1 files changed, 213 insertions, 0 deletions
diff --git a/gdb/config/w65/tm-w65.h b/gdb/config/w65/tm-w65.h
new file mode 100644
index 00000000000..2e354bbb18f
--- /dev/null
+++ b/gdb/config/w65/tm-w65.h
@@ -0,0 +1,213 @@
+/* Parameters for execution on a WDC 65816 machine.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Contributed by Steve Chamberlain sac@cygnus.com */
+
+#define GDB_TARGET_IS_W65
+
+#define IEEE_FLOAT 1
+
+/* Define the bit, byte, and word ordering of the machine.  */
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+extern CORE_ADDR w65_skip_prologue ();
+
+#define SKIP_PROLOGUE(ip) \
+    {(ip) = w65_skip_prologue(ip);}
+
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions. 
+
+   The return address is the value saved in the PR register + 4  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  saved_pc_after_call(frame)
+
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Illegal instruction - used by the simulator for breakpoint
+   detection */
+
+#define BREAKPOINT {0xcb} /* WAI */
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+#define DECR_PC_AFTER_BREAK 0
+
+/* Return 1 if P points to an invalid floating point value.  */
+
+#define INVALID_FLOAT(p, len) 0   /* Just a first guess; not checked */
+
+/* Say how long registers are.  */
+/*#define REGISTER_TYPE  int*/
+
+/* Say how much memory is needed to store a copy of the register set */
+#define REGISTER_BYTES    (NUM_REGS*4) 
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N)     (((N) < 16) ? 2 : 4)
+
+#define REGISTER_VIRTUAL_SIZE(N)  REGISTER_RAW_SIZE(N)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long)
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+#define REGISTER_NAMES \
+  {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7",  \
+   "r8","r9","r10","r11","r12","r13","r14","r15", \
+   "pc","a", "x",  "y",  "dbr","d",  "s",  "p",   \
+   "ticks","cycles","insts"}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define SP_REGNUM  22
+#define FP_REGNUM  15
+#define NUM_REGS   27
+#define PC_REGNUM  16
+#define P_REGNUM   23
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. 
+
+   We store structs through a pointer passed in R4 */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    { write_register (4, (ADDR));  }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
+
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  
+
+   Things always get returned in R4/R5 */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE))
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_CHAIN(FRAME)       w65_frame_chain(FRAME)
+#define FRAME_SAVED_PC(FRAME)    (w65_frame_saved_pc(FRAME))
+#define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
+#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   frame_find_saved_regs(frame_info, &(frame_saved_regs))
+
+#define NAMES_HAVE_UNDERSCORE
+
+typedef unsigned short INSN_WORD;
+
+extern CORE_ADDR w65_addr_bits_remove PARAMS ((CORE_ADDR));
+#define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr)
+
+#define CALL_DUMMY_LENGTH 10
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+#define POP_FRAME pop_frame();
+
+
+#define NOP   {0xea}
+
+#define REGISTER_SIZE 4
+
+#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+
+#define TARGET_INT_BIT  16
+#define TARGET_LONG_BIT 32
+#define TARGET_PTR_BIT  32