diff options
Diffstat (limited to 'doc/bash.0')
| -rw-r--r-- | doc/bash.0 | 2509 |
1 files changed, 1269 insertions, 1240 deletions
@@ -382,24 +382,24 @@ SSHHEELLLL GGRRAAMMMMAARR An additional binary operator, ==~~, is available, with the same precedence as ==== and !!==. When it is used, the string to the - right of the operator is considered an extended regular expres- - sion and matched accordingly (as in _r_e_g_e_x(3)). The return value - is 0 if the string matches the pattern, and 1 otherwise. If the - regular expression is syntactically incorrect, the conditional - expression's return value is 2. If the nnooccaasseemmaattcchh shell option - is enabled, the match is performed without regard to the case of - alphabetic characters. Any part of the pattern may be quoted to - force the quoted portion to be matched as a string. Bracket - expressions in regular expressions must be treated carefully, - since normal quoting characters lose their meanings between - brackets. If the pattern is stored in a shell variable, quoting - the variable expansion forces the entire pattern to be matched - as a string. Substrings matched by parenthesized subexpressions - within the regular expression are saved in the array variable - BBAASSHH__RREEMMAATTCCHH. The element of BBAASSHH__RREEMMAATTCCHH with index 0 is the - portion of the string matching the entire regular expression. - The element of BBAASSHH__RREEMMAATTCCHH with index _n is the portion of the - string matching the _nth parenthesized subexpression. + right of the operator is considered a POSIX extended regular + expression and matched accordingly (as in _r_e_g_e_x(3)). The return + value is 0 if the string matches the pattern, and 1 otherwise. + If the regular expression is syntactically incorrect, the condi- + tional expression's return value is 2. If the nnooccaasseemmaattcchh shell + option is enabled, the match is performed without regard to the + case of alphabetic characters. Any part of the pattern may be + quoted to force the quoted portion to be matched as a string. + Bracket expressions in regular expressions must be treated care- + fully, since normal quoting characters lose their meanings + between brackets. If the pattern is stored in a shell variable, + quoting the variable expansion forces the entire pattern to be + matched as a string. Substrings matched by parenthesized subex- + pressions within the regular expression are saved in the array + variable BBAASSHH__RREEMMAATTCCHH. The element of BBAASSHH__RREEMMAATTCCHH with index 0 + is the portion of the string matching the entire regular expres- + sion. The element of BBAASSHH__RREEMMAATTCCHH with index _n is the portion + of the string matching the _nth parenthesized subexpression. Expressions may be combined using the following operators, listed in decreasing order of precedence: @@ -735,80 +735,86 @@ PPAARRAAMMEETTEERRSS is the first character of the value of the IIFFSS variable. If IIFFSS is unset, the parameters are separated by spaces. If IIFFSS is null, the parameters are joined without intervening separators. - @@ Expands to the positional parameters, starting from one. When + @@ Expands to the positional parameters, starting from one. In + contexts where word splitting is performed, this expands each + positional parameter to a separate word; if not within double + quotes, these words are subject to word splitting. In contexts + where word splitting is not performed, this expands to a single + word with each positional parameter separated by a space. When the expansion occurs within double quotes, each parameter expands to a separate word. That is, "$$@@" is equivalent to "$$11" - "$$22" ... If the double-quoted expansion occurs within a word, - the expansion of the first parameter is joined with the begin- - ning part of the original word, and the expansion of the last - parameter is joined with the last part of the original word. - When there are no positional parameters, "$$@@" and $$@@ expand to + "$$22" ... If the double-quoted expansion occurs within a word, + the expansion of the first parameter is joined with the begin- + ning part of the original word, and the expansion of the last + parameter is joined with the last part of the original word. + When there are no positional parameters, "$$@@" and $$@@ expand to nothing (i.e., they are removed). ## Expands to the number of positional parameters in decimal. - ?? Expands to the exit status of the most recently executed fore- + ?? Expands to the exit status of the most recently executed fore- ground pipeline. - -- Expands to the current option flags as specified upon invoca- - tion, by the sseett builtin command, or those set by the shell + -- Expands to the current option flags as specified upon invoca- + tion, by the sseett builtin command, or those set by the shell itself (such as the --ii option). - $$ Expands to the process ID of the shell. In a () subshell, it - expands to the process ID of the current shell, not the sub- + $$ Expands to the process ID of the shell. In a () subshell, it + expands to the process ID of the current shell, not the sub- shell. - !! Expands to the process ID of the job most recently placed into - the background, whether executed as an asynchronous command or + !! Expands to the process ID of the job most recently placed into + the background, whether executed as an asynchronous command or using the bbgg builtin (see JJOOBB CCOONNTTRROOLL below). - 00 Expands to the name of the shell or shell script. This is set + 00 Expands to the name of the shell or shell script. This is set at shell initialization. If bbaasshh is invoked with a file of com- - mands, $$00 is set to the name of that file. If bbaasshh is started - with the --cc option, then $$00 is set to the first argument after - the string to be executed, if one is present. Otherwise, it is - set to the filename used to invoke bbaasshh, as given by argument + mands, $$00 is set to the name of that file. If bbaasshh is started + with the --cc option, then $$00 is set to the first argument after + the string to be executed, if one is present. Otherwise, it is + set to the filename used to invoke bbaasshh, as given by argument zero. - __ At shell startup, set to the absolute pathname used to invoke - the shell or shell script being executed as passed in the envi- - ronment or argument list. Subsequently, expands to the last - argument to the previous command, after expansion. Also set to - the full pathname used to invoke each command executed and + __ At shell startup, set to the absolute pathname used to invoke + the shell or shell script being executed as passed in the envi- + ronment or argument list. Subsequently, expands to the last + argument to the previous command, after expansion. Also set to + the full pathname used to invoke each command executed and placed in the environment exported to that command. When check- - ing mail, this parameter holds the name of the mail file cur- + ing mail, this parameter holds the name of the mail file cur- rently being checked. SShheellll VVaarriiaabblleess The following variables are set by the shell: - BBAASSHH Expands to the full filename used to invoke this instance of + BBAASSHH Expands to the full filename used to invoke this instance of bbaasshh. BBAASSHHOOPPTTSS - A colon-separated list of enabled shell options. Each word in - the list is a valid argument for the --ss option to the sshhoopptt + A colon-separated list of enabled shell options. Each word in + the list is a valid argument for the --ss option to the sshhoopptt builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below). The options - appearing in BBAASSHHOOPPTTSS are those reported as _o_n by sshhoopptt. If - this variable is in the environment when bbaasshh starts up, each - shell option in the list will be enabled before reading any + appearing in BBAASSHHOOPPTTSS are those reported as _o_n by sshhoopptt. If + this variable is in the environment when bbaasshh starts up, each + shell option in the list will be enabled before reading any startup files. This variable is read-only. BBAASSHHPPIIDD - Expands to the process ID of the current bbaasshh process. This - differs from $$$$ under certain circumstances, such as subshells - that do not require bbaasshh to be re-initialized. Assignments to - BBAASSHHPPIIDD have no effect. If BBAASSHHPPIIDD is unset, it loses its spe- + Expands to the process ID of the current bbaasshh process. This + differs from $$$$ under certain circumstances, such as subshells + that do not require bbaasshh to be re-initialized. Assignments to + BBAASSHHPPIIDD have no effect. If BBAASSHHPPIIDD is unset, it loses its spe- cial properties, even if it is subsequently reset. BBAASSHH__AALLIIAASSEESS - An associative array variable whose members correspond to the - internal list of aliases as maintained by the aalliiaass builtin. - Elements added to this array appear in the alias list; however, - unsetting array elements currently does not cause aliases to be + An associative array variable whose members correspond to the + internal list of aliases as maintained by the aalliiaass builtin. + Elements added to this array appear in the alias list; however, + unsetting array elements currently does not cause aliases to be removed from the alias list. If BBAASSHH__AALLIIAASSEESS is unset, it loses its special properties, even if it is subsequently reset. BBAASSHH__AARRGGCC - An array variable whose values are the number of parameters in + An array variable whose values are the number of parameters in each frame of the current bbaasshh execution call stack. The number - of parameters to the current subroutine (shell function or - script executed with .. or ssoouurrccee) is at the top of the stack. - When a subroutine is executed, the number of parameters passed + of parameters to the current subroutine (shell function or + script executed with .. or ssoouurrccee) is at the top of the stack. + When a subroutine is executed, the number of parameters passed is pushed onto BBAASSHH__AARRGGCC. The shell sets BBAASSHH__AARRGGCC only when in - extended debugging mode (see the description of the eexxttddeebbuugg - option to the sshhoopptt builtin below). Setting eexxttddeebbuugg after the - shell has started to execute a script may result in inconsistent - values. + extended debugging mode (see the description of the eexxttddeebbuugg + option to the sshhoopptt builtin below). Setting eexxttddeebbuugg after the + shell has started to execute a script, or referencing this vari- + able when eexxttddeebbuugg is not set, may result in inconsistent val- + ues. BBAASSHH__AARRGGVV An array variable containing all of the parameters in the cur- rent bbaasshh execution call stack. The final parameter of the last @@ -818,59 +824,60 @@ PPAARRAAMMEETTEERRSS shell sets BBAASSHH__AARRGGVV only when in extended debugging mode (see the description of the eexxttddeebbuugg option to the sshhoopptt builtin below). Setting eexxttddeebbuugg after the shell has started to execute - a script may result in inconsistent values. + a script, or referencing this variable when eexxttddeebbuugg is not set, + may result in inconsistent values. BBAASSHH__AARRGGVV00 - When referenced, this variable expands to the name of the shell + When referenced, this variable expands to the name of the shell or shell script (identical to $$00; see the description of special - parameter 0 above). Assignment to BBAASSHH__AARRGGVV00 causes the value - assigned to also be assigned to $$00. If BBAASSHH__AARRGGVV00 is unset, it + parameter 0 above). Assignment to BBAASSHH__AARRGGVV00 causes the value + assigned to also be assigned to $$00. If BBAASSHH__AARRGGVV00 is unset, it loses its special properties, even if it is subsequently reset. BBAASSHH__CCMMDDSS - An associative array variable whose members correspond to the - internal hash table of commands as maintained by the hhaasshh + An associative array variable whose members correspond to the + internal hash table of commands as maintained by the hhaasshh builtin. Elements added to this array appear in the hash table; - however, unsetting array elements currently does not cause com- - mand names to be removed from the hash table. If BBAASSHH__CCMMDDSS is - unset, it loses its special properties, even if it is subse- + however, unsetting array elements currently does not cause com- + mand names to be removed from the hash table. If BBAASSHH__CCMMDDSS is + unset, it loses its special properties, even if it is subse- quently reset. BBAASSHH__CCOOMMMMAANNDD - The command currently being executed or about to be executed, + The command currently being executed or about to be executed, unless the shell is executing a command as the result of a trap, - in which case it is the command executing at the time of the + in which case it is the command executing at the time of the trap. BBAASSHH__EEXXEECCUUTTIIOONN__SSTTRRIINNGG The command argument to the --cc invocation option. BBAASSHH__LLIINNEENNOO - An array variable whose members are the line numbers in source - files where each corresponding member of FFUUNNCCNNAAMMEE was invoked. + An array variable whose members are the line numbers in source + files where each corresponding member of FFUUNNCCNNAAMMEE was invoked. $${{BBAASSHH__LLIINNEENNOO[[_$_i]]}} is the line number in the source file ($${{BBAASSHH__SSOOUURRCCEE[[_$_i_+_1]]}}) where $${{FFUUNNCCNNAAMMEE[[_$_i]]}} was called (or - $${{BBAASSHH__LLIINNEENNOO[[_$_i_-_1]]}} if referenced within another shell func- + $${{BBAASSHH__LLIINNEENNOO[[_$_i_-_1]]}} if referenced within another shell func- tion). Use LLIINNEENNOO to obtain the current line number. BBAASSHH__LLOOAADDAABBLLEESS__PPAATTHH - A colon-separated list of directories in which the shell looks - for dynamically loadable builtins specified by the eennaabbllee com- + A colon-separated list of directories in which the shell looks + for dynamically loadable builtins specified by the eennaabbllee com- mand. BBAASSHH__RREEMMAATTCCHH - An array variable whose members are assigned by the ==~~ binary - operator to the [[[[ conditional command. The element with index - 0 is the portion of the string matching the entire regular - expression. The element with index _n is the portion of the + An array variable whose members are assigned by the ==~~ binary + operator to the [[[[ conditional command. The element with index + 0 is the portion of the string matching the entire regular + expression. The element with index _n is the portion of the string matching the _nth parenthesized subexpression. This vari- able is read-only. BBAASSHH__SSOOUURRCCEE - An array variable whose members are the source filenames where - the corresponding shell function names in the FFUUNNCCNNAAMMEE array - variable are defined. The shell function $${{FFUUNNCCNNAAMMEE[[_$_i]]}} is - defined in the file $${{BBAASSHH__SSOOUURRCCEE[[_$_i]]}} and called from + An array variable whose members are the source filenames where + the corresponding shell function names in the FFUUNNCCNNAAMMEE array + variable are defined. The shell function $${{FFUUNNCCNNAAMMEE[[_$_i]]}} is + defined in the file $${{BBAASSHH__SSOOUURRCCEE[[_$_i]]}} and called from $${{BBAASSHH__SSOOUURRCCEE[[_$_i_+_1]]}}. BBAASSHH__SSUUBBSSHHEELLLL - Incremented by one within each subshell or subshell environment - when the shell begins executing in that environment. The ini- + Incremented by one within each subshell or subshell environment + when the shell begins executing in that environment. The ini- tial value is 0. BBAASSHH__VVEERRSSIINNFFOO A readonly array variable whose members hold version information - for this instance of bbaasshh. The values assigned to the array + for this instance of bbaasshh. The values assigned to the array members are as follows: BBAASSHH__VVEERRSSIINNFFOO[[0]] The major version number (the _r_e_l_e_a_s_e). BBAASSHH__VVEERRSSIINNFFOO[[1]] The minor version number (the _v_e_r_s_i_o_n). @@ -879,137 +886,137 @@ PPAARRAAMMEETTEERRSS BBAASSHH__VVEERRSSIINNFFOO[[4]] The release status (e.g., _b_e_t_a_1). BBAASSHH__VVEERRSSIINNFFOO[[5]] The value of MMAACCHHTTYYPPEE. BBAASSHH__VVEERRSSIIOONN - Expands to a string describing the version of this instance of + Expands to a string describing the version of this instance of bbaasshh. CCOOMMPP__CCWWOORRDD - An index into $${{CCOOMMPP__WWOORRDDSS}} of the word containing the current + An index into $${{CCOOMMPP__WWOORRDDSS}} of the word containing the current cursor position. This variable is available only in shell func- - tions invoked by the programmable completion facilities (see + tions invoked by the programmable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below). CCOOMMPP__KKEEYY The key (or final key of a key sequence) used to invoke the cur- rent completion function. CCOOMMPP__LLIINNEE - The current command line. This variable is available only in - shell functions and external commands invoked by the program- + The current command line. This variable is available only in + shell functions and external commands invoked by the program- mable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below). CCOOMMPP__PPOOIINNTT - The index of the current cursor position relative to the begin- - ning of the current command. If the current cursor position is + The index of the current cursor position relative to the begin- + ning of the current command. If the current cursor position is at the end of the current command, the value of this variable is - equal to $${{##CCOOMMPP__LLIINNEE}}. This variable is available only in - shell functions and external commands invoked by the program- + equal to $${{##CCOOMMPP__LLIINNEE}}. This variable is available only in + shell functions and external commands invoked by the program- mable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below). CCOOMMPP__TTYYPPEE - Set to an integer value corresponding to the type of completion - attempted that caused a completion function to be called: _T_A_B, - for normal completion, _?, for listing completions after succes- - sive tabs, _!, for listing alternatives on partial word comple- - tion, _@, to list completions if the word is not unmodified, or - _%, for menu completion. This variable is available only in - shell functions and external commands invoked by the program- + Set to an integer value corresponding to the type of completion + attempted that caused a completion function to be called: _T_A_B, + for normal completion, _?, for listing completions after succes- + sive tabs, _!, for listing alternatives on partial word comple- + tion, _@, to list completions if the word is not unmodified, or + _%, for menu completion. This variable is available only in + shell functions and external commands invoked by the program- mable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below). CCOOMMPP__WWOORRDDBBRREEAAKKSS - The set of characters that the rreeaaddlliinnee library treats as word - separators when performing word completion. If CCOOMMPP__WWOORRDDBBRREEAAKKSS - is unset, it loses its special properties, even if it is subse- + The set of characters that the rreeaaddlliinnee library treats as word + separators when performing word completion. If CCOOMMPP__WWOORRDDBBRREEAAKKSS + is unset, it loses its special properties, even if it is subse- quently reset. CCOOMMPP__WWOORRDDSS - An array variable (see AArrrraayyss below) consisting of the individ- - ual words in the current command line. The line is split into - words as rreeaaddlliinnee would split it, using CCOOMMPP__WWOORRDDBBRREEAAKKSS as + An array variable (see AArrrraayyss below) consisting of the individ- + ual words in the current command line. The line is split into + words as rreeaaddlliinnee would split it, using CCOOMMPP__WWOORRDDBBRREEAAKKSS as described above. This variable is available only in shell func- - tions invoked by the programmable completion facilities (see + tions invoked by the programmable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below). - CCOOPPRROOCC An array variable (see AArrrraayyss below) created to hold the file - descriptors for output from and input to an unnamed coprocess + CCOOPPRROOCC An array variable (see AArrrraayyss below) created to hold the file + descriptors for output from and input to an unnamed coprocess (see CCoopprroocceesssseess above). DDIIRRSSTTAACCKK An array variable (see AArrrraayyss below) containing the current con- - tents of the directory stack. Directories appear in the stack - in the order they are displayed by the ddiirrss builtin. Assigning + tents of the directory stack. Directories appear in the stack + in the order they are displayed by the ddiirrss builtin. Assigning to members of this array variable may be used to modify directo- - ries already in the stack, but the ppuusshhdd and ppooppdd builtins must + ries already in the stack, but the ppuusshhdd and ppooppdd builtins must be used to add and remove directories. Assignment to this vari- - able will not change the current directory. If DDIIRRSSTTAACCKK is - unset, it loses its special properties, even if it is subse- + able will not change the current directory. If DDIIRRSSTTAACCKK is + unset, it loses its special properties, even if it is subse- quently reset. EEPPOOCCHHRREEAALLTTIIMMEE Each time this parameter is referenced, it expands to the number - of seconds since the Unix Epoch (see _t_i_m_e(3)) as a floating + of seconds since the Unix Epoch (see _t_i_m_e(3)) as a floating point value with micro-second granularity. Assignments to - EEPPOOCCHHRREEAALLTTIIMMEE are ignored. If EEPPOOCCHHRREEAALLTTIIMMEE is unset, it loses + EEPPOOCCHHRREEAALLTTIIMMEE are ignored. If EEPPOOCCHHRREEAALLTTIIMMEE is unset, it loses its special properties, even if it is subsequently reset. EEPPOOCCHHSSEECCOONNDDSS Each time this parameter is referenced, it expands to the number - of seconds since the Unix Epoch (see _t_i_m_e(3)). Assignments to - EEPPOOCCHHSSEECCOONNDDSS are ignored. If EEPPOOCCHHSSEECCOONNDDSS is unset, it loses + of seconds since the Unix Epoch (see _t_i_m_e(3)). Assignments to + EEPPOOCCHHSSEECCOONNDDSS are ignored. If EEPPOOCCHHSSEECCOONNDDSS is unset, it loses its special properties, even if it is subsequently reset. - EEUUIIDD Expands to the effective user ID of the current user, initial- + EEUUIIDD Expands to the effective user ID of the current user, initial- ized at shell startup. This variable is readonly. FFUUNNCCNNAAMMEE - An array variable containing the names of all shell functions + An array variable containing the names of all shell functions currently in the execution call stack. The element with index 0 is the name of any currently-executing shell function. The bot- - tom-most element (the one with the highest index) is "main". - This variable exists only when a shell function is executing. - Assignments to FFUUNNCCNNAAMMEE have no effect. If FFUUNNCCNNAAMMEE is unset, - it loses its special properties, even if it is subsequently + tom-most element (the one with the highest index) is "main". + This variable exists only when a shell function is executing. + Assignments to FFUUNNCCNNAAMMEE have no effect. If FFUUNNCCNNAAMMEE is unset, + it loses its special properties, even if it is subsequently reset. - This variable can be used with BBAASSHH__LLIINNEENNOO and BBAASSHH__SSOOUURRCCEE. - Each element of FFUUNNCCNNAAMMEE has corresponding elements in - BBAASSHH__LLIINNEENNOO and BBAASSHH__SSOOUURRCCEE to describe the call stack. For - instance, $${{FFUUNNCCNNAAMMEE[[_$_i]]}} was called from the file - $${{BBAASSHH__SSOOUURRCCEE[[_$_i_+_1]]}} at line number $${{BBAASSHH__LLIINNEENNOO[[_$_i]]}}. The + This variable can be used with BBAASSHH__LLIINNEENNOO and BBAASSHH__SSOOUURRCCEE. + Each element of FFUUNNCCNNAAMMEE has corresponding elements in + BBAASSHH__LLIINNEENNOO and BBAASSHH__SSOOUURRCCEE to describe the call stack. For + instance, $${{FFUUNNCCNNAAMMEE[[_$_i]]}} was called from the file + $${{BBAASSHH__SSOOUURRCCEE[[_$_i_+_1]]}} at line number $${{BBAASSHH__LLIINNEENNOO[[_$_i]]}}. The ccaalllleerr builtin displays the current call stack using this infor- mation. - GGRROOUUPPSS An array variable containing the list of groups of which the + GGRROOUUPPSS An array variable containing the list of groups of which the current user is a member. Assignments to GGRROOUUPPSS have no effect. - If GGRROOUUPPSS is unset, it loses its special properties, even if it + If GGRROOUUPPSS is unset, it loses its special properties, even if it is subsequently reset. HHIISSTTCCMMDD The history number, or index in the history list, of the current - command. If HHIISSTTCCMMDD is unset, it loses its special properties, + command. If HHIISSTTCCMMDD is unset, it loses its special properties, even if it is subsequently reset. HHOOSSTTNNAAMMEE Automatically set to the name of the current host. HHOOSSTTTTYYPPEE - Automatically set to a string that uniquely describes the type - of machine on which bbaasshh is executing. The default is system- + Automatically set to a string that uniquely describes the type + of machine on which bbaasshh is executing. The default is system- dependent. - LLIINNEENNOO Each time this parameter is referenced, the shell substitutes a - decimal number representing the current sequential line number - (starting with 1) within a script or function. When not in a - script or function, the value substituted is not guaranteed to + LLIINNEENNOO Each time this parameter is referenced, the shell substitutes a + decimal number representing the current sequential line number + (starting with 1) within a script or function. When not in a + script or function, the value substituted is not guaranteed to be meaningful. If LLIINNEENNOO is unset, it loses its special proper- ties, even if it is subsequently reset. MMAACCHHTTYYPPEE - Automatically set to a string that fully describes the system - type on which bbaasshh is executing, in the standard GNU _c_p_u_-_c_o_m_- + Automatically set to a string that fully describes the system + type on which bbaasshh is executing, in the standard GNU _c_p_u_-_c_o_m_- _p_a_n_y_-_s_y_s_t_e_m format. The default is system-dependent. MMAAPPFFIILLEE - An array variable (see AArrrraayyss below) created to hold the text + An array variable (see AArrrraayyss below) created to hold the text read by the mmaappffiillee builtin when no variable name is supplied. OOLLDDPPWWDD The previous working directory as set by the ccdd command. - OOPPTTAARRGG The value of the last option argument processed by the ggeettooppttss + OOPPTTAARRGG The value of the last option argument processed by the ggeettooppttss builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below). - OOPPTTIINNDD The index of the next argument to be processed by the ggeettooppttss + OOPPTTIINNDD The index of the next argument to be processed by the ggeettooppttss builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below). - OOSSTTYYPPEE Automatically set to a string that describes the operating sys- - tem on which bbaasshh is executing. The default is system-depen- + OOSSTTYYPPEE Automatically set to a string that describes the operating sys- + tem on which bbaasshh is executing. The default is system-depen- dent. PPIIPPEESSTTAATTUUSS - An array variable (see AArrrraayyss below) containing a list of exit - status values from the processes in the most-recently-executed + An array variable (see AArrrraayyss below) containing a list of exit + status values from the processes in the most-recently-executed foreground pipeline (which may contain only a single command). - PPPPIIDD The process ID of the shell's parent. This variable is read- + PPPPIIDD The process ID of the shell's parent. This variable is read- only. PPWWDD The current working directory as set by the ccdd command. RRAANNDDOOMM Each time this parameter is referenced, a random integer between 0 and 32767 is generated. The sequence of random numbers may be initialized by assigning a value to RRAANNDDOOMM. If RRAANNDDOOMM is unset, - it loses its special properties, even if it is subsequently + it loses its special properties, even if it is subsequently reset. RREEAADDLLIINNEE__LLIINNEE The contents of the rreeaaddlliinnee line buffer, for use with "bind -x" @@ -1017,197 +1024,202 @@ PPAARRAAMMEETTEERRSS RREEAADDLLIINNEE__PPOOIINNTT The position of the insertion point in the rreeaaddlliinnee line buffer, for use with "bind -x" (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below). - RREEPPLLYY Set to the line of input read by the rreeaadd builtin command when + RREEPPLLYY Set to the line of input read by the rreeaadd builtin command when no arguments are supplied. SSEECCOONNDDSS - Each time this parameter is referenced, the number of seconds - since shell invocation is returned. If a value is assigned to - SSEECCOONNDDSS, the value returned upon subsequent references is the - number of seconds since the assignment plus the value assigned. + Each time this parameter is referenced, the number of seconds + since shell invocation is returned. If a value is assigned to + SSEECCOONNDDSS, the value returned upon subsequent references is the + number of seconds since the assignment plus the value assigned. If SSEECCOONNDDSS is unset, it loses its special properties, even if it is subsequently reset. SSHHEELLLLOOPPTTSS - A colon-separated list of enabled shell options. Each word in - the list is a valid argument for the --oo option to the sseett + A colon-separated list of enabled shell options. Each word in + the list is a valid argument for the --oo option to the sseett builtin command (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below). The options - appearing in SSHHEELLLLOOPPTTSS are those reported as _o_n by sseett --oo. If - this variable is in the environment when bbaasshh starts up, each - shell option in the list will be enabled before reading any + appearing in SSHHEELLLLOOPPTTSS are those reported as _o_n by sseett --oo. If + this variable is in the environment when bbaasshh starts up, each + shell option in the list will be enabled before reading any startup files. This variable is read-only. SSHHLLVVLL Incremented by one each time an instance of bbaasshh is started. UUIIDD Expands to the user ID of the current user, initialized at shell startup. This variable is readonly. - The following variables are used by the shell. In some cases, bbaasshh + The following variables are used by the shell. In some cases, bbaasshh assigns a default value to a variable; these cases are noted below. BBAASSHH__CCOOMMPPAATT - The value is used to set the shell's compatibility level. See - the description of the sshhoopptt builtin below under SSHHEELLLL BBUUIILLTTIINN - CCOOMMMMAANNDDSS for a description of the various compatibility levels - and their effects. The value may be a decimal number (e.g., - 4.2) or an integer (e.g., 42) corresponding to the desired com- - patibility level. If BBAASSHH__CCOOMMPPAATT is unset or set to the empty - string, the compatibility level is set to the default for the - current version. If BBAASSHH__CCOOMMPPAATT is set to a value that is not + The value is used to set the shell's compatibility level. See + the description of the sshhoopptt builtin below under SSHHEELLLL BBUUIILLTTIINN + CCOOMMMMAANNDDSS for a description of the various compatibility levels + and their effects. The value may be a decimal number (e.g., + 4.2) or an integer (e.g., 42) corresponding to the desired com- + patibility level. If BBAASSHH__CCOOMMPPAATT is unset or set to the empty + string, the compatibility level is set to the default for the + current version. If BBAASSHH__CCOOMMPPAATT is set to a value that is not one of the valid compatibility levels, the shell prints an error - message and sets the compatibility level to the default for the - current version. The valid compatibility levels correspond to - the compatibility options accepted by the sshhoopptt builtin + message and sets the compatibility level to the default for the + current version. The valid compatibility levels correspond to + the compatibility options accepted by the sshhoopptt builtin described below (for example, ccoommppaatt4422 means that 4.2 and 42 are valid values). The current version is also a valid value. BBAASSHH__EENNVV - If this parameter is set when bbaasshh is executing a shell script, - its value is interpreted as a filename containing commands to + If this parameter is set when bbaasshh is executing a shell script, + its value is interpreted as a filename containing commands to initialize the shell, as in _~_/_._b_a_s_h_r_c. The value of BBAASSHH__EENNVV is - subjected to parameter expansion, command substitution, and - arithmetic expansion before being interpreted as a filename. + subjected to parameter expansion, command substitution, and + arithmetic expansion before being interpreted as a filename. PPAATTHH is not used to search for the resultant filename. BBAASSHH__XXTTRRAACCEEFFDD - If set to an integer corresponding to a valid file descriptor, - bbaasshh will write the trace output generated when _s_e_t _-_x is - enabled to that file descriptor. The file descriptor is closed - when BBAASSHH__XXTTRRAACCEEFFDD is unset or assigned a new value. Unsetting - BBAASSHH__XXTTRRAACCEEFFDD or assigning it the empty string causes the trace - output to be sent to the standard error. Note that setting + If set to an integer corresponding to a valid file descriptor, + bbaasshh will write the trace output generated when _s_e_t _-_x is + enabled to that file descriptor. The file descriptor is closed + when BBAASSHH__XXTTRRAACCEEFFDD is unset or assigned a new value. Unsetting + BBAASSHH__XXTTRRAACCEEFFDD or assigning it the empty string causes the trace + output to be sent to the standard error. Note that setting BBAASSHH__XXTTRRAACCEEFFDD to 2 (the standard error file descriptor) and then unsetting it will result in the standard error being closed. - CCDDPPAATTHH The search path for the ccdd command. This is a colon-separated - list of directories in which the shell looks for destination - directories specified by the ccdd command. A sample value is + CCDDPPAATTHH The search path for the ccdd command. This is a colon-separated + list of directories in which the shell looks for destination + directories specified by the ccdd command. A sample value is ".:~:/usr". CCHHIILLDD__MMAAXX - Set the number of exited child status values for the shell to - remember. Bash will not allow this value to be decreased below - a POSIX-mandated minimum, and there is a maximum value (cur- - rently 8192) that this may not exceed. The minimum value is + Set the number of exited child status values for the shell to + remember. Bash will not allow this value to be decreased below + a POSIX-mandated minimum, and there is a maximum value (cur- + rently 8192) that this may not exceed. The minimum value is system-dependent. CCOOLLUUMMNNSS - Used by the sseelleecctt compound command to determine the terminal - width when printing selection lists. Automatically set if the - cchheecckkwwiinnssiizzee option is enabled or in an interactive shell upon + Used by the sseelleecctt compound command to determine the terminal + width when printing selection lists. Automatically set if the + cchheecckkwwiinnssiizzee option is enabled or in an interactive shell upon receipt of a SSIIGGWWIINNCCHH. CCOOMMPPRREEPPLLYY An array variable from which bbaasshh reads the possible completions - generated by a shell function invoked by the programmable com- - pletion facility (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below). Each + generated by a shell function invoked by the programmable com- + pletion facility (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn below). Each array element contains one possible completion. - EEMMAACCSS If bbaasshh finds this variable in the environment when the shell - starts with value "t", it assumes that the shell is running in + EEMMAACCSS If bbaasshh finds this variable in the environment when the shell + starts with value "t", it assumes that the shell is running in an Emacs shell buffer and disables line editing. - EENNVV Similar to BBAASSHH__EENNVV; used when the shell is invoked in POSIX - mode. + EENNVV Similar to BBAASSHH__EENNVV; used when the shell is invoked in _p_o_s_i_x + _m_o_d_e. EEXXEECCIIGGNNOORREE - A colon-separated list of shell patterns (see PPaatttteerrnn MMaattcchhiinngg) - defining the list of filenames to be ignored by command search - using PPAATTHH. Files whose full pathnames match one of these pat- - terns are not considered executable files for the purposes of + A colon-separated list of shell patterns (see PPaatttteerrnn MMaattcchhiinngg) + defining the list of filenames to be ignored by command search + using PPAATTHH. Files whose full pathnames match one of these pat- + terns are not considered executable files for the purposes of completion and command execution via PPAATTHH lookup. This does not affect the behavior of the [[, tteesstt, and [[[[ commands. Full path- - names in the command hash table are not subject to EEXXEECCIIGGNNOORREE. - Use this variable to ignore shared library files that have the - executable bit set, but are not executable files. The pattern + names in the command hash table are not subject to EEXXEECCIIGGNNOORREE. + Use this variable to ignore shared library files that have the + executable bit set, but are not executable files. The pattern matching honors the setting of the eexxttgglloobb shell option. FFCCEEDDIITT The default editor for the ffcc builtin command. FFIIGGNNOORREE - A colon-separated list of suffixes to ignore when performing + A colon-separated list of suffixes to ignore when performing filename completion (see RREEAADDLLIINNEE below). A filename whose suf- - fix matches one of the entries in FFIIGGNNOORREE is excluded from the + fix matches one of the entries in FFIIGGNNOORREE is excluded from the list of matched filenames. A sample value is ".o:~". FFUUNNCCNNEESSTT - If set to a numeric value greater than 0, defines a maximum - function nesting level. Function invocations that exceed this + If set to a numeric value greater than 0, defines a maximum + function nesting level. Function invocations that exceed this nesting level will cause the current command to abort. GGLLOOBBIIGGNNOORREE - A colon-separated list of patterns defining the set of file - names to be ignored by pathname expansion. If a file name - matched by a pathname expansion pattern also matches one of the + A colon-separated list of patterns defining the set of file + names to be ignored by pathname expansion. If a file name + matched by a pathname expansion pattern also matches one of the patterns in GGLLOOBBIIGGNNOORREE, it is removed from the list of matches. HHIISSTTCCOONNTTRROOLL - A colon-separated list of values controlling how commands are - saved on the history list. If the list of values includes - _i_g_n_o_r_e_s_p_a_c_e, lines which begin with a ssppaaccee character are not - saved in the history list. A value of _i_g_n_o_r_e_d_u_p_s causes lines + A colon-separated list of values controlling how commands are + saved on the history list. If the list of values includes + _i_g_n_o_r_e_s_p_a_c_e, lines which begin with a ssppaaccee character are not + saved in the history list. A value of _i_g_n_o_r_e_d_u_p_s causes lines matching the previous history entry to not be saved. A value of _i_g_n_o_r_e_b_o_t_h is shorthand for _i_g_n_o_r_e_s_p_a_c_e and _i_g_n_o_r_e_d_u_p_s. A value of _e_r_a_s_e_d_u_p_s causes all previous lines matching the current line - to be removed from the history list before that line is saved. - Any value not in the above list is ignored. If HHIISSTTCCOONNTTRROOLL is - unset, or does not include a valid value, all lines read by the + to be removed from the history list before that line is saved. + Any value not in the above list is ignored. If HHIISSTTCCOONNTTRROOLL is + unset, or does not include a valid value, all lines read by the shell parser are saved on the history list, subject to the value - of HHIISSTTIIGGNNOORREE. The second and subsequent lines of a multi-line - compound command are not tested, and are added to the history + of HHIISSTTIIGGNNOORREE. The second and subsequent lines of a multi-line + compound command are not tested, and are added to the history regardless of the value of HHIISSTTCCOONNTTRROOLL. HHIISSTTFFIILLEE The name of the file in which command history is saved (see HHIISS-- - TTOORRYY below). The default value is _~_/_._b_a_s_h___h_i_s_t_o_r_y. If unset, + TTOORRYY below). The default value is _~_/_._b_a_s_h___h_i_s_t_o_r_y. If unset, the command history is not saved when a shell exits. HHIISSTTFFIILLEESSIIZZEE The maximum number of lines contained in the history file. When - this variable is assigned a value, the history file is trun- - cated, if necessary, to contain no more than that number of - lines by removing the oldest entries. The history file is also - truncated to this size after writing it when a shell exits. If - the value is 0, the history file is truncated to zero size. - Non-numeric values and numeric values less than zero inhibit - truncation. The shell sets the default value to the value of + this variable is assigned a value, the history file is trun- + cated, if necessary, to contain no more than that number of + lines by removing the oldest entries. The history file is also + truncated to this size after writing it when a shell exits. If + the value is 0, the history file is truncated to zero size. + Non-numeric values and numeric values less than zero inhibit + truncation. The shell sets the default value to the value of HHIISSTTSSIIZZEE after reading any startup files. HHIISSTTIIGGNNOORREE - A colon-separated list of patterns used to decide which command - lines should be saved on the history list. Each pattern is - anchored at the beginning of the line and must match the com- - plete line (no implicit `**' is appended). Each pattern is - tested against the line after the checks specified by HHIISSTTCCOONN-- - TTRROOLL are applied. In addition to the normal shell pattern + A colon-separated list of patterns used to decide which command + lines should be saved on the history list. Each pattern is + anchored at the beginning of the line and must match the com- + plete line (no implicit `**' is appended). Each pattern is + tested against the line after the checks specified by HHIISSTTCCOONN-- + TTRROOLL are applied. In addition to the normal shell pattern matching characters, `&&' matches the previous history line. `&&' - may be escaped using a backslash; the backslash is removed + may be escaped using a backslash; the backslash is removed before attempting a match. The second and subsequent lines of a multi-line compound command are not tested, and are added to the - history regardless of the value of HHIISSTTIIGGNNOORREE. The pattern + history regardless of the value of HHIISSTTIIGGNNOORREE. The pattern matching honors the setting of the eexxttgglloobb shell option. HHIISSTTSSIIZZEE - The number of commands to remember in the command history (see - HHIISSTTOORRYY below). If the value is 0, commands are not saved in + The number of commands to remember in the command history (see + HHIISSTTOORRYY below). If the value is 0, commands are not saved in the history list. Numeric values less than zero result in every - command being saved on the history list (there is no limit). - The shell sets the default value to 500 after reading any + command being saved on the history list (there is no limit). + The shell sets the default value to 500 after reading any startup files. HHIISSTTTTIIMMEEFFOORRMMAATT - If this variable is set and not null, its value is used as a + If this variable is set and not null, its value is used as a format string for _s_t_r_f_t_i_m_e(3) to print the time stamp associated - with each history entry displayed by the hhiissttoorryy builtin. If - this variable is set, time stamps are written to the history - file so they may be preserved across shell sessions. This uses - the history comment character to distinguish timestamps from + with each history entry displayed by the hhiissttoorryy builtin. If + this variable is set, time stamps are written to the history + file so they may be preserved across shell sessions. This uses + the history comment character to distinguish timestamps from other history lines. HHOOMMEE The home directory of the current user; the default argument for the ccdd builtin command. The value of this variable is also used when performing tilde expansion. HHOOSSTTFFIILLEE - Contains the name of a file in the same format as _/_e_t_c_/_h_o_s_t_s + Contains the name of a file in the same format as _/_e_t_c_/_h_o_s_t_s that should be read when the shell needs to complete a hostname. - The list of possible hostname completions may be changed while - the shell is running; the next time hostname completion is - attempted after the value is changed, bbaasshh adds the contents of - the new file to the existing list. If HHOOSSTTFFIILLEE is set, but has - no value, or does not name a readable file, bbaasshh attempts to - read _/_e_t_c_/_h_o_s_t_s to obtain the list of possible hostname comple- + The list of possible hostname completions may be changed while + the shell is running; the next time hostname completion is + attempted after the value is changed, bbaasshh adds the contents of + the new file to the existing list. If HHOOSSTTFFIILLEE is set, but has + no value, or does not name a readable file, bbaasshh attempts to + read _/_e_t_c_/_h_o_s_t_s to obtain the list of possible hostname comple- tions. When HHOOSSTTFFIILLEE is unset, the hostname list is cleared. - IIFFSS The _I_n_t_e_r_n_a_l _F_i_e_l_d _S_e_p_a_r_a_t_o_r that is used for word splitting - after expansion and to split lines into words with the rreeaadd + IIFFSS The _I_n_t_e_r_n_a_l _F_i_e_l_d _S_e_p_a_r_a_t_o_r that is used for word splitting + after expansion and to split lines into words with the rreeaadd builtin command. The default value is ``<space><tab><new- line>''. IIGGNNOORREEEEOOFF Controls the action of an interactive shell on receipt of an EEOOFF character as the sole input. If set, the value is the number of - consecutive EEOOFF characters which must be typed as the first - characters on an input line before bbaasshh exits. If the variable - exists but does not have a numeric value, or has no value, the - default value is 10. If it does not exist, EEOOFF signifies the + consecutive EEOOFF characters which must be typed as the first + characters on an input line before bbaasshh exits. If the variable + exists but does not have a numeric value, or has no value, the + default value is 10. If it does not exist, EEOOFF signifies the end of input to the shell. IINNPPUUTTRRCC - The filename for the rreeaaddlliinnee startup file, overriding the + The filename for the rreeaaddlliinnee startup file, overriding the default of _~_/_._i_n_p_u_t_r_c (see RREEAADDLLIINNEE below). + IINNSSIIDDEE__EEMMAACCSS + If this variable appears in the environment when the shell + starts, bbaasshh assumes that it is running inside an Emacs shell + buffer and may disable line editing, depending on the value of + TTEERRMM. LLAANNGG Used to determine the locale category for any category not specifically selected with a variable starting with LLCC__. LLCC__AALLLL This variable overrides the value of LLAANNGG and any other LLCC__ @@ -1273,39 +1285,40 @@ PPAARRAAMMEETTEERRSS shell enters _p_o_s_i_x _m_o_d_e before reading the startup files, as if the ----ppoossiixx invocation option had been supplied. If it is set while the shell is running, bbaasshh enables _p_o_s_i_x _m_o_d_e, as if the - command _s_e_t _-_o _p_o_s_i_x had been executed. + command _s_e_t _-_o _p_o_s_i_x had been executed. When the shell enters + _p_o_s_i_x _m_o_d_e, it sets this variable if it was not already set. PPRROOMMPPTT__CCOOMMMMAANNDD If set, the value is executed as a command prior to issuing each primary prompt. PPRROOMMPPTT__DDIIRRTTRRIIMM - If set to a number greater than zero, the value is used as the + If set to a number greater than zero, the value is used as the number of trailing directory components to retain when expanding - the \\ww and \\WW prompt string escapes (see PPRROOMMPPTTIINNGG below). + the \\ww and \\WW prompt string escapes (see PPRROOMMPPTTIINNGG below). Characters removed are replaced with an ellipsis. - PPSS00 The value of this parameter is expanded (see PPRROOMMPPTTIINNGG below) - and displayed by interactive shells after reading a command and + PPSS00 The value of this parameter is expanded (see PPRROOMMPPTTIINNGG below) + and displayed by interactive shells after reading a command and before the command is executed. - PPSS11 The value of this parameter is expanded (see PPRROOMMPPTTIINNGG below) - and used as the primary prompt string. The default value is + PPSS11 The value of this parameter is expanded (see PPRROOMMPPTTIINNGG below) + and used as the primary prompt string. The default value is ``\\ss--\\vv\\$$ ''. - PPSS22 The value of this parameter is expanded as with PPSS11 and used as + PPSS22 The value of this parameter is expanded as with PPSS11 and used as the secondary prompt string. The default is ``>> ''. PPSS33 The value of this parameter is used as the prompt for the sseelleecctt command (see SSHHEELLLL GGRRAAMMMMAARR above). - PPSS44 The value of this parameter is expanded as with PPSS11 and the - value is printed before each command bbaasshh displays during an - execution trace. The first character of the expanded value of + PPSS44 The value of this parameter is expanded as with PPSS11 and the + value is printed before each command bbaasshh displays during an + execution trace. The first character of the expanded value of PPSS44 is replicated multiple times, as necessary, to indicate mul- tiple levels of indirection. The default is ``++ ''. SSHHEELLLL The full pathname to the shell is kept in this environment vari- - able. If it is not set when the shell starts, bbaasshh assigns to + able. If it is not set when the shell starts, bbaasshh assigns to it the full pathname of the current user's login shell. TTIIMMEEFFOORRMMAATT - The value of this parameter is used as a format string specify- - ing how the timing information for pipelines prefixed with the - ttiimmee reserved word should be displayed. The %% character intro- - duces an escape sequence that is expanded to a time value or - other information. The escape sequences and their meanings are + The value of this parameter is used as a format string specify- + ing how the timing information for pipelines prefixed with the + ttiimmee reserved word should be displayed. The %% character intro- + duces an escape sequence that is expanded to a time value or + other information. The escape sequences and their meanings are as follows; the braces denote optional portions. %%%% A literal %%. %%[[_p]][[ll]]RR The elapsed time in seconds. @@ -1313,77 +1326,77 @@ PPAARRAAMMEETTEERRSS %%[[_p]][[ll]]SS The number of CPU seconds spent in system mode. %%PP The CPU percentage, computed as (%U + %S) / %R. - The optional _p is a digit specifying the _p_r_e_c_i_s_i_o_n, the number + The optional _p is a digit specifying the _p_r_e_c_i_s_i_o_n, the number of fractional digits after a decimal point. A value of 0 causes no decimal point or fraction to be output. At most three places - after the decimal point may be specified; values of _p greater - than 3 are changed to 3. If _p is not specified, the value 3 is + after the decimal point may be specified; values of _p greater + than 3 are changed to 3. If _p is not specified, the value 3 is used. - The optional ll specifies a longer format, including minutes, of - the form _M_Mm_S_S._F_Fs. The value of _p determines whether or not + The optional ll specifies a longer format, including minutes, of + the form _M_Mm_S_S._F_Fs. The value of _p determines whether or not the fraction is included. - If this variable is not set, bbaasshh acts as if it had the value - $$''\\nnrreeaall\\tt%%33llRR\\nnuusseerr\\tt%%33llUU\\nnssyyss\\tt%%33llSS''. If the value is null, + If this variable is not set, bbaasshh acts as if it had the value + $$''\\nnrreeaall\\tt%%33llRR\\nnuusseerr\\tt%%33llUU\\nnssyyss\\tt%%33llSS''. If the value is null, no timing information is displayed. A trailing newline is added when the format string is displayed. - TTMMOOUUTT If set to a value greater than zero, TTMMOOUUTT is treated as the + TTMMOOUUTT If set to a value greater than zero, TTMMOOUUTT is treated as the default timeout for the rreeaadd builtin. The sseelleecctt command termi- nates if input does not arrive after TTMMOOUUTT seconds when input is - coming from a terminal. In an interactive shell, the value is + coming from a terminal. In an interactive shell, the value is interpreted as the number of seconds to wait for a line of input after issuing the primary prompt. BBaasshh terminates after waiting - for that number of seconds if a complete line of input does not + for that number of seconds if a complete line of input does not arrive. - TTMMPPDDIIRR If set, bbaasshh uses its value as the name of a directory in which + TTMMPPDDIIRR If set, bbaasshh uses its value as the name of a directory in which bbaasshh creates temporary files for the shell's use. aauuttoo__rreessuummee This variable controls how the shell interacts with the user and - job control. If this variable is set, single word simple com- + job control. If this variable is set, single word simple com- mands without redirections are treated as candidates for resump- tion of an existing stopped job. There is no ambiguity allowed; - if there is more than one job beginning with the string typed, - the job most recently accessed is selected. The _n_a_m_e of a - stopped job, in this context, is the command line used to start - it. If set to the value _e_x_a_c_t, the string supplied must match - the name of a stopped job exactly; if set to _s_u_b_s_t_r_i_n_g, the - string supplied needs to match a substring of the name of a - stopped job. The _s_u_b_s_t_r_i_n_g value provides functionality analo- - gous to the %%?? job identifier (see JJOOBB CCOONNTTRROOLL below). If set - to any other value, the supplied string must be a prefix of a + if there is more than one job beginning with the string typed, + the job most recently accessed is selected. The _n_a_m_e of a + stopped job, in this context, is the command line used to start + it. If set to the value _e_x_a_c_t, the string supplied must match + the name of a stopped job exactly; if set to _s_u_b_s_t_r_i_n_g, the + string supplied needs to match a substring of the name of a + stopped job. The _s_u_b_s_t_r_i_n_g value provides functionality analo- + gous to the %%?? job identifier (see JJOOBB CCOONNTTRROOLL below). If set + to any other value, the supplied string must be a prefix of a stopped job's name; this provides functionality analogous to the %%_s_t_r_i_n_g job identifier. hhiissttcchhaarrss - The two or three characters which control history expansion and + The two or three characters which control history expansion and tokenization (see HHIISSTTOORRYY EEXXPPAANNSSIIOONN below). The first character - is the _h_i_s_t_o_r_y _e_x_p_a_n_s_i_o_n character, the character which signals - the start of a history expansion, normally `!!'. The second - character is the _q_u_i_c_k _s_u_b_s_t_i_t_u_t_i_o_n character, which is used as - shorthand for re-running the previous command entered, substi- - tuting one string for another in the command. The default is - `^^'. The optional third character is the character which indi- - cates that the remainder of the line is a comment when found as - the first character of a word, normally `##'. The history com- + is the _h_i_s_t_o_r_y _e_x_p_a_n_s_i_o_n character, the character which signals + the start of a history expansion, normally `!!'. The second + character is the _q_u_i_c_k _s_u_b_s_t_i_t_u_t_i_o_n character, which is used as + shorthand for re-running the previous command entered, substi- + tuting one string for another in the command. The default is + `^^'. The optional third character is the character which indi- + cates that the remainder of the line is a comment when found as + the first character of a word, normally `##'. The history com- ment character causes history substitution to be skipped for the - remaining words on the line. It does not necessarily cause the + remaining words on the line. It does not necessarily cause the shell parser to treat the rest of the line as a comment. AArrrraayyss - BBaasshh provides one-dimensional indexed and associative array variables. - Any variable may be used as an indexed array; the ddeeccllaarree builtin will - explicitly declare an array. There is no maximum limit on the size of - an array, nor any requirement that members be indexed or assigned con- - tiguously. Indexed arrays are referenced using integers (including + BBaasshh provides one-dimensional indexed and associative array variables. + Any variable may be used as an indexed array; the ddeeccllaarree builtin will + explicitly declare an array. There is no maximum limit on the size of + an array, nor any requirement that members be indexed or assigned con- + tiguously. Indexed arrays are referenced using integers (including arithmetic expressions) and are zero-based; associative arrays are ref- erenced using arbitrary strings. Unless otherwise noted, indexed array indices must be non-negative integers. - An indexed array is created automatically if any variable is assigned + An indexed array is created automatically if any variable is assigned to using the syntax _n_a_m_e[_s_u_b_s_c_r_i_p_t]=_v_a_l_u_e. The _s_u_b_s_c_r_i_p_t is treated as an arithmetic expression that must evaluate to a number. To explicitly - declare an indexed array, use ddeeccllaarree --aa _n_a_m_e (see SSHHEELLLL BBUUIILLTTIINN CCOOMM-- - MMAANNDDSS below). ddeeccllaarree --aa _n_a_m_e[[_s_u_b_s_c_r_i_p_t]] is also accepted; the _s_u_b_- + declare an indexed array, use ddeeccllaarree --aa _n_a_m_e (see SSHHEELLLL BBUUIILLTTIINN CCOOMM-- + MMAANNDDSS below). ddeeccllaarree --aa _n_a_m_e[[_s_u_b_s_c_r_i_p_t]] is also accepted; the _s_u_b_- _s_c_r_i_p_t is ignored. Associative arrays are created using ddeeccllaarree --AA _n_a_m_e. @@ -1391,141 +1404,141 @@ PPAARRAAMMEETTEERRSS Attributes may be specified for an array variable using the ddeeccllaarree and rreeaaddoonnllyy builtins. Each attribute applies to all members of an array. - Arrays are assigned to using compound assignments of the form - _n_a_m_e=((value_1 ... value_n)), where each _v_a_l_u_e is of the form [_s_u_b_- - _s_c_r_i_p_t]=_s_t_r_i_n_g. Indexed array assignments do not require anything but + Arrays are assigned to using compound assignments of the form + _n_a_m_e=((value_1 ... value_n)), where each _v_a_l_u_e is of the form [_s_u_b_- + _s_c_r_i_p_t]=_s_t_r_i_n_g. Indexed array assignments do not require anything but _s_t_r_i_n_g. When assigning to indexed arrays, if the optional brackets and - subscript are supplied, that index is assigned to; otherwise the index - of the element assigned is the last index assigned to by the statement + subscript are supplied, that index is assigned to; otherwise the index + of the element assigned is the last index assigned to by the statement plus one. Indexing starts at zero. When assigning to an associative array, the subscript is required. - This syntax is also accepted by the ddeeccllaarree builtin. Individual array - elements may be assigned to using the _n_a_m_e[_s_u_b_s_c_r_i_p_t]=_v_a_l_u_e syntax - introduced above. When assigning to an indexed array, if _n_a_m_e is sub- - scripted by a negative number, that number is interpreted as relative - to one greater than the maximum index of _n_a_m_e, so negative indices + This syntax is also accepted by the ddeeccllaarree builtin. Individual array + elements may be assigned to using the _n_a_m_e[_s_u_b_s_c_r_i_p_t]=_v_a_l_u_e syntax + introduced above. When assigning to an indexed array, if _n_a_m_e is sub- + scripted by a negative number, that number is interpreted as relative + to one greater than the maximum index of _n_a_m_e, so negative indices count back from the end of the array, and an index of -1 references the last element. - Any element of an array may be referenced using ${_n_a_m_e[_s_u_b_s_c_r_i_p_t]}. + Any element of an array may be referenced using ${_n_a_m_e[_s_u_b_s_c_r_i_p_t]}. The braces are required to avoid conflicts with pathname expansion. If - _s_u_b_s_c_r_i_p_t is @@ or **, the word expands to all members of _n_a_m_e. These - subscripts differ only when the word appears within double quotes. If + _s_u_b_s_c_r_i_p_t is @@ or **, the word expands to all members of _n_a_m_e. These + subscripts differ only when the word appears within double quotes. If the word is double-quoted, ${_n_a_m_e[*]} expands to a single word with the - value of each array member separated by the first character of the IIFFSS + value of each array member separated by the first character of the IIFFSS special variable, and ${_n_a_m_e[@]} expands each element of _n_a_m_e to a sep- - arate word. When there are no array members, ${_n_a_m_e[@]} expands to - nothing. If the double-quoted expansion occurs within a word, the - expansion of the first parameter is joined with the beginning part of - the original word, and the expansion of the last parameter is joined - with the last part of the original word. This is analogous to the - expansion of the special parameters ** and @@ (see SSppeecciiaall PPaarraammeetteerrss - above). ${#_n_a_m_e[_s_u_b_s_c_r_i_p_t]} expands to the length of ${_n_a_m_e[_s_u_b_- - _s_c_r_i_p_t]}. If _s_u_b_s_c_r_i_p_t is ** or @@, the expansion is the number of ele- - ments in the array. If the _s_u_b_s_c_r_i_p_t used to reference an element of - an indexed array evaluates to a number less than zero, it is inter- - preted as relative to one greater than the maximum index of the array, - so negative indices count back from the end of the array, and an index + arate word. When there are no array members, ${_n_a_m_e[@]} expands to + nothing. If the double-quoted expansion occurs within a word, the + expansion of the first parameter is joined with the beginning part of + the original word, and the expansion of the last parameter is joined + with the last part of the original word. This is analogous to the + expansion of the special parameters ** and @@ (see SSppeecciiaall PPaarraammeetteerrss + above). ${#_n_a_m_e[_s_u_b_s_c_r_i_p_t]} expands to the length of ${_n_a_m_e[_s_u_b_- + _s_c_r_i_p_t]}. If _s_u_b_s_c_r_i_p_t is ** or @@, the expansion is the number of ele- + ments in the array. If the _s_u_b_s_c_r_i_p_t used to reference an element of + an indexed array evaluates to a number less than zero, it is inter- + preted as relative to one greater than the maximum index of the array, + so negative indices count back from the end of the array, and an index of -1 references the last element. Referencing an array variable without a subscript is equivalent to ref- - erencing the array with a subscript of 0. Any reference to a variable + erencing the array with a subscript of 0. Any reference to a variable using a valid subscript is legal, and bbaasshh will create an array if nec- essary. - An array variable is considered set if a subscript has been assigned a + An array variable is considered set if a subscript has been assigned a value. The null string is a valid value. - It is possible to obtain the keys (indices) of an array as well as the - values. ${!!_n_a_m_e[_@]} and ${!!_n_a_m_e[_*]} expand to the indices assigned in + It is possible to obtain the keys (indices) of an array as well as the + values. ${!!_n_a_m_e[_@]} and ${!!_n_a_m_e[_*]} expand to the indices assigned in array variable _n_a_m_e. The treatment when in double quotes is similar to the expansion of the special parameters _@ and _* within double quotes. - The uunnsseett builtin is used to destroy arrays. uunnsseett _n_a_m_e[_s_u_b_s_c_r_i_p_t] - destroys the array element at index _s_u_b_s_c_r_i_p_t, for both indexed and - associative arrays. Negative subscripts to indexed arrays are inter- - preted as described above. Unsetting the last element of an array - variable does not unset the variable. uunnsseett _n_a_m_e, where _n_a_m_e is an + The uunnsseett builtin is used to destroy arrays. uunnsseett _n_a_m_e[_s_u_b_s_c_r_i_p_t] + destroys the array element at index _s_u_b_s_c_r_i_p_t, for both indexed and + associative arrays. Negative subscripts to indexed arrays are inter- + preted as described above. Unsetting the last element of an array + variable does not unset the variable. uunnsseett _n_a_m_e, where _n_a_m_e is an array, or uunnsseett _n_a_m_e[_s_u_b_s_c_r_i_p_t], where _s_u_b_s_c_r_i_p_t is ** or @@, removes the entire array. - When using a variable name with a subscript as an argument to a com- - mand, such as with uunnsseett, without using the word expansion syntax - described above, the argument is subject to pathname expansion. If + When using a variable name with a subscript as an argument to a com- + mand, such as with uunnsseett, without using the word expansion syntax + described above, the argument is subject to pathname expansion. If pathname expansion is not desired, the argument should be quoted. - The ddeeccllaarree, llooccaall, and rreeaaddoonnllyy builtins each accept a --aa option to - specify an indexed array and a --AA option to specify an associative - array. If both options are supplied, --AA takes precedence. The rreeaadd - builtin accepts a --aa option to assign a list of words read from the + The ddeeccllaarree, llooccaall, and rreeaaddoonnllyy builtins each accept a --aa option to + specify an indexed array and a --AA option to specify an associative + array. If both options are supplied, --AA takes precedence. The rreeaadd + builtin accepts a --aa option to assign a list of words read from the standard input to an array. The sseett and ddeeccllaarree builtins display array values in a way that allows them to be reused as assignments. EEXXPPAANNSSIIOONN Expansion is performed on the command line after it has been split into - words. There are seven kinds of expansion performed: _b_r_a_c_e _e_x_p_a_n_s_i_o_n, - _t_i_l_d_e _e_x_p_a_n_s_i_o_n, _p_a_r_a_m_e_t_e_r _a_n_d _v_a_r_i_a_b_l_e _e_x_p_a_n_s_i_o_n, _c_o_m_m_a_n_d _s_u_b_s_t_i_t_u_- + words. There are seven kinds of expansion performed: _b_r_a_c_e _e_x_p_a_n_s_i_o_n, + _t_i_l_d_e _e_x_p_a_n_s_i_o_n, _p_a_r_a_m_e_t_e_r _a_n_d _v_a_r_i_a_b_l_e _e_x_p_a_n_s_i_o_n, _c_o_m_m_a_n_d _s_u_b_s_t_i_t_u_- _t_i_o_n, _a_r_i_t_h_m_e_t_i_c _e_x_p_a_n_s_i_o_n, _w_o_r_d _s_p_l_i_t_t_i_n_g, and _p_a_t_h_n_a_m_e _e_x_p_a_n_s_i_o_n. The order of expansions is: brace expansion; tilde expansion, parameter - and variable expansion, arithmetic expansion, and command substitution - (done in a left-to-right fashion); word splitting; and pathname expan- + and variable expansion, arithmetic expansion, and command substitution + (done in a left-to-right fashion); word splitting; and pathname expan- sion. On systems that can support it, there is an additional expansion avail- - able: _p_r_o_c_e_s_s _s_u_b_s_t_i_t_u_t_i_o_n. This is performed at the same time as - tilde, parameter, variable, and arithmetic expansion and command sub- + able: _p_r_o_c_e_s_s _s_u_b_s_t_i_t_u_t_i_o_n. This is performed at the same time as + tilde, parameter, variable, and arithmetic expansion and command sub- stitution. - After these expansions are performed, quote characters present in the - original word are removed unless they have been quoted themselves + After these expansions are performed, quote characters present in the + original word are removed unless they have been quoted themselves (_q_u_o_t_e _r_e_m_o_v_a_l). - Only brace expansion, word splitting, and pathname expansion can - increase the number of words of the expansion; other expansions expand - a single word to a single word. The only exceptions to this are the - expansions of "$$@@" and "$${{_n_a_m_e[[@@]]}}", and, in most cases, $$** and + Only brace expansion, word splitting, and pathname expansion can + increase the number of words of the expansion; other expansions expand + a single word to a single word. The only exceptions to this are the + expansions of "$$@@" and "$${{_n_a_m_e[[@@]]}}", and, in most cases, $$** and $${{_n_a_m_e[[**]]}} as explained above (see PPAARRAAMMEETTEERRSS). BBrraaccee EExxppaannssiioonn _B_r_a_c_e _e_x_p_a_n_s_i_o_n is a mechanism by which arbitrary strings may be gener- - ated. This mechanism is similar to _p_a_t_h_n_a_m_e _e_x_p_a_n_s_i_o_n, but the file- + ated. This mechanism is similar to _p_a_t_h_n_a_m_e _e_x_p_a_n_s_i_o_n, but the file- names generated need not exist. Patterns to be brace expanded take the form of an optional _p_r_e_a_m_b_l_e, followed by either a series of comma-sep- - arated strings or a sequence expression between a pair of braces, fol- - lowed by an optional _p_o_s_t_s_c_r_i_p_t. The preamble is prefixed to each + arated strings or a sequence expression between a pair of braces, fol- + lowed by an optional _p_o_s_t_s_c_r_i_p_t. The preamble is prefixed to each string contained within the braces, and the postscript is then appended to each resulting string, expanding left to right. - Brace expansions may be nested. The results of each expanded string - are not sorted; left to right order is preserved. For example, + Brace expansions may be nested. The results of each expanded string + are not sorted; left to right order is preserved. For example, a{{d,c,b}}e expands into `ade ace abe'. - A sequence expression takes the form {{_x...._y[[...._i_n_c_r]]}}, where _x and _y are - either integers or single characters, and _i_n_c_r, an optional increment, - is an integer. When integers are supplied, the expression expands to - each number between _x and _y, inclusive. Supplied integers may be pre- - fixed with _0 to force each term to have the same width. When either _x - or _y begins with a zero, the shell attempts to force all generated - terms to contain the same number of digits, zero-padding where neces- - sary. When characters are supplied, the expression expands to each - character lexicographically between _x and _y, inclusive, using the - default C locale. Note that both _x and _y must be of the same type. - When the increment is supplied, it is used as the difference between + A sequence expression takes the form {{_x...._y[[...._i_n_c_r]]}}, where _x and _y are + either integers or single characters, and _i_n_c_r, an optional increment, + is an integer. When integers are supplied, the expression expands to + each number between _x and _y, inclusive. Supplied integers may be pre- + fixed with _0 to force each term to have the same width. When either _x + or _y begins with a zero, the shell attempts to force all generated + terms to contain the same number of digits, zero-padding where neces- + sary. When characters are supplied, the expression expands to each + character lexicographically between _x and _y, inclusive, using the + default C locale. Note that both _x and _y must be of the same type. + When the increment is supplied, it is used as the difference between each term. The default increment is 1 or -1 as appropriate. Brace expansion is performed before any other expansions, and any char- - acters special to other expansions are preserved in the result. It is - strictly textual. BBaasshh does not apply any syntactic interpretation to + acters special to other expansions are preserved in the result. It is + strictly textual. BBaasshh does not apply any syntactic interpretation to the context of the expansion or the text between the braces. - A correctly-formed brace expansion must contain unquoted opening and - closing braces, and at least one unquoted comma or a valid sequence - expression. Any incorrectly formed brace expansion is left unchanged. + A correctly-formed brace expansion must contain unquoted opening and + closing braces, and at least one unquoted comma or a valid sequence + expression. Any incorrectly formed brace expansion is left unchanged. A {{ or ,, may be quoted with a backslash to prevent its being considered - part of a brace expression. To avoid conflicts with parameter expan- + part of a brace expression. To avoid conflicts with parameter expan- sion, the string $${{ is not considered eligible for brace expansion, and inhibits brace expansion until the closing }}. @@ -1536,36 +1549,36 @@ EEXXPPAANNSSIIOONN or chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}} - Brace expansion introduces a slight incompatibility with historical - versions of sshh. sshh does not treat opening or closing braces specially - when they appear as part of a word, and preserves them in the output. - BBaasshh removes braces from words as a consequence of brace expansion. - For example, a word entered to sshh as _f_i_l_e_{_1_,_2_} appears identically in - the output. The same word is output as _f_i_l_e_1 _f_i_l_e_2 after expansion by - bbaasshh. If strict compatibility with sshh is desired, start bbaasshh with the + Brace expansion introduces a slight incompatibility with historical + versions of sshh. sshh does not treat opening or closing braces specially + when they appear as part of a word, and preserves them in the output. + BBaasshh removes braces from words as a consequence of brace expansion. + For example, a word entered to sshh as _f_i_l_e_{_1_,_2_} appears identically in + the output. The same word is output as _f_i_l_e_1 _f_i_l_e_2 after expansion by + bbaasshh. If strict compatibility with sshh is desired, start bbaasshh with the ++BB option or disable brace expansion with the ++BB option to the sseett com- mand (see SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS below). TTiillddee EExxppaannssiioonn - If a word begins with an unquoted tilde character (`~~'), all of the - characters preceding the first unquoted slash (or all characters, if - there is no unquoted slash) are considered a _t_i_l_d_e_-_p_r_e_f_i_x. If none of - the characters in the tilde-prefix are quoted, the characters in the - tilde-prefix following the tilde are treated as a possible _l_o_g_i_n _n_a_m_e. - If this login name is the null string, the tilde is replaced with the - value of the shell parameter HHOOMMEE. If HHOOMMEE is unset, the home direc- - tory of the user executing the shell is substituted instead. Other- - wise, the tilde-prefix is replaced with the home directory associated + If a word begins with an unquoted tilde character (`~~'), all of the + characters preceding the first unquoted slash (or all characters, if + there is no unquoted slash) are considered a _t_i_l_d_e_-_p_r_e_f_i_x. If none of + the characters in the tilde-prefix are quoted, the characters in the + tilde-prefix following the tilde are treated as a possible _l_o_g_i_n _n_a_m_e. + If this login name is the null string, the tilde is replaced with the + value of the shell parameter HHOOMMEE. If HHOOMMEE is unset, the home direc- + tory of the user executing the shell is substituted instead. Other- + wise, the tilde-prefix is replaced with the home directory associated with the specified login name. - If the tilde-prefix is a `~+', the value of the shell variable PPWWDD + If the tilde-prefix is a `~+', the value of the shell variable PPWWDD replaces the tilde-prefix. If the tilde-prefix is a `~-', the value of - the shell variable OOLLDDPPWWDD, if it is set, is substituted. If the char- - acters following the tilde in the tilde-prefix consist of a number _N, - optionally prefixed by a `+' or a `-', the tilde-prefix is replaced + the shell variable OOLLDDPPWWDD, if it is set, is substituted. If the char- + acters following the tilde in the tilde-prefix consist of a number _N, + optionally prefixed by a `+' or a `-', the tilde-prefix is replaced with the corresponding element from the directory stack, as it would be displayed by the ddiirrss builtin invoked with the tilde-prefix as an argu- - ment. If the characters following the tilde in the tilde-prefix con- + ment. If the characters following the tilde in the tilde-prefix con- sist of a number without a leading `+' or `-', `+' is assumed. If the login name is invalid, or the tilde expansion fails, the word is @@ -1573,10 +1586,15 @@ EEXXPPAANNSSIIOONN Each variable assignment is checked for unquoted tilde-prefixes immedi- ately following a :: or the first ==. In these cases, tilde expansion is - also performed. Consequently, one may use filenames with tildes in - assignments to PPAATTHH, MMAAIILLPPAATTHH, and CCDDPPAATTHH, and the shell assigns the + also performed. Consequently, one may use filenames with tildes in + assignments to PPAATTHH, MMAAIILLPPAATTHH, and CCDDPPAATTHH, and the shell assigns the expanded value. + Bash also performs tilde expansion on words satisfying the conditions + of variable assignments (as described above under PPAARRAAMMEETTEERRSS) when they + appear as arguments to simple commands. Bash does not do this, except + for the _d_e_c_l_a_r_a_t_i_o_n commands listed above, when in _p_o_s_i_x _m_o_d_e. + PPaarraammeetteerr EExxppaannssiioonn The `$$' character introduces parameter expansion, command substitution, or arithmetic expansion. The parameter name or symbol to be expanded @@ -1598,18 +1616,18 @@ EEXXPPAANNSSIIOONN (AArrrraayyss). If the first character of _p_a_r_a_m_e_t_e_r is an exclamation point (!!), and - _p_a_r_a_m_e_t_e_r is not a _n_a_m_e_r_e_f, it introduces a level of variable indirec- - tion. BBaasshh uses the value of the variable formed from the rest of - _p_a_r_a_m_e_t_e_r as the name of the variable; this variable is then expanded - and that value is used in the rest of the substitution, rather than the - value of _p_a_r_a_m_e_t_e_r itself. This is known as _i_n_d_i_r_e_c_t _e_x_p_a_n_s_i_o_n. The - value is subject to tilde expansion, parameter expansion, command sub- - stitution, and arithmetic expansion. If _p_a_r_a_m_e_t_e_r is a nameref, this - expands to the name of the variable referenced by _p_a_r_a_m_e_t_e_r instead of - performing the complete indirect expansion. The exceptions to this are - the expansions of ${!!_p_r_e_f_i_x**} and ${!!_n_a_m_e[_@]} described below. The - exclamation point must immediately follow the left brace in order to - introduce indirection. + _p_a_r_a_m_e_t_e_r is not a _n_a_m_e_r_e_f, it introduces a level of indirection. BBaasshh + uses the value formed by expanding the rest of _p_a_r_a_m_e_t_e_r as the new + _p_a_r_a_m_e_t_e_r; this is then expanded and that value is used in the rest of + the expansion, rather than the expansion of the original _p_a_r_a_m_e_t_e_r. + This is known as _i_n_d_i_r_e_c_t _e_x_p_a_n_s_i_o_n. The value is subject to tilde + expansion, parameter expansion, command substitution, and arithmetic + expansion. If _p_a_r_a_m_e_t_e_r is a nameref, this expands to the name of the + parameter referenced by _p_a_r_a_m_e_t_e_r instead of performing the complete + indirect expansion. The exceptions to this are the expansions of + ${!!_p_r_e_f_i_x**} and ${!!_n_a_m_e[_@]} described below. The exclamation point + must immediately follow the left brace in order to introduce indirec- + tion. In each of the cases below, _w_o_r_d is subject to tilde expansion, parame- ter expansion, command substitution, and arithmetic expansion. @@ -2701,7 +2719,7 @@ CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENN ronment cannot affect the shell's execution environment. Subshells spawned to execute command substitutions inherit the value of - the --ee option from the parent shell. When not in _p_o_s_i_x mode, bbaasshh + the --ee option from the parent shell. When not in _p_o_s_i_x _m_o_d_e, bbaasshh clears the --ee option in such subshells. If a command is followed by a && and job control is not active, the @@ -4379,71 +4397,78 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS The return value is true unless an invalid option is supplied, or no matches were generated. - ccoommpplleettee [--aabbccddeeffggjjkkssuuvv] [--oo _c_o_m_p_-_o_p_t_i_o_n] [--DDEE] [--AA _a_c_t_i_o_n] [--GG _g_l_o_b_- + ccoommpplleettee [--aabbccddeeffggjjkkssuuvv] [--oo _c_o_m_p_-_o_p_t_i_o_n] [--DDEEII] [--AA _a_c_t_i_o_n] [--GG _g_l_o_b_- _p_a_t] [--WW _w_o_r_d_l_i_s_t] [--FF _f_u_n_c_t_i_o_n] [--CC _c_o_m_m_a_n_d] [--XX _f_i_l_t_e_r_p_a_t] [--PP _p_r_e_f_i_x] [--SS _s_u_f_f_i_x] _n_a_m_e [_n_a_m_e _._._.] - ccoommpplleettee --pprr [--DDEE] [_n_a_m_e ...] + ccoommpplleettee --pprr [--DDEEII] [_n_a_m_e ...] Specify how arguments to each _n_a_m_e should be completed. If the --pp option is supplied, or if no options are supplied, existing completion specifications are printed in a way that allows them to be reused as input. The --rr option removes a completion spec- ification for each _n_a_m_e, or, if no _n_a_m_es are supplied, all com- - pletion specifications. The --DD option indicates that the - remaining options and actions should apply to the ``default'' - command completion; that is, completion attempted on a command - for which no completion has previously been defined. The --EE - option indicates that the remaining options and actions should - apply to ``empty'' command completion; that is, completion - attempted on a blank line. - - The process of applying these completion specifications when - word completion is attempted is described above under PPrrooggrraamm-- + pletion specifications. The --DD option indicates that other sup- + plied options and actions should apply to the ``default'' com- + mand completion; that is, completion attempted on a command for + which no completion has previously been defined. The --EE option + indicates that other supplied options and actions should apply + to ``empty'' command completion; that is, completion attempted + on a blank line. The --II option indicates that other supplied + options and actions should apply to completion on the inital + non-assignment word on the line, or after a command delimiter + such as ;; or ||, which is usually command name completion. If + multiple options are supplied, the --DD option takes precedence + over --EE, and both take precedence over --II. If any of --DD, --EE, or + --II are supplied, any other _n_a_m_e arguments are ignored; these + completions only apply to the case specified by the option. + + The process of applying these completion specifications when + word completion is attempted is described above under PPrrooggrraamm-- mmaabbllee CCoommpplleettiioonn. - Other options, if specified, have the following meanings. The - arguments to the --GG, --WW, and --XX options (and, if necessary, the - --PP and --SS options) should be quoted to protect them from expan- + Other options, if specified, have the following meanings. The + arguments to the --GG, --WW, and --XX options (and, if necessary, the + --PP and --SS options) should be quoted to protect them from expan- sion before the ccoommpplleettee builtin is invoked. --oo _c_o_m_p_-_o_p_t_i_o_n - The _c_o_m_p_-_o_p_t_i_o_n controls several aspects of the comp- - spec's behavior beyond the simple generation of comple- + The _c_o_m_p_-_o_p_t_i_o_n controls several aspects of the comp- + spec's behavior beyond the simple generation of comple- tions. _c_o_m_p_-_o_p_t_i_o_n may be one of: bbaasshhddeeffaauulltt Perform the rest of the default bbaasshh completions if the compspec generates no matches. - ddeeffaauulltt Use readline's default filename completion if + ddeeffaauulltt Use readline's default filename completion if the compspec generates no matches. ddiirrnnaammeess - Perform directory name completion if the comp- + Perform directory name completion if the comp- spec generates no matches. ffiilleennaammeess - Tell readline that the compspec generates file- - names, so it can perform any filename-specific - processing (like adding a slash to directory - names, quoting special characters, or suppress- - ing trailing spaces). Intended to be used with + Tell readline that the compspec generates file- + names, so it can perform any filename-specific + processing (like adding a slash to directory + names, quoting special characters, or suppress- + ing trailing spaces). Intended to be used with shell functions. - nnooqquuoottee Tell readline not to quote the completed words - if they are filenames (quoting filenames is the + nnooqquuoottee Tell readline not to quote the completed words + if they are filenames (quoting filenames is the default). - nnoossoorrtt Tell readline not to sort the list of possible + nnoossoorrtt Tell readline not to sort the list of possible completions alphabetically. - nnoossppaaccee Tell readline not to append a space (the - default) to words completed at the end of the + nnoossppaaccee Tell readline not to append a space (the + default) to words completed at the end of the line. pplluussddiirrss - After any matches defined by the compspec are - generated, directory name completion is - attempted and any matches are added to the + After any matches defined by the compspec are + generated, directory name completion is + attempted and any matches are added to the results of the other actions. --AA _a_c_t_i_o_n - The _a_c_t_i_o_n may be one of the following to generate a + The _a_c_t_i_o_n may be one of the following to generate a list of possible completions: aalliiaass Alias names. May also be specified as --aa. aarrrraayyvvaarr Array variable names. bbiinnddiinngg RReeaaddlliinnee key binding names. - bbuuiillttiinn Names of shell builtin commands. May also be + bbuuiillttiinn Names of shell builtin commands. May also be specified as --bb. ccoommmmaanndd Command names. May also be specified as --cc. ddiirreeccttoorryy @@ -4451,7 +4476,7 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS ddiissaabblleedd Names of disabled shell builtins. eennaabblleedd Names of enabled shell builtins. - eexxppoorrtt Names of exported shell variables. May also be + eexxppoorrtt Names of exported shell variables. May also be specified as --ee. ffiillee File names. May also be specified as --ff. ffuunnccttiioonn @@ -4460,17 +4485,17 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS hheellppttooppiicc Help topics as accepted by the hheellpp builtin. hhoossttnnaammee - Hostnames, as taken from the file specified by + Hostnames, as taken from the file specified by the HHOOSSTTFFIILLEE shell variable. - jjoobb Job names, if job control is active. May also + jjoobb Job names, if job control is active. May also be specified as --jj. - kkeeyywwoorrdd Shell reserved words. May also be specified as + kkeeyywwoorrdd Shell reserved words. May also be specified as --kk. rruunnnniinngg Names of running jobs, if job control is active. sseerrvviiccee Service names. May also be specified as --ss. - sseettoopptt Valid arguments for the --oo option to the sseett + sseettoopptt Valid arguments for the --oo option to the sseett builtin. - sshhoopptt Shell option names as accepted by the sshhoopptt + sshhoopptt Shell option names as accepted by the sshhoopptt builtin. ssiiggnnaall Signal names. ssttooppppeedd Names of stopped jobs, if job control is active. @@ -4479,190 +4504,194 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS Names of all shell variables. May also be spec- ified as --vv. --CC _c_o_m_m_a_n_d - _c_o_m_m_a_n_d is executed in a subshell environment, and its + _c_o_m_m_a_n_d is executed in a subshell environment, and its output is used as the possible completions. --FF _f_u_n_c_t_i_o_n - The shell function _f_u_n_c_t_i_o_n is executed in the current - shell environment. When the function is executed, the - first argument ($$11) is the name of the command whose - arguments are being completed, the second argument ($$22) + The shell function _f_u_n_c_t_i_o_n is executed in the current + shell environment. When the function is executed, the + first argument ($$11) is the name of the command whose + arguments are being completed, the second argument ($$22) is the word being completed, and the third argument ($$33) - is the word preceding the word being completed on the - current command line. When it finishes, the possible - completions are retrieved from the value of the CCOOMMPPRREE-- + is the word preceding the word being completed on the + current command line. When it finishes, the possible + completions are retrieved from the value of the CCOOMMPPRREE-- PPLLYY array variable. --GG _g_l_o_b_p_a_t - The pathname expansion pattern _g_l_o_b_p_a_t is expanded to + The pathname expansion pattern _g_l_o_b_p_a_t is expanded to generate the possible completions. --PP _p_r_e_f_i_x - _p_r_e_f_i_x is added at the beginning of each possible com- + _p_r_e_f_i_x is added at the beginning of each possible com- pletion after all other options have been applied. --SS _s_u_f_f_i_x _s_u_f_f_i_x is appended to each possible completion after all other options have been applied. --WW _w_o_r_d_l_i_s_t - The _w_o_r_d_l_i_s_t is split using the characters in the IIFFSS - special variable as delimiters, and each resultant word - is expanded. Shell quoting is honored within _w_o_r_d_l_i_s_t, + The _w_o_r_d_l_i_s_t is split using the characters in the IIFFSS + special variable as delimiters, and each resultant word + is expanded. Shell quoting is honored within _w_o_r_d_l_i_s_t, in order to provide a mechanism for the words to contain - shell metacharacters or characters in the value of IIFFSS. - The possible completions are the members of the resul- + shell metacharacters or characters in the value of IIFFSS. + The possible completions are the members of the resul- tant list which match the word being completed. --XX _f_i_l_t_e_r_p_a_t - _f_i_l_t_e_r_p_a_t is a pattern as used for pathname expansion. + _f_i_l_t_e_r_p_a_t is a pattern as used for pathname expansion. It is applied to the list of possible completions gener- - ated by the preceding options and arguments, and each - completion matching _f_i_l_t_e_r_p_a_t is removed from the list. - A leading !! in _f_i_l_t_e_r_p_a_t negates the pattern; in this + ated by the preceding options and arguments, and each + completion matching _f_i_l_t_e_r_p_a_t is removed from the list. + A leading !! in _f_i_l_t_e_r_p_a_t negates the pattern; in this case, any completion not matching _f_i_l_t_e_r_p_a_t is removed. - The return value is true unless an invalid option is supplied, - an option other than --pp or --rr is supplied without a _n_a_m_e argu- - ment, an attempt is made to remove a completion specification + The return value is true unless an invalid option is supplied, + an option other than --pp or --rr is supplied without a _n_a_m_e argu- + ment, an attempt is made to remove a completion specification for a _n_a_m_e for which no specification exists, or an error occurs adding a completion specification. - ccoommppoopptt [--oo _o_p_t_i_o_n] [--DDEE] [++oo _o_p_t_i_o_n] [_n_a_m_e] + ccoommppoopptt [--oo _o_p_t_i_o_n] [--DDEEII] [++oo _o_p_t_i_o_n] [_n_a_m_e] Modify completion options for each _n_a_m_e according to the - _o_p_t_i_o_ns, or for the currently-executing completion if no _n_a_m_es - are supplied. If no _o_p_t_i_o_ns are given, display the completion - options for each _n_a_m_e or the current completion. The possible - values of _o_p_t_i_o_n are those valid for the ccoommpplleettee builtin - described above. The --DD option indicates that the remaining + _o_p_t_i_o_ns, or for the currently-executing completion if no _n_a_m_es + are supplied. If no _o_p_t_i_o_ns are given, display the completion + options for each _n_a_m_e or the current completion. The possible + values of _o_p_t_i_o_n are those valid for the ccoommpplleettee builtin + described above. The --DD option indicates that other supplied options should apply to the ``default'' command completion; that - is, completion attempted on a command for which no completion - has previously been defined. The --EE option indicates that the - remaining options should apply to ``empty'' command completion; - that is, completion attempted on a blank line. - - The return value is true unless an invalid option is supplied, + is, completion attempted on a command for which no completion + has previously been defined. The --EE option indicates that other + supplied options should apply to ``empty'' command completion; + that is, completion attempted on a blank line. The --II option + indicates that other supplied options should apply to completion + on the inital non-assignment word on the line, or after a com- + mand delimiter such as ;; or ||, which is usually command name + completion. + + The return value is true unless an invalid option is supplied, an attempt is made to modify the options for a _n_a_m_e for which no completion specification exists, or an output error occurs. ccoonnttiinnuuee [_n] Resume the next iteration of the enclosing ffoorr, wwhhiillee, uunnttiill, or - sseelleecctt loop. If _n is specified, resume at the _nth enclosing - loop. _n must be >= 1. If _n is greater than the number of - enclosing loops, the last enclosing loop (the ``top-level'' + sseelleecctt loop. If _n is specified, resume at the _nth enclosing + loop. _n must be >= 1. If _n is greater than the number of + enclosing loops, the last enclosing loop (the ``top-level'' loop) is resumed. The return value is 0 unless _n is not greater than or equal to 1. ddeeccllaarree [--aaAAffFFggiillnnrrttuuxx] [--pp] [_n_a_m_e[=_v_a_l_u_e] ...] ttyyppeesseett [--aaAAffFFggiillnnrrttuuxx] [--pp] [_n_a_m_e[=_v_a_l_u_e] ...] - Declare variables and/or give them attributes. If no _n_a_m_es are - given then display the values of variables. The --pp option will + Declare variables and/or give them attributes. If no _n_a_m_es are + given then display the values of variables. The --pp option will display the attributes and values of each _n_a_m_e. When --pp is used - with _n_a_m_e arguments, additional options, other than --ff and --FF, - are ignored. When --pp is supplied without _n_a_m_e arguments, it - will display the attributes and values of all variables having + with _n_a_m_e arguments, additional options, other than --ff and --FF, + are ignored. When --pp is supplied without _n_a_m_e arguments, it + will display the attributes and values of all variables having the attributes specified by the additional options. If no other - options are supplied with --pp, ddeeccllaarree will display the - attributes and values of all shell variables. The --ff option - will restrict the display to shell functions. The --FF option - inhibits the display of function definitions; only the function - name and attributes are printed. If the eexxttddeebbuugg shell option - is enabled using sshhoopptt, the source file name and line number + options are supplied with --pp, ddeeccllaarree will display the + attributes and values of all shell variables. The --ff option + will restrict the display to shell functions. The --FF option + inhibits the display of function definitions; only the function + name and attributes are printed. If the eexxttddeebbuugg shell option + is enabled using sshhoopptt, the source file name and line number where each _n_a_m_e is defined are displayed as well. The --FF option - implies --ff. The --gg option forces variables to be created or + implies --ff. The --gg option forces variables to be created or modified at the global scope, even when ddeeccllaarree is executed in a - shell function. It is ignored in all other cases. The follow- + shell function. It is ignored in all other cases. The follow- ing options can be used to restrict output to variables with the specified attribute or to give variables attributes: - --aa Each _n_a_m_e is an indexed array variable (see AArrrraayyss + --aa Each _n_a_m_e is an indexed array variable (see AArrrraayyss above). - --AA Each _n_a_m_e is an associative array variable (see AArrrraayyss + --AA Each _n_a_m_e is an associative array variable (see AArrrraayyss above). --ff Use function names only. --ii The variable is treated as an integer; arithmetic evalua- - tion (see AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN above) is performed when + tion (see AARRIITTHHMMEETTIICC EEVVAALLUUAATTIIOONN above) is performed when the variable is assigned a value. - --ll When the variable is assigned a value, all upper-case - characters are converted to lower-case. The upper-case + --ll When the variable is assigned a value, all upper-case + characters are converted to lower-case. The upper-case attribute is disabled. - --nn Give each _n_a_m_e the _n_a_m_e_r_e_f attribute, making it a name - reference to another variable. That other variable is - defined by the value of _n_a_m_e. All references, assign- - ments, and attribute modifications to _n_a_m_e, except those - using or changing the --nn attribute itself, are performed - on the variable referenced by _n_a_m_e's value. The nameref + --nn Give each _n_a_m_e the _n_a_m_e_r_e_f attribute, making it a name + reference to another variable. That other variable is + defined by the value of _n_a_m_e. All references, assign- + ments, and attribute modifications to _n_a_m_e, except those + using or changing the --nn attribute itself, are performed + on the variable referenced by _n_a_m_e's value. The nameref attribute cannot be applied to array variables. --rr Make _n_a_m_es readonly. These names cannot then be assigned values by subsequent assignment statements or unset. - --tt Give each _n_a_m_e the _t_r_a_c_e attribute. Traced functions - inherit the DDEEBBUUGG and RREETTUURRNN traps from the calling - shell. The trace attribute has no special meaning for + --tt Give each _n_a_m_e the _t_r_a_c_e attribute. Traced functions + inherit the DDEEBBUUGG and RREETTUURRNN traps from the calling + shell. The trace attribute has no special meaning for variables. - --uu When the variable is assigned a value, all lower-case - characters are converted to upper-case. The lower-case + --uu When the variable is assigned a value, all lower-case + characters are converted to upper-case. The lower-case attribute is disabled. - --xx Mark _n_a_m_es for export to subsequent commands via the + --xx Mark _n_a_m_es for export to subsequent commands via the environment. - Using `+' instead of `-' turns off the attribute instead, with + Using `+' instead of `-' turns off the attribute instead, with the exceptions that ++aa may not be used to destroy an array vari- - able and ++rr will not remove the readonly attribute. When used + able and ++rr will not remove the readonly attribute. When used in a function, ddeeccllaarree and ttyyppeesseett make each _n_a_m_e local, as with the llooccaall command, unless the --gg option is supplied. If a vari- - able name is followed by =_v_a_l_u_e, the value of the variable is - set to _v_a_l_u_e. When using --aa or --AA and the compound assignment - syntax to create array variables, additional attributes do not + able name is followed by =_v_a_l_u_e, the value of the variable is + set to _v_a_l_u_e. When using --aa or --AA and the compound assignment + syntax to create array variables, additional attributes do not take effect until subsequent assignments. The return value is 0 - unless an invalid option is encountered, an attempt is made to - define a function using ``-f foo=bar'', an attempt is made to - assign a value to a readonly variable, an attempt is made to - assign a value to an array variable without using the compound - assignment syntax (see AArrrraayyss above), one of the _n_a_m_e_s is not a - valid shell variable name, an attempt is made to turn off read- - only status for a readonly variable, an attempt is made to turn + unless an invalid option is encountered, an attempt is made to + define a function using ``-f foo=bar'', an attempt is made to + assign a value to a readonly variable, an attempt is made to + assign a value to an array variable without using the compound + assignment syntax (see AArrrraayyss above), one of the _n_a_m_e_s is not a + valid shell variable name, an attempt is made to turn off read- + only status for a readonly variable, an attempt is made to turn off array status for an array variable, or an attempt is made to display a non-existent function with --ff. ddiirrss [[--ccllppvv]] [[++_n]] [[--_n]] - Without options, displays the list of currently remembered - directories. The default display is on a single line with - directory names separated by spaces. Directories are added to - the list with the ppuusshhdd command; the ppooppdd command removes - entries from the list. The current directory is always the + Without options, displays the list of currently remembered + directories. The default display is on a single line with + directory names separated by spaces. Directories are added to + the list with the ppuusshhdd command; the ppooppdd command removes + entries from the list. The current directory is always the first directory in the stack. --cc Clears the directory stack by deleting all of the entries. - --ll Produces a listing using full pathnames; the default + --ll Produces a listing using full pathnames; the default listing format uses a tilde to denote the home directory. --pp Print the directory stack with one entry per line. - --vv Print the directory stack with one entry per line, pre- + --vv Print the directory stack with one entry per line, pre- fixing each entry with its index in the stack. ++_n Displays the _nth entry counting from the left of the list shown by ddiirrss when invoked without options, starting with zero. - --_n Displays the _nth entry counting from the right of the + --_n Displays the _nth entry counting from the right of the list shown by ddiirrss when invoked without options, starting with zero. - The return value is 0 unless an invalid option is supplied or _n + The return value is 0 unless an invalid option is supplied or _n indexes beyond the end of the directory stack. ddiissoowwnn [--aarr] [--hh] [_j_o_b_s_p_e_c ... | _p_i_d ... ] - Without options, remove each _j_o_b_s_p_e_c from the table of active - jobs. If _j_o_b_s_p_e_c is not present, and neither the --aa nor the --rr - option is supplied, the _c_u_r_r_e_n_t _j_o_b is used. If the --hh option - is given, each _j_o_b_s_p_e_c is not removed from the table, but is - marked so that SSIIGGHHUUPP is not sent to the job if the shell - receives a SSIIGGHHUUPP. If no _j_o_b_s_p_e_c is supplied, the --aa option - means to remove or mark all jobs; the --rr option without a _j_o_b_- - _s_p_e_c argument restricts operation to running jobs. The return + Without options, remove each _j_o_b_s_p_e_c from the table of active + jobs. If _j_o_b_s_p_e_c is not present, and neither the --aa nor the --rr + option is supplied, the _c_u_r_r_e_n_t _j_o_b is used. If the --hh option + is given, each _j_o_b_s_p_e_c is not removed from the table, but is + marked so that SSIIGGHHUUPP is not sent to the job if the shell + receives a SSIIGGHHUUPP. If no _j_o_b_s_p_e_c is supplied, the --aa option + means to remove or mark all jobs; the --rr option without a _j_o_b_- + _s_p_e_c argument restricts operation to running jobs. The return value is 0 unless a _j_o_b_s_p_e_c does not specify a valid job. eecchhoo [--nneeEE] [_a_r_g ...] - Output the _a_r_gs, separated by spaces, followed by a newline. - The return status is 0 unless a write error occurs. If --nn is + Output the _a_r_gs, separated by spaces, followed by a newline. + The return status is 0 unless a write error occurs. If --nn is specified, the trailing newline is suppressed. If the --ee option - is given, interpretation of the following backslash-escaped - characters is enabled. The --EE option disables the interpreta- - tion of these escape characters, even on systems where they are - interpreted by default. The xxppgg__eecchhoo shell option may be used - to dynamically determine whether or not eecchhoo expands these - escape characters by default. eecchhoo does not interpret ---- to - mean the end of options. eecchhoo interprets the following escape + is given, interpretation of the following backslash-escaped + characters is enabled. The --EE option disables the interpreta- + tion of these escape characters, even on systems where they are + interpreted by default. The xxppgg__eecchhoo shell option may be used + to dynamically determine whether or not eecchhoo expands these + escape characters by default. eecchhoo does not interpret ---- to + mean the end of options. eecchhoo interprets the following escape sequences: \\aa alert (bell) \\bb backspace @@ -4675,190 +4704,190 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS \\tt horizontal tab \\vv vertical tab \\\\ backslash - \\00_n_n_n the eight-bit character whose value is the octal value + \\00_n_n_n the eight-bit character whose value is the octal value _n_n_n (zero to three octal digits) - \\xx_H_H the eight-bit character whose value is the hexadecimal + \\xx_H_H the eight-bit character whose value is the hexadecimal value _H_H (one or two hex digits) - \\uu_H_H_H_H the Unicode (ISO/IEC 10646) character whose value is the + \\uu_H_H_H_H the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value _H_H_H_H (one to four hex digits) \\UU_H_H_H_H_H_H_H_H - the Unicode (ISO/IEC 10646) character whose value is the + the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value _H_H_H_H_H_H_H_H (one to eight hex digits) eennaabbllee [--aa] [--ddnnppss] [--ff _f_i_l_e_n_a_m_e] [_n_a_m_e ...] - Enable and disable builtin shell commands. Disabling a builtin + Enable and disable builtin shell commands. Disabling a builtin allows a disk command which has the same name as a shell builtin - to be executed without specifying a full pathname, even though - the shell normally searches for builtins before disk commands. - If --nn is used, each _n_a_m_e is disabled; otherwise, _n_a_m_e_s are + to be executed without specifying a full pathname, even though + the shell normally searches for builtins before disk commands. + If --nn is used, each _n_a_m_e is disabled; otherwise, _n_a_m_e_s are enabled. For example, to use the tteesstt binary found via the PPAATTHH - instead of the shell builtin version, run ``enable -n test''. - The --ff option means to load the new builtin command _n_a_m_e from + instead of the shell builtin version, run ``enable -n test''. + The --ff option means to load the new builtin command _n_a_m_e from shared object _f_i_l_e_n_a_m_e, on systems that support dynamic loading. - The --dd option will delete a builtin previously loaded with --ff. + The --dd option will delete a builtin previously loaded with --ff. If no _n_a_m_e arguments are given, or if the --pp option is supplied, a list of shell builtins is printed. With no other option argu- - ments, the list consists of all enabled shell builtins. If --nn - is supplied, only disabled builtins are printed. If --aa is sup- - plied, the list printed includes all builtins, with an indica- - tion of whether or not each is enabled. If --ss is supplied, the - output is restricted to the POSIX _s_p_e_c_i_a_l builtins. The return - value is 0 unless a _n_a_m_e is not a shell builtin or there is an + ments, the list consists of all enabled shell builtins. If --nn + is supplied, only disabled builtins are printed. If --aa is sup- + plied, the list printed includes all builtins, with an indica- + tion of whether or not each is enabled. If --ss is supplied, the + output is restricted to the POSIX _s_p_e_c_i_a_l builtins. The return + value is 0 unless a _n_a_m_e is not a shell builtin or there is an error loading a new builtin from a shared object. eevvaall [_a_r_g ...] - The _a_r_gs are read and concatenated together into a single com- - mand. This command is then read and executed by the shell, and - its exit status is returned as the value of eevvaall. If there are + The _a_r_gs are read and concatenated together into a single com- + mand. This command is then read and executed by the shell, and + its exit status is returned as the value of eevvaall. If there are no _a_r_g_s, or only null arguments, eevvaall returns 0. eexxeecc [--ccll] [--aa _n_a_m_e] [_c_o_m_m_a_n_d [_a_r_g_u_m_e_n_t_s]] - If _c_o_m_m_a_n_d is specified, it replaces the shell. No new process - is created. The _a_r_g_u_m_e_n_t_s become the arguments to _c_o_m_m_a_n_d. If + If _c_o_m_m_a_n_d is specified, it replaces the shell. No new process + is created. The _a_r_g_u_m_e_n_t_s become the arguments to _c_o_m_m_a_n_d. If the --ll option is supplied, the shell places a dash at the begin- - ning of the zeroth argument passed to _c_o_m_m_a_n_d. This is what + ning of the zeroth argument passed to _c_o_m_m_a_n_d. This is what _l_o_g_i_n(1) does. The --cc option causes _c_o_m_m_a_n_d to be executed with - an empty environment. If --aa is supplied, the shell passes _n_a_m_e + an empty environment. If --aa is supplied, the shell passes _n_a_m_e as the zeroth argument to the executed command. If _c_o_m_m_a_n_d can- - not be executed for some reason, a non-interactive shell exits, - unless the eexxeeccffaaiill shell option is enabled. In that case, it - returns failure. An interactive shell returns failure if the - file cannot be executed. A subshell exits unconditionally if - eexxeecc fails. If _c_o_m_m_a_n_d is not specified, any redirections take - effect in the current shell, and the return status is 0. If + not be executed for some reason, a non-interactive shell exits, + unless the eexxeeccffaaiill shell option is enabled. In that case, it + returns failure. An interactive shell returns failure if the + file cannot be executed. A subshell exits unconditionally if + eexxeecc fails. If _c_o_m_m_a_n_d is not specified, any redirections take + effect in the current shell, and the return status is 0. If there is a redirection error, the return status is 1. eexxiitt [_n] - Cause the shell to exit with a status of _n. If _n is omitted, + Cause the shell to exit with a status of _n. If _n is omitted, the exit status is that of the last command executed. A trap on EEXXIITT is executed before the shell terminates. eexxppoorrtt [--ffnn] [_n_a_m_e[=_w_o_r_d]] ... eexxppoorrtt --pp - The supplied _n_a_m_e_s are marked for automatic export to the envi- - ronment of subsequently executed commands. If the --ff option is - given, the _n_a_m_e_s refer to functions. If no _n_a_m_e_s are given, or - if the --pp option is supplied, a list of names of all exported - variables is printed. The --nn option causes the export property + The supplied _n_a_m_e_s are marked for automatic export to the envi- + ronment of subsequently executed commands. If the --ff option is + given, the _n_a_m_e_s refer to functions. If no _n_a_m_e_s are given, or + if the --pp option is supplied, a list of names of all exported + variables is printed. The --nn option causes the export property to be removed from each _n_a_m_e. If a variable name is followed by =_w_o_r_d, the value of the variable is set to _w_o_r_d. eexxppoorrtt returns an exit status of 0 unless an invalid option is encountered, one - of the _n_a_m_e_s is not a valid shell variable name, or --ff is sup- + of the _n_a_m_e_s is not a valid shell variable name, or --ff is sup- plied with a _n_a_m_e that is not a function. ffcc [--ee _e_n_a_m_e] [--llnnrr] [_f_i_r_s_t] [_l_a_s_t] ffcc --ss [_p_a_t=_r_e_p] [_c_m_d] - The first form selects a range of commands from _f_i_r_s_t to _l_a_s_t - from the history list and displays or edits and re-executes - them. _F_i_r_s_t and _l_a_s_t may be specified as a string (to locate - the last command beginning with that string) or as a number (an - index into the history list, where a negative number is used as - an offset from the current command number). If _l_a_s_t is not + The first form selects a range of commands from _f_i_r_s_t to _l_a_s_t + from the history list and displays or edits and re-executes + them. _F_i_r_s_t and _l_a_s_t may be specified as a string (to locate + the last command beginning with that string) or as a number (an + index into the history list, where a negative number is used as + an offset from the current command number). If _l_a_s_t is not specified, it is set to the current command for listing (so that - ``fc -l -10'' prints the last 10 commands) and to _f_i_r_s_t other- + ``fc -l -10'' prints the last 10 commands) and to _f_i_r_s_t other- wise. If _f_i_r_s_t is not specified, it is set to the previous com- mand for editing and -16 for listing. - The --nn option suppresses the command numbers when listing. The - --rr option reverses the order of the commands. If the --ll option - is given, the commands are listed on standard output. Other- - wise, the editor given by _e_n_a_m_e is invoked on a file containing - those commands. If _e_n_a_m_e is not given, the value of the FFCCEEDDIITT - variable is used, and the value of EEDDIITTOORR if FFCCEEDDIITT is not set. - If neither variable is set, _v_i is used. When editing is com- + The --nn option suppresses the command numbers when listing. The + --rr option reverses the order of the commands. If the --ll option + is given, the commands are listed on standard output. Other- + wise, the editor given by _e_n_a_m_e is invoked on a file containing + those commands. If _e_n_a_m_e is not given, the value of the FFCCEEDDIITT + variable is used, and the value of EEDDIITTOORR if FFCCEEDDIITT is not set. + If neither variable is set, _v_i is used. When editing is com- plete, the edited commands are echoed and executed. - In the second form, _c_o_m_m_a_n_d is re-executed after each instance - of _p_a_t is replaced by _r_e_p. _C_o_m_m_a_n_d is interpreted the same as - _f_i_r_s_t above. A useful alias to use with this is ``r="fc -s"'', - so that typing ``r cc'' runs the last command beginning with + In the second form, _c_o_m_m_a_n_d is re-executed after each instance + of _p_a_t is replaced by _r_e_p. _C_o_m_m_a_n_d is interpreted the same as + _f_i_r_s_t above. A useful alias to use with this is ``r="fc -s"'', + so that typing ``r cc'' runs the last command beginning with ``cc'' and typing ``r'' re-executes the last command. - If the first form is used, the return value is 0 unless an - invalid option is encountered or _f_i_r_s_t or _l_a_s_t specify history - lines out of range. If the --ee option is supplied, the return + If the first form is used, the return value is 0 unless an + invalid option is encountered or _f_i_r_s_t or _l_a_s_t specify history + lines out of range. If the --ee option is supplied, the return value is the value of the last command executed or failure if an error occurs with the temporary file of commands. If the second - form is used, the return status is that of the command re-exe- - cuted, unless _c_m_d does not specify a valid history line, in + form is used, the return status is that of the command re-exe- + cuted, unless _c_m_d does not specify a valid history line, in which case ffcc returns failure. ffgg [_j_o_b_s_p_e_c] - Resume _j_o_b_s_p_e_c in the foreground, and make it the current job. + Resume _j_o_b_s_p_e_c in the foreground, and make it the current job. If _j_o_b_s_p_e_c is not present, the shell's notion of the _c_u_r_r_e_n_t _j_o_b - is used. The return value is that of the command placed into - the foreground, or failure if run when job control is disabled + is used. The return value is that of the command placed into + the foreground, or failure if run when job control is disabled or, when run with job control enabled, if _j_o_b_s_p_e_c does not spec- - ify a valid job or _j_o_b_s_p_e_c specifies a job that was started + ify a valid job or _j_o_b_s_p_e_c specifies a job that was started without job control. ggeettooppttss _o_p_t_s_t_r_i_n_g _n_a_m_e [_a_r_g_s] - ggeettooppttss is used by shell procedures to parse positional parame- - ters. _o_p_t_s_t_r_i_n_g contains the option characters to be recog- - nized; if a character is followed by a colon, the option is - expected to have an argument, which should be separated from it - by white space. The colon and question mark characters may not - be used as option characters. Each time it is invoked, ggeettooppttss - places the next option in the shell variable _n_a_m_e, initializing + ggeettooppttss is used by shell procedures to parse positional parame- + ters. _o_p_t_s_t_r_i_n_g contains the option characters to be recog- + nized; if a character is followed by a colon, the option is + expected to have an argument, which should be separated from it + by white space. The colon and question mark characters may not + be used as option characters. Each time it is invoked, ggeettooppttss + places the next option in the shell variable _n_a_m_e, initializing _n_a_m_e if it does not exist, and the index of the next argument to be processed into the variable OOPPTTIINNDD. OOPPTTIINNDD is initialized to - 1 each time the shell or a shell script is invoked. When an - option requires an argument, ggeettooppttss places that argument into - the variable OOPPTTAARRGG. The shell does not reset OOPPTTIINNDD automati- - cally; it must be manually reset between multiple calls to + 1 each time the shell or a shell script is invoked. When an + option requires an argument, ggeettooppttss places that argument into + the variable OOPPTTAARRGG. The shell does not reset OOPPTTIINNDD automati- + cally; it must be manually reset between multiple calls to ggeettooppttss within the same shell invocation if a new set of parame- ters is to be used. - When the end of options is encountered, ggeettooppttss exits with a - return value greater than zero. OOPPTTIINNDD is set to the index of + When the end of options is encountered, ggeettooppttss exits with a + return value greater than zero. OOPPTTIINNDD is set to the index of the first non-option argument, and _n_a_m_e is set to ?. - ggeettooppttss normally parses the positional parameters, but if more + ggeettooppttss normally parses the positional parameters, but if more arguments are given in _a_r_g_s, ggeettooppttss parses those instead. - ggeettooppttss can report errors in two ways. If the first character - of _o_p_t_s_t_r_i_n_g is a colon, _s_i_l_e_n_t error reporting is used. In - normal operation, diagnostic messages are printed when invalid - options or missing option arguments are encountered. If the - variable OOPPTTEERRRR is set to 0, no error messages will be dis- + ggeettooppttss can report errors in two ways. If the first character + of _o_p_t_s_t_r_i_n_g is a colon, _s_i_l_e_n_t error reporting is used. In + normal operation, diagnostic messages are printed when invalid + options or missing option arguments are encountered. If the + variable OOPPTTEERRRR is set to 0, no error messages will be dis- played, even if the first character of _o_p_t_s_t_r_i_n_g is not a colon. If an invalid option is seen, ggeettooppttss places ? into _n_a_m_e and, if - not silent, prints an error message and unsets OOPPTTAARRGG. If - ggeettooppttss is silent, the option character found is placed in + not silent, prints an error message and unsets OOPPTTAARRGG. If + ggeettooppttss is silent, the option character found is placed in OOPPTTAARRGG and no diagnostic message is printed. - If a required argument is not found, and ggeettooppttss is not silent, - a question mark (??) is placed in _n_a_m_e, OOPPTTAARRGG is unset, and a - diagnostic message is printed. If ggeettooppttss is silent, then a - colon (::) is placed in _n_a_m_e and OOPPTTAARRGG is set to the option + If a required argument is not found, and ggeettooppttss is not silent, + a question mark (??) is placed in _n_a_m_e, OOPPTTAARRGG is unset, and a + diagnostic message is printed. If ggeettooppttss is silent, then a + colon (::) is placed in _n_a_m_e and OOPPTTAARRGG is set to the option character found. - ggeettooppttss returns true if an option, specified or unspecified, is + ggeettooppttss returns true if an option, specified or unspecified, is found. It returns false if the end of options is encountered or an error occurs. hhaasshh [--llrr] [--pp _f_i_l_e_n_a_m_e] [--ddtt] [_n_a_m_e] Each time hhaasshh is invoked, the full pathname of the command _n_a_m_e - is determined by searching the directories in $$PPAATTHH and remem- + is determined by searching the directories in $$PPAATTHH and remem- bered. Any previously-remembered pathname is discarded. If the --pp option is supplied, no path search is performed, and _f_i_l_e_n_a_m_e - is used as the full filename of the command. The --rr option - causes the shell to forget all remembered locations. The --dd - option causes the shell to forget the remembered location of - each _n_a_m_e. If the --tt option is supplied, the full pathname to - which each _n_a_m_e corresponds is printed. If multiple _n_a_m_e argu- - ments are supplied with --tt, the _n_a_m_e is printed before the - hashed full pathname. The --ll option causes output to be dis- + is used as the full filename of the command. The --rr option + causes the shell to forget all remembered locations. The --dd + option causes the shell to forget the remembered location of + each _n_a_m_e. If the --tt option is supplied, the full pathname to + which each _n_a_m_e corresponds is printed. If multiple _n_a_m_e argu- + ments are supplied with --tt, the _n_a_m_e is printed before the + hashed full pathname. The --ll option causes output to be dis- played in a format that may be reused as input. If no arguments - are given, or if only --ll is supplied, information about remem- - bered commands is printed. The return status is true unless a + are given, or if only --ll is supplied, information about remem- + bered commands is printed. The return status is true unless a _n_a_m_e is not found or an invalid option is supplied. hheellpp [--ddmmss] [_p_a_t_t_e_r_n] - Display helpful information about builtin commands. If _p_a_t_t_e_r_n - is specified, hheellpp gives detailed help on all commands matching - _p_a_t_t_e_r_n; otherwise help for all the builtins and shell control + Display helpful information about builtin commands. If _p_a_t_t_e_r_n + is specified, hheellpp gives detailed help on all commands matching + _p_a_t_t_e_r_n; otherwise help for all the builtins and shell control structures is printed. --dd Display a short description of each _p_a_t_t_e_r_n --mm Display the description of each _p_a_t_t_e_r_n in a manpage-like @@ -4876,53 +4905,53 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS hhiissttoorryy --ss _a_r_g [_a_r_g _._._.] With no options, display the command history list with line num- bers. Lines listed with a ** have been modified. An argument of - _n lists only the last _n lines. If the shell variable HHIISSTTTTIIMMEE-- - FFOORRMMAATT is set and not null, it is used as a format string for - _s_t_r_f_t_i_m_e(3) to display the time stamp associated with each dis- - played history entry. No intervening blank is printed between - the formatted time stamp and the history line. If _f_i_l_e_n_a_m_e is - supplied, it is used as the name of the history file; if not, - the value of HHIISSTTFFIILLEE is used. Options, if supplied, have the + _n lists only the last _n lines. If the shell variable HHIISSTTTTIIMMEE-- + FFOORRMMAATT is set and not null, it is used as a format string for + _s_t_r_f_t_i_m_e(3) to display the time stamp associated with each dis- + played history entry. No intervening blank is printed between + the formatted time stamp and the history line. If _f_i_l_e_n_a_m_e is + supplied, it is used as the name of the history file; if not, + the value of HHIISSTTFFIILLEE is used. Options, if supplied, have the following meanings: --cc Clear the history list by deleting all the entries. --dd _o_f_f_s_e_t - Delete the history entry at position _o_f_f_s_e_t. If _o_f_f_s_e_t + Delete the history entry at position _o_f_f_s_e_t. If _o_f_f_s_e_t is negative, it is interpreted as relative to one greater than the last history position, so negative indices count - back from the end of the history, and an index of -1 + back from the end of the history, and an index of -1 refers to the current hhiissttoorryy --dd command. --dd _s_t_a_r_t-_e_n_d - Delete the history entries between positions _s_t_a_r_t and - _e_n_d, inclusive. Positive and negative values for _s_t_a_r_t + Delete the history entries between positions _s_t_a_r_t and + _e_n_d, inclusive. Positive and negative values for _s_t_a_r_t and _e_n_d are interpreted as described above. - --aa Append the ``new'' history lines to the history file. - These are history lines entered since the beginning of + --aa Append the ``new'' history lines to the history file. + These are history lines entered since the beginning of the current bbaasshh session, but not already appended to the history file. - --nn Read the history lines not already read from the history - file into the current history list. These are lines - appended to the history file since the beginning of the + --nn Read the history lines not already read from the history + file into the current history list. These are lines + appended to the history file since the beginning of the current bbaasshh session. - --rr Read the contents of the history file and append them to + --rr Read the contents of the history file and append them to the current history list. --ww Write the current history list to the history file, over- writing the history file's contents. - --pp Perform history substitution on the following _a_r_g_s and - display the result on the standard output. Does not - store the results in the history list. Each _a_r_g must be + --pp Perform history substitution on the following _a_r_g_s and + display the result on the standard output. Does not + store the results in the history list. Each _a_r_g must be quoted to disable normal history expansion. - --ss Store the _a_r_g_s in the history list as a single entry. - The last command in the history list is removed before + --ss Store the _a_r_g_s in the history list as a single entry. + The last command in the history list is removed before the _a_r_g_s are added. - If the HHIISSTTTTIIMMEEFFOORRMMAATT variable is set, the time stamp informa- - tion associated with each history entry is written to the his- - tory file, marked with the history comment character. When the - history file is read, lines beginning with the history comment - character followed immediately by a digit are interpreted as + If the HHIISSTTTTIIMMEEFFOORRMMAATT variable is set, the time stamp informa- + tion associated with each history entry is written to the his- + tory file, marked with the history comment character. When the + history file is read, lines beginning with the history comment + character followed immediately by a digit are interpreted as timestamps for the following history entry. The return value is 0 unless an invalid option is encountered, an error occurs while - reading or writing the history file, an invalid _o_f_f_s_e_t is sup- + reading or writing the history file, an invalid _o_f_f_s_e_t is sup- plied as an argument to --dd, or the history expansion supplied as an argument to --pp fails. @@ -4931,210 +4960,210 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS The first form lists the active jobs. The options have the fol- lowing meanings: --ll List process IDs in addition to the normal information. - --nn Display information only about jobs that have changed + --nn Display information only about jobs that have changed status since the user was last notified of their status. - --pp List only the process ID of the job's process group + --pp List only the process ID of the job's process group leader. --rr Display only running jobs. --ss Display only stopped jobs. - If _j_o_b_s_p_e_c is given, output is restricted to information about - that job. The return status is 0 unless an invalid option is + If _j_o_b_s_p_e_c is given, output is restricted to information about + that job. The return status is 0 unless an invalid option is encountered or an invalid _j_o_b_s_p_e_c is supplied. If the --xx option is supplied, jjoobbss replaces any _j_o_b_s_p_e_c found in - _c_o_m_m_a_n_d or _a_r_g_s with the corresponding process group ID, and + _c_o_m_m_a_n_d or _a_r_g_s with the corresponding process group ID, and executes _c_o_m_m_a_n_d passing it _a_r_g_s, returning its exit status. kkiillll [--ss _s_i_g_s_p_e_c | --nn _s_i_g_n_u_m | --_s_i_g_s_p_e_c] [_p_i_d | _j_o_b_s_p_e_c] ... kkiillll --ll|--LL [_s_i_g_s_p_e_c | _e_x_i_t___s_t_a_t_u_s] - Send the signal named by _s_i_g_s_p_e_c or _s_i_g_n_u_m to the processes - named by _p_i_d or _j_o_b_s_p_e_c. _s_i_g_s_p_e_c is either a case-insensitive - signal name such as SSIIGGKKIILLLL (with or without the SSIIGG prefix) or - a signal number; _s_i_g_n_u_m is a signal number. If _s_i_g_s_p_e_c is not - present, then SSIIGGTTEERRMM is assumed. An argument of --ll lists the - signal names. If any arguments are supplied when --ll is given, - the names of the signals corresponding to the arguments are + Send the signal named by _s_i_g_s_p_e_c or _s_i_g_n_u_m to the processes + named by _p_i_d or _j_o_b_s_p_e_c. _s_i_g_s_p_e_c is either a case-insensitive + signal name such as SSIIGGKKIILLLL (with or without the SSIIGG prefix) or + a signal number; _s_i_g_n_u_m is a signal number. If _s_i_g_s_p_e_c is not + present, then SSIIGGTTEERRMM is assumed. An argument of --ll lists the + signal names. If any arguments are supplied when --ll is given, + the names of the signals corresponding to the arguments are listed, and the return status is 0. The _e_x_i_t___s_t_a_t_u_s argument to - --ll is a number specifying either a signal number or the exit - status of a process terminated by a signal. The --LL option is - equivalent to --ll. kkiillll returns true if at least one signal was - successfully sent, or false if an error occurs or an invalid + --ll is a number specifying either a signal number or the exit + status of a process terminated by a signal. The --LL option is + equivalent to --ll. kkiillll returns true if at least one signal was + successfully sent, or false if an error occurs or an invalid option is encountered. lleett _a_r_g [_a_r_g ...] Each _a_r_g is an arithmetic expression to be evaluated (see AARRIITTHH-- - MMEETTIICC EEVVAALLUUAATTIIOONN above). If the last _a_r_g evaluates to 0, lleett + MMEETTIICC EEVVAALLUUAATTIIOONN above). If the last _a_r_g evaluates to 0, lleett returns 1; 0 is returned otherwise. llooccaall [_o_p_t_i_o_n] [_n_a_m_e[=_v_a_l_u_e] ... | - ] - For each argument, a local variable named _n_a_m_e is created, and - assigned _v_a_l_u_e. The _o_p_t_i_o_n can be any of the options accepted + For each argument, a local variable named _n_a_m_e is created, and + assigned _v_a_l_u_e. The _o_p_t_i_o_n can be any of the options accepted by ddeeccllaarree. When llooccaall is used within a function, it causes the - variable _n_a_m_e to have a visible scope restricted to that func- - tion and its children. If _n_a_m_e is -, the set of shell options - is made local to the function in which llooccaall is invoked: shell - options changed using the sseett builtin inside the function are - restored to their original values when the function returns. - With no operands, llooccaall writes a list of local variables to the - standard output. It is an error to use llooccaall when not within a + variable _n_a_m_e to have a visible scope restricted to that func- + tion and its children. If _n_a_m_e is -, the set of shell options + is made local to the function in which llooccaall is invoked: shell + options changed using the sseett builtin inside the function are + restored to their original values when the function returns. + With no operands, llooccaall writes a list of local variables to the + standard output. It is an error to use llooccaall when not within a function. The return status is 0 unless llooccaall is used outside a - function, an invalid _n_a_m_e is supplied, or _n_a_m_e is a readonly + function, an invalid _n_a_m_e is supplied, or _n_a_m_e is a readonly variable. llooggoouutt Exit a login shell. - mmaappffiillee [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC + mmaappffiillee [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y] rreeaaddaarrrraayy [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y] - Read lines from the standard input into the indexed array vari- - able _a_r_r_a_y, or from file descriptor _f_d if the --uu option is sup- - plied. The variable MMAAPPFFIILLEE is the default _a_r_r_a_y. Options, if + Read lines from the standard input into the indexed array vari- + able _a_r_r_a_y, or from file descriptor _f_d if the --uu option is sup- + plied. The variable MMAAPPFFIILLEE is the default _a_r_r_a_y. Options, if supplied, have the following meanings: - --dd The first character of _d_e_l_i_m is used to terminate each - input line, rather than newline. If _d_e_l_i_m is the empty + --dd The first character of _d_e_l_i_m is used to terminate each + input line, rather than newline. If _d_e_l_i_m is the empty string, mmaappffiillee will terminate a line when it reads a NUL character. - --nn Copy at most _c_o_u_n_t lines. If _c_o_u_n_t is 0, all lines are + --nn Copy at most _c_o_u_n_t lines. If _c_o_u_n_t is 0, all lines are copied. - --OO Begin assigning to _a_r_r_a_y at index _o_r_i_g_i_n. The default + --OO Begin assigning to _a_r_r_a_y at index _o_r_i_g_i_n. The default index is 0. --ss Discard the first _c_o_u_n_t lines read. - --tt Remove a trailing _d_e_l_i_m (default newline) from each line + --tt Remove a trailing _d_e_l_i_m (default newline) from each line read. - --uu Read lines from file descriptor _f_d instead of the stan- + --uu Read lines from file descriptor _f_d instead of the stan- dard input. - --CC Evaluate _c_a_l_l_b_a_c_k each time _q_u_a_n_t_u_m lines are read. The + --CC Evaluate _c_a_l_l_b_a_c_k each time _q_u_a_n_t_u_m lines are read. The --cc option specifies _q_u_a_n_t_u_m. - --cc Specify the number of lines read between each call to + --cc Specify the number of lines read between each call to _c_a_l_l_b_a_c_k. - If --CC is specified without --cc, the default quantum is 5000. + If --CC is specified without --cc, the default quantum is 5000. When _c_a_l_l_b_a_c_k is evaluated, it is supplied the index of the next array element to be assigned and the line to be assigned to that - element as additional arguments. _c_a_l_l_b_a_c_k is evaluated after + element as additional arguments. _c_a_l_l_b_a_c_k is evaluated after the line is read but before the array element is assigned. - If not supplied with an explicit origin, mmaappffiillee will clear + If not supplied with an explicit origin, mmaappffiillee will clear _a_r_r_a_y before assigning to it. - mmaappffiillee returns successfully unless an invalid option or option - argument is supplied, _a_r_r_a_y is invalid or unassignable, or if + mmaappffiillee returns successfully unless an invalid option or option + argument is supplied, _a_r_r_a_y is invalid or unassignable, or if _a_r_r_a_y is not an indexed array. ppooppdd [-nn] [+_n] [-_n] - Removes entries from the directory stack. With no arguments, - removes the top directory from the stack, and performs a ccdd to + Removes entries from the directory stack. With no arguments, + removes the top directory from the stack, and performs a ccdd to the new top directory. Arguments, if supplied, have the follow- ing meanings: - --nn Suppresses the normal change of directory when removing - directories from the stack, so that only the stack is + --nn Suppresses the normal change of directory when removing + directories from the stack, so that only the stack is manipulated. - ++_n Removes the _nth entry counting from the left of the list - shown by ddiirrss, starting with zero. For example: ``popd + ++_n Removes the _nth entry counting from the left of the list + shown by ddiirrss, starting with zero. For example: ``popd +0'' removes the first directory, ``popd +1'' the second. --_n Removes the _nth entry counting from the right of the list - shown by ddiirrss, starting with zero. For example: ``popd - -0'' removes the last directory, ``popd -1'' the next to + shown by ddiirrss, starting with zero. For example: ``popd + -0'' removes the last directory, ``popd -1'' the next to last. - If the ppooppdd command is successful, a ddiirrss is performed as well, - and the return status is 0. ppooppdd returns false if an invalid + If the ppooppdd command is successful, a ddiirrss is performed as well, + and the return status is 0. ppooppdd returns false if an invalid option is encountered, the directory stack is empty, a non-exis- tent directory stack entry is specified, or the directory change fails. pprriinnttff [--vv _v_a_r] _f_o_r_m_a_t [_a_r_g_u_m_e_n_t_s] - Write the formatted _a_r_g_u_m_e_n_t_s to the standard output under the - control of the _f_o_r_m_a_t. The --vv option causes the output to be - assigned to the variable _v_a_r rather than being printed to the + Write the formatted _a_r_g_u_m_e_n_t_s to the standard output under the + control of the _f_o_r_m_a_t. The --vv option causes the output to be + assigned to the variable _v_a_r rather than being printed to the standard output. - The _f_o_r_m_a_t is a character string which contains three types of - objects: plain characters, which are simply copied to standard - output, character escape sequences, which are converted and - copied to the standard output, and format specifications, each - of which causes printing of the next successive _a_r_g_u_m_e_n_t. In + The _f_o_r_m_a_t is a character string which contains three types of + objects: plain characters, which are simply copied to standard + output, character escape sequences, which are converted and + copied to the standard output, and format specifications, each + of which causes printing of the next successive _a_r_g_u_m_e_n_t. In addition to the standard _p_r_i_n_t_f(1) format specifications, pprriinnttff interprets the following extensions: %%bb causes pprriinnttff to expand backslash escape sequences in the corresponding _a_r_g_u_m_e_n_t in the same way as eecchhoo --ee. - %%qq causes pprriinnttff to output the corresponding _a_r_g_u_m_e_n_t in a + %%qq causes pprriinnttff to output the corresponding _a_r_g_u_m_e_n_t in a format that can be reused as shell input. %%((_d_a_t_e_f_m_t))TT - causes pprriinnttff to output the date-time string resulting - from using _d_a_t_e_f_m_t as a format string for _s_t_r_f_t_i_m_e(3). + causes pprriinnttff to output the date-time string resulting + from using _d_a_t_e_f_m_t as a format string for _s_t_r_f_t_i_m_e(3). The corresponding _a_r_g_u_m_e_n_t is an integer representing the - number of seconds since the epoch. Two special argument - values may be used: -1 represents the current time, and - -2 represents the time the shell was invoked. If no - argument is specified, conversion behaves as if -1 had - been given. This is an exception to the usual pprriinnttff + number of seconds since the epoch. Two special argument + values may be used: -1 represents the current time, and + -2 represents the time the shell was invoked. If no + argument is specified, conversion behaves as if -1 had + been given. This is an exception to the usual pprriinnttff behavior. - Arguments to non-string format specifiers are treated as C con- + Arguments to non-string format specifiers are treated as C con- stants, except that a leading plus or minus sign is allowed, and - if the leading character is a single or double quote, the value + if the leading character is a single or double quote, the value is the ASCII value of the following character. - The _f_o_r_m_a_t is reused as necessary to consume all of the _a_r_g_u_- + The _f_o_r_m_a_t is reused as necessary to consume all of the _a_r_g_u_- _m_e_n_t_s. If the _f_o_r_m_a_t requires more _a_r_g_u_m_e_n_t_s than are supplied, - the extra format specifications behave as if a zero value or - null string, as appropriate, had been supplied. The return + the extra format specifications behave as if a zero value or + null string, as appropriate, had been supplied. The return value is zero on success, non-zero on failure. ppuusshhdd [--nn] [+_n] [-_n] ppuusshhdd [--nn] [_d_i_r] - Adds a directory to the top of the directory stack, or rotates - the stack, making the new top of the stack the current working - directory. With no arguments, ppuusshhdd exchanges the top two - directories and returns 0, unless the directory stack is empty. + Adds a directory to the top of the directory stack, or rotates + the stack, making the new top of the stack the current working + directory. With no arguments, ppuusshhdd exchanges the top two + directories and returns 0, unless the directory stack is empty. Arguments, if supplied, have the following meanings: - --nn Suppresses the normal change of directory when rotating - or adding directories to the stack, so that only the + --nn Suppresses the normal change of directory when rotating + or adding directories to the stack, so that only the stack is manipulated. - ++_n Rotates the stack so that the _nth directory (counting - from the left of the list shown by ddiirrss, starting with + ++_n Rotates the stack so that the _nth directory (counting + from the left of the list shown by ddiirrss, starting with zero) is at the top. - --_n Rotates the stack so that the _nth directory (counting - from the right of the list shown by ddiirrss, starting with + --_n Rotates the stack so that the _nth directory (counting + from the right of the list shown by ddiirrss, starting with zero) is at the top. _d_i_r Adds _d_i_r to the directory stack at the top, making it the - new current working directory as if it had been supplied + new current working directory as if it had been supplied as the argument to the ccdd builtin. If the ppuusshhdd command is successful, a ddiirrss is performed as well. - If the first form is used, ppuusshhdd returns 0 unless the cd to _d_i_r - fails. With the second form, ppuusshhdd returns 0 unless the direc- - tory stack is empty, a non-existent directory stack element is - specified, or the directory change to the specified new current + If the first form is used, ppuusshhdd returns 0 unless the cd to _d_i_r + fails. With the second form, ppuusshhdd returns 0 unless the direc- + tory stack is empty, a non-existent directory stack element is + specified, or the directory change to the specified new current directory fails. ppwwdd [--LLPP] - Print the absolute pathname of the current working directory. + Print the absolute pathname of the current working directory. The pathname printed contains no symbolic links if the --PP option is supplied or the --oo pphhyyssiiccaall option to the sseett builtin command - is enabled. If the --LL option is used, the pathname printed may - contain symbolic links. The return status is 0 unless an error - occurs while reading the name of the current directory or an + is enabled. If the --LL option is used, the pathname printed may + contain symbolic links. The return status is 0 unless an error + occurs while reading the name of the current directory or an invalid option is supplied. rreeaadd [--eerrss] [--aa _a_n_a_m_e] [--dd _d_e_l_i_m] [--ii _t_e_x_t] [--nn _n_c_h_a_r_s] [--NN _n_c_h_a_r_s] [--pp _p_r_o_m_p_t] [--tt _t_i_m_e_o_u_t] [--uu _f_d] [_n_a_m_e ...] - One line is read from the standard input, or from the file - descriptor _f_d supplied as an argument to the --uu option, split - into words as described above under WWoorrdd SSpplliittttiinngg, and the + One line is read from the standard input, or from the file + descriptor _f_d supplied as an argument to the --uu option, split + into words as described above under WWoorrdd SSpplliittttiinngg, and the first word is assigned to the first _n_a_m_e, the second word to the second _n_a_m_e, and so on. If there are more words than names, the remaining words and their intervening delimiters are assigned to - the last _n_a_m_e. If there are fewer words read from the input - stream than names, the remaining names are assigned empty val- - ues. The characters in IIFFSS are used to split the line into + the last _n_a_m_e. If there are fewer words read from the input + stream than names, the remaining names are assigned empty val- + ues. The characters in IIFFSS are used to split the line into words using the same rules the shell uses for expansion (described above under WWoorrdd SSpplliittttiinngg). The backslash character (\\) may be used to remove any special meaning for the next char- - acter read and for line continuation. Options, if supplied, + acter read and for line continuation. Options, if supplied, have the following meanings: --aa _a_n_a_m_e The words are assigned to sequential indices of the array @@ -5142,31 +5171,31 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS new values are assigned. Other _n_a_m_e arguments are ignored. --dd _d_e_l_i_m - The first character of _d_e_l_i_m is used to terminate the - input line, rather than newline. If _d_e_l_i_m is the empty - string, rreeaadd will terminate a line when it reads a NUL + The first character of _d_e_l_i_m is used to terminate the + input line, rather than newline. If _d_e_l_i_m is the empty + string, rreeaadd will terminate a line when it reads a NUL character. --ee If the standard input is coming from a terminal, rreeaaddlliinnee - (see RREEAADDLLIINNEE above) is used to obtain the line. Read- - line uses the current (or default, if line editing was - not previously active) editing settings, but uses Read- + (see RREEAADDLLIINNEE above) is used to obtain the line. Read- + line uses the current (or default, if line editing was + not previously active) editing settings, but uses Read- line's default filename completion. --ii _t_e_x_t - If rreeaaddlliinnee is being used to read the line, _t_e_x_t is + If rreeaaddlliinnee is being used to read the line, _t_e_x_t is placed into the editing buffer before editing begins. --nn _n_c_h_a_r_s - rreeaadd returns after reading _n_c_h_a_r_s characters rather than + rreeaadd returns after reading _n_c_h_a_r_s characters rather than waiting for a complete line of input, but honors a delim- - iter if fewer than _n_c_h_a_r_s characters are read before the + iter if fewer than _n_c_h_a_r_s characters are read before the delimiter. --NN _n_c_h_a_r_s - rreeaadd returns after reading exactly _n_c_h_a_r_s characters - rather than waiting for a complete line of input, unless - EOF is encountered or rreeaadd times out. Delimiter charac- - ters encountered in the input are not treated specially - and do not cause rreeaadd to return until _n_c_h_a_r_s characters - are read. The result is not split on the characters in - IIFFSS; the intent is that the variable is assigned exactly + rreeaadd returns after reading exactly _n_c_h_a_r_s characters + rather than waiting for a complete line of input, unless + EOF is encountered or rreeaadd times out. Delimiter charac- + ters encountered in the input are not treated specially + and do not cause rreeaadd to return until _n_c_h_a_r_s characters + are read. The result is not split on the characters in + IIFFSS; the intent is that the variable is assigned exactly the characters read (with the exception of backslash; see the --rr option below). --pp _p_r_o_m_p_t @@ -5174,131 +5203,131 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS line, before attempting to read any input. The prompt is displayed only if input is coming from a terminal. --rr Backslash does not act as an escape character. The back- - slash is considered to be part of the line. In particu- - lar, a backslash-newline pair may not be used as a line + slash is considered to be part of the line. In particu- + lar, a backslash-newline pair may not be used as a line continuation. --ss Silent mode. If input is coming from a terminal, charac- ters are not echoed. --tt _t_i_m_e_o_u_t - Cause rreeaadd to time out and return failure if a complete - line of input (or a specified number of characters) is - not read within _t_i_m_e_o_u_t seconds. _t_i_m_e_o_u_t may be a deci- - mal number with a fractional portion following the deci- - mal point. This option is only effective if rreeaadd is - reading input from a terminal, pipe, or other special - file; it has no effect when reading from regular files. + Cause rreeaadd to time out and return failure if a complete + line of input (or a specified number of characters) is + not read within _t_i_m_e_o_u_t seconds. _t_i_m_e_o_u_t may be a deci- + mal number with a fractional portion following the deci- + mal point. This option is only effective if rreeaadd is + reading input from a terminal, pipe, or other special + file; it has no effect when reading from regular files. If rreeaadd times out, rreeaadd saves any partial input read into - the specified variable _n_a_m_e. If _t_i_m_e_o_u_t is 0, rreeaadd - returns immediately, without trying to read any data. - The exit status is 0 if input is available on the speci- - fied file descriptor, non-zero otherwise. The exit sta- + the specified variable _n_a_m_e. If _t_i_m_e_o_u_t is 0, rreeaadd + returns immediately, without trying to read any data. + The exit status is 0 if input is available on the speci- + fied file descriptor, non-zero otherwise. The exit sta- tus is greater than 128 if the timeout is exceeded. --uu _f_d Read input from file descriptor _f_d. If no _n_a_m_e_s are supplied, the line read is assigned to the vari- - able RREEPPLLYY. The exit status is zero, unless end-of-file is + able RREEPPLLYY. The exit status is zero, unless end-of-file is encountered, rreeaadd times out (in which case the status is greater - than 128), a variable assignment error (such as assigning to a + than 128), a variable assignment error (such as assigning to a readonly variable) occurs, or an invalid file descriptor is sup- plied as the argument to --uu. rreeaaddoonnllyy [--aaAAff] [--pp] [_n_a_m_e[=_w_o_r_d] ...] - The given _n_a_m_e_s are marked readonly; the values of these _n_a_m_e_s - may not be changed by subsequent assignment. If the --ff option - is supplied, the functions corresponding to the _n_a_m_e_s are so - marked. The --aa option restricts the variables to indexed - arrays; the --AA option restricts the variables to associative - arrays. If both options are supplied, --AA takes precedence. If - no _n_a_m_e arguments are given, or if the --pp option is supplied, a + The given _n_a_m_e_s are marked readonly; the values of these _n_a_m_e_s + may not be changed by subsequent assignment. If the --ff option + is supplied, the functions corresponding to the _n_a_m_e_s are so + marked. The --aa option restricts the variables to indexed + arrays; the --AA option restricts the variables to associative + arrays. If both options are supplied, --AA takes precedence. If + no _n_a_m_e arguments are given, or if the --pp option is supplied, a list of all readonly names is printed. The other options may be - used to restrict the output to a subset of the set of readonly - names. The --pp option causes output to be displayed in a format - that may be reused as input. If a variable name is followed by - =_w_o_r_d, the value of the variable is set to _w_o_r_d. The return - status is 0 unless an invalid option is encountered, one of the + used to restrict the output to a subset of the set of readonly + names. The --pp option causes output to be displayed in a format + that may be reused as input. If a variable name is followed by + =_w_o_r_d, the value of the variable is set to _w_o_r_d. The return + status is 0 unless an invalid option is encountered, one of the _n_a_m_e_s is not a valid shell variable name, or --ff is supplied with a _n_a_m_e that is not a function. rreettuurrnn [_n] - Causes a function to stop executing and return the value speci- - fied by _n to its caller. If _n is omitted, the return status is - that of the last command executed in the function body. If - rreettuurrnn is executed by a trap handler, the last command used to - determine the status is the last command executed before the - trap handler. If rreettuurrnn is executed during a DDEEBBUUGG trap, the - last command used to determine the status is the last command - executed by the trap handler before rreettuurrnn was invoked. If - rreettuurrnn is used outside a function, but during execution of a - script by the .. (ssoouurrccee) command, it causes the shell to stop - executing that script and return either _n or the exit status of - the last command executed within the script as the exit status - of the script. If _n is supplied, the return value is its least - significant 8 bits. The return status is non-zero if rreettuurrnn is - supplied a non-numeric argument, or is used outside a function - and not during execution of a script by .. or ssoouurrccee. Any com- - mand associated with the RREETTUURRNN trap is executed before execu- + Causes a function to stop executing and return the value speci- + fied by _n to its caller. If _n is omitted, the return status is + that of the last command executed in the function body. If + rreettuurrnn is executed by a trap handler, the last command used to + determine the status is the last command executed before the + trap handler. If rreettuurrnn is executed during a DDEEBBUUGG trap, the + last command used to determine the status is the last command + executed by the trap handler before rreettuurrnn was invoked. If + rreettuurrnn is used outside a function, but during execution of a + script by the .. (ssoouurrccee) command, it causes the shell to stop + executing that script and return either _n or the exit status of + the last command executed within the script as the exit status + of the script. If _n is supplied, the return value is its least + significant 8 bits. The return status is non-zero if rreettuurrnn is + supplied a non-numeric argument, or is used outside a function + and not during execution of a script by .. or ssoouurrccee. Any com- + mand associated with the RREETTUURRNN trap is executed before execu- tion resumes after the function or script. sseett [----aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [--oo _o_p_t_i_o_n_-_n_a_m_e] [_a_r_g ...] sseett [++aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [++oo _o_p_t_i_o_n_-_n_a_m_e] [_a_r_g ...] - Without options, the name and value of each shell variable are + Without options, the name and value of each shell variable are displayed in a format that can be reused as input for setting or resetting the currently-set variables. Read-only variables can- - not be reset. In _p_o_s_i_x mode, only shell variables are listed. - The output is sorted according to the current locale. When - options are specified, they set or unset shell attributes. Any - arguments remaining after option processing are treated as val- + not be reset. In _p_o_s_i_x _m_o_d_e, only shell variables are listed. + The output is sorted according to the current locale. When + options are specified, they set or unset shell attributes. Any + arguments remaining after option processing are treated as val- ues for the positional parameters and are assigned, in order, to - $$11, $$22, ...... $$_n. Options, if specified, have the following + $$11, $$22, ...... $$_n. Options, if specified, have the following meanings: --aa Each variable or function that is created or modified is - given the export attribute and marked for export to the + given the export attribute and marked for export to the environment of subsequent commands. - --bb Report the status of terminated background jobs immedi- + --bb Report the status of terminated background jobs immedi- ately, rather than before the next primary prompt. This is effective only when job control is enabled. - --ee Exit immediately if a _p_i_p_e_l_i_n_e (which may consist of a - single _s_i_m_p_l_e _c_o_m_m_a_n_d), a _l_i_s_t, or a _c_o_m_p_o_u_n_d _c_o_m_m_a_n_d + --ee Exit immediately if a _p_i_p_e_l_i_n_e (which may consist of a + single _s_i_m_p_l_e _c_o_m_m_a_n_d), a _l_i_s_t, or a _c_o_m_p_o_u_n_d _c_o_m_m_a_n_d (see SSHHEELLLL GGRRAAMMMMAARR above), exits with a non-zero status. - The shell does not exit if the command that fails is - part of the command list immediately following a wwhhiillee - or uunnttiill keyword, part of the test following the iiff or - eelliiff reserved words, part of any command executed in a - &&&& or |||| list except the command following the final &&&& + The shell does not exit if the command that fails is + part of the command list immediately following a wwhhiillee + or uunnttiill keyword, part of the test following the iiff or + eelliiff reserved words, part of any command executed in a + &&&& or |||| list except the command following the final &&&& or ||||, any command in a pipeline but the last, or if the - command's return value is being inverted with !!. If a - compound command other than a subshell returns a non- - zero status because a command failed while --ee was being - ignored, the shell does not exit. A trap on EERRRR, if - set, is executed before the shell exits. This option + command's return value is being inverted with !!. If a + compound command other than a subshell returns a non- + zero status because a command failed while --ee was being + ignored, the shell does not exit. A trap on EERRRR, if + set, is executed before the shell exits. This option applies to the shell environment and each subshell envi- - ronment separately (see CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENNTT + ronment separately (see CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENNTT above), and may cause subshells to exit before executing all the commands in the subshell. - If a compound command or shell function executes in a - context where --ee is being ignored, none of the commands - executed within the compound command or function body - will be affected by the --ee setting, even if --ee is set - and a command returns a failure status. If a compound - command or shell function sets --ee while executing in a - context where --ee is ignored, that setting will not have - any effect until the compound command or the command + If a compound command or shell function executes in a + context where --ee is being ignored, none of the commands + executed within the compound command or function body + will be affected by the --ee setting, even if --ee is set + and a command returns a failure status. If a compound + command or shell function sets --ee while executing in a + context where --ee is ignored, that setting will not have + any effect until the compound command or the command containing the function call completes. --ff Disable pathname expansion. - --hh Remember the location of commands as they are looked up + --hh Remember the location of commands as they are looked up for execution. This is enabled by default. - --kk All arguments in the form of assignment statements are - placed in the environment for a command, not just those + --kk All arguments in the form of assignment statements are + placed in the environment for a command, not just those that precede the command name. - --mm Monitor mode. Job control is enabled. This option is - on by default for interactive shells on systems that - support it (see JJOOBB CCOONNTTRROOLL above). All processes run + --mm Monitor mode. Job control is enabled. This option is + on by default for interactive shells on systems that + support it (see JJOOBB CCOONNTTRROOLL above). All processes run in a separate process group. When a background job com- pletes, the shell prints a line containing its exit sta- tus. --nn Read commands but do not execute them. This may be used - to check a shell script for syntax errors. This is + to check a shell script for syntax errors. This is ignored by interactive shells. --oo _o_p_t_i_o_n_-_n_a_m_e The _o_p_t_i_o_n_-_n_a_m_e can be one of the following: @@ -5306,10 +5335,10 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS Same as --aa. bbrraacceeeexxppaanndd Same as --BB. - eemmaaccss Use an emacs-style command line editing inter- + eemmaaccss Use an emacs-style command line editing inter- face. This is enabled by default when the shell is interactive, unless the shell is started with - the ----nnooeeddiittiinngg option. This also affects the + the ----nnooeeddiittiinngg option. This also affects the editing interface used for rreeaadd --ee. eerrrreexxiitt Same as --ee. eerrrrttrraaccee @@ -5323,8 +5352,8 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS HHIISSTTOORRYY. This option is on by default in inter- active shells. iiggnnoorreeeeooff - The effect is as if the shell command - ``IGNOREEOF=10'' had been executed (see SShheellll + The effect is as if the shell command + ``IGNOREEOF=10'' had been executed (see SShheellll VVaarriiaabblleess above). kkeeyywwoorrdd Same as --kk. mmoonniittoorr Same as --mm. @@ -5339,384 +5368,384 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS pphhyyssiiccaall Same as --PP. ppiippeeffaaiill - If set, the return value of a pipeline is the - value of the last (rightmost) command to exit - with a non-zero status, or zero if all commands - in the pipeline exit successfully. This option + If set, the return value of a pipeline is the + value of the last (rightmost) command to exit + with a non-zero status, or zero if all commands + in the pipeline exit successfully. This option is disabled by default. - ppoossiixx Change the behavior of bbaasshh where the default - operation differs from the POSIX standard to - match the standard (_p_o_s_i_x _m_o_d_e). See SSEEEE AALLSSOO + ppoossiixx Change the behavior of bbaasshh where the default + operation differs from the POSIX standard to + match the standard (_p_o_s_i_x _m_o_d_e). See SSEEEE AALLSSOO below for a reference to a document that details how posix mode affects bash's behavior. pprriivviilleeggeedd Same as --pp. vveerrbboossee Same as --vv. - vvii Use a vi-style command line editing interface. + vvii Use a vi-style command line editing interface. This also affects the editing interface used for rreeaadd --ee. xxttrraaccee Same as --xx. If --oo is supplied with no _o_p_t_i_o_n_-_n_a_m_e, the values of the - current options are printed. If ++oo is supplied with no - _o_p_t_i_o_n_-_n_a_m_e, a series of sseett commands to recreate the - current option settings is displayed on the standard + current options are printed. If ++oo is supplied with no + _o_p_t_i_o_n_-_n_a_m_e, a series of sseett commands to recreate the + current option settings is displayed on the standard output. - --pp Turn on _p_r_i_v_i_l_e_g_e_d mode. In this mode, the $$EENNVV and - $$BBAASSHH__EENNVV files are not processed, shell functions are - not inherited from the environment, and the SSHHEELLLLOOPPTTSS, - BBAASSHHOOPPTTSS, CCDDPPAATTHH, and GGLLOOBBIIGGNNOORREE variables, if they + --pp Turn on _p_r_i_v_i_l_e_g_e_d mode. In this mode, the $$EENNVV and + $$BBAASSHH__EENNVV files are not processed, shell functions are + not inherited from the environment, and the SSHHEELLLLOOPPTTSS, + BBAASSHHOOPPTTSS, CCDDPPAATTHH, and GGLLOOBBIIGGNNOORREE variables, if they appear in the environment, are ignored. If the shell is - started with the effective user (group) id not equal to - the real user (group) id, and the --pp option is not sup- + started with the effective user (group) id not equal to + the real user (group) id, and the --pp option is not sup- plied, these actions are taken and the effective user id - is set to the real user id. If the --pp option is sup- - plied at startup, the effective user id is not reset. - Turning this option off causes the effective user and + is set to the real user id. If the --pp option is sup- + plied at startup, the effective user id is not reset. + Turning this option off causes the effective user and group ids to be set to the real user and group ids. --tt Exit after reading and executing one command. --uu Treat unset variables and parameters other than the spe- - cial parameters "@" and "*" as an error when performing - parameter expansion. If expansion is attempted on an - unset variable or parameter, the shell prints an error - message, and, if not interactive, exits with a non-zero + cial parameters "@" and "*" as an error when performing + parameter expansion. If expansion is attempted on an + unset variable or parameter, the shell prints an error + message, and, if not interactive, exits with a non-zero status. --vv Print shell input lines as they are read. - --xx After expanding each _s_i_m_p_l_e _c_o_m_m_a_n_d, ffoorr command, ccaassee + --xx After expanding each _s_i_m_p_l_e _c_o_m_m_a_n_d, ffoorr command, ccaassee command, sseelleecctt command, or arithmetic ffoorr command, dis- - play the expanded value of PPSS44, followed by the command + play the expanded value of PPSS44, followed by the command and its expanded arguments or associated word list. - --BB The shell performs brace expansion (see BBrraaccee EExxppaannssiioonn + --BB The shell performs brace expansion (see BBrraaccee EExxppaannssiioonn above). This is on by default. - --CC If set, bbaasshh does not overwrite an existing file with - the >>, >>&&, and <<>> redirection operators. This may be + --CC If set, bbaasshh does not overwrite an existing file with + the >>, >>&&, and <<>> redirection operators. This may be overridden when creating output files by using the redi- rection operator >>|| instead of >>. --EE If set, any trap on EERRRR is inherited by shell functions, - command substitutions, and commands executed in a sub- - shell environment. The EERRRR trap is normally not inher- + command substitutions, and commands executed in a sub- + shell environment. The EERRRR trap is normally not inher- ited in such cases. --HH Enable !! style history substitution. This option is on by default when the shell is interactive. - --PP If set, the shell does not resolve symbolic links when - executing commands such as ccdd that change the current + --PP If set, the shell does not resolve symbolic links when + executing commands such as ccdd that change the current working directory. It uses the physical directory structure instead. By default, bbaasshh follows the logical - chain of directories when performing commands which + chain of directories when performing commands which change the current directory. - --TT If set, any traps on DDEEBBUUGG and RREETTUURRNN are inherited by - shell functions, command substitutions, and commands - executed in a subshell environment. The DDEEBBUUGG and + --TT If set, any traps on DDEEBBUUGG and RREETTUURRNN are inherited by + shell functions, command substitutions, and commands + executed in a subshell environment. The DDEEBBUUGG and RREETTUURRNN traps are normally not inherited in such cases. - ---- If no arguments follow this option, then the positional + ---- If no arguments follow this option, then the positional parameters are unset. Otherwise, the positional parame- - ters are set to the _a_r_gs, even if some of them begin + ters are set to the _a_r_gs, even if some of them begin with a --. - -- Signal the end of options, cause all remaining _a_r_gs to + -- Signal the end of options, cause all remaining _a_r_gs to be assigned to the positional parameters. The --xx and --vv options are turned off. If there are no _a_r_gs, the posi- tional parameters remain unchanged. - The options are off by default unless otherwise noted. Using + - rather than - causes these options to be turned off. The - options can also be specified as arguments to an invocation of - the shell. The current set of options may be found in $$--. The + The options are off by default unless otherwise noted. Using + + rather than - causes these options to be turned off. The + options can also be specified as arguments to an invocation of + the shell. The current set of options may be found in $$--. The return status is always true unless an invalid option is encoun- tered. sshhiifftt [_n] - The positional parameters from _n+1 ... are renamed to $$11 ........ - Parameters represented by the numbers $$## down to $$##-_n+1 are - unset. _n must be a non-negative number less than or equal to - $$##. If _n is 0, no parameters are changed. If _n is not given, - it is assumed to be 1. If _n is greater than $$##, the positional - parameters are not changed. The return status is greater than + The positional parameters from _n+1 ... are renamed to $$11 ........ + Parameters represented by the numbers $$## down to $$##-_n+1 are + unset. _n must be a non-negative number less than or equal to + $$##. If _n is 0, no parameters are changed. If _n is not given, + it is assumed to be 1. If _n is greater than $$##, the positional + parameters are not changed. The return status is greater than zero if _n is greater than $$## or less than zero; otherwise 0. sshhoopptt [--ppqqssuu] [--oo] [_o_p_t_n_a_m_e ...] - Toggle the values of settings controlling optional shell behav- - ior. The settings can be either those listed below, or, if the + Toggle the values of settings controlling optional shell behav- + ior. The settings can be either those listed below, or, if the --oo option is used, those available with the --oo option to the sseett builtin command. With no options, or with the --pp option, a list - of all settable options is displayed, with an indication of + of all settable options is displayed, with an indication of whether or not each is set; if _o_p_t_n_a_m_e_s are supplied, the output - is restricted to those options. The --pp option causes output to - be displayed in a form that may be reused as input. Other + is restricted to those options. The --pp option causes output to + be displayed in a form that may be reused as input. Other options have the following meanings: --ss Enable (set) each _o_p_t_n_a_m_e. --uu Disable (unset) each _o_p_t_n_a_m_e. - --qq Suppresses normal output (quiet mode); the return status + --qq Suppresses normal output (quiet mode); the return status indicates whether the _o_p_t_n_a_m_e is set or unset. If multi- - ple _o_p_t_n_a_m_e arguments are given with --qq, the return sta- - tus is zero if all _o_p_t_n_a_m_e_s are enabled; non-zero other- + ple _o_p_t_n_a_m_e arguments are given with --qq, the return sta- + tus is zero if all _o_p_t_n_a_m_e_s are enabled; non-zero other- wise. - --oo Restricts the values of _o_p_t_n_a_m_e to be those defined for + --oo Restricts the values of _o_p_t_n_a_m_e to be those defined for the --oo option to the sseett builtin. - If either --ss or --uu is used with no _o_p_t_n_a_m_e arguments, sshhoopptt - shows only those options which are set or unset, respectively. - Unless otherwise noted, the sshhoopptt options are disabled (unset) + If either --ss or --uu is used with no _o_p_t_n_a_m_e arguments, sshhoopptt + shows only those options which are set or unset, respectively. + Unless otherwise noted, the sshhoopptt options are disabled (unset) by default. - The return status when listing options is zero if all _o_p_t_n_a_m_e_s - are enabled, non-zero otherwise. When setting or unsetting - options, the return status is zero unless an _o_p_t_n_a_m_e is not a + The return status when listing options is zero if all _o_p_t_n_a_m_e_s + are enabled, non-zero otherwise. When setting or unsetting + options, the return status is zero unless an _o_p_t_n_a_m_e is not a valid shell option. The list of sshhoopptt options is: aassssoocc__eexxppaanndd__oonnccee - If set, the shell suppresses multiple evaluation of - associative array subscripts during arithmetic expres- - sion evaluation and while executing builtins that can + If set, the shell suppresses multiple evaluation of + associative array subscripts during arithmetic expres- + sion evaluation and while executing builtins that can perform variable assignments. - aauuttooccdd If set, a command name that is the name of a directory - is executed as if it were the argument to the ccdd com- + aauuttooccdd If set, a command name that is the name of a directory + is executed as if it were the argument to the ccdd com- mand. This option is only used by interactive shells. ccddaabbllee__vvaarrss - If set, an argument to the ccdd builtin command that is - not a directory is assumed to be the name of a variable + If set, an argument to the ccdd builtin command that is + not a directory is assumed to be the name of a variable whose value is the directory to change to. ccddssppeellll If set, minor errors in the spelling of a directory com- - ponent in a ccdd command will be corrected. The errors + ponent in a ccdd command will be corrected. The errors checked for are transposed characters, a missing charac- - ter, and one character too many. If a correction is - found, the corrected filename is printed, and the com- - mand proceeds. This option is only used by interactive + ter, and one character too many. If a correction is + found, the corrected filename is printed, and the com- + mand proceeds. This option is only used by interactive shells. cchheecckkhhaasshh If set, bbaasshh checks that a command found in the hash ta- - ble exists before trying to execute it. If a hashed - command no longer exists, a normal path search is per- + ble exists before trying to execute it. If a hashed + command no longer exists, a normal path search is per- formed. cchheecckkjjoobbss If set, bbaasshh lists the status of any stopped and running - jobs before exiting an interactive shell. If any jobs + jobs before exiting an interactive shell. If any jobs are running, this causes the exit to be deferred until a - second exit is attempted without an intervening command - (see JJOOBB CCOONNTTRROOLL above). The shell always postpones + second exit is attempted without an intervening command + (see JJOOBB CCOONNTTRROOLL above). The shell always postpones exiting if any jobs are stopped. cchheecckkwwiinnssiizzee - If set, bbaasshh checks the window size after each external - (non-builtin) command and, if necessary, updates the + If set, bbaasshh checks the window size after each external + (non-builtin) command and, if necessary, updates the values of LLIINNEESS and CCOOLLUUMMNNSS. - ccmmddhhiisstt If set, bbaasshh attempts to save all lines of a multiple- - line command in the same history entry. This allows - easy re-editing of multi-line commands. This option is - enabled by default, but only has an effect if command + ccmmddhhiisstt If set, bbaasshh attempts to save all lines of a multiple- + line command in the same history entry. This allows + easy re-editing of multi-line commands. This option is + enabled by default, but only has an effect if command history is enabled, as described above under HHIISSTTOORRYY. ccoommppaatt3311 If set, bbaasshh changes its behavior to that of version 3.1 - with respect to quoted arguments to the [[[[ conditional + with respect to quoted arguments to the [[[[ conditional command's ==~~ operator and locale-specific string compar- - ison when using the [[[[ conditional command's << and >> - operators. Bash versions prior to bash-4.1 use ASCII + ison when using the [[[[ conditional command's << and >> + operators. Bash versions prior to bash-4.1 use ASCII collation and _s_t_r_c_m_p(3); bash-4.1 and later use the cur- rent locale's collation sequence and _s_t_r_c_o_l_l(3). ccoommppaatt3322 If set, bbaasshh changes its behavior to that of version 3.2 - with respect to locale-specific string comparison when - using the [[[[ conditional command's << and >> operators - (see previous item) and the effect of interrupting a - command list. Bash versions 3.2 and earlier continue - with the next command in the list after one terminates + with respect to locale-specific string comparison when + using the [[[[ conditional command's << and >> operators + (see previous item) and the effect of interrupting a + command list. Bash versions 3.2 and earlier continue + with the next command in the list after one terminates due to an interrupt. ccoommppaatt4400 If set, bbaasshh changes its behavior to that of version 4.0 - with respect to locale-specific string comparison when - using the [[[[ conditional command's << and >> operators - (see description of ccoommppaatt3311) and the effect of inter- - rupting a command list. Bash versions 4.0 and later - interrupt the list as if the shell received the inter- - rupt; previous versions continue with the next command + with respect to locale-specific string comparison when + using the [[[[ conditional command's << and >> operators + (see description of ccoommppaatt3311) and the effect of inter- + rupting a command list. Bash versions 4.0 and later + interrupt the list as if the shell received the inter- + rupt; previous versions continue with the next command in the list. ccoommppaatt4411 - If set, bbaasshh, when in _p_o_s_i_x mode, treats a single quote - in a double-quoted parameter expansion as a special - character. The single quotes must match (an even num- - ber) and the characters between the single quotes are - considered quoted. This is the behavior of posix mode - through version 4.1. The default bash behavior remains + If set, bbaasshh, when in _p_o_s_i_x _m_o_d_e, treats a single quote + in a double-quoted parameter expansion as a special + character. The single quotes must match (an even num- + ber) and the characters between the single quotes are + considered quoted. This is the behavior of posix mode + through version 4.1. The default bash behavior remains as in previous versions. ccoommppaatt4422 - If set, bbaasshh does not process the replacement string in - the pattern substitution word expansion using quote + If set, bbaasshh does not process the replacement string in + the pattern substitution word expansion using quote removal. ccoommppaatt4433 - If set, bbaasshh does not print a warning message if an - attempt is made to use a quoted compound array assign- - ment as an argument to ddeeccllaarree, makes word expansion - errors non-fatal errors that cause the current command - to fail (the default behavior is to make them fatal + If set, bbaasshh does not print a warning message if an + attempt is made to use a quoted compound array assign- + ment as an argument to ddeeccllaarree, makes word expansion + errors non-fatal errors that cause the current command + to fail (the default behavior is to make them fatal errors that cause the shell to exit), and does not reset - the loop state when a shell function is executed (this - allows bbrreeaakk or ccoonnttiinnuuee in a shell function to affect + the loop state when a shell function is executed (this + allows bbrreeaakk or ccoonnttiinnuuee in a shell function to affect loops in the caller's context). ccoommppaatt4444 - If set, bbaasshh saves the positional parameters to + If set, bbaasshh saves the positional parameters to BASH_ARGV and BASH_ARGC before they are used, regardless of whether or not extended debugging mode is enabled. ccoommpplleettee__ffuullllqquuoottee - If set, bbaasshh quotes all shell metacharacters in file- - names and directory names when performing completion. + If set, bbaasshh quotes all shell metacharacters in file- + names and directory names when performing completion. If not set, bbaasshh removes metacharacters such as the dol- - lar sign from the set of characters that will be quoted - in completed filenames when these metacharacters appear - in shell variable references in words to be completed. - This means that dollar signs in variable names that - expand to directories will not be quoted; however, any - dollar signs appearing in filenames will not be quoted, - either. This is active only when bash is using back- - slashes to quote completed filenames. This variable is - set by default, which is the default bash behavior in + lar sign from the set of characters that will be quoted + in completed filenames when these metacharacters appear + in shell variable references in words to be completed. + This means that dollar signs in variable names that + expand to directories will not be quoted; however, any + dollar signs appearing in filenames will not be quoted, + either. This is active only when bash is using back- + slashes to quote completed filenames. This variable is + set by default, which is the default bash behavior in versions through 4.2. ddiirreexxppaanndd - If set, bbaasshh replaces directory names with the results - of word expansion when performing filename completion. - This changes the contents of the readline editing buf- - fer. If not set, bbaasshh attempts to preserve what the + If set, bbaasshh replaces directory names with the results + of word expansion when performing filename completion. + This changes the contents of the readline editing buf- + fer. If not set, bbaasshh attempts to preserve what the user typed. ddiirrssppeellll - If set, bbaasshh attempts spelling correction on directory - names during word completion if the directory name ini- + If set, bbaasshh attempts spelling correction on directory + names during word completion if the directory name ini- tially supplied does not exist. - ddoottgglloobb If set, bbaasshh includes filenames beginning with a `.' in - the results of pathname expansion. The filenames ````..'''' - and ````....'''' must always be matched explicitly, even if + ddoottgglloobb If set, bbaasshh includes filenames beginning with a `.' in + the results of pathname expansion. The filenames ````..'''' + and ````....'''' must always be matched explicitly, even if ddoottgglloobb is set. eexxeeccffaaiill If set, a non-interactive shell will not exit if it can- - not execute the file specified as an argument to the - eexxeecc builtin command. An interactive shell does not + not execute the file specified as an argument to the + eexxeecc builtin command. An interactive shell does not exit if eexxeecc fails. eexxppaanndd__aalliiaasseess - If set, aliases are expanded as described above under + If set, aliases are expanded as described above under AALLIIAASSEESS. This option is enabled by default for interac- tive shells. eexxttddeebbuugg - If set at shell invocation, arrange to execute the - debugger profile before the shell starts, identical to - the ----ddeebbuuggggeerr option. If set after invocation, behav- + If set at shell invocation, arrange to execute the + debugger profile before the shell starts, identical to + the ----ddeebbuuggggeerr option. If set after invocation, behav- ior intended for use by debuggers is enabled: 11.. The --FF option to the ddeeccllaarree builtin displays the source file name and line number corresponding to each function name supplied as an argument. - 22.. If the command run by the DDEEBBUUGG trap returns a - non-zero value, the next command is skipped and + 22.. If the command run by the DDEEBBUUGG trap returns a + non-zero value, the next command is skipped and not executed. - 33.. If the command run by the DDEEBBUUGG trap returns a - value of 2, and the shell is executing in a sub- - routine (a shell function or a shell script exe- - cuted by the .. or ssoouurrccee builtins), the shell + 33.. If the command run by the DDEEBBUUGG trap returns a + value of 2, and the shell is executing in a sub- + routine (a shell function or a shell script exe- + cuted by the .. or ssoouurrccee builtins), the shell simulates a call to rreettuurrnn. - 44.. BBAASSHH__AARRGGCC and BBAASSHH__AARRGGVV are updated as described + 44.. BBAASSHH__AARRGGCC and BBAASSHH__AARRGGVV are updated as described in their descriptions above. - 55.. Function tracing is enabled: command substitu- + 55.. Function tracing is enabled: command substitu- tion, shell functions, and subshells invoked with (( _c_o_m_m_a_n_d )) inherit the DDEEBBUUGG and RREETTUURRNN traps. - 66.. Error tracing is enabled: command substitution, - shell functions, and subshells invoked with (( + 66.. Error tracing is enabled: command substitution, + shell functions, and subshells invoked with (( _c_o_m_m_a_n_d )) inherit the EERRRR trap. eexxttgglloobb If set, the extended pattern matching features described above under PPaatthhnnaammee EExxppaannssiioonn are enabled. eexxttqquuoottee - If set, $$'_s_t_r_i_n_g' and $$"_s_t_r_i_n_g" quoting is performed - within $${{_p_a_r_a_m_e_t_e_r}} expansions enclosed in double + If set, $$'_s_t_r_i_n_g' and $$"_s_t_r_i_n_g" quoting is performed + within $${{_p_a_r_a_m_e_t_e_r}} expansions enclosed in double quotes. This option is enabled by default. ffaaiillgglloobb - If set, patterns which fail to match filenames during + If set, patterns which fail to match filenames during pathname expansion result in an expansion error. ffoorrccee__ffiiggnnoorree - If set, the suffixes specified by the FFIIGGNNOORREE shell - variable cause words to be ignored when performing word + If set, the suffixes specified by the FFIIGGNNOORREE shell + variable cause words to be ignored when performing word completion even if the ignored words are the only possi- ble completions. See SSHHEELLLL VVAARRIIAABBLLEESS above for a - description of FFIIGGNNOORREE. This option is enabled by + description of FFIIGGNNOORREE. This option is enabled by default. gglloobbaasscciiiirraannggeess - If set, range expressions used in pattern matching - bracket expressions (see PPaatttteerrnn MMaattcchhiinngg above) behave - as if in the traditional C locale when performing com- + If set, range expressions used in pattern matching + bracket expressions (see PPaatttteerrnn MMaattcchhiinngg above) behave + as if in the traditional C locale when performing com- parisons. That is, the current locale's collating - sequence is not taken into account, so bb will not col- - late between AA and BB, and upper-case and lower-case + sequence is not taken into account, so bb will not col- + late between AA and BB, and upper-case and lower-case ASCII characters will collate together. gglloobbssttaarr If set, the pattern **** used in a pathname expansion con- - text will match all files and zero or more directories - and subdirectories. If the pattern is followed by a //, + text will match all files and zero or more directories + and subdirectories. If the pattern is followed by a //, only directories and subdirectories match. ggnnuu__eerrrrffmmtt If set, shell error messages are written in the standard GNU error message format. hhiissttaappppeenndd - If set, the history list is appended to the file named - by the value of the HHIISSTTFFIILLEE variable when the shell + If set, the history list is appended to the file named + by the value of the HHIISSTTFFIILLEE variable when the shell exits, rather than overwriting the file. hhiissttrreeeeddiitt - If set, and rreeaaddlliinnee is being used, a user is given the + If set, and rreeaaddlliinnee is being used, a user is given the opportunity to re-edit a failed history substitution. hhiissttvveerriiffyy - If set, and rreeaaddlliinnee is being used, the results of his- - tory substitution are not immediately passed to the - shell parser. Instead, the resulting line is loaded + If set, and rreeaaddlliinnee is being used, the results of his- + tory substitution are not immediately passed to the + shell parser. Instead, the resulting line is loaded into the rreeaaddlliinnee editing buffer, allowing further modi- fication. hhoossttccoommpplleettee If set, and rreeaaddlliinnee is being used, bbaasshh will attempt to - perform hostname completion when a word containing a @@ - is being completed (see CCoommpplleettiinngg under RREEAADDLLIINNEE + perform hostname completion when a word containing a @@ + is being completed (see CCoommpplleettiinngg under RREEAADDLLIINNEE above). This is enabled by default. hhuuppoonneexxiitt If set, bbaasshh will send SSIIGGHHUUPP to all jobs when an inter- active login shell exits. iinnhheerriitt__eerrrreexxiitt - If set, command substitution inherits the value of the - eerrrreexxiitt option, instead of unsetting it in the subshell - environment. This option is enabled when _p_o_s_i_x _m_o_d_e is + If set, command substitution inherits the value of the + eerrrreexxiitt option, instead of unsetting it in the subshell + environment. This option is enabled when _p_o_s_i_x _m_o_d_e is enabled. iinntteerraaccttiivvee__ccoommmmeennttss If set, allow a word beginning with ## to cause that word - and all remaining characters on that line to be ignored - in an interactive shell (see CCOOMMMMEENNTTSS above). This + and all remaining characters on that line to be ignored + in an interactive shell (see CCOOMMMMEENNTTSS above). This option is enabled by default. llaassttppiippee - If set, and job control is not active, the shell runs + If set, and job control is not active, the shell runs the last command of a pipeline not executed in the back- ground in the current shell environment. - lliitthhiisstt If set, and the ccmmddhhiisstt option is enabled, multi-line + lliitthhiisstt If set, and the ccmmddhhiisstt option is enabled, multi-line commands are saved to the history with embedded newlines rather than using semicolon separators where possible. llooccaallvvaarr__iinnhheerriitt If set, local variables inherit the value and attributes of a variable of the same name that exists at a previous - scope before any new value is assigned. The nameref + scope before any new value is assigned. The nameref attribute is not inherited. llooggiinn__sshheellll - The shell sets this option if it is started as a login - shell (see IINNVVOOCCAATTIIOONN above). The value may not be + The shell sets this option if it is started as a login + shell (see IINNVVOOCCAATTIIOONN above). The value may not be changed. mmaaiillwwaarrnn - If set, and a file that bbaasshh is checking for mail has - been accessed since the last time it was checked, the - message ``The mail in _m_a_i_l_f_i_l_e has been read'' is dis- + If set, and a file that bbaasshh is checking for mail has + been accessed since the last time it was checked, the + message ``The mail in _m_a_i_l_f_i_l_e has been read'' is dis- played. nnoo__eemmppttyy__ccmmdd__ccoommpplleettiioonn - If set, and rreeaaddlliinnee is being used, bbaasshh will not + If set, and rreeaaddlliinnee is being used, bbaasshh will not attempt to search the PPAATTHH for possible completions when completion is attempted on an empty line. nnooccaasseegglloobb - If set, bbaasshh matches filenames in a case-insensitive + If set, bbaasshh matches filenames in a case-insensitive fashion when performing pathname expansion (see PPaatthhnnaammee EExxppaannssiioonn above). nnooccaasseemmaattcchh - If set, bbaasshh matches patterns in a case-insensitive + If set, bbaasshh matches patterns in a case-insensitive fashion when performing matching while executing ccaassee or [[[[ conditional commands, when performing pattern substi- - tution word expansions, or when filtering possible com- + tution word expansions, or when filtering possible com- pletions as part of programmable completion. nnuullllgglloobb - If set, bbaasshh allows patterns which match no files (see - PPaatthhnnaammee EExxppaannssiioonn above) to expand to a null string, + If set, bbaasshh allows patterns which match no files (see + PPaatthhnnaammee EExxppaannssiioonn above) to expand to a null string, rather than themselves. pprrooggccoommpp If set, the programmable completion facilities (see PPrroo-- @@ -5724,50 +5753,50 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS enabled by default. pprroommppttvvaarrss If set, prompt strings undergo parameter expansion, com- - mand substitution, arithmetic expansion, and quote - removal after being expanded as described in PPRROOMMPPTTIINNGG + mand substitution, arithmetic expansion, and quote + removal after being expanded as described in PPRROOMMPPTTIINNGG above. This option is enabled by default. rreessttrriicctteedd__sshheellll - The shell sets this option if it is started in + The shell sets this option if it is started in restricted mode (see RREESSTTRRIICCTTEEDD SSHHEELLLL below). The value - may not be changed. This is not reset when the startup - files are executed, allowing the startup files to dis- + may not be changed. This is not reset when the startup + files are executed, allowing the startup files to dis- cover whether or not a shell is restricted. sshhiifftt__vveerrbboossee - If set, the sshhiifftt builtin prints an error message when + If set, the sshhiifftt builtin prints an error message when the shift count exceeds the number of positional parame- ters. ssoouurrcceeppaatthh If set, the ssoouurrccee (..) builtin uses the value of PPAATTHH to - find the directory containing the file supplied as an + find the directory containing the file supplied as an argument. This option is enabled by default. xxppgg__eecchhoo - If set, the eecchhoo builtin expands backslash-escape + If set, the eecchhoo builtin expands backslash-escape sequences by default. ssuussppeenndd [--ff] - Suspend the execution of this shell until it receives a SSIIGGCCOONNTT + Suspend the execution of this shell until it receives a SSIIGGCCOONNTT signal. A login shell cannot be suspended; the --ff option can be used to override this and force the suspension. The return sta- - tus is 0 unless the shell is a login shell and --ff is not sup- + tus is 0 unless the shell is a login shell and --ff is not sup- plied, or if job control is not enabled. tteesstt _e_x_p_r [[ _e_x_p_r ]] Return a status of 0 (true) or 1 (false) depending on the evalu- ation of the conditional expression _e_x_p_r. Each operator and op- - erand must be a separate argument. Expressions are composed of - the primaries described above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS. - tteesstt does not accept any options, nor does it accept and ignore + erand must be a separate argument. Expressions are composed of + the primaries described above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS. + tteesstt does not accept any options, nor does it accept and ignore an argument of ---- as signifying the end of options. - Expressions may be combined using the following operators, + Expressions may be combined using the following operators, listed in decreasing order of precedence. The evaluation - depends on the number of arguments; see below. Operator prece- + depends on the number of arguments; see below. Operator prece- dence is used when there are five or more arguments. !! _e_x_p_r True if _e_x_p_r is false. (( _e_x_p_r )) - Returns the value of _e_x_p_r. This may be used to override + Returns the value of _e_x_p_r. This may be used to override the normal precedence of operators. _e_x_p_r_1 -aa _e_x_p_r_2 True if both _e_x_p_r_1 and _e_x_p_r_2 are true. @@ -5784,120 +5813,120 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS null. 2 arguments If the first argument is !!, the expression is true if and - only if the second argument is null. If the first argu- - ment is one of the unary conditional operators listed - above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the expression is + only if the second argument is null. If the first argu- + ment is one of the unary conditional operators listed + above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the expression is true if the unary test is true. If the first argument is not a valid unary conditional operator, the expression is false. 3 arguments The following conditions are applied in the order listed. - If the second argument is one of the binary conditional + If the second argument is one of the binary conditional operators listed above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the result of the expression is the result of the binary test - using the first and third arguments as operands. The --aa - and --oo operators are considered binary operators when - there are three arguments. If the first argument is !!, - the value is the negation of the two-argument test using + using the first and third arguments as operands. The --aa + and --oo operators are considered binary operators when + there are three arguments. If the first argument is !!, + the value is the negation of the two-argument test using the second and third arguments. If the first argument is exactly (( and the third argument is exactly )), the result - is the one-argument test of the second argument. Other- + is the one-argument test of the second argument. Other- wise, the expression is false. 4 arguments If the first argument is !!, the result is the negation of - the three-argument expression composed of the remaining + the three-argument expression composed of the remaining arguments. Otherwise, the expression is parsed and eval- - uated according to precedence using the rules listed + uated according to precedence using the rules listed above. 5 or more arguments - The expression is parsed and evaluated according to + The expression is parsed and evaluated according to precedence using the rules listed above. - When used with tteesstt or [[, the << and >> operators sort lexico- + When used with tteesstt or [[, the << and >> operators sort lexico- graphically using ASCII ordering. - ttiimmeess Print the accumulated user and system times for the shell and + ttiimmeess Print the accumulated user and system times for the shell and for processes run from the shell. The return status is 0. ttrraapp [--llpp] [[_a_r_g] _s_i_g_s_p_e_c ...] - The command _a_r_g is to be read and executed when the shell - receives signal(s) _s_i_g_s_p_e_c. If _a_r_g is absent (and there is a - single _s_i_g_s_p_e_c) or --, each specified signal is reset to its - original disposition (the value it had upon entrance to the - shell). If _a_r_g is the null string the signal specified by each - _s_i_g_s_p_e_c is ignored by the shell and by the commands it invokes. - If _a_r_g is not present and --pp has been supplied, then the trap - commands associated with each _s_i_g_s_p_e_c are displayed. If no - arguments are supplied or if only --pp is given, ttrraapp prints the - list of commands associated with each signal. The --ll option - causes the shell to print a list of signal names and their cor- - responding numbers. Each _s_i_g_s_p_e_c is either a signal name - defined in <_s_i_g_n_a_l_._h>, or a signal number. Signal names are + The command _a_r_g is to be read and executed when the shell + receives signal(s) _s_i_g_s_p_e_c. If _a_r_g is absent (and there is a + single _s_i_g_s_p_e_c) or --, each specified signal is reset to its + original disposition (the value it had upon entrance to the + shell). If _a_r_g is the null string the signal specified by each + _s_i_g_s_p_e_c is ignored by the shell and by the commands it invokes. + If _a_r_g is not present and --pp has been supplied, then the trap + commands associated with each _s_i_g_s_p_e_c are displayed. If no + arguments are supplied or if only --pp is given, ttrraapp prints the + list of commands associated with each signal. The --ll option + causes the shell to print a list of signal names and their cor- + responding numbers. Each _s_i_g_s_p_e_c is either a signal name + defined in <_s_i_g_n_a_l_._h>, or a signal number. Signal names are case insensitive and the SSIIGG prefix is optional. - If a _s_i_g_s_p_e_c is EEXXIITT (0) the command _a_r_g is executed on exit - from the shell. If a _s_i_g_s_p_e_c is DDEEBBUUGG, the command _a_r_g is exe- - cuted before every _s_i_m_p_l_e _c_o_m_m_a_n_d, _f_o_r command, _c_a_s_e command, - _s_e_l_e_c_t command, every arithmetic _f_o_r command, and before the - first command executes in a shell function (see SSHHEELLLL GGRRAAMMMMAARR - above). Refer to the description of the eexxttddeebbuugg option to the + If a _s_i_g_s_p_e_c is EEXXIITT (0) the command _a_r_g is executed on exit + from the shell. If a _s_i_g_s_p_e_c is DDEEBBUUGG, the command _a_r_g is exe- + cuted before every _s_i_m_p_l_e _c_o_m_m_a_n_d, _f_o_r command, _c_a_s_e command, + _s_e_l_e_c_t command, every arithmetic _f_o_r command, and before the + first command executes in a shell function (see SSHHEELLLL GGRRAAMMMMAARR + above). Refer to the description of the eexxttddeebbuugg option to the sshhoopptt builtin for details of its effect on the DDEEBBUUGG trap. If a _s_i_g_s_p_e_c is RREETTUURRNN, the command _a_r_g is executed each time a shell function or a script executed with the .. or ssoouurrccee builtins fin- ishes executing. - If a _s_i_g_s_p_e_c is EERRRR, the command _a_r_g is executed whenever a + If a _s_i_g_s_p_e_c is EERRRR, the command _a_r_g is executed whenever a pipeline (which may consist of a single simple command), a list, or a compound command returns a non-zero exit status, subject to - the following conditions. The EERRRR trap is not executed if the + the following conditions. The EERRRR trap is not executed if the failed command is part of the command list immediately following - a wwhhiillee or uunnttiill keyword, part of the test in an _i_f statement, + a wwhhiillee or uunnttiill keyword, part of the test in an _i_f statement, part of a command executed in a &&&& or |||| list except the command - following the final &&&& or ||||, any command in a pipeline but the - last, or if the command's return value is being inverted using - !!. These are the same conditions obeyed by the eerrrreexxiitt (--ee) + following the final &&&& or ||||, any command in a pipeline but the + last, or if the command's return value is being inverted using + !!. These are the same conditions obeyed by the eerrrreexxiitt (--ee) option. - Signals ignored upon entry to the shell cannot be trapped or - reset. Trapped signals that are not being ignored are reset to + Signals ignored upon entry to the shell cannot be trapped or + reset. Trapped signals that are not being ignored are reset to their original values in a subshell or subshell environment when - one is created. The return status is false if any _s_i_g_s_p_e_c is + one is created. The return status is false if any _s_i_g_s_p_e_c is invalid; otherwise ttrraapp returns true. ttyyppee [--aaffttppPP] _n_a_m_e [_n_a_m_e ...] - With no options, indicate how each _n_a_m_e would be interpreted if + With no options, indicate how each _n_a_m_e would be interpreted if used as a command name. If the --tt option is used, ttyyppee prints a - string which is one of _a_l_i_a_s, _k_e_y_w_o_r_d, _f_u_n_c_t_i_o_n, _b_u_i_l_t_i_n, or - _f_i_l_e if _n_a_m_e is an alias, shell reserved word, function, - builtin, or disk file, respectively. If the _n_a_m_e is not found, - then nothing is printed, and an exit status of false is - returned. If the --pp option is used, ttyyppee either returns the + string which is one of _a_l_i_a_s, _k_e_y_w_o_r_d, _f_u_n_c_t_i_o_n, _b_u_i_l_t_i_n, or + _f_i_l_e if _n_a_m_e is an alias, shell reserved word, function, + builtin, or disk file, respectively. If the _n_a_m_e is not found, + then nothing is printed, and an exit status of false is + returned. If the --pp option is used, ttyyppee either returns the name of the disk file that would be executed if _n_a_m_e were speci- fied as a command name, or nothing if ``type -t name'' would not - return _f_i_l_e. The --PP option forces a PPAATTHH search for each _n_a_m_e, + return _f_i_l_e. The --PP option forces a PPAATTHH search for each _n_a_m_e, even if ``type -t name'' would not return _f_i_l_e. If a command is hashed, --pp and --PP print the hashed value, which is not necessar- - ily the file that appears first in PPAATTHH. If the --aa option is - used, ttyyppee prints all of the places that contain an executable + ily the file that appears first in PPAATTHH. If the --aa option is + used, ttyyppee prints all of the places that contain an executable named _n_a_m_e. This includes aliases and functions, if and only if the --pp option is not also used. The table of hashed commands is - not consulted when using --aa. The --ff option suppresses shell + not consulted when using --aa. The --ff option suppresses shell function lookup, as with the ccoommmmaanndd builtin. ttyyppee returns true if all of the arguments are found, false if any are not found. uulliimmiitt [--HHSSaabbccddeeffiikkllmmnnppqqrrssttuuvvxxPPTT [_l_i_m_i_t]] - Provides control over the resources available to the shell and - to processes started by it, on systems that allow such control. + Provides control over the resources available to the shell and + to processes started by it, on systems that allow such control. The --HH and --SS options specify that the hard or soft limit is set - for the given resource. A hard limit cannot be increased by a - non-root user once it is set; a soft limit may be increased up - to the value of the hard limit. If neither --HH nor --SS is speci- + for the given resource. A hard limit cannot be increased by a + non-root user once it is set; a soft limit may be increased up + to the value of the hard limit. If neither --HH nor --SS is speci- fied, both the soft and hard limits are set. The value of _l_i_m_i_t can be a number in the unit specified for the resource or one of the special values hhaarrdd, ssoofftt, or uunnlliimmiitteedd, which stand for the - current hard limit, the current soft limit, and no limit, - respectively. If _l_i_m_i_t is omitted, the current value of the - soft limit of the resource is printed, unless the --HH option is + current hard limit, the current soft limit, and no limit, + respectively. If _l_i_m_i_t is omitted, the current value of the + soft limit of the resource is printed, unless the --HH option is given. When more than one resource is specified, the limit name and unit are printed before the value. Other options are inter- preted as follows: @@ -5906,12 +5935,12 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS --cc The maximum size of core files created --dd The maximum size of a process's data segment --ee The maximum scheduling priority ("nice") - --ff The maximum size of files written by the shell and its + --ff The maximum size of files written by the shell and its children --ii The maximum number of pending signals --kk The maximum number of kqueues that may be allocated --ll The maximum size that may be locked into memory - --mm The maximum resident set size (many systems do not honor + --mm The maximum resident set size (many systems do not honor this limit) --nn The maximum number of open file descriptors (most systems do not allow this value to be set) @@ -5920,53 +5949,53 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS --rr The maximum real-time scheduling priority --ss The maximum stack size --tt The maximum amount of cpu time in seconds - --uu The maximum number of processes available to a single + --uu The maximum number of processes available to a single user - --vv The maximum amount of virtual memory available to the + --vv The maximum amount of virtual memory available to the shell and, on some systems, to its children --xx The maximum number of file locks --PP The maximum number of pseudoterminals --TT The maximum number of threads - If _l_i_m_i_t is given, and the --aa option is not used, _l_i_m_i_t is the - new value of the specified resource. If no option is given, - then --ff is assumed. Values are in 1024-byte increments, except - for --tt, which is in seconds; --pp, which is in units of 512-byte - blocks; --PP, --TT, --bb, --kk, --nn, and --uu, which are unscaled values; - and, when in Posix mode, --cc and --ff, which are in 512-byte incre- + If _l_i_m_i_t is given, and the --aa option is not used, _l_i_m_i_t is the + new value of the specified resource. If no option is given, + then --ff is assumed. Values are in 1024-byte increments, except + for --tt, which is in seconds; --pp, which is in units of 512-byte + blocks; --PP, --TT, --bb, --kk, --nn, and --uu, which are unscaled values; + and, when in posix mode, --cc and --ff, which are in 512-byte incre- ments. The return status is 0 unless an invalid option or argu- ment is supplied, or an error occurs while setting a new limit. uummaasskk [--pp] [--SS] [_m_o_d_e] The user file-creation mask is set to _m_o_d_e. If _m_o_d_e begins with - a digit, it is interpreted as an octal number; otherwise it is - interpreted as a symbolic mode mask similar to that accepted by - _c_h_m_o_d(1). If _m_o_d_e is omitted, the current value of the mask is - printed. The --SS option causes the mask to be printed in sym- - bolic form; the default output is an octal number. If the --pp + a digit, it is interpreted as an octal number; otherwise it is + interpreted as a symbolic mode mask similar to that accepted by + _c_h_m_o_d(1). If _m_o_d_e is omitted, the current value of the mask is + printed. The --SS option causes the mask to be printed in sym- + bolic form; the default output is an octal number. If the --pp option is supplied, and _m_o_d_e is omitted, the output is in a form that may be reused as input. The return status is 0 if the mode - was successfully changed or if no _m_o_d_e argument was supplied, + was successfully changed or if no _m_o_d_e argument was supplied, and false otherwise. uunnaalliiaass [-aa] [_n_a_m_e ...] - Remove each _n_a_m_e from the list of defined aliases. If --aa is - supplied, all alias definitions are removed. The return value + Remove each _n_a_m_e from the list of defined aliases. If --aa is + supplied, all alias definitions are removed. The return value is true unless a supplied _n_a_m_e is not a defined alias. uunnsseett [-ffvv] [-nn] [_n_a_m_e ...] - For each _n_a_m_e, remove the corresponding variable or function. + For each _n_a_m_e, remove the corresponding variable or function. If the --vv option is given, each _n_a_m_e refers to a shell variable, - and that variable is removed. Read-only variables may not be - unset. If --ff is specified, each _n_a_m_e refers to a shell func- - tion, and the function definition is removed. If the --nn option - is supplied, and _n_a_m_e is a variable with the _n_a_m_e_r_e_f attribute, - _n_a_m_e will be unset rather than the variable it references. --nn - has no effect if the --ff option is supplied. If no options are - supplied, each _n_a_m_e refers to a variable; if there is no vari- - able by that name, any function with that name is unset. Each - unset variable or function is removed from the environment - passed to subsequent commands. If any of CCOOMMPP__WWOORRDDBBRREEAAKKSS, RRAANN-- + and that variable is removed. Read-only variables may not be + unset. If --ff is specified, each _n_a_m_e refers to a shell func- + tion, and the function definition is removed. If the --nn option + is supplied, and _n_a_m_e is a variable with the _n_a_m_e_r_e_f attribute, + _n_a_m_e will be unset rather than the variable it references. --nn + has no effect if the --ff option is supplied. If no options are + supplied, each _n_a_m_e refers to a variable; if there is no vari- + able by that name, any function with that name is unset. Each + unset variable or function is removed from the environment + passed to subsequent commands. If any of CCOOMMPP__WWOORRDDBBRREEAAKKSS, RRAANN-- DDOOMM, SSEECCOONNDDSS, LLIINNEENNOO, HHIISSTTCCMMDD, FFUUNNCCNNAAMMEE, GGRROOUUPPSS, or DDIIRRSSTTAACCKK are unset, they lose their special properties, even if they are sub- sequently reset. The exit status is true unless a _n_a_m_e is read- @@ -5974,23 +6003,23 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS wwaaiitt [--ffnn] [_i_d _._._.] Wait for each specified child process and return its termination - status. Each _i_d may be a process ID or a job specification; if - a job spec is given, all processes in that job's pipeline are + status. Each _i_d may be a process ID or a job specification; if + a job spec is given, all processes in that job's pipeline are waited for. If _i_d is not given, all currently active child pro- cesses are waited for, and the return status is zero. If the --nn - option is supplied, wwaaiitt waits for any job to terminate and - returns its exit status. If the --ff option is supplied, and job + option is supplied, wwaaiitt waits for any job to terminate and + returns its exit status. If the --ff option is supplied, and job control is enabled, wwaaiitt forces _i_d to terminate before returning - its status, instead of returning when it changes status. If _i_d - specifies a non-existent process or job, the return status is - 127. Otherwise, the return status is the exit status of the + its status, instead of returning when it changes status. If _i_d + specifies a non-existent process or job, the return status is + 127. Otherwise, the return status is the exit status of the last process or job waited for. RREESSTTRRIICCTTEEDD SSHHEELLLL If bbaasshh is started with the name rrbbaasshh, or the --rr option is supplied at - invocation, the shell becomes restricted. A restricted shell is used - to set up an environment more controlled than the standard shell. It - behaves identically to bbaasshh with the exception that the following are + invocation, the shell becomes restricted. A restricted shell is used + to set up an environment more controlled than the standard shell. It + behaves identically to bbaasshh with the exception that the following are disallowed or not performed: +o changing directories with ccdd @@ -5999,16 +6028,16 @@ RREESSTTRRIICCTTEEDD SSHHEELLLL +o specifying command names containing // - +o specifying a filename containing a // as an argument to the .. + +o specifying a filename containing a // as an argument to the .. builtin command - +o specifying a filename containing a slash as an argument to the + +o specifying a filename containing a slash as an argument to the --pp option to the hhaasshh builtin command - +o importing function definitions from the shell environment at + +o importing function definitions from the shell environment at startup - +o parsing the value of SSHHEELLLLOOPPTTSS from the shell environment at + +o parsing the value of SSHHEELLLLOOPPTTSS from the shell environment at startup +o redirecting output using the >, >|, <>, >&, &>, and >> redirect- @@ -6017,10 +6046,10 @@ RREESSTTRRIICCTTEEDD SSHHEELLLL +o using the eexxeecc builtin command to replace the shell with another command - +o adding or deleting builtin commands with the --ff and --dd options + +o adding or deleting builtin commands with the --ff and --dd options to the eennaabbllee builtin command - +o using the eennaabbllee builtin command to enable disabled shell + +o using the eennaabbllee builtin command to enable disabled shell builtins +o specifying the --pp option to the ccoommmmaanndd builtin command @@ -6030,14 +6059,14 @@ RREESSTTRRIICCTTEEDD SSHHEELLLL These restrictions are enforced after any startup files are read. When a command that is found to be a shell script is executed (see CCOOMM-- - MMAANNDD EEXXEECCUUTTIIOONN above), rrbbaasshh turns off any restrictions in the shell + MMAANNDD EEXXEECCUUTTIIOONN above), rrbbaasshh turns off any restrictions in the shell spawned to execute the script. SSEEEE AALLSSOO _B_a_s_h _R_e_f_e_r_e_n_c_e _M_a_n_u_a_l, Brian Fox and Chet Ramey _T_h_e _G_n_u _R_e_a_d_l_i_n_e _L_i_b_r_a_r_y, Brian Fox and Chet Ramey _T_h_e _G_n_u _H_i_s_t_o_r_y _L_i_b_r_a_r_y, Brian Fox and Chet Ramey - _P_o_r_t_a_b_l_e _O_p_e_r_a_t_i_n_g _S_y_s_t_e_m _I_n_t_e_r_f_a_c_e _(_P_O_S_I_X_) _P_a_r_t _2_: _S_h_e_l_l _a_n_d _U_t_i_l_i_- + _P_o_r_t_a_b_l_e _O_p_e_r_a_t_i_n_g _S_y_s_t_e_m _I_n_t_e_r_f_a_c_e _(_P_O_S_I_X_) _P_a_r_t _2_: _S_h_e_l_l _a_n_d _U_t_i_l_i_- _t_i_e_s, IEEE -- http://pubs.opengroup.org/onlinepubs/9699919799/ http://tiswww.case.edu/~chet/bash/POSIX -- a description of posix mode @@ -6055,7 +6084,7 @@ FFIILLEESS _~_/_._b_a_s_h_r_c The individual per-interactive-shell startup file _~_/_._b_a_s_h___l_o_g_o_u_t - The individual login shell cleanup file, executed when a login + The individual login shell cleanup file, executed when a login shell exits _~_/_._i_n_p_u_t_r_c Individual _r_e_a_d_l_i_n_e initialization file @@ -6069,14 +6098,14 @@ AAUUTTHHOORRSS BBUUGG RREEPPOORRTTSS If you find a bug in bbaasshh,, you should report it. But first, you should - make sure that it really is a bug, and that it appears in the latest - version of bbaasshh. The latest version is always available from + make sure that it really is a bug, and that it appears in the latest + version of bbaasshh. The latest version is always available from _f_t_p_:_/_/_f_t_p_._g_n_u_._o_r_g_/_p_u_b_/_g_n_u_/_b_a_s_h_/. - Once you have determined that a bug actually exists, use the _b_a_s_h_b_u_g - command to submit a bug report. If you have a fix, you are encouraged - to mail that as well! Suggestions and `philosophical' bug reports may - be mailed to _b_u_g_-_b_a_s_h_@_g_n_u_._o_r_g or posted to the Usenet newsgroup + Once you have determined that a bug actually exists, use the _b_a_s_h_b_u_g + command to submit a bug report. If you have a fix, you are encouraged + to mail that as well! Suggestions and `philosophical' bug reports may + be mailed to _b_u_g_-_b_a_s_h_@_g_n_u_._o_r_g or posted to the Usenet newsgroup ggnnuu..bbaasshh..bbuugg. ALL bug reports should include: @@ -6087,7 +6116,7 @@ BBUUGG RREEPPOORRTTSS A description of the bug behaviour A short script or `recipe' which exercises the bug - _b_a_s_h_b_u_g inserts the first three items automatically into the template + _b_a_s_h_b_u_g inserts the first three items automatically into the template it provides for filing a bug report. Comments and bug reports concerning this manual page should be directed @@ -6104,10 +6133,10 @@ BBUUGGSS Shell builtin commands and functions are not stoppable/restartable. Compound commands and command sequences of the form `a ; b ; c' are not - handled gracefully when process suspension is attempted. When a - process is stopped, the shell immediately executes the next command in - the sequence. It suffices to place the sequence of commands between - parentheses to force it into a subshell, which may be stopped as a + handled gracefully when process suspension is attempted. When a + process is stopped, the shell immediately executes the next command in + the sequence. It suffices to place the sequence of commands between + parentheses to force it into a subshell, which may be stopped as a unit. Array variables may not (yet) be exported. @@ -6116,4 +6145,4 @@ BBUUGGSS -GNU Bash 5.0 2018 March 15 BASH(1) +GNU Bash 5.0 2018 August 7 BASH(1) |