Merge remote-tracking branch cros/main into factory-brya-14909.124.B-main

Generated by: util/update_release_branch.py --baseboard brya --relevant_paths_file
baseboard/brya/relevant-paths.txt factory-brya-14909.124.B-main

Relevant changes:

git log --oneline 19d4d68ffa..aa40b859b3 -- baseboard/brya board/agah
board/anahera board/banshee board/brya board/crota board/felwinter
board/gimble board/kano board/mithrax board/osiris board/primus
board/redrix board/taeko board/taniks board/vell board/volmar
driver/bc12/pi3usb9201_public.* driver/charger/bq25710.*
driver/ppc/nx20p348x.* driver/ppc/syv682x_public.*
driver/retimer/bb_retimer_public.* driver/tcpm/nct38xx.*
driver/tcpm/ps8xxx_public.* driver/tcpm/tcpci.* include/power/alderlake*
include/intel_x86.h power/alderlake* power/intel_x86.c
util/getversion.sh

e6da633c38 driver: Sort header files
234a87ae2d tcpci: Add FRS enable to driver structure
a56be59ccd tcpm_header: add test for tcpm_dump_registers
57b3256963 Rename CONFIG_CHARGER_INPUT_CURRENT to _CHARGER_DEFAULT_CURRENT_LIMIT
e420c8ff9a marasov: Modify TypeC and TypeA configuration.
43b53e0045 Add default implementation of board_set_charge_limit
b75dc90677 Add CONFIG_CHARGER_MIN_INPUT_CURRENT_LIMIT
f1b563c350 baseboard: Sort header files
7d01b1e58d driver/retimer/ps8818.h: Add I2C ADDR FLAGS 0x30, 0x58, 0x70
ec31407993 Add CONFIG_CHARGER_INPUT_CURRENT_DERATE_PCT
8f89f69a5b crota: disable lid angle sensor for clamshell

BRANCH=None
BUG=b:260630630 b:163093572 b:259002141 b:255184961 b:259354679
BUG=b:247100970 b:254328661
TEST=`emerge-brya chromeos-ec`

Force-Relevant-Builds: all
Change-Id: I0ecfa0e6af68631283c7a9e8f1afb9d827176c62
Signed-off-by: YH Lin <yueherngl@google.com>

1 files changed, 77 insertions, 0 deletions

diff --git a/board/marasov/battery.c b/board/marasov/battery.c
new file mode 100644
index 0000000000..b974930d5b
--- /dev/null
+++ b/board/marasov/battery.c
@@ -0,0 +1,77 @@
+/* Copyright 2022 The ChromiumOS Authors
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Battery pack vendor provided charging profile
+ */
+
+#include "battery_fuel_gauge.h"
+#include "cbi.h"
+#include "common.h"
+#include "compile_time_macros.h"
+#include "gpio.h"
+/*
+ * Battery info for all Brya battery types. Note that the fields
+ * start_charging_min/max and charging_min/max are not used for the charger.
+ * The effective temperature limits are given by discharging_min/max_c.
+ *
+ * Fuel Gauge (FG) parameters which are used for determining if the battery
+ * is connected, the appropriate ship mode (battery cutoff) command, and the
+ * charge/discharge FETs status.
+ *
+ * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
+ * register. For some batteries, the charge/discharge FET bits are set when
+ * charging/discharging is active, in other types, these bits set mean that
+ * charging/discharging is disabled. Therefore, in addition to the mask for
+ * these bits, a disconnect value must be specified. Note that for TI fuel
+ * gauge, the charge/discharge FET status is found in Operation Status (0x54),
+ * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
+ * Operation status which contains the FET status bits.
+ *
+ * The assumption for battery types supported is that the charge/discharge FET
+ * status can be read with a sb_read() command and therefore, only the register
+ * address, mask, and disconnect value need to be provided.
+ */
+const struct board_batt_params board_battery_info[] = {
+	/* C490-42 Battery Information */
+	[BATTERY_C490] = {
+		.fuel_gauge = {
+			.manuf_name = "AS3GWQd3jB",
+			.device_name = "C490-42",
+			.ship_mode = {
+				.reg_addr = 0x00,
+				.reg_data = { 0x0010, 0x0010 },
+			},
+			.fet = {
+				.reg_addr = 0x99,
+				.reg_mask = 0x000c,
+				.disconnect_val = 0x000c,
+			}
+		},
+		.batt_info = {
+			.voltage_max		= 13200, /* mV */
+			.voltage_normal		= 11880, /* mV */
+			.voltage_min		= 9000, /* mV */
+			.precharge_current	= 256,	/* mA */
+			.start_charging_min_c	= 0,
+			.start_charging_max_c	= 45,
+			.charging_min_c		= 0,
+			.charging_max_c		= 60,
+			.discharging_min_c	= -20,
+			.discharging_max_c	= 60,
+		},
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
+
+const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_C490;
+
+enum battery_present battery_hw_present(void)
+{
+	enum gpio_signal batt_pres;
+
+	batt_pres = GPIO_EC_BATT_PRES_ODL;
+
+	/* The GPIO is low when the battery is physically present */
+	return gpio_get_level(batt_pres) ? BP_NO : BP_YES;
+}