board/volteer/board.h: Format with clang-format

BUG=b:236386294
BRANCH=none
TEST=none

Change-Id: I5a0003d2d6d36e7d66f2cdcd6ed74801f851e48e
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3729091
Reviewed-by: Jeremy Bettis <jbettis@chromium.org>

1 files changed, 50 insertions, 51 deletions

diff --git a/board/volteer/board.h b/board/volteer/board.h
index 10fd23486f..473b3ad2eb 100644
--- a/board/volteer/board.h
+++ b/board/volteer/board.h
@@ -54,49 +54,48 @@
 
 /* TCS3400 ALS */
 #define CONFIG_ALS
-#define ALS_COUNT		1
+#define ALS_COUNT 1
 #define CONFIG_ALS_TCS3400
 #define CONFIG_ALS_TCS3400_INT_EVENT \
 	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
 
 /* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	(BIT(LID_ACCEL) | BIT(CLEAR_ALS))
+#define CONFIG_ACCEL_FORCE_MODE_MASK (BIT(LID_ACCEL) | BIT(CLEAR_ALS))
 
 #define CONFIG_LID_ANGLE
 #define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE		BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID		LID_ACCEL
+#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
+#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
 
 /* USB Type C and USB PD defines */
-#define CONFIG_USB_PD_PORT_MAX_COUNT			2
+#define CONFIG_USB_PD_PORT_MAX_COUNT 2
 
 /* TODO: b/144165680 - measure and check these values on Volteer */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000 /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY	30000 /* us */
+#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */
+#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */
 /*
  * SN5S30 PPC supports up to 24V VBUS source and sink, however passive USB-C
  * cables only support up to 60W.
  */
-#define PD_OPERATING_POWER_MW	15000
-#define PD_MAX_POWER_MW		60000
-#define PD_MAX_CURRENT_MA	3000
-#define PD_MAX_VOLTAGE_MV	20000
+#define PD_OPERATING_POWER_MW 15000
+#define PD_MAX_POWER_MW 60000
+#define PD_MAX_CURRENT_MA 3000
+#define PD_MAX_VOLTAGE_MV 20000
 
 /* Enabling Thunderbolt-compatible mode */
 #define CONFIG_USB_PD_TBT_COMPAT_MODE
 
 /* Enabling USB4 mode */
 #define CONFIG_USB_PD_USB4
-#define USBC_PORT_C1_BB_RETIMER_I2C_ADDR	0x40
+#define USBC_PORT_C1_BB_RETIMER_I2C_ADDR 0x40
 
 /* USB Type A Features */
-#define USB_PORT_COUNT			1
+#define USB_PORT_COUNT 1
 #define CONFIG_USB_PORT_POWER_DUMB
 
 /* USBC PPC*/
-#define CONFIG_USBC_PPC_SN5S330		/* USBC port C0 */
-#define CONFIG_USBC_PPC_SYV682X		/* USBC port C1 */
+#define CONFIG_USBC_PPC_SN5S330 /* USBC port C0 */
+#define CONFIG_USBC_PPC_SYV682X /* USBC port C1 */
 #define CONFIG_USB_PD_FRS_PPC
 
 /* BC 1.2 */
@@ -106,8 +105,8 @@
 /* Fan features */
 
 /* charger defines */
-#define CONFIG_CHARGER_SENSE_RESISTOR		10
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC	10
+#define CONFIG_CHARGER_SENSE_RESISTOR 10
+#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
 
 /*
  * Macros for GPIO signals used in common code that don't match the
@@ -115,42 +114,42 @@
  * then redefined here to so it's more clear which signal is being used for
  * which purpose.
  */
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_EC_INT_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_EN_PP5000			GPIO_EN_PP5000_A
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_LID_OPEN			GPIO_EC_LID_OPEN
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PACKET_MODE_EN		GPIO_EC_H1_PACKET_MODE
-#define GPIO_PCH_WAKE_L			GPIO_EC_PCH_WAKE_ODL
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_PCH_PWR_BTN_ODL
-#define GPIO_PCH_RSMRST_L		GPIO_EC_PCH_RSMRST_ODL
-#define GPIO_PCH_RTCRST			GPIO_EC_PCH_RTCRST
-#define GPIO_PCH_SLP_S0_L		GPIO_SLP_S0_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GPIO_PCH_DSW_PWROK		GPIO_EC_PCH_DSW_PWROK
-#define GPIO_POWER_BUTTON_L		GPIO_H1_EC_PWR_BTN_ODL
-#define GPIO_CPU_PROCHOT		GPIO_EC_PROCHOT_ODL
-#define GPIO_SYS_RESET_L		GPIO_SYS_RST_ODL
-#define GPIO_WP_L			GPIO_EC_WP_L
-#define GPIO_USB_C1_BC12_INT_ODL	GPIO_USB_C1_MIX_INT_ODL
-#define GPIO_VOLUME_UP_L		GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L		GPIO_EC_VOLDN_BTN_ODL
+#define GPIO_AC_PRESENT GPIO_ACOK_OD
+#define GPIO_EC_INT_L GPIO_EC_PCH_INT_ODL
+#define GPIO_EN_PP5000 GPIO_EN_PP5000_A
+#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW
+#define GPIO_LID_OPEN GPIO_EC_LID_OPEN
+#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV
+#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE
+#define GPIO_PCH_WAKE_L GPIO_EC_PCH_WAKE_ODL
+#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL
+#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_ODL
+#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST
+#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L
+#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L
+#define GPIO_PCH_DSW_PWROK GPIO_EC_PCH_DSW_PWROK
+#define GPIO_POWER_BUTTON_L GPIO_H1_EC_PWR_BTN_ODL
+#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL
+#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL
+#define GPIO_WP_L GPIO_EC_WP_L
+#define GPIO_USB_C1_BC12_INT_ODL GPIO_USB_C1_MIX_INT_ODL
+#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL
+#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL
 
 /* I2C Bus Configuration */
 #define CONFIG_I2C
-#define I2C_PORT_ACCEL		I2C_PORT_SENSOR
-#define I2C_PORT_SENSOR		NPCX_I2C_PORT0_0
-#define I2C_PORT_USB_C0		NPCX_I2C_PORT1_0
-#define I2C_PORT_USB_C1		NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_1_MIX	NPCX_I2C_PORT3_0
-#define I2C_PORT_POWER		NPCX_I2C_PORT5_0
-#define I2C_PORT_EEPROM		NPCX_I2C_PORT7_0
-
-#define I2C_PORT_BATTERY	I2C_PORT_POWER
-#define I2C_PORT_CHARGER	I2C_PORT_EEPROM
-
-#define I2C_ADDR_EEPROM_FLAGS	0x50
+#define I2C_PORT_ACCEL I2C_PORT_SENSOR
+#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0
+#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0
+#define I2C_PORT_USB_C1 NPCX_I2C_PORT2_0
+#define I2C_PORT_USB_1_MIX NPCX_I2C_PORT3_0
+#define I2C_PORT_POWER NPCX_I2C_PORT5_0
+#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0
+
+#define I2C_PORT_BATTERY I2C_PORT_POWER
+#define I2C_PORT_CHARGER I2C_PORT_EEPROM
+
+#define I2C_ADDR_EEPROM_FLAGS 0x50
 #define CONFIG_I2C_CONTROLLER
 
 #define CONFIG_DEBUG_ASSERT_BRIEF