diff options
Diffstat (limited to 'ACE/ace/config-hpux-11.00.h')
| -rw-r--r-- | ACE/ace/config-hpux-11.00.h | 506 |
1 files changed, 506 insertions, 0 deletions
diff --git a/ACE/ace/config-hpux-11.00.h b/ACE/ace/config-hpux-11.00.h new file mode 100644 index 00000000000..44513e885e4 --- /dev/null +++ b/ACE/ace/config-hpux-11.00.h @@ -0,0 +1,506 @@ +/* -*- C++ -*- */ +// $Id$ + +// The following configuration file is designed to work for HP +// platforms running HP-UX 11.00 using aC++, CC, or gcc (2.95 and up). + +#ifndef ACE_CONFIG_H +#define ACE_CONFIG_H +#include /**/ "ace/pre.h" + +#define ACE_LACKS_STDINT_H +#define ACE_LACKS_SYS_SELECT_H + +#if defined (__GNUG__) + +// config-g++-common.h undef's ACE_HAS_STRING_CLASS with -frepo, so +// this must appear before its #include. +# define ACE_HAS_STRING_CLASS + +# include "ace/config-g++-common.h" + +# if __GLIBC__ >= 2 + // glibc 2 and higher has wchar support +# define ACE_HAS_XPG4_MULTIBYTE_CHAR +# endif + +// gcc 2.95.2 supplies the ssize_t typedef. +# define ACE_HAS_SSIZE_T + +// We have to explicitly instantiate static template members +# define ACE_HAS_EXPLICIT_STATIC_TEMPLATE_MEMBER_INSTANTIATION + +// gcc 3.0 claims to have wide character stuff, but (at least the version +// built by HP) can't actually compile it. It refers to a wctype.h file +// that's only available with aC++. + +#else + +// The following configuration section is designed to work for HP +// platforms running HP/UX 11.x with either of the HP C++ compilers. +// There isn't a predefined macro for all cases of the compilers that +// can be used to tell them apart from other compilers +// only to tell C++ from aC++, using the value of __cplusplus. +// +// NOTE - HP advises people on 11.x to use aC++ since the older C++ doesn't +// support 64-bit or kernel threads. So, though this file has the C++ info +// in it, it's copied from the 10.x file and hasn't been verified. + +// There are 2 compiler-specific sections, plus a 3rd for common to both. +// First is the HP C++ section... +# if __cplusplus < 199707L + +# define ACE_HAS_BROKEN_HPUX_TEMPLATES + +// Compiler can't handle calls like foo->operator T *() +# define ACE_HAS_BROKEN_CONVERSIONS + +// Necessary with some compilers to pass ACE_TTY_IO as parameter to +// DEV_Connector. +# define ACE_NEEDS_DEV_IO_CONVERSION + +// Compiler's template mechanism must see source code (i.e., .C files). +# define ACE_TEMPLATES_REQUIRE_SOURCE + +// Compiler's template mechanism requires the use of explicit C++ +// specializations for all used templates. +# define ACE_HAS_EXPLICIT_TEMPLATE_INSTANTIATION + +// The HP/UX compiler doesn't support volatile!!!! +# define volatile + +# else // aC++ definitions + +// Parts of TAO (at least) use __HP_aCC to detect this compiler, but the +// macro is not set until A.03.13. If it's not set, set it - it won't be an +// HP-advertised value, but we don't check the value/version - just whether +// it's set or not. +# if !defined (__HP_aCC) +# define __HP_aCC +# endif /* __HP_aCC */ + +// Precompiler needs extra flags to ignore "invalid #pragma directive" +# define ACE_CC_PREPROCESSOR_ARGS "-E +W 67" + +// Compiler can't handle calls like foo->operator T *() +# define ACE_HAS_BROKEN_CONVERSIONS + +// Compiler supports C++ exception handling. It's on by default. If the +// +noeh compiler option is used to disable exceptions, the compiler defines +// __HPACC_NOEH. +# if !defined (__HPACC_NOEH) +# define ACE_HAS_EXCEPTIONS 1 +# endif + +// If the -AA compile option is used, the compiler defines _HP_NAMESPACE_STD. +// The -AA option enables the 2.0 standard C++ library. If not used, then +// we have the old, 1.2.1 C++ library. +# if defined (_HP_NAMESPACE_STD) +# if defined (ACE_HAS_STANDARD_CPP_LIBRARY) +# undef ACE_HAS_STANDARD_CPP_LIBRARY +# endif +# define ACE_HAS_STANDARD_CPP_LIBRARY 1 +# if defined (ACE_USES_STD_NAMESPACE_FOR_STDCPP_LIB) +# undef ACE_USES_STD_NAMESPACE_FOR_STDCPP_LIB +# endif +# define ACE_USES_STD_NAMESPACE_FOR_STDCPP_LIB 1 +# else +# define ACE_USES_OLD_IOSTREAMS +# endif /* _HP_NAMESPACE_STD */ + +# define ACE_HAS_TYPENAME_KEYWORD + +// Compiler implements templates that support typedefs inside of classes +// used as formal arguments to a template class. +# define ACE_HAS_TEMPLATE_TYPEDEFS + +# define ACE_HAS_WORKING_EXPLICIT_TEMPLATE_DESTRUCTOR + +// Platform lacks streambuf "linebuffered ()". +# define ACE_LACKS_LINEBUFFERED_STREAMBUF 1 + +// Lack of (and broken) support for placement operator delete is a known +// bug by HP, up until aC++ A.03.55.02. +# if (__HP_aCC < 35502) +# define ACE_LACKS_PLACEMENT_OPERATOR_DELETE +# endif /* __HP_aCC < 35502 */ + +// Compiler's 'new' throws exceptions on failure, regardless of whether or +// not exception handling is enabled in the compiler options. Fortunately, +// new(nothrow_t) is offered. +# define ACE_NEW_THROWS_EXCEPTIONS +# define ACE_HAS_NEW_NOTHROW +# define ACE_HAS_NEW_NO_H 1 + +// Compiler's template mechanism must see source code (i.e., .C files). +# define ACE_TEMPLATES_REQUIRE_SOURCE + +// Compiler supports template specialization. +# define ACE_HAS_TEMPLATE_SPECIALIZATION + +// Preprocessor needs some help with data types +# if defined (__LP64__) +# define ACE_SIZEOF_LONG 8 +# else +# define ACE_SIZEOF_LONG 4 +# endif + +// Platform has XPG4 wide character support +# define ACE_HAS_XPG4_MULTIBYTE_CHAR +# define ACE_HAS_WCHAR +# define ACE_SIZEOF_WCHAR _WCHAR_T + +# endif /* __cplusplus < 199707L */ + +// Compiler supports the ssize_t typedef. +# define ACE_HAS_SSIZE_T + +// Compiler doesn't handle 'signed char' correctly (used in ace/IOStream.h) +# define ACE_LACKS_SIGNED_CHAR + +#endif /* __GNUG__, HP */ + +//********************************************************************* +// +// From here down is the compiler-INdependent OS settings. +// +//********************************************************************* + +// Compiling for HPUX. +#if !defined (HPUX) +#define HPUX +#endif /* HPUX */ +#define HPUX_11 + +#ifndef _HPUX_SOURCE +#define _HPUX_SOURCE +#endif + +#include /**/ <sys/stdsyms.h> + +#if defined (_INCLUDE_HPUX_SOURCE) +# define ACE_HAS_SNPRINTF +#endif + +// HP-UX is a POSIX-compliant system - see what's available. +#include "ace/config-posix.h" + +// config-posix.h sets up ACE_HAS_AIO_CALLS if the headers define the +// proper things. In HP-UX 11's case, the AIOCB Proactor works the best +// overall. If the user hasn't overridden it, select AIOCB. +#if defined (ACE_HAS_AIO_CALLS) +# if !defined (ACE_POSIX_AIOCB_PROACTOR) && !defined (ACE_POSIX_SIG_PROACTOR) +# define ACE_POSIX_AIOCB_PROACTOR +# endif /* !ACE_HAS_POSIX_AIOCB_PROACTOR && !ACE_POSIX_SIG_PROACTOR */ +#endif /* ACE_HAS_AIO_CALLS */ + +//////////////////////////////////////////////////////////////////////////// +// +// General OS information - see README for more details on what they mean +// +/////////////////////////////////////////////////////////////////////////// + +// HP/UX needs to have these addresses in a special range. +// If this is on a 64-bit model, the default is to use 64-bit addressing. +// It can also be set so that the mapped region is shareable with 32-bit +// programs. To enable the 32/64 sharing, comment out the first definition +// of ACE_DEFAULT_BASE_ADDR and uncomment the two lines after it. +#if defined (__LP64__) +# define ACE_DEFAULT_BASE_ADDR ((char *) 0x0000001100000000) +//# define ACE_DEFAULT_BASE_ADDR ((char *) 0x80000000) +//# define ACE_OS_EXTRA_MMAP_FLAGS MAP_ADDR32 + +# define ACE_DEFAULT_BASE_ADDRL (0x0000001100000000) +//# define ACE_DEFAULT_BASE_ADDRL (0x80000000) +#else +# define ACE_DEFAULT_BASE_ADDR ((char *) 0x80000000) +#endif /* __LP64__ */ + +// Platform can do async I/O (aio_*) (set up in config-posix.h) +// ... but seems to require this in order to keep from hanging. Needs some +// investigation, maybe with HP. John Mulhern determined this value +// empirically. YMMV. If it does vary, set it up in your own config.h which +// then includes the ACE-supplied config. +#if !defined (ACE_INFINITE) +# define ACE_INFINITE 10000000 +#endif + +/* Compiler/platform correctly calls init()/fini() for shared libraries. */ +#define ACE_HAS_AUTOMATIC_INIT_FINI 1 + +// Manually tweak the malloc control block paddings to properly align +// things. +#define ACE_MALLOC_PADDING 16 +#define ACE_MALLOC_ALIGN 8 +#define ACE_PI_CONTROL_BLOCK_ALIGN_LONGS 3 + +// Compiler/platform contains the <sys/syscall.h> file. +#define ACE_HAS_SYS_SYSCALL_H + +#define ACE_HAS_SYS_PSTAT_H + +// But doesn't have a prototype for syscall() +#define ACE_LACKS_SYSCALL + +// Platform supports POSIX.1b clock_gettime () +#define ACE_HAS_CLOCK_GETTIME +#define ACE_HAS_CLOCK_SETTIME + +// Prototypes for both signal() and struct sigaction are consistent. +#define ACE_HAS_CONSISTENT_SIGNAL_PROTOTYPES + +// Compiler/platform has correctly prototyped header files. +#define ACE_HAS_CPLUSPLUS_HEADERS + +// Compiler/platform has Dirent iterator functions. +#define ACE_HAS_DIRENT + +// Platform supports getpagesize() call +#define ACE_HAS_GETPAGESIZE +// But we define this just to be safe +#define ACE_PAGE_SIZE 4096 + +// Can run gperf on this platform (needed for TAO) +# define ACE_HAS_GPERF + +// Optimize ACE_Handle_Set for select(). +# define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT + +// Platform supports IP multicast +#define ACE_HAS_IP_MULTICAST +// At least for 11iv2, lacks perfect filtering. +#if (HPUX_VERS >= 1123) && !defined (ACE_LACKS_PERFECT_MULTICAST_FILTERING) +# define ACE_LACKS_PERFECT_MULTICAST_FILTERING 1 +#endif + +/* Platform defines MAP_FAILED as a long constant. */ +#define ACE_HAS_LONG_MAP_FAILED 1 + +/* Define to 1 if platform has memchr(). */ +#define ACE_HAS_MEMCHR 1 + +// Platform supports recvmsg and sendmsg. +#define ACE_HAS_MSG + +// Platform's select() has non-const timeval argument +#define ACE_HAS_NONCONST_SELECT_TIMEVAL + +// Compiler/platform supports poll(). +#define ACE_HAS_POLL + +/* Platform supports "position-independent" features provided by + ACE_Based_Pointer<>. */ +#define ACE_HAS_POSITION_INDEPENDENT_POINTERS 1 + +/* Platform supports POSIX getpwnam_r() function */ +#define ACE_HAS_POSIX_GETPWNAM_R 1 + +// Platform supports POSIX O_NONBLOCK semantics. +#define ACE_HAS_POSIX_NONBLOCK + +// Platform supports the POSIX struct timespec type +#define ACE_HAS_POSIX_TIME + +/* Platform has pread() and pwrite() support. */ +#define ACE_HAS_P_READ_WRITE 1 + +/* Platform will recurse infinitely on thread exits from TSS cleanup routines + (e.g., AIX) */ +#define ACE_HAS_RECURSIVE_THR_EXIT_SEMANTICS 1 + +// Platform supports reentrant functions (all the POSIX *_r functions). +#define ACE_HAS_REENTRANT_FUNCTIONS +// ctime_r and asctime_r conform to POSIX.1c (2 param version) +#define ACE_HAS_2_PARAM_ASCTIME_R_AND_CTIME_R + +// Platform offers scandir(), and requires no adjustments for its API. +#define ACE_HAS_SCANDIR + +// HP-UX 11 has reentrant netdb functions. The catch is that the old +// functions (gethostbyname, etc.) are thread-safe and the _r versions are +// not used and will be removed at some point. So, define things so +// the _r versions are not used. This will slow things down a bit due to +// the extra mutex lock in the ACE_NETDBCALL_RETURN macro, and will be fixed +// in the future (problem ID P64). +#define ACE_LACKS_NETDB_REENTRANT_FUNCTIONS + +/* Platform lacks pri_t (e.g., Tandem NonStop UNIX). */ +#define ACE_LACKS_PRI_T 1 + +// Platform has shm_open +#define ACE_HAS_SHM_OPEN + +// Compiler/platform defines the sig_atomic_t typedef +#define ACE_HAS_SIG_ATOMIC_T + +/* Compiler requires extern "C" functions for signals. */ +#define ACE_HAS_SIG_C_FUNC 1 + +// Platform's sigaction() function takes const sigaction* as 2nd parameter. +#define ACE_HAS_SIGACTION_CONSTP2 + +// Platform supports SVR4 extended signals +#define ACE_HAS_SIGINFO_T + +/* Define to 1 if platform has sigsuspend(). */ +#define ACE_HAS_SIGSUSPEND 1 + +// Platform doesn't detect a signal out of range unless it's way out of range. +#define ACE_HAS_SIGISMEMBER_BUG + +/* Platform provides socklen_t type, such as Linux with glibc2. */ +#define ACE_HAS_SOCKLEN_T 1 + +/* Platform/compiler supports _sys_errlist symbol */ +#define ACE_HAS_SYS_ERRLIST 1 + +#define ACE_HAS_UALARM + +// Platform supports ucontext_t (which is used in the extended signal API). +#define ACE_HAS_UCONTEXT_T + +// Compiler/platform supports strerror (). +#define ACE_HAS_STRERROR + +// Platform/compiler supports void * as second parameter to gettimeofday(). +#define ACE_HAS_VOIDPTR_GETTIMEOFDAY + +/* Platform requires void * for mmap(). */ +#define ACE_HAS_VOIDPTR_MMAP 1 + +/* OS/compiler uses void * arg 4 setsockopt() rather than const char * */ +#define ACE_HAS_VOIDPTR_SOCKOPT 1 + +// Platform supports SVR4 dynamic linking semantics. +// When used, this requires -ldl on the ACE library link line. +#define ACE_HAS_SVR4_DYNAMIC_LINKING + +// Platform supports the getrusage() system call. +#define ACE_HAS_GETRUSAGE + +/* Define to 1 if platform has the declaration of getrusage(). */ +#define ACE_HAS_GETRUSAGE_PROTOTYPE 1 + +// Platform has the sigwait function in a header file +#define ACE_HAS_SIGWAIT +#define ACE_HAS_SIGTIMEDWAIT + +// Platform supports System V IPC (most versions of UNIX, but not Win32) +#define ACE_HAS_SYSV_IPC + +// accept() is thread-safe +#define ACE_HAS_THREAD_SAFE_ACCEPT + +// Platform lacks a typedef for timespec_t, but has struct timespec +#define ACE_LACKS_TIMESPEC_T + +// dlopen() takes a char* instead of const char* +#define ACE_HAS_CHARPTR_DL + +// lacks setegid and seteuid +#define ACE_LACKS_SETEGID +#define ACE_LACKS_SETEUID + +#define ACE_LACKS_SUSECONDS_T +#define ACE_LACKS_SYS_SYSCTL_H + +// Shared library name/path components +#if defined (__ia64) +# define ACE_DLL_SUFFIX ".so" +#else +# define ACE_DLL_SUFFIX ".sl" +#endif /* __ia64 */ +#if defined (__LP64__) +# define ACE_LD_SEARCH_PATH "LD_LIBRARY_PATH" +#else +# define ACE_LD_SEARCH_PATH "SHLIB_PATH" +#endif /* __LP64__ */ + +#if defined (_INCLUDE__STDC_A1_SOURCE) +# define ACE_HAS_3_PARAM_WCSTOK +#endif + +////////////////////////////////////////////////////////////////////////// +// +// STREAMS information +// +////////////////////////////////////////////////////////////////////////// + +// Platform supports STREAMS +#define ACE_HAS_STREAMS +// Compiler/platform supports struct strbuf. +#define ACE_HAS_STRBUF_T +// But the putmsg signature doesn't have it as const... +// Well, it really does, but it depends on preprocessor defines. +#define ACE_LACKS_CONST_STRBUF_PTR +/* Platform supports TLI timod STREAMS module */ +#define ACE_HAS_TIMOD_H 1 + +// Platform supports STREAM pipes +// This is possible, but not by default - need to rebuild the kernel to +// get them enabled - see pipe(2) and "STREAMS/UX for the HP 9000" +// #define ACE_HAS_STREAM_PIPES + +///////////////////////////////////////////////////////////////////////// +// +// TLI/XTI information +// +//////////////////////////////////////////////////////////////////////// + +// Platform supports XTI (includes TLI). +#define ACE_HAS_XTI +// HP-UX 11 conforms to the XPG4 spec, which ACE calls broken for the +// errmsg not being const... +#define ACE_HAS_BROKEN_T_ERROR +// The definitions of TCP_NODELAY and TCP_MAXSEG conflict between +// sys/xti.h and netinet/tcp.h. +#define ACE_HAS_CONFLICTING_XTI_MACROS +/* Platform provides <sys/xti.h> header */ +#define ACE_HAS_SYS_XTI_H 1 + +///////////////////////////////////////////////////////////////////////// +// +// Threads information. +// +// Use of threads is controlled by the 'threads' argument to make. See +// include/makeinclude/platform_hpux_aCC.GNU for details. If it's not set, +// the default is to enable it, since kernel threads are always available +// on HP-UX 11, as opposed to 10.x where it was optional software. +// +//////////////////////////////////////////////////////////////////////// + +#if defined (ACE_HAS_THREADS) +# if (ACE_HAS_THREADS == 0) +# undef ACE_HAS_THREADS +# endif /* ACE_HAS_THREADS == 0 */ +#else +# define ACE_HAS_THREADS +#endif /* ACE_HAS_THREADS */ + +#if defined (ACE_HAS_THREADS) + +# if !defined (ACE_MT_SAFE) +# define ACE_MT_SAFE 1 +# endif + +// HP-UX doesn't define _POSIX_THREADS since it doesn't implement all +// features (lacks thread priority inheritance and protection), so +// config-posix.h doesn't get this one... +# define ACE_HAS_PTHREADS + +# define ACE_HAS_PTHREADS_STD +# define ACE_HAS_PTHREADS_UNIX98_EXT +# define ACE_HAS_PTHREAD_CONTINUE +# define ACE_HAS_PTHREAD_RESUME_NP +# define ACE_HAS_PTHREAD_SUSPEND +# define ACE_HAS_RECURSIVE_MUTEXES +# define ACE_HAS_THREAD_SPECIFIC_STORAGE +#endif /* ACE_HAS_THREADS */ + +#define ACE_HAS_POSIX_SEM + +// Platform has POSIX terminal interface. +#define ACE_HAS_TERMIOS + +#include /**/ "ace/post.h" +#endif /* ACE_CONFIG_H */ |