eve: Use PCH ACOK signal to control Deep Sleep entry

Deep Sleep states (DS3, DS5) are a special mode of the Intel PCH chipset
that has very limited wake capabilities and breaks a number of common
user expected behahviors.

In particular, when in Deep S3 the USB ports are turned off and cannot
continue to charge, wake the system, or maintain their internal state
as they will lose 5V power.  This is particularly painful with gnubby
devices as they will need unlocked after every DS3 suspend/resume cycle.

The only external signal that the PCH uses to determine whether or not
to enter Deep Sx states is the ACPRESENT (aka ACOK) pin.

Currently this pin is simply buffered from the charger and will be
asserted whenever a charger is connected.  This change extends the EC
control over the pin to also assert ACPRESENT if either Type-C port is
currently supplying VBUS.

Now when a USB device is inserted the system will be enter S3 state,
but not go into Deep S3 state.  This allows the USB device to continue
to charge, maintain it's internal state, and wake the system.

BUG=b:64406191
BRANCH=eve
TEST=verify GPIO_PCH_ACOK pin from the EC in different scenarios and
test that system goes into S3 or DS3 state as expected:
1) no charger, no USB device: ACOK not asserted, DS3 enabled
2) charger but no USB device: ACOK asserted, DS3 disabled
3) no charger but USB device: ACOK asserted, DS3 disabled
4) charger and USB device:    ACOK asserted, DS3 disabled

Change-Id: I1cd132459194382e418970d29b1b195d8132cfad
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://chromium-review.googlesource.com/914660

3 files changed, 22 insertions, 11 deletions

diff --git a/board/eve/board.c b/board/eve/board.c
index 27d086bbd0..725da656c7 100644
--- a/board/eve/board.c
+++ b/board/eve/board.c
@@ -466,6 +466,19 @@ int board_has_working_reset_flags(void)
 	return 1;
 }
 
+/*
+ * Update status of the ACPRESENT pin on the PCH.  In order to prevent
+ * Deep S3 when USB is inserted this will indicate that AC is present
+ * if either port is supplying VBUS or there an external charger present.
+ */
+void board_update_ac_status(void)
+{
+	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present() ||
+		       board_vbus_source_enabled(0) ||
+		       board_vbus_source_enabled(1));
+}
+DECLARE_HOOK(HOOK_AC_CHANGE, board_update_ac_status, HOOK_PRIO_DEFAULT);
+
 /* Initialize board. */
 static void board_init(void)
 {
@@ -481,8 +494,8 @@ static void board_init(void)
 	/* Enable interrupts from BMI160 sensor. */
 	gpio_enable_interrupt(GPIO_ACCELGYRO3_INT_L);
 
-	/* Provide AC status to the PCH */
-	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present());
+	/* Update AC status to the PCH */
+	board_update_ac_status();
 
 #if defined(CONFIG_KEYBOARD_SCANCODE_MUTABLE) && !defined(TEST_BUILD)
 	if (board_get_version() == BOARD_VERSION_EVT) {
@@ -495,15 +508,6 @@ static void board_init(void)
 }
 DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
 
-/**
- * Buffer the AC present GPIO to the PCH.
- */
-static void board_extpower(void)
-{
-	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present());
-}
-DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT);
-
 int pd_snk_is_vbus_provided(int port)
 {
 	if (port != 0 && port != 1)
diff --git a/board/eve/board.h b/board/eve/board.h
index e8ada25703..7441b07d39 100644
--- a/board/eve/board.h
+++ b/board/eve/board.h
@@ -309,6 +309,7 @@ void board_reset_pd_mcu(void);
 void board_set_tcpc_power_mode(int port, int mode);
 void board_tcpc_init(void);
 void led_register_double_tap(void);
+void board_update_ac_status(void);
 
 /* Sensors without hardware FIFO are in forced mode */
 #define CONFIG_ACCEL_FORCE_MODE_MASK ((1 << LID_ACCEL) | (1 << LID_LIGHT))
diff --git a/board/eve/usb_pd_policy.c b/board/eve/usb_pd_policy.c
index 15088d153b..cdb2bc9b78 100644
--- a/board/eve/usb_pd_policy.c
+++ b/board/eve/usb_pd_policy.c
@@ -125,6 +125,9 @@ int pd_set_power_supply_ready(int port)
 	/* notify host of power info change */
 	pd_send_host_event(PD_EVENT_POWER_CHANGE);
 
+	/* Update AC status to the PCH */
+	board_update_ac_status();
+
 	return EC_SUCCESS; /* we are ready */
 }
 
@@ -147,6 +150,9 @@ void pd_power_supply_reset(int port)
 
 	/* notify host of power info change */
 	pd_send_host_event(PD_EVENT_POWER_CHANGE);
+
+	/* Update AC status to the PCH */
+	board_update_ac_status();
 }
 
 int pd_board_checks(void)