gdb: Restore old annotations behaviour when printing frame info

This undoes most of the changes from these commits:

  commit ec8e2b6d3051f0b4b2a8eee9917898e95046c62f
  Date:   Fri Jun 14 23:43:00 2019 +0100

      gdb: Don't allow annotations to influence what else GDB prints

  commit 0d3abd8cc936360f8c46502135edd2e646473438
  Date:   Wed Jun 12 22:34:26 2019 +0100

      gdb: Remove an update of current_source_line and current_source_symtab

as a result of the discussion here:

  https://sourceware.org/pipermail/gdb/2020-April/048468.html

Having taken time to reflect on the discussion, and reading the
documentation again I believe we should revert GDB's behaviour back to
how it used to be.

The original concern that triggered the initial patch was that when
annotations were on the current source and line were updated (inside
the annotation code), while when annotations are off this update would
not occur.  This was incorrect, as printing the source with the call
to print_source_lines does also update the current source and line.

Further, the documentation here:
  https://sourceware.org/gdb/current/onlinedocs/gdb/Source-Annotations.html#Source-Annotations

Clearly states:

  "The following annotation is used instead of displaying source code:

   ^Z^Zsource filename:line:character:middle:addr

   ..."

So it is documented that the 'source' annotation is a replacement for,
and not in addition to, actually printing the source lie.

There are still a few issues that I can see, these are:

  1. In source.c:info_line_command, when annotations are on we call
  annotate_source_line, however, if annotations are off then there is
  no corresponding call to print the source line.  This means that a
  if a user uses 'info line ...' with annotations on, and then does a
  'list', they will get different results than if they had done this
  with annotations off.

  2. It bothers me that the call to annotate_source_line returns a
  boolean, and that this controls a call to print_source_line (in
  stack.c:print_frame_info).

  The reason for this is that the source line annotation will only
  print something if the file is found, and the line number is in
  range for the file.

  It seems to me like an annotation should always be printed, either
  one that identifies the file and line, or one that identifies the
  file and line GDB would like to access, but couldn't.

  I considered changing this, but in the end decided not too, if I
  extend the existing 'source' annotation to print something in all
  cases then I risk breaking existing UIs that rely on the file and
  line always being valid.  If I add a new annotation then this might
  also break existing UIs that rely on GDB itself printing the error
  from within print_source_line.

Given that annotations is deprecated (as I understand it) mechanism
for UIs to interact with GDB (in favour of MI) I figure we should just
restore the old behaviour, and leave the mini-bugs in until someone
actually complains.

This isn't a straight revert of the two commits mentioned above.  I've
left annotate_source_line instead of going back to the original
identify_source_line, which lived in source.c, but was really
annotation related.  The API for setting the current source and line
has changed since the original patches, so I updated for that change
too.  Finally I wrote the code in stack.c so that we avoided an extra
level of indentation, which I felt made things easier to read.

gdb/ChangeLog:

	* annotate.c (annotate_source_line): Update return type, add call
	to update current symtab and line.
	* annotate.h (annotate_source_line): Update return type, and
	extend header comment.
	* source.c (info_line_command): Check annotation_level before
	calling annotate_source_line.
	* stack.c (print_frame_info): If calling annotate_source_line
	returns true, then don't print any other source line information.

gdb/testsuite/ChangeLog:

	* gdb.base/annota1.exp: Update expected results.
	* gdb.cp/annota2.exp: Update expected results, remove duplicate
	test name.
	* gdb.cp/annota3.exp: Update expected results.

9 files changed, 73 insertions, 20 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 0b38daf3e3d..31550d23b14 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,14 @@
+2020-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>
+
+	* annotate.c (annotate_source_line): Update return type, add call
+	to update current symtab and line.
+	* annotate.h (annotate_source_line): Update return type, and
+	extend header comment.
+	* source.c (info_line_command): Check annotation_level before
+	calling annotate_source_line.
+	* stack.c (print_frame_info): If calling annotate_source_line
+	returns true, then don't print any other source line information.
+
 2020-05-21  Simon Marchi  <simon.marchi@efficios.com>
 
 	* lm32-tdep.c (lm32_register_reggroup_p): Fix condition.
diff --git a/gdb/annotate.c b/gdb/annotate.c
index 6daa0c57017..0a4e2f27cac 100644
--- a/gdb/annotate.c
+++ b/gdb/annotate.c
@@ -435,7 +435,7 @@ annotate_source (const char *filename, int line, int character, int mid,
 
 /* See annotate.h.  */
 
-void
+bool
 annotate_source_line (struct symtab *s, int line, int mid_statement,
 		      CORE_ADDR pc)
 {
@@ -443,16 +443,25 @@ annotate_source_line (struct symtab *s, int line, int mid_statement,
     {
       const std::vector<off_t> *offsets;
       if (!g_source_cache.get_line_charpos (s, &offsets))
-	return;
-
-      /* Don't index off the end of the line_charpos array.  */
+	return false;
       if (line > offsets->size ())
-	return;
+	return false;
 
       annotate_source (s->fullname, line, (int) (*offsets)[line - 1],
 		       mid_statement, SYMTAB_OBJFILE (s)->arch (),
 		       pc);
+
+      /* Update the current symtab and line.  */
+      symtab_and_line sal;
+      sal.pspace = SYMTAB_PSPACE (s);
+      sal.symtab = s;
+      sal.line = line;
+      set_current_source_symtab_and_line (sal);
+
+      return true;
     }
+
+  return false;
 }
 
 
diff --git a/gdb/annotate.h b/gdb/annotate.h
index b45d882dc0e..70c2f280507 100644
--- a/gdb/annotate.h
+++ b/gdb/annotate.h
@@ -92,8 +92,20 @@ struct annotate_arg_emitter
    character position.
 
    MID_STATEMENT is nonzero if the PC is not at the beginning of that
-   line.  */
-extern void annotate_source_line (struct symtab *s, int line,
+   line.
+
+   The current symtab and line is updated to reflect S and LINE.
+
+   Return true if the annotation was printed and the current symtab and
+   line were updated, otherwise return false, which can happen if the
+   source file for S can't be found, or LINE is out of range.
+
+   This does leave GDB in the weird situation where, even when annotations
+   are on, we only sometimes print the annotation, and only sometimes
+   update the current symtab and line.  However, this particular annotation
+   has behaved this way for some time, and front ends that still use
+   annotations now depend on this behaviour.  */
+extern bool annotate_source_line (struct symtab *s, int line,
 				  int mid_statement, CORE_ADDR pc);
 
 extern void annotate_frame_begin (int, struct gdbarch *, CORE_ADDR);
diff --git a/gdb/source.c b/gdb/source.c
index b94c6af487d..0c2b5a4f83d 100644
--- a/gdb/source.c
+++ b/gdb/source.c
@@ -1532,7 +1532,7 @@ info_line_command (const char *arg, int from_tty)
 
 	  /* If this is the only line, show the source code.  If it could
 	     not find the file, don't do anything special.  */
-	  if (sals.size () == 1)
+	  if (annotation_level > 0 && sals.size () == 1)
 	    annotate_source_line (sal.symtab, sal.line, 0, start_pc);
 	}
       else
diff --git a/gdb/stack.c b/gdb/stack.c
index d7e21205411..265e764dc24 100644
--- a/gdb/stack.c
+++ b/gdb/stack.c
@@ -1126,10 +1126,25 @@ print_frame_info (const frame_print_options &fp_opts,
     {
       int mid_statement = ((print_what == SRC_LINE)
 			   && frame_show_address (frame, sal));
-      annotate_source_line (sal.symtab, sal.line, mid_statement,
-			    get_frame_pc (frame));
-
-      if (deprecated_print_frame_info_listing_hook)
+      if (annotation_level > 0
+	  && annotate_source_line (sal.symtab, sal.line, mid_statement,
+				   get_frame_pc (frame)))
+	{
+	  /* The call to ANNOTATE_SOURCE_LINE already printed the
+	     annotation for this source line, so we avoid the two cases
+	     below and do not print the actual source line.  The
+	     documentation for annotations makes it clear that the source
+	     line annotation is printed __instead__ of printing the source
+	     line, not as well as.
+
+	     However, if we fail to print the source line, which usually
+	     means either the source file is missing, or the requested
+	     line is out of range of the file, then we don't print the
+	     source annotation, and will pass through the "normal" print
+	     source line code below, the expectation is that this code
+	     will print an appropriate error.  */
+	}
+      else if (deprecated_print_frame_info_listing_hook)
 	deprecated_print_frame_info_listing_hook (sal.symtab, sal.line,
 						  sal.line + 1, 0);
       else
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 050a793ed05..2edec92f0d4 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,10 @@
+2020-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>
+
+	* gdb.base/annota1.exp: Update expected results.
+	* gdb.cp/annota2.exp: Update expected results, remove duplicate
+	test name.
+	* gdb.cp/annota3.exp: Update expected results.
+
 2020-05-20  Simon Marchi  <simon.marchi@efficios.com>
 
 	PR gdb/26016
diff --git a/gdb/testsuite/gdb.base/annota1.exp b/gdb/testsuite/gdb.base/annota1.exp
index 829d144cc20..2fdfd65ce86 100644
--- a/gdb/testsuite/gdb.base/annota1.exp
+++ b/gdb/testsuite/gdb.base/annota1.exp
@@ -268,10 +268,10 @@ if [target_info exists gdb,nosignals] {
     unsupported "backtrace @ signal handler"
 } else {
     gdb_test_multiple "signal SIGUSR1" "send SIGUSR1" {
-	-re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n$decimal\[^\r\n\]+\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+	-re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
 	    pass $gdb_test_name
 	}
-	-re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n$decimal\[^\r\n\]+\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+	-re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
 	    setup_xfail "*-*-*" 1270
 	    fail $gdb_test_name
 	}
diff --git a/gdb/testsuite/gdb.cp/annota2.exp b/gdb/testsuite/gdb.cp/annota2.exp
index 1b4f04bb445..2c36c5854ed 100644
--- a/gdb/testsuite/gdb.cp/annota2.exp
+++ b/gdb/testsuite/gdb.cp/annota2.exp
@@ -73,9 +73,9 @@ gdb_expect {
     timeout	            { fail "annotation set at level 2 (timeout)" }
   }
 
-gdb_test_multiple "run" "run until main breakpoint" {
+gdb_test_multiple "run" "run until main breakpoint, first time" {
     -re "$main_line.*$gdb_prompt$" {
-	pass "run until main breakpoint"
+	pass $gdb_test_name
     }
 }
 
@@ -189,9 +189,9 @@ set main_line 22
 # run program up to breakpoint.
 #
 
-gdb_test_multiple "run" "run until main breakpoint" {
+gdb_test_multiple "run" "run until main breakpoint, second time" {
     -re "$main_line.*$gdb_prompt$"    {
-	pass "run until main breakpoint"
+	pass $gdb_test_name
     }
 }
 
@@ -243,7 +243,6 @@ set pat [multi_line "" \
 	     "" \
 	     "" \
 	     "\032\032source .*$srcfile.*beg:$hex" \
-	     "$decimal\[^\r\n\]+" \
 	     "" \
 	     "\032\032frame-end" \
 	     "" \
diff --git a/gdb/testsuite/gdb.cp/annota3.exp b/gdb/testsuite/gdb.cp/annota3.exp
index 6580f469e79..62d522083b6 100644
--- a/gdb/testsuite/gdb.cp/annota3.exp
+++ b/gdb/testsuite/gdb.cp/annota3.exp
@@ -164,7 +164,7 @@ gdb_expect_list "set watch on a.x" "$gdb_prompt$" {
 # annotate-watchpoint
 #
 gdb_test_multiple "next" "watch triggered on a.x" {
-    -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n(\032\032frame-begin 0 0x\[0-9a-z\]+\r\n|)main \\(\\) at .*$srcfile:$decimal\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n$decimal\[^\r\n\]+\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" { 
+    -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n(\032\032frame-begin 0 0x\[0-9a-z\]+\r\n|)main \\(\\) at .*$srcfile:$decimal\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" {
 	pass "watch triggered on a.x"
     }
 }