diff options
Diffstat (limited to 'APACHE_1_3_42/conf/httpd.conf-dist-nw')
| -rw-r--r-- | APACHE_1_3_42/conf/httpd.conf-dist-nw | 901 |
1 files changed, 901 insertions, 0 deletions
diff --git a/APACHE_1_3_42/conf/httpd.conf-dist-nw b/APACHE_1_3_42/conf/httpd.conf-dist-nw new file mode 100644 index 0000000000..586b8b544e --- /dev/null +++ b/APACHE_1_3_42/conf/httpd.conf-dist-nw @@ -0,0 +1,901 @@ +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See <URL:http://httpd.apache.org/docs/> for detailed information about +# the directives. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# After this file is processed, the server will look for and process +# sys:/apache/conf/srm.conf and then sys:/apache/conf/access.conf +# unless you have overridden these with ResourceConfig and/or +# AccessConfig directives here. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32 and +# sys:/ for NetWare), the server will use that explicit path. If the +# filenames do *not* begin with "/", the value of ServerRoot is prepended +# -- so "logs/foo.log" with ServerRoot set to "/usr/local/apache" will be +# interpreted by the server as "/usr/local/apache/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# ServerType is either inetd, or standalone. Inetd mode is only supported on +# Unix platforms. +# +ServerType standalone + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation +# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); +# you will save yourself a lot of trouble. +# +ServerRoot "sys:/apache" + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +PidFile logs/httpd.pid + +# +# ScoreBoardFile: File used to store internal server process information. +# Not all architectures require this. But if yours does (you'll know because +# this file will be created when you run Apache) then you *must* ensure that +# no two invocations of Apache share the same scoreboard file. +# +ScoreBoardFile logs/apache_status + +# +# In the standard configuration, the server will process this file, +# srm.conf, and access.conf in that order. The latter two files are +# now distributed empty, as it is recommended that all directives +# be kept in a single file for simplicity. The commented-out values +# below are the built-in defaults. You can have the server ignore +# these files altogether by using "/dev/null" (for Unix) or +# "nul" (for Win32) for the arguments to the directives. +# +#ResourceConfig conf/srm.conf +#AccessConfig conf/access.conf + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +# +# Number of concurrent threads (i.e., requests) the server will allow. +# Set this value according to the responsiveness of the server (more +# requests active at once means they're all handled more slowly) and +# the amount of system resources you'll allow the server to consume. +# +ThreadsPerChild 50 + +# +# When NetWare creates a thread you need to specify the stack size. +# You may need to increase this if you get stack overflows. +# ThreadStackSize 65536 + +ThreadStackSize 65536 + +# +# MaxRequestsPerChild: the number of requests each child process is +# allowed to process before the child dies. The child will exit so +# as to avoid problems after prolonged use when Apache (and maybe the +# libraries it uses) leak memory or other resources. On most systems, this +# isn't really needed, but a few (such as Solaris) do have notable leaks +# in the libraries. For these platforms, set to something like 10000 +# or so; a setting of 0 means unlimited. +# +# NOTE: This value does not include keepalive requests after the initial +# request per connection. For example, if a child process handles +# an initial request and 10 subsequent "keptalive" requests, it +# would only count as 1 request towards this limit. +# +MaxRequestsPerChild 0 + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the <VirtualHost> +# directive. +# +#Listen 3000 +#Listen 12.34.56.78:80 + + +# +# BindAddress: You can support virtual hosts with this option. This directive +# is used to tell the server which IP address to listen to. It can either +# contain "*", an IP address, or a fully qualified Internet domain name. +# See also the <VirtualHost> and Listen directives. +# +#BindAddress * + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Please read the file http://httpd.apache.org/docs/dso.html for more +# details about the DSO mechanism and run `httpd -l' for the list of already +# built-in (statically linked and thus always available) modules in your httpd +# binary. +# +# Note: The order is which modules are loaded is important. Don't change +# the order below without expert advice. + +# LoadModule anon_auth_module modules/authanon.nlm +# LoadModule cern_meta_module modules/cernmeta.nlm +# LoadModule digest_module modules/digest.nlm +# LoadModule expires_module modules/expires.nlm +# LoadModule log_forensic_module modules/forensic.nlm +# LoadModule headers_module modules/headers.nlm +# LoadModule proxy_module modules/proxy.nlm +# LoadModule rewrite_module modules/rewrite.nlm +# LoadModule speling_module modules/speling.nlm +# LoadModule status_module modules/status.nlm +# LoadModule info_module modules/info.nlm +# LoadModule unique_id_module modules/uniqueid.nlm +# LoadModule usertrack_module modules/usrtrack.nlm +# LoadModule tls_module modules/mod_tls.nlm +# LoadModule vhost_alias_module modules/vhost.nlm + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# <VirtualHost> definition. These values also provide defaults for +# any <VirtualHost> containers you may define later in the file. +# +# All of these directives may appear inside <VirtualHost> containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# Port: The port to which the standalone server listens. For +# ports < 1023, you will need httpd to be run as root initially. +# +Port 80 + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. +# +ServerAdmin you@example.com + +# +# ServerName allows you to set a host name which is sent back to clients for +# your server if it's different than the one the program would get (i.e., use +# "www" instead of the host's real name). +# +# Note: You cannot just invent host names and hope they work. The name you +# define here must be a valid DNS name for your host. If you don't understand +# this, ask your network administrator. +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address (e.g., http://123.45.67.89/) +# anyway, and this will make redirections work in a sensible way. +# +ServerName 123.45.67.89 + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "sys:/apache/htdocs" + +# +# Each directory to which Apache has access, can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# permissions. +# +<Directory /> + Options FollowSymLinks + AllowOverride None +</Directory> + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# +<Directory "sys:/apache/htdocs"> +# +# This may also be "None", "All", or any combination of "Indexes", +# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# + Options Indexes FollowSymLinks MultiViews + +# +# This controls which options the .htaccess files in directories can +# override. Can also be "All", or any combination of "Options", "FileInfo", +# "AuthConfig", and "Limit" +# + AllowOverride None + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all +</Directory> + +# +# UserDir: The name of the directory which is appended onto a user's home +# directory if a ~user request is received. +# +<IfModule mod_userdir.c> + UserDir /home/*/public_html +</IfModule> + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# +#<Directory /home/*/public_html> +# AllowOverride FileInfo AuthConfig Limit +# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec +# <Limit GET POST OPTIONS PROPFIND> +# Order allow,deny +# Allow from all +# </Limit> +# <LimitExcept GET POST OPTIONS PROPFIND> +# Order deny,allow +# Deny from all +# </LimitExcept> +#</Directory> + +# +# DirectoryIndex: Name of the file or files to use as a pre-written HTML +# directory index. Separate multiple entries with spaces. +# +<IfModule mod_dir.c> + DirectoryIndex index.html +</IfModule> + +# +# AccessFileName: The name of the file to look for in each directory +# for access control information. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess files from being viewed by +# Web clients. Since .htaccess files often contain authorization +# information, access is disallowed for security reasons. Comment +# these lines out if you want Web visitors to see the contents of +# .htaccess files. If you change the AccessFileName directive above, +# be sure to make the corresponding changes here. +# +# Also, folks tend to use names such as .htpasswd for password +# files, so this will protect those as well. +# +<Files ~ "^\.ht"> + Order allow,deny + Deny from all + Satisfy All +</Files> + +# +# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each +# document that was negotiated on the basis of content. This asks proxy +# servers not to cache the document. Uncommenting the following line disables +# this behavior, and proxies will be allowed to cache the documents. +# +#CacheNegotiatedDocs + +# +# UseCanonicalName: (new for 1.3) With this setting turned on, whenever +# Apache needs to construct a self-referencing URL (a URL that refers back +# to the server the response is coming from) it will use ServerName and +# Port to form a "canonical" name. With this setting off, Apache will +# use the hostname:port that the client supplied, when possible. This +# also affects SERVER_NAME and SERVER_PORT in CGI scripts. +# +UseCanonicalName On + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +<IfModule mod_mime.c> + TypesConfig conf/mime.types +</IfModule> + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# mod_mime_magic is not part of the default server (you have to add +# it yourself with a LoadModule [see the DSO paragraph in the 'Global +# Environment' section], or recompile the server and include mod_mime_magic +# as part of the configuration), so it's enclosed in an <IfModule> container. +# This means that the MIMEMagicFile directive will only be processed if the +# module is part of the server. +# +<IfModule mod_mime_magic.c> + MIMEMagicFile conf/magic +</IfModule> + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# LogRotateDaily: If set to 'on' log files rotate daily. +# LogRotateInterval n: If set, log files rotate after n minutes. +# The LogRotateDaily and LogRotateInterval directives are mutually +# exclusive. The rotated log file name adds the date suffix of +# YYYYMMDD to identify when the log was rotated. +# +# LogRotateDaily on +# LogRotateInterval 86400 + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a <VirtualHost> +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a <VirtualHost> +# container, that host's errors will be logged there and not here. +# +ErrorLog logs/error_log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a <VirtualHost> +# container, they will be logged here. Contrariwise, if you *do* +# define per-<VirtualHost> access logfiles, transactions will be +# logged therein and *not* in this file. +# +CustomLog logs/access_log common + +# +# If you would like to have agent and referer logfiles, uncomment the +# following directives. +# +#CustomLog logs/referer_log referer +#CustomLog logs/agent_log agent + +# +# If you prefer a single logfile with access, agent, and referer information +# (Combined Logfile Format) you can use the following directive. +# +#CustomLog logs/access_log combined + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (error documents, FTP directory listings, +# mod_status and mod_info output etc., but not CGI generated documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +<IfModule mod_alias.c> + + # + # Note that if you include a trailing / on fakename then the server will + # require it to be present in the URL. So "/icons" isn't aliased in this + # example, only "/icons/". If the fakename is slash-terminated, then the + # realname must also be slash terminated, and if the fakename omits the + # trailing slash, the realname must also omit it. + # + Alias /icons/ "sys:/apache/icons/" + + <Directory "sys:/apache/icons"> + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all + </Directory> + + # This Alias will project the on-line documentation tree under /manual/ + # even if you change the DocumentRoot. Comment it if you don't want to + # provide access to the on-line documentation. + # + Alias /manual/ "sys:/apache/htdocs/manual/" + + <Directory "sys:/apache/htdocs/manual"> + Options Indexes FollowSymlinks MultiViews + AllowOverride None + Order allow,deny + Allow from all + </Directory> + + # + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the realname directory are treated as applications and + # run by the server when requested rather than as documents sent to the client. + # The same rules about trailing "/" apply to ScriptAlias directives as to + # Alias. + # + ScriptAlias /cgi-bin/ "sys:/apache/cgi-bin/" + + # + # "sys:/apache/cgi-bin" should be changed to whatever your ScriptAliased + # CGI directory exists, if you have that configured. + # + <Directory "sys:/apache/cgi-bin"> + AllowOverride None + Options None + Order allow,deny + Allow from all + </Directory> + +</IfModule> +# End of aliases. + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Format: Redirect old-URI new-URL +# + +# +# Directives controlling the display of server-generated directory listings. +# +<IfModule mod_autoindex.c> + + # + # FancyIndexing is whether you want fancy directory indexing or standard + # + IndexOptions FancyIndexing + + # + # AddIcon* directives tell the server which icon to show for different + # files or filename extensions. These are only displayed for + # FancyIndexed directories. + # + AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + + AddIconByType (TXT,/icons/text.gif) text/* + AddIconByType (IMG,/icons/image2.gif) image/* + AddIconByType (SND,/icons/sound2.gif) audio/* + AddIconByType (VID,/icons/movie.gif) video/* + + AddIcon /icons/binary.gif .bin .exe + AddIcon /icons/binhex.gif .hqx + AddIcon /icons/tar.gif .tar + AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv + AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip + AddIcon /icons/a.gif .ps .ai .eps + AddIcon /icons/layout.gif .html .shtml .htm .pdf + AddIcon /icons/text.gif .txt + AddIcon /icons/c.gif .c + AddIcon /icons/p.gif .pl .py + AddIcon /icons/f.gif .for + AddIcon /icons/dvi.gif .dvi + AddIcon /icons/uuencoded.gif .uu + AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl + AddIcon /icons/tex.gif .tex + AddIcon /icons/bomb.gif core + + AddIcon /icons/back.gif .. + AddIcon /icons/hand.right.gif README + AddIcon /icons/folder.gif ^^DIRECTORY^^ + AddIcon /icons/blank.gif ^^BLANKICON^^ + + # + # DefaultIcon is which icon to show for files which do not have an icon + # explicitly set. + # + DefaultIcon /icons/unknown.gif + + # + # AddDescription allows you to place a short description after a file in + # server-generated indexes. These are only displayed for FancyIndexed + # directories. + # Format: AddDescription "description" filename + # + #AddDescription "GZIP compressed document" .gz + #AddDescription "tar archive" .tar + #AddDescription "GZIP compressed tar archive" .tgz + + # + # ReadmeName is the name of the README file the server will look for by + # default, and append to directory listings. + # + # HeaderName is the name of a file which should be prepended to + # directory indexes. + # + ReadmeName README.html + HeaderName HEADER.html + + # + # IndexIgnore is a set of filenames which directory indexing should ignore + # and not include in the listing. Shell-style wildcarding is permitted. + # + IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + +</IfModule> +# End of indexing directives. + +# +# Document types. +# +<IfModule mod_mime.c> + + # + # AddType allows you to tweak mime.types without actually editing it, or to + # make certain files to be certain types. + # + AddType application/x-tar .tgz + + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # Despite the name similarity, the following Add* directives have nothing + # to do with the FancyIndexing customization directives above. + # + AddEncoding x-compress .Z + AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + #AddType application/x-compress .Z + #AddType application/x-gzip .gz .tgz + + # + # AddLanguage allows you to specify the language of a document. You can + # then use content negotiation to give a browser a file in a language + # it can understand. + # + # Note 1: The suffix does not have to be the same as the language + # keyword --- those with documents in Polish (whose net-standard + # language code is pl) may wish to use "AddLanguage pl .po" to + # avoid the ambiguity with the common suffix for perl scripts. + # + # Note 2: The example entries below illustrate that in quite + # some cases the two character 'Language' abbreviation is not + # identical to the two character 'Country' code for its country, + # E.g. 'Danmark/dk' versus 'Danish/da'. + # + # Note 3: In the case of 'ltz' we violate the RFC by using a three char + # specifier. But there is 'work in progress' to fix this and get + # the reference data for rfc1766 cleaned up. + # + # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) + # French (fr) - German (de) - Greek-Modern (el) + # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn) + # Portugese (pt) - Luxembourgeois* (ltz) + # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs) + # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) + # Russian (ru) + # + AddLanguage da .dk + AddLanguage nl .nl + AddLanguage en .en + AddLanguage et .ee + AddLanguage fr .fr + AddLanguage de .de + AddLanguage el .el + AddLanguage he .he + AddCharset ISO-8859-8 .iso8859-8 + AddLanguage it .it + AddLanguage ja .ja + AddCharset ISO-2022-JP .jis + AddLanguage kr .kr + AddCharset ISO-2022-KR .iso-kr + AddLanguage nn .nn + AddLanguage no .no + AddLanguage pl .po + AddCharset ISO-8859-2 .iso-pl + AddLanguage pt .pt + AddLanguage pt-br .pt-br + AddLanguage ltz .lu + AddLanguage ca .ca + AddLanguage es .es + AddLanguage sv .sv + AddLanguage cs .cz .cs + AddLanguage ru .ru + AddLanguage zh-TW .zh-tw + AddCharset Big5 .Big5 .big5 + AddCharset WINDOWS-1251 .cp-1251 + AddCharset CP866 .cp866 + AddCharset ISO-8859-5 .iso-ru + AddCharset KOI8-R .koi8-r + AddCharset UCS-2 .ucs2 + AddCharset UCS-4 .ucs4 + AddCharset UTF-8 .utf8 + + # LanguagePriority allows you to give precedence to some languages + # in case of a tie during content negotiation. + # + # Just list the languages in decreasing order of preference. We have + # more or less alphabetized them here. You probably want to change this. + # + <IfModule mod_negotiation.c> + LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw + </IfModule> + + # + # AddHandler allows you to map certain file extensions to "handlers", + # actions unrelated to filetype. These can be either built into the server + # or added with the Action command (see below) + # + # If you want to use server side includes, or CGI outside + # ScriptAliased directories, uncomment the following lines. + # + # To use CGI scripts: + # + #AddHandler cgi-script .cgi + + # + # To use server-parsed HTML files + # + #AddType text/html .shtml + #AddHandler server-parsed .shtml + + # + # Uncomment the following line to enable Apache's send-asis HTTP file + # feature + # + #AddHandler send-as-is asis + + # + # If you wish to use server-parsed imagemap files, use + # + #AddHandler imap-file map + + # + # To enable type maps, you might want to use + # + #AddHandler type-map var + +</IfModule> +# End of document types. + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# MetaDir: specifies the name of the directory in which Apache can find +# meta information files. These files contain additional HTTP headers +# to include when sending the document +# +#MetaDir .web + +# +# MetaSuffix: specifies the file name suffix for the file containing the +# meta information. +# +#MetaSuffix .meta + +# +# Customizable error response (Apache style) +# these come in three flavors +# +# 1) plain text +#ErrorDocument 500 "The server made a boo boo. +# n.b. the (") marks it as text, it does not get output +# +# 2) local redirects +#ErrorDocument 404 /missing.html +# to redirect to local URL /missing.html +#ErrorDocument 404 /cgi-bin/missing_handler.pl +# N.B.: You can redirect to a script or a document using server-side-includes. +# +# 3) external redirects +#ErrorDocument 402 http://www.example.com/subscription_info.html +# N.B.: Many of the environment variables associated with the original +# request will *not* be available to such a script. + +# +# Customize behaviour based on the browser +# +<IfModule mod_setenvif.c> + + # + # The following directives modify normal HTTP response behavior. + # The first directive disables keepalive for Netscape 2.x and browsers that + # spoof it. There are known problems with these browser implementations. + # The second directive is for Microsoft Internet Explorer 4.0b2 + # which has a broken HTTP/1.1 implementation and does not properly + # support keepalive when it is used on 301 or 302 (redirect) responses. + # + BrowserMatch "Mozilla/2" nokeepalive + BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 + + # + # The following directive disables HTTP/1.1 responses to browsers which + # are in violation of the HTTP/1.0 spec by not being able to grok a + # basic 1.1 response. + # + BrowserMatch "RealPlayer 4\.0" force-response-1.0 + BrowserMatch "Java/1\.0" force-response-1.0 + BrowserMatch "JDK/1\.0" force-response-1.0 + +</IfModule> + +# +# Allow server status reports, with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. +# +<IfModule mod_status.c> + <Location /server-status> + SetHandler server-status + Order deny,allow + Deny from all + Allow from .example.com + </Location> +</IfModule> + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# +<IfModule mod_info.c> + <Location /server-info> + SetHandler server-info + Order deny,allow + Deny from all + Allow from .example.com + </Location> +</IfModule> + +# +# There have been reports of people trying to abuse an old bug from pre-1.1 +# days. This bug involved a CGI script distributed as a part of Apache. +# By uncommenting these lines you can redirect these attacks to a logging +# script on phf.apache.org. Or, you can record them yourself, using the script +# support/phf_abuse_log.cgi. +# +#<Location /cgi-bin/phf*> +# Deny from all +# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi +#</Location> + +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. +# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> +# for further details before you try to setup virtual hosts. +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# If you want to use name-based virtual hosts you need to define at +# least one IP address (and port number) for them. +# +#NameVirtualHost 12.34.56.78:80 +#NameVirtualHost 12.34.56.78 + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# +#<VirtualHost ip.address.of.host.example.com> +# ServerAdmin webmaster@host.example.com +# DocumentRoot /www/docs/host.example.com +# ServerName host.example.com +# ErrorLog logs/host.example.com-error_log +# CustomLog logs/host.example.com-access_log common +#</VirtualHost> + +#<VirtualHost _default_:*> +#</VirtualHost> + +# +# SecureListen is the same as the Listen directive only it +# ensures the port will be secure. The second parameter +# specifies the certificate to use. "SSL CertificateIP" is +# the default. +# + +<IfModule mod_tls.c> + SecureListen 443 "SSL CertificateIP" +</IfModule> + |