diff options
| -rw-r--r-- | board/jinlon/board.c | 17 | ||||
| -rw-r--r-- | board/jinlon/board.h | 5 | ||||
| -rw-r--r-- | board/jinlon/gpio.inc | 2 |
3 files changed, 23 insertions, 1 deletions
diff --git a/board/jinlon/board.c b/board/jinlon/board.c index 55faaae736..4df25350a9 100644 --- a/board/jinlon/board.c +++ b/board/jinlon/board.c @@ -120,6 +120,8 @@ const struct pwm_t pwm_channels[] = { [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 100 }, [PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN, .freq = 25000}, + [PWM_CH_FAN2] = {.channel = 6, .flags = PWM_CONFIG_OPEN_DRAIN, + .freq = 25000}, }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); @@ -275,6 +277,13 @@ const struct fan_conf fan_conf_0 = { .enable_gpio = GPIO_EN_PP5000_FAN, }; +const struct fan_conf fan_conf_1 = { + .flags = FAN_USE_RPM_MODE, + .ch = MFT_CH_1, /* Use MFT id to control fan */ + .pgood_gpio = -1, + .enable_gpio = -1, +}; + /* Default */ const struct fan_rpm fan_rpm_0 = { .rpm_min = 3100, @@ -282,14 +291,22 @@ const struct fan_rpm fan_rpm_0 = { .rpm_max = 6900, }; +const struct fan_rpm fan_rpm_1 = { + .rpm_min = 3100, + .rpm_start = 3100, + .rpm_max = 6900, +}; + const struct fan_t fans[FAN_CH_COUNT] = { [FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, }, + [FAN_CH_1] = { .conf = &fan_conf_1, .rpm = &fan_rpm_1, }, }; /******************************************************************************/ /* MFT channels. These are logically separate from pwm_channels. */ const struct mft_t mft_channels[] = { [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, + [MFT_CH_1] = {NPCX_MFT_MODULE_2, TCKC_LFCLK, PWM_CH_FAN2}, }; BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); diff --git a/board/jinlon/board.h b/board/jinlon/board.h index 9891173781..34200c41be 100644 --- a/board/jinlon/board.h +++ b/board/jinlon/board.h @@ -86,7 +86,7 @@ #define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL /* Fan features */ -#define CONFIG_FANS 1 +#define CONFIG_FANS 2 #undef CONFIG_FAN_INIT_SPEED #define CONFIG_FAN_INIT_SPEED 50 #define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_A_RAILS @@ -140,17 +140,20 @@ enum sensor_id { enum pwm_channel { PWM_CH_KBLIGHT, PWM_CH_FAN, + PWM_CH_FAN2, PWM_CH_COUNT }; enum fan_channel { FAN_CH_0 = 0, + FAN_CH_1, /* Number of FAN channels */ FAN_CH_COUNT, }; enum mft_channel { MFT_CH_0 = 0, + MFT_CH_1, /* Number of MFT channels */ MFT_CH_COUNT, }; diff --git a/board/jinlon/gpio.inc b/board/jinlon/gpio.inc index 7f14dc575d..81f96d437a 100644 --- a/board/jinlon/gpio.inc +++ b/board/jinlon/gpio.inc @@ -121,7 +121,9 @@ ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UA /* PWM */ ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* PWM3 - Keyboard backlight */ ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* PWM5 - FAN */ +ALTERNATE(PIN_MASK(C, 0x01), 0, MODULE_PWM, 0) /* PWM6 - FAN2 */ ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* TA1 - Fan Tachometer */ +ALTERNATE(PIN_MASK(7, 0x08), 0, MODULE_PWM, 0) /* TA2 - Fan Tachometer */ /* ADC */ ALTERNATE(PIN_MASK(4, 0x38), 0, MODULE_ADC, 0) /* ADC0-2*/ |