diff options
Diffstat (limited to 'gdb/config/a29k/tm-a29k.h')
| -rw-r--r-- | gdb/config/a29k/tm-a29k.h | 707 |
1 files changed, 707 insertions, 0 deletions
diff --git a/gdb/config/a29k/tm-a29k.h b/gdb/config/a29k/tm-a29k.h new file mode 100644 index 00000000000..4892ec52cb4 --- /dev/null +++ b/gdb/config/a29k/tm-a29k.h @@ -0,0 +1,707 @@ +/* Parameters for target machine AMD 29000, for GDB, the GNU debugger. + Copyright 1990, 1991, 1993, 1994 Free Software Foundation, Inc. + Contributed by Cygnus Support. Written by Jim Kingdon. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Parameters for an EB29K (a board which plugs into a PC and is + accessed through EBMON software running on the PC, which we + use as we'd use a remote stub (see remote-eb.c). + + If gdb is ported to other a29k machines/systems, the + machine/system-specific parts should be removed from this file (a + la tm-m68k.h). */ + +/* Byte order is configurable, but this machine runs big-endian. */ +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Floating point uses IEEE representations. */ +#define IEEE_FLOAT + +/* Recognize our magic number. */ +#define BADMAG(x) ((x).f_magic != 0572) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ + { pc = skip_prologue (pc); } +CORE_ADDR skip_prologue (); + +/* Immediately after a function call, return the saved pc. + Can't go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) ((frame->flags & TRANSPARENT_FRAME) \ + ? read_register (TPC_REGNUM) \ + : read_register (LR0_REGNUM)) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Stack must be aligned on 32-bit boundaries when synthesizing + function calls. */ + +#define STACK_ALIGN(ADDR) (((ADDR) + 3) & ~3) + +/* Sequence of bytes for breakpoint instruction. */ +/* ASNEQ 0x50, gr1, gr1 + The trap number 0x50 is chosen arbitrarily. + We let the command line (or previously included files) override this + setting. */ +#ifndef BREAKPOINT +#if TARGET_BYTE_ORDER == BIG_ENDIAN +#define BREAKPOINT {0x72, 0x50, 0x01, 0x01} +#else /* Target is little-endian. */ +#define BREAKPOINT {0x01, 0x01, 0x50, 0x72} +#endif /* Target is little-endian. */ +#endif /* BREAKPOINT */ + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Allow the register declarations here to be overridden for remote + kernel debugging. */ +#if !defined (REGISTER_NAMES) + +/* Number of machine registers */ + +#define NUM_REGS 205 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. + + FIXME, add floating point registers and support here. + + Also note that this list does not attempt to deal with kernel + debugging (in which the first 32 registers are gr64-gr95). */ + +#define REGISTER_NAMES \ +{"gr96", "gr97", "gr98", "gr99", "gr100", "gr101", "gr102", "gr103", "gr104", \ + "gr105", "gr106", "gr107", "gr108", "gr109", "gr110", "gr111", "gr112", \ + "gr113", "gr114", "gr115", "gr116", "gr117", "gr118", "gr119", "gr120", \ + "gr121", "gr122", "gr123", "gr124", "gr125", "gr126", "gr127", \ + "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", "lr8", "lr9", \ + "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", "lr16", "lr17", "lr18", \ + "lr19", "lr20", "lr21", "lr22", "lr23", "lr24", "lr25", "lr26", "lr27", \ + "lr28", "lr29", "lr30", "lr31", "lr32", "lr33", "lr34", "lr35", "lr36", \ + "lr37", "lr38", "lr39", "lr40", "lr41", "lr42", "lr43", "lr44", "lr45", \ + "lr46", "lr47", "lr48", "lr49", "lr50", "lr51", "lr52", "lr53", "lr54", \ + "lr55", "lr56", "lr57", "lr58", "lr59", "lr60", "lr61", "lr62", "lr63", \ + "lr64", "lr65", "lr66", "lr67", "lr68", "lr69", "lr70", "lr71", "lr72", \ + "lr73", "lr74", "lr75", "lr76", "lr77", "lr78", "lr79", "lr80", "lr81", \ + "lr82", "lr83", "lr84", "lr85", "lr86", "lr87", "lr88", "lr89", "lr90", \ + "lr91", "lr92", "lr93", "lr94", "lr95", "lr96", "lr97", "lr98", "lr99", \ + "lr100", "lr101", "lr102", "lr103", "lr104", "lr105", "lr106", "lr107", \ + "lr108", "lr109", "lr110", "lr111", "lr112", "lr113", "lr114", "lr115", \ + "lr116", "lr117", "lr118", "lr119", "lr120", "lr121", "lr122", "lr123", \ + "lr124", "lr125", "lr126", "lr127", \ + "AI0", "AI1", "AI2", "AI3", "AI4", "AI5", "AI6", "AI7", "AI8", "AI9", \ + "AI10", "AI11", "AI12", "AI13", "AI14", "AI15", "FP", \ + "bp", "fc", "cr", "q", \ + "vab", "ops", "cps", "cfg", "cha", "chd", "chc", "rbp", "tmc", "tmr", \ + "pc0", "pc1", "pc2", "mmu", "lru", "fpe", "inte", "fps", "exo", "gr1", \ + "alu", "ipc", "ipa", "ipb" } + +/* + * Converts an sdb register number to an internal gdb register number. + * Currently under epi, gr96->0...gr127->31...lr0->32...lr127->159, or... + * gr64->0...gr95->31, lr0->32...lr127->159. + */ +#define SDB_REG_TO_REGNUM(value) \ + (((value) >= 96 && (value) <= 127) ? ((value) - 96) : \ + ((value) >= 128 && (value) <= 255) ? ((value) - 128 + LR0_REGNUM) : \ + (value)) + +/* + * Provide the processor register numbers of some registers that are + * expected/written in instructions that might change under different + * register sets. Namely, gcc can compile (-mkernel-registers) so that + * it uses gr64-gr95 in stead of gr96-gr127. + */ +#define MSP_HW_REGNUM 125 /* gr125 */ +#define RAB_HW_REGNUM 126 /* gr126 */ + +/* Convert Processor Special register #x to REGISTER_NAMES register # */ +#define SR_REGNUM(x) \ + ((x) < 15 ? VAB_REGNUM + (x) \ + : (x) >= 128 && (x) < 131 ? IPC_REGNUM + (x) - 128 \ + : (x) == 131 ? Q_REGNUM \ + : (x) == 132 ? ALU_REGNUM \ + : (x) >= 133 && (x) < 136 ? BP_REGNUM + (x) - 133 \ + : (x) >= 160 && (x) < 163 ? FPE_REGNUM + (x) - 160 \ + : (x) == 164 ? EXO_REGNUM \ + : (error ("Internal error in SR_REGNUM"), 0)) +#define GR96_REGNUM 0 + +/* Define the return register separately, so it can be overridden for + kernel procedure calling conventions. */ +#define RETURN_REGNUM GR96_REGNUM +#define GR1_REGNUM 200 +/* This needs to be the memory stack pointer, not the register stack pointer, + to make call_function work right. */ +#define SP_REGNUM MSP_REGNUM +#define FP_REGNUM 33 /* lr1 */ + +/* Return register for transparent calling convention (gr122). */ +#define TPC_REGNUM (122 - 96 + GR96_REGNUM) + +/* Large Return Pointer (gr123). */ +#define LRP_REGNUM (123 - 96 + GR96_REGNUM) + +/* Static link pointer (gr124). */ +#define SLP_REGNUM (124 - 96 + GR96_REGNUM) + +/* Memory Stack Pointer (gr125). */ +#define MSP_REGNUM (125 - 96 + GR96_REGNUM) + +/* Register allocate bound (gr126). */ +#define RAB_REGNUM (126 - 96 + GR96_REGNUM) + +/* Register Free Bound (gr127). */ +#define RFB_REGNUM (127 - 96 + GR96_REGNUM) + +/* Register Stack Pointer. */ +#define RSP_REGNUM GR1_REGNUM +#define LR0_REGNUM 32 +#define BP_REGNUM 177 +#define FC_REGNUM 178 +#define CR_REGNUM 179 +#define Q_REGNUM 180 +#define VAB_REGNUM 181 +#define OPS_REGNUM (VAB_REGNUM + 1) +#define CPS_REGNUM (VAB_REGNUM + 2) +#define CFG_REGNUM (VAB_REGNUM + 3) +#define CHA_REGNUM (VAB_REGNUM + 4) +#define CHD_REGNUM (VAB_REGNUM + 5) +#define CHC_REGNUM (VAB_REGNUM + 6) +#define RBP_REGNUM (VAB_REGNUM + 7) +#define TMC_REGNUM (VAB_REGNUM + 8) +#define TMR_REGNUM (VAB_REGNUM + 9) +#define NPC_REGNUM (VAB_REGNUM + 10) /* pc0 */ +#define PC_REGNUM (VAB_REGNUM + 11) /* pc1 */ +#define PC2_REGNUM (VAB_REGNUM + 12) +#define MMU_REGNUM (VAB_REGNUM + 13) +#define LRU_REGNUM (VAB_REGNUM + 14) +#define FPE_REGNUM (VAB_REGNUM + 15) +#define INTE_REGNUM (VAB_REGNUM + 16) +#define FPS_REGNUM (VAB_REGNUM + 17) +#define EXO_REGNUM (VAB_REGNUM + 18) +/* gr1 is defined above as 200 = VAB_REGNUM + 19 */ +#define ALU_REGNUM (VAB_REGNUM + 20) +#define PS_REGNUM ALU_REGNUM +#define IPC_REGNUM (VAB_REGNUM + 21) +#define IPA_REGNUM (VAB_REGNUM + 22) +#define IPB_REGNUM (VAB_REGNUM + 23) + +#endif /* !defined(REGISTER_NAMES) */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for + register N. */ +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +/* All regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) (4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +/* All regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) (4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE (4) + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE (4) + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) == PC_REGNUM || (N) == LRP_REGNUM || (N) == SLP_REGNUM \ + || (N) == MSP_REGNUM || (N) == RAB_REGNUM || (N) == RFB_REGNUM \ + || (N) == GR1_REGNUM || (N) == FP_REGNUM || (N) == LR0_REGNUM \ + || (N) == NPC_REGNUM || (N) == PC2_REGNUM) \ + ? lookup_pointer_type (builtin_type_void) : builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ +/* On the a29k the LRP points to the part of the structure beyond the first + 16 words. */ +#define STORE_STRUCT_RETURN(ADDR, SP) \ + write_register (LRP_REGNUM, (ADDR) + 16 * 4); + +/* Should call_function allocate stack space for a struct return? */ +/* On the a29k objects over 16 words require the caller to allocate space. */ +extern use_struct_convention_fn a29k_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p, type) a29k_use_struct_convention (gcc_p, type) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + { \ + int reg_length = TYPE_LENGTH (TYPE); \ + if (reg_length > 16 * 4) \ + { \ + reg_length = 16 * 4; \ + read_memory (*((int *)(REGBUF) + LRP_REGNUM), (VALBUF) + 16 * 4, \ + TYPE_LENGTH (TYPE) - 16 * 4); \ + } \ + memcpy ((VALBUF), ((int *)(REGBUF))+RETURN_REGNUM, reg_length); \ + } + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + { \ + int reg_length = TYPE_LENGTH (TYPE); \ + if (reg_length > 16 * 4) \ + { \ + reg_length = 16 * 4; \ + write_memory (read_register (LRP_REGNUM), \ + (char *)(VALBUF) + 16 * 4, \ + TYPE_LENGTH (TYPE) - 16 * 4); \ + } \ + write_register_bytes (REGISTER_BYTE (RETURN_REGNUM), (char *)(VALBUF), \ + TYPE_LENGTH (TYPE)); \ + } + +/* The a29k user's guide documents well what the stacks look like. + But what isn't so clear there is how this interracts with the + symbols, or with GDB. + In the following saved_msp, saved memory stack pointer (which functions + as a memory frame pointer), means either + a register containing the memory frame pointer or, in the case of + functions with fixed size memory frames (i.e. those who don't use + alloca()), the result of the calculation msp + msize. + + LOC_ARG, LOC_LOCAL - For GCC, these are relative to saved_msp. + For high C, these are relative to msp (making alloca impossible). + LOC_REGISTER, LOC_REGPARM - The register number is the number at the + time the function is running (after the prologue), or in the case + of LOC_REGPARM, may be a register number in the range 160-175. + + The compilers do things like store an argument into memory, and then put out + a LOC_ARG for it, or put it into global registers and put out a + LOC_REGPARM. Thus is it important to execute the first line of + code (i.e. the line of the open brace, i.e. the prologue) of a function + before trying to print arguments or anything. + + The following diagram attempts to depict what is going on in memory + (see also the _a29k user's guide_) and also how that interacts with + GDB frames. We arbitrarily pick fci->frame to point the same place + as the register stack pointer; since we set it ourself in + INIT_EXTRA_FRAME_INFO, and access it only through the FRAME_* + macros, it doesn't really matter exactly how we + do it. However, note that FRAME_FP is used in two ways in GDB: + (1) as a "magic cookie" which uniquely identifies frames (even over + calls to the inferior), (2) (in PC_IN_CALL_DUMMY [ON_STACK]) + as the value of SP_REGNUM before the dummy frame was pushed. These + two meanings would be incompatible for the a29k if we defined + CALL_DUMMY_LOCATION == ON_STACK (but we don't, so don't worry about it). + Also note that "lr1" below, while called a frame pointer + in the user's guide, has only one function: To determine whether + registers need to be filled in the function epilogue. + + Consider the code: + < call bar> + loc1: . . . + bar: sub gr1,gr1,rsize_b + . . . + add mfp,msp,0 + sub msp,msp,msize_b + . . . + < call foo > + loc2: . . . + foo: sub gr1,gr1,rsize_f + . . . + add mfp,msp,0 + sub msp,msp,msize_f + . . . + loc3: < suppose the inferior stops here > + + memory stack register stack + | | |____________| + | | |____loc1____| + +------->|___________| | | ^ + | | ^ | | locals_b | | + | | | | |____________| | + | | | | | | | rsize_b + | | | msize_b | | args_to_f | | + | | | | |____________| | + | | | | |____lr1_____| V + | | V | |____loc2____|<----------------+ + | +--->|___________|<---------mfp | ^ | + | | | ^ | | locals_f | | | + | | | | msize_f | |____________| | | + | | | | | | | | rsize_f | + | | | V | | args | | | + | | |___________|<msp |____________| | | + | | |_____lr1____| V | + | | |___garbage__| <- gr1 <----+ | + | | | | + | | | | + | | pc=loc3 | | + | | | | + | | | | + | | frame cache | | + | | |_________________| | | + | | |rsize=rsize_b | | | + | | |msize=msize_b | | | + +---|--------saved_msp | | | + | |frame------------------------------------|---+ + | |pc=loc2 | | + | |_________________| | + | |rsize=rsize_f | | + | |msize=msize_f | | + +--------saved_msp | | + |frame------------------------------------+ + |pc=loc3 | + |_________________| + + So, is that sufficiently confusing? Welcome to the 29000. + Notes: + * The frame for foo uses a memory frame pointer but the frame for + bar does not. In the latter case the saved_msp is + computed by adding msize to the saved_msp of the + next frame. + * msize is in the frame cache only for high C's sake. */ + +void read_register_stack (); +long read_register_stack_integer (); + +#define FRAME_INIT_SAVED_REGS(fi) /*no-op*/ + +#define EXTRA_FRAME_INFO \ + CORE_ADDR saved_msp; \ + unsigned int rsize; \ + unsigned int msize; \ + unsigned char flags; + +/* Bits for flags in EXTRA_FRAME_INFO */ +#define TRANSPARENT_FRAME 0x1 /* This is a transparent frame */ +#define MFP_USED 0x2 /* A memory frame pointer is used */ + +/* Because INIT_FRAME_PC gets passed fromleaf, that's where we init + not only ->pc and ->frame, but all the extra stuff, when called from + get_prev_frame_info, that is. */ +#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) init_extra_frame_info(fci) +void init_extra_frame_info (); + +#define INIT_FRAME_PC(fromleaf, fci) init_frame_pc(fromleaf, fci) +void init_frame_pc (); + + +/* FRAME_CHAIN takes a FRAME + and produces the frame's chain-pointer. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. */ + +/* On the a29k, the nominal address of a frame is the address on the + register stack of the return address (the one next to the incoming + arguments, not down at the bottom so nominal address == stack pointer). + + GDB expects "nominal address" to equal contents of FP_REGNUM, + at least when it comes time to create the innermost frame. + However, that doesn't work for us, so when creating the innermost + frame we set ->frame ourselves in INIT_EXTRA_FRAME_INFO. */ + +/* These are mostly dummies for the a29k because INIT_FRAME_PC + sets prev->frame instead. */ +/* If rsize is zero, we must be at end of stack (or otherwise hosed). + If we don't check rsize, we loop forever if we see rsize == 0. */ +#define FRAME_CHAIN(thisframe) \ + ((thisframe)->rsize == 0 \ + ? 0 \ + : (thisframe)->frame + (thisframe)->rsize) + +/* Determine if the frame has a 'previous' and back-traceable frame. */ +#define FRAME_IS_UNCHAINED(frame) ((frame)->flags & TRANSPARENT_FRAME) + +/* Find the previous frame of a transparent routine. + * For now lets not try and trace through a transparent routine (we might + * have to assume that all transparent routines are traps). + */ +#define FIND_PREV_UNCHAINED_FRAME(frame) 0 + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +/* Saved pc (i.e. return address). */ +#define FRAME_SAVED_PC(fraim) \ + (read_register_stack_integer ((fraim)->frame + (fraim)->rsize, 4)) + +/* Local variables (i.e. LOC_LOCAL) are on the memory stack, with their + offsets being relative to the memory stack pointer (high C) or + saved_msp (gcc). */ + +#define FRAME_LOCALS_ADDRESS(fi) frame_locals_address (fi) +extern CORE_ADDR frame_locals_address (); + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ +/* We tried going to the effort of finding the tags word and getting + the argcount field from it, to support debugging assembler code. + Problem was, the "argcount" field never did hold the argument + count. */ +#define FRAME_NUM_ARGS(numargs, fi) ((numargs) = -1) + +#define FRAME_ARGS_ADDRESS(fi) FRAME_LOCALS_ADDRESS (fi) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Provide our own get_saved_register. HAVE_REGISTER_WINDOWS is insufficient + because registers get renumbered on the a29k without getting saved. */ + +#define GET_SAVED_REGISTER + +/* Call function stuff. */ + +/* The dummy frame looks like this (see also the general frame picture + above): + + register stack + + | | frame for function + | locals_sproc | executing at time + |________________| of call_function. + | | We must not disturb + | args_out_sproc | it. + memory stack |________________| + |____lr1_sproc___|<-+ + | | |__retaddr_sproc_| | <-- gr1 (at start) + |____________|<-msp 0 <-----------mfp_dummy_____| | + | | (at start) | save regs | | + | arg_slop | | pc0,pc1 | | + | | | pc2,lr0 sproc | | + | (16 words) | | gr96-gr124 | | + |____________|<-msp 1--after | sr160-sr162 | | + | | PUSH_DUMMY_FRAME| sr128-sr135 | | + | struct ret | |________________| | + | 17+ | | | | + |____________|<- lrp | args_out_dummy | | + | struct ret | | (16 words) | | + | 16 | |________________| | + | (16 words) | |____lr1_dummy___|--+ + |____________|<- msp 2--after |_retaddr_dummy__|<- gr1 after + | | struct ret | | PUSH_DUMMY_FRAME + | margs17+ | area allocated | locals_inf | + | | |________________| called + |____________|<- msp 4--when | | function's + | | inf called | args_out_inf | frame (set up + | margs16 | |________________| by called + | (16 words) | |_____lr1_inf____| function). + |____________|<- msp 3--after | . | + | | args pushed | . | + | | | . | + | | + + arg_slop: This area is so that when the call dummy adds 16 words to + the msp, it won't end up larger than mfp_dummy (it is needed in the + case where margs and struct_ret do not add up to at least 16 words). + struct ret: This area is allocated by GDB if the return value is more + than 16 words. struct ret_16 is not used on the a29k. + margs: Pushed by GDB. The call dummy copies the first 16 words to + args_out_dummy. + retaddr_sproc: Contains the PC at the time we call the function. + set by PUSH_DUMMY_FRAME and read by POP_FRAME. + retaddr_dummy: This points to a breakpoint instruction in the dummy. */ + +/* Rsize for dummy frame, in bytes. */ + +/* Bytes for outgoing args, lr1, and retaddr. */ +#define DUMMY_ARG (2 * 4 + 16 * 4) + +/* Number of special registers (sr128-) to save. */ +#define DUMMY_SAVE_SR128 8 +/* Number of special registers (sr160-) to save. */ +#define DUMMY_SAVE_SR160 3 +/* Number of general (gr96- or gr64-) registers to save. */ +#define DUMMY_SAVE_GREGS 29 + +#define DUMMY_FRAME_RSIZE \ +(4 /* mfp_dummy */ \ + + 4 * 4 /* pc0, pc1, pc2, lr0 */ \ + + DUMMY_SAVE_GREGS * 4 \ + + DUMMY_SAVE_SR160 * 4 \ + + DUMMY_SAVE_SR128 * 4 \ + + DUMMY_ARG \ + + 4 /* pad to doubleword */ ) + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME push_dummy_frame() +extern void push_dummy_frame (); + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ + +#define POP_FRAME pop_frame() +extern void pop_frame (); + +/* This sequence of words is the instructions + mtsrim cr, 15 + loadm 0, 0, lr2, msp ; load first 16 words of arguments into registers + add msp, msp, 16 * 4 ; point to the remaining arguments + CONST_INSN: + const lr0,inf ; (replaced by half of target addr) + consth lr0,inf ; (replaced by other half of target addr) + calli lr0, lr0 + aseq 0x40,gr1,gr1 ; nop + BREAKPT_INSN: + asneq 0x50,gr1,gr1 ; breakpoint (replaced by local breakpoint insn) + */ + +#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER +#define BS(const) const +#else +#define BS(const) (((const) & 0xff) << 24) | \ + (((const) & 0xff00) << 8) | \ + (((const) & 0xff0000) >> 8) | \ + (((const) & 0xff000000) >> 24) +#endif + +/* Position of the "const" and blkt instructions within CALL_DUMMY in bytes. */ +#define CONST_INSN (3 * 4) +#define BREAKPT_INSN (7 * 4) +#define CALL_DUMMY { \ + BS(0x0400870f),\ + BS(0x36008200|(MSP_HW_REGNUM)), \ + BS(0x15000040|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16)), \ + BS(0x03ff80ff), \ + BS(0x02ff80ff), \ + BS(0xc8008080), \ + BS(0x70400101), \ + BS(0x72500101)} +#define CALL_DUMMY_LENGTH (8 * 4) + +#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */ + +/* Helper macro for FIX_CALL_DUMMY. WORDP is a long * which points to a + word in target byte order; bits 0-7 and 16-23 of *WORDP are replaced with + bits 0-7 and 8-15 of DATA (which is in host byte order). */ + +#if TARGET_BYTE_ORDER == BIG_ENDIAN +#define STUFF_I16(WORDP, DATA) \ + { \ + *((char *)(WORDP) + 3) = ((DATA) & 0xff);\ + *((char *)(WORDP) + 1) = (((DATA) >> 8) & 0xff);\ + } +#else /* Target is little endian. */ +#define STUFF_I16(WORDP, DATA) \ + { + *(char *)(WORDP) = ((DATA) & 0xff); + *((char *)(WORDP) + 2) = (((DATA) >> 8) & 0xff); + } +#endif /* Target is little endian. */ + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +/* Currently this stuffs in the address of the function that we are calling. + Since different a29k systems use different breakpoint instructions, it + also stuffs BREAKPOINT in the right place (to avoid having to + duplicate CALL_DUMMY in each tm-*.h file). */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + {\ + STUFF_I16((char *)dummyname + CONST_INSN, fun); \ + STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16); \ + /* FIXME memcpy ((char *)(dummyname) + BREAKPT_INSN, break_insn, 4); */ \ + } + +/* a29k architecture has separate data & instruction memories -- wired to + different pins on the chip -- and can't execute the data memory. + Also, there should be space after text_end; + we won't get a SIGSEGV or scribble on data space. */ + +#define CALL_DUMMY_LOCATION AFTER_TEXT_END + +/* Because of this, we need (as a kludge) to know the addresses of the + text section. */ + +#define NEED_TEXT_START_END 1 + +/* How to translate register numbers in the .stab's into gdb's internal register + numbers. We don't translate them, but we warn if an invalid register + number is seen. Note that FIXME, we use the value "sym" as an implicit + argument in printing the error message. It happens to be available where + this macro is used. (This macro definition appeared in a late revision + of gdb-3.91.6 and is not well tested. Also, it should be a "complaint".) */ + +#define STAB_REG_TO_REGNUM(num) \ + (((num) > LR0_REGNUM + 127) \ + ? fprintf(stderr, \ + "Invalid register number %d in symbol table entry for %s\n", \ + (num), SYMBOL_SOURCE_NAME (sym)), (num) \ + : (num)) + +extern enum a29k_processor_types { + a29k_unknown, + + /* Bit 0x400 of the CPS does *not* identify freeze mode, i.e. 29000, + 29030, etc. */ + a29k_no_freeze_mode, + + /* Bit 0x400 of the CPS does identify freeze mode, i.e. 29050. */ + a29k_freeze_mode +} processor_type; + +/* We need three arguments for a general frame specification for the + "frame" or "info frame" command. */ + +#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv) +extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *)); |