treeya: Add new grunt-family board.

Add treeya board. Initially base on aleena.

BUG=b:135551210
BRANCH=none
TEST=emerge-grunt chromeos-ec
Ensure that ec.bin are created

Change-Id: I16abc65af81d5127c0f964a42327e60a8674be22
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1710209
Reviewed-by: Edward Hill <ecgh@chromium.org>
Commit-Queue: Edward Hill <ecgh@chromium.org>
Tested-by: Edward Hill <ecgh@chromium.org>

8 files changed, 707 insertions, 0 deletions

diff --git a/board/treeya/analyzestack.yaml b/board/treeya/analyzestack.yaml
new file mode 120000
index 0000000000..9873122a08
--- /dev/null
+++ b/board/treeya/analyzestack.yaml
@@ -0,0 +1 @@
+../../baseboard/grunt/analyzestack.yaml
\ No newline at end of file
diff --git a/board/treeya/battery.c b/board/treeya/battery.c
new file mode 100644
index 0000000000..91cdab84b7
--- /dev/null
+++ b/board/treeya/battery.c
@@ -0,0 +1,121 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Battery pack vendor provided charging profile
+ */
+
+#include "battery_fuel_gauge.h"
+#include "common.h"
+#include "util.h"
+
+/*
+ * Battery info for all Treeya battery types. Note that the fields
+ * start_charging_min/max and charging_min/max are not used for the charger.
+ * The effective temperature limits are given by discharging_min/max_c.
+ *
+ * Fuel Gauge (FG) parameters which are used for determining if the battery
+ * is connected, the appropriate ship mode (battery cutoff) command, and the
+ * charge/discharge FETs status.
+ *
+ * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
+ * register. For some batteries, the charge/discharge FET bits are set when
+ * charging/discharging is active, in other types, these bits set mean that
+ * charging/discharging is disabled. Therefore, in addition to the mask for
+ * these bits, a disconnect value must be specified. Note that for TI fuel
+ * gauge, the charge/discharge FET status is found in Operation Status (0x54),
+ * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
+ * Operation status which contains the FET status bits.
+ *
+ * The assumption for battery types supported is that the charge/discharge FET
+ * status can be read with a sb_read() command and therefore, only the register
+ * address, mask, and disconnect value need to be provided.
+ */
+const struct board_batt_params board_battery_info[] = {
+	/* Panasonic AP15O5L Battery Information */
+	[BATTERY_PANASONIC] = {
+		.fuel_gauge = {
+			.manuf_name = "PANASONIC",
+			.ship_mode = {
+				.reg_addr = 0x3A,
+				.reg_data = { 0xC574, 0xC574 },
+			},
+			.fet = {
+				.reg_addr = 0x0,
+				.reg_mask = 0x4000,
+				.disconnect_val = 0x0,
+			}
+		},
+		.batt_info = {
+			.voltage_max		= 13200,
+			.voltage_normal		= 11550, /* mV */
+			.voltage_min		= 9000, /* mV */
+			.precharge_current	= 256,	/* mA */
+			.start_charging_min_c	= 0,
+			.start_charging_max_c	= 50,
+			.charging_min_c		= 0,
+			.charging_max_c		= 60,
+			.discharging_min_c	= 0,
+			.discharging_max_c	= 60,
+		},
+	},
+
+	/* Murata AP18C4K Battery Information */
+	[BATTERY_MURATA_4012] = {
+		.fuel_gauge = {
+			.manuf_name = "Murata KT00304012",
+			.ship_mode = {
+				.reg_addr = 0x3A,
+				.reg_data = { 0xC574, 0xC574 },
+			},
+			.fet = {
+				.reg_addr = 0x0,
+				.reg_mask = 0x2000,
+				.disconnect_val = 0x2000,
+			}
+		},
+		.batt_info = {
+			.voltage_max		= 13200,
+			.voltage_normal		= 11400, /* mV */
+			.voltage_min		= 9000, /* mV */
+			.precharge_current	= 256,	/* mA */
+			.start_charging_min_c	= 0,
+			.start_charging_max_c	= 50,
+			.charging_min_c		= 0,
+			.charging_max_c		= 60,
+			.discharging_min_c	= -20,
+			.discharging_max_c	= 75,
+		},
+	},
+
+	/* Murata AP18K4K Battery Information */
+	[BATTERY_MURATA_4013] = {
+		.fuel_gauge = {
+			.manuf_name = "Murata KT00304013",
+			.ship_mode = {
+				.reg_addr = 0x3A,
+				.reg_data = { 0xC574, 0xC574 },
+			},
+			.fet = {
+				.reg_addr = 0x0,
+				.reg_mask = 0x2000,
+				.disconnect_val = 0x2000,
+			}
+		},
+		.batt_info = {
+			.voltage_max		= 13200,
+			.voltage_normal		= 11400, /* mV */
+			.voltage_min		= 9000, /* mV */
+			.precharge_current	= 256,	/* mA */
+			.start_charging_min_c	= 0,
+			.start_charging_max_c	= 50,
+			.charging_min_c		= 0,
+			.charging_max_c		= 60,
+			.discharging_min_c	= -20,
+			.discharging_max_c	= 75,
+		},
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
+
+const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_PANASONIC;
diff --git a/board/treeya/board.c b/board/treeya/board.c
new file mode 100644
index 0000000000..12f985e727
--- /dev/null
+++ b/board/treeya/board.c
@@ -0,0 +1,252 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Treeya board-specific configuration */
+
+#include "adc.h"
+#include "adc_chip.h"
+#include "button.h"
+#include "charge_manager.h"
+#include "charge_state.h"
+#include "charge_state_v2.h"
+#include "common.h"
+#include "compile_time_macros.h"
+#include "console.h"
+#include "driver/accelgyro_bmi160.h"
+#include "driver/led/lm3630a.h"
+#include "driver/ppc/sn5s330.h"
+#include "driver/tcpm/anx74xx.h"
+#include "driver/tcpm/ps8xxx.h"
+#include "driver/temp_sensor/sb_tsi.h"
+#include "ec_commands.h"
+#include "extpower.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "i2c.h"
+#include "keyboard_scan.h"
+#include "lid_switch.h"
+#include "power.h"
+#include "power_button.h"
+#include "pwm.h"
+#include "pwm_chip.h"
+#include "registers.h"
+#include "switch.h"
+#include "system.h"
+#include "tablet_mode.h"
+#include "task.h"
+#include "tcpci.h"
+#include "temp_sensor.h"
+#include "thermistor.h"
+#include "usb_mux.h"
+#include "usb_pd_tcpm.h"
+#include "usbc_ppc.h"
+#include "util.h"
+
+#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
+#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+
+#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
+static void anx74xx_cable_det_handler(void)
+{
+	int cable_det = gpio_get_level(GPIO_USB_C0_CABLE_DET);
+	int reset_n = gpio_get_level(GPIO_USB_C0_PD_RST_L);
+
+	/*
+	 * A cable_det low->high transition was detected. If following the
+	 * debounce time, cable_det is high, and reset_n is low, then ANX3429 is
+	 * currently in standby mode and needs to be woken up. Set the
+	 * TCPC_RESET event which will bring the ANX3429 out of standby
+	 * mode. Setting this event is gated on reset_n being low because the
+	 * ANX3429 will always set cable_det when transitioning to normal mode
+	 * and if in normal mode, then there is no need to trigger a tcpc reset.
+	 */
+	if (cable_det && !reset_n)
+		task_set_event(TASK_ID_PD_C0, PD_EVENT_TCPC_RESET, 0);
+}
+DECLARE_DEFERRED(anx74xx_cable_det_handler);
+
+void anx74xx_cable_det_interrupt(enum gpio_signal signal)
+{
+	/* debounce for 2 msec */
+	hook_call_deferred(&anx74xx_cable_det_handler_data, (2 * MSEC));
+}
+#endif
+
+static void ppc_interrupt(enum gpio_signal signal)
+{
+	int port = (signal == GPIO_USB_C0_SWCTL_INT_ODL) ? 0 : 1;
+
+	sn5s330_interrupt(port);
+}
+
+#include "gpio_list.h"
+
+const enum gpio_signal hibernate_wake_pins[] = {
+	GPIO_LID_OPEN,
+	GPIO_AC_PRESENT,
+	GPIO_POWER_BUTTON_L,
+	GPIO_EC_RST_ODL,
+};
+const int hibernate_wake_pins_used =  ARRAY_SIZE(hibernate_wake_pins);
+
+/* I2C port map. */
+const struct i2c_port_t i2c_ports[] = {
+	{"power",   I2C_PORT_POWER,   100, GPIO_I2C0_SCL, GPIO_I2C0_SDA},
+	{"tcpc0",   I2C_PORT_TCPC0,   400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
+	{"tcpc1",   I2C_PORT_TCPC1,   400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
+	{"thermal", I2C_PORT_THERMAL, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
+	{"kblight", I2C_PORT_KBLIGHT, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA},
+	{"sensor",  I2C_PORT_SENSOR,  400, GPIO_I2C7_SCL, GPIO_I2C7_SDA},
+};
+const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
+
+/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
+const struct pwm_t pwm_channels[] = {
+	[PWM_CH_KBLIGHT] = {
+		.channel = 5,
+		.flags = PWM_CONFIG_DSLEEP,
+		.freq = 100,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
+
+void board_update_sensor_config_from_sku(void)
+{
+	if (board_is_convertible()) {
+		/* Enable Gyro interrupts */
+		gpio_enable_interrupt(GPIO_6AXIS_INT_L);
+	} else {
+		motion_sensor_count = 0;
+		/* Device is clamshell only */
+		tablet_set_mode(0);
+		/* Gyro is not present, don't allow line to float */
+		gpio_set_flags(GPIO_6AXIS_INT_L,
+			       GPIO_INPUT | GPIO_PULL_DOWN);
+	}
+}
+
+void board_overcurrent_event(int port, int is_overcurrented)
+{
+	enum gpio_signal signal = (port == 0) ? GPIO_USB_C0_OC_L
+					      : GPIO_USB_C1_OC_L;
+	/* Note that the levels are inverted because the pin is active low. */
+	int lvl = is_overcurrented ? 0 : 1;
+
+	gpio_set_level(signal, lvl);
+
+	CPRINTS("p%d: overcurrent!", port);
+}
+
+void board_tcpc_init(void)
+{
+	int port;
+
+	/* Only reset TCPC if not sysjump */
+	if (!system_jumped_to_this_image())
+		board_reset_pd_mcu();
+
+	/* Enable PPC interrupts. */
+	gpio_enable_interrupt(GPIO_USB_C0_SWCTL_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_SWCTL_INT_ODL);
+
+	/* Enable TCPC interrupts. */
+	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
+	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);
+
+#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
+	/* Enable CABLE_DET interrupt for ANX3429 wake from standby */
+	gpio_enable_interrupt(GPIO_USB_C0_CABLE_DET);
+#endif
+	/*
+	 * Initialize HPD to low; after sysjump SOC needs to see
+	 * HPD pulse to enable video path
+	 */
+	for (port = 0; port < CONFIG_USB_PD_PORT_COUNT; port++) {
+		const struct usb_mux *mux = &usb_muxes[port];
+
+		mux->hpd_update(port, 0, 0);
+	}
+}
+DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1);
+
+uint16_t tcpc_get_alert_status(void)
+{
+	uint16_t status = 0;
+
+	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) {
+		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
+			status |= PD_STATUS_TCPC_ALERT_0;
+	}
+
+	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL)) {
+		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
+			status |= PD_STATUS_TCPC_ALERT_1;
+	}
+
+	return status;
+}
+
+/**
+ * Power on (or off) a single TCPC.
+ * minimum on/off delays are included.
+ *
+ * @param port	Port number of TCPC.
+ * @param mode	0: power off, 1: power on.
+ */
+void board_set_tcpc_power_mode(int port, int mode)
+{
+	if (port != USB_PD_PORT_ANX74XX)
+		return;
+
+	switch (mode) {
+	case ANX74XX_NORMAL_MODE:
+		gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 1);
+		msleep(ANX74XX_PWR_H_RST_H_DELAY_MS);
+		gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
+		break;
+	case ANX74XX_STANDBY_MODE:
+		gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
+		msleep(ANX74XX_RST_L_PWR_L_DELAY_MS);
+		gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0);
+		msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
+		break;
+	default:
+		break;
+	}
+}
+
+void board_reset_pd_mcu(void)
+{
+	/* Assert reset to TCPC1 (ps8751) */
+	gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
+
+	/* Assert reset to TCPC0 (anx3429) */
+	gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
+
+	/* TCPC1 (ps8751) requires 1ms reset down assertion */
+	msleep(MAX(1, ANX74XX_RST_L_PWR_L_DELAY_MS));
+
+	/* Deassert reset to TCPC1 */
+	gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
+	/* Disable TCPC0 power */
+	gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0);
+
+	/*
+	 * anx3429 requires 10ms reset/power down assertion
+	 */
+	msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
+	board_set_tcpc_power_mode(USB_PD_PORT_ANX74XX, 1);
+}
+
+static void board_kblight_init(void)
+{
+	/*
+	 * Enable keyboard backlight. This needs to be done here because
+	 * the chip doesn't have power until PP3300_S0 comes up.
+	 */
+	gpio_set_level(GPIO_KB_BL_EN, 1);
+	lm3630a_poweron();
+}
+DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_kblight_init, HOOK_PRIO_DEFAULT);
diff --git a/board/treeya/board.h b/board/treeya/board.h
new file mode 100644
index 0000000000..3abf3e2d41
--- /dev/null
+++ b/board/treeya/board.h
@@ -0,0 +1,69 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Treeya board configuration */
+
+#ifndef __CROS_EC_BOARD_H
+#define __CROS_EC_BOARD_H
+
+#include "baseboard.h"
+
+/*
+ * By default, enable all console messages excepted HC, ACPI and event:
+ * The sensor stack is generating a lot of activity.
+ */
+#define CC_DEFAULT     (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC)))
+#undef CONFIG_HOSTCMD_DEBUG_MODE
+#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF
+
+/* Power and battery LEDs */
+#define CONFIG_LED_COMMON
+#define CONFIG_CMD_LEDTEST
+
+#define CONFIG_LED_ONOFF_STATES
+
+#define I2C_PORT_KBLIGHT NPCX_I2C_PORT5_0
+
+/* KB backlight driver */
+#define CONFIG_LED_DRIVER_LM3630A
+
+#define CONFIG_MKBP_USE_GPIO
+
+/* Motion sensing drivers */
+#define CONFIG_ACCELGYRO_BMI160
+#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
+	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
+#define CONFIG_ACCEL_INTERRUPTS
+#define CONFIG_ACCEL_KX022
+#define CONFIG_CMD_ACCELS
+#define CONFIG_CMD_ACCEL_INFO
+#define CONFIG_TABLET_MODE
+#define CONFIG_LID_ANGLE
+#define CONFIG_LID_ANGLE_UPDATE
+#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
+#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
+/*
+ * Slew rate on the PP1800_SENSOR load switch requires a short delay on startup.
+ */
+#undef  CONFIG_MOTION_SENSE_RESUME_DELAY_US
+#define CONFIG_MOTION_SENSE_RESUME_DELAY_US (10 * MSEC)
+
+#ifndef __ASSEMBLER__
+
+enum pwm_channel {
+	PWM_CH_KBLIGHT = 0,
+	PWM_CH_COUNT
+};
+
+enum battery_type {
+	BATTERY_PANASONIC,
+	BATTERY_MURATA_4012,
+	BATTERY_MURATA_4013,
+	BATTERY_TYPE_COUNT,
+};
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __CROS_EC_BOARD_H */
diff --git a/board/treeya/build.mk b/board/treeya/build.mk
new file mode 100644
index 0000000000..250abe6712
--- /dev/null
+++ b/board/treeya/build.mk
@@ -0,0 +1,15 @@
+# -*- makefile -*-
+# Copyright 2019 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+#
+# Board specific files build
+#
+
+CHIP:=npcx
+CHIP_FAMILY:=npcx7
+CHIP_VARIANT:=npcx7m6f
+BASEBOARD:=grunt
+
+board-y=board.o led.o
+board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/treeya/ec.tasklist b/board/treeya/ec.tasklist
new file mode 100644
index 0000000000..4c4a4898b1
--- /dev/null
+++ b/board/treeya/ec.tasklist
@@ -0,0 +1,26 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/*
+ * See CONFIG_TASK_LIST in config.h for details.
+ */
+
+#define CONFIG_TASK_LIST \
+	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
+	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
+	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, TASK_STACK_SIZE) \
+	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
+	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
+	TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
+	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
+	TASK_NOTEST(PDCMD, pd_command_task, NULL, LARGER_TASK_STACK_SIZE) \
+	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
+	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
+	TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
+	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
+	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
+	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
+	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
+	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
diff --git a/board/treeya/gpio.inc b/board/treeya/gpio.inc
new file mode 100644
index 0000000000..65607d03e2
--- /dev/null
+++ b/board/treeya/gpio.inc
@@ -0,0 +1,122 @@
+/* -*- mode:c -*-
+ *
+ * Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Declare symbolic names for all the GPIOs that we care about.
+ * Note: Those with interrupt handlers must be declared first. */
+
+GPIO_INT(USB_C0_PD_INT_ODL,	PIN(A, 0), GPIO_INT_FALLING,			tcpc_alert_event)
+GPIO_INT(USB_C1_PD_INT_ODL,	PIN(F, 5), GPIO_INT_FALLING,			tcpc_alert_event)
+GPIO_INT(USB_C0_SWCTL_INT_ODL,	PIN(0, 3), GPIO_INT_FALLING,			ppc_interrupt)
+GPIO_INT(USB_C1_SWCTL_INT_ODL,	PIN(D, 4), GPIO_INT_FALLING,			ppc_interrupt)
+GPIO_INT(PCH_SLP_S3_L,		PIN(A, 6), GPIO_INT_BOTH,			power_signal_interrupt)
+GPIO_INT(PCH_SLP_S5_L,		PIN(A, 3), GPIO_INT_BOTH,			power_signal_interrupt)
+GPIO_INT(S0_PGOOD,		PIN(F, 4), GPIO_INT_BOTH,			power_signal_interrupt)
+GPIO_INT(S5_PGOOD,		PIN(6, 3), GPIO_INT_BOTH | GPIO_PULL_UP,	power_signal_interrupt)
+GPIO_INT(POWER_BUTTON_L,	PIN(0, 1), GPIO_INT_BOTH,			power_button_interrupt)
+GPIO_INT(LID_OPEN,		PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH | GPIO_PULL_UP,	lid_interrupt)
+GPIO_INT(AC_PRESENT,		PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	extpower_interrupt)
+GPIO_INT(WP_L,			PIN(A, 1), GPIO_INT_BOTH,			switch_interrupt)
+GPIO_INT(VOLUME_DOWN_L,		PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
+GPIO_INT(VOLUME_UP_L,		PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
+GPIO_INT(USB_C0_CABLE_DET,	PIN(3, 7), GPIO_INT_RISING,			anx74xx_cable_det_interrupt)
+GPIO_INT(6AXIS_INT_L,		PIN(8, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V,	bmi160_interrupt)
+
+/* GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an interrupt handler. */
+GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH)
+
+GPIO(EN_PWR_A,			PIN(E, 2), GPIO_OUT_LOW)			/* Enable Power */
+GPIO(EN_PP1800_SENSOR,		PIN(6, 7), GPIO_OUT_LOW)			/* Enable Power */
+GPIO(ENABLE_BACKLIGHT_L,	PIN(D, 3), GPIO_OUT_HIGH)			/* Enable Backlight */
+GPIO(PCH_RSMRST_L,		PIN(C, 2), GPIO_OUT_LOW)			/* RSMRST# to SOC */
+GPIO(PCH_PWRBTN_L,		PIN(C, 1), GPIO_OUT_HIGH)			/* Power Button to SOC */
+GPIO(PCH_WAKE_L,		PIN(7, 4), GPIO_OUT_HIGH)			/* Wake SOC */
+GPIO(SYS_RESET_L,		PIN(E, 4), GPIO_ODR_HIGH)			/* Cold Reset to SOC */
+GPIO(CCD_MODE_ODL,		PIN(E, 3), GPIO_INPUT)				/* Case Closed Debug Mode */
+GPIO(ENTERING_RW,		PIN(E, 1), GPIO_OUT_LOW)			/* EC Entering RW */
+GPIO(EC_BATT_PRES_L,		PIN(E, 5), GPIO_INPUT | GPIO_PULL_UP)		/* Battery Present */
+GPIO(PCH_SYS_PWROK,		PIN(D, 6), GPIO_OUT_LOW)			/* Power OK to SOC */
+GPIO(CPU_PROCHOT,		PIN(3, 4), GPIO_INPUT | GPIO_SEL_1P8V)		/* PROCHOT to SOC */
+GPIO(APU_ALERT_L,		PIN(A, 2), GPIO_INPUT)				/* Alert to SOC */
+GPIO(3AXIS_INT_L,		PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V)		/* 3 Axis Accel */
+GPIO(KB_BL_EN,			PIN(F, 2), GPIO_OUT_LOW)			/* Enable KB Backlight */
+GPIO(EC_INT_L,			PIN(A, 4), GPIO_ODR_HIGH)			/* Sensor MKBP event to SOC */
+
+/* I2C pins - these will be reconfigured for alternate function below */
+GPIO(I2C0_SCL,			PIN(B, 5), GPIO_INPUT)				/* EC_I2C_POWER_SCL */
+GPIO(I2C0_SDA,			PIN(B, 4), GPIO_INPUT)				/* EC_I2C_POWER_SDA */
+GPIO(I2C1_SCL,			PIN(9, 0), GPIO_INPUT)				/* EC_I2C_USB_C0_PD_SCL */
+GPIO(I2C1_SDA,			PIN(8, 7), GPIO_INPUT)				/* EC_I2C_USB_C0_PD_SDA */
+GPIO(I2C2_SCL,			PIN(9, 2), GPIO_INPUT)				/* EC_I2C_USB_C1_PD_SCL */
+GPIO(I2C2_SDA,			PIN(9, 1), GPIO_INPUT)				/* EC_I2C_USB_C1_PD_SDA */
+GPIO(I2C3_SCL,			PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V)		/* APU_SIC */
+GPIO(I2C3_SDA,			PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V)		/* APU_SID */
+GPIO(I2C5_SCL,			PIN(3, 3), GPIO_INPUT)				/* EC_I2C_EEPROM_SCL and
+										   EC_I2C_KB_BL_SCL */
+GPIO(I2C5_SDA,			PIN(3, 6), GPIO_INPUT)				/* EC_I2C_EEPROM_SDA and
+										   EC_I2C_KB_BL_SDA */
+GPIO(I2C7_SCL,			PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SCL */
+GPIO(I2C7_SDA,			PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SDA */
+
+/*
+ * The NPCX LPC driver configures and controls SCI and SMI,
+ * so PCH_SCI_ODL [PIN(7, 6)] and PCH_SMI_ODL [PIN(C, 6)] are
+ * not defined here as GPIOs.
+ */
+
+GPIO(EN_USB_A0_5V,		PIN(6, 1), GPIO_OUT_LOW)			/* Enable A0 5V Charging */
+GPIO(EN_USB_A1_5V,		PIN(C, 0), GPIO_OUT_LOW)			/* Enable A1 5V Charging */
+GPIO(EN_USB_C0_TCPC_PWR,	PIN(6, 0), GPIO_OUT_LOW)			/* Enable C0 TCPC Power */
+GPIO(USB_C0_OC_L,		PIN(7, 3), GPIO_OUT_HIGH)			/* C0 Over Current */
+GPIO(USB_C1_OC_L,		PIN(7, 2), GPIO_OUT_HIGH)			/* C1 Over Current */
+GPIO(USB_C0_PD_RST_L,		PIN(3, 2), GPIO_OUT_HIGH)			/* C0 PD Reset */
+GPIO(USB_C1_PD_RST_L,		PIN(D, 5), GPIO_OUT_HIGH)			/* C1 PD Reset */
+GPIO(USB_C0_BC12_VBUS_ON_L,	PIN(4, 0), GPIO_ODR_HIGH)			/* C0 BC1.2 Power */
+GPIO(USB_C1_BC12_VBUS_ON_L,	PIN(B, 1), GPIO_ODR_HIGH | GPIO_PULL_UP)	/* C1 BC1.2 Power */
+GPIO(USB_C0_BC12_CHG_DET,	PIN(6, 2), GPIO_INPUT)				/* C0 BC1.2 Detect */
+GPIO(USB_C1_BC12_CHG_DET,	PIN(8, 3), GPIO_INPUT | GPIO_PULL_DOWN)		/* C1 BC1.2 Detect */
+GPIO(USB_C0_DP_HPD,		PIN(9, 5), GPIO_OUT_LOW)			/* C0 DP Hotplug Detect */
+GPIO(USB_C1_DP_HPD,		PIN(9, 6), GPIO_OUT_LOW)			/* C1 DP Hotplug Detect */
+
+/* Board ID */
+GPIO(BOARD_VERSION1,		PIN(C, 7), GPIO_INPUT)
+GPIO(BOARD_VERSION2,		PIN(9, 3), GPIO_INPUT)
+GPIO(BOARD_VERSION3,		PIN(8, 0), GPIO_INPUT)
+GPIO(SKU_ID1,			PIN(F, 0), GPIO_INPUT)
+GPIO(SKU_ID2,			PIN(4, 1), GPIO_INPUT)
+
+/* LED */
+GPIO(BAT_LED_1_L,	 PIN(C, 3), GPIO_OUT_HIGH)
+GPIO(BAT_LED_2_L,	 PIN(C, 4), GPIO_OUT_HIGH)
+
+/* Alternate functions GPIO definitions */
+/* Cr50 requires no pull-ups on UART pins. */
+ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)					/* UART from EC to Servo */
+ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0)					/* I2C0 */
+ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0)					/* I2C1 SCL / I2C2 */
+ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0)					/* I2C1 SDA */
+ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0)					/* I2C3 */
+ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0)					/* I2C5 */
+ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0)					/* I2C7 */
+ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0)					/* ADC0-1 */
+ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0)					/* ADC4 */
+ALTERNATE(PIN_MASK(F, 0x02), 0, MODULE_ADC, 0)					/* ADC8 */
+ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0)					/* ADC9 */
+ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0)					/* KB Backlight */
+
+/* Keyboard Pins */
+ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_00-01 */
+ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_02-07 */
+ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_00-01 */
+GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW)						/* KSO_02 inverted */
+ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_03-09 */
+ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_10-12 */
+
+/* Power Switch Logic (PSL) inputs */
+ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0)					/* GPIO00 = AC_PRESENT,
+										   GPIO01 = POWER_BUTTON_L,
+										   GPIO02 = EC_RST_ODL */
+ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0)					/* GPIOD2 = LID_OPEN */
diff --git a/board/treeya/led.c b/board/treeya/led.c
new file mode 100644
index 0000000000..3431717d4b
--- /dev/null
+++ b/board/treeya/led.c
@@ -0,0 +1,101 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#include "common.h"
+#include "led_onoff_states.h"
+#include "led_common.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "console.h"
+
+#define CPRINTS(format, args...) cprints(CC_HOOK, format, ## args)
+
+#define LED_OFF_LVL	1
+#define LED_ON_LVL	0
+
+const int led_charge_lvl_1;
+
+const int led_charge_lvl_2 = 100;
+
+/*
+ *	board_id	others	5, 6
+ *	led1		Amber	Blue
+ *	led2		Blue	Amber
+ */
+static enum gpio_signal led_amber = GPIO_BAT_LED_1_L;
+static enum gpio_signal led_blue = GPIO_BAT_LED_2_L;
+
+/* Note there is only LED for charge / power */
+struct led_descriptor
+			led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
+	[STATE_CHARGING_LVL_2]	     = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
+	[STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_BLUE,  LED_INDEFINITE} },
+	[STATE_DISCHARGE_S0]	     = {{EC_LED_COLOR_BLUE,  LED_INDEFINITE} },
+	[STATE_DISCHARGE_S3]	     = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
+					{LED_OFF,            3 * LED_ONE_SEC} },
+	[STATE_DISCHARGE_S5]         = {{LED_OFF,            LED_INDEFINITE} },
+	[STATE_BATTERY_ERROR]        = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC},
+					{LED_OFF,            1 * LED_ONE_SEC} },
+	[STATE_FACTORY_TEST]         = {{EC_LED_COLOR_BLUE,  2 * LED_ONE_SEC},
+					{EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} },
+};
+
+const enum ec_led_id supported_led_ids[] = { EC_LED_ID_BATTERY_LED };
+
+const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
+
+static void board_led_init(void)
+{
+	int board_id =
+		(gpio_get_level(GPIO_BOARD_VERSION3) << 2) |
+		(gpio_get_level(GPIO_BOARD_VERSION2) << 1) |
+		(gpio_get_level(GPIO_BOARD_VERSION1) << 0);
+
+	CPRINTS("board_id=%d", board_id);
+
+	if ((board_id == 5) || (board_id == 6)) {
+		led_amber = GPIO_BAT_LED_2_L;
+		led_blue = GPIO_BAT_LED_1_L;
+		CPRINTS("LED: switch LED");
+	}
+
+}
+DECLARE_HOOK(HOOK_INIT, board_led_init, HOOK_PRIO_DEFAULT);
+
+void led_set_color_battery(enum ec_led_colors color)
+{
+	switch (color) {
+	case EC_LED_COLOR_BLUE:
+		gpio_set_level(led_blue, LED_ON_LVL);
+		gpio_set_level(led_amber, LED_OFF_LVL);
+		break;
+	case EC_LED_COLOR_AMBER:
+		gpio_set_level(led_blue, LED_OFF_LVL);
+		gpio_set_level(led_amber, LED_ON_LVL);
+		break;
+	default: /* LED_OFF and other unsupported colors */
+		gpio_set_level(led_blue, LED_OFF_LVL);
+		gpio_set_level(led_amber, LED_OFF_LVL);
+		break;
+	}
+}
+
+void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
+{
+	brightness_range[EC_LED_COLOR_BLUE] = 1;
+	brightness_range[EC_LED_COLOR_AMBER] = 1;
+}
+
+int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
+{
+	if (brightness[EC_LED_COLOR_BLUE] != 0)
+		led_set_color_battery(EC_LED_COLOR_BLUE);
+	else if (brightness[EC_LED_COLOR_AMBER] != 0)
+		led_set_color_battery(EC_LED_COLOR_AMBER);
+	else
+		led_set_color_battery(LED_OFF);
+
+	return EC_SUCCESS;
+}