1 files changed, 2 insertions, 284 deletions

diff --git a/board/elm/usb_pd_policy.c b/board/elm/usb_pd_policy.c
index 766d38cc5c..5cfc60650e 100644
--- a/board/elm/usb_pd_policy.c
+++ b/board/elm/usb_pd_policy.c
@@ -24,32 +24,6 @@
 #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
 #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
 
-#define PDO_FIXED_FLAGS (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |\
-			 PDO_FIXED_COMM_CAP)
-
-/* TODO: fill in correct source and sink capabilities */
-const uint32_t pd_src_pdo[] = {
-		PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS),
-};
-const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo);
-
-const uint32_t pd_snk_pdo[] = {
-		PDO_FIXED(5000, 500, PDO_FIXED_FLAGS),
-		PDO_BATT(4750, 21000, 15000),
-		PDO_VAR(4750, 21000, 3000),
-};
-const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo);
-
-int pd_is_valid_input_voltage(int mv)
-{
-	return 1;
-}
-
-void pd_transition_voltage(int idx)
-{
-	/* No-operation: we are always 5V */
-}
-
 int pd_set_power_supply_ready(int port)
 {
 	/* Disable charging */
@@ -76,220 +50,15 @@ void pd_power_supply_reset(int port)
 	pd_send_host_event(PD_EVENT_POWER_CHANGE);
 }
 
-int pd_board_checks(void)
-{
-	return EC_SUCCESS;
-}
-
-int pd_check_power_swap(int port)
-{
-	/*
-	 * Allow power swap as long as we are acting as a dual role device,
-	 * otherwise assume our role is fixed (not in S0 or console command
-	 * to fix our role).
-	 */
-	return pd_get_dual_role(port) == PD_DRP_TOGGLE_ON ? 1 : 0;
-}
-
-int pd_check_data_swap(int port, int data_role)
-{
-	/* Allow data swap if we are a UFP, otherwise don't allow */
-	return (data_role == PD_ROLE_UFP) ? 1 : 0;
-}
-
 int pd_check_vconn_swap(int port)
 {
 	/* in G3, do not allow vconn swap since 5V power source is off */
 	return gpio_get_level(GPIO_5V_POWER_GOOD);
 }
 
-void pd_execute_data_swap(int port, int data_role)
-{
-	/* Do nothing */
-}
-
-void pd_check_pr_role(int port, int pr_role, int flags)
-{
-	/*
-	 * If partner is dual-role power and dualrole toggling is on, consider
-	 * if a power swap is necessary.
-	 */
-	if ((flags & PD_FLAGS_PARTNER_DR_POWER) &&
-	    pd_get_dual_role(port) == PD_DRP_TOGGLE_ON) {
-		/*
-		 * If we are a sink and partner is not externally powered, then
-		 * swap to become a source. If we are source and partner is
-		 * externally powered, swap to become a sink.
-		 */
-		int partner_extpower = flags & PD_FLAGS_PARTNER_EXTPOWER;
-
-		if ((!partner_extpower && pr_role == PD_ROLE_SINK) ||
-		    (partner_extpower && pr_role == PD_ROLE_SOURCE))
-			pd_request_power_swap(port);
-	}
-}
-
-void pd_check_dr_role(int port, int dr_role, int flags)
-{
-	/* If UFP, try to switch to DFP */
-	if ((flags & PD_FLAGS_PARTNER_DR_DATA) && dr_role == PD_ROLE_UFP)
-		pd_request_data_swap(port);
-}
-
 /* ----------------- Vendor Defined Messages ------------------ */
-const struct svdm_response svdm_rsp = {
-	.identity = NULL,
-	.svids = NULL,
-	.modes = NULL,
-};
-
-int pd_custom_vdm(int port, int cnt, uint32_t *payload,
-		  uint32_t **rpayload)
-{
-	int cmd = PD_VDO_CMD(payload[0]);
-	uint16_t dev_id = 0;
-	int is_rw, is_latest;
-
-	/* make sure we have some payload */
-	if (cnt == 0)
-		return 0;
-
-	switch (cmd) {
-	case VDO_CMD_VERSION:
-		/* guarantee last byte of payload is null character */
-		*(payload + cnt - 1) = 0;
-		CPRINTF("version: %s\n", (char *)(payload+1));
-		break;
-	case VDO_CMD_READ_INFO:
-	case VDO_CMD_SEND_INFO:
-		/* copy hash */
-		if (cnt == 7) {
-			dev_id = VDO_INFO_HW_DEV_ID(payload[6]);
-			is_rw = VDO_INFO_IS_RW(payload[6]);
-
-			is_latest = pd_dev_store_rw_hash(port,
-							 dev_id,
-							 payload + 1,
-							 is_rw ?
-							 SYSTEM_IMAGE_RW :
-							 SYSTEM_IMAGE_RO);
-
-			/*
-			 * Send update host event unless our RW hash is
-			 * already known to be the latest update RW.
-			 */
-			if (!is_rw || !is_latest)
-				pd_send_host_event(PD_EVENT_UPDATE_DEVICE);
-
-			CPRINTF("DevId:%d.%d SW:%d RW:%d\n",
-				HW_DEV_ID_MAJ(dev_id),
-				HW_DEV_ID_MIN(dev_id),
-				VDO_INFO_SW_DBG_VER(payload[6]),
-				is_rw);
-		} else if (cnt == 6) {
-			/* really old devices don't have last byte */
-			pd_dev_store_rw_hash(port, dev_id, payload + 1,
-					     SYSTEM_IMAGE_UNKNOWN);
-		}
-		break;
-	case VDO_CMD_CURRENT:
-		CPRINTF("Current: %dmA\n", payload[1]);
-		break;
-	case VDO_CMD_FLIP:
-		usb_mux_flip(port);
-		break;
-#ifdef CONFIG_USB_PD_LOGGING
-	case VDO_CMD_GET_LOG:
-		pd_log_recv_vdm(port, cnt, payload);
-		break;
-#endif /* CONFIG_USB_PD_LOGGING */
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_USB_PD_ALT_MODE_DFP
-static int dp_flags[CONFIG_USB_PD_PORT_COUNT];
-/* DP Status VDM as returned by UFP */
-static uint32_t dp_status[CONFIG_USB_PD_PORT_COUNT];
-
-static void svdm_safe_dp_mode(int port)
-{
-	const char *dp_str, *usb_str;
-	enum typec_mux typec_mux_setting;
-
-	/* make DP interface safe until configure */
-	dp_flags[port] = 0;
-	dp_status[port] = 0;
-
-	/*
-	 * Check current status, due to the mux may be switched to SS
-	 * and SS device was attached before (for example: Type-C dock).
-	 * To avoid broken the SS connection,
-	 * keep the current setting if SS connection is enabled already.
-	 */
-	typec_mux_setting = (usb_mux_get(port, &dp_str, &usb_str) && usb_str) ?
-			    TYPEC_MUX_USB : TYPEC_MUX_NONE;
-	usb_mux_set(port, typec_mux_setting,
-		    USB_SWITCH_CONNECT, pd_get_polarity(port));
-}
-
-static int svdm_enter_dp_mode(int port, uint32_t mode_caps)
-{
-	/* Only enter mode if device is DFP_D capable */
-	if (mode_caps & MODE_DP_SNK) {
-		svdm_safe_dp_mode(port);
-		return 0;
-	}
-
-	return -1;
-}
-
-static int svdm_dp_status(int port, uint32_t *payload)
-{
-	int opos = pd_alt_mode(port, USB_SID_DISPLAYPORT);
-
-	payload[0] = VDO(USB_SID_DISPLAYPORT, 1,
-			 CMD_DP_STATUS | VDO_OPOS(opos));
-	payload[1] = VDO_DP_STATUS(0, /* HPD IRQ  ... not applicable */
-				   0, /* HPD level ... not applicable */
-				   0, /* exit DP? ... no */
-				   0, /* usb mode? ... no */
-				   0, /* multi-function ... no */
-				   (!!(dp_flags[port] & DP_FLAGS_DP_ON)),
-				   0, /* power low? ... no */
-				   (!!(dp_flags[port] & DP_FLAGS_DP_ON)));
-	return 2;
-};
-
-static int svdm_dp_config(int port, uint32_t *payload)
-{
-	int opos = pd_alt_mode(port, USB_SID_DISPLAYPORT);
-	int mf_pref = PD_VDO_DPSTS_MF_PREF(dp_status[port]);
-	int pin_mode = pd_dfp_dp_get_pin_mode(port, dp_status[port]);
-
-	if (!pin_mode)
-		return 0;
-
-	usb_mux_set(port, mf_pref ? TYPEC_MUX_DOCK : TYPEC_MUX_DP,
-		    USB_SWITCH_CONNECT, pd_get_polarity(port));
-
-	payload[0] = VDO(USB_SID_DISPLAYPORT, 1,
-			 CMD_DP_CONFIG | VDO_OPOS(opos));
-	payload[1] = VDO_DP_CFG(pin_mode,      /* pin mode */
-				1,             /* DPv1.3 signaling */
-				2);            /* UFP connected */
-	return 2;
-};
-
-static void svdm_dp_post_config(int port)
-{
-	dp_flags[port] |= DP_FLAGS_DP_ON;
-	if (!(dp_flags[port] & DP_FLAGS_HPD_HI_PENDING))
-		return;
-}
-
-static int svdm_dp_attention(int port, uint32_t *payload)
+__override int svdm_dp_attention(int port, uint32_t *payload)
 {
 	int cur_lvl;
 	int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]);
@@ -316,60 +85,9 @@ static int svdm_dp_attention(int port, uint32_t *payload)
 	return ack;
 }
 
-static void svdm_exit_dp_mode(int port)
+__override void svdm_exit_dp_mode(int port)
 {
 	svdm_safe_dp_mode(port);
 	anx7688_hpd_disable(port);
 }
-
-static int svdm_enter_gfu_mode(int port, uint32_t mode_caps)
-{
-	/* Always enter GFU mode */
-	return 0;
-}
-
-static void svdm_exit_gfu_mode(int port)
-{
-}
-
-static int svdm_gfu_status(int port, uint32_t *payload)
-{
-	/*
-	 * This is called after enter mode is successful, send unstructured
-	 * VDM to read info.
-	 */
-	pd_send_vdm(port, USB_VID_GOOGLE, VDO_CMD_READ_INFO, NULL, 0);
-	return 0;
-}
-
-static int svdm_gfu_config(int port, uint32_t *payload)
-{
-	return 0;
-}
-
-static int svdm_gfu_attention(int port, uint32_t *payload)
-{
-	return 0;
-}
-
-const struct svdm_amode_fx supported_modes[] = {
-	{
-		.svid = USB_SID_DISPLAYPORT,
-		.enter = &svdm_enter_dp_mode,
-		.status = &svdm_dp_status,
-		.config = &svdm_dp_config,
-		.post_config = &svdm_dp_post_config,
-		.attention = &svdm_dp_attention,
-		.exit = &svdm_exit_dp_mode,
-	},
-	{
-		.svid = USB_VID_GOOGLE,
-		.enter = &svdm_enter_gfu_mode,
-		.status = &svdm_gfu_status,
-		.config = &svdm_gfu_config,
-		.attention = &svdm_gfu_attention,
-		.exit = &svdm_exit_gfu_mode,
-	}
-};
-const int supported_modes_cnt = ARRAY_SIZE(supported_modes);
 #endif /* CONFIG_USB_PD_ALT_MODE_DFP */