* emulparams/elf32xtensa.sh (TEXT_PLT): Enable.

	(OTHER_READONLY_SECTIONS): Add linkonce .xt_except_table sections.
	(OTHER_READWRITE_SECTIONS): Add linkonce .xt_except_desc sections.
	(OTHER_SDATA_SECTIONS): New.
	* scripttempl/elfxtensa.sc: Import changes from elf.sc.

1 files changed, 76 insertions, 23 deletions

diff --git a/ld/scripttempl/elfxtensa.sc b/ld/scripttempl/elfxtensa.sc
index b76bc1482a7..8dcaa3c822b 100644
--- a/ld/scripttempl/elfxtensa.sc
+++ b/ld/scripttempl/elfxtensa.sc
@@ -52,6 +52,7 @@
 #		so that .got can be in the RELRO area.  It should be set to
 #		the number of bytes in the beginning of .got.plt which can be
 #		in the RELRO area as well.
+#	USER_LABEL_PREFIX - prefix to add to user-visible symbols.
 #
 # When adding sections, do note that the names of some sections are used
 # when specifying the start address of the next.
@@ -77,6 +78,22 @@
 #  .debug_info	.gnu.linkonce.wi.foo
 #  .tdata	.gnu.linkonce.td.foo
 #  .tbss	.gnu.linkonce.tb.foo
+#  .lrodata	.gnu.linkonce.lr.foo
+#  .ldata	.gnu.linkonce.l.foo
+#  .lbss	.gnu.linkonce.lb.foo
+#
+# plus exception-handling information for Tensilica's XCC compiler:
+#  .xt_except_table .gnu.linkonce.e.foo
+#  .xt_except_desc  .gnu.linkonce.h.foo
+#
+# plus Xtensa-specific literal sections:
+#  .literal	.gnu.linkonce.literal.foo
+#  .lit4   	.gnu.linkonce.lit4.foo
+#
+# plus Xtensa-specific "property table" sections:
+#  .xt.lit      .gnu.linkonce.p.foo
+#  .xt.insn     .gnu.linkonce.x.foo (obsolete)
+#  .xt.prop     .gnu.linkonce.prop.foo
 #
 #  Each of these can also have corresponding .rel.* and .rela.* sections.
 
@@ -103,6 +120,7 @@ INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
 if test -z "$PLT"; then
   PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
 fi
+test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
 if test -z "$GOT"; then
   if test -z "$SEPARATE_GOTPLT"; then
     GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
@@ -113,7 +131,7 @@ if test -z "$GOT"; then
 fi
 DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
 RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
-DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
 STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
 INIT_LIT=".init.literal 0 : { *(.init.literal)	}"
 INIT=".init         0 : { *(.init)		}"
@@ -122,10 +140,12 @@ FINI=".fini         0 : { *(.fini)		}"
 if test -z "${NO_SMALL_DATA}"; then
   SBSS=".sbss         ${RELOCATING-0} :
   {
+    ${RELOCATING+${SBSS_START_SYMBOLS}}
     ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
     *(.dynsbss)
     *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
     *(.scommon)
+    ${RELOCATING+${SBSS_END_SYMBOLS}}
   }"
   SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
   SDATA="/* We want the small data sections together, so single-instruction offsets
@@ -137,7 +157,11 @@ if test -z "${NO_SMALL_DATA}"; then
     ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
     *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
   }"
-  SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+  SDATA2=".sdata2       ${RELOCATING-0} :
+  {
+    ${RELOCATING+${SDATA2_START_SYMBOLS}}
+    *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
+  }"
   REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
   .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
   REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
@@ -160,6 +184,29 @@ if test -z "${SDATA_GOT}"; then
   fi
 fi
 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
+test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
+  .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+  .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+  .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+  .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+  .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+  .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
+  .lbss ${RELOCATING-0} :
+  {
+    *(.dynlbss)
+    *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
+    *(LARGE_COMMON)
+  }
+  .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+  {
+    *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
+  }
+  .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+  {
+    *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
+    ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+  }"
 CTOR=".ctors        ${CONSTRUCTING-0} : 
   {
     ${CONSTRUCTING+${CTOR_START}}
@@ -213,8 +260,6 @@ cat <<EOF
 ENTRY(${ENTRY})
 
 ${RELOCATING+${LIB_SEARCH_DIRS}}
-${RELOCATING+/* Do we need any of these for elf?
-   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
 ${RELOCATING+${INPUT_FILES}}
 ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
@@ -232,6 +277,7 @@ SECTIONS
   ${INITIAL_READONLY_SECTIONS}
   ${TEXT_DYNAMIC+${DYNAMIC}}
   .hash         ${RELOCATING-0} : { *(.hash) }
+  .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
   .dynsym       ${RELOCATING-0} : { *(.dynsym) }
   .dynstr       ${RELOCATING-0} : { *(.dynstr) }
   .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
@@ -254,8 +300,8 @@ eval $COMBRELOCCAT <<EOF
   .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
   .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
   ${OTHER_READONLY_RELOC_SECTIONS}
-  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
-  .rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
+  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
+  .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
   .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
   .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
   .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
@@ -275,6 +321,7 @@ eval $COMBRELOCCAT <<EOF
   ${REL_SBSS2}
   .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
   .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+  ${REL_LARGE}
 EOF
 if [ -n "$COMBRELOC" ]; then
 cat <<EOF
@@ -300,7 +347,8 @@ cat <<EOF
   ${RELOCATING-$INIT_LIT}
   ${RELOCATING-$INIT}
 
-  ${DATA_PLT-${BSS_PLT-${PLT}}}
+  ${TEXT_PLT+${PLT}}
+  ${TINY_READONLY_SECTION}
   .text         ${RELOCATING-0} :
   {
     *(.got.plt* .plt*)
@@ -336,7 +384,7 @@ cat <<EOF
   ${OTHER_READONLY_SECTIONS}
   .eh_frame_hdr : { *(.eh_frame_hdr) }
   .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
-  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
 
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
@@ -346,7 +394,7 @@ cat <<EOF
 
   /* Exception handling  */
   .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
-  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
 
   /* Thread Local Storage sections  */
   .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
@@ -354,25 +402,24 @@ cat <<EOF
 
   .preinit_array   ${RELOCATING-0} :
   {
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
     KEEP (*(.preinit_array))
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
   }
   .init_array   ${RELOCATING-0} :
   {
-     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
+     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
      KEEP (*(SORT(.init_array.*)))
      KEEP (*(.init_array))
-     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
+     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
   }
   .fini_array   ${RELOCATING-0} :
   {
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
     KEEP (*(.fini_array))
     KEEP (*(SORT(.fini_array.*)))
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
   }
-
   ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
   ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
   .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
@@ -393,7 +440,7 @@ cat <<EOF
   {
     ${RELOCATING+${DATA_START_SYMBOLS}}
     *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
-    KEEP (*(.gnu.linkonce.d.*personality*))
+    ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))}
     ${CONSTRUCTING+SORT(CONSTRUCTORS)}
   }
   .data1        ${RELOCATING-0} : { *(.data1) }
@@ -407,7 +454,7 @@ cat <<EOF
   ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
   ${SDATA}
   ${OTHER_SDATA_SECTIONS}
-  ${RELOCATING+${DATA_END_SYMBOLS-_edata = .; PROVIDE (edata = .);}}
+  ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
   ${RELOCATING+__bss_start = .;}
   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
   ${SBSS}
@@ -419,14 +466,17 @@ cat <<EOF
    *(COMMON)
    /* Align here to ensure that the .bss section occupies space up to
       _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
   }
   ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  ${LARGE_SECTIONS}
+  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
   ${RELOCATING+${OTHER_END_SYMBOLS}}
-  ${RELOCATING+_end = .;}
-  ${RELOCATING+PROVIDE (end = .);}
+  ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
   ${RELOCATING+${DATA_SEGMENT_END}}
 
   /* Stabs debugging sections.  */
@@ -456,7 +506,7 @@ cat <<EOF
   .debug_pubnames 0 : { *(.debug_pubnames) }
 
   /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_info     0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
   .debug_abbrev   0 : { *(.debug_abbrev) }
   .debug_line     0 : { *(.debug_line) }
   .debug_frame    0 : { *(.debug_frame) }
@@ -470,6 +520,9 @@ cat <<EOF
   .debug_typenames 0 : { *(.debug_typenames) }
   .debug_varnames  0 : { *(.debug_varnames) }
 
+  ${TINY_DATA_SECTION}
+  ${TINY_BSS_SECTION}
+
   ${STACK_ADDR+${STACK}}
   ${OTHER_SECTIONS}
   ${RELOCATING+${OTHER_SYMBOLS}}