diff options
Diffstat (limited to 'gdb/gdbserver/Makefile.in')
| -rw-r--r-- | gdb/gdbserver/Makefile.in | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in new file mode 100644 index 00000000000..b016e134c5f --- /dev/null +++ b/gdb/gdbserver/Makefile.in @@ -0,0 +1,241 @@ +#Copyright 1989, 90, 91, 92, 93, 94, 95, 96, 1997 +#Free Software Foundation, Inc. + +# This file is part of GDB. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +prefix = /usr/local + +program_transform_name = +exec_prefix = $(prefix) +bindir = $(exec_prefix)/bin +libdir = $(exec_prefix)/lib +tooldir = $(libdir)/$(target_alias) + +datadir = $(prefix)/share +mandir = $(prefix)/man +man1dir = $(mandir)/man1 +man2dir = $(mandir)/man2 +man3dir = $(mandir)/man3 +man4dir = $(mandir)/man4 +man5dir = $(mandir)/man5 +man6dir = $(mandir)/man6 +man7dir = $(mandir)/man7 +man8dir = $(mandir)/man8 +man9dir = $(mandir)/man9 +infodir = $(prefix)/info +includedir = $(prefix)/include + +SHELL = /bin/sh + +INSTALL = `cd $(srcdir)/../..;pwd`/install-sh -c +INSTALL_PROGRAM = $(INSTALL) +INSTALL_DATA = $(INSTALL) + +AR = ar +AR_FLAGS = qv +RANLIB = ranlib + +# If you are compiling with GCC, make sure that either 1) You use the +# -traditional flag, or 2) You have the fixed include files where GCC +# can reach them. Otherwise the ioctl calls in inflow.c +# will be incorrectly compiled. The "fixincludes" script in the gcc +# distribution will fix your include files up. +#CC=cc +#CC=gcc -traditional +GCC=gcc + +# Directory containing source files. Don't clean up the spacing, +# this exact string is matched for by the "configure" script. +srcdir = . + +# It is also possible that you will need to add -I/usr/include/sys to the +# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which +# is where it should be according to Posix). + +# Set this up with gcc if you have gnu ld and the loader will print out +# line numbers for undefinded refs. +#CC-LD=gcc -static +CC-LD=${CC} + +# Where is the "include" directory? Traditionally ../include or ./include +INCLUDE_DIR = ${srcdir}/../../include +INCLUDE_DEP = $$(INCLUDE_DIR) + +# Where are the BFD library? +BFD_DIR = ../../bfd +BFD = $(BFD_DIR)/libbfd.a +BFD_SRC = $(srcdir)/$(BFD_DIR) +BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC) + +# Where is the source dir for the READLINE library? Traditionally in .. or . +# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) +READLINE_DIR = ${srcdir}/../readline +READLINE_DEP = $$(READLINE_DIR) + +# All the includes used for CFLAGS and for lint. +# -I. for config files. +# -I${srcdir} possibly for regex.h also. +# -I${srcdir}/config for more generic config files. +INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/.. -I${srcdir}/../config -I$(INCLUDE_DIR) + +# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS +# from the config/ directory. +GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS} +#PROFILE_CFLAGS = -pg + +# CFLAGS is specifically reserved for setting from the command line +# when running make. I.E. "make CFLAGS=-Wmissing-prototypes". +CFLAGS = -g +# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. +INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} \ + ${BFD_CFLAGS} ${INCLUDE_CFLAGS} + +# LDFLAGS is specifically reserved for setting from the command line +# when running make. + +# Perhaps should come from parent Makefile +VERSION = gdbserver-4.12.3 +DIST=gdb + +LINT=/usr/5bin/lint +LINTFLAGS= $(BFD_CFLAGS) + +# Host and target-dependent makefile fragments come in here. +#### +# End of host and target-dependent makefile fragments + +# All source files that go into linking GDB remote server. + +SFILES = $(srcdir)/low-lynx.c $(srcdir)/low-sparc.c $(srcdir)/low-sun3.c \ + $(srcdir)/low-hppabsd.c \ + $(srcdir)/utils.c $(srcdir)/server.c $(srcdir)/remote-utils.c + +DEPFILES = $(GDBSERVER_DEPFILES) + +SOURCES = $(SFILES) $(ALLDEPFILES) +TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} + +OBS = utils.o $(GDBSERVER_DEPFILES) server.o remote-utils.o + +# Prevent Sun make from putting in the machine type. Setting +# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. +.c.o: + ${CC} -c ${INTERNAL_CFLAGS} $< + +all: gdbserver gdbreplay + +# Traditionally "install" depends on "all". But it may be useful +# not to; for example, if the user has made some trivial change to a +# source file and doesn't care about rebuilding or just wants to save the +# time it takes for make to check that all is up to date. +# install-only is intended to address that need. +install: all install-only +install-only: + n=`echo gdbserver | sed '$(program_transform_name)'`; \ + if [ x$$n = x ]; then n=gdbserver; else true; fi; \ + $(INSTALL_PROGRAM) gdbserver $(bindir)/$$n; \ + $(INSTALL_DATA) $(srcdir)/gdbserver.1 $(man1dir)/$$n.1 + +uninstall: force + n=`echo gdbserver | sed '$(program_transform_name)'`; \ + if [ x$$n = x ]; then n=gdbserver; else true; fi; \ + rm -f $(bindir)/$$n $(man1dir)/$$n.1 + +installcheck: +check: +info dvi: +install-info: +clean-info: + +gdbserver: $(OBS) ${ADD_DEPS} ${CDEPS} + rm -f gdbserver + ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdbserver $(OBS) \ + $(GDBSERVER_LIBS) $(XM_CLIBS) + +gdbreplay: gdbreplay.o + rm -f gdbreplay + ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdbreplay gdbreplay.o \ + $(XM_CLIBS) + +config.status: + @echo "You must configure gdbserver. Look at the README file for details." + @false + +# Put the proper machine-specific files first, so M-. on a machine +# specific routine gets the one for the correct machine. +# The xyzzy stuff below deals with empty DEPFILES +TAGS: ${TAGFILES} + etags `find ${srcdir}/../config -name $(TM_FILE) -print` \ + `find ${srcdir}/../config -name ${XM_FILE} -print` \ + `find ${srcdir}/../config -name ${NAT_FILE} -print` \ + `for i in yzzy ${DEPFILES}; do \ + if [ x$$i != xyzzy ]; then \ + echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \ + fi; \ + done` \ + ${TAGFILES} +tags: TAGS + +clean: + rm -f *.o ${ADD_FILES} *~ + rm -f gdbserver core make.log + +distclean: clean + rm -f nm.h tm.h xm.h config.status + rm -f Makefile + +maintainer-clean realclean: clean + rm -f nm.h tm.h xm.h config.status + rm -f Makefile + +STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb + +Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) + $(SHELL) ./config.status + +force: + +version.c: Makefile + echo 'char *version = "$(VERSION)";' >version.c + +# GNU Make has an annoying habit of putting *all* the Makefile variables +# into the environment, unless you include this target as a circumvention. +# Rumor is that this will be fixed (and this target can be removed) +# in GNU Make 4.0. +.NOEXPORT: + +# GNU Make 3.63 has a different problem: it keeps tacking command line +# overrides onto the definition of $(MAKE). This variable setting +# will remove them. +MAKEOVERRIDES= + +## This is ugly, but I don't want GNU make to put these variables in +## the environment. Older makes will see this as a set of targets +## with no dependencies and no actions. +unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET : + +server.o : ${srcdir}/server.c ${srcdir}/server.h +remote-utils.o : ${srcdir}/remote-utils.c ${srcdir}/server.h +low-linux.o : ${srcdir}/low-linux.c ${srcdir}/server.h +low-lynx.o : ${srcdir}/low-lynx.c ${srcdir}/server.h +low-sim.o : ${srcdir}/low-sim.c ${srcdir}/server.h +low-sparc.o : $(srcdir)/low-sparc.c $(srcdir)/server.h +low-sun3.o : $(srcdir)/low-sun3.c $(srcdir)/server.h +low-hppabsd.o : $(srcdir)/low-hppabsd.c $(srcdir)/server.h +utils.o : ${srcdir}/utils.c ${srcdir}/server.h + +# This is the end of "Makefile.in". |