diff options
Diffstat (limited to 'driver/mag_bmm150.c')
| -rw-r--r-- | driver/mag_bmm150.c | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/driver/mag_bmm150.c b/driver/mag_bmm150.c index 30555cbe56..ae1c736540 100644 --- a/driver/mag_bmm150.c +++ b/driver/mag_bmm150.c @@ -19,8 +19,8 @@ #ifdef CONFIG_MAG_BMI160_BMM150 #include "driver/accelgyro_bmi160.h" -#define raw_mag_read8__7bf bmi160_sec_raw_read8__7bf -#define raw_mag_write8__7bf bmi160_sec_raw_write8__7bf +#define raw_mag_read8 bmi160_sec_raw_read8 +#define raw_mag_write8 bmi160_sec_raw_write8 #else #error "Not implemented" #endif @@ -73,9 +73,9 @@ #define BMI150_READ_16BIT_COM_REG(store_, addr_) do { \ int val; \ - raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, (addr_), &val); \ + raw_mag_read8(s->port, s->i2c_spi_addr_flags, (addr_), &val); \ store_ = val; \ - raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, (addr_) + 1, &val); \ + raw_mag_read8(s->port, s->i2c_spi_addr_flags, (addr_) + 1, &val); \ store_ |= (val << 8); \ } while (0) @@ -88,11 +88,11 @@ int bmm150_init(const struct motion_sensor_t *s) struct mag_cal_t *moc = BMM150_CAL(s); /* Set the compass from Suspend to Sleep */ - ret = raw_mag_write8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = raw_mag_write8(s->port, s->i2c_spi_addr_flags, BMM150_PWR_CTRL, BMM150_PWR_ON); msleep(4); /* Now we can read the device id */ - ret = raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_CHIP_ID, &val); if (ret) return EC_ERROR_UNKNOWN; @@ -101,26 +101,26 @@ int bmm150_init(const struct motion_sensor_t *s) return EC_ERROR_ACCESS_DENIED; /* Read the private registers for compensation */ - ret = raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REGA_DIG_X1, &val); if (ret) return EC_ERROR_UNKNOWN; regs->dig1[X] = val; - raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REGA_DIG_Y1, &val); regs->dig1[Y] = val; - raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REGA_DIG_X2, &val); regs->dig2[X] = val; - raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REGA_DIG_Y2, &val); regs->dig2[Y] = val; - raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REGA_DIG_XY1, &val); regs->dig_xy1 = val; - raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REGA_DIG_XY2, &val); regs->dig_xy2 = val; @@ -132,18 +132,18 @@ int bmm150_init(const struct motion_sensor_t *s) /* Set the repetition in "Regular Preset" */ - raw_mag_write8__7bf(s->port, s->i2c_spi_addr__7bf, + raw_mag_write8(s->port, s->i2c_spi_addr_flags, BMM150_REPXY, BMM150_REP(SPECIAL, XY)); - raw_mag_write8__7bf(s->port, s->i2c_spi_addr__7bf, + raw_mag_write8(s->port, s->i2c_spi_addr_flags, BMM150_REPZ, BMM150_REP(SPECIAL, Z)); - ret = raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REPXY, &val); - ret = raw_mag_read8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = raw_mag_read8(s->port, s->i2c_spi_addr_flags, BMM150_REPZ, &val); /* * Set the compass forced mode, to sleep after each measure. */ - ret = raw_mag_write8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = raw_mag_write8(s->port, s->i2c_spi_addr_flags, BMM150_OP_CTRL, BMM150_OP_MODE_FORCED << BMM150_OP_MODE_OFFSET); |