lingcod: Initial EC image

Create the initial EC image for the lingcod variant by copying the
malefor reference board EC files into a new directory named for
the variant.

(Auto-Generated by create_initial_ec_image.sh version 1.0.3).

BUG=b:161103776
BRANCH=none
TEST=make BOARD=lingcod

Signed-off-by: hao.zhou <hao.zhou3@bitland.corp-partner.google.com>
Change-Id: I8b1d7f2deff74dfac5bcb8f32684c53448fff576
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2297073
Reviewed-by: Keith Short <keithshort@chromium.org>

1 files changed, 353 insertions, 0 deletions

diff --git a/board/lingcod/board.c b/board/lingcod/board.c
new file mode 100644
index 0000000000..5841ea0385
--- /dev/null
+++ b/board/lingcod/board.c
@@ -0,0 +1,353 @@
+/* Copyright 2020 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Malefor board-specific configuration */
+
+#include "button.h"
+#include "cbi_ec_fw_config.h"
+#include "common.h"
+#include "driver/accel_lis2dh.h"
+#include "driver/accelgyro_lsm6dsm.h"
+#include "driver/ppc/sn5s330.h"
+#include "driver/ppc/syv682x.h"
+#include "driver/sync.h"
+#include "extpower.h"
+#include "fan.h"
+#include "fan_chip.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "keyboard_scan.h"
+#include "lid_switch.h"
+#include "power.h"
+#include "power_button.h"
+#include "pwm.h"
+#include "pwm_chip.h"
+#include "switch.h"
+#include "system.h"
+#include "task.h"
+#include "tablet_mode.h"
+#include "uart.h"
+#include "usbc_ppc.h"
+#include "util.h"
+
+#include "gpio_list.h" /* Must come after other header files. */
+
+#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
+#define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ## args)
+
+/*
+ * FW_CONFIG defaults for Malefor if the CBI data is not initialized.
+ */
+union volteer_cbi_fw_config fw_config_defaults = {
+	.usb_db = DB_USB3_NO_A,
+};
+
+static void board_init(void)
+{
+	if (ec_cfg_has_tabletmode()) {
+		/* Enable gpio interrupt for base accelgyro sensor */
+		gpio_enable_interrupt(GPIO_EC_IMU_INT_L);
+	} else {
+		motion_sensor_count = 0;
+		/* Device is clamshell only */
+		tablet_set_mode(0);
+		/* Gyro is not present, don't allow line to float */
+		gpio_set_flags(GPIO_EC_IMU_INT_L, GPIO_INPUT | GPIO_PULL_DOWN);
+	}
+
+	/*
+	 * TODO: b/154447182 - Malefor will control power LED and battery LED
+	 * independently, and keep the max brightness of power LED and battery
+	 * LED as 50%.
+	 */
+	pwm_enable(PWM_CH_LED4_SIDESEL, 1);
+	pwm_set_duty(PWM_CH_LED4_SIDESEL, 50);
+}
+DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
+
+int board_is_lid_angle_tablet_mode(void)
+{
+	return ec_cfg_has_tabletmode();
+}
+
+/* Enable or disable input devices, based on tablet mode or chipset state */
+#ifndef TEST_BUILD
+void lid_angle_peripheral_enable(int enable)
+{
+	if (ec_cfg_has_tabletmode()) {
+		if (chipset_in_state(CHIPSET_STATE_ANY_OFF) ||
+			tablet_get_mode())
+			enable = 0;
+		keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE);
+	}
+}
+#endif
+
+/******************************************************************************/
+/* Sensors */
+/* Lid and base Sensor mutex */
+static struct mutex g_lid_accel_mutex;
+static struct mutex g_base_mutex;
+
+/* Lid and base accel private data */
+static struct stprivate_data g_lis2dh_data;
+static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
+
+/* Matrix to rotate lid and base sensor into standard reference frame */
+static const mat33_fp_t lid_standard_ref = {
+	{ 0, FLOAT_TO_FP(1), 0},
+	{ FLOAT_TO_FP(1), 0, 0},
+	{ 0, 0, FLOAT_TO_FP(-1)}
+};
+
+static const mat33_fp_t base_standard_ref = {
+	{ FLOAT_TO_FP(1), 0, 0},
+	{ 0, FLOAT_TO_FP(-1), 0},
+	{ 0, 0, FLOAT_TO_FP(-1)}
+};
+
+struct motion_sensor_t motion_sensors[] = {
+	[LID_ACCEL] = {
+		.name = "Lid Accel",
+		.active_mask = SENSOR_ACTIVE_S0_S3,
+		.chip = MOTIONSENSE_CHIP_LIS2DE,
+		.type = MOTIONSENSE_TYPE_ACCEL,
+		.location = MOTIONSENSE_LOC_LID,
+		.drv = &lis2dh_drv,
+		.mutex = &g_lid_accel_mutex,
+		.drv_data = &g_lis2dh_data,
+		.port = I2C_PORT_SENSOR,
+		.i2c_spi_addr_flags = LIS2DH_ADDR1_FLAGS,
+		.rot_standard_ref = &lid_standard_ref,
+		.min_frequency = LIS2DH_ODR_MIN_VAL,
+		.max_frequency = LIS2DH_ODR_MAX_VAL,
+		.default_range = 2, /* g, to support tablet mode */
+		.config = {
+			/* EC use accel for angle detection */
+			[SENSOR_CONFIG_EC_S0] = {
+				.odr = 10000 | ROUND_UP_FLAG,
+			},
+			/* Sensor on in S3 */
+			[SENSOR_CONFIG_EC_S3] = {
+				.odr = 10000 | ROUND_UP_FLAG,
+			},
+		},
+	},
+
+	[BASE_ACCEL] = {
+		.name = "Base Accel",
+		.active_mask = SENSOR_ACTIVE_S0_S3,
+		.chip = MOTIONSENSE_CHIP_LSM6DSM,
+		.type = MOTIONSENSE_TYPE_ACCEL,
+		.location = MOTIONSENSE_LOC_BASE,
+		.drv = &lsm6dsm_drv,
+		.mutex = &g_base_mutex,
+		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
+				MOTIONSENSE_TYPE_ACCEL),
+		.int_signal = GPIO_EC_IMU_INT_L,
+		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
+		.port = I2C_PORT_SENSOR,
+		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
+		.rot_standard_ref = &base_standard_ref,
+		.default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
+		.min_frequency = LSM6DSM_ODR_MIN_VAL,
+		.max_frequency = LSM6DSM_ODR_MAX_VAL,
+		.config = {
+			/* EC use accel for angle detection */
+			[SENSOR_CONFIG_EC_S0] = {
+				.odr = 13000 | ROUND_UP_FLAG,
+				.ec_rate = 100 * MSEC,
+			},
+			/* Sensor on for angle detection */
+			[SENSOR_CONFIG_EC_S3] = {
+				.odr = 10000 | ROUND_UP_FLAG,
+				.ec_rate = 100 * MSEC,
+			},
+		},
+	},
+
+	[BASE_GYRO] = {
+		.name = "Base Gyro",
+		.active_mask = SENSOR_ACTIVE_S0_S3,
+		.chip = MOTIONSENSE_CHIP_LSM6DSM,
+		.type = MOTIONSENSE_TYPE_GYRO,
+		.location = MOTIONSENSE_LOC_BASE,
+		.drv = &lsm6dsm_drv,
+		.mutex = &g_base_mutex,
+		.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
+				MOTIONSENSE_TYPE_GYRO),
+		.int_signal = GPIO_EC_IMU_INT_L,
+		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
+		.port = I2C_PORT_SENSOR,
+		.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
+		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
+		.rot_standard_ref = &base_standard_ref,
+		.min_frequency = LSM6DSM_ODR_MIN_VAL,
+		.max_frequency = LSM6DSM_ODR_MAX_VAL,
+	},
+};
+unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
+
+/******************************************************************************/
+/* Physical fans. These are logically separate from pwm_channels. */
+
+const struct fan_conf fan_conf_0 = {
+	.flags = FAN_USE_RPM_MODE,
+	.ch = MFT_CH_0,	/* Use MFT id to control fan */
+	.pgood_gpio = -1,
+	.enable_gpio = GPIO_EN_PP5000_FAN,
+};
+
+/*
+ * Fan specs from datasheet:
+ * Max speed 5900 rpm (+/- 7%), minimum duty cycle 30%.
+ * Minimum speed not specified by RPM. Set minimum RPM to max speed (with
+ * margin) x 30%.
+ *    5900 x 1.07 x 0.30 = 1894, round up to 1900
+ */
+const struct fan_rpm fan_rpm_0 = {
+	.rpm_min = 1900,
+	.rpm_start = 1900,
+	.rpm_max = 5900,
+};
+
+const struct fan_t fans[FAN_CH_COUNT] = {
+	[FAN_CH_0] = {
+		.conf = &fan_conf_0,
+		.rpm = &fan_rpm_0,
+	},
+};
+
+/******************************************************************************/
+/* MFT channels. These are logically separate from pwm_channels. */
+const struct mft_t mft_channels[] = {
+	[MFT_CH_0] = {
+		.module = NPCX_MFT_MODULE_1,
+		.clk_src = TCKC_LFCLK,
+		.pwm_id = PWM_CH_FAN,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
+
+/******************************************************************************/
+/* I2C port map configuration */
+const struct i2c_port_t i2c_ports[] = {
+	{
+		.name = "sensor",
+		.port = I2C_PORT_SENSOR,
+		.kbps = 400,
+		.scl = GPIO_EC_I2C0_SENSOR_SCL,
+		.sda = GPIO_EC_I2C0_SENSOR_SDA,
+	},
+	{
+		.name = "usb_c0",
+		.port = I2C_PORT_USB_C0,
+		.kbps = 1000,
+		.scl = GPIO_EC_I2C1_USB_C0_SCL,
+		.sda = GPIO_EC_I2C1_USB_C0_SDA,
+	},
+	{
+		.name = "usb_c1",
+		.port = I2C_PORT_USB_C1,
+		.kbps = 1000,
+		.scl = GPIO_EC_I2C2_USB_C1_SCL,
+		.sda = GPIO_EC_I2C2_USB_C1_SDA,
+	},
+	{
+		.name = "usb_1_mix",
+		.port = I2C_PORT_USB_1_MIX,
+		.kbps = 100,
+		.scl = GPIO_EC_I2C3_USB_1_MIX_SCL,
+		.sda = GPIO_EC_I2C3_USB_1_MIX_SDA,
+	},
+	{
+		.name = "power",
+		.port = I2C_PORT_POWER,
+		.kbps = 100,
+		.scl = GPIO_EC_I2C5_POWER_SCL,
+		.sda = GPIO_EC_I2C5_POWER_SDA,
+	},
+	{
+		.name = "eeprom",
+		.port = I2C_PORT_EEPROM,
+		.kbps = 400,
+		.scl = GPIO_EC_I2C7_EEPROM_SCL,
+		.sda = GPIO_EC_I2C7_EEPROM_SDA,
+	},
+};
+const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
+
+/******************************************************************************/
+/* PWM configuration */
+const struct pwm_t pwm_channels[] = {
+	[PWM_CH_LED4_SIDESEL] = {
+		.channel = 7,
+		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
+		/* Run at a higher frequency than the color PWM signals to avoid
+		 * timing-based color shifts.
+		 */
+		.freq = 4800,
+	},
+	[PWM_CH_FAN] = {
+		.channel = 5,
+		.flags = PWM_CONFIG_OPEN_DRAIN,
+		.freq = 25000
+	},
+	[PWM_CH_KBLIGHT] = {
+		.channel = 3,
+		.flags = 0,
+		/*
+		 * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
+		 * flicker. Higher frequencies consume similar average power to
+		 * lower PWM frequencies, but higher frequencies record a much
+		 * lower maximum power.
+		 */
+		.freq = 2400,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
+
+void board_reset_pd_mcu(void)
+{
+	/* TODO(b/159024035): Malefor: check USB PD reset operation */
+}
+
+__override void board_cbi_init(void)
+{
+	/* TODO(b/159024035): Malefor: check FW_CONFIG fields for USB DB type */
+}
+
+/******************************************************************************/
+/* USBC PPC configuration */
+struct ppc_config_t ppc_chips[] = {
+	[USBC_PORT_C0] = {
+		.i2c_port = I2C_PORT_USB_C0,
+		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
+		.drv = &sn5s330_drv,
+	},
+	[USBC_PORT_C1] = {
+		.i2c_port = I2C_PORT_USB_C1,
+		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
+		.drv = &syv682x_drv,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
+unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
+
+/******************************************************************************/
+/* PPC support routines */
+void ppc_interrupt(enum gpio_signal signal)
+{
+	switch (signal) {
+	case GPIO_USB_C0_PPC_INT_ODL:
+		sn5s330_interrupt(USBC_PORT_C0);
+		break;
+	case GPIO_USB_C1_PPC_INT_ODL:
+		syv682x_interrupt(USBC_PORT_C1);
+	default:
+		break;
+	}
+}
+