1 files changed, 146 insertions, 0 deletions
diff --git a/board/storo/board.h b/board/storo/board.h
new file mode 100644
index 0000000000..87525dd071
--- /dev/null
+++ b/board/storo/board.h
@@ -0,0 +1,146 @@
+/* Copyright 2021 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Storo board configuration */
+
+#ifndef __CROS_EC_BOARD_H
+#define __CROS_EC_BOARD_H
+
+/* Select Baseboard features */
+#define VARIANT_DEDEDE_EC_IT8320
+#include "baseboard.h"
+
+/* EC console commands */
+#define CONFIG_CMD_TCPC_DUMP
+#define CONFIG_CMD_CHARGER_DUMP
+
+/* Battery */
+#define CONFIG_BATTERY_FUEL_GAUGE
+
+/* BC 1.2 */
+#define CONFIG_BC12_DETECT_PI3USB9201
+
+/* Charger */
+#define CONFIG_CHARGER_RAA489000
+#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
+#define CONFIG_CHARGER_SENSE_RESISTOR 10
+#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */
+#define CONFIG_OCPC
+#undef  CONFIG_CHARGER_SINGLE_CHIP
+#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
+#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC)
+
+#define GPIO_USB_C1_INT_ODL GPIO_SUB_USB_C1_INT_ODL
+
+/* LED */
+#define CONFIG_LED_ONOFF_STATES
+#define CONFIG_LED_ONOFF_STATES_BAT_LOW	10
+
+#define I2C_PORT_ACCEL	I2C_PORT_SENSOR
+
+/* Sensors */
+#define CONFIG_CMD_ACCELS
+#define CONFIG_CMD_ACCEL_INFO
+
+#define CONFIG_ACCEL_BMA255		/* Lid accel */
+#define CONFIG_ACCEL_LIS2DWL
+#define CONFIG_ACCELGYRO_BMI160	/* Base accel */
+#define CONFIG_ACCELGYRO_ICM42607
+
+/* Lid operates in forced mode, base in FIFO */
+#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
+#define CONFIG_ACCEL_FIFO
+#define CONFIG_ACCEL_FIFO_SIZE 256	/* Must be a power of 2 */
+#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
+
+#define CONFIG_ACCEL_INTERRUPTS
+#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
+	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
+
+#define CONFIG_ACCELGYRO_ICM42607_INT_EVENT \
+	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
+
+#define CONFIG_LID_ANGLE
+#define CONFIG_LID_ANGLE_UPDATE
+#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
+#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
+
+#define CONFIG_TABLET_MODE
+#define CONFIG_TABLET_MODE_SWITCH
+#define CONFIG_GMR_TABLET_MODE
+
+/* TCPC */
+#define CONFIG_USB_PD_PORT_MAX_COUNT 2
+#define CONFIG_USB_PD_TCPM_RAA489000
+
+/* USB defines specific to external TCPCs */
+#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
+#define CONFIG_USB_PD_VBUS_DETECT_TCPC
+#define CONFIG_USB_PD_DISCHARGE_TCPC
+#define CONFIG_USB_PD_TCPC_LOW_POWER
+#define CONFIG_USB_PD_5V_EN_CUSTOM
+
+/* Thermistors */
+#define CONFIG_TEMP_SENSOR
+#define CONFIG_THERMISTOR
+#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
+#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A
+
+/* USB Mux and Retimer */
+#define CONFIG_USB_MUX_IT5205			/* C1: ITE Mux */
+#define I2C_PORT_USB_MUX I2C_PORT_USB_C0	/* Required for ITE Mux */
+
+#define CONFIG_USBC_RETIMER_TUSB544		/* C1 Redriver: TUSB544 */
+
+
+
+#ifndef __ASSEMBLER__
+
+#include "gpio_signal.h"
+#include "registers.h"
+
+enum chg_id {
+	CHARGER_PRIMARY,
+	CHARGER_SECONDARY,
+	CHARGER_NUM,
+};
+
+
+
+/* Motion sensors */
+enum sensor_id {
+	LID_ACCEL,
+	BASE_ACCEL,
+	BASE_GYRO,
+	SENSOR_COUNT
+};
+
+/* ADC channels */
+enum adc_channel {
+	ADC_VSNS_PP3300_A,     /* ADC0 */
+	ADC_TEMP_SENSOR_1,     /* ADC2 */
+	ADC_TEMP_SENSOR_2,     /* ADC3 */
+	ADC_TEMP_SENSOR_3,     /* ADC15*/
+	ADC_CH_COUNT
+};
+
+enum temp_sensor_id {
+	TEMP_SENSOR_1,
+	TEMP_SENSOR_2,
+	TEMP_SENSOR_3,
+	TEMP_SENSOR_COUNT
+};
+
+/* List of possible batteries */
+enum battery_type {
+	BATTERY_C21N2018,
+	BATTERY_TYPE_COUNT,
+};
+
+void motion_interrupt(enum gpio_signal signal);
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __CROS_EC_BOARD_H */