diff options
Diffstat (limited to 'gdb/testsuite/gdb.base/crossload.exp')
| -rw-r--r-- | gdb/testsuite/gdb.base/crossload.exp | 380 |
1 files changed, 0 insertions, 380 deletions
diff --git a/gdb/testsuite/gdb.base/crossload.exp b/gdb/testsuite/gdb.base/crossload.exp deleted file mode 100644 index 26bb7a1b0b2..00000000000 --- a/gdb/testsuite/gdb.base/crossload.exp +++ /dev/null @@ -1,380 +0,0 @@ -# Copyright (C) 1992, 1997 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu - -# This file was written by Fred Fish. (fnf@cygnus.com) -# Rob Savoye changed it to use gdb_test (rob@cygnus.com) - -if $tracelevel then { - strace $tracelevel -} - -set prms_id 0 -set bug_id 0 - -# FIXME: The configure.in for this test should look for --with-targets -# and deal accordingly. Until that has been done, skip the whole thing. -# With a minimal bfd (the default), few if any of these tests work. - -verbose "FIXME: all the crossload tests ignored" -return - -foreach i "m68k-elf m68k-aout m68k-aout2 mips-ecoff i486-elf sparc-aout i860-elf sparc-elf" { - remote_exec build "cd ${objdir}/${subdir} ; uudecode ${srcdir}/${subdir}/$i.u " -} - -# FIXME: These tests don't work for the i960, because -# bfd/config/i960-bout.mt sets SELECT_VECS. I could use setup_xfail -# for each test, but rebooting the board between each one takes a long -# time so I'm just punting the whole file. -if [istarget "i960-*-*"] then { - if $verbose>1 then { - warning "FIXME: crossload test case doesn't run on the i960." - } - continue -} - -# FIXME: These tests don't work for the a29k, because SELECT_VECS is -# used when compiling bfd. It would be nice if there were some better -# way of detecting this case. -if [istarget "a29k-*-*"] then { - if $verbose>1 then { - warning "FIXME: crossload test case doesn't run on the a29k." - } - continue -} - -# Test if gdb can automatically determine the bfd format of an -# executable and read it's symbols. - -proc bfddefault {} { - global GDB - global GDBFLAGS - global gdb_prompt - global objdir - global subdir - global binfile - global bfdformat - global file_loaded - - gdb_unload - set file_loaded 0 - send_gdb "file $objdir/$subdir/$binfile\n" - gdb_expect { - -re "A program is being debugged already. Kill it.*y or n." { - send_gdb "y\n" - exp_continue - } - -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$gdb_prompt $" { - pass "$binfile ($bfdformat) auto format" - } - -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+.no debugging symbols found.\[.\]+done\..*$gdb_prompt $" { - pass "$binfile ($bfdformat) auto format (but no symbols found)" - } - -re "File format not recognized.*$gdb_prompt $" { - fail "$binfile ($bfdformat) auto format (format not recognized)" - return - } - -re "File format is ambiguous.*$gdb_prompt $" { - fail "$binfile ($bfdformat) auto format (format is ambiguous)" - return - } - -re "$gdb_prompt $" { - fail "$binfile ($bfdformat) auto format" - return - } - timeout { - fail "(timeout) $binfile ($bfdformat) auto format" - return - } - } - - if [gdb_test "info target" ".*file type $bfdformat" ""]==0 then { - set file_loaded 1 - } else { - fail "$binfile ($bfdformat) wrong format found" - } -} - -# Test if gdb can read symbols from an executable when the bfd format -# is explicitly set via the environment variable GNUTARGET. - -proc bfdexplicit {} { - global GDB - global GDBFLAGS - global gdb_prompt - global subdir - global objdir - global det_file - global binfile - global bfdformat - global file_loaded - - gdb_unload - set file_loaded 0 - - # Once GDB 4.10 (the last to lack `set gnutarget') is forgotten, - # change this to use set gnutarget. - if [gdb_test "set env GNUTARGET=$bfdformat" "" ""]!=0 then { - fail "setting GNUTARGET=$bfdformat in environment" - return - } - - send_gdb "file $objdir/$subdir/$binfile\n" - gdb_expect { - -re "A program is being debugged already. Kill it.*y or n." { - send_gdb "y\n" - exp_continue - } - -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$gdb_prompt $" { - pass "$binfile ($bfdformat) explicit format" - } - -re "Invalid target.*$gdb_prompt $" { - fail "$binfile ($bfdformat) explicit format (invalid target)" - return - } - -re "$gdb_prompt $" { - fail "$binfile ($bfdformat) explicit format" - return - } - timeout { - fail "(timeout) $binfile ($bfdformat) explicit format" - return - } - } - - set file_loaded 1 -} - -proc test_ptype_functions {} { - global gdb_prompt - global binfile - global bfdformat - global det_file - send_gdb "ptype main\n" - gdb_expect { - -re "type = int \[)(\]+\r\n$gdb_prompt $" {} - timeout { fail "(timeout) $binfile ($bfdformat) function main" ; return } - } - - # set up a list of lists of command and patterns - set command [list { "ptype v_char_func" "type =(\ unsigned\ |\ signed\ |\ )char \[)(\]+" }\ - { "ptype v_short_func" "type = (short|short int) \[)(\]+" } \ - { "ptype v_int_func" "type = int \[)(\]+" } \ - { "ptype v_long_func" "type = (long|long int|int) \[)(\]+" } \ - { "ptype v_float_func" "type = float \[)(\]+" } \ - { "ptype v_double_func" "type = double \[)(\]+" } ] - - foreach i $command { - if [gdb_test [lindex $i 0] [lindex $i 1] ""] then { - fail "$binfile ($bfdformat) \"[lindex $i 0]\" function types" - return - } - } - pass "$binfile ($bfdformat) ptype function types" -} - -# Note that plain chars can be either signed or unsigned. - -proc test_ptype_plain_types {} { - global gdb_prompt - global binfile - global bfdformat - - # set up a list of lists of command and patterns - set command [list { "ptype v_char" "type =(\ unsigned\ |\ signed\ |\ )char" }\ - { "ptype v_short" "type = short" } \ - { "ptype v_int" "type = int" } \ - { "ptype v_long" "type = long" } \ - { "ptype v_float" "type = float" } \ - { "ptype v_double" "type = double" } ] - - foreach i $command { - if [gdb_test [lindex $i 0] [lindex $i 1] ""] then { - fail "$binfile ($bfdformat) \"[lindex $i 0]\" plain C types" - return - } - } - pass "$binfile ($bfdformat) ptype plain C types" -} - -# Note that if compiled with pre-ANSI compilers, the "signed" keywords are -# defined away and the variables default to plain types. So accept either. - -proc test_ptype_signed_types {} { - global gdb_prompt - global binfile - global bfdformat - global det_file - - # set up a list of lists of command and patterns - set command [list { "ptype v_signed_char" "type =(\ signed\ |\ )char" }\ - { "ptype v_signed_short" "type =(\ signed\ |\ )short" } \ - { "ptype v_signed_int" "type =(\ signed\ |\ )int" } \ - { "ptype v_signed_long" "type =(\ signed\ |\ )long" } ] - - foreach i $command { - if [gdb_test [lindex $i 0] [lindex $i 1] ""] then { - if [expr [string match "ecoff-bigmips" $bfdformat]+[string match "ptype v_signed_char" [lindex $i 0]]]==2 then { - setup_xfail "*-*-*" - } - fail "$binfile ($bfdformat) \"[lindex $i 0]\" signed C types" - return - } - } - pass "$binfile ($bfdformat) ptype signed C types" -} - -proc test_ptype_unsigned_types {} { - global gdb_prompt - global binfile - global bfdformat - global det_file - - # set up a list of lists of command and patterns - set command [list { "ptype v_unsigned_char" "type = unsigned char" }\ - { "ptype v_unsigned_short" \ - "type = (unsigned short|short unsigned int)" } \ - { "ptype v_unsigned_int" "type = unsigned int" } \ - { "ptype v_unsigned_long" \ - "type = (unsigned long|long unsigned int)" } ] - - foreach i $command { - if [gdb_test [lindex $i 0] [lindex $i 1] ""] then { - fail "$binfile ($bfdformat) \"[lindex $i 0]\" unsigned C types" - return - } - } - pass "$binfile ($bfdformat) ptype unsigned C types" -} - -# Note that plain chars can be either signed or unsigned. - -proc test_ptype_array_types {} { - global gdb_prompt - global binfile - global bfdformat - global det_file - - # set up a list of lists of command and patterns - set command [list { "ptype v_char_array" "type =(\ unsigned\ |\ signed\ |\ )char \\\[2\\\]" }\ - { "ptype v_short_array" \ - "type = (short|short int) \\\[2\\\]" } \ - { "ptype v_int_array" "type = int \\\[2\\\]" } \ - { "ptype v_long_array" "type = (long|long int) \\\[2\\\]" } \ - { "ptype v_float_array" "type = float \\\[2\\\]" } \ - { "ptype v_double_array" "type = double \\\[2\\\]" } ] - - foreach i $command { - if [gdb_test [lindex $i 0] [lindex $i 1] ""] then { - fail "$binfile ($bfdformat) \"[lindex $i 0]\" C array types" - return - } - } - pass "$binfile ($bfdformat) ptype C array types" -} - -proc test_ptype_pointer_types {} { - global gdb_prompt - global binfile - global bfdformat - global det_file - - # set up a list of lists of command and patterns - set command [list { "ptype v_char_pointer" "type =(\ unsigned\ |\ signed\ |\ )char \*" }\ - { "ptype v_short_pointer" "type = (short|short int) \*" } \ - { "ptype v_int_pointer" "type = int \*" } \ - { "ptype v_long_pointer" "type = (long|long int) \*" } \ - { "ptype v_float_pointer" "type = float \*" } \ - { "ptype v_double_pointer" "type = double \*" } ] - - foreach i $command { - if [gdb_test [lindex $i 0] [lindex $i 1] ""] then { - fail "$binfile ($bfdformat) \"[lindex $i 0]\" C pointer types" - return - } - } - pass "$binfile ($bfdformat) ptype C pointer types" -} - -proc loadandtest { args } { - global verbose - global GDB - global GDBFLAGS - global gdb_prompt - global subdir - global objdir - global binfile - global bfdformat - global file_loaded - - set binfile [ lindex $args 0 ] - set bfdformat [ lindex $args 1 ] - set fixme [ lindex $args 2 ] - - if ![file exists $objdir/$subdir/$binfile] then { - perror "$objdir/$subdir/$binfile does not exist" - return 0 - } - gdb_exit - gdb_start - if $fixme then { setup_xfail "*-*-*" } - bfddefault - if $fixme then { setup_xfail "*-*-*" } - if [string match $bfdformat "elf-big"] then { - if [string match $binfile "i860-elf"] then { - setup_xfail "*-*-*" - } - } - bfdexplicit - if $file_loaded==1 then { - test_ptype_functions - if $fixme then { setup_xfail "*-*-*" } - test_ptype_plain_types - if $fixme then { setup_xfail "*-*-*" } - test_ptype_signed_types - if $fixme then { setup_xfail "*-*-*" } - test_ptype_unsigned_types - if $fixme then { setup_xfail "*-*-*" } - test_ptype_array_types - if $fixme then { setup_xfail "*-*-*" } - test_ptype_pointer_types - } -} - -# Run tests for each of the test executables. -# If the third argument is 1, the tests will be expected to fail. -# We should extract the information about available tests and bfd formats -# from the makefile or some other control file (FIXME). - -loadandtest m68k-elf "elf32-m68k" 0 - -# I'm getting an XPASS for explicit format on this one -loadandtest m68k-aout "a.out-newsos3" 1 - -loadandtest m68k-aout2 "a.out-sunos-big" 0 -loadandtest mips-ecoff "ecoff-bigmips" 0 -loadandtest i486-elf "elf32-i386" 0 -loadandtest sparc-aout "a.out-sunos-big" 0 -loadandtest sparc-elf "elf32-sparc" 0 - -#FIXME: i860 support is unlikely to be working in the near future -# so suppress this test until it is working. -fnf -#loadandtest i860-elf "elf32-i860" 0 - -gdb_test "set gnutarget auto" "" |