c_batt: ec_i2c_batt { - i2c-port = <&i2c1>; - enum-names = "I2C_PORT_BATTERY"; - }; - i2c_ec_i2c_sensor: ec_i2c_sensor { - i2c-port = <&i2c2>; - enum-names = "I2C_PORT_SENSOR"; - }; - i2c_ec_i2c_sub_usb_c1: ec_i2c_sub_usb_c1 { - i2c-port = <&i2c4>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - }; - i2c_ec_i2c_usb_c0: ec_i2c_usb_c0 { - i2c-port = <&i2c5>; - enum-names = "I2C_PORT_USB_C0_TCPC"; - }; - }; -}; diff --git a/zephyr/projects/nissa/yaviks/keyboard.dtsi b/zephyr/projects/nissa/yaviks/keyboard.dtsi deleted file mode 100644 index 04a620767a..0000000000 --- a/zephyr/projects/nissa/yaviks/keyboard.dtsi +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - kblight { - compatible = "cros-ec,kblight-pwm"; - /* - * Use 324 Hz so that 32Khz clock source is used, - * which is not gated in power saving mode. - */ - pwms = <&pwm0 0 PWM_HZ(324) PWM_POLARITY_NORMAL>; - }; -}; - -&pwm0 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; - pinctrl-0 = <&pwm0_gpa0_default>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/yaviks/overlay.dtsi b/zephyr/projects/nissa/yaviks/overlay.dtsi deleted file mode 100644 index d768116444..0000000000 --- a/zephyr/projects/nissa/yaviks/overlay.dtsi +++ /dev/null @@ -1,402 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <cros/thermistor/thermistor.dtsi> - -/ { - aliases { - gpio-cbi-wp = &gpio_ec_cbi_wp; - gpio-wp = &gpio_ec_wp_odl; - int-wp = &int_wp_l; - /* - * USB-C: interrupt input. - * I2C pins are on i2c_ec_i2c_sub_usb_c1 - */ - gpio-usb-c1-int-odl = &gpio_sb_1; - /* - * USB-A: VBUS enable output - * LTE: power enable output - */ - gpio-en-usb-a1-vbus = &gpio_sb_2; - /* - * Enable S5 rails for LTE sub-board - */ - gpio-en-sub-s5-rails = &gpio_sb_2; - }; - - ec-console { - compatible = "ec-console"; - disabled = "events", "lpc", "hostcmd"; - }; - - batteries { - default_battery: cosmx { - compatible = "cosmx,gh02047xl", "battery-smart"; - }; - dynapack_atl_gh02047xl { - compatible = "dynapack,atl_gh02047xl", "battery-smart"; - }; - dynapack_cosmx_gh02047xl { - compatible = "dynapack,cosmx_gh02047xl", "battery-smart"; - }; - smp_coslight_gh02047xl { - compatible = "smp,coslight_gh02047xl", "battery-smart"; - }; - smp_highpower_gh02047xl { - compatible = "smp,highpower_gh02047xl", "battery-smart"; - }; - default_battery_3s:cosmx_si03058xl { - compatible = "cosmx,si03058xl", "battery-smart"; - }; - smp_highpower_si03058xl { - compatible = "smp,highpower_si03058xl", "battery-smart"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-irqs = < - &int_power_button - &int_lid_open - >; - }; - - gpio-interrupts { - compatible = "cros-ec,gpio-interrupts"; - - int_power_button: power_button { - irq-pin = <&gpio_gsc_ec_pwr_btn_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "power_button_interrupt"; - }; - int_wp_l: wp_l { - irq-pin = <&gpio_ec_wp_odl>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "switch_interrupt"; - }; - int_lid_open: lid_open { - irq-pin = <&gpio_lid_open>; - flags = <GPIO_INT_EDGE_BOTH>; - handler = "lid_interrupt"; - }; - int_usb_c0: usb_c0 { - irq-pin = <&gpio_usb_c0_int_odl>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_c0_interrupt"; - }; - int_usb_c1: usb_c1 { - irq-pin = <&gpio_sb_1>; - flags = <GPIO_INT_EDGE_FALLING>; - handler = "usb_c1_interrupt"; - }; - }; - - unused-pins { - compatible = "unused-gpios"; - unused-gpios = <&gpioa 7 0>, - <&gpioc 0 0>, - <&gpioc 6 0>, - <&gpiod 7 0>, - <&gpioh 2 0>, - <&gpioi 6 0>, - <&gpioi 7 0>, - <&gpioj 0 0>, - <&gpioj 3 0>, - <&gpiok 7 GPIO_OUTPUT>; - }; - - named-gpios { - /* - * EC doesn't take any specific action on CC/SBU disconnect due to - * fault, but this definition is useful for hardware testing. - */ - gpio_usb_c0_prot_fault_odl: usb_c0_prot_fault_odl { - gpios = <&gpiok 6 GPIO_INPUT_PULL_UP>; - }; - - gpio_sb_1: sb_1 { - gpios = <&gpioe 6 0>; - no-auto-init; - }; - gpio_sb_2: sb_2 { - gpios = <&gpiof 0 0>; - no-auto-init; - }; - gpio_fan_enable: fan-enable { - gpios = <&gpioa 1 GPIO_OUTPUT>; - no-auto-init; - }; - }; - - temp_cpu: cpu { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_1>; - }; - temp_5v_regulator: 5v_regulator { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_2>; - }; - temp_charger: charger { - compatible = "cros-ec,temp-sensor-thermistor"; - thermistor = <&thermistor_3V3_51K1_47K_4050B>; - adc = <&adc_temp_sensor_3>; - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - cpu { - temp_fan_off = <45>; - temp_fan_max = <60>; - temp_host_high = <75>; - temp_host_halt = <85>; - temp_host_release_high = <65>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_cpu>; - }; - 5v_regulator { - temp_fan_off = <50>; - temp_fan_max = <65>; - temp_host_high = <75>; - temp_host_halt = <85>; - temp_host_release_high = <65>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_5v_regulator>; - }; - charger { - temp_fan_off = <50>; - temp_fan_max = <65>; - temp_host_high = <80>; - temp_host_halt = <85>; - temp_host_release_high = <75>; - power-good-pin = <&gpio_ec_soc_dsw_pwrok>; - sensor = <&temp_charger>; - }; - }; - - usba { - compatible = "cros-ec,usba-port-enable-pins"; - /* - * sb_2 is only configured as GPIO when USB-A1 is present, - * but it's still safe to control when disabled. - * - * ILIM_SEL pins are referred to by legacy enum name, - * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on - * sub-boards that don't have USB-A so is safe to control - * regardless of system configuration. - */ - enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>; - status = "okay"; - }; - - usbc { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - compatible = "named-usbc-port"; - reg = <0>; - bc12 = <&bc12_port0>; - chg = <&chg_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_0>; - }; - }; - port0-muxes { - virtual_mux_0: virtual-mux-0 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - }; - port1@1 { - compatible = "named-usbc-port"; - reg = <1>; - bc12 = <&bc12_port1>; - chg = <&chg_port1>; - usb-mux-chain-1 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&virtual_mux_1 &tcpci_mux_1>; - }; - usb_mux_chain_1_no_mux: usb-mux-chain-1-no-mux { - compatible = "cros-ec,usb-mux-chain"; - alternative-chain; - usb-muxes = <&virtual_mux_1>; - }; - }; - port1-muxes { - virtual_mux_1: virtual-mux-1 { - compatible = "cros-ec,usbc-mux-virtual"; - }; - tcpci_mux_1: tcpci-mux-1 { - compatible = "parade,usbc-mux-ps8xxx"; - }; - }; - }; - - fans { - compatible = "cros-ec,fans"; - fan_0 { - pwms = <&pwm2 PWM_CHANNEL_2 PWM_KHZ(25) PWM_POLARITY_NORMAL>; - tach = <&tach1>; - rpm_min = <2600>; - rpm_start = <2600>; - rpm_max = <4100>; - enable_gpio = <&gpio_fan_enable>; - }; - }; -}; - -&thermistor_3V3_51K1_47K_4050B { - status = "okay"; -}; - -&adc_ec_vsense_pp3300_s5 { - /* - * Voltage divider on input has 47k upper and 220k lower legs with 3 V - * full-scale reading on the ADC. Apply the largest possible multiplier - * (without overflowing int32) to get the best possible approximation - * of the actual ratio, but derate by a factor of two to ensure - * unexpectedly high values won't overflow. - */ - mul = <(715828 / 2)>; - div = <(589820 / 2)>; -}; - -&adc0 { - pinctrl-0 = <&adc0_ch0_gpi0_default - &adc0_ch2_gpi2_default - &adc0_ch3_gpi3_default - &adc0_ch13_gpl0_default - &adc0_ch14_gpl1_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pinctrl { - i2c4_clk_gpe0_sleep: i2c4_clk_gpe0_sleep { - pinmuxs = <&pinctrle 0 IT8XXX2_ALT_DEFAULT>; - }; - i2c4_data_gpe7_sleep: i2c4_data_gpe7_sleep { - pinmuxs = <&pinctrle 7 IT8XXX2_ALT_DEFAULT>; - }; - i2c2_clk_gpf6_default: i2c2_clk_gpf6_default { - gpio-voltage = "1v8"; - }; - i2c2_data_gpf7_default: i2c2_data_gpf7_default { - gpio-voltage = "1v8"; - }; -}; - -&i2c0 { - label = "I2C_EEPROM"; - clock-frequency = <I2C_BITRATE_FAST>; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - label = "EEPROM_CBI"; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; - pinctrl-0 = <&i2c0_clk_gpb3_default - &i2c0_data_gpb4_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c1 { - label = "I2C_BATTERY"; - clock-frequency = <50000>; - pinctrl-0 = <&i2c1_clk_gpc1_default - &i2c1_data_gpc2_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c2 { - label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c2_clk_gpf6_default - &i2c2_data_gpf7_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c4 { - label = "I2C_SUB_C1_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c4_clk_gpe0_default - &i2c4_data_gpe7_default>; - pinctrl-1 = <&i2c4_clk_gpe0_sleep - &i2c4_data_gpe7_sleep>; - pinctrl-names = "default", "sleep"; - status = "okay"; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port1: sm5803@32 { - compatible = "siliconmitus,sm5803"; - status = "okay"; - reg = <0x32>; - }; -}; - -&i2c_ec_i2c_sub_usb_c1 { - /* - * Dynamic speed setting is used for AP-controlled firmware update - * of PS8745 TCPC/redriver: the AP lowers speed to 400 kHz in order - * to use more efficient window programming, then sets it back when - * done. - */ - dynamic-speed; -}; - -&i2c5 { - label = "I2C_USB_C0_TCPC"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c5_clk_gpa4_default - &i2c5_data_gpa5_default>; - pinctrl-names = "default"; - status = "okay"; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - }; - - chg_port0: sm5803@32 { - compatible = "siliconmitus,sm5803"; - status = "okay"; - reg = <0x32>; - }; -}; - -&usbpd0 { - status = "okay"; -}; - -/* pwm for fan */ -&pwm2 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C6>; - pinctrl-0 = <&pwm2_gpa2_default>; - pinctrl-names = "default"; -}; -/* fan tachometer sensor */ -&tach1 { - status = "okay"; - channel = <IT8XXX2_TACH_CHANNEL_A>; - pulses-per-round = <2>; - pinctrl-0 = <&tach1a_gpd7_default>; - pinctrl-names = "default"; -}; diff --git a/zephyr/projects/nissa/yaviks/power_signals.dtsi b/zephyr/projects/nissa/yaviks/power_signals.dtsi deleted file mode 100644 index d64ac83150..0000000000 --- a/zephyr/projects/nissa/yaviks/power_signals.dtsi +++ /dev/null @@ -1,180 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - chosen { - intel-ap-pwrseq,espi = &espi0; - }; - - common-pwrseq { - compatible = "intel,ap-pwrseq"; - - sys-pwrok-delay = <10>; - all-sys-pwrgd-timeout = <20>; - }; - - pwr-en-pp5000-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP5000_S5 enable output to regulator"; - enum-name = "PWR_EN_PP5000_A"; - gpios = <&gpiok 5 0>; - output; - }; - pwr-en-pp3300-s5 { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PP3300_S5 enable output to LS"; - enum-name = "PWR_EN_PP3300_A"; - gpios = <&gpioc 5 0>; - output; - }; - pwr-pg-ec-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST power good from regulator"; - enum-name = "PWR_RSMRST"; - gpios = <&gpioe 1 0>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-pch-rsmrst-odl { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "RSMRST output to PCH"; - enum-name = "PWR_EC_PCH_RSMRST"; - gpios = <&gpioh 0 0>; - output; - }; - pwr-slp-s0-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S0_L input from PCH"; - enum-name = "PWR_SLP_S0"; - gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-s3-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_S3_L input from PCH"; - enum-name = "PWR_SLP_S3"; - gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-slp-sus-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SLP_SUS_L input from PCH"; - enum-name = "PWR_SLP_SUS"; - gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; - interrupt-flags = <GPIO_INT_EDGE_BOTH>; - }; - pwr-ec-soc-dsw-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "DSW_PWROK output to PCH"; - enum-name = "PWR_EC_SOC_DSW_PWROK"; - gpios = <&gpiol 7 0>; - output; - }; - pwr-vccst-pwrgd-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VCCST_PWRGD output to PCH"; - enum-name = "PWR_VCCST_PWRGD"; - gpios = <&gpioe 5 (GPIO_OPEN_DRAIN | GPIO_VOLTAGE_1P8)>; - output; - }; - pwr-imvp9-vrrdy-od { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "VRRDY input from IMVP9"; - enum-name = "PWR_IMVP9_VRRDY"; - gpios = <&gpioj 4 0>; - }; - pwr-pch-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "PCH_PWROK output to PCH"; - enum-name = "PWR_PCH_PWROK"; - gpios = <&gpiod 6 GPIO_OPEN_DRAIN>; - output; - }; - pwr-ec-pch-sys-pwrok { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_PWROK output to PCH"; - enum-name = "PWR_EC_PCH_SYS_PWROK"; - gpios = <&gpiof 2 0>; - output; - }; - pwr-sys-rst-l { - compatible = "intel,ap-pwrseq-gpio"; - dbg-label = "SYS_RESET# output to PCH"; - enum-name = "PWR_SYS_RST"; - gpios = <&gpiod 1 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; - output; - }; - pwr-slp-s4 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S4 virtual wire input from PCH"; - enum-name = "PWR_SLP_S4"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; - vw-invert; - }; - pwr-slp-s5 { - compatible = "intel,ap-pwrseq-vw"; - dbg-label = "SLP_S5 virtual wire input from PCH"; - enum-name = "PWR_SLP_S5"; - virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; - vw-invert; - }; - pwr-all-sys-pwrgd { - /* - * This is a board level signal, since this - * signal needs some special processing. - */ - compatible = "intel,ap-pwrseq-external"; - dbg-label = "Combined all power good"; - enum-name = "PWR_ALL_SYS_PWRGD"; - }; - pwr-adc-pp3300 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP3300_PROC"; - enum-name = "PWR_DSW_PWROK"; - trigger-high = <&vcmp0>; - trigger-low = <&vcmp1>; - }; - pwr-adc-pp1p05 { - compatible = "intel,ap-pwrseq-adc"; - dbg-label = "PP1P05_PROC"; - enum-name = "PWR_PG_PP1P05"; - trigger-high = <&vcmp2>; - trigger-low = <&vcmp3>; - }; - -}; - -&vcmp0 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_GREATER>; - /* - * This is 90% of nominal voltage considering voltage - * divider on ADC input. - */ - threshold-mv = <2448>; - io-channels = <&adc0 0>; -}; -&vcmp1 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_LESS_OR_EQUAL>; - threshold-mv = <2448>; - io-channels = <&adc0 0>; -}; -&vcmp2 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_GREATER>; - /* Setting at 90% of nominal voltage */ - threshold-mv = <945>; - io-channels = <&adc0 14>; -}; -&vcmp3 { - status = "okay"; - scan-period = <IT8XXX2_VCMP_SCAN_PERIOD_600US>; - comparison = <IT8XXX2_VCMP_LESS_OR_EQUAL>; - threshold-mv = <945>; - io-channels = <&adc0 14>; -}; diff --git a/zephyr/projects/nissa/yaviks/project.conf b/zephyr/projects/nissa/yaviks/project.conf deleted file mode 100644 index 0e385b843e..0000000000 --- a/zephyr/projects/nissa/yaviks/project.conf +++ /dev/null @@ -1,33 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_BOARD_YAVIKS=y - -# Ensure recovery key combination (esc+refresh+power) is reliable: b/236580049 -CONFIG_PLATFORM_EC_KEYBOARD_PWRBTN_ASSERTS_KSI3=y -CONFIG_PLATFORM_EC_KEYBOARD_REFRESH_ROW3=y - -# Sensors: disabled; yaviks is clamshell-only -CONFIG_PLATFORM_EC_LID_ANGLE=n -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=n -CONFIG_PLATFORM_EC_MOTIONSENSE=n -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=n -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=n -CONFIG_PLATFORM_EC_ACCEL_FIFO=n -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=n -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=n -CONFIG_PLATFORM_EC_TABLET_MODE=n -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=n -CONFIG_PLATFORM_EC_VOLUME_BUTTONS=n -CONFIG_PLATFORM_EC_MAX_SENSOR_FREQ_MILLIHZ=100000 - -# Keyboard -CONFIG_PLATFORM_EC_KEYBOARD_KEYPAD=y -CONFIG_PLATFORM_EC_KBLIGHT_ENABLE_PIN=n - -# Fan -CONFIG_PLATFORM_EC_FAN=y - -# LED -CONFIG_PLATFORM_EC_LED_PWM=n diff --git a/zephyr/projects/nissa/yaviks/project.overlay b/zephyr/projects/nissa/yaviks/project.overlay deleted file mode 100644 index a7ce97a8b3..0000000000 --- a/zephyr/projects/nissa/yaviks/project.overlay +++ /dev/null @@ -1,12 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "../cbi.dtsi" - -#include "cbi.dtsi" -#include "gpio.dtsi" -#include "keyboard.dtsi" -#include "overlay.dtsi" -#include "power_signals.dtsi" diff --git a/zephyr/projects/nissa/yaviks/src/charger.c b/zephyr/projects/nissa/yaviks/src/charger.c deleted file mode 100644 index 9be2e685b0..0000000000 --- a/zephyr/projects/nissa/yaviks/src/charger.c +++ /dev/null @@ -1,74 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> - -#include "battery.h" -#include "charger.h" -#include "console.h" -#include "driver/charger/sm5803.h" -#include "extpower.h" -#include "usb_pd.h" -#include "nissa_common.h" -#include "battery_fuel_gauge.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = sm5803_is_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -/* - * Yaviks does not have a GPIO indicating whether extpower is present, - * so detect using the charger(s). - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; -} - -__override void board_hibernate(void) -{ - /* Shut down the chargers */ - if (board_get_usb_pd_port_count() == 2) - sm5803_hibernate(CHARGER_SECONDARY); - sm5803_hibernate(CHARGER_PRIMARY); - LOG_INF("Charger(s) hibernated"); - cflush(); -} - -__override int board_get_default_battery_type(void) -{ - int type = DEFAULT_BATTERY_TYPE; - int cells; - - if (charger_get_battery_cells(CHARGER_PRIMARY, &cells) == EC_SUCCESS) { - if (cells == 3) - type = DEFAULT_BATTERY_TYPE_3S; - if (cells != 2 && cells != 3) - LOG_ERR("Unexpected number of cells"); - } else { - LOG_ERR("Failed to get default battery type"); - } - - return type; -} diff --git a/zephyr/projects/nissa/yaviks/src/fan.c b/zephyr/projects/nissa/yaviks/src/fan.c deleted file mode 100644 index 23c3ec1143..0000000000 --- a/zephyr/projects/nissa/yaviks/src/fan.c +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -#include <zephyr/devicetree.h> -#include <zephyr/drivers/gpio.h> -#include <zephyr/logging/log.h> -#include "cros_cbi.h" -#include "fan.h" -#include "gpio/gpio.h" -#include "hooks.h" -#include "nissa_common.h" -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -static void fan_init(void) -{ - int ret; - uint32_t val; - /* - * Retrieve the fan config. - */ - ret = cros_cbi_get_fw_config(FW_FAN, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", FW_FAN); - return; - } - if (val != FW_FAN_PRESENT) { - /* Disable the fan */ - fan_set_count(0); - } else { - /* Configure the fan enable GPIO */ - gpio_pin_configure_dt(GPIO_DT_FROM_NODELABEL(gpio_fan_enable), - GPIO_OUTPUT); - } -} -DECLARE_HOOK(HOOK_INIT, fan_init, HOOK_PRIO_POST_FIRST); diff --git a/zephyr/projects/nissa/yaviks/src/keyboard.c b/zephyr/projects/nissa/yaviks/src/keyboard.c deleted file mode 100644 index 46d6083dbf..0000000000 --- a/zephyr/projects/nissa/yaviks/src/keyboard.c +++ /dev/null @@ -1,106 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -#include <zephyr/logging/log.h> - -#include "cros_cbi.h" -#include "ec_commands.h" -#include "hooks.h" -#include "keyboard_8042_sharedlib.h" -#include "keyboard_scan.h" -#include "timer.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - /* Increase from 50 us, because KSO_02 passes through the H1. */ - .output_settle_us = 80, - /* Other values should be the same as the default configuration. */ - .debounce_down_us = 9 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 3 * MSEC, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = 100 * MSEC, - .actual_key_mask = { - 0x1c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xa4, 0xff, 0xf6, 0x55, 0xfe, 0xff, 0xff, 0xff, /* full set */ - }, -}; - -static const struct ec_response_keybd_config yaviks_kb_w_kb_light = { - .num_top_row_keys = 13, - .action_keys = { - TK_BACK, /* T1 */ - TK_REFRESH, /* T2 */ - TK_FULLSCREEN, /* T3 */ - TK_OVERVIEW, /* T4 */ - TK_SNAPSHOT, /* T5 */ - TK_BRIGHTNESS_DOWN, /* T6 */ - TK_BRIGHTNESS_UP, /* T7 */ - TK_KBD_BKLIGHT_TOGGLE, /* T8 */ - TK_PLAY_PAUSE, /* T9 */ - TK_MICMUTE, /* T10 */ - TK_VOL_MUTE, /* T11 */ - TK_VOL_DOWN, /* T12 */ - TK_VOL_UP, /* T13 */ - }, - .capabilities = KEYBD_CAP_NUMERIC_KEYPAD, -}; - -static const struct ec_response_keybd_config yaviks_kb_wo_kb_light = { - .num_top_row_keys = 13, - .action_keys = { - TK_BACK, /* T1 */ - TK_REFRESH, /* T2 */ - TK_FULLSCREEN, /* T3 */ - TK_OVERVIEW, /* T4 */ - TK_SNAPSHOT, /* T5 */ - TK_BRIGHTNESS_DOWN, /* T6 */ - TK_BRIGHTNESS_UP, /* T7 */ - TK_PLAY_PAUSE, /* T8 */ - TK_MICMUTE, /* T9 */ - TK_VOL_MUTE, /* T10 */ - TK_VOL_DOWN, /* T11 */ - TK_VOL_UP, /* T12 */ - TK_MENU, /* T13 */ - }, - .capabilities = KEYBD_CAP_NUMERIC_KEYPAD, -}; - -__override const struct ec_response_keybd_config * -board_vivaldi_keybd_config(void) -{ - uint32_t val; - - cros_cbi_get_fw_config(FW_KB_BACKLIGHT, &val); - - if (val == FW_KB_BACKLIGHT_OFF) - return &yaviks_kb_wo_kb_light; - else - return &yaviks_kb_w_kb_light; -} - -/* - * Keyboard layout decided by FW config. - */ -static void kb_layout_init(void) -{ - int ret; - uint32_t val; - - ret = cros_cbi_get_fw_config(FW_KB_LAYOUT, &val); - if (ret != 0) { - LOG_ERR("Error retrieving CBI FW_CONFIG field %d", - FW_KB_LAYOUT); - return; - } - /* - * If keyboard is US2(FW_KB_LAYOUT_US2), we need translate right ctrl - * to backslash(\|) key. - */ - if (val == FW_KB_LAYOUT_US2) - set_scancode_set2(4, 0, get_scancode_set2(2, 7)); -} -DECLARE_HOOK(HOOK_INIT, kb_layout_init, HOOK_PRIO_POST_FIRST); diff --git a/zephyr/projects/nissa/yaviks/src/led.c b/zephyr/projects/nissa/yaviks/src/led.c deleted file mode 100644 index 88a476f1b0..0000000000 --- a/zephyr/projects/nissa/yaviks/src/led.c +++ /dev/null @@ -1,231 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <stdint.h> - -#include "battery.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "chipset.h" -#include "ec_commands.h" -#include "gpio.h" -#include "host_command.h" -#include "led_common.h" -#include "hooks.h" - -#define BAT_LED_ON 0 -#define BAT_LED_OFF 1 - -#define BATT_LOW_BCT 10 - -#define LED_TICKS_PER_CYCLE 4 -#define LED_TICKS_PER_CYCLE_S3 4 -#define LED_ON_TICKS 2 -#define POWER_LED_ON_S3_TICKS 2 - -const enum ec_led_id supported_led_ids[] = { EC_LED_ID_LEFT_LED, - EC_LED_ID_RIGHT_LED }; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -enum led_color { - LED_OFF = 0, - LED_AMBER, - LED_WHITE, - LED_COLOR_COUNT /* Number of colors, not a color itself */ -}; - -enum led_port { LEFT_PORT = 0, RIGHT_PORT }; - -static void led_set_color_battery(int port, enum led_color color) -{ - const struct gpio_dt_spec *amber_led, *white_led; - - if (port == LEFT_PORT) { - amber_led = GPIO_DT_FROM_NODELABEL(gpio_c0_charger_led_amber_l); - white_led = GPIO_DT_FROM_NODELABEL(gpio_c0_charger_led_white_l); - } else if (port == RIGHT_PORT) { - amber_led = GPIO_DT_FROM_NODELABEL(gpio_c1_charger_led_amber_l); - white_led = GPIO_DT_FROM_NODELABEL(gpio_c1_charger_led_white_l); - } - - switch (color) { - case LED_WHITE: - gpio_pin_set_dt(white_led, BAT_LED_ON); - gpio_pin_set_dt(amber_led, BAT_LED_OFF); - break; - case LED_AMBER: - gpio_pin_set_dt(white_led, BAT_LED_OFF); - gpio_pin_set_dt(amber_led, BAT_LED_ON); - break; - case LED_OFF: - gpio_pin_set_dt(white_led, BAT_LED_OFF); - gpio_pin_set_dt(amber_led, BAT_LED_OFF); - break; - default: - break; - } -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - switch (led_id) { - case EC_LED_ID_LEFT_LED: - brightness_range[EC_LED_COLOR_WHITE] = 1; - brightness_range[EC_LED_COLOR_AMBER] = 1; - break; - case EC_LED_ID_RIGHT_LED: - brightness_range[EC_LED_COLOR_WHITE] = 1; - brightness_range[EC_LED_COLOR_AMBER] = 1; - break; - default: - break; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - switch (led_id) { - case EC_LED_ID_LEFT_LED: - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_battery(LEFT_PORT, LED_WHITE); - else if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(LEFT_PORT, LED_AMBER); - else - led_set_color_battery(LEFT_PORT, LED_OFF); - break; - case EC_LED_ID_RIGHT_LED: - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_battery(RIGHT_PORT, LED_WHITE); - else if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(RIGHT_PORT, LED_AMBER); - else - led_set_color_battery(RIGHT_PORT, LED_OFF); - break; - default: - return EC_ERROR_PARAM1; - } - - return EC_SUCCESS; -} - -/* - * Set active charge port color to the parameter, turn off all others. - * If no port is active (-1), turn off all LEDs. - */ -static void set_active_port_color(enum led_color color) -{ - int port = charge_manager_get_active_charge_port(); - - if (led_auto_control_is_enabled(EC_LED_ID_RIGHT_LED)) - led_set_color_battery(RIGHT_PORT, - (port == RIGHT_PORT) ? color : LED_OFF); - if (led_auto_control_is_enabled(EC_LED_ID_LEFT_LED)) - led_set_color_battery(LEFT_PORT, - (port == LEFT_PORT) ? color : LED_OFF); -} - -static void led_set_battery(void) -{ - static unsigned int battery_ticks; - static int suspend_ticks; - - battery_ticks++; - - /* - * Override battery LEDs for Yaviks, Yaviks is non-power LED - * design, blinking both two side battery white LEDs to indicate - * system suspend with non-charging state. - */ - if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && - charge_get_state() != PWR_STATE_CHARGE) { - suspend_ticks++; - - led_set_color_battery(RIGHT_PORT, - suspend_ticks % LED_TICKS_PER_CYCLE_S3 < - POWER_LED_ON_S3_TICKS ? - LED_WHITE : - LED_OFF); - led_set_color_battery(LEFT_PORT, - suspend_ticks % LED_TICKS_PER_CYCLE_S3 < - POWER_LED_ON_S3_TICKS ? - LED_WHITE : - LED_OFF); - return; - } - - suspend_ticks = 0; - - switch (charge_get_state()) { - case PWR_STATE_CHARGE: - /* Always indicate when charging, even in suspend. */ - set_active_port_color(LED_AMBER); - break; - case PWR_STATE_DISCHARGE: - /* - * Blinking amber LEDs slowly if battery is lower 10 - * percentage. - */ - if (led_auto_control_is_enabled(EC_LED_ID_RIGHT_LED)) { - if (charge_get_percent() < BATT_LOW_BCT) - led_set_color_battery( - RIGHT_PORT, - (battery_ticks % LED_TICKS_PER_CYCLE < - LED_ON_TICKS) ? - LED_AMBER : - LED_OFF); - else - led_set_color_battery(RIGHT_PORT, LED_OFF); - } - - if (led_auto_control_is_enabled(EC_LED_ID_LEFT_LED)) { - if (charge_get_percent() < BATT_LOW_BCT) - led_set_color_battery( - LEFT_PORT, - (battery_ticks % LED_TICKS_PER_CYCLE < - LED_ON_TICKS) ? - LED_AMBER : - LED_OFF); - else - led_set_color_battery(LEFT_PORT, LED_OFF); - } - break; - case PWR_STATE_ERROR: - if (led_auto_control_is_enabled(EC_LED_ID_RIGHT_LED)) { - led_set_color_battery( - RIGHT_PORT, - (battery_ticks & 0x1) ? LED_AMBER : LED_OFF); - } - - if (led_auto_control_is_enabled(EC_LED_ID_LEFT_LED)) { - led_set_color_battery(LEFT_PORT, (battery_ticks & 0x1) ? - LED_AMBER : - LED_OFF); - } - break; - case PWR_STATE_CHARGE_NEAR_FULL: - set_active_port_color(LED_WHITE); - break; - case PWR_STATE_IDLE: /* External power connected in IDLE */ - set_active_port_color(LED_WHITE); - break; - case PWR_STATE_FORCED_IDLE: - set_active_port_color( - (battery_ticks % LED_TICKS_PER_CYCLE < LED_ON_TICKS) ? - LED_AMBER : - LED_OFF); - break; - default: - /* Other states don't alter LED behavior */ - break; - } -} - -/* Called by hook task every TICK(IT83xx 500ms) */ -static void led_tick(void) -{ - led_set_battery(); -} -DECLARE_HOOK(HOOK_TICK, led_tick, HOOK_PRIO_DEFAULT); diff --git a/zephyr/projects/nissa/yaviks/src/usbc.c b/zephyr/projects/nissa/yaviks/src/usbc.c deleted file mode 100644 index 48f7cfd9cb..0000000000 --- a/zephyr/projects/nissa/yaviks/src/usbc.c +++ /dev/null @@ -1,393 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <zephyr/logging/log.h> -#include <ap_power/ap_power.h> - -#include "charge_state_v2.h" -#include "chipset.h" -#include "hooks.h" -#include "usb_mux.h" -#include "system.h" -#include "driver/charger/sm5803.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/tcpm/ps8xxx_public.h" -#include "driver/tcpm/tcpci.h" - -#include "nissa_common.h" - -LOG_MODULE_DECLARE(nissa, CONFIG_NISSA_LOG_LEVEL); - -struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, - { - /* - * Sub-board: optional PS8745 TCPC+redriver. Behaves the same - * as PS8815. - */ - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C1_TCPC, - .addr_flags = PS8XXX_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - /* PS8745 implements TCPCI 2.0 */ - .flags = TCPC_FLAGS_TCPCI_REV2_0, - }, -}; - -/* Vconn control for integrated ITE TCPC */ -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ - /* Vconn control is only for port 0 */ - if (port) - return; - - if (cc_pin == USBPD_CC_PIN_1) - gpio_pin_set_dt( - GPIO_DT_FROM_NODELABEL(gpio_en_usb_c0_cc1_vconn), - !!enabled); - else - gpio_pin_set_dt( - GPIO_DT_FROM_NODELABEL(gpio_en_usb_c0_cc2_vconn), - !!enabled); -} - -__override bool pd_check_vbus_level(int port, enum vbus_level level) -{ - return sm5803_check_vbus_level(port, level); -} - -/* - * Putting chargers into LPM when in suspend reduces power draw by about 8mW - * per charger, but also seems critical to correct operation in source mode: - * if chargers are not in LPM when a sink is first connected, VBUS sourcing - * works even if the partner is later removed (causing LPM entry) and - * reconnected (causing LPM exit). If in LPM initially, sourcing VBUS - * consistently causes the charger to report (apparently spurious) overcurrent - * failures. - * - * In short, this is important to making things work correctly but we don't - * understand why. - */ -static void board_chargers_suspend(struct ap_power_ev_callback *const cb, - const struct ap_power_ev_data data) -{ - void (*fn)(int chgnum); - - switch (data.event) { - case AP_POWER_SUSPEND: - fn = sm5803_enable_low_power_mode; - break; - case AP_POWER_RESUME: - fn = sm5803_disable_low_power_mode; - break; - default: - LOG_WRN("%s: power event %d is not recognized", __func__, - data.event); - return; - } - - fn(CHARGER_PRIMARY); - if (board_get_charger_chip_count() > 1) - fn(CHARGER_SECONDARY); -} - -static int board_chargers_suspend_init(const struct device *unused) -{ - static struct ap_power_ev_callback cb = { - .handler = board_chargers_suspend, - .events = AP_POWER_SUSPEND | AP_POWER_RESUME, - }; - ap_power_ev_add_callback(&cb); - return 0; -} -SYS_INIT(board_chargers_suspend_init, APPLICATION, 0); - -int board_set_active_charge_port(int port) -{ - int is_real_port = (port >= 0 && port < board_get_usb_pd_port_count()); - int i; - int old_port; - int rv; - - if (!is_real_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - old_port = charge_manager_get_active_charge_port(); - LOG_INF("Charge update: p%d -> p%d", old_port, port); - - /* Check if port is sourcing VBUS. */ - if (port != CHARGE_PORT_NONE && charger_is_sourcing_otg_power(port)) { - LOG_WRN("Skip enable p%d: already sourcing", port); - return EC_ERROR_INVAL; - } - - /* Disable sinking on all ports except the desired one */ - for (i = 0; i < board_get_usb_pd_port_count(); i++) { - if (i == port) - continue; - - if (sm5803_vbus_sink_enable(i, 0)) - /* - * Do not early-return because this can fail during - * power-on which would put us into a loop. - */ - LOG_WRN("p%d: sink path disable failed.", i); - } - - /* Don't enable anything (stop here) if no ports were requested */ - if ((port == CHARGE_PORT_NONE) || (old_port == port)) - return EC_SUCCESS; - - /* - * Stop the charger IC from switching while changing ports. Otherwise, - * we can overcurrent the adapter we're switching to. (crbug.com/926056) - */ - if (old_port != CHARGE_PORT_NONE) - charger_discharge_on_ac(1); - - /* Enable requested charge port. */ - rv = sm5803_vbus_sink_enable(port, 1); - if (rv) - LOG_WRN("p%d: sink path enable failed: code %d", port, rv); - - /* Allow the charger IC to begin/continue switching. */ - charger_discharge_on_ac(0); - - return rv; -} - -uint16_t tcpc_get_alert_status(void) -{ - /* - * TCPC 0 is embedded in the EC and processes interrupts in the chip - * code (it83xx/intc.c). This function only needs to poll port C1 if - * present. - */ - uint16_t status = 0; - int regval; - - /* Is the C1 port present and its IRQ line asserted? */ - if (board_get_usb_pd_port_count() == 2 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - /* - * C1 IRQ is shared between BC1.2 and TCPC; poll TCPC to see if - * it asserted the IRQ. - */ - if (!tcpc_read16(1, TCPC_REG_ALERT, ®val)) { - if (regval) - status = PD_STATUS_TCPC_ALERT_1; - } - } - - return status; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - if (port < 0 || port >= board_get_usb_pd_port_count()) - return; - - prev_en = charger_is_sourcing_otg_power(port); - - /* Disable Vbus */ - charger_enable_otg_power(port, 0); - - /* Discharge Vbus if previously enabled */ - if (prev_en) - sm5803_set_vbus_disch(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - enum ec_error_list rv; - - if (port < 0 || port > board_get_usb_pd_port_count()) { - LOG_WRN("Port C%d does not exist, cannot enable VBUS", port); - return EC_ERROR_INVAL; - } - - /* Disable sinking */ - rv = sm5803_vbus_sink_enable(port, 0); - if (rv) { - LOG_WRN("C%d failed to disable sinking: %d", port, rv); - return rv; - } - - /* Disable Vbus discharge */ - rv = sm5803_set_vbus_disch(port, 0); - if (rv) { - LOG_WRN("C%d failed to clear VBUS discharge: %d", port, rv); - return rv; - } - - /* Provide Vbus */ - rv = charger_enable_otg_power(port, 1); - if (rv) { - LOG_WRN("C%d failed to enable VBUS sourcing: %d", port, rv); - return rv; - } - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - int rv; - const int current = rp == TYPEC_RP_3A0 ? 3000 : 1500; - - rv = charger_set_otg_current_voltage(port, current, 5000); - if (rv != EC_SUCCESS) { - LOG_WRN("Failed to set source ilimit on port %d to %d: %d", - port, current, rv); - } -} - -void board_reset_pd_mcu(void) -{ - /* - * Do nothing. The integrated TCPC for C0 lacks a dedicated reset - * command, and C1 (if present) doesn't have a reset pin connected - * to the EC. - */ -} - -#define INT_RECHECK_US 5000 - -/* C0 interrupt line shared by BC 1.2 and charger */ - -static void check_c0_line(void); -DECLARE_DEFERRED(check_c0_line); - -static void notify_c0_chips(void) -{ - usb_charger_task_set_event(0, USB_CHG_EVENT_BC12); - sm5803_interrupt(0); -} - -static void check_c0_line(void) -{ - /* - * If line is still being held low, see if there's more to process from - * one of the chips - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_usb_c0_int_odl))) { - notify_c0_chips(); - hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); - } -} - -void usb_c0_interrupt(enum gpio_signal s) -{ - /* Cancel any previous calls to check the interrupt line */ - hook_call_deferred(&check_c0_line_data, -1); - - /* Notify all chips using this line that an interrupt came in */ - notify_c0_chips(); - - /* Check the line again in 5ms */ - hook_call_deferred(&check_c0_line_data, INT_RECHECK_US); -} - -/* C1 interrupt line shared by BC 1.2, TCPC, and charger */ -static void check_c1_line(void); -DECLARE_DEFERRED(check_c1_line); - -static void notify_c1_chips(void) -{ - schedule_deferred_pd_interrupt(1); - usb_charger_task_set_event(1, USB_CHG_EVENT_BC12); - /* Charger is handled in board_process_pd_alert */ -} - -static void check_c1_line(void) -{ - /* - * If line is still being held low, see if there's more to process from - * one of the chips. - */ - if (!gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - notify_c1_chips(); - hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); - } -} - -void usb_c1_interrupt(enum gpio_signal s) -{ - /* Cancel any previous calls to check the interrupt line */ - hook_call_deferred(&check_c1_line_data, -1); - - /* Notify all chips using this line that an interrupt came in */ - notify_c1_chips(); - - /* Check the line again in 5ms */ - hook_call_deferred(&check_c1_line_data, INT_RECHECK_US); -} - -/* - * Check state of IRQ lines at startup, ensuring an IRQ that happened before - * the EC started up won't get lost (leaving the IRQ line asserted and blocking - * any further interrupts on the port). - * - * Although the PD task will check for pending TCPC interrupts on startup, - * the charger sharing the IRQ will not be polled automatically. - */ -void board_handle_initial_typec_irq(void) -{ - check_c0_line(); - if (board_get_usb_pd_port_count() == 2) - check_c1_line(); -} -/* - * This must run after sub-board detection (which happens in EC main()), - * but isn't depended on by anything else either. - */ -DECLARE_HOOK(HOOK_INIT, board_handle_initial_typec_irq, HOOK_PRIO_LAST); - -/* - * Handle charger interrupts in the PD task. Not doing so can lead to a priority - * inversion where we fail to respond to TCPC alerts quickly enough because we - * don't get another edge on a shared IRQ until the charger interrupt is cleared - * (or the IRQ is polled again), which happens in the low-priority charger task: - * the high-priority type-C handler is thus blocked on the lower-priority - * charger. - * - * To avoid that, we run charger interrupts at the same priority. - */ -void board_process_pd_alert(int port) -{ - /* - * Port 0 doesn't use an external TCPC, so its interrupts don't need - * this special handling. - */ - if (port == 1 && - !gpio_pin_get_dt(GPIO_DT_FROM_ALIAS(gpio_usb_c1_int_odl))) { - sm5803_handle_interrupt(port); - } -} - -int pd_snk_is_vbus_provided(int port) -{ - int chg_det = 0; - - sm5803_get_chg_det(port, &chg_det); - - return chg_det; -} diff --git a/zephyr/projects/nissa/yaviks/yaviks_vif.xml b/zephyr/projects/nissa/yaviks/yaviks_vif.xml deleted file mode 100644 index edc6299c58..0000000000 --- a/zephyr/projects/nissa/yaviks/yaviks_vif.xml +++ /dev/null @@ -1,350 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?>
-<vif:VIF xmlns:opt="http://usb.org/VendorInfoFileOptionalContent.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:vif="http://usb.org/VendorInfoFile.xsd">
- <vif:VIF_Specification>3.19</vif:VIF_Specification>
- <vif:VIF_App>
- <vif:Vendor>USB-IF</vif:Vendor>
- <vif:Name>VIF Editor</vif:Name>
- <vif:Version>3.2.4.0</vif:Version>
- </vif:VIF_App>
- <vif:Vendor_Name>Google</vif:Vendor_Name>
- <vif:Model_Part_Number>Yaviks</vif:Model_Part_Number>
- <vif:Product_Revision>1</vif:Product_Revision>
- <vif:TID>0</vif:TID>
- <vif:VIF_Product_Type value="0">Port Product</vif:VIF_Product_Type>
- <vif:Certification_Type value="1">Reference Platform</vif:Certification_Type>
- <vif:Product>
- <!--Product Level Content:-->
- </vif:Product>
- <vif:Component>
- <!--Component 0: Port 0-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Component-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Port_Label>0</vif:Port_Label>
- <vif:Connector_Type value="2">Type-C®</vif:Connector_Type>
- <vif:USB4_Supported value="false" />
- <vif:USB_PD_Support value="true" />
- <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type>
- <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine>
- <vif:Port_Battery_Powered value="true" />
- <vif:BC_1_2_Support value="2">Charging Port</vif:BC_1_2_Support>
- <vif:Captive_Cable value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;General PD-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Spec_Revision_Major value="3" />
- <vif:PD_Spec_Revision_Minor value="1" />
- <vif:PD_Spec_Version_Major value="1" />
- <vif:PD_Spec_Version_Minor value="3" />
- <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision>
- <vif:SOP_Capable value="true" />
- <vif:SOP_P_Capable value="true" />
- <vif:SOP_PP_Capable value="true" />
- <vif:SOP_P_Debug_Capable value="false" />
- <vif:SOP_PP_Debug_Capable value="false" />
- <vif:Manufacturer_Info_Supported_Port value="true" />
- <vif:Manufacturer_Info_VID_Port value="6353">18D1</vif:Manufacturer_Info_VID_Port>
- <vif:Manufacturer_Info_PID_Port value="20570">505A</vif:Manufacturer_Info_PID_Port>
- <vif:Chunking_Implemented_SOP value="true" />
- <vif:Unchunked_Extended_Messages_Supported value="false" />
- <vif:Security_Msgs_Supported_SOP value="false" />
- <vif:Unconstrained_Power value="false" />
- <vif:Num_Fixed_Batteries value="1" />
- <vif:Num_Swappable_Battery_Slots value="0" />
- <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Capabilities-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:USB_Comms_Capable value="true" />
- <vif:DR_Swap_To_DFP_Supported value="true" />
- <vif:DR_Swap_To_UFP_Supported value="false" />
- <vif:VCONN_Swap_To_On_Supported value="true" />
- <vif:VCONN_Swap_To_Off_Supported value="true" />
- <vif:Responds_To_Discov_SOP_UFP value="false" />
- <vif:Responds_To_Discov_SOP_DFP value="true" />
- <vif:Attempts_Discov_SOP value="true" />
- <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available>
- <vif:Data_Reset_Supported value="false" />
- <vif:Enter_USB_Supported value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Type-C®-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Type_C_Can_Act_As_Host value="true" />
- <vif:Type_C_Can_Act_As_Device value="false" />
- <vif:Type_C_Implements_Try_SRC value="true" />
- <vif:Type_C_Implements_Try_SNK value="false" />
- <vif:Type_C_Supports_Audio_Accessory value="false" />
- <vif:Type_C_Is_VCONN_Powered_Accessory value="false" />
- <vif:Type_C_Is_Debug_Target_SRC value="true" />
- <vif:Type_C_Is_Debug_Target_SNK value="true" />
- <vif:RP_Value value="1">1.5A</vif:RP_Value>
- <vif:Type_C_Port_On_Hub value="false" />
- <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source>
- <vif:Type_C_Sources_VCONN value="true" />
- <vif:Type_C_Is_Alt_Mode_Controller value="true" />
- <vif:Type_C_Is_Alt_Mode_Adapter value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Product Power-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW>
- <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Host-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Host_Supports_USB_Data value="true" />
- <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed>
- <vif:Host_Contains_Captive_Retimer value="false" />
- <vif:Host_Truncates_DP_For_tDHPResponse value="false" />
- <vif:Host_Is_Embedded value="false" />
- <vif:Host_Suspend_Supported value="true" />
- <vif:Is_DFP_On_Hub value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Battery Charging 1.2-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Source-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source>
- <vif:EPR_Supported_As_Src value="false" />
- <vif:USB_Suspend_May_Be_Cleared value="false" />
- <vif:Sends_Pings value="false" />
- <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink>
- <vif:Master_Port value="false" />
- <vif:Num_Src_PDOs value="1" />
- <vif:PD_OC_Protection value="true" />
- <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method>
- <!--Bundle: SrcPdoList-->
- <vif:SrcPdoList>
- <vif:SrcPDO>
- <!--Source PDO 1-->
- <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type>
- <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current>
- <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage>
- <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current>
- <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce>
- <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold>
- </vif:SrcPDO>
- </vif:SrcPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Sink-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Sink value="45000">45000 mW</vif:PD_Power_As_Sink>
- <vif:EPR_Supported_As_Snk value="false" />
- <vif:No_USB_Suspend_May_Be_Set value="true" />
- <vif:GiveBack_May_Be_Set value="false" />
- <vif:Higher_Capability_Set value="false" />
- <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source>
- <vif:Num_Snk_PDOs value="3" />
- <!--Bundle: SnkPdoList-->
- <vif:SnkPdoList>
- <vif:SnkPDO>
- <!--Sink PDO 1-->
- <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 2-->
- <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 3-->
- <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- </vif:SnkPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Dual Role-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Accepts_PR_Swap_As_Src value="true" />
- <vif:Accepts_PR_Swap_As_Snk value="true" />
- <vif:Requests_PR_Swap_As_Src value="true" />
- <vif:Requests_PR_Swap_As_Snk value="true" />
- <vif:FR_Swap_Supported_As_Initial_Sink value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;SOP Discover ID-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:XID_SOP value="0" />
- <vif:Data_Capable_As_USB_Host_SOP value="true" />
- <vif:Data_Capable_As_USB_Device_SOP value="false" />
- <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP>
- <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP>
- <vif:DFP_VDO_Port_Number value="0" />
- <vif:Modal_Operation_Supported_SOP value="false" />
- <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP>
- <vif:PID_SOP value="20570">505A</vif:PID_SOP>
- <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP>
- </vif:Component>
- <vif:Component>
- <!--Component 1: Port 1-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Component-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Port_Label>1</vif:Port_Label>
- <vif:Connector_Type value="2">Type-C®</vif:Connector_Type>
- <vif:USB4_Supported value="false" />
- <vif:USB_PD_Support value="true" />
- <vif:PD_Port_Type value="4">DRP</vif:PD_Port_Type>
- <vif:Type_C_State_Machine value="2">DRP</vif:Type_C_State_Machine>
- <vif:Port_Battery_Powered value="true" />
- <vif:BC_1_2_Support value="2">Charging Port</vif:BC_1_2_Support>
- <vif:Captive_Cable value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;General PD-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Spec_Revision_Major value="3" />
- <vif:PD_Spec_Revision_Minor value="1" />
- <vif:PD_Spec_Version_Major value="1" />
- <vif:PD_Spec_Version_Minor value="3" />
- <vif:PD_Specification_Revision value="2">Revision 3</vif:PD_Specification_Revision>
- <vif:SOP_Capable value="true" />
- <vif:SOP_P_Capable value="true" />
- <vif:SOP_PP_Capable value="true" />
- <vif:SOP_P_Debug_Capable value="false" />
- <vif:SOP_PP_Debug_Capable value="false" />
- <vif:Manufacturer_Info_Supported_Port value="true" />
- <vif:Manufacturer_Info_VID_Port value="6353">18D1</vif:Manufacturer_Info_VID_Port>
- <vif:Manufacturer_Info_PID_Port value="20570">505A</vif:Manufacturer_Info_PID_Port>
- <vif:Chunking_Implemented_SOP value="true" />
- <vif:Unchunked_Extended_Messages_Supported value="false" />
- <vif:Security_Msgs_Supported_SOP value="false" />
- <vif:Unconstrained_Power value="false" />
- <vif:Num_Fixed_Batteries value="1" />
- <vif:Num_Swappable_Battery_Slots value="0" />
- <vif:ID_Header_Connector_Type_SOP value="2">USB Type-C® Receptacle</vif:ID_Header_Connector_Type_SOP>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Capabilities-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:USB_Comms_Capable value="true" />
- <vif:DR_Swap_To_DFP_Supported value="true" />
- <vif:DR_Swap_To_UFP_Supported value="false" />
- <vif:VCONN_Swap_To_On_Supported value="true" />
- <vif:VCONN_Swap_To_Off_Supported value="true" />
- <vif:Responds_To_Discov_SOP_UFP value="false" />
- <vif:Responds_To_Discov_SOP_DFP value="true" />
- <vif:Attempts_Discov_SOP value="true" />
- <vif:Power_Interruption_Available value="0">No Interruption Possible</vif:Power_Interruption_Available>
- <vif:Data_Reset_Supported value="false" />
- <vif:Enter_USB_Supported value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Type-C®-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Type_C_Can_Act_As_Host value="true" />
- <vif:Type_C_Can_Act_As_Device value="false" />
- <vif:Type_C_Implements_Try_SRC value="true" />
- <vif:Type_C_Implements_Try_SNK value="false" />
- <vif:Type_C_Supports_Audio_Accessory value="false" />
- <vif:Type_C_Is_VCONN_Powered_Accessory value="false" />
- <vif:Type_C_Is_Debug_Target_SRC value="true" />
- <vif:Type_C_Is_Debug_Target_SNK value="true" />
- <vif:RP_Value value="1">1.5A</vif:RP_Value>
- <vif:Type_C_Port_On_Hub value="false" />
- <vif:Type_C_Power_Source value="2">Both</vif:Type_C_Power_Source>
- <vif:Type_C_Sources_VCONN value="true" />
- <vif:Type_C_Is_Alt_Mode_Controller value="true" />
- <vif:Type_C_Is_Alt_Mode_Adapter value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Product Power-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Product_Total_Source_Power_mW value="15000">15000 mW</vif:Product_Total_Source_Power_mW>
- <vif:Port_Source_Power_Type value="0">Assured</vif:Port_Source_Power_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;USB Host-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Host_Supports_USB_Data value="true" />
- <vif:Host_Speed value="1">USB 3.2 Gen 1x1</vif:Host_Speed>
- <vif:Host_Contains_Captive_Retimer value="true" />
- <vif:Host_Truncates_DP_For_tDHPResponse value="false" />
- <vif:Host_Is_Embedded value="false" />
- <vif:Host_Suspend_Supported value="true" />
- <vif:Is_DFP_On_Hub value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Battery Charging 1.2-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:BC_1_2_Charging_Port_Type value="1">CDP</vif:BC_1_2_Charging_Port_Type>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Source-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Source value="15000">15000 mW</vif:PD_Power_As_Source>
- <vif:EPR_Supported_As_Src value="false" />
- <vif:USB_Suspend_May_Be_Cleared value="false" />
- <vif:Sends_Pings value="false" />
- <vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="0">FR_Swap not supported</vif:FR_Swap_Type_C_Current_Capability_As_Initial_Sink>
- <vif:Master_Port value="false" />
- <vif:Num_Src_PDOs value="1" />
- <vif:PD_OC_Protection value="true" />
- <vif:PD_OCP_Method value="0">Over-Current Response</vif:PD_OCP_Method>
- <!--Bundle: SrcPdoList-->
- <vif:SrcPdoList>
- <vif:SrcPDO>
- <!--Source PDO 1-->
- <vif:Src_PDO_Supply_Type value="0">Fixed</vif:Src_PDO_Supply_Type>
- <vif:Src_PDO_Peak_Current value="0">100% IOC</vif:Src_PDO_Peak_Current>
- <vif:Src_PDO_Voltage value="100">5000 mV</vif:Src_PDO_Voltage>
- <vif:Src_PDO_Max_Current value="300">3000 mA</vif:Src_PDO_Max_Current>
- <vif:Src_PD_OCP_OC_Debounce value="0">0 msec</vif:Src_PD_OCP_OC_Debounce>
- <vif:Src_PD_OCP_OC_Threshold value="300">3000 mA</vif:Src_PD_OCP_OC_Threshold>
- </vif:SrcPDO>
- </vif:SrcPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;PD Sink-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:PD_Power_As_Sink value="45000">45000 mW</vif:PD_Power_As_Sink>
- <vif:EPR_Supported_As_Snk value="false" />
- <vif:No_USB_Suspend_May_Be_Set value="true" />
- <vif:GiveBack_May_Be_Set value="false" />
- <vif:Higher_Capability_Set value="false" />
- <vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source value="0">FR_Swap not supported</vif:FR_Swap_Reqd_Type_C_Current_As_Initial_Source>
- <vif:Num_Snk_PDOs value="3" />
- <!--Bundle: SnkPdoList-->
- <vif:SnkPdoList>
- <vif:SnkPDO>
- <!--Sink PDO 1-->
- <vif:Snk_PDO_Supply_Type value="0">Fixed</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Voltage value="100">5000 mV</vif:Snk_PDO_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 2-->
- <vif:Snk_PDO_Supply_Type value="1">Battery</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Op_Power value="60">15000 mW</vif:Snk_PDO_Op_Power>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- </vif:SnkPDO>
- <vif:SnkPDO>
- <!--Sink PDO 3-->
- <vif:Snk_PDO_Supply_Type value="2">Variable</vif:Snk_PDO_Supply_Type>
- <vif:Snk_PDO_Min_Voltage value="95">4750 mV</vif:Snk_PDO_Min_Voltage>
- <vif:Snk_PDO_Max_Voltage value="300">15000 mV</vif:Snk_PDO_Max_Voltage>
- <vif:Snk_PDO_Op_Current value="300">3000 mA</vif:Snk_PDO_Op_Current>
- </vif:SnkPDO>
- </vif:SnkPdoList>
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;Dual Role-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:Accepts_PR_Swap_As_Src value="true" />
- <vif:Accepts_PR_Swap_As_Snk value="true" />
- <vif:Requests_PR_Swap_As_Src value="true" />
- <vif:Requests_PR_Swap_As_Snk value="true" />
- <vif:FR_Swap_Supported_As_Initial_Sink value="false" />
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <!--;SOP Discover ID-->
- <!--;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-->
- <vif:XID_SOP value="0" />
- <vif:Data_Capable_As_USB_Host_SOP value="true" />
- <vif:Data_Capable_As_USB_Device_SOP value="false" />
- <vif:Product_Type_UFP_SOP value="0">Undefined</vif:Product_Type_UFP_SOP>
- <vif:Product_Type_DFP_SOP value="2">PDUSB Host</vif:Product_Type_DFP_SOP>
- <vif:DFP_VDO_Port_Number value="1" />
- <vif:Modal_Operation_Supported_SOP value="false" />
- <vif:USB_VID_SOP value="6353">18D1</vif:USB_VID_SOP>
- <vif:PID_SOP value="20570">505A</vif:PID_SOP>
- <vif:bcdDevice_SOP value="0">0000</vif:bcdDevice_SOP>
- </vif:Component>
-</vif:VIF>
\ No newline at end of file |