diff options
Diffstat (limited to 'driver/accelgyro_lsm6dso.c')
| -rw-r--r-- | driver/accelgyro_lsm6dso.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/driver/accelgyro_lsm6dso.c b/driver/accelgyro_lsm6dso.c index f7d44e0e93..c9ad09f740 100644 --- a/driver/accelgyro_lsm6dso.c +++ b/driver/accelgyro_lsm6dso.c @@ -55,7 +55,7 @@ static int config_interrupt(const struct motion_sensor_t *s) #ifdef CONFIG_ACCEL_FIFO int int1_ctrl_val; - ret = st_raw_read8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_read8(s->port, s->i2c_spi_addr_flags, LSM6DSO_INT1_CTRL, &int1_ctrl_val); if (ret != EC_SUCCESS) return ret; @@ -67,7 +67,7 @@ static int config_interrupt(const struct motion_sensor_t *s) * number or samples still present in FIFO exceeds the configured * threshold. */ - ret = st_raw_write8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_write8(s->port, s->i2c_spi_addr_flags, LSM6DSO_FIFO_CTRL1_ADDR, 1); if (ret != EC_SUCCESS) return ret; @@ -75,7 +75,7 @@ static int config_interrupt(const struct motion_sensor_t *s) int1_ctrl_val |= LSM6DSO_INT_FIFO_TH | LSM6DSO_INT_FIFO_OVR | LSM6DSO_INT_FIFO_FULL; - ret = st_raw_write8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_write8(s->port, s->i2c_spi_addr_flags, LSM6DSO_INT1_CTRL, int1_ctrl_val); #endif /* CONFIG_ACCEL_FIFO */ @@ -89,7 +89,7 @@ static int config_interrupt(const struct motion_sensor_t *s) */ static int fifo_disable(const struct motion_sensor_t *s) { - return st_raw_write8__7bf(s->port, s->i2c_spi_addr__7bf, + return st_raw_write8(s->port, s->i2c_spi_addr_flags, LSM6DSO_FIFO_CTRL4_ADDR, LSM6DSO_FIFO_MODE_BYPASS_VAL); } @@ -102,7 +102,7 @@ static int fifo_disable(const struct motion_sensor_t *s) */ static int fifo_enable(const struct motion_sensor_t *s) { - return st_raw_write8__7bf(s->port, s->i2c_spi_addr__7bf, + return st_raw_write8(s->port, s->i2c_spi_addr_flags, LSM6DSO_FIFO_CTRL4_ADDR, LSM6DSO_FIFO_MODE_CONTINUOUS_VAL); } @@ -171,7 +171,7 @@ static inline int load_fifo(struct motion_sensor_t *s, fifo_len = fifo_depth * LSM6DSO_FIFO_SAMPLE_SIZE; while (read_len < fifo_len) { word_len = GENERIC_MIN(fifo_len - read_len, sizeof(fifo)); - err = st_raw_read_n_noinc__7bf(s->port, s->i2c_spi_addr__7bf, + err = st_raw_read_n_noinc(s->port, s->i2c_spi_addr_flags, LSM6DSO_FIFO_DATA_ADDR_TAG, fifo, word_len); if (err != EC_SUCCESS) @@ -247,7 +247,7 @@ static int irq_handler(struct motion_sensor_t *s, uint32_t *event) #ifdef CONFIG_ACCEL_FIFO /* Read how many data patterns on FIFO to read. */ - ret = st_raw_read_n_noinc__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_read_n_noinc(s->port, s->i2c_spi_addr_flags, LSM6DSO_FIFO_STS1_ADDR, (uint8_t *)&fsts, sizeof(fsts)); if (ret != EC_SUCCESS) @@ -369,7 +369,7 @@ static int is_data_ready(const struct motion_sensor_t *s, int *ready) { int ret, tmp; - ret = st_raw_read8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_read8(s->port, s->i2c_spi_addr_flags, LSM6DSO_STATUS_REG, &tmp); if (ret != EC_SUCCESS) { CPRINTS("%s type:0x%X RS Error", s->name, s->type); @@ -415,7 +415,7 @@ static int read(const struct motion_sensor_t *s, intv3_t v) xyz_reg = get_xyz_reg(s->type); /* Read data bytes starting at xyz_reg. */ - ret = st_raw_read_n_noinc__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_read_n_noinc(s->port, s->i2c_spi_addr_flags, xyz_reg, raw, OUT_XYZ_SIZE); if (ret != EC_SUCCESS) return ret; @@ -431,7 +431,7 @@ static int init(const struct motion_sensor_t *s) int ret = 0, tmp; struct stprivate_data *data = LSM6DSO_GET_DATA(s); - ret = st_raw_read8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_read8(s->port, s->i2c_spi_addr_flags, LSM6DSO_WHO_AM_I_REG, &tmp); if (ret != EC_SUCCESS) return EC_ERROR_UNKNOWN; @@ -450,7 +450,7 @@ static int init(const struct motion_sensor_t *s) mutex_lock(s->mutex); /* Software reset. */ - ret = st_raw_write8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_write8(s->port, s->i2c_spi_addr_flags, LSM6DSO_CTRL3_ADDR, LSM6DSO_SW_RESET); if (ret != EC_SUCCESS) goto err_unlock; @@ -459,7 +459,7 @@ static int init(const struct motion_sensor_t *s) * Output data not updated until have been read. * Prefer interrupt to be active low. */ - ret = st_raw_write8__7bf(s->port, s->i2c_spi_addr__7bf, + ret = st_raw_write8(s->port, s->i2c_spi_addr_flags, LSM6DSO_CTRL3_ADDR, LSM6DSO_BDU | LSM6DSO_IF_INC); if (ret != EC_SUCCESS) |