or1k: Remove 64-bit support, it's not used and it breaks 32-bit hosts

Reported by Rich Felker when building on 32-bit hosts.  Backwards jump
negative offsets were not calculated correctly due to improper 32-bit
to 64-bit zero-extension.  The 64-bit fields are present because we
are mixing 32-bit and 64-bit architectures in our cpu descriptions.

Removing 64-bit fixes the issue.  We don't use 64-bit, there is an architecture
spec for 64-bit but no implementations or simulators.  My thought is if
we need them in the future we should do the proper work to support both
32-bit and 64-bit implementations co-existing then.

cpu/ChangeLog:

yyyy-mm-dd  Stafford Horne  <shorne@gmail.com>

	PR 25184
	* or1k.cpu (arch or1k): Remove or64 and or64nd machs.
	(ORBIS-MACHS, ORFPX32-MACHS): Remove pmacros.
	(cpu or1k64bf, mach or64, mach or64nd): Remove definitions.
	* or1kcommon.cpu (h-fdr): Remove hardware.
	* or1korfpx.cpu (rDDF, rADF, rBDF): Remove operand definitions.
	(float-regreg-insn): Remove lf- mnemonic -d instruction pattern.
	(float-setflag-insn-base): Remove lf-sf mnemonic -d pattern.
	(float-cust-insn): Remove "lf-cust" cust-num "-d" pattern.
	(lf-rem-d, lf-itof-d, lf-ftoi-d, lf-madd-d): Remove.

4 files changed, 16 insertions, 110 deletions

diff --git a/cpu/ChangeLog b/cpu/ChangeLog
index 2324006fb27..ef6d49aa776 100644
--- a/cpu/ChangeLog
+++ b/cpu/ChangeLog
@@ -1,3 +1,16 @@
+2020-05-19  Stafford Horne  <shorne@gmail.com>
+
+	PR 25184
+	* or1k.cpu (arch or1k): Remove or64 and or64nd machs.
+	(ORBIS-MACHS, ORFPX32-MACHS): Remove pmacros.
+	(cpu or1k64bf, mach or64, mach or64nd): Remove definitions.
+	* or1kcommon.cpu (h-fdr): Remove hardware.
+	* or1korfpx.cpu (rDDF, rADF, rBDF): Remove operand definitions.
+	(float-regreg-insn): Remove lf- mnemonic -d instruction pattern.
+	(float-setflag-insn-base): Remove lf-sf mnemonic -d pattern.
+	(float-cust-insn): Remove "lf-cust" cust-num "-d" pattern.
+	(lf-rem-d, lf-itof-d, lf-ftoi-d, lf-madd-d): Remove.
+
 2020-02-16  David Faust  <david.faust@oracle.com>
 
 	* bpf.cpu (define-cond-jump-insn): Renamed from djci.
diff --git a/cpu/or1k.cpu b/cpu/or1k.cpu
index b796862d1b5..9784f7a0fa8 100644
--- a/cpu/or1k.cpu
+++ b/cpu/or1k.cpu
@@ -31,7 +31,7 @@
   (comment "OpenRISC 1000")
   (default-alignment aligned)
   (insn-lsb0? #t)
-  (machs or32 or32nd or64 or64nd)
+  (machs or32 or32nd)
   (isas openrisc)
 )
 
@@ -44,10 +44,8 @@
   )
 
 (define-pmacro OR32-MACHS       or32,or32nd)
-(define-pmacro OR64-MACHS       or64,or64nd)
-(define-pmacro ORBIS-MACHS      or32,or32nd,or64,or64nd)
-(define-pmacro ORFPX32-MACHS    or32,or32nd,or64,or64nd)
-(define-pmacro ORFPX64-MACHS    or64,or64nd)
+(define-pmacro ORBIS-MACHS      or32,or32nd)
+(define-pmacro ORFPX32-MACHS    or32,or32nd)
 (define-pmacro ORFPX64A32-MACHS or32,or32nd) ; float64 for 32-bit machs
 
 (define-attr
@@ -100,33 +98,6 @@
       )
     )
 
-(if (keep-mach? (or64 or64nd))
-    (begin
-      (define-cpu
-        (name or1k64bf)
-        (comment "OpenRISC 1000 64-bit CPU family")
-        (insn-endian big)
-        (data-endian big)
-        (word-bitsize 64)
-        (file-transform "64")
-        )
-
-      (define-mach
-        (name or64)
-        (comment "Generic OpenRISC 1000 64-bit CPU")
-        (cpu or1k64bf)
-        (bfd-name "or1k64")
-        )
-
-      (define-mach
-        (name or64nd)
-        (comment "Generic OpenRISC 1000 ND 64-bit CPU with no branch delay slot")
-        (cpu or1k64bf)
-        (bfd-name "or1k64nd")
-        )
-      )
-    )
-
 (include "or1kcommon.cpu")
 (include "or1korbis.cpu")
 (include "or1korfpx.cpu")
diff --git a/cpu/or1kcommon.cpu b/cpu/or1kcommon.cpu
index 65154407df9..9f102c93a18 100644
--- a/cpu/or1kcommon.cpu
+++ b/cpu/or1kcommon.cpu
@@ -115,20 +115,6 @@
   )
 
 ;
-; Hardware: virtual registerts for FPU (double precision)
-;           mapped to GPRs
-;
-(define-hardware
-  (name h-fdr)
-  (comment "or64 floating point registers (double, virtual)")
-  (attrs VIRTUAL (MACH ORFPX64-MACHS))
-  (type register DF (32))
-  (indices keyword "" REG-INDICES)
-  (get (index) (subword DF (trunc DI (reg h-gpr index)) 0))
-  (set (index newval) (set UDI (reg h-gpr index) (zext UDI (subword DI newval 0))))
-  )
-
-;
 ; Register pairs are offset by 2 for registers r16 and above.  This is to
 ; be able to allow registers to be call saved in GCC across function calls.
 ;
diff --git a/cpu/or1korfpx.cpu b/cpu/or1korfpx.cpu
index f43522f2e63..0bd469cff59 100644
--- a/cpu/or1korfpx.cpu
+++ b/cpu/or1korfpx.cpu
@@ -84,10 +84,6 @@
 (dnop rASF "source register A (single floating point mode)"    ((MACH ORFPX32-MACHS)) h-fsr f-r2)
 (dnop rBSF "source register B (single floating point mode)"    ((MACH ORFPX32-MACHS)) h-fsr f-r3)
 
-(dnop rDDF "or64 destination register (double floating point mode)" ((MACH ORFPX64-MACHS)) h-fdr f-r1)
-(dnop rADF "or64 source register A (double floating point mode)"    ((MACH ORFPX64-MACHS)) h-fdr f-r2)
-(dnop rBDF "or64 source register B (double floating point mode)"    ((MACH ORFPX64-MACHS)) h-fdr f-r3)
-
 (define-pmacro (double-field-and-ops mnemonic reg offbit op-comment)
   (begin
     (define-multi-ifield
@@ -152,14 +148,6 @@
          (set SF rDSF (mnemonic SF rASF rBSF))
          ()
          )
-    (dni (.sym lf- mnemonic -d)
-         (.str "lf." mnemonic ".d reg/reg/reg")
-         ((MACH ORFPX64-MACHS))
-         (.str "lf." mnemonic ".d $rDDF,$rADF,$rBDF")
-         (+ OPC_FLOAT rDDF rADF rBDF (f-resv-10-3 0) (.sym OPC_FLOAT_REGREG_ (.upcase mnemonic) _D))
-         (set DF rDDF (mnemonic DF rADF rBDF))
-         ()
-         )
     (dni (.sym lf- mnemonic -d32)
          (.str "lf." mnemonic ".d regpair/regpair/regpair")
          ((MACH ORFPX64A32-MACHS))
@@ -185,15 +173,6 @@
      ()
      )
 
-(dni lf-rem-d
-     "lf.rem.d reg/reg/reg"
-     ((MACH ORFPX64-MACHS))
-     "lf.rem.d $rDDF,$rADF,$rBDF"
-     (+ OPC_FLOAT rDDF rADF rBDF (f-resv-10-3 0) OPC_FLOAT_REGREG_REM_D)
-     (set DF rDDF (rem DF rADF rBDF))
-     ()
-     )
-
 (dni lf-rem-d32
      "lf.rem.d regpair/regpair/regpair"
      ((MACH ORFPX64A32-MACHS))
@@ -221,15 +200,6 @@
      ()
      )
 
-(dni lf-itof-d
-     "lf.itof.d reg/reg"
-     ((MACH ORFPX64-MACHS))
-     "lf.itof.d $rDDF,$rA"
-     (+ OPC_FLOAT rDDF rA (f-r3 0) (f-resv-10-3 0) OPC_FLOAT_REGREG_ITOF_D)
-     (set DF rDDF (float DF (get-rounding-mode) rA))
-     ()
-     )
-
 (dni lf-itof-d32
      "lf.itof.d regpair/regpair"
      ((MACH ORFPX64A32-MACHS))
@@ -248,15 +218,6 @@
      ()
      )
 
-(dni lf-ftoi-d
-     "lf.ftoi.d reg/reg"
-     ((MACH ORFPX64-MACHS))
-     "lf.ftoi.d $rD,$rADF"
-     (+ OPC_FLOAT rD rADF (f-r3 0) (f-resv-10-3 0) OPC_FLOAT_REGREG_FTOI_D)
-     (set WI rD (fix WI (get-rounding-mode) rADF))
-     ()
-     )
-
 (dni lf-ftoi-d32
      "lf.ftoi.d regpair/regpair"
      ((MACH ORFPX64A32-MACHS))
@@ -276,14 +237,6 @@
          (symantics rtx-mnemonic SF rASF rBSF)
          ()
          )
-    (dni (.sym lf-sf mnemonic -d)
-         (.str "lf.sf" mnemonic ".d reg/reg")
-         ((MACH ORFPX64-MACHS))
-         (.str "lf.sf" mnemonic ".d $rADF,$rBDF")
-         (+ OPC_FLOAT (f-r1 0) rADF rBDF (f-resv-10-3 0) (.sym OPC_FLOAT_REGREG_SF (.upcase mnemonic) _D))
-         (symantics rtx-mnemonic DF rADF rBDF)
-         ()
-         )
     (dni (.sym lf-sf mnemonic -d32)
          (.str "lf.sf" mnemonic ".d regpair/regpair")
          ((MACH ORFPX64A32-MACHS))
@@ -336,15 +289,6 @@
      ()
      )
 
-(dni lf-madd-d
-     "lf.madd.d reg/reg/reg"
-     ((MACH ORFPX64-MACHS))
-     "lf.madd.d $rDDF,$rADF,$rBDF"
-     (+ OPC_FLOAT rDDF rADF rBDF (f-resv-10-3 0) OPC_FLOAT_REGREG_MADD_D)
-     (set DF rDDF (add DF (mul DF rADF rBDF) rDDF))
-     ()
-     )
-
 (dni lf-madd-d32
      "lf.madd.d regpair/regpair/regpair"
      ((MACH ORFPX64A32-MACHS))
@@ -364,14 +308,6 @@
          (nop)
          ()
          )
-    (dni (.sym "lf-cust" cust-num "-d")
-         (.str "lf.cust" cust-num ".d")
-         ((MACH ORFPX64-MACHS))
-         (.str "lf.cust" cust-num ".d")
-         (+ OPC_FLOAT (f-resv-25-5 0) rADF rBDF (f-resv-10-3 0) (.sym "OPC_FLOAT_REGREG_CUST" cust-num "_D"))
-         (nop)
-         ()
-         )
     (dni (.sym "lf-cust" cust-num "-d32")
          (.str "lf.cust" cust-num ".d")
          ((MACH ORFPX64A32-MACHS))