diff options
Diffstat (limited to 'zephyr/program/myst/src/power_signals.c')
| -rw-r--r-- | zephyr/program/myst/src/power_signals.c | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/zephyr/program/myst/src/power_signals.c b/zephyr/program/myst/src/power_signals.c new file mode 100644 index 0000000000..83b27cf87e --- /dev/null +++ b/zephyr/program/myst/src/power_signals.c @@ -0,0 +1,215 @@ +/* Copyright 2023 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include "ap_power/ap_power.h" +#include "charger.h" +#include "chipset.h" +#include "config.h" +#include "driver/amd_stb.h" +#include "gpio/gpio_int.h" +#include "gpio_signal.h" +#include "hooks.h" +#include "i2c.h" +#include "ioexpander.h" +#include "power.h" +#include "power/amd_x86.h" +#include "throttle_ap.h" +#include "timer.h" + +/* Power Signal Input List */ +/* TODO: b/218904113: Convert to using Zephyr GPIOs */ +const struct power_signal_info power_signal_list[] = { + [X86_SLP_S3_N] = { + .gpio = GPIO_PCH_SLP_S3_L, + .flags = POWER_SIGNAL_ACTIVE_HIGH, + .name = "SLP_S3_DEASSERTED", + }, + [X86_SLP_S5_N] = { + .gpio = GPIO_PCH_SLP_S5_L, + .flags = POWER_SIGNAL_ACTIVE_HIGH, + .name = "SLP_S5_DEASSERTED", + }, + [X86_S0_PGOOD] = { + .gpio = GPIO_S0_PGOOD, + .flags = POWER_SIGNAL_ACTIVE_HIGH, + .name = "S0_PGOOD", + }, +/* looks like we don't have this on Myst.. but POWER_SIGNAL_COUNT is needed */ + [X86_S5_PGOOD] = { + .gpio = GPIO_S5_PGOOD, + .flags = POWER_SIGNAL_ACTIVE_HIGH, + .name = "S5_PGOOD", + }, +}; +BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); + +static void handle_prochot(bool asserted, void *data); + +const struct prochot_cfg prochot_cfg = { + .gpio_prochot_in = GPIO_CPU_PROCHOT, + .callback = handle_prochot, +}; + +/* Chipset hooks */ +static void baseboard_suspend_change(struct ap_power_ev_callback *cb, + struct ap_power_ev_data data) +{ + switch (data.event) { + default: + return; + + case AP_POWER_SUSPEND: + /* Disable display backlight and retimer */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_disable_disp_bl), + 1); + break; + + case AP_POWER_RESUME: + /* Enable retimer and display backlight */ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_disable_disp_bl), + 0); + /* Any retimer tuning can be done after the retimer turns on */ + break; + } +} + +static void check_charger_prochot(void) +{ + print_charger_prochot(CHARGER_SOLO); +} +DECLARE_DEFERRED(check_charger_prochot); + +static void handle_prochot(bool asserted, void *data) +{ + if (asserted) { + ccprints("Prochot asserted externally"); + hook_call_deferred(&check_charger_prochot_data, 0); + } else + ccprints("Prochot deasserted externally"); +} + +static void baseboard_init(void) +{ + static struct ap_power_ev_callback cb; + + /* Setup a suspend/resume callback */ + ap_power_ev_init_callback(&cb, baseboard_suspend_change, + AP_POWER_RESUME | AP_POWER_SUSPEND); + ap_power_ev_add_callback(&cb); + /* Enable Power Group interrupts. */ + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_pg_groupc_s0)); + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_pg_lpddr_s3)); + + /* Enable thermtrip interrupt */ + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_soc_thermtrip)); + + /* Enable prochot interrupt */ + gpio_enable_dt_interrupt(GPIO_INT_FROM_NODELABEL(int_prochot)); + throttle_ap_config_prochot(&prochot_cfg); +} +DECLARE_HOOK(HOOK_INIT, baseboard_init, HOOK_PRIO_POST_I2C); + +/** + * b/275949288: On G3->S5, wait for RSMRST_L to be deasserted before asserting + * PCH_PWRBTN_L. This can be as long as ~65ms after cold boot. Then wait an + * additional delay of T1a defined in the EDS before changing the power button. + */ +#define RSMRST_WAIT_DELAY 65 +#define EDS_PWR_BTN_RSMRST_T1A_DELAY 16 +void board_pwrbtn_to_pch(int level) +{ + timestamp_t start; + + /* Add delay for G3 exit if asserting PWRBTN_L and RSMRST_L is low. */ + if (!level && + !gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_soc_rsmrst_l))) { + start = get_time(); + do { + usleep(500); + if (gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL( + gpio_ec_soc_rsmrst_l))) + break; + } while (time_since32(start) < (RSMRST_WAIT_DELAY * MSEC)); + + if (!gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_ec_soc_rsmrst_l))) + ccprints("Error pwrbtn: RSMRST_L still low"); + + msleep(EDS_PWR_BTN_RSMRST_T1A_DELAY); + } + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_mech_pwr_btn_odl), + level); +} + +/* Note: signal parameter unused */ +void baseboard_set_soc_pwr_pgood(enum gpio_signal unused) +{ + gpio_pin_set_dt(GPIO_DT_FROM_NODELABEL(gpio_ec_soc_pwr_good), + gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL( + gpio_pg_pcore_s0_r_od)) && + gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL( + gpio_pg_groupc_s0_od))); +} + +void baseboard_s0_pgood(enum gpio_signal signal) +{ + baseboard_set_soc_pwr_pgood(signal); + + /* Chain off power signal interrupt handler for PG_PCORE_S0_R_OD */ + power_signal_interrupt(signal); +} + +/* Note: signal parameter unused */ +void baseboard_set_en_pwr_pcore(enum gpio_signal unused) +{ + /* + * EC must AND signals PG_LPDDR5_S3_OD, PG_GROUPC_S0_OD, and + * EN_PWR_S0_R + */ + gpio_pin_set_dt( + GPIO_DT_FROM_NODELABEL(gpio_pg_pcore_s0_r_od), + gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_pg_lpddr5_s3_od)) && + gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_pg_groupc_s0_od)) && + gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_en_pwr_s0))); + + /* Update EC_SOC_PWR_GOOD based on our results */ + baseboard_set_soc_pwr_pgood(unused); +} + +void baseboard_en_pwr_s0(enum gpio_signal signal) +{ + /* EC must AND signals SLP_S3_L and PG_PWR_S5 */ + gpio_pin_set_dt( + GPIO_DT_FROM_NODELABEL(gpio_en_pwr_s0), + gpio_pin_get_dt(GPIO_DT_FROM_NODELABEL(gpio_slp_s3_l)) && + gpio_pin_get_dt( + GPIO_DT_FROM_NODELABEL(gpio_pg_pwr_s5))); + + /* Change EN_PWR_PCORE_S0_R if needed*/ + baseboard_set_en_pwr_pcore(signal); + + /* Now chain off to the normal power signal interrupt handler. */ + power_signal_interrupt(signal); +} + +void baseboard_s5_pgood(enum gpio_signal signal) +{ + /* Continue to our signal AND-ing and power interrupt */ + baseboard_en_pwr_s0(signal); +} + +void baseboard_set_en_pwr_s3(enum gpio_signal signal) +{ + /* Chain off the normal power signal interrupt handler */ + power_signal_interrupt(signal); +} + +void baseboard_soc_thermtrip(enum gpio_signal signal) +{ + ccprints("SoC thermtrip reported, shutting down"); + chipset_force_shutdown(CHIPSET_SHUTDOWN_THERMAL); +} |