copano: Remove ALS function dependent on schematic.

Remove ALS function dependent on schematic.

BUG=b:175932175
BRANCH=firmware-volteer-13521.B
TEST=make BOARD=copano

Signed-off-by: Jacky Wang <jacky5_wang@pegatron.corp-partner.google.com>
Change-Id: Ide29770b6eb34b60d35daad00fed1c798b4676da
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2598300
Reviewed-by: Michael5 Chen <michael5_chen1@pegatron.corp-partner.google.com>
Reviewed-by: Keith Short <keithshort@chromium.org>
(cherry picked from commit 453c5bca2181c26697042ff0512ab045cc46f338)
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2600698
Tested-by: Michael5 Chen <michael5_chen1@pegatron.corp-partner.google.com>
Commit-Queue: Zhuohao Lee <zhuohao@chromium.org>

4 files changed, 5 insertions, 113 deletions

diff --git a/board/copano/board.c b/board/copano/board.c
index 2f5dcc7c51..9286f239b0 100644
--- a/board/copano/board.c
+++ b/board/copano/board.c
@@ -12,7 +12,6 @@
 #include "driver/accel_bma2x2.h"
 #include "driver/accelgyro_bmi260.h"
 #include "driver/bc12/pi3usb9201.h"
-#include "driver/als_tcs3400.h"
 #include "driver/ppc/syv682x.h"
 #include "driver/tcpm/tcpci.h"
 #include "driver/tcpm/rt1715.h"
diff --git a/board/copano/board.h b/board/copano/board.h
index 41c0fc4ef0..e19a7314fb 100644
--- a/board/copano/board.h
+++ b/board/copano/board.h
@@ -43,16 +43,8 @@
 #define CONFIG_ACCELGYRO_BMI260_INT_EVENT \
 	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
 
-/* TCS3400 ALS */
-#define CONFIG_ALS
-#define ALS_COUNT		1
-#define CONFIG_ALS_TCS3400
-#define CONFIG_ALS_TCS3400_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
-
 /* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	(BIT(LID_ACCEL) | BIT(CLEAR_ALS))
+#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
 
 #define CONFIG_LID_ANGLE
 #define CONFIG_LID_ANGLE_UPDATE
@@ -179,8 +171,6 @@ enum sensor_id {
 	LID_ACCEL = 0,
 	BASE_ACCEL,
 	BASE_GYRO,
-	CLEAR_ALS,
-	RGB_ALS,
 	SENSOR_COUNT,
 };
 
diff --git a/board/copano/gpio.inc b/board/copano/gpio.inc
index 6208874533..5d60de45c3 100644
--- a/board/copano/gpio.inc
+++ b/board/copano/gpio.inc
@@ -26,7 +26,6 @@ GPIO_INT(PG_EC_ALL_SYS_PWRGD,  PIN(F, 4),  GPIO_INT_BOTH, power_signal_interrupt
 
 /* Sensor Interrupts */
 GPIO_INT(EC_IMU_INT_L,         PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi260_interrupt)
-GPIO_INT(EC_ALS_RGB_INT_L,     PIN(D, 4), GPIO_INT_FALLING, tcs3400_interrupt)
 GPIO_INT(TABLET_MODE_L,        PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
 
 /* USB-C interrupts */
@@ -168,3 +167,7 @@ ALTERNATE(PIN_MASK(0, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_PMU, 0)  /* GPIO00 =
 /* Temperature sensors */
 ALTERNATE(PIN_MASK(4, BIT(2) | BIT(4) | BIT(5)), 0, MODULE_ADC, 0) /* TEMP_SENSOR1,2,4 */
 ALTERNATE(PIN(F, 1), 0, MODULE_ADC, 0) /* TEMP_SENSOR3 */
+
+/* Unused signals */
+GPIO(UNUSED_GPIOD4,		PIN(D, 4), GPIO_INPUT | GPIO_PULL_UP)
+
diff --git a/board/copano/sensors.c b/board/copano/sensors.c
index 9e34812131..8e2db059d6 100644
--- a/board/copano/sensors.c
+++ b/board/copano/sensors.c
@@ -9,7 +9,6 @@
 #include "driver/accel_bma2x2.h"
 #include "driver/accelgyro_bmi_common.h"
 #include "driver/accelgyro_bmi260.h"
-#include "driver/als_tcs3400.h"
 #include "driver/sync.h"
 #include "keyboard_scan.h"
 #include "hooks.h"
@@ -29,60 +28,6 @@ static struct accelgyro_saved_data_t g_bma253_data;
 /* BMI260 private data */
 static struct bmi_drv_data_t g_bmi260_data;
 
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-/*
- * TODO: b/146166425 need to calibrate ALS/RGB sensor. At default settings,
- * shining phone flashlight on sensor pegs all readings at 0xFFFF.
- */
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
 /* Rotation matrix for the lid accelerometer */
 static const mat33_fp_t lid_standard_ref = {
 	{ FLOAT_TO_FP(1), 0, 0},
@@ -168,58 +113,13 @@ struct motion_sensor_t motion_sensors[] = {
 		.min_frequency = BMI_GYRO_MIN_FREQ,
 		.max_frequency = BMI_GYRO_MAX_FREQ,
 	},
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
 };
 unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
 
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
 static void baseboard_sensors_init(void)
 {
 	/* Note - BMA253 interrupt unused by EC */
 
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_L);
 	/* Enable interrupt for the BMI260 accel/gyro sensor */
 	gpio_enable_interrupt(GPIO_EC_IMU_INT_L);
 }