diff options
Diffstat (limited to 'chip/lm4/fan.c')
-rw-r--r-- | chip/lm4/fan.c | 172 |
1 files changed, 42 insertions, 130 deletions
diff --git a/chip/lm4/fan.c b/chip/lm4/fan.c index f584f69240..e8a77c3e91 100644 --- a/chip/lm4/fan.c +++ b/chip/lm4/fan.c @@ -3,12 +3,13 @@ * found in the LICENSE file. */ -/* PWM control module for Chromebook fans */ +/* Chrome OS fan control */ #include "clock.h" #include "common.h" #include "console.h" #include "fan.h" +#include "fan_chip.h" #include "gpio.h" #include "hooks.h" #include "host_command.h" @@ -19,119 +20,27 @@ #include "timer.h" #include "util.h" -/*****************************************************************************/ -/* Chip-specific stuff */ - -/* Maximum RPM for fan controller */ -#define MAX_RPM 0x1fff -/* Max PWM for fan controller */ -#define MAX_PWM 0x1ff -/* - * Scaling factor for requested/actual RPM for CPU fan. We need this because - * the fan controller on Blizzard filters tach pulses that are less than 64 - * 15625Hz ticks apart, which works out to ~7000rpm on an unscaled fan. By - * telling the controller we actually have twice as many edges per revolution, - * the controller can handle fans that actually go twice as fast. See - * crosbug.com/p/7718. - */ -#define CPU_FAN_SCALE 2 - -static int fan_get_enabled(void) -{ - return pwm_get_enabled(PWM_CH_FAN); -} +/* True if we're listening to the thermal control task. False if we're setting + * things manually. */ +static int thermal_control_enabled; static void fan_set_enabled(int enable) { - pwm_enable(PWM_CH_FAN, enable); + fan_chip_set_enabled(CONFIG_FAN_CH_CPU, enable); #ifdef CONFIG_FAN_EN_GPIO gpio_set_level(CONFIG_FAN_EN_GPIO, enable); -#endif /* CONFIG_FAN_EN_GPIO */ -} - -static int fan_get_rpm_mode(void) -{ - return (LM4_FAN_FANCH(CONFIG_FAN_CH_CPU) & 0x0001) ? 0 : 1; -} - -static void fan_set_rpm_mode(int rpm_mode) -{ - int was_enabled = fan_get_enabled(); - int was_rpm = fan_get_rpm_mode(); - - if (!was_rpm && rpm_mode) { - /* Enable RPM control */ - fan_set_enabled(0); - LM4_FAN_FANCH(CONFIG_FAN_CH_CPU) &= ~0x0001; - fan_set_enabled(was_enabled); - } else if (was_rpm && !rpm_mode) { - /* Disable RPM mode */ - fan_set_enabled(0); - LM4_FAN_FANCH(CONFIG_FAN_CH_CPU) |= 0x0001; - fan_set_enabled(was_enabled); - } -} - -static int fan_get_rpm_actual(void) -{ - return (LM4_FAN_FANCST(CONFIG_FAN_CH_CPU) & MAX_RPM) * CPU_FAN_SCALE; +#endif /* CONFIG_FAN_EN_GPIO */ } -static int fan_get_rpm_target(void) -{ - return (LM4_FAN_FANCMD(CONFIG_FAN_CH_CPU) & MAX_RPM) * CPU_FAN_SCALE; -} - -static void fan_set_rpm_target(int rpm) -{ - /* Apply fan scaling */ - if (rpm > 0) - rpm /= CPU_FAN_SCALE; - - /* Treat out-of-range requests as requests for maximum fan speed */ - if (rpm < 0 || rpm > MAX_RPM) - rpm = MAX_RPM; - - LM4_FAN_FANCMD(CONFIG_FAN_CH_CPU) = rpm; -} - -static int fan_get_status(void) -{ - return (LM4_FAN_FANSTS >> (2 * CONFIG_FAN_CH_CPU)) & 0x03; -} -static const char * const human_status[] = { - "not spinning", "changing", "locked", "frustrated" -}; - -/** - * Return non-zero if fan is enabled but stalled. - */ -static int fan_is_stalled(void) -{ - /* Must be enabled with non-zero target to stall */ - if (!fan_get_enabled() || fan_get_rpm_target() == 0) - return 0; - - /* Check for stall condition */ - return (((LM4_FAN_FANSTS >> (2 * CONFIG_FAN_CH_CPU)) & 0x03) == 0) ? - 1 : 0; -} - -/*****************************************************************************/ -/* Control functions */ - -/* True if we're listening to the thermal control task. False if we're setting - * things manually. */ -static int thermal_control_enabled; - static void fan_set_thermal_control_enabled(int enable) { thermal_control_enabled = enable; /* If controlling the fan, need it in RPM-control mode */ if (enable) - fan_set_rpm_mode(1); + fan_chip_channel_setup(CONFIG_FAN_CH_CPU, + FAN_CHIP_USE_RPM_MODE); } /* The thermal task will only call this function with pct in [0,100]. */ @@ -144,13 +53,13 @@ test_mockable void pwm_fan_set_percent_needed(int pct) rpm = pwm_fan_percent_to_rpm(pct); - fan_set_rpm_target(rpm); + fan_chip_set_rpm_target(CONFIG_FAN_CH_CPU, rpm); } static void fan_set_duty_cycle(int percent) { /* Move the fan to manual control */ - fan_set_rpm_mode(0); + fan_chip_set_rpm_mode(CONFIG_FAN_CH_CPU, 0); /* Always enable the fan */ fan_set_enabled(1); @@ -159,12 +68,7 @@ static void fan_set_duty_cycle(int percent) fan_set_thermal_control_enabled(0); /* Set the duty cycle */ - pwm_set_duty(PWM_CH_FAN, percent); -} - -static int fan_get_duty_cycle(void) -{ - return pwm_get_duty(PWM_CH_FAN); + fan_chip_set_duty(CONFIG_FAN_CH_CPU, percent); } /*****************************************************************************/ @@ -180,18 +84,26 @@ DECLARE_CONSOLE_COMMAND(fanauto, cc_fanauto, "Enable thermal fan control", NULL); - static int cc_faninfo(int argc, char **argv) { + static const char * const human_status[] = { + "not spinning", "changing", "locked", "frustrated" + }; int tmp; - ccprintf("Actual: %4d rpm\n", fan_get_rpm_actual()); - ccprintf("Target: %4d rpm\n", fan_get_rpm_target()); - ccprintf("Duty: %d%%\n", fan_get_duty_cycle()); - tmp = fan_get_status(); + + ccprintf("Actual: %4d rpm\n", + fan_chip_get_rpm_actual(CONFIG_FAN_CH_CPU)); + ccprintf("Target: %4d rpm\n", + fan_chip_get_rpm_target(CONFIG_FAN_CH_CPU)); + ccprintf("Duty: %d%%\n", + fan_chip_get_duty(CONFIG_FAN_CH_CPU)); + tmp = fan_chip_get_status(CONFIG_FAN_CH_CPU); ccprintf("Status: %d (%s)\n", tmp, human_status[tmp]); - ccprintf("Mode: %s\n", fan_get_rpm_mode() ? "rpm" : "duty"); + ccprintf("Mode: %s\n", + fan_chip_get_rpm_mode(CONFIG_FAN_CH_CPU) ? "rpm" : "duty"); ccprintf("Auto: %s\n", thermal_control_enabled ? "yes" : "no"); - ccprintf("Enable: %s\n", fan_get_enabled() ? "yes" : "no"); + ccprintf("Enable: %s\n", + fan_chip_get_enabled(CONFIG_FAN_CH_CPU) ? "yes" : "no"); #ifdef CONFIG_FAN_PGOOD_GPIO ccprintf("Power: %s\n", #ifdef CONFIG_FAN_EN_GPIO @@ -229,7 +141,7 @@ static int cc_fanset(int argc, char **argv) } /* Move the fan to automatic control */ - fan_set_rpm_mode(1); + fan_chip_set_rpm_mode(CONFIG_FAN_CH_CPU, 1); /* Always enable the fan */ fan_set_enabled(1); @@ -237,7 +149,7 @@ static int cc_fanset(int argc, char **argv) /* Disable thermal engine automatic fan control. */ fan_set_thermal_control_enabled(0); - fan_set_rpm_target(rpm); + fan_chip_set_rpm_target(CONFIG_FAN_CH_CPU, rpm); ccprintf("Setting fan rpm target to %d\n", rpm); @@ -277,7 +189,7 @@ static int hc_pwm_get_fan_target_rpm(struct host_cmd_handler_args *args) { struct ec_response_pwm_get_fan_rpm *r = args->response; - r->rpm = fan_get_rpm_target(); + r->rpm = fan_chip_get_rpm_target(CONFIG_FAN_CH_CPU); args->response_size = sizeof(*r); return EC_RES_SUCCESS; @@ -291,8 +203,8 @@ static int hc_pwm_set_fan_target_rpm(struct host_cmd_handler_args *args) const struct ec_params_pwm_set_fan_target_rpm *p = args->params; fan_set_thermal_control_enabled(0); - fan_set_rpm_mode(1); - fan_set_rpm_target(p->rpm); + fan_chip_set_rpm_mode(CONFIG_FAN_CH_CPU, 1); + fan_chip_set_rpm_target(CONFIG_FAN_CH_CPU, p->rpm); return EC_RES_SUCCESS; } @@ -346,11 +258,11 @@ static void pwm_fan_init(void) system_get_jump_tag(PWMFAN_SYSJUMP_TAG, &version, &size); if (prev && version == PWM_HOOK_VERSION && size == sizeof(*prev)) { /* Restore previous state. */ - fan_set_enabled(prev->fan_en); - fan_set_rpm_target(prev->fan_rpm); + fan_chip_set_enabled(CONFIG_FAN_CH_CPU, prev->fan_en); + fan_chip_set_rpm_target(CONFIG_FAN_CH_CPU, prev->fan_rpm); } else { /* Set initial fan speed to maximum */ - pwm_fan_set_percent_needed(100); + fan_chip_set_duty(CONFIG_FAN_CH_CPU, 100); } fan_set_thermal_control_enabled(1); @@ -366,7 +278,7 @@ static void pwm_fan_second(void) { uint16_t *mapped = (uint16_t *)host_get_memmap(EC_MEMMAP_FAN); - if (fan_is_stalled()) { + if (fan_chip_is_stalled(CONFIG_FAN_CH_CPU)) { mapped[0] = EC_FAN_SPEED_STALLED; /* * Issue warning. As we have thermal shutdown @@ -375,7 +287,7 @@ static void pwm_fan_second(void) host_set_single_event(EC_HOST_EVENT_THERMAL); cprintf(CC_PWM, "[%T Fan stalled!]\n"); } else { - mapped[0] = fan_get_rpm_actual(); + mapped[0] = fan_chip_get_rpm_actual(CONFIG_FAN_CH_CPU); } } DECLARE_HOOK(HOOK_SECOND, pwm_fan_second, HOOK_PRIO_DEFAULT); @@ -384,8 +296,8 @@ static void pwm_fan_preserve_state(void) { struct pwm_fan_state state; - state.fan_en = fan_get_enabled(); - state.fan_rpm = fan_get_rpm_target(); + state.fan_en = fan_chip_get_enabled(CONFIG_FAN_CH_CPU); + state.fan_rpm = fan_chip_get_rpm_target(CONFIG_FAN_CH_CPU); system_add_jump_tag(PWMFAN_SYSJUMP_TAG, PWM_HOOK_VERSION, sizeof(state), &state); @@ -394,7 +306,7 @@ DECLARE_HOOK(HOOK_SYSJUMP, pwm_fan_preserve_state, HOOK_PRIO_DEFAULT); static void pwm_fan_resume(void) { - fan_set_enabled(1); + fan_chip_set_enabled(CONFIG_FAN_CH_CPU, 1); } DECLARE_HOOK(HOOK_CHIPSET_RESUME, pwm_fan_resume, HOOK_PRIO_DEFAULT); @@ -405,8 +317,8 @@ static void pwm_fan_S3_S5(void) /* For now don't do anything with it. We'll have to turn it on again if * we need active cooling during heavy battery charging or something. */ - fan_set_rpm_target(0); - fan_set_enabled(0); /* crosbug.com/p/8097 */ + fan_chip_set_rpm_target(CONFIG_FAN_CH_CPU, 0); + fan_chip_set_enabled(CONFIG_FAN_CH_CPU, 0); /* crosbug.com/p/8097 */ } DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, pwm_fan_S3_S5, HOOK_PRIO_DEFAULT); DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, pwm_fan_S3_S5, HOOK_PRIO_DEFAULT); |