diff options
Diffstat (limited to 'board/osiris/gpio.inc')
| -rw-r--r-- | board/osiris/gpio.inc | 38 |
1 files changed, 7 insertions, 31 deletions
diff --git a/board/osiris/gpio.inc b/board/osiris/gpio.inc index e35ad8c723..cbb0ee78d3 100644 --- a/board/osiris/gpio.inc +++ b/board/osiris/gpio.inc @@ -31,9 +31,6 @@ GPIO_INT(USB_C0_RT_INT_ODL, PIN(B, 1), GPIO_INT_FALLING, retimer_in GPIO_INT(USB_C1_BC12_INT_ODL, PIN(5, 0), GPIO_INT_FALLING, bc12_interrupt) GPIO_INT(USB_C1_PPC_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, ppc_interrupt) GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(A, 2), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C2_BC12_INT_ODL, PIN(8, 3), GPIO_INT_FALLING, bc12_interrupt) -GPIO_INT(USB_C2_PPC_INT_ODL, PIN(7, 0), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C2_RT_INT_ODL, PIN(4, 1), GPIO_INT_FALLING, retimer_interrupt) /* USED GPIOs: */ GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_INPUT) @@ -119,14 +116,15 @@ ALTERNATE(PIN_MASK(0, 0x02), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW) / ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN1_L&GPID2/GPIOD2 */ /* Unused Pins */ -UNUSED(PIN(E, 1)) /* GPIOE1 */ UNUSED(PIN(D, 6)) /* GPOD6/CR_SOUT3/SHDF_ESPI_L */ UNUSED(PIN(3, 2)) /* GPO32/TRIS_L */ UNUSED(PIN(3, 4)) /* GPIO34 */ UNUSED(PIN(3, 5)) /* GPO35/CR_SOUT4/TEST_L */ UNUSED(PIN(6, 6)) /* GPIO66 */ UNUSED(PIN(5, 7)) /* GPIO57/SER_IRQ/ESPI_ALERT_L */ -UNUSED(PIN(D, 4)) /* GPIOD4 */ +UNUSED(PIN(8, 3)) /* GPIO83 */ +UNUSED(PIN(7, 0)) /* GPIO70 */ +UNUSED(PIN(4, 1)) /* GPIO41 */ /* Pre-configured PSL balls: J8 K6 */ @@ -138,30 +136,8 @@ UNUSED(PIN(D, 4)) /* GPIOD4 */ */ GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) -/* Board ID 1 IO expander configuration */ +GPIO(USB_C0_OC_ODL, PIN(D, 4), GPIO_ODR_HIGH) +GPIO(USB_C0_FRS_EN, PIN(6, 0), GPIO_LOW) +GPIO(USB_C0_RT_RST_ODL, PIN(C, 2), GPIO_ODR_LOW) -IOEX(ID_1_USB_C0_RT_RST_ODL, EXPIN(IOEX_ID_1_C0_NCT38XX, 0, 2), GPIO_ODR_LOW) -/* GPIO03_P1 to PU */ -IOEX(ID_1_USB_C0_FRS_EN, EXPIN(IOEX_ID_1_C0_NCT38XX, 0, 4), GPIO_LOW) -IOEX(ID_1_USB_C0_OC_ODL, EXPIN(IOEX_ID_1_C0_NCT38XX, 0, 6), GPIO_ODR_HIGH) -/* GPIO07_P1 to PU */ - -IOEX(ID_1_USB_C2_RT_RST_ODL, EXPIN(IOEX_ID_1_C2_NCT38XX, 0, 2), GPIO_ODR_LOW) -/* GPIO03_P2 to PU */ -IOEX(ID_1_USB_C2_FRS_EN, EXPIN(IOEX_ID_1_C2_NCT38XX, 0, 4), GPIO_LOW) -IOEX(ID_1_USB_C1_OC_ODL, EXPIN(IOEX_ID_1_C2_NCT38XX, 0, 6), GPIO_ODR_HIGH) -IOEX(ID_1_USB_C2_OC_ODL, EXPIN(IOEX_ID_1_C2_NCT38XX, 0, 7), GPIO_ODR_HIGH) - -/* Board ID 2 IO expander configuration */ - -/* GPIO02_P2 to PU */ -/* GPIO03_P2 to PU */ -IOEX(USB_C0_OC_ODL, EXPIN(IOEX_C0_NCT38XX, 0, 4), GPIO_ODR_HIGH) -IOEX(USB_C0_FRS_EN, EXPIN(IOEX_C0_NCT38XX, 0, 6), GPIO_OUT_LOW) -IOEX(USB_C0_RT_RST_ODL, EXPIN(IOEX_C0_NCT38XX, 0, 7), GPIO_ODR_LOW) - -IOEX(USB_C2_RT_RST_ODL, EXPIN(IOEX_C2_NCT38XX, 0, 2), GPIO_ODR_LOW) -IOEX(USB_C1_OC_ODL, EXPIN(IOEX_C2_NCT38XX, 0, 3), GPIO_ODR_HIGH) -IOEX(USB_C2_OC_ODL, EXPIN(IOEX_C2_NCT38XX, 0, 4), GPIO_ODR_HIGH) -IOEX(USB_C2_FRS_EN, EXPIN(IOEX_C2_NCT38XX, 0, 6), GPIO_OUT_LOW) -/* GPIO07_P2 to PU */ +GPIO(USB_C1_OC_ODL, PIN(E, 1), GPIO_ODR_HIGH)
\ No newline at end of file |