path: root/lib/am/distdir.am

## automake - create Makefile.in from Makefile.am
## Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
## 2010 Free Software Foundation, Inc.

## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2, or (at your option)
## any later version.

## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.

## You should have received a copy of the GNU General Public License
## along with this program.  If not, see <http://www.gnu.org/licenses/>.

## DIST_COMMON comes first so that README can be the very first file.
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

if %?TOPDIR_P%
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

am__remove_distdir = \
  { test ! -d "$(distdir)" \
    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr "$(distdir)"; }; }
am__post_remove_distdir = $(am__remove_distdir)
endif %?TOPDIR_P%

if %?SUBDIRS%
## computes a relative pathname RELDIR such that DIR1/RELDIR = DIR2.
## Input:
## - DIR1            relative pathname, relative to the current directory
## - DIR2            relative pathname, relative to the current directory
## Output:
## - reldir          relative pathname of DIR2, relative to DIR1
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
endif %?SUBDIRS%

.PHONY: distdir
if %?SUBDIRS%
AM_RECURSIVE_TARGETS += distdir
endif %?SUBDIRS%

distdir: $(DISTFILES)
##
## For Gnits users, this is pretty handy.  Look at 15 lines
## in case some explanatory text is desirable.
##
if %?TOPDIR_P%
if  %?CK-NEWS%
	@case `sed 15q $(srcdir)/NEWS` in \
	*"$(VERSION)"*) : ;; \
	*) \
	  echo "NEWS not updated; not releasing" 1>&2; \
	  exit 1;; \
	esac
endif  %?CK-NEWS%
endif %?TOPDIR_P%
##
## `missing help2man' may have created some bogus man pages.  Ensure they
## are not distributed.
##
if %?INSTALL-MAN%
if %?HAVE-MANS%
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
## Note that we check existing man pages here only.  If there are man pages
## which are not distributed, and may be generated only conditionally, then
## we should not error out because of them.  This could be refined to take
## into account only dist_*_MANS, but then we'd be missing out on those
## the user distributes with EXTRA_DIST.
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
endif %?HAVE-MANS%
endif %?INSTALL-MAN%
##
## Only for the top dir.
##
if %?TOPDIR_P%
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
endif %?TOPDIR_P%
##
##
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
##
## Yet another hack to support SUN make.
##
## Let's assume `foo' appears in DISTFILES and is not a built file.
## When building with VPATH=$(srcdir), SUN make and OSF1/Tru64 will
## rewrite `foo' as `$(srcdir)/foo'.  An attempt to install the file
## with
##    cp $file $(distdir)/$file
## will thus install $(srcdir)/foo as $(distdir)/$(srcdir)/foo
## instead of $(distdir)/foo.
##
## So let's strip this leading $(srcdir)/ when it exists.  (As far we
## know, only SUN make and OSF1/Tru64 make add it.)  Searching whether
## the file is to be found in the source or build directory will be
## done later.
##
## In case we are _not_ using SUN or OSF1/Tru64 make, how can we be sure
## we are not stripping a legitimate filename that starts with the
## same pattern as $(srcdir)?
## Well, it can't happen without the Makefile author distributing
## something out of the distribution (which is bad).  As an example,
## consider `EXTRA_DIST = ../bar'.  This is an issue if $srcdir is `..',
## however getting this value for srcdir is impossible: `EXTRA_DIST = ../bar'
## implies we are in a subdirectory (so `../bar' is within the package),
## hence `$srcdir' is something like `../../subdir'.
##
## There is more to say about files which are above the current directory,
## like `../bar' in the previous example.  The OSF1/Tru64 make
## implementation can simplify filenames resulting from a VPATH lookup.
## For instance if `VPATH = ../../subdir' and `../bar' is found in that
## VPATH directory, then occurrences of `../bar' will be replaced by
## `../../bar' (instead of `../../subdir/../bar').  This obviously defeats
## any attempt to strip a leading $srcdir.  Presently we have no workaround
## for this.  We avoid this issue by writing `EXTRA_DIST = $(srcdir)/../bar'
## instead of `EXTRA_DIST = ../bar'.  This prefixing is needed only for files
## above the current directory.  Fortunately, apart from auxdir files which
## can be located in .. or ../.., this situation hardly occurs in practice.
##
## Also rewrite $(top_srcdir) (which sometimes appears in DISTFILES, and can
## be absolute) by $(top_builddir) (which is always relative).  $(srcdir) will
## be prepended later.
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
## (The second `t' command clears the flag for the next round.)
##
## Make the subdirectories for the files.
##
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
##
##
	for file in $$dist_files; do \
##
## Always look for the file in the build directory first.  That way
## for something like yacc output we will correctly pick up the latest
## version.  Also check for directories in the build directory first,
## so one can ship generated directories.
##
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
##
## Use cp, not ln.  There are situations in which "ln" can fail.  For
## instance a file to distribute could actually be a cross-filesystem
## symlink -- this can easily happen if "gettextize" was run on the
## distribution.
##
	  if test -d $$d/$$file; then \
## Don't mention $$file in the destination argument, since this fails if
## the destination directory already exists.  Also, use `-R' and not `-r'.
## `-r' is almost always incorrect.
##
## If a directory exists both in `.' and $(srcdir), then
## We copy the files from $(srcdir) first and then install those from
## `.'.  This can help people who distribute directories made of
## source files _and_ generated files.  It is also important when the
## directory exists only in $(srcdir), because some vendor Make (such
## as Tru64) will magically create an empty directory in `.'
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
## If the destination directory already exists, it may contain read-only
## files, e.g., during `make distcheck'.
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
## Test for file existence because sometimes a file gets included in
## DISTFILES twice.  For example this happens when a single source
## file is used in building more than one program.
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
##
## Test for directory existence here because previous automake
## invocation might have created some directories.  Note that we
## explicitly set distdir for the subdir make; that lets us mix-n-match
## many automake-using packages into one large package, and have "dist"
## at the top level do the right thing.  If we're in the topmost
## directory, then we use `distdir' instead of `top_distdir'; this lets
## us work correctly with an enclosing package.
##
## Split the loop for the directory creation and the one for recursion,
## so that with GNU make -n, only the latter is executed.
if %?SUBDIRS%
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
## Disable am__remove_distdir so that sub-packages do not clear a
## directory we have already cleared and might even have populated
## (e.g. shared AUX dir in the sub-package).
		am__remove_distdir=: \
## Disable filename length check:
		am__skip_length_check=: \
## No need to fix modes more than once:
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
endif %?SUBDIRS%
##
## We might have to perform some last second updates, such as updating
## info files.
## We must explicitly set distdir and top_distdir for these sub-makes.
##
if %?DIST-TARGETS%
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  %DIST-TARGETS%
endif %?DIST-TARGETS%
##
## This complex find command will try to avoid changing the modes of
## links into the source tree, in case they're hard-linked.
##
## Ignore return result from chmod, because it might give an error
## if we chmod a symlink.
##
## Another nastiness: if the file is unreadable by us, we make it
## readable regardless of the number of links to it.  This only
## happens in perverse cases.
##
## We use $(install_sh) because that is a known-portable way to modify
## the file in place in the source tree.
##
## If we are being invoked recursively, then there is no need to walk
## the whole subtree again.  This is a complexity reduction for a deep
## hierarchy of subpackages.
##
if %?TOPDIR_P%
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
if %?FILENAME_FILTER%
	@if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f -print | \
	  grep '^%FILENAME_FILTER%' 1>&2; then \
	  echo 'error: the above filenames are too long' 1>&2; \
	  exit 1; \
	else :; fi
endif %?FILENAME_FILTER%
endif %?TOPDIR_P%



## --------------------------------------- ##
## Building various distribution flavors.  ##
## --------------------------------------- ##

## Note that we don't use GNU tar's `-z' option.  One reason (but not
## the only reason) is that some versions of tar (e.g., OSF1)
## interpret `-z' differently.
##
## The -o option of GNU tar used to exclude empty directories.  This
## behavior was fixed in tar 1.12 (released on 1997-04-25).  But older
## versions of tar are still used (for instance NetBSD 1.6.1 ships
## with tar 1.11.2).  We do not do anything specific w.r.t. this
## incompatibility since packages where empty directories need to be
## present in the archive are really unusual.
##
## We order DIST_TARGETS by expected duration of the compressors,
## slowest first, for better parallelism in `make dist'.  Do not
## reorder DIST_ARCHIVES, users may expect gzip to be first.

if %?TOPDIR_P%

?GZIP?DIST_ARCHIVES += $(distdir).tar.gz
GZIP_ENV = --best
.PHONY: dist-gzip
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

?BZIP2?DIST_ARCHIVES += $(distdir).tar.bz2
.PHONY: dist-bzip2
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

?LZIP?DIST_ARCHIVES += $(distdir).tar.lz
.PHONY: dist-lzip
dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -9 -c >$(distdir).tar.lz
	$(am__post_remove_distdir)

?LZMA?DIST_ARCHIVES += $(distdir).tar.lzma
.PHONY: dist-lzma
dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__post_remove_distdir)

?XZ?DIST_ARCHIVES += $(distdir).tar.xz
.PHONY: dist-xz
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--9} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

?COMPRESS?DIST_ARCHIVES += $(distdir).tar.Z
.PHONY: dist-tarZ
dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

?SHAR?DIST_ARCHIVES += $(distdir).shar.gz
.PHONY: dist-shar
dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

?ZIP?DIST_ARCHIVES += $(distdir).zip
.PHONY: dist-zip
dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

?LZMA?DIST_TARGETS += dist-lzma
?LZIP?DIST_TARGETS += dist-lzip
?XZ?DIST_TARGETS += dist-xz
?SHAR?DIST_TARGETS += dist-shar
?BZIP2?DIST_TARGETS += dist-bzip2
?GZIP?DIST_TARGETS += dist-gzip
?ZIP?DIST_TARGETS += dist-zip
?COMPRESS?DIST_TARGETS += dist-tarZ

endif %?TOPDIR_P%



## ------------------------------------------------- ##
## Building all the requested distribution flavors.  ##
## ------------------------------------------------- ##

## Currently we cannot use if/endif inside a rule.  The file_contents
## parser needs work.

if %?TOPDIR_P%

.PHONY: dist dist-all
if %?SUBDIRS%
AM_RECURSIVE_TARGETS += dist dist-all
endif %?SUBDIRS%

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

endif %?TOPDIR_P%


## ------------------------- ##
## Checking a distribution.  ##
## ------------------------- ##


if %?TOPDIR_P%
if %?SUBDIRS%
AM_RECURSIVE_TARGETS += distcheck
endif %?SUBDIRS%

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
.PHONY: distcheck
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
## Make the new source tree read-only.  Distributions ought to work in
## this case.  However, make the top-level directory writable so we
## can make our new subdirs.
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
## Undo the write access.
	chmod a-w $(distdir)
## With GNU make, the following command will be executed even with `make -n',
## due to the presence of `$(MAKE)'.  That is normally all well (and `$(MAKE)'
## is necessary for things like parallel distcheck), but here we don't want
## execution.  To avoid MAKEFLAGS parsing hassles, use a witness file that a
## non-`-n' run would have just created.
	test -d $(distdir)/_build || exit 0; \
## Compute the absolute path of `_inst'.  Strip any leading DOS drive
## to allow DESTDIR installations.  Otherwise "$(DESTDIR)$(prefix)" would
## expand to "c:/temp/am-dc-5668/c:/src/package/package-1.0/_inst".
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
## We will attempt a DESTDIR install in $dc_destdir.  We don't
## create this directory under $dc_install_base, because it would
## create very long directory names.
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
?DISTCHECK-HOOK?	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
## Parallel BSD make may not start a new shell for each command in a recipe,
## so be sure to `cd' back to the original directory after this.
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
?GETTEXT?	    --with-included-gettext \
## Additional flags for configure.  Keep this last in the configure
## invocation so the user can override previous options.
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
## Make sure the package has proper DESTDIR support (we could not test this
## in the previous install/installcheck/uninstall test, because it's reasonable
## for installcheck to fail in a DESTDIR install).
## We make the `$dc_install_base' read-only because this is where files
## with missing DESTDIR support are likely to be installed.
	  && chmod -R a-w "$$dc_install_base" \
## The logic here is quite convoluted because we must clean $dc_destdir
## whatever happens (it won't be erased by the next run of distcheck like
## $(distdir) is).
	  && ({ \
## Build the directory, so we can cd into it even if `make install'
## didn't create it.  Use mkdir, not $(MKDIR_P) because we want to
## fail if the directory already exists (PR/413).
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
## Make sure to remove the dists we created in the test build directory.
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
## Cater to parallel BSD make (see above).
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

## Define distuninstallcheck_listfiles and distuninstallcheck separately
## from distcheck, so that they can be overridden by the user.
.PHONY: distuninstallcheck
distuninstallcheck_listfiles = find . -type f -print
distuninstallcheck:
## We use -le 1 because the `dir' file (created by install-info)
## might still exist after uninstall.
	@$(am__cd) '$(distuninstallcheck_dir)' \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2

## Define distcleancheck_listfiles and distcleancheck separately
## from distcheck, so that they can be overridden by the user.
.PHONY: distcleancheck
distcleancheck_listfiles = find . -type f -print
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
endif %?TOPDIR_P%