diff options
Diffstat (limited to 'board/mighty/board.c')
-rw-r--r-- | board/mighty/board.c | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/board/mighty/board.c b/board/mighty/board.c deleted file mode 100644 index a91a25c6a4..0000000000 --- a/board/mighty/board.c +++ /dev/null @@ -1,75 +0,0 @@ -/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -/* Veyron board-specific configuration */ - -#include "battery.h" -#include "chipset.h" -#include "common.h" -#include "extpower.h" -#include "gpio.h" -#include "i2c.h" -#include "keyboard_raw.h" -#include "lid_switch.h" -#include "power.h" -#include "power_button.h" -#include "power.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "registers.h" -#include "spi.h" -#include "task.h" -#include "util.h" -#include "timer.h" -#include "charger.h" - -#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP | GPIO_INT_BOTH) -#define GPIO_KB_OUTPUT GPIO_ODR_HIGH - -#include "gpio_list.h" - - -/* power signal list. Must match order of enum power_signal. */ -const struct power_signal_info power_signal_list[] = { - {GPIO_SOC_POWER_GOOD, 1, "POWER_GOOD"}, - {GPIO_SUSPEND_L, 1, "SUSPEND#_ASSERTED"}, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"master", I2C_PORT_MASTER, 100}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ -const struct pwm_t pwm_channels[] = { - {STM32_TIM(2), STM32_TIM_CH(3), - PWM_CONFIG_ACTIVE_LOW}, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -/** - * Discharge battery when on AC power for factory test. - */ -int board_discharge_on_ac(int enable) -{ - return charger_discharge_on_ac(enable); -} - -void board_config_pre_init(void) -{ - /* enable SYSCFG clock */ - STM32_RCC_APB2ENR |= 1 << 0; - - /* Remap USART DMA to match the USART driver */ - /* - * the DMA mapping is : - * Chan 2 : TIM1_CH1 - * Chan 3 : SPI1_TX - * Chan 4 : USART1_TX - * Chan 5 : USART1_RX - */ - STM32_SYSCFG_CFGR1 |= (1 << 9) | (1 << 10); /* Remap USART1 RX/TX DMA */ -} |