STM32: Support LPUART console

This patch adds support for console on LPUART (low power UART).
It is wired to the USB type B port on the board, which is also one of the
power sources. So, using LPUART simplifies the set up.

BUG=none
BRANCH=tot
TEST=Verified console works on stm32l476g-eval. make buildall

Change-Id: Iccf697cfabdcb7e1362d8453708eb79610d2e0cb
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/340101
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

4 files changed, 32 insertions, 2 deletions

diff --git a/chip/stm32/dma.c b/chip/stm32/dma.c
index 3b45544190..a3cc6d6de4 100644
--- a/chip/stm32/dma.c
+++ b/chip/stm32/dma.c
@@ -231,7 +231,7 @@ void dma_test(enum dma_channel channel)
 void dma_init(void)
 {
 #ifdef CHIP_FAMILY_STM32L4
-	STM32_RCC_AHB1ENR |= STM32_RCC_AHB1ENR_DMA1EN;
+	STM32_RCC_AHB1ENR |= STM32_RCC_AHB1ENR_DMA1EN|STM32_RCC_AHB1ENR_DMA2EN;
 #else
 	STM32_RCC_AHBENR |= STM32_RCC_HB_DMA1;
 #endif
diff --git a/chip/stm32/registers.h b/chip/stm32/registers.h
index 33b2d9faeb..4a15c20d2d 100644
--- a/chip/stm32/registers.h
+++ b/chip/stm32/registers.h
@@ -132,6 +132,10 @@
 #define STM32_IRQ_SDADC1          61 /* STM32F373 only */
 #define STM32_IRQ_SDADC2          62 /* STM32F373 only */
 #define STM32_IRQ_SDADC3          63 /* STM32F373 only */
+#define STM32_IRQ_DMA2_CHANNEL6   68 /* STM32L4 only */
+#define STM32_IRQ_DMA2_CHANNEL7   69 /* STM32L4 only */
+#define STM32_IRQ_LPUART          70 /* STM32L4 only */
+#define STM32_IRQ_USART9          70 /* STM32L4 only */
 #define STM32_IRQ_USB_WAKEUP      76 /* STM32F373 only */
 #define STM32_IRQ_TIM19           78 /* STM32F373 only */
 #define STM32_IRQ_FPU             81 /* STM32F373 only */
@@ -139,6 +143,8 @@
 /* To simplify code generation, define DMA channel 9..10 */
 #define STM32_IRQ_DMA_CHANNEL_9    STM32_IRQ_DMA2_CHANNEL1
 #define STM32_IRQ_DMA_CHANNEL_10   STM32_IRQ_DMA2_CHANNEL2
+#define STM32_IRQ_DMA_CHANNEL_13   STM32_IRQ_DMA2_CHANNEL6
+#define STM32_IRQ_DMA_CHANNEL_14   STM32_IRQ_DMA2_CHANNEL7
 
 /* aliases for easier code sharing */
 #define STM32_IRQ_I2C1 STM32_IRQ_I2C1_EV
@@ -152,6 +158,7 @@
 #define STM32_USART2_BASE          0x40004400
 #define STM32_USART3_BASE          0x40004800
 #define STM32_USART4_BASE          0x40004c00
+#define STM32_USART9_BASE          0x40008000	/* LPUART */
 
 #define STM32_USART_BASE(n)           CONCAT3(STM32_USART, n, _BASE)
 #define STM32_USART_REG(base, offset) REG32((base) + (offset))
@@ -493,7 +500,12 @@ typedef volatile struct timer_ctlr timer_ctlr_t;
 
 #define STM32_PWR_CR                REG32(STM32_PWR_BASE + 0x00)
 #define STM32_PWR_CR_LPSDSR		(1 << 0)
+#if defined(CHIP_FAMILY_STM32L4)
+#define STM32_PWR_CR2               REG32(STM32_PWR_BASE + 0x04)
+#define STM32_PWR_CSR               REG32(STM32_PWR_BASE + 0x10)
+#else
 #define STM32_PWR_CSR               REG32(STM32_PWR_BASE + 0x04)
+#endif
 #if defined(CHIP_FAMILY_STM32F0) || defined(CHIP_FAMILY_STM32F3)
 #define STM32_PWR_CSR_EWUP1         (1 << 8)
 #define STM32_PWR_CSR_EWUP2         (1 << 9)
@@ -1229,6 +1241,10 @@ enum dma_channel {
 	 */
 	STM32_DMAC_CH9 = 8,
 	STM32_DMAC_CH10 = 9,
+	STM32_DMAC_CH11 = 10,
+	STM32_DMAC_CH12 = 11,
+	STM32_DMAC_CH13 = 12,
+	STM32_DMAC_CH14 = 13,
 
 	/* Channel functions */
 	STM32_DMAC_ADC = STM32_DMAC_CH1,
@@ -1247,7 +1263,9 @@ enum dma_channel {
 	STM32_DMAC_I2C1_RX = STM32_DMAC_CH7,
 	STM32_DMAC_PMSE_ROW = STM32_DMAC_CH6,
 	STM32_DMAC_PMSE_COL = STM32_DMAC_CH7,
-#ifdef CHIP_VARIANT_STM32F373
+#ifdef CHIP_FAMILY_STM32L4
+	STM32_DMAC_COUNT = 14,
+#elif defined(CHIP_VARIANT_STM32F373)
 	STM32_DMAC_SPI2_RX = STM32_DMAC_CH4,
 	STM32_DMAC_SPI2_TX = STM32_DMAC_CH5,
 	STM32_DMAC_SPI3_RX = STM32_DMAC_CH9,
diff --git a/chip/stm32/system.c b/chip/stm32/system.c
index 90a248eafa..e906234f19 100644
--- a/chip/stm32/system.c
+++ b/chip/stm32/system.c
@@ -193,6 +193,10 @@ void system_pre_init(void)
 	clock_wait_bus_cycles(BUS_APB, 1);
 	/* Enable access to RCC CSR register and RTC backup registers */
 	STM32_PWR_CR |= 1 << 8;
+#ifdef CHIP_FAMILY_STM32L4
+	/* Enable Vddio2 */
+	STM32_PWR_CR2 |= 1 << 9;
+#endif
 
 	/* switch on LSI */
 	STM32_RCC_CSR |= 1 << 0;
diff --git a/chip/stm32/uart.c b/chip/stm32/uart.c
index 69dc7d26d2..2804b3153a 100644
--- a/chip/stm32/uart.c
+++ b/chip/stm32/uart.c
@@ -236,7 +236,12 @@ static void uart_freq_change(void)
 	/* UART clocked from the main clock */
 	freq = clock_get_freq();
 #endif
+
+#if (UARTN == 9)	/* LPUART */
+	div = DIV_ROUND_NEAREST(freq, CONFIG_UART_BAUD_RATE) * 256;
+#else
 	div = DIV_ROUND_NEAREST(freq, CONFIG_UART_BAUD_RATE);
+#endif
 
 #if defined(CHIP_FAMILY_STM32L) || defined(CHIP_FAMILY_STM32F0) || \
 	defined(CHIP_FAMILY_STM32F3) || defined(CHIP_FAMILY_STM32L4)
@@ -274,11 +279,14 @@ void uart_init(void)
 #endif /* UARTN */
 #elif defined(CHIP_FAMILY_STM32L4)
 	STM32_RCC_CCIPR |= (0x2 << STM32_RCC_CCIPR_USART1SEL_SHIFT);
+	STM32_RCC_CCIPR |= (0x2 << STM32_RCC_CCIPR_LPUART1SEL_SHIFT);
 #endif /* CHIP_FAMILY_STM32F0 || CHIP_FAMILY_STM32F3 */
 
 	/* Enable USART clock */
 #if (UARTN == 1)
 	STM32_RCC_APB2ENR |= STM32_RCC_PB2_USART1;
+#elif (UARTN == 9)
+	STM32_RCC_APB1ENR2 |= STM32_RCC_APB1ENR2_LPUART1EN;
 #else
 	STM32_RCC_APB1ENR |= CONCAT2(STM32_RCC_PB1_USART, UARTN);
 #endif