diff options
Diffstat (limited to 'board/poppy/board.c')
-rw-r--r-- | board/poppy/board.c | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/board/poppy/board.c b/board/poppy/board.c index 90e56b6fa8..a6125ff3c6 100644 --- a/board/poppy/board.c +++ b/board/poppy/board.c @@ -193,7 +193,7 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = { .bus_type = EC_BUS_TYPE_I2C, .i2c_info = { .port = NPCX_I2C_PORT0_0, - .addr__7bf = ANX74XX_I2C_ADDR1__7bf, + .addr_flags = ANX74XX_I2C_ADDR1_FLAGS, }, .drv = &anx74xx_tcpm_drv, }, @@ -201,7 +201,7 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = { .bus_type = EC_BUS_TYPE_I2C, .i2c_info = { .port = NPCX_I2C_PORT0_0, - .addr__7bf = PS8751_I2C_ADDR1__7bf, + .addr_flags = PS8751_I2C_ADDR1_FLAGS, }, .drv = &ps8xxx_tcpm_drv, }, @@ -291,7 +291,7 @@ void board_tcpc_init(void) * * NOTE: PS8751 A3 will wake on any I2C access. */ - i2c_read8__7bf(NPCX_I2C_PORT0_1, 0x08, 0xA0, ®); + i2c_read8(NPCX_I2C_PORT0_1, 0x08, 0xA0, ®); /* Enable TCPC interrupts */ gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); @@ -358,7 +358,7 @@ static void board_report_pmic_fault(const char *str) uint32_t info; /* RESETIRQ1 -- Bit 4: VRFAULT */ - if (i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x8, &vrfault) + if (i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, &vrfault) != EC_SUCCESS) return; @@ -368,19 +368,19 @@ static void board_report_pmic_fault(const char *str) /* VRFAULT has occurred, print VRFAULT status bits. */ /* PWRSTAT1 */ - i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x16, &pwrstat1); + i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, &pwrstat1); /* PWRSTAT2 */ - i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x17, &pwrstat2); + i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, &pwrstat2); CPRINTS("PMIC VRFAULT: %s", str); CPRINTS("PMIC VRFAULT: PWRSTAT1=0x%02x PWRSTAT2=0x%02x", pwrstat1, pwrstat2); /* Clear all faults -- Write 1 to clear. */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x8, BIT(4)); - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x16, pwrstat1); - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x17, pwrstat2); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, BIT(4)); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, pwrstat1); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, pwrstat2); /* * Status of the fault registers can be checked in the OS by looking at @@ -399,7 +399,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x30, 0x3a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x30, 0x3a); /* * V18ACNT: @@ -408,7 +408,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x34, 0x2a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x34, 0x2a); /* * V100ACNT: @@ -417,7 +417,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x37, 0x1a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x37, 0x1a); /* * V085ACNT: @@ -426,7 +426,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x38, 0x3a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x38, 0x3a); } static void board_pmic_enable_slp_s0_vr_decay(void) @@ -438,7 +438,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x30, 0x7a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x30, 0x7a); /* * V18ACNT: @@ -447,7 +447,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x34, 0x6a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x34, 0x6a); /* * V100ACNT: @@ -456,7 +456,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x37, 0x5a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x37, 0x5a); /* * V085ACNT: @@ -465,7 +465,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x38, 0x7a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x38, 0x7a); } void power_board_handle_host_sleep_event(enum host_sleep_event state) @@ -484,15 +484,15 @@ static void board_pmic_init(void) return; /* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x3e, 0x04); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3e, 0x04); board_pmic_disable_slp_s0_vr_decay(); /* VRMODECTRL - disable low-power mode for all rails */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x3b, 0x1f); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3b, 0x1f); /* Disable power button shutdown timer. */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x14, 0x00); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x14, 0x00); } DECLARE_DEFERRED(board_pmic_init); @@ -656,7 +656,7 @@ void board_hibernate(void) uart_flush_output(); /* Trigger PMIC shutdown. */ - if (i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, + if (i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x49, 0x01)) { /* * If we can't tell the PMIC to shutdown, instead reset @@ -751,7 +751,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_lid_mutex, .drv_data = &g_bmi160_data, .port = I2C_PORT_GYRO, - .i2c_spi_addr__7bf = BMI160_ADDR0__7bf, + .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, .rot_standard_ref = &lid_standard_ref, .default_range = 2, /* g, enough for laptop. */ .min_frequency = BMI160_ACCEL_MIN_FREQ, @@ -775,7 +775,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_lid_mutex, .drv_data = &g_bmi160_data, .port = I2C_PORT_GYRO, - .i2c_spi_addr__7bf = BMI160_ADDR0__7bf, + .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, .default_range = 1000, /* dps */ .rot_standard_ref = &lid_standard_ref, .min_frequency = BMI160_GYRO_MIN_FREQ, @@ -792,7 +792,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_lid_mutex, .drv_data = &g_bmi160_data, .port = I2C_PORT_GYRO, - .i2c_spi_addr__7bf = BMI160_ADDR0__7bf, + .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, .default_range = BIT(11), /* 16LSB / uT, fixed */ .rot_standard_ref = &mag_standard_ref, .min_frequency = BMM150_MAG_MIN_FREQ, @@ -807,7 +807,7 @@ struct motion_sensor_t motion_sensors[] = { .drv = &opt3001_drv, .drv_data = &g_opt3001_data, .port = I2C_PORT_ALS, - .i2c_spi_addr__7bf = OPT3001_I2C_ADDR__7bf, + .i2c_spi_addr_flags = OPT3001_I2C_ADDR_FLAGS, .rot_standard_ref = NULL, .default_range = 0x10000, /* scale = 1; uscale = 0 */ .min_frequency = OPT3001_LIGHT_MIN_FREQ, |