path: root/plat/hisilicon/hikey960/hikey960_bl31_setup.c

/*
 * Copyright (c) 2017-2023, Arm Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <assert.h>
#include <errno.h>

#include <platform_def.h>

#include <arch_helpers.h>
#include <bl31/interrupt_mgmt.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/interrupt_props.h>
#include <drivers/arm/cci.h>
#include <drivers/arm/gicv2.h>
#include <drivers/arm/pl011.h>
#include <drivers/console.h>
#include <drivers/generic_delay_timer.h>
#include <lib/mmio.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <plat/common/platform.h>
#include <services/el3_spmc_ffa_memory.h>

#include <hi3660.h>
#include <hisi_ipc.h>
#include "hikey960_def.h"
#include "hikey960_private.h"

static entry_point_info_t bl32_ep_info;
static entry_point_info_t bl33_ep_info;
static console_t console;

/* fastboot serial number consumed by Kinibi SPD/LP for gpd.tee.deviceID. */
uint64_t fastboot_serno;

/******************************************************************************
 * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
 * interrupts.
 *****************************************************************************/
static const interrupt_prop_t g0_interrupt_props[] = {
	INTR_PROP_DESC(IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY,
		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
	INTR_PROP_DESC(IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY,
		       GICV2_INTR_GROUP0, GIC_INTR_CFG_LEVEL),
};

const gicv2_driver_data_t hikey960_gic_data = {
	.gicd_base = GICD_REG_BASE,
	.gicc_base = GICC_REG_BASE,
	.interrupt_props = g0_interrupt_props,
	.interrupt_props_num = ARRAY_SIZE(g0_interrupt_props),
};

static const int cci_map[] = {
	CCI400_SL_IFACE3_CLUSTER_IX,
	CCI400_SL_IFACE4_CLUSTER_IX
};

entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
	entry_point_info_t *next_image_info;

	next_image_info = (type == NON_SECURE) ? &bl33_ep_info : &bl32_ep_info;

	/* None of the images on this platform can have 0x0 as the entrypoint */
	if (next_image_info->pc)
		return next_image_info;
	return NULL;
}

void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
				u_register_t arg2, u_register_t arg3)
{
	unsigned int id, uart_base;
	void *from_bl2;
	plat_params_from_bl2_t *plat_params_from_bl2 = (plat_params_from_bl2_t *) arg1;

	from_bl2 = (void *) arg0;

	generic_delay_timer_init();
	hikey960_read_boardid(&id);
	if (id == 5300)
		uart_base = PL011_UART5_BASE;
	else
		uart_base = PL011_UART6_BASE;

	/* Initialize the console to provide early debug support */
	console_pl011_register(uart_base, PL011_UART_CLK_IN_HZ,
			       PL011_BAUDRATE, &console);

	/* Initialize CCI driver */
	cci_init(CCI400_REG_BASE, cci_map, ARRAY_SIZE(cci_map));
	cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr_el1()));

	/* Fastboot serial number passed from BL2 as a platform parameter */
	fastboot_serno = plat_params_from_bl2->fastboot_serno;
	INFO("BL31: fastboot_serno %lx\n", fastboot_serno);

	/*
	 * Check params passed from BL2 should not be NULL,
	 */
	bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
	assert(params_from_bl2 != NULL);
	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
	assert(params_from_bl2->h.version >= VERSION_2);

	bl_params_node_t *bl_params = params_from_bl2->head;

	/*
	 * Copy BL33 and BL32 (if present), entry point information.
	 * They are stored in Secure RAM, in BL2's address space.
	 */
	while (bl_params) {
		if (bl_params->image_id == BL32_IMAGE_ID)
			bl32_ep_info = *bl_params->ep_info;

		if (bl_params->image_id == BL33_IMAGE_ID)
			bl33_ep_info = *bl_params->ep_info;

		bl_params = bl_params->next_params_info;
	}

	if (bl33_ep_info.pc == 0)
		panic();
}

void bl31_plat_arch_setup(void)
{
#if SPMC_AT_EL3
	mmap_add_region(DDR2_SEC_BASE, DDR2_SEC_BASE, DDR2_SEC_SIZE,
	       MT_MEMORY | MT_RW | MT_SECURE);
#endif

	hikey960_init_mmu_el3(BL31_BASE,
			BL31_LIMIT - BL31_BASE,
			BL_CODE_BASE,
			BL_CODE_END,
			BL_COHERENT_RAM_BASE,
			BL_COHERENT_RAM_END);
}

static void hikey960_edma_init(void)
{
	int i;
	uint32_t non_secure;

	non_secure = EDMAC_SEC_CTRL_INTR_SEC | EDMAC_SEC_CTRL_GLOBAL_SEC;
	mmio_write_32(EDMAC_SEC_CTRL, non_secure);

	/* Channel 0 is reserved for LPM3, keep secure */
	for (i = 1; i < EDMAC_CHANNEL_NUMS; i++) {
		mmio_write_32(EDMAC_AXI_CONF(i), (1 << 6) | (1 << 18));
	}
}

static void hikey960_iomcu_dma_init(void)
{
	int i;
	uint32_t non_secure;

	non_secure = IOMCU_DMAC_SEC_CTRL_INTR_SEC | IOMCU_DMAC_SEC_CTRL_GLOBAL_SEC;
	mmio_write_32(IOMCU_DMAC_SEC_CTRL, non_secure);

	/* channels 0-3 are reserved */
	for (i = 4; i < IOMCU_DMAC_CHANNEL_NUMS; i++) {
		mmio_write_32(IOMCU_DMAC_AXI_CONF(i), IOMCU_DMAC_AXI_CONF_ARPROT_NS |
				 IOMCU_DMAC_AXI_CONF_AWPROT_NS);
	}
}

#if SPMC_AT_EL3
/*
 * On the hikey960 platform when using the EL3 SPMC implementation allocate the
 * datastore for tracking shared memory descriptors in the RAM2 DRAM section
 * to ensure sufficient storage can be allocated.
 * Provide an implementation of the accessor method to allow the datastore
 * details to be retrieved by the SPMC.
 * The SPMC will take care of initializing the memory region.
 */

#define SPMC_SHARED_MEMORY_OBJ_SIZE (512 * 1024)

__section(".ram2_region") uint8_t plat_spmc_shmem_datastore[SPMC_SHARED_MEMORY_OBJ_SIZE];

int plat_spmc_shmem_datastore_get(uint8_t **datastore, size_t *size)
{
	*datastore = plat_spmc_shmem_datastore;
	*size = SPMC_SHARED_MEMORY_OBJ_SIZE;
	return 0;
}

/*
 * Add dummy implementations of memory management related platform hooks.
 * These can be used to implement platform specific functionality to support
 * a memory sharing/lending operation.
 *
 * Note: The hooks must be located as part of the initial share request and
 * final reclaim to prevent order dependencies with operations that may take
 * place in the normal world without visibility of the SPMC.
 */
int plat_spmc_shmem_begin(struct ffa_mtd *desc)
{
	return 0;
}

int plat_spmc_shmem_reclaim(struct ffa_mtd *desc)
{
	return 0;
}

#endif

void bl31_platform_setup(void)
{
	/* Initialize the GIC driver, cpu and distributor interfaces */
	gicv2_driver_init(&hikey960_gic_data);
	gicv2_distif_init();
	gicv2_pcpu_distif_init();
	gicv2_cpuif_enable();

	hikey960_edma_init();
	hikey960_iomcu_dma_init();
	hikey960_gpio_init();

	hisi_ipc_init();
}

#ifdef SPD_none
static uint64_t hikey_debug_fiq_handler(uint32_t id,
					uint32_t flags,
					void *handle,
					void *cookie)
{
	int intr, intr_raw;

	/* Acknowledge interrupt */
	intr_raw = plat_ic_acknowledge_interrupt();
	intr = plat_ic_get_interrupt_id(intr_raw);
	ERROR("Invalid interrupt: intr=%d\n", intr);
	console_flush();
	panic();

	return 0;
}
#elif defined(SPD_spmd) && (SPMD_SPM_AT_SEL2 == 1)
/*
 * A dummy implementation of the platform handler for Group0 secure interrupt.
 */
int plat_spmd_handle_group0_interrupt(uint32_t intid)
{
	(void)intid;
	return -1;
}
#endif

void bl31_plat_runtime_setup(void)
{
#ifdef SPD_none
	uint32_t flags;
	int32_t rc;

	flags = 0;
	set_interrupt_rm_flag(flags, NON_SECURE);
	rc = register_interrupt_type_handler(INTR_TYPE_S_EL1,
					     hikey_debug_fiq_handler,
					     flags);
	if (rc != 0)
		panic();
#endif
}