Initial creation of sourceware repository

1 files changed, 0 insertions, 470 deletions

diff --git a/gdb/ser-e7kpc.c b/gdb/ser-e7kpc.c
deleted file mode 100644
index 8be5db9b691..00000000000
--- a/gdb/ser-e7kpc.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/* Remote serial interface using Hitachi E7000 PC ISA card in a PC
-   Copyright 1994, 1999 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#if defined __GO32__ || defined _WIN32
-#include "defs.h"
-#include "serial.h"
-#include "gdb_string.h"
-
-/* MSVC uses strnicmp instead of strncasecmp */
-#ifdef _MSC_VER
-#define strncasecmp strnicmp
-#define WIN32_LEAN_AND_MEAN
-#endif
-
-#ifdef _WIN32
-#include <windows.h>
-#endif
-
-#ifdef __GO32__
-#include <sys/dos.h>
-#endif
-
-static int e7000pc_open PARAMS ((serial_t scb, const char *name));
-static void e7000pc_raw PARAMS ((serial_t scb));
-static int e7000pc_readchar PARAMS ((serial_t scb, int timeout));
-static int e7000pc_setbaudrate PARAMS ((serial_t scb, int rate));
-static int e7000pc_write PARAMS ((serial_t scb, const char *str, int len));
-static void e7000pc_close PARAMS ((serial_t scb));
-static serial_ttystate e7000pc_get_tty_state PARAMS ((serial_t scb));
-static int e7000pc_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
-
-#define OFF_DPD 	0x0000
-#define OFF_DDP 	0x1000
-#define OFF_CPD 	0x2000
-#define OFF_CDP 	0x2400
-#define OFF_FA  	0x3000
-#define OFF_FB  	0x3002
-#define OFF_FC  	0x3004
-#define OFF_IRQTOD	0x3008
-#define OFF_IRQTOP 	0x300a
-#define OFF_READY  	0x300c
-#define OFF_PON    	0x300e
-
-#define IDLE       0x0000           
-#define CMD_CI     0x4349           
-#define CMD_CO     0x434f           
-#define CMD_LO     0x4c4f           
-#define CMD_LS     0x4c53           
-#define CMD_SV     0x5356           
-#define CMD_SS     0x5353           
-#define CMD_OK     0x4f4b           
-#define CMD_ER     0x4552           
-#define CMD_NF     0x4e46           
-#define CMD_AB     0x4142           
-#define CMD_ED     0x4544           
-#define CMD_CE     0x4345           
-
-static unsigned long fa;
-static unsigned long irqtod;
-static unsigned long ready;
-static unsigned long fb;
-static unsigned long cpd ;
-static unsigned long cdp ;
-static unsigned long ready;
-static unsigned long pon;
-static unsigned long irqtop;
-static unsigned long board_at;
-
-#ifdef __GO32__
-
-#define SET_BYTE(x,y)   { char _buf = y;dosmemput(&_buf,1, x);}
-#define SET_WORD(x,y)   { short _buf = y;dosmemput(&_buf,2, x);}
-#define GET_BYTE(x)     ( dosmemget(x,1,&bb), bb)
-#define GET_WORD(x)     ( dosmemget(x,2,&sb), sb)
-static unsigned char bb;
-static unsigned short sb;
-
-#else /* win32 */
-
-#define SET_BYTE(x,y)   *(volatile unsigned char *)(x) = (y)
-#define SET_WORD(x,y)   *(volatile unsigned short *)(x) = (y)
-#define GET_BYTE(x)     (*(volatile unsigned char *)(x))
-#define GET_WORD(x)     (*(volatile unsigned short *)(x))
-#define dosmemget(FROM, LEN, TO) memcpy ((void *)(TO), (void *)(FROM), (LEN))
-#define dosmemput(FROM, LEN, TO) memcpy ((void *)(TO), (void *)(FROM), (LEN))
-#endif
-
-static struct sw 
-{
-  int sw;
-  int addr;
-} sigs[] = {
-  {0x14, 0xd0000},
-  {0x15, 0xd4000},
-  {0x16, 0xd8000},
-  {0x17, 0xdc000},
-  0};
-
-#ifdef _MSC_VER
-/* Get the base of the data segment.  This is needed to calculate the offset
-   between data segment addresses and the base of linear memory, which is where
-   device registers reside.  Note that this is really only necessary for
-   Win32s, since Win95 and NT keep the data segment at linear 0.  */
-
-static unsigned long
-get_ds_base (void)
-{
-  unsigned short dsval;
-  LDT_ENTRY ldt;
-  unsigned long dsbase;
-
-  __asm
-    {
-      mov dsval,ds
-    }
-
-  dsbase = 0;
-
-  GetThreadSelectorEntry (GetCurrentThread(), dsval, &ldt);
-
-  dsbase = ldt.HighWord.Bits.BaseHi << 24 | ldt.HighWord.Bits.BaseMid << 16
-	     | ldt.BaseLow;
-
-  return dsbase;
-}
-#else /* !_MSC_VER */
-#define get_ds_base() 0
-#endif /* _MSC_VER */ 
-
-static int
-e7000pc_init ()
-{
-  int try;
-  unsigned long dsbase;
-  
-  dsbase = get_ds_base ();
-
-  /* Look around in memory for the board's signature */
-
-  for (try = 0; sigs[try].sw; try++)
-    {
-      int val;
-      board_at = sigs[try].addr - dsbase;
-      fa = board_at + OFF_FA;
-      fb = board_at + OFF_FB;
-      cpd = board_at + OFF_CPD;
-      cdp = board_at + OFF_CDP;
-      ready =board_at + OFF_READY;
-      pon = board_at + OFF_PON;	      
-      irqtop = board_at + OFF_IRQTOP;
-      irqtod = board_at + OFF_IRQTOD;
-      
-      val = GET_WORD (ready);
-
-      if (val == (0xaaa0  | sigs[try].sw))
-	{
-	  if (GET_WORD (pon) & 0xf)
-	    {
-	      SET_WORD (fa, 0);
-	      SET_WORD (fb, 0);
-
-	      SET_WORD (irqtop, 1); /* Disable interrupts from e7000 */
-	      SET_WORD (ready, 1);
-	      printf_filtered ("\nConnected to the E7000PC at address 0x%x\n", 
-			       sigs[try].addr);
-	      return 1;	      
-	    }
-	  error ("The E7000 PC board is working, but the E7000 is turned off.\n");
-	  return 0;
-	}
-    }
-
-  error ("GDB cannot connect to the E7000 PC board, check that it is installed\n\
-and that the switch settings are correct.  Some other DOS programs can \n\
-stop the board from working.  Try starting from a very minimal boot, \n\
-perhaps you need to disable EMM386 over the region where the board has\n\
-its I/O space, remove other unneeded cards, etc etc\n");
-  return 0;
-
-}
-
-static int pbuf_size;
-static int pbuf_index;
-
-/* Return next byte from cdp.  If no more, then return -1.  */
-
-static int 
-e7000_get (void)
-{
-  static char pbuf[1000];
-  char tmp[1000];
-  int x;
-
-  if (pbuf_index < pbuf_size) 
-    {
-      x = pbuf[pbuf_index++];
-    }
-  else if ((GET_WORD (fb) & 1))
-    {
-      int i;
-      pbuf_size = GET_WORD (cdp + 2);
-
-      dosmemget (cdp + 8, pbuf_size + 1, tmp);
-
-      /* Tell the E7000 we've eaten */
-      SET_WORD (fb, 0);	
-      /* Swap it around */
-      for (i = 0; i < pbuf_size; i++) 
-	{
-	  pbuf[i] = tmp[i^1];
-	}
-      pbuf_index = 0;
-      x =  pbuf[pbuf_index++];
-    }
-  else 
-    { 
-      x = -1;
-    }
-  return x;
-}
-
-/* Works just like read(), except that it takes a TIMEOUT in seconds.  Note
-   that TIMEOUT == 0 is a poll, and TIMEOUT == -1 means wait forever. */
-
-static int
-dosasync_read (fd, buf, len, timeout)
-     int fd;
-     char *buf;
-     int len;
-     int timeout;
-
-{
-  long now;
-  long then;
-  int i = 0;
-
-  /* Then look for some more if we're still hungry */
-  time (&now);
-  then = now + timeout;
-  while (i < len)
-    {
-      int ch = e7000_get();
-      
-      /* While there's room in the buffer, and we've already
-	 read the stuff in, suck it over */
-      if (ch != -1) 
-	{
-	  buf[i++] = ch;
-	  while (i < len && pbuf_index < pbuf_size )
-	    {
-	      ch = e7000_get();
-	      if (ch == -1)
-		break;
-	      buf[i++] = ch;
-	    }
-	}
-
-      time (&now);
-
-      if (timeout == 0)
-	return i;
-      if (now >= then && timeout > 0)
-	{
-	  return i;
-	}
-    }
-  return len;
-}
-
-
-static int
-dosasync_write (fd, buf, len)
-     int fd;
-     const char *buf;
-     int len;
-{
-  int i;
-  char dummy[1000];  
-  
-  /* Construct copy locally */
-  ((short *)dummy)[0] = CMD_CI;
-  ((short *)dummy)[1] = len;
-  ((short *)dummy)[2] = 0;
-  ((short *)dummy)[3] = 0;
-  for (i = 0; i < len ; i++) 
-    {
-      dummy[8 + i ^ 1] = buf[i];
-    }
-
-  /* Wait for the card to get ready */
-  while (GET_WORD (fa) & 1) ;
-
-  /* Blast onto the ISA card */
-  dosmemput (dummy, 8 + len + 1,  cpd);
-
-  SET_WORD (fa, 1);
-  SET_WORD (irqtod, 1); /* Interrupt the E7000 */
-
-  return len;
-}
-
-static int
-e7000pc_open (scb, name)
-     serial_t scb;
-     const char *name;
-{
-  if (strncasecmp (name, "pc", 2) != 0)
-    {
-      errno = ENOENT;
-      return -1;
-    }
-
-  scb->fd = e7000pc_init ();
-
-  if (!scb->fd)
-    return -1;
-
-  return 0;
-}
-
-static int
-e7000pc_noop (scb)
-     serial_t scb;
-{
-  return 0;
-}
-
-static void
-e7000pc_raw (scb)
-     serial_t scb;
-{
-  /* Always in raw mode */
-}
-
-static int
-e7000pc_readchar (scb, timeout)
-     serial_t scb;
-     int timeout;
-{
-  char buf;
-
- top:
-
-  if (dosasync_read (scb->fd, &buf, 1, timeout))
-    {
-      if (buf == 0) goto top;
-      return buf;
-    }
-  else
-    return SERIAL_TIMEOUT;
-}
-
-struct e7000pc_ttystate {
-  int dummy;
-};
-
-/* e7000pc_{get set}_tty_state() are both dummys to fill out the function
-   vector.  Someday, they may do something real... */
-
-static serial_ttystate
-e7000pc_get_tty_state (scb)
-     serial_t scb;
-{
-  struct e7000pc_ttystate *state;
-
-  state = (struct e7000pc_ttystate *) xmalloc (sizeof *state);
-
-  return (serial_ttystate) state;
-}
-
-static int
-e7000pc_set_tty_state (scb, ttystate)
-     serial_t scb;
-     serial_ttystate ttystate;
-{
-  return 0;
-}
-
-static int
-e7000pc_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
-     serial_t scb;
-     serial_ttystate new_ttystate;
-     serial_ttystate old_ttystate;
-{
-  return 0;
-}
-
-static void
-e7000pc_print_tty_state (scb, ttystate)
-     serial_t scb;
-     serial_ttystate ttystate;
-{
-  /* Nothing to print.  */
-  return;
-}
-
-static int
-e7000pc_setbaudrate (scb, rate)
-     serial_t scb;
-     int rate;
-{
-  return 0;
-}
-
-static int
-e7000pc_write (scb, str, len)
-     serial_t scb;
-     const char *str;
-     int len;
-{
-  dosasync_write (scb->fd, str, len);
-
-  return 0;
-}
-
-static void
-e7000pc_close (scb)
-     serial_t scb;
-{
-}
-
-static struct serial_ops e7000pc_ops =
-{
-  "pc",
-  0,
-  e7000pc_open,
-  e7000pc_close,
-  e7000pc_readchar,
-  e7000pc_write,
-  e7000pc_noop,			/* flush output */
-  e7000pc_noop,			/* flush input */
-  e7000pc_noop,			/* send break -- currently used only for nindy */
-  e7000pc_raw,
-  e7000pc_get_tty_state,
-  e7000pc_set_tty_state,
-  e7000pc_print_tty_state,
-  e7000pc_noflush_set_tty_state,
-  e7000pc_setbaudrate,
-  e7000pc_noop,			/* wait for output to drain */
-};
-
-void
-_initialize_ser_e7000pc ()
-{
-  serial_add_interface (&e7000pc_ops);
-}
-#else
-
-void
-_initialize_ser_e7000pc ()
-{
-
-}
-#endif