board: caroline: indent motion_sense arrary

Replace ' ' in tabs, remove setting to 0.

BUG=none
TEST=compile
BRANCH=glados

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Change-Id: I68c21db1a4fa1140b2e782ceeef4079775222f9f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3200805
Reviewed-by: Stefan Reinauer <reinauer@google.com>

1 files changed, 83 insertions, 142 deletions

diff --git a/board/caroline/board.c b/board/caroline/board.c
index f93e0daaf8..27f5989250 100644
--- a/board/caroline/board.c
+++ b/board/caroline/board.c
@@ -510,153 +510,94 @@ const matrix_3x3_t lid_standard_ref = {
 
 struct motion_sensor_t motion_sensors[] = {
 	[LID_ACCEL] = {
-	 .name = "Lid Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMA255,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_LID,
-	 .drv = &bma2x2_accel_drv,
-	 .mutex = &g_lid_mutex,
-	 .drv_data = &g_bma255_data,
-	 .addr = BMA2x2_I2C_ADDR1,
-	 .rot_standard_ref = &lid_standard_ref,
-	 .default_range = 8, /* g, to support tablet mode */
-	 .min_frequency = BMA255_ACCEL_MIN_FREQ,
-	 .max_frequency = BMA255_ACCEL_MAX_FREQ,
-	 .config = {
-		/* AP: by default use EC settings */
-		[SENSOR_CONFIG_AP] = {
-			.odr = 0,
-			.ec_rate = 0,
+		.name = "Lid Accel",
+		.active_mask = SENSOR_ACTIVE_S0_S3,
+		.chip = MOTIONSENSE_CHIP_BMA255,
+		.type = MOTIONSENSE_TYPE_ACCEL,
+		.location = MOTIONSENSE_LOC_LID,
+		.drv = &bma2x2_accel_drv,
+		.mutex = &g_lid_mutex,
+		.drv_data = &g_bma255_data,
+		.addr = BMA2x2_I2C_ADDR1,
+		.rot_standard_ref = &lid_standard_ref,
+		.default_range = 8, /* g, to support tablet mode */
+		.min_frequency = BMA255_ACCEL_MIN_FREQ,
+		.max_frequency = BMA255_ACCEL_MAX_FREQ,
+		.config = {
+			/* EC use accel for angle detection */
+			[SENSOR_CONFIG_EC_S0] = {
+				.odr = 10000 | ROUND_UP_FLAG,
+				.ec_rate = 100 * MSEC,
+			},
+			/* Sensor on in S3 */
+			[SENSOR_CONFIG_EC_S3] = {
+				.odr = 10000 | ROUND_UP_FLAG,
+				.ec_rate = 100 * MSEC,
+			},
 		},
-		/* EC use accel for angle detection */
-		[SENSOR_CONFIG_EC_S0] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-		/* Sensor on in S3 */
-		[SENSOR_CONFIG_EC_S3] = {
-			.odr = 10000 | ROUND_UP_FLAG,
-			.ec_rate = 100 * MSEC,
-		},
-		/* Sensor off in S5 */
-		[SENSOR_CONFIG_EC_S5] = {
-			.odr = 0,
-			.ec_rate = 0,
-		},
-	 },
 	},
-
 	[BASE_ACCEL] = {
-	 .name = "Base Accel",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_ACCEL,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .addr = BMI160_ADDR0,
-	 .rot_standard_ref = &base_standard_ref,
-	 .default_range = 8, /* g, to support tablet mode  */
-	 .min_frequency = BMI160_ACCEL_MIN_FREQ,
-	 .max_frequency = BMI160_ACCEL_MAX_FREQ,
-	 .config = {
-		 /* AP: by default use EC settings */
-		 [SENSOR_CONFIG_AP] = {
-			 .odr = 0,
-			 .ec_rate = 0,
-		 },
-		 /* EC use accel for angle detection */
-		 [SENSOR_CONFIG_EC_S0] = {
-			 .odr = 10000 | ROUND_UP_FLAG,
-			 .ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor on in S3 */
-		 [SENSOR_CONFIG_EC_S3] = {
-			 .odr = 10000 | ROUND_UP_FLAG,
-			 .ec_rate = 100 * MSEC,
-		 },
-		 /* Sensor off in S5 */
-		 [SENSOR_CONFIG_EC_S5] = {
-			 .odr = 0,
-			 .ec_rate = 0
-		 },
-	 },
+		.name = "Base Accel",
+		.active_mask = SENSOR_ACTIVE_S0_S3,
+		.chip = MOTIONSENSE_CHIP_BMI160,
+		.type = MOTIONSENSE_TYPE_ACCEL,
+		.location = MOTIONSENSE_LOC_BASE,
+		.drv = &bmi160_drv,
+		.mutex = &g_base_mutex,
+		.drv_data = &g_bmi160_data,
+		.addr = BMI160_ADDR0,
+		.rot_standard_ref = &base_standard_ref,
+		.default_range = 8, /* g, to support tablet mode  */
+		.min_frequency = BMI160_ACCEL_MIN_FREQ,
+		.max_frequency = BMI160_ACCEL_MAX_FREQ,
+		.config = {
+			/* EC use accel for angle detection */
+			[SENSOR_CONFIG_EC_S0] = {
+				.odr = 10000 | ROUND_UP_FLAG,
+				.ec_rate = 100 * MSEC,
+			},
+			/* Sensor on in S3 */
+			[SENSOR_CONFIG_EC_S3] = {
+				.odr = 10000 | ROUND_UP_FLAG,
+				.ec_rate = 100 * MSEC,
+			},
+		},
 	},
-
 	[BASE_GYRO] = {
-	 .name = "Base Gyro",
-	 .active_mask = SENSOR_ACTIVE_S0_S3,
-	 .chip = MOTIONSENSE_CHIP_BMI160,
-	 .type = MOTIONSENSE_TYPE_GYRO,
-	 .location = MOTIONSENSE_LOC_BASE,
-	 .drv = &bmi160_drv,
-	 .mutex = &g_base_mutex,
-	 .drv_data = &g_bmi160_data,
-	 .addr = BMI160_ADDR0,
-	 .default_range = 1000, /* dps */
-	 .rot_standard_ref = &base_standard_ref,
-	 .min_frequency = BMI160_GYRO_MIN_FREQ,
-	 .max_frequency = BMI160_GYRO_MAX_FREQ,
-	 .config = {
-		 /* AP: by default shutdown all sensors */
-		 [SENSOR_CONFIG_AP] = {
-			 .odr = 0,
-			 .ec_rate = 0,
-		 },
-		 /* EC does not need in S0 */
-		 [SENSOR_CONFIG_EC_S0] = {
-			 .odr = 0,
-			 .ec_rate = 0,
-		 },
-		 /* Sensor off in S3/S5 */
-		 [SENSOR_CONFIG_EC_S3] = {
-			 .odr = 0,
-			 .ec_rate = 0,
-		 },
-		 /* Sensor off in S3/S5 */
-		 [SENSOR_CONFIG_EC_S5] = {
-			 .odr = 0,
-			 .ec_rate = 0,
-		 },
-	 },
+		.name = "Base Gyro",
+		.active_mask = SENSOR_ACTIVE_S0_S3,
+		.chip = MOTIONSENSE_CHIP_BMI160,
+		.type = MOTIONSENSE_TYPE_GYRO,
+		.location = MOTIONSENSE_LOC_BASE,
+		.drv = &bmi160_drv,
+		.mutex = &g_base_mutex,
+		.drv_data = &g_bmi160_data,
+		.addr = BMI160_ADDR0,
+		.default_range = 1000, /* dps */
+		.rot_standard_ref = &base_standard_ref,
+		.min_frequency = BMI160_GYRO_MIN_FREQ,
+		.max_frequency = BMI160_GYRO_MAX_FREQ,
+	},
+	[LID_ALS] = {
+		.name = "Light",
+		.active_mask = SENSOR_ACTIVE_S0,
+		.chip = MOTIONSENSE_CHIP_BH1730,
+		.type = MOTIONSENSE_TYPE_LIGHT,
+		.location = MOTIONSENSE_LOC_LID,
+		.drv = &bh1730_drv,
+		.drv_data = &g_bh1730_data,
+		.addr = BH1730_I2C_ADDR,
+		.rot_standard_ref = NULL,
+		.default_range = 65535,
+		.min_frequency = 10,
+		.max_frequency = 10,
+		.config = {
+			[SENSOR_CONFIG_EC_S0] = {
+				.odr = 100000,
+				.ec_rate = 0,
+			},
+		},
 	},
-        [LID_ALS] = {
-         .name = "Light",
-         .active_mask = SENSOR_ACTIVE_S0,
-         .chip = MOTIONSENSE_CHIP_BH1730,
-         .type = MOTIONSENSE_TYPE_LIGHT,
-         .location = MOTIONSENSE_LOC_LID,
-         .drv = &bh1730_drv,
-         .drv_data = &g_bh1730_data,
-         .addr = BH1730_I2C_ADDR,
-         .rot_standard_ref = NULL,
-         .default_range = 65535,
-         .min_frequency = 10,
-         .max_frequency = 10,
-         .config = {
-                /* AP: by default shutdown all sensors */
-                [SENSOR_CONFIG_AP] = {
-                        .odr = 0,
-                        .ec_rate = 0,
-                },
-                [SENSOR_CONFIG_EC_S0] = {
-                        .odr = 100000,
-                        .ec_rate = 0,
-                },
-                /* Sensor off in S3/S5 */
-                [SENSOR_CONFIG_EC_S3] = {
-                        .odr = 0,
-                        .ec_rate = 0,
-                },
-                /* Sensor off in S3/S5 */
-                [SENSOR_CONFIG_EC_S5] = {
-                        .odr = 0,
-                        .ec_rate = 0,
-                },
-         },
-        },
 };
 
 #ifdef CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
@@ -667,7 +608,7 @@ const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
 
 /* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
 const struct motion_sensor_t *motion_als_sensors[] = {
-        &motion_sensors[LID_ALS],
+	&motion_sensors[LID_ALS],
 };
 BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
 #endif /* HAS_TASK_MOTIONSENSE */